1 2005-05-19 Ben Elliston <bje@au.ibm.com>
3 * readelf.c (read_and_display_attr_value): Handle a DW_AT_encoding
4 value of DW_ATE_GNU_decimal_float.
6 2005-05-17 Daniel Jacobowitz <dan@codesourcery.com>
8 * doc/Makefile.am (config.texi): Don't use $<.
9 * doc/Makefile.in: Regenerated.
11 2005-05-15 Yitzchak Scott-Thoennes <sthoenna@efn.org>
13 * deflex.l: Ignore CRs
15 2005-05-15 Daniel Jacobowitz <dan@codesourcery.com>
17 * acinclude.m4: Remove obsolete code.
18 * configure.in: Update AC_PREREQ.
19 * doc/Makefile.am (binutils_TEXINFOS): Define.
20 (config.texi): Depend on distributed files instead of built
22 (binutils.dvi, binutils.info): Remove unnecessary rules.
23 (DISTCLEANFILES): Remove.
24 (install-data-local): Renamed from install.
25 (info-local): Renamed from info.
26 * Makefile.in, aclocal.m4, config.in, configure,
27 doc/Makefile.in: Regenerated.
29 2005-05-14 Alan Modra <amodra@bigpond.net.au>
31 * readelf.c (get_ppc_dynamic_type): Display DT_PPC_GOT, not
34 2005-05-13 Fred Fish <fnf@specifixinc.com>
36 * readelf.c: Fix a couple of obvious comment typos,
37 'debug_str' -> 'debug_ranges' and proecess' -> 'process'.
39 2005-05-13 H.J. Lu <hongjiu.lu@intel.com>
41 * readelf.c (dump_ia64_unwind): Get stamp with proper size.
43 2005-05-12 Nick Clifton <nickc@redhat.com>
45 * readelf.c (display_debug_lines): If pointer_size has not been
46 found then assume that it is 4 in order to prevent a seg fault
47 when process_extend_line_op attempts to read the line data.
49 2005-05-11 Alan Modra <amodra@bigpond.net.au>
51 * readelf.c (get_ppc_dynamic_type): New function for DT_PPC_GLINK.
52 (get_dynamic_type): Call the above.
54 2005-05-07 Nick Clifton <nickc@redhat.com>
56 * Update the address and phone number of the FSF organization in
57 the GPL notices in the following files:
58 aclocal.m4, addr2line.c, ar.c, arlex.l, arparse.y, arsup.c,
59 arsup.h, binemul.c, binemul.h, bucomm.c, bucomm.h, budbg.h,
60 budemang.c, budemang.h, coffdump.c, coffgrok.c, coffgrok.h,
61 cxxfilt.c, debug.c, debug.h, deflex.l, defparse.y, dlltool.c,
62 dlltool.h, dllwrap.c, emul_aix.c, emul_vanilla.c, filemode.c,
63 ieee.c, nlmconv.c, nlmconv.h, nlmheader.y, nm.c, objcopy.c,
64 objdump.c, prdbg.c, rclex.l, rcparse.y, rdcoff.c, rddbg.c,
65 readelf.c, rename.c, resbin.c, rescoff.c, resrc.c, resres.c,
66 size.c, srconv.c, stabs.c, strings.c, sysdump.c, sysinfo.y,
67 syslex.l, unwind-ia64.c, unwind-ia64.h, version.c, windres.c,
68 windres.h, winduni.c, winduni.h wrstabs.c, doc/fdl.texi
70 2005-05-06 Jan Beulich <jbeulich@novell.com>
72 * objcopy.c (copy_file): Don't delete output upon error here.
73 (copy_main): Delete output upon error.
75 2005-05-02 Ben Elliston <bje@au.ibm.com>
77 * dlltool.c (dtab): Remove empty function.
78 (process_duplicates): Remove calls to dtab().
80 2005-05-01 Maciej W. Rozycki <macro@linux-mips.org>
82 * doc/binutils.texi (strip, objcopy): Clarify the description of
83 the "--strip-debug" option. Fix a typo.
85 2005-04-29 H.J. Lu <hongjiu.lu@intel.com>
87 * bucomm.c: Undo the last change.
90 2005-04-29 Ben Elliston <bje@au.ibm.com>
92 * syslex.l (word, number, unit): Remove unused variables.
93 * nlmheader.y (keyword_tokens): Make static.
94 * coffdump.c (dump_coff_symbol, coff_dump): Make static.
95 * coffgrok.c (lofile, last_function_symbol, last_function_type,
96 last_struct, last_enum, cur_sfile): Make variables static.
97 * sysdump.c (getCHARS, fillup, getBARRAY, getINT, getBITS,
98 sysroff_swap_tr_in, sysroff_print_tr_out): Make static.
99 * sysinfo.y (writecode, it, code, repeat, oldrepeat, name, rdepth,
100 names, pnames): Likewise.
102 2005-04-29 Ben Elliston <bje@au.ibm.com>
104 * ar.c (mri_mode): Make static.
105 * arsup.c (obfd, real_name, outfile): Likewise.
106 * binemul.c (ar_emul_create): Remove unused function.
107 (ar_emul_default_create): Likewise.
108 * binemul.h (ar_emul_create): Remove declaration.
109 (ar_emul_default_create): Likewise.
110 (struct bin_emulation_xfer_struct): Remove ar_create member.
111 * bucomm.c (report): Make static.
112 * bucomm.h (report): Remove declaration.
113 * cxxfilt.c (mbuffer): Make static.
114 (main): Use unsigned ints for some loop control variables.
115 * readelf.c: Make many global variables static.
116 * size.c (berkeley_format): Make static.
117 (long_options): Likewise.
118 * emul_aix.c (bin_aix_emulation): Remove ar_emul_default_create
119 structure initialiser.
120 (bin_aix5_emulation): Likewise.
121 * emul_vanilla.c (bin_vanilla_emulation): Likewise.
123 2005-04-27 Ben Elliston <bje@au.ibm.com>
125 * syslex.l: Adjust top-of-file comment: this file is part of GNU
126 binutils, not GNU ld.
128 2005-04-25 Nick Clifton <nickc@redhat.com>
131 * objcopy.c (copy_archive): Initialise 'obfd' field of new
134 * objcopy.c (copy_usage): Fix description of -K switch.
136 * doc/binutils.texi (strip, objcopy): Fix description of -K
139 2005-04-20 Daniel Jacobowitz <dan@codesourcery.com>
141 * readelf.c (display_debug_frames): Use data factor for
142 DW_CFA_def_cfa_sf and DW_CFA_def_cfa_offset_sf.
144 2005-04-19 H.J. Lu <hongjiu.lu@intel.com>
146 * objdump.c (dump_section_header): Skip linker created section.
148 2005-04-17 H.J. Lu <hongjiu.lu@intel.com>
150 * objdump.c (dump_section_header): Support SEC_GROUP.
152 2005-04-16 Nick Clifton <nickc@redhat.com>
154 * readelf.c (debug_apply_rela_addends): Remove redundant %s from
157 2005-04-15 Nick Clifton <nickc@redhat.com>
159 * objcopy.c (copy_file): Issue an error message when attmepting to
160 copy an empty input file.
162 2005-04-14 Alan Modra <amodra@bigpond.net.au>
164 * Makefile.am (NO_WERROR): Define. Use instead of -Wno-error.
165 * configure.in: Include ../bfd/warning.m4 contents.
166 * Makefile.in: Regenerate.
167 * configure: Regenerate.
168 * doc/Makefile.in: Regenerate.
170 2005-04-12 Alan Modra <amodra@bigpond.net.au>
172 * Makefile.am: Run "make dep-am".
173 (syslex.o, sysinfo.o, arparse.o, arlex.o): Add -Wno-error to command.
174 (sysroff.o, defparse.o, deflex.o): Likewise.
175 (nlmheader.o, rcparse.o, rclex.o): Likewise.
176 * Makefile.in: Regenerate.
177 * aclocal.m4: Regenerate.
178 * config.in: Regenerate.
179 * configure: Regenerate.
181 2005-04-11 Jan Beulich <jbeulich@novell.com>
183 * MAINTAINERS: Add myself as ix86 Intel mode maintainer.
185 2005-04-06 Nick Clifton <nickc@redhat.com>
186 H.J. Lu <hongjiu.lu@intel.com>
188 * po/rw.po: New translation: Kinyarwanda.
189 * configure.in (ALL_LINGUAS): Add rw.
190 * configure: Regenerate.
192 2005-04-04 Maciej W. Rozycki <macro@linux-mips.org>
194 * readelf.c (debug_apply_rela_addends): Reorder r_info as
195 necessary for 64-bit MIPS.
197 2005-04-04 Maciej W. Rozycki <macro@linux-mips.org>
199 * doc/binutils.texi (readelf): Remove a duplicate paragraph.
201 2005-04-04 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>
204 * objdump.c (dump_symbols): Add a check to see if the section for
205 the symbol is chosen using process_section_p.
207 2005-04-01 H.J. Lu <hongjiu.lu@intel.com>
209 * NEWS: Mention new readelf options, "-N/--full-section-name"
210 and "-g/--section-groups".
212 * doc/binutils.texi: Document new readelf options,
213 "-N/--full-section-name" and "-g/--section-groups".
215 2005-03-31 H.J. Lu <hongjiu.lu@intel.com>
217 * readelf.c (do_full_section_name): New.
218 (options): Add "--full-section-name"/'N'.
219 (usage): Add -N/--full-section-name.
220 (parse_args): Handle 'N'.
221 (process_section_headers): Print out the full section name if
222 do_full_section_name isn't 0.
224 2005-03-31 Nick Clifton <nickc@redhat.com>
226 * configure.in: Add a check for <unistd.h> providing a prototype
227 for getopt() which is compatible with the one in
228 include/getopt.h. If so then define HAVE_DECL_GETOPT.
229 * configure: Regenerate.
230 * config.in (HAVE_DECL_GETOPT): Add.
231 * aclocal.m4: Regenerate.
232 * addr2line.c: Include "config.h" before "bfd.h" so that
233 HAVE_DECL_GETOPT is defined before getopt.h is included.
235 2005-03-21 Jan-Benedict Glaw <jbglaw@lug-owl.de>
237 * doc/binutils.texi: Document new VAX disassembler-specific option
239 * NEWS: Mention the new option.
241 2005-03-29 Anil Paranjpe <anilp1@kpitcummins.com>
243 * MAINTAINERS: Add myself as H8300 maintainer.
245 2005-03-28 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
247 * objdump.c (disassemble_bytes): Remove cast.
249 2005-03-25 Daniel Jacobowitz <dan@codesourcery.com>
251 * BRANCHES: Add binutils-csl-arm-2005q1-branch and
252 binutils-2_16-branch.
254 2005-03-25 Mark Kettenis <kettenis@gnu.org>
256 * MAINTAINERS: Add myself as M88k maintainer.
258 2005-03-24 Danny Smith <dannysmith@users.sourceforge.net>
260 * winduni.c (unicode_from_ascii): Don't declare variables
261 's' and 'w' if _WIN32. Use MultiByteToWideChar to set the unicode
264 2005-03-24 Dmitry Diky <diwil@spec.ru>
266 * MAINTAINERS: Add myself as MSP430 maintainer.
268 2005-03-23 Nick Clifton <nickc@redhat.com>
270 * po/fr.po: Updated translation.
272 2005-03-22 Nick Clifton <nickc@redhat.com>
274 * MAINTAINERS: Add Daniel Jacobwitz to the blanket write
277 2005-03-17 Paul Brook <paul@codesourcery.com>
278 Dan Jacobowitz <dan@codesourcery.com>
279 Mark Mitchell <mark@codesourcery.com>
281 * binutils/readelf.c (get_arm_segment_type): New function.
282 (get_segment_type): Use it.
284 2005-03-18 Paul Brook <paul@codesourcery.com>
286 * objdump.c (objdump_print_addr): Avoid uninitialized warning.
288 2005-03-17 Diego Novillo <dnovillo@redhat.com>
290 * MAINTAINERS: Remove self as maintainer of x86 intel
293 2005-03-16 Nick Clifton <nickc@redhat.com>
294 Ben Elliston <bje@au.ibm.com>
296 * configure.in (werror): New switch: Add -Werror to the
297 compiler command line. Enabled by default. Disable via
299 * configure: Regenerate.
301 2005-03-15 Daniel Marques <marques@cs.cornell.edu>
302 Nick Clifton <nickc@redhat.com>
304 * objcopy.c (globalize_specific_list): New linked list of symbols
305 to convert from local binding into global binding.
306 (command_line_switch): Add OPTION_GLOBALIZE_SYMBOL and
307 OPTION_GLOBALIZE_SYMBOLS.
308 (copy_options): Add "globalize-symbol" and "globalize-symbols".
309 (copy_usage): Document the new switches.
310 (filter_symbols): Convert defined local symbols mentioned on the
311 globalize_specific_list into global symbols.
312 (copy_object): Perform actions if the globalize_specific_list is
314 (copy_main): Handle new switches.
315 * NEWS: Mention new feature.
316 * doc/binutils.texi: Document new switches.
318 2005-03-15 Alan Modra <amodra@bigpond.net.au>
320 * po/es.po: Commit new Spanish translation.
322 * po/fr.po: Commit new French translation.
324 2005-03-14 Alan Modra <amodra@bigpond.net.au>
326 * po/tr.po: Commit new Turkish translation.
328 2005-03-11 Nick Clifton <nickc@redhat.com>
330 * po/fr.po: Updated French translation.
332 2005-03-10 Nick Clifton <nickc@redhat.com>
334 * configure.in (ALL_LINGUAS): Add Romanian lingua "ro".
335 * configure: Regenerate.
336 * po/ro.po: New file.
338 * po/ru.po: Updated file.
340 2005-03-05 Alan Modra <amodra@bigpond.net.au>
342 * po/binutils.pot: Regenerate.
344 2005-03-02 Jan Beulich <jbeulich@novell.com>
346 * ar.c (remove_output): Use unlink_if_ordinary instead of unlink.
347 * objcopy.c (copy_file): Likewise.
348 (strip_main): Likewise.
350 2005-03-01 Stig Petter Olsroed <stigpo@users.sourceforge.net>
351 Nick Clifton <nickc@redhat.com>
353 * objdump.c: Fix coding for DISASSEMBLER_NEEDS_RELOC:
354 (struct objdump_disasm_info): Add 'reloc' field.
355 (disassemble_bytes): Fix check for when an insn has a reloc
356 associated with it. Improve comment explaining why the use of
357 octets is wrong. Set the 'reloc' field in objdump_disasm_info
359 (objdump_print_addr): Use new 'reloc' field to lookup the correct
360 address for the symbol associated with the current instruction's
362 (disassemble_info): Initialise 'reloc' field.
364 2005-02-28 Jakub Jelinek <jakub@redhat.com>
366 * readelf.c (get_file_type, get_machine_name, get_osabi_name,
367 get_segment_type, get_section_type_name, get_elf_class,
368 get_data_encoding, get_group_flags, dynamic_section_mips_val,
369 get_symbol_binding, get_symbol_type, get_TAG_name, get_FORM_name,
370 get_AT_name, process_mips_specific, process_gnu_liblist,
371 get_note_type, get_netbsd_elfcore_note_type): Use snprintf instead of
372 sprintf where needed.
373 (get_dynamic_type): Likewise. Increase buff to 64 bytes.
374 (get_elf_section_flags): Increase buff to 33 bytes. Avoid
376 (get_dynamic_flags): Renamed to...
377 (print_dynamic_flags): ... this. Print the flags to stdout instead
378 of returning them as string.
379 (process_dynamic_section): Adjust caller.
381 2005-02-25 H.J. Lu <hongjiu.lu@intel.com>
383 * readelf.c (display_debug_ranges): Print out offset for end of
386 2005-02-23 Alan Modra <amodra@bigpond.net.au>
388 * dlltool.c: Warning fixes.
389 * objdump.c: Likewise.
391 2005-02-22 Alan Modra <amodra@bigpond.net.au>
393 * Makefile.am (syslex.o, sysinfo.o): Pass AM_CFLAGS to compiler.
394 (syslex.o, sysinfo.o, dlltool.o, rescoff.o): Remove duplicate
395 dependencies. Run "make dep-am".
396 * nlmconv.c: Warning fixes.
397 * readelf.c: Likewise.
398 * srconv.c: Likewise.
399 * sysdump.c: Likewise.
400 * sysinfo.y: Likewise.
401 * syslex.l: Likewise. Use yyleng instead of strlen, memcpy instead
403 * Makefile.in: Regenerate.
405 2005-02-21 H.J. Lu <hongjiu.lu@intel.com>
407 * objcopy.c (parse_flags): Replace SEC_SHARED with
410 * objdump.c (dump_section_header): Dump SEC_TIC54X_BLOCK and
411 SEC_TIC54X_CLINK for TI c54x only. Remove SEC_ARCH_BIT_0. Dump
412 SEC_COFF_SHARED for COFF only.
414 2005-02-21 Alan Modra <amodra@bigpond.net.au>
416 * Makefile.am: Run "make dep-am"
417 * Makefile.in: Regenerate.
418 * doc/Makefile.in: Regenerate.
420 2005-02-21 Alan Modra <amodra@bigpond.net.au>
422 * readelf.c (BYTE_GET8): Delete. Replace uses with BYTE_GET.
423 (byte_get_little_endian): Don't handle size of -8.
424 (byte_get_signed, byte_get_big_endian): Likewise.
425 (print_dec_vma, print_hex_vma): New functions.
426 (print_vma): Use them. Return chars output.
427 (get_dynamic_data): Return a bfd_vma array. Add ent_size parm.
428 (process_symbol_table): Handle alpha and s390 .hash.
430 2005-02-18 H.J. Lu <hongjiu.lu@intel.com>
432 * readelf.c (display_debug_loc): Print out offset for end of
435 2005-02-18 Joseph S. Myers <joseph@codesourcery.com>
437 * Makefile.am (TOOL_PROGS): Add objdump.
438 * Makefile.in: Regenerate.
440 2005-02-17 Alan Modra <amodra@bigpond.net.au>
442 * deflex.l (YY_NO_UNPUT): Define.
443 * rclex.l (YY_NO_UNPUT): Define.
444 * rcparse.y (null_unichar): New static var.
445 (res_null_text): Use it rather than attempting to init from wchar_t.
446 * windres.c: Include assert.h and time.h before getopt.h.
447 Include config.h and unistd.h too.
449 2005-02-15 Nick Clifton <nickc@redhat.com>
451 * nlmconv.c: Provide a full prototype for the localtime() function
452 in order to avoid a compile time warning.
454 2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
456 * readelf.c (group_count): Don't initialize it.
457 (process_section_groups): Reurn 1 if we won't do unwind nor
458 section groups. Set group_count to 0 before counting group
459 sections and return 1 if there are no group sections. Reread
460 SHT_SYMTAB/SHT_STRTAB sections only when needed. Don't skip
462 (process_object): Only set do_unwind to 0 if
463 process_section_groups return 0.
465 2005-02-10 Ian Lance Taylor <ian@airs.com>
467 * MAINTAINERS: Update my e-mail address.
469 2005-02-10 Mark Mitchell <mark@codesourcery.com>
471 * MAINTAINERS: Add Paul Brook and Mark Mitchell as ARM (Symbian)
474 2005-02-07 Inderpreet Singh <inderpreetb@noida.hcltech.com>
476 * MAINTAINERS: Add self as maintainer of MAXQ.
478 2005-01-31 Richard Sandiford <rsandifo@redhat.com>
480 * readelf.c (eh_addr_size): New variable.
481 (find_section): Move earlier in file. Return empty sections too.
482 (process_program_headers): Use find_section to find .dynamic.
483 (process_section_headers): Initialize eh_addr_size.
484 (dump_ia64_unwind, slurp_ia64_unwind_table, ia64_process_unwind)
485 (dump_hppa_unwind, slurp_hppa_unwind_table, hppa_process_unwind)
486 (display_debug_frames): Use it instead of local addr_size variable.
487 (size_of_encoded_value): Get pointer size from eh_addr_size rather
490 2005-01-31 Andrew Cagney <cagney@gnu.org>
492 * configure: Regenerate to track ../gettext.m4.
494 2005-01-31 Nick Clifton <nickc@redhat.com>
496 * version.c (print_version): Bump the copyright date to 2005.
498 2005-01-25 Alan Modra <amodra@bigpond.net.au>
500 * nm.c (display_rel_file): Read dynamic syms before calling
501 bfd_get_synthetic_symtab.
503 2005-01-21 Ben Elliston <bje@au.ibm.com>
505 * dlltool.c (dump_iat): Remove unused function.
506 (gen_exp_file): Remove #if 0'd code.
507 (make_one_lib_file): Likewise.
508 * srconv.c: Remove #if 0'd code throughout.
509 * size.c (lprint_number): Remove.
510 (print_berkeley_format): Remove #if 0'd code.
511 * ar.c (do_quick_append): Remove declaration and definiton.
512 (main): Remove #if 0'd code.
513 * filemode.c (filemodestring): Remove #if 0'd function.
514 * sysdump.c (unit_info_list): Remove function.
515 (object_body_list): Likewise.
516 (program_structure): Likewise.
517 (debug_list): Likewise.
518 (module): Remove #if 0'd code.
520 2005-01-20 Mark Mitchell <mark@codesourcery.com>
522 * BRANCHES: Add binutils-2_15-branch.
524 * MAINTAINERS: Document branch policy.
525 * BRANCHES: New file.
527 2005-01-19 Fred Fish <fnf@specifixinc.com>
529 * NEWS: Make note of the new MIPS disassembly option "no-aliases".
530 * doc/binutils.texi (objdump): Document the "no-aliases"
533 2005-01-17 Eugene Kotlyarov <ekot@narod.ru>
536 * rcparse.y (RCDATA): Allow a filename to be supplied as the
537 parameter. Parse it with define_rcdata_file().
538 * resrc.c (define_rcdata_file): New function.
539 * windres.h: Provide a prototype for the new function.
541 * resrc.c (define_user_file): Fix typo by replacing "font file"
544 2005-01-16 Jason Thorpe <thorpej@netbsd.org>
546 * MAINTAINERS: Update my email address.
548 2005-01-16 Danny Smith <dannysmith@users.sourceforge.net>
550 * dlltool.c (set_dll_name_from_def): New function. Strip name
551 to basename, with warning.
553 (def_library): Likwise.
554 (main): Strip arg of --dllname to basename, with warning.
555 Only use basename of exp_name when inferring dll_name.
557 2005-01-11 Nick Clifton <nickc@redhat.com>
560 * doc/binutils.texi (c++filt): Use uppercase CXXFILT in the
561 footnote in order to prevent the sed script in the Makefile from
562 converting it into c++filt.
564 2005-01-10 H.J. Lu <hongjiu.lu@intel.com>
567 readelf.c (saved_base_address): Removed.
568 (decode_64bit_range): Likewise.
569 (decode_range): Likewise.
570 (display_64bit_debug_ranges): Likewise.
571 (debug_info): Add range_lists, num_range_lists and
573 (read_and_display_attr_value): Handle do_debug_ranges.
574 (process_debug_info): Likewise.
575 (display_debug_ranges): Rewrite.
576 (process_object): Free range_lists.
578 2005-01-10 Andreas Schwab <schwab@suse.de>
580 * configure.in: Don't define SKIP_ZEROES.
581 * configure: Regenerate.
582 * objdump.c (disassemble_data): Set skip_zeroes and
583 skip_zeroes_at_end in disasm_info to defaults.
584 (DEFAULT_SKIP_ZEROES): Rename from SKIP_ZEROES and always define.
585 (DEFAULT_SKIP_ZEROES_AT_END): Rename from SKIP_ZEROES_AT_END and
587 (disassemble_bytes): Use skip_zeroes and skip_zeroes_at_end from
590 2005-01-05 H.J. Lu <hongjiu.lu@intel.com>
592 * readelf.c (display_debug_loc): Display base address
593 specifiers. Always output <End of list>.
595 2005-01-05 H.J. Lu <hongjiu.lu@intel.com>
597 * readelf.c (have_frame_base): New.
598 (need_base_address): Likewise.
599 (saved_base_address): Likewise.
600 (decode_location_expression): Return 1 if DW_AT_frame_base is
602 (debug_info): Add base_address and a have_frame_base pointer.
603 (read_and_display_attr_value): Replace saved_DW_AT_low_pc with
604 saved_base_address. Record base address. Set have_frame_base.
605 Record if a location list has DW_AT_frame_base. Display if a
606 location expression has no DW_AT_frame_base but needs one. Set
607 saved_base_address only if needed.
608 (process_debug_info): Clear have_frame_base, saved_base_address
609 and set need_base_address.
610 (display_debug_loc): Display if a location expression has no
611 DW_AT_frame_base but needs one. Display if start >= end. Don't
612 adjust for section address. Properly handle base address.
613 (process_object): Free the have_frame_base pointer in
616 2005-01-04 H.J. Lu <hongjiu.lu@intel.com>
618 * readelf.c (display_debug_loc): Display offsets for hole and
620 (display_debug_str): Add a newline at the end.
622 2005-01-04 Armin Diehl <diehl@nordrhein.de>
625 * nlmconv.c (main): Only store the basename of the output filename
628 2005-01-04 H.J. Lu <hongjiu.lu@intel.com>
631 * readelf.c (process_debug_info): New.
632 (debug_info): Add num_loc_offsets, loc_offsets and
634 (get_debug_info): Use process_debug_info.
635 (display_debug_loc): Properly handle location list. Warn if bad
636 location lists are encoutnered.
637 (read_and_process_attr_value): New.
638 (read_and_display_attr_value): Use "%lx" for DW_FORM_data4.
639 (display_debug_info): Use process_debug_info.
640 (process_object): Also free loc_offsets in debug_information.
642 2004-12-31 Alan Modra <amodra@bigpond.net.au>
644 * objdump.c (remove_useless_symbols): Discard section symbols.
646 2004-12-27 H.J. Lu <hongjiu.lu@intel.com>
648 * readelf.c (read_leb128): Support 64bit host.
650 2004-12-23 Nick Clifton <nickc@redhat.com>
653 * readelf.c (debug_info): Add 'cu_offset' field.
654 (get+pointer_size_of_comp_unit): Rename to
655 'get_pointer_size_and_offset_of_comp_unit'. Add code to return
656 the offset of the comp_unit if requested.
657 (get_debug_info): Record comp_unit offsets as well.
658 (display_debug_lines): Call get_pointer_size_of_comp_unit.
659 (decode_location_expression): Add an extra parameter - the offset
660 of the current comp-unit. Use this when decoding the DW_OP_call2
661 and DW_OP_call4 operators.
662 (display_debug_loc): Call get_pointer_size_of_comp_unit, pass the
663 comp_unit offset on the decode_location_expression.
664 (read_and_display_attr_value): Pass the comp_unit offset on the
665 decode_location_expression.
666 (display_debug_frames): Pass 0 as the comp_unit offset to
667 decode_location_expression.
669 2004-12-22 Nick Clifton <nickc@redhat.com>
671 * readelf.c (last_pointer_size, warned_about_missing_comp_units):
672 New variables associated with obtaining the pointer size for a
674 (get_pointer_size_of_comp_unit): Add an extra parameter - the name
675 of the section requesting the pointer size. Use this name in
676 error messages. If there are not enough comp_units available
677 produce a warning message, but return the last known pointer size
678 so that section dumping can continue.
679 (get_debug_info): Reset the new variables.
680 (display_debug_lines): Add extra parameter to invocation of
681 get_pointer_size_of_comp_unit and remove error message when it
683 (display_debug_loc): Likewise.
685 2004-12-15 Jan Beulich <jbeulich@novell.com>
687 * doc/binutils.texi: Document --strip-unneeded-symbol and
688 --strip-unneeded-symbols.
689 * objcopy.c (strip_unneeded_list): New.
690 (enum command_line_switch): Add OPTION_STRIP_UNNEEDED_SYMBOL
691 and OPTION_STRIP_UNNEEDED_SYMBOLS.
692 (copy_options): Add --strip-unneeded-symbol and
693 --strip-unneeded-symbols.
694 (copy_usage): Likewise.
695 (filter_symbols): Suppress copying of symbol if in strip_unneeded_list
696 and the symbol is not needed.
697 (copy_main): Handle OPTION_STRIP_UNNEEDED_SYMBOL and
698 OPTION_STRIP_UNNEEDED_SYMBOLS.
700 2004-12-09 Ian Lance Taylor <ian@wasabisystems.com>
702 * readelf.c (get_machine_flags): Handle E_MIPS_MACH_9000.
704 2004-12-08 Ben Elliston <bje@au.ibm.com>
706 * arlex.l: Fix formatting.
708 2004-12-08 Ben Elliston <bje@au.ibm.com>
710 * doc/Makefile.am (config.texi): Emit a @set UPDATED command to
711 config.texi whose value is the current month and year.
712 * doc/Makefile.in: Rebuild.
713 * doc/binutils.texi: Set the document subtitle to be the value of
714 the Texinfo UPDATED variable (obtained from config.texi).
716 2004-12-07 Ben Elliston <bje@au.ibm.com>
719 * doc/binutils.texi (def file format): New node.
720 (dlltool): Use the tool name as the @chapter name, like all the
721 other binutils. Use @file{.def} throughout for consistency.
723 2004-12-06 Ben Elliston <bje@au.ibm.com>
725 * dlltool.c: Comment fix.
727 2004-12-06 Ben Elliston <bje@au.ibm.com>
729 * doc/binutils.texi: Update copyright years.
731 2004-12-03 Richard Sandiford <rsandifo@redhat.com>
733 * MAINTAINERS: Remove mention of config.if.
735 2004-11-30 Tero Niemela <tero_niemela@yahoo.com>
737 * Makefile.am: Change LOCALEDIR to $(datadir)/share.
738 * Makefile.in: Regenerate.
740 2004-11-10 Ian Lance Taylor <ian@wasabisystems.com>
743 * stabs.c (stab_demangle_template): Call stab_demangle_count
744 rather than stab_demangle_get_count to get the length of a pointer
747 2004-11-10 Danny Smith <dannysmith@users.sourceforge.net>
749 * defparse.y: Remove unnecessary commas from token list.
751 2004-11-08 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
753 * doc/binutils.texi (nm): Update description of weak symbols.
755 2004-11-03 Nick Clifton <nickc@redhat.com>
757 * readelf.c (do_debug_ranges): New variable.
758 (usage): Document new switch: -wR or --debug-dump=Ranges.
759 (parse_args): Handle new switch. Replace switch statement for the
760 long options with a more compact table structure.
761 (process_section_headers): Allow the dumping of .debug_ranges
762 sections if so requested.
763 (debug_displays): Likewise.
764 (load_debug_range): New function: Grabs the contents of a
765 .debug_ranges section.
766 (free_debug_range): New function: Releases the grabbed
767 .debug_ranges section.
768 (decode_64bit_range): New function: Displays a 64-bit range in a
769 .debug_ranges section.
770 (decode_range): New function: Displays a 32-bit range in a
771 .debug_ranges section.
772 (read_and_display_attr_value): Record the value of DW_AT_low_pc
773 attributes. Use decode_ranges() to display a DW_AT_ranges
775 (display_debug_info): Use load_debug_range() and
777 (display_64bit_debug_ranges): New function. Displays the contents
778 of a 64-bit format .debug_ranges section.
779 (display_debug_ranges): New function: Displays the contents of a
780 32-bit .debug_ranges section.
782 (main): Move cmdline_dump_sects and num_cmdline_dump_sects into the
784 (process_object): Initialise the dump_sects array from the
785 cmdline_dump_sects array before processing each object file.
787 (streq, strneq): New macros. Use them to replace occurrences of
788 strcmp() and strncmp().
790 (debug_information): New structure array to replace
791 debug_line_pointer_sizes array.
792 (num_debug_info_entries): New variable to replace
793 num_debug_line_pointers.
794 (get_pointer_size_of_comp_unit): New function: Returns the pointer
795 size of a given compilation unit.
796 (get_debug_info): New function to replace
797 get_debug_line_pointer_sizes.
798 (display_debug_lines): Use the new functions.
799 (display_debug_loc): Likewise.
801 (disassemble_section): Change return type to int.
802 (display_debug_lines): Move local variables to their
804 (display_debug_section): Likewise. Also record the return value
805 of functions called and pass this back to the parent. Also only
806 warn about undumped sections when the user explicitly requested
809 (debug_apply_rela_addends): Allow relocations against STT_OBJECT
812 * NEWS: Mention the support for decoding .debug_ranges sections.
813 * doc/binutils.texi: Document the new command line switch to
816 2004-11-03 Randolph Chung <tausq@debian.org>
818 * readelf.c (ia64_unw_aux_info, ia64_unw_table_entry): Rename from
819 unw_aux_info and unw_table_entry.
820 (find_symbol_for_address): Pass symtab and strtab info explicitly.
821 (dump_ia64_unwind): Rename unw_{aux_info,table_entry} with ia64_
823 (slurp_ia64_unwind_table): Likewise.
824 (ia64_process_unwind): Rename from old process_unwind.
825 (hppa_unw_aux_info): New.
826 (dump_hppa_unwind): New.
827 (slurp_hppa_unwind_table): New.
828 (hppa_process_unwind): New.
829 (process_unwind): Factor out common unwinding checks; dispatch to
830 unwind handler based on machine type.
832 2004-11-02 Nick Clifton <nickc@redhat.com>
834 * readelf.c (display_debug_lines): Fix typo in error message.
836 2004-10-26 Mark Mitchell <mark@codesourcery.com>
838 * readelf.c (get_note_type): Handle notes not in core files.
839 (process_note_sections): New function.
840 (process_corefile_contents): Rename to ...
841 (process_notes): ... this.
842 (process_object): Call process_notes, not
843 process_corefile_contents.
844 * doc/binutils.texi: Update readelf -n documentation.
846 2004-10-26 Jakub Jelinek <jakub@redhat.com>
848 * ar.c (extract_file): Set atime to mtime for ar xo.
850 2004-10-25 Ian Lance Taylor <ian@wasabisystems.com>
852 * stabs.c (stab_demangle_v3_arglist): New static function, broken
853 out of stab_demangle_v3_argtypes.
854 (stab_demangle_v3_argtypes): Call it.
855 (stab_demangle_v3_arg): Handle DEMANGLE_COMPONENT_FUNCTION_TYPE.
856 If we find an unrecognized component, print out its number.
858 2004-10-25 David Mosberger <davidm@hpl.hp.com>
860 * readelf.c (slurp_ia64_unwind_table): Support relocations against
861 non-section symbols by adding in the symbol value.
863 2004-10-25 Nick Clifton <nickc@redhat.com>
866 * readelf.c (dynamic_strings_length): New global variable.
867 (VALID_DYNAMIC_NAME, GET_DYNAMIC_NAME): New macros for accessing
868 strings in the dynamic string table.
869 (process_section_headers): Initialise dynamic_strings_length.
870 (process_dynamic_section): Likewise.
871 (process_object): Reset dynamic_string_length when the buffer is freed.
872 (dynamic_sections_mips_val): Use the new macros.
873 (process_dynamic_section): Likewise.
874 (process_version_sections): Likewise.
875 (process_symbol_table): Likewise.
876 (process_syminfo): Likewise.
877 (process_mips_specific): Likewise.
878 (dump_relocations): Add a new parameter 'strtablen' and use this
879 to verify that string offset in a given reloc is valid. Print a
880 suitable error message otherwise.
881 (process_relocs): Pass the new argument to dump_relocations.
883 2004-10-23 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
885 * dlltool.c: Include <assert.h>.
886 (PREFIX_ALIAS_BASE): Define.
887 (struct export): Add member import_name;
888 (def_exports): Set import_name.
889 (make_one_lib_file): Remove prefix alias code, use import_name
891 (gen_lib_file): Create and delete aliases.
893 2004-10-19 H.J. Lu <hongjiu.lu@intel.com>
895 * readelf.c (process_section_groups): Free symtab after use.
897 2004-10-18 Tommy Pettersson <ptp@lysator.liu.se>
898 Nick Clifton <nickc@redhat.com>
900 * strings.c (usage): Place radix values for -t option into the
903 * objcopy.c (add_redefine_syms_file): Change error messages to use
904 <filename>:<linenumber>: format for easier parsing by automatic
907 * srconv.c (show_usage): Fix spelling typo.
909 * windres.c (format_from_filename): Suggest the use of -J instead
910 of -I if the file type cannot be determined.
912 2004-10-18 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
914 * strings.c: Include <sys/stat.h>.
916 2004-10-18 Alan Modra <amodra@bigpond.net.au>
918 * budemang.c (demangle): Fix thinko.
920 * budemang.c (demangle): Handle "@plt" suffix.
922 2004-10-14 Nick Clifton <nickc@redhat.com>
924 * nm.c (usage): Fix description of --special-syms switch.
926 2004-10-13 Jakub Jelinek <jakub@redhat.com>
928 * strings.c (statbuf): New typedef.
930 (strings_object_file): Avoid using get_file_size, instead do the
931 checks here, using file_stat.
932 * configure.in (HAVE_STAT64): New test.
933 * configure: Rebuilt.
934 * config.in: Rebuilt.
936 2004-10-12 Paul Brook <paul@codesourcery.com>
938 * readelf.c (decode_ARM_machine_flags): Support EABI version 4.
940 2004-10-11 Alan Modra <amodra@bigpond.net.au>
942 * objdump.c (dump_symbols): Fix thinko last change. Improve error
945 2004-10-08 Nick Clifton <nickc@redhat.com>
947 * nm.c: Add a new switch --special-syms which, if enabled, will
948 include the ARM Mapping symbols in nm's output.
949 (usage): Mention the switch.
950 (filter_symbols): Handle the switch.
951 * objdump.c: Add a similar switch.
952 (usage): Mention the switch.
953 (dump_symbols): Handle the switch.
954 * doc/binutils.texi: Document the new switches.
955 * NEWS: Mention the new switches.
957 2004-10-08 Daniel Jacobowitz <dan@debian.org>
959 * readelf.c (get_x86_64_section_type_name): New function.
960 (get_section_type_name): Use it.
962 2004-10-08 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
964 * dlltool.c (make_one_lib_file): Revert 2004-09-02 and 2004-09-04
966 * doc/binutils.texi (dlltool): Revert 2004-09-06 patch.
968 2004-10-07 Alexandre Oliva <aoliva@redhat.com>
970 * readelf.c (get_machine_flags): Don't fall through into m68k cpu
973 2004-10-01 Paul Brook <paul@codesourcery.com>
975 * readelf.c (get_arm_section_type_name): New function.
976 (get_section_type_name): Use it.
978 2004-09-28 Nick Clifton <nickc@redhat.com>
980 * nm.c: Reorder functions to eliminate most of the static function
983 2004-09-22 Alan Modra <amodra@bigpond.net.au>
985 * readelf.c (process_program_headers): Don't include .tbss in non-TLS
988 2004-09-17 Alan Modra <amodra@bigpond.net.au>
990 * Makefile.am: Run "make dep-am".
991 * Makefile.in: Regenerate.
992 * config.in: Regenerate.
993 * configure: Regenerate.
994 * doc/Makefile.in: Regenerate.
995 * po/binutils.pot: Regenerate.
997 2004-09-12 Alan Modra <amodra@bigpond.net.au>
999 * readelf.c (decode_location_expression): Sign extend value for
1000 DW_OP_const1s, DW_OP_const2s, DW_OP_const4s, DW_OP_bra, DW_OP_skip.
1002 2004-09-09 Nick Clifton <nickc@redhat.com>
1005 * ar.c (replace_members): Do not use get_file_size as
1006 ar_emul_append correctly handles missing files.
1008 2004-09-07 H.J. Lu <hongjiu.lu@intel.com>
1010 * configure: Regenerated with autconfig 2.13.
1012 2004-09-06 Danny Smith <dannysmith@users.sourceforge.net>
1014 * doc/binutils.texi (dlltool): Update --add-underscore, --kill-at
1017 2004-09-06 Michael Wardle <mbw@endbracket.net>
1019 * doc/binutils.texi (objdump): Document that the -x switch includes
1020 the effect of the -p switch.
1022 2004-09-04 Danny Smith <dannysmith@users.sourceforge.net>
1024 * dlltool.c (make_one_lib_file): Test if internal_name was
1025 specified by user before using it.
1027 2004-09-02 Carlo Wood <carlo@alinoe.com>
1030 * dlltool.c (make_one_lib_file): For IDATA6 take the name from
1031 exp->internal_name if it is present.
1033 2004-09-02 Alexandre Oliva <aoliva@redhat.com>
1035 * MAINTAINERS: Add self as co-maintainer of FR-V.
1036 * readelf.c (get_machine_flags): Print FR-V cpu types.
1038 2004-08-28 Alan Modra <amodra@bigpond.net.au>
1040 * nm.c (show_synthetic): New var.
1041 (long_options): Add "synthetic".
1043 (display_rel_file): Handle show_synthetic.
1045 2004-08-28 Alan Modra <amodra@bigpond.net.au>
1047 * objdump.c (dump_bfd): Pass both symbol tables to
1048 bfd_get_synthetic_symtab.
1050 2004-08-17 Jakub Jelinek <jakub@redhat.com>
1052 * objdump.c (dump_bfd): For relocatable objects, pass syms instead
1053 of dynsyms to bfd_get_synthetic_symtab.
1055 2004-08-16 Alan Modra <amodra@bigpond.net.au>
1057 * readelf.c (debug_apply_rela_addends): New function, extracted from..
1058 (display_debug_info): ..here.
1059 (display_debug_frames): Call debug_apply_rela_addends. Don't do
1060 DW_EH_PE_pcrel adjustment for ET_REL.
1062 2004-08-06 Andreas Schwab <schwab@suse.de>
1064 * readelf.c (dump_relocations): Fix typo when calculating
1067 2004-08-02 Jakub Bogusz <qboosh@pld-linux.org>
1069 * dllwrap.c (deduce_name): Fix typos introduced when program_name
1070 was renamed to prog_name.
1072 2004-07-29 Alexandre Oliva <aoliva@redhat.com>
1074 * readelf.c (get_machine_flags <EM_SH>): Handle EF_SH2A and
1077 2004-07-28 Alexandre Oliva <aoliva@redhat.com>
1079 2003-07-08 Alexandre Oliva <aoliva@redhat.com>
1080 * readelf.c (get_machine_flags <EM_SH)): Handle EF_SH4_NOFPU and
1082 2003-06-12 Alexandre Oliva <aoliva@redhat.com>
1083 * readelf.c (get_machine_flags <EM_SH>): Print SH ISA name.
1085 2004-07-21 H.J. Lu <hongjiu.lu@intel.com>
1087 * objcopy.c (filter_symbols): Use bfd_coff_get_comdat_section
1089 * objdump.c (dump_section_header): Likewise.
1091 2004-07-15 Aravinda PR <aravindapr@rediffmail.com>
1093 * nlmconv.c (main): Pass map_file argument to link_inputs.
1094 (link_inputs): Use map_file argument if it is defined.
1096 2004-07-13 Nick Clifton <nickc@redhat.com>
1098 * dllwrap.c: Replace 'program_name' with 'prog_name' to avoid
1099 conflicts with exported global defined in bucomm.h.
1100 (deduce_name): Rename parameter 'program_name' to 'name' to avoid
1101 shadowing the global defined in bucomm.h.
1103 2004-07-12 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1105 * dlltool.c (ext_prefix_alias): New global variable.
1106 (make_one_lib_file): Add aliases with prefixes for external
1107 and import definitions.
1108 (usage): Document -p option.
1109 (long_options): Add --ext-prefix-alias option.
1111 * doc/binutils.texi: Document new switch.
1112 * NEWS: Mention new switch.
1114 2004-07-09 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1116 * binutils/dlltool.c (asm_prefix): Add parameter: name.
1117 No underscore for symbols beginning with ?.
1118 (ASM_PREFIX): Add parameter: NAME.
1119 (gen_exp_file): Use new parameter.
1120 (make_label): Likewise.
1121 (make_imp_label): Likewise.
1122 (make_one_lib_file): Likewise.
1124 2004-07-07 Tomer Levi <Tomer.Levi@nsc.com>
1126 * MAINTAINERS: Added myself to the list.
1127 * readelf.c: Include "elf/crx.h".
1128 (guess_is_rela): Handle EM_CRX.
1129 (get_machine_name): Likewise.
1130 (dump_relocations): Likewise.
1132 2004-07-03 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1134 * doc/binutils.texi (nm): Clarify weak symbol description.
1136 2004-06-24 Ben Elliston <bje@au.ibm.com>
1138 * readelf.c (get_segment_type): Display "GNU_STACK", not just
1139 "STACK", when a PT_GNU_STACK segment is encountered.
1141 2004-06-24 Alan Modra <amodra@bigpond.net.au>
1143 * objcopy.c (copy_section): Don't set _cooked_size.
1145 2004-06-22 Alan Modra <amodra@bigpond.net.au>
1147 * readelf.c (Elf32_Word): Delete.
1148 (get_32bit_dynamic_section): Handle SGI ELF dynamic segment.
1149 (get_64bit_dynamic_section): Likewise.
1151 * readelf.c (get_32bit_dynamic_section): Stop at first DT_NULL entry.
1152 (get_64bit_dynamic_section): Likewise.
1154 * readelf.c (dynamic_nent): New variable.
1155 (get_32bit_dynamic_section): Set it.
1156 (get_64bit_dynamic_section): Here too.
1157 (process_dynamic_section): Use it instead of dynamic_size.
1158 (process_syminfo): Likewise.
1160 * readelf.c (get_32bit_dynamic_section): Correct number of entries
1161 translated from external to internal form.
1162 (get_64bit_dynamic_section): Likewise.
1164 2004-06-18 Jie Zhang <zhangjie@magima.com.cn>
1166 * readelf.c (process_program_headers): When locating the dynamic
1167 section use the section table if it is present.
1168 (dynamic_segment): Renamed to dynamic_section.
1169 Replace references to dynamic segment with references to dynamic
1170 section, except where appropriate.
1171 (dynamic_segment_mips_val): Rename to dynamic_section_mips_val.
1172 (dynamic_segment_parisc_val): Rename to dynamic_section_parisc_val.
1173 (dynamic_segment_ia64_val): Rename to dynamic_section_ia64_val.
1174 (get_32bit_dynamic_segment): Rename to get_32bit_dynamic_section.
1175 Remove tag counting code as it is no longer needed.
1176 (get_64bit_dynamic_segment): Rename to get_64bit_dynamic_section.
1177 Remove tag counting code as it is no longer needed.
1178 (process_dynamic_segment): Rename to process_dynamic_section.
1180 2004-06-15 Alan Modra <amodra@bigpond.net.au>
1182 * objcopy.c (copy_section): Use bfd_get_section_size instead of
1183 _raw_size or bfd_get_section_size_before_reloc. Don't set reloc_done.
1184 (compare_section_lma): Likewise.
1185 * addr2line.c (find_address_in_section): Likewise.
1186 * coffgrok.c (do_sections_p1): Likewise.
1187 * dlltool.c (scan_drectve_symbols): Likewise.
1188 * nlmconv.c (main): Likewise.
1189 (copy_sections): Likewise.
1190 (powerpc_mangle_relocs): Likewise.
1191 * objdump.c (disassemble_section): Likewise.
1192 * prdbg.c (find_address_in_section): Likewise.
1193 * size.c (berkeley_sum): Likewise.
1194 * srconv.c (wr_ob): Likewise.
1195 * strings.c (strings_a_section): Likewise.
1197 2004-05-28 Ian Lance Taylor <ian@wasabisystems.com>
1199 * readelf.c (decode_ARM_machine_flags): Add EF_ARM_VFP_FLOAT.
1201 2004-05-17 David Heine <dlheine@tensilica.com>
1203 * objcopy.c (setup_bfd_headers): New function.
1204 (copy_object): Call setup_bfd_headers.
1206 2004-05-13 Paul Brook <paul@codesourcery.com>
1208 * readelf.c (display_debug_frames): Handle dwarf3 format CIE
1211 2004-05-13 Nick Clifton <nickc@redhat.com>
1213 * po/fr.po: Updated French translation.
1215 2004-05-11 Jakub Jelinek <jakub@redhat.com>
1217 * readelf.c (get_segment_type): Handle PT_GNU_RELRO.
1219 2004-05-07 H.J. Lu <hongjiu.lu@intel.com>
1221 * readelf.c (section_groups): New.
1223 (section_headers_groups): New.
1224 (process_section_groups): Populate group_count, section_groups
1225 and section_headers_groups.
1226 (process_unwind): Support section group.
1227 (process_object): Always call process_section_groups. Free
1228 section_groups and section_headers_groups.
1230 2004-04-30 H.J. Lu <hongjiu.lu@intel.com>
1232 * readelf.c (process_section_headers): Use %3lu on sh_info.
1234 2004-04-30 Michael Deutschmann <michael@talamasca.ocis.net>
1236 * ranlib.sh: Quote $1 argument in case it contains spaces.
1238 2004-04-27 John Paul Wallington <jpw@gnu.org>
1240 * objcopy.c (copy_usage, strip_usage): Fix spelling.
1242 2004-04-26 H.J. Lu <hongjiu.lu@intel.com>
1244 * readelf.c (do_section_groups): New.
1245 (options): Add --section-groups/-g.
1246 (usage): Mention --section-groups/-g.
1247 (parse_args): Support --section-groups/-g.
1248 (get_group_flags): New.
1249 (process_section_groups): New.
1250 (process_object): Call process_section_groups.
1252 2004-04-24 Alan Modra <amodra@bigpond.net.au>
1254 * objdump.c (disassemble_section): Don't disassemble sections
1255 without SEC_HAS_CONTENTS.
1257 2004-04-22 Jakub Jelinek <jakub@redhat.com>
1259 * objdump.c (synthsyms, synthcount): New variables.
1260 (disassemble_data): Use dynsyms for stripped binaries or libraries.
1261 Add synthetized symbols.
1262 (dump_bfd): For disassemble, initialize dynsyms always and
1263 also synthsyms. Free synthsyms and clear {sym,dynsym,synth}count
1266 2004-04-14 Alan Modra <amodra@bigpond.net.au>
1268 * strings.c (print_strings): Cast file_off to unsigned long in
1271 2004-04-07 Benjamin Monate <benjamin.monate@cea.fr>
1274 * arsup.c (ar_save): Use smart_rename.
1276 2004-04-01 Dean Luick <luick@cray.com>
1278 * readelf.c (display_debug_pubnames): Align offset and data
1280 (read_and_display_attr_value): Add missing break;
1281 (debug_displays): Enable the display of the .debug_pubtypes
1284 2004-03-30 Stan Shebs <shebs@apple.com>
1286 * mpw-config.in, mpw-make.sed, mac-binutils.r: Remove MPW
1287 support files, no longer used.
1289 2004-03-23 Paul Brook <paul@codesourcery.com>
1291 * readelf.c (decode_ARM_machine_flags): Add EABI v3.
1293 2004-03-21 Richard Henderson <rth@redhat.com>
1295 * readelf.c (display_debug_frames): Don't crash for mismatched
1296 DW_CFA_restore_state.
1298 2004-03-19 Alan Modra <amodra@bigpond.net.au>
1300 * Makefile.am: Run "make dep-am".
1301 * Makefile.in: Regenerate.
1302 * aclocal.m4: Regenerate.
1303 * config.in: Regenerate.
1304 * configure: Regenerate.
1305 * po/binutils.pot: Regenerate.
1307 2004-03-15 Nathan Sidwell <nathan@codesourcery.com>
1309 * objdump.c (struct SFILE): Replace current pointer with pos
1310 offset, rename size to alloc.
1311 (objdump_sprintf): Avoid unnecessary copies in the common case
1312 (disassemble_bytes): Keep sfile live throughout the
1313 function. Adjust usage appropriately.
1315 2004-03-10 Ben Elliston <bje@gnu.org>
1317 * MAINTAINERS: Update my mail address.
1319 2004-03-08 Danny Smith <dannysmith@users.sourceforge.net>
1321 * deflex.l: Handle "PRIVATE" string.
1322 * defparse.y (%token): Add PRIVATE.
1323 (%type): Add opt_PRIVATE.
1324 (expline): Pass opt_PRIVATE to def_exports.
1325 (opt_PRIVATE): Handle PRIVATE token.
1326 * dlltool.h (def_exports): Add 7th param for private flag to
1328 * dlltool.c: Add PRIVATE to comment on EXPORTS syntax.
1329 (struct export): Add 'private' field.
1330 (def_exports): Set 'private' field of struct exports.
1331 (scan_drectve_symbols): Adjust calls to def_exports.
1332 (scan_filtered_symbols): Likewise.
1333 (dump_def_info): Print 'private' field.
1334 (gen_def_file): Likewise.
1335 (gen_lib_file): Skip generation of lib object if private.
1336 Delete tmp object files in same order as they were generated.
1337 Don't delete non-existent private object files.
1339 2004-02-27 Andreas Schwab <schwab@suse.de>
1341 * ar.c (main): Support POSIX-compatible argument parsing.
1343 2004-02-23 Daniel Lucq <daniel@lucq.org>
1345 * readelf.c (process_mips_specific): Print conflictsno as an
1348 2004-02-21 Dmitry Timoshkov <dmitry@baikal.ru>
1350 * dlltool.c (gen_exp_file): Always output names for forwarded symbols.
1352 2004-02-19 Jakub Jelinek <jakub@redhat.com>
1354 * objcopy.c (copy_section): Avoid warnings.
1356 2004-02-14 Andrew Cagney <cagney@redhat.com>
1358 * ar.c (remove_output): Use bfd_cache_close.
1359 * arsup.c (ar_end): Ditto.
1361 2004-01-21 Roland McGrath <roland@redhat.com>
1363 * readelf.c (get_note_type): Match NT_AUXV.
1365 2004-01-20 Nick Clifton <nickc@redhat.com>
1367 * version.c (print_version): Update copyright year to 2004.
1369 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1371 * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
1373 * aclocal.m4: Regenerate.
1374 * configure: Regenerate.
1376 2004-01-12 Jakub Jelinek <jakub@redhat.com>
1378 * objcopy.c: Include elf-bfd.h.
1379 (is_strip_section): Don't strip debugging sections if
1381 (setup_section): If STRIP_NONDEBUG make SEC_ALLOC sections
1382 ~(SEC_LOAD | SEC_HAS_CONTENTS) and on ELF targets also SHT_NOBITS.
1384 * objcopy.c (copy_section): Free relpp if relcount == 0.
1386 2004-01-12 Ian Lance Taylor <ian@wasabisystems.com>
1388 * stabs.c (parse_stab_argtypes): Handle g++ ABI version 3 names.
1389 (stab_demangle_argtypes): Likewise.
1390 (stab_demangle_v3_argtypes): New static function.
1391 (stab_demangle_v3_arg): New static function.
1393 2004-01-12 Nick Clifton <nickc@redhat.com>
1395 * objcopy.c (copy_object): Make the function boolean, returning
1397 (copy_archive): Handle the return value from copy_object.
1398 (copy_file): Likewise.
1400 2004-01-07 Nick Clifton <nickc@redhat.com>
1402 * readelf.c (find_section): New function. Locates a named
1404 (get_debug_line_pointer_sizes): New function: Initialises the
1405 debug_line_pointer_sizes array.
1406 (display_debug_lines): Call get_debug_line_pointer_sizes.
1407 (display_debug_loc): Likewise.
1408 (load_debug_loc): Use find_section.
1409 (load_debug_str): Likewise.
1410 (display_debug_info): Likewise.
1411 (prescan_debug_info): Delete.
1412 (debug_displays): Remove prescan field.
1413 (process_section_contents): Do not perform prescans.
1415 2004-01-03 Alan Modra <amodra@bigpond.net.au>
1417 * objcopy.c (filter_bytes): Delete. Move code to..
1418 (copy_section): ..here. Simplify size adjustment. Divide
1419 section lma by interleave.
1421 2004-01-02 Nick Clifton <nickc@redhat.com>
1423 * po/ru.po: New file: Russian translation.
1424 * configure.in (ALL_LINGUAS): Add ru
1425 * configure: Regenerate.
1427 For older changes see ChangeLog-0203
1433 version-control: never