1 2005-05-19 Zack Weinberg <zack@codesourcery.com>
3 * Makefile.am: Have 'all' depend on 'info'.
4 * Makefile.in: Regenerate.
6 2005-05-19 Ben Elliston <bje@au.ibm.com>
8 * readelf.c (read_and_display_attr_value): Handle a DW_AT_encoding
9 value of DW_ATE_GNU_decimal_float.
11 2005-05-17 Daniel Jacobowitz <dan@codesourcery.com>
13 * doc/Makefile.am (config.texi): Don't use $<.
14 * doc/Makefile.in: Regenerated.
16 2005-05-15 Yitzchak Scott-Thoennes <sthoenna@efn.org>
18 * deflex.l: Ignore CRs
20 2005-05-15 Daniel Jacobowitz <dan@codesourcery.com>
22 * acinclude.m4: Remove obsolete code.
23 * configure.in: Update AC_PREREQ.
24 * doc/Makefile.am (binutils_TEXINFOS): Define.
25 (config.texi): Depend on distributed files instead of built
27 (binutils.dvi, binutils.info): Remove unnecessary rules.
28 (DISTCLEANFILES): Remove.
29 (install-data-local): Renamed from install.
30 (info-local): Renamed from info.
31 * Makefile.in, aclocal.m4, config.in, configure,
32 doc/Makefile.in: Regenerated.
34 2005-05-14 Alan Modra <amodra@bigpond.net.au>
36 * readelf.c (get_ppc_dynamic_type): Display DT_PPC_GOT, not
39 2005-05-13 Fred Fish <fnf@specifixinc.com>
41 * readelf.c: Fix a couple of obvious comment typos,
42 'debug_str' -> 'debug_ranges' and proecess' -> 'process'.
44 2005-05-13 H.J. Lu <hongjiu.lu@intel.com>
46 * readelf.c (dump_ia64_unwind): Get stamp with proper size.
48 2005-05-12 Nick Clifton <nickc@redhat.com>
50 * readelf.c (display_debug_lines): If pointer_size has not been
51 found then assume that it is 4 in order to prevent a seg fault
52 when process_extend_line_op attempts to read the line data.
54 2005-05-11 Alan Modra <amodra@bigpond.net.au>
56 * readelf.c (get_ppc_dynamic_type): New function for DT_PPC_GLINK.
57 (get_dynamic_type): Call the above.
59 2005-05-07 Nick Clifton <nickc@redhat.com>
61 * Update the address and phone number of the FSF organization in
62 the GPL notices in the following files:
63 aclocal.m4, addr2line.c, ar.c, arlex.l, arparse.y, arsup.c,
64 arsup.h, binemul.c, binemul.h, bucomm.c, bucomm.h, budbg.h,
65 budemang.c, budemang.h, coffdump.c, coffgrok.c, coffgrok.h,
66 cxxfilt.c, debug.c, debug.h, deflex.l, defparse.y, dlltool.c,
67 dlltool.h, dllwrap.c, emul_aix.c, emul_vanilla.c, filemode.c,
68 ieee.c, nlmconv.c, nlmconv.h, nlmheader.y, nm.c, objcopy.c,
69 objdump.c, prdbg.c, rclex.l, rcparse.y, rdcoff.c, rddbg.c,
70 readelf.c, rename.c, resbin.c, rescoff.c, resrc.c, resres.c,
71 size.c, srconv.c, stabs.c, strings.c, sysdump.c, sysinfo.y,
72 syslex.l, unwind-ia64.c, unwind-ia64.h, version.c, windres.c,
73 windres.h, winduni.c, winduni.h wrstabs.c, doc/fdl.texi
75 2005-05-06 Jan Beulich <jbeulich@novell.com>
77 * objcopy.c (copy_file): Don't delete output upon error here.
78 (copy_main): Delete output upon error.
80 2005-05-02 Ben Elliston <bje@au.ibm.com>
82 * dlltool.c (dtab): Remove empty function.
83 (process_duplicates): Remove calls to dtab().
85 2005-05-01 Maciej W. Rozycki <macro@linux-mips.org>
87 * doc/binutils.texi (strip, objcopy): Clarify the description of
88 the "--strip-debug" option. Fix a typo.
90 2005-04-29 H.J. Lu <hongjiu.lu@intel.com>
92 * bucomm.c: Undo the last change.
95 2005-04-29 Ben Elliston <bje@au.ibm.com>
97 * syslex.l (word, number, unit): Remove unused variables.
98 * nlmheader.y (keyword_tokens): Make static.
99 * coffdump.c (dump_coff_symbol, coff_dump): Make static.
100 * coffgrok.c (lofile, last_function_symbol, last_function_type,
101 last_struct, last_enum, cur_sfile): Make variables static.
102 * sysdump.c (getCHARS, fillup, getBARRAY, getINT, getBITS,
103 sysroff_swap_tr_in, sysroff_print_tr_out): Make static.
104 * sysinfo.y (writecode, it, code, repeat, oldrepeat, name, rdepth,
105 names, pnames): Likewise.
107 2005-04-29 Ben Elliston <bje@au.ibm.com>
109 * ar.c (mri_mode): Make static.
110 * arsup.c (obfd, real_name, outfile): Likewise.
111 * binemul.c (ar_emul_create): Remove unused function.
112 (ar_emul_default_create): Likewise.
113 * binemul.h (ar_emul_create): Remove declaration.
114 (ar_emul_default_create): Likewise.
115 (struct bin_emulation_xfer_struct): Remove ar_create member.
116 * bucomm.c (report): Make static.
117 * bucomm.h (report): Remove declaration.
118 * cxxfilt.c (mbuffer): Make static.
119 (main): Use unsigned ints for some loop control variables.
120 * readelf.c: Make many global variables static.
121 * size.c (berkeley_format): Make static.
122 (long_options): Likewise.
123 * emul_aix.c (bin_aix_emulation): Remove ar_emul_default_create
124 structure initialiser.
125 (bin_aix5_emulation): Likewise.
126 * emul_vanilla.c (bin_vanilla_emulation): Likewise.
128 2005-04-27 Ben Elliston <bje@au.ibm.com>
130 * syslex.l: Adjust top-of-file comment: this file is part of GNU
131 binutils, not GNU ld.
133 2005-04-25 Nick Clifton <nickc@redhat.com>
136 * objcopy.c (copy_archive): Initialise 'obfd' field of new
139 * objcopy.c (copy_usage): Fix description of -K switch.
141 * doc/binutils.texi (strip, objcopy): Fix description of -K
144 2005-04-20 Daniel Jacobowitz <dan@codesourcery.com>
146 * readelf.c (display_debug_frames): Use data factor for
147 DW_CFA_def_cfa_sf and DW_CFA_def_cfa_offset_sf.
149 2005-04-19 H.J. Lu <hongjiu.lu@intel.com>
151 * objdump.c (dump_section_header): Skip linker created section.
153 2005-04-17 H.J. Lu <hongjiu.lu@intel.com>
155 * objdump.c (dump_section_header): Support SEC_GROUP.
157 2005-04-16 Nick Clifton <nickc@redhat.com>
159 * readelf.c (debug_apply_rela_addends): Remove redundant %s from
162 2005-04-15 Nick Clifton <nickc@redhat.com>
164 * objcopy.c (copy_file): Issue an error message when attmepting to
165 copy an empty input file.
167 2005-04-14 Alan Modra <amodra@bigpond.net.au>
169 * Makefile.am (NO_WERROR): Define. Use instead of -Wno-error.
170 * configure.in: Include ../bfd/warning.m4 contents.
171 * Makefile.in: Regenerate.
172 * configure: Regenerate.
173 * doc/Makefile.in: Regenerate.
175 2005-04-12 Alan Modra <amodra@bigpond.net.au>
177 * Makefile.am: Run "make dep-am".
178 (syslex.o, sysinfo.o, arparse.o, arlex.o): Add -Wno-error to command.
179 (sysroff.o, defparse.o, deflex.o): Likewise.
180 (nlmheader.o, rcparse.o, rclex.o): Likewise.
181 * Makefile.in: Regenerate.
182 * aclocal.m4: Regenerate.
183 * config.in: Regenerate.
184 * configure: Regenerate.
186 2005-04-11 Jan Beulich <jbeulich@novell.com>
188 * MAINTAINERS: Add myself as ix86 Intel mode maintainer.
190 2005-04-06 Nick Clifton <nickc@redhat.com>
191 H.J. Lu <hongjiu.lu@intel.com>
193 * po/rw.po: New translation: Kinyarwanda.
194 * configure.in (ALL_LINGUAS): Add rw.
195 * configure: Regenerate.
197 2005-04-04 Maciej W. Rozycki <macro@linux-mips.org>
199 * readelf.c (debug_apply_rela_addends): Reorder r_info as
200 necessary for 64-bit MIPS.
202 2005-04-04 Maciej W. Rozycki <macro@linux-mips.org>
204 * doc/binutils.texi (readelf): Remove a duplicate paragraph.
206 2005-04-04 Ramana Radhakrishnan <ramana.radhakrishnan@codito.com>
209 * objdump.c (dump_symbols): Add a check to see if the section for
210 the symbol is chosen using process_section_p.
212 2005-04-01 H.J. Lu <hongjiu.lu@intel.com>
214 * NEWS: Mention new readelf options, "-N/--full-section-name"
215 and "-g/--section-groups".
217 * doc/binutils.texi: Document new readelf options,
218 "-N/--full-section-name" and "-g/--section-groups".
220 2005-03-31 H.J. Lu <hongjiu.lu@intel.com>
222 * readelf.c (do_full_section_name): New.
223 (options): Add "--full-section-name"/'N'.
224 (usage): Add -N/--full-section-name.
225 (parse_args): Handle 'N'.
226 (process_section_headers): Print out the full section name if
227 do_full_section_name isn't 0.
229 2005-03-31 Nick Clifton <nickc@redhat.com>
231 * configure.in: Add a check for <unistd.h> providing a prototype
232 for getopt() which is compatible with the one in
233 include/getopt.h. If so then define HAVE_DECL_GETOPT.
234 * configure: Regenerate.
235 * config.in (HAVE_DECL_GETOPT): Add.
236 * aclocal.m4: Regenerate.
237 * addr2line.c: Include "config.h" before "bfd.h" so that
238 HAVE_DECL_GETOPT is defined before getopt.h is included.
240 2005-03-21 Jan-Benedict Glaw <jbglaw@lug-owl.de>
242 * doc/binutils.texi: Document new VAX disassembler-specific option
244 * NEWS: Mention the new option.
246 2005-03-29 Anil Paranjpe <anilp1@kpitcummins.com>
248 * MAINTAINERS: Add myself as H8300 maintainer.
250 2005-03-28 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
252 * objdump.c (disassemble_bytes): Remove cast.
254 2005-03-25 Daniel Jacobowitz <dan@codesourcery.com>
256 * BRANCHES: Add binutils-csl-arm-2005q1-branch and
257 binutils-2_16-branch.
259 2005-03-25 Mark Kettenis <kettenis@gnu.org>
261 * MAINTAINERS: Add myself as M88k maintainer.
263 2005-03-24 Danny Smith <dannysmith@users.sourceforge.net>
265 * winduni.c (unicode_from_ascii): Don't declare variables
266 's' and 'w' if _WIN32. Use MultiByteToWideChar to set the unicode
269 2005-03-24 Dmitry Diky <diwil@spec.ru>
271 * MAINTAINERS: Add myself as MSP430 maintainer.
273 2005-03-23 Nick Clifton <nickc@redhat.com>
275 * po/fr.po: Updated translation.
277 2005-03-22 Nick Clifton <nickc@redhat.com>
279 * MAINTAINERS: Add Daniel Jacobwitz to the blanket write
282 2005-03-17 Paul Brook <paul@codesourcery.com>
283 Dan Jacobowitz <dan@codesourcery.com>
284 Mark Mitchell <mark@codesourcery.com>
286 * binutils/readelf.c (get_arm_segment_type): New function.
287 (get_segment_type): Use it.
289 2005-03-18 Paul Brook <paul@codesourcery.com>
291 * objdump.c (objdump_print_addr): Avoid uninitialized warning.
293 2005-03-17 Diego Novillo <dnovillo@redhat.com>
295 * MAINTAINERS: Remove self as maintainer of x86 intel
298 2005-03-16 Nick Clifton <nickc@redhat.com>
299 Ben Elliston <bje@au.ibm.com>
301 * configure.in (werror): New switch: Add -Werror to the
302 compiler command line. Enabled by default. Disable via
304 * configure: Regenerate.
306 2005-03-15 Daniel Marques <marques@cs.cornell.edu>
307 Nick Clifton <nickc@redhat.com>
309 * objcopy.c (globalize_specific_list): New linked list of symbols
310 to convert from local binding into global binding.
311 (command_line_switch): Add OPTION_GLOBALIZE_SYMBOL and
312 OPTION_GLOBALIZE_SYMBOLS.
313 (copy_options): Add "globalize-symbol" and "globalize-symbols".
314 (copy_usage): Document the new switches.
315 (filter_symbols): Convert defined local symbols mentioned on the
316 globalize_specific_list into global symbols.
317 (copy_object): Perform actions if the globalize_specific_list is
319 (copy_main): Handle new switches.
320 * NEWS: Mention new feature.
321 * doc/binutils.texi: Document new switches.
323 2005-03-15 Alan Modra <amodra@bigpond.net.au>
325 * po/es.po: Commit new Spanish translation.
327 * po/fr.po: Commit new French translation.
329 2005-03-14 Alan Modra <amodra@bigpond.net.au>
331 * po/tr.po: Commit new Turkish translation.
333 2005-03-11 Nick Clifton <nickc@redhat.com>
335 * po/fr.po: Updated French translation.
337 2005-03-10 Nick Clifton <nickc@redhat.com>
339 * configure.in (ALL_LINGUAS): Add Romanian lingua "ro".
340 * configure: Regenerate.
341 * po/ro.po: New file.
343 * po/ru.po: Updated file.
345 2005-03-05 Alan Modra <amodra@bigpond.net.au>
347 * po/binutils.pot: Regenerate.
349 2005-03-02 Jan Beulich <jbeulich@novell.com>
351 * ar.c (remove_output): Use unlink_if_ordinary instead of unlink.
352 * objcopy.c (copy_file): Likewise.
353 (strip_main): Likewise.
355 2005-03-01 Stig Petter Olsroed <stigpo@users.sourceforge.net>
356 Nick Clifton <nickc@redhat.com>
358 * objdump.c: Fix coding for DISASSEMBLER_NEEDS_RELOC:
359 (struct objdump_disasm_info): Add 'reloc' field.
360 (disassemble_bytes): Fix check for when an insn has a reloc
361 associated with it. Improve comment explaining why the use of
362 octets is wrong. Set the 'reloc' field in objdump_disasm_info
364 (objdump_print_addr): Use new 'reloc' field to lookup the correct
365 address for the symbol associated with the current instruction's
367 (disassemble_info): Initialise 'reloc' field.
369 2005-02-28 Jakub Jelinek <jakub@redhat.com>
371 * readelf.c (get_file_type, get_machine_name, get_osabi_name,
372 get_segment_type, get_section_type_name, get_elf_class,
373 get_data_encoding, get_group_flags, dynamic_section_mips_val,
374 get_symbol_binding, get_symbol_type, get_TAG_name, get_FORM_name,
375 get_AT_name, process_mips_specific, process_gnu_liblist,
376 get_note_type, get_netbsd_elfcore_note_type): Use snprintf instead of
377 sprintf where needed.
378 (get_dynamic_type): Likewise. Increase buff to 64 bytes.
379 (get_elf_section_flags): Increase buff to 33 bytes. Avoid
381 (get_dynamic_flags): Renamed to...
382 (print_dynamic_flags): ... this. Print the flags to stdout instead
383 of returning them as string.
384 (process_dynamic_section): Adjust caller.
386 2005-02-25 H.J. Lu <hongjiu.lu@intel.com>
388 * readelf.c (display_debug_ranges): Print out offset for end of
391 2005-02-23 Alan Modra <amodra@bigpond.net.au>
393 * dlltool.c: Warning fixes.
394 * objdump.c: Likewise.
396 2005-02-22 Alan Modra <amodra@bigpond.net.au>
398 * Makefile.am (syslex.o, sysinfo.o): Pass AM_CFLAGS to compiler.
399 (syslex.o, sysinfo.o, dlltool.o, rescoff.o): Remove duplicate
400 dependencies. Run "make dep-am".
401 * nlmconv.c: Warning fixes.
402 * readelf.c: Likewise.
403 * srconv.c: Likewise.
404 * sysdump.c: Likewise.
405 * sysinfo.y: Likewise.
406 * syslex.l: Likewise. Use yyleng instead of strlen, memcpy instead
408 * Makefile.in: Regenerate.
410 2005-02-21 H.J. Lu <hongjiu.lu@intel.com>
412 * objcopy.c (parse_flags): Replace SEC_SHARED with
415 * objdump.c (dump_section_header): Dump SEC_TIC54X_BLOCK and
416 SEC_TIC54X_CLINK for TI c54x only. Remove SEC_ARCH_BIT_0. Dump
417 SEC_COFF_SHARED for COFF only.
419 2005-02-21 Alan Modra <amodra@bigpond.net.au>
421 * Makefile.am: Run "make dep-am"
422 * Makefile.in: Regenerate.
423 * doc/Makefile.in: Regenerate.
425 2005-02-21 Alan Modra <amodra@bigpond.net.au>
427 * readelf.c (BYTE_GET8): Delete. Replace uses with BYTE_GET.
428 (byte_get_little_endian): Don't handle size of -8.
429 (byte_get_signed, byte_get_big_endian): Likewise.
430 (print_dec_vma, print_hex_vma): New functions.
431 (print_vma): Use them. Return chars output.
432 (get_dynamic_data): Return a bfd_vma array. Add ent_size parm.
433 (process_symbol_table): Handle alpha and s390 .hash.
435 2005-02-18 H.J. Lu <hongjiu.lu@intel.com>
437 * readelf.c (display_debug_loc): Print out offset for end of
440 2005-02-18 Joseph S. Myers <joseph@codesourcery.com>
442 * Makefile.am (TOOL_PROGS): Add objdump.
443 * Makefile.in: Regenerate.
445 2005-02-17 Alan Modra <amodra@bigpond.net.au>
447 * deflex.l (YY_NO_UNPUT): Define.
448 * rclex.l (YY_NO_UNPUT): Define.
449 * rcparse.y (null_unichar): New static var.
450 (res_null_text): Use it rather than attempting to init from wchar_t.
451 * windres.c: Include assert.h and time.h before getopt.h.
452 Include config.h and unistd.h too.
454 2005-02-15 Nick Clifton <nickc@redhat.com>
456 * nlmconv.c: Provide a full prototype for the localtime() function
457 in order to avoid a compile time warning.
459 2005-02-11 H.J. Lu <hongjiu.lu@intel.com>
461 * readelf.c (group_count): Don't initialize it.
462 (process_section_groups): Reurn 1 if we won't do unwind nor
463 section groups. Set group_count to 0 before counting group
464 sections and return 1 if there are no group sections. Reread
465 SHT_SYMTAB/SHT_STRTAB sections only when needed. Don't skip
467 (process_object): Only set do_unwind to 0 if
468 process_section_groups return 0.
470 2005-02-10 Ian Lance Taylor <ian@airs.com>
472 * MAINTAINERS: Update my e-mail address.
474 2005-02-10 Mark Mitchell <mark@codesourcery.com>
476 * MAINTAINERS: Add Paul Brook and Mark Mitchell as ARM (Symbian)
479 2005-02-07 Inderpreet Singh <inderpreetb@noida.hcltech.com>
481 * MAINTAINERS: Add self as maintainer of MAXQ.
483 2005-01-31 Richard Sandiford <rsandifo@redhat.com>
485 * readelf.c (eh_addr_size): New variable.
486 (find_section): Move earlier in file. Return empty sections too.
487 (process_program_headers): Use find_section to find .dynamic.
488 (process_section_headers): Initialize eh_addr_size.
489 (dump_ia64_unwind, slurp_ia64_unwind_table, ia64_process_unwind)
490 (dump_hppa_unwind, slurp_hppa_unwind_table, hppa_process_unwind)
491 (display_debug_frames): Use it instead of local addr_size variable.
492 (size_of_encoded_value): Get pointer size from eh_addr_size rather
495 2005-01-31 Andrew Cagney <cagney@gnu.org>
497 * configure: Regenerate to track ../gettext.m4.
499 2005-01-31 Nick Clifton <nickc@redhat.com>
501 * version.c (print_version): Bump the copyright date to 2005.
503 2005-01-25 Alan Modra <amodra@bigpond.net.au>
505 * nm.c (display_rel_file): Read dynamic syms before calling
506 bfd_get_synthetic_symtab.
508 2005-01-21 Ben Elliston <bje@au.ibm.com>
510 * dlltool.c (dump_iat): Remove unused function.
511 (gen_exp_file): Remove #if 0'd code.
512 (make_one_lib_file): Likewise.
513 * srconv.c: Remove #if 0'd code throughout.
514 * size.c (lprint_number): Remove.
515 (print_berkeley_format): Remove #if 0'd code.
516 * ar.c (do_quick_append): Remove declaration and definiton.
517 (main): Remove #if 0'd code.
518 * filemode.c (filemodestring): Remove #if 0'd function.
519 * sysdump.c (unit_info_list): Remove function.
520 (object_body_list): Likewise.
521 (program_structure): Likewise.
522 (debug_list): Likewise.
523 (module): Remove #if 0'd code.
525 2005-01-20 Mark Mitchell <mark@codesourcery.com>
527 * BRANCHES: Add binutils-2_15-branch.
529 * MAINTAINERS: Document branch policy.
530 * BRANCHES: New file.
532 2005-01-19 Fred Fish <fnf@specifixinc.com>
534 * NEWS: Make note of the new MIPS disassembly option "no-aliases".
535 * doc/binutils.texi (objdump): Document the "no-aliases"
538 2005-01-17 Eugene Kotlyarov <ekot@narod.ru>
541 * rcparse.y (RCDATA): Allow a filename to be supplied as the
542 parameter. Parse it with define_rcdata_file().
543 * resrc.c (define_rcdata_file): New function.
544 * windres.h: Provide a prototype for the new function.
546 * resrc.c (define_user_file): Fix typo by replacing "font file"
549 2005-01-16 Jason Thorpe <thorpej@netbsd.org>
551 * MAINTAINERS: Update my email address.
553 2005-01-16 Danny Smith <dannysmith@users.sourceforge.net>
555 * dlltool.c (set_dll_name_from_def): New function. Strip name
556 to basename, with warning.
558 (def_library): Likwise.
559 (main): Strip arg of --dllname to basename, with warning.
560 Only use basename of exp_name when inferring dll_name.
562 2005-01-11 Nick Clifton <nickc@redhat.com>
565 * doc/binutils.texi (c++filt): Use uppercase CXXFILT in the
566 footnote in order to prevent the sed script in the Makefile from
567 converting it into c++filt.
569 2005-01-10 H.J. Lu <hongjiu.lu@intel.com>
572 readelf.c (saved_base_address): Removed.
573 (decode_64bit_range): Likewise.
574 (decode_range): Likewise.
575 (display_64bit_debug_ranges): Likewise.
576 (debug_info): Add range_lists, num_range_lists and
578 (read_and_display_attr_value): Handle do_debug_ranges.
579 (process_debug_info): Likewise.
580 (display_debug_ranges): Rewrite.
581 (process_object): Free range_lists.
583 2005-01-10 Andreas Schwab <schwab@suse.de>
585 * configure.in: Don't define SKIP_ZEROES.
586 * configure: Regenerate.
587 * objdump.c (disassemble_data): Set skip_zeroes and
588 skip_zeroes_at_end in disasm_info to defaults.
589 (DEFAULT_SKIP_ZEROES): Rename from SKIP_ZEROES and always define.
590 (DEFAULT_SKIP_ZEROES_AT_END): Rename from SKIP_ZEROES_AT_END and
592 (disassemble_bytes): Use skip_zeroes and skip_zeroes_at_end from
595 2005-01-05 H.J. Lu <hongjiu.lu@intel.com>
597 * readelf.c (display_debug_loc): Display base address
598 specifiers. Always output <End of list>.
600 2005-01-05 H.J. Lu <hongjiu.lu@intel.com>
602 * readelf.c (have_frame_base): New.
603 (need_base_address): Likewise.
604 (saved_base_address): Likewise.
605 (decode_location_expression): Return 1 if DW_AT_frame_base is
607 (debug_info): Add base_address and a have_frame_base pointer.
608 (read_and_display_attr_value): Replace saved_DW_AT_low_pc with
609 saved_base_address. Record base address. Set have_frame_base.
610 Record if a location list has DW_AT_frame_base. Display if a
611 location expression has no DW_AT_frame_base but needs one. Set
612 saved_base_address only if needed.
613 (process_debug_info): Clear have_frame_base, saved_base_address
614 and set need_base_address.
615 (display_debug_loc): Display if a location expression has no
616 DW_AT_frame_base but needs one. Display if start >= end. Don't
617 adjust for section address. Properly handle base address.
618 (process_object): Free the have_frame_base pointer in
621 2005-01-04 H.J. Lu <hongjiu.lu@intel.com>
623 * readelf.c (display_debug_loc): Display offsets for hole and
625 (display_debug_str): Add a newline at the end.
627 2005-01-04 Armin Diehl <diehl@nordrhein.de>
630 * nlmconv.c (main): Only store the basename of the output filename
633 2005-01-04 H.J. Lu <hongjiu.lu@intel.com>
636 * readelf.c (process_debug_info): New.
637 (debug_info): Add num_loc_offsets, loc_offsets and
639 (get_debug_info): Use process_debug_info.
640 (display_debug_loc): Properly handle location list. Warn if bad
641 location lists are encoutnered.
642 (read_and_process_attr_value): New.
643 (read_and_display_attr_value): Use "%lx" for DW_FORM_data4.
644 (display_debug_info): Use process_debug_info.
645 (process_object): Also free loc_offsets in debug_information.
647 2004-12-31 Alan Modra <amodra@bigpond.net.au>
649 * objdump.c (remove_useless_symbols): Discard section symbols.
651 2004-12-27 H.J. Lu <hongjiu.lu@intel.com>
653 * readelf.c (read_leb128): Support 64bit host.
655 2004-12-23 Nick Clifton <nickc@redhat.com>
658 * readelf.c (debug_info): Add 'cu_offset' field.
659 (get+pointer_size_of_comp_unit): Rename to
660 'get_pointer_size_and_offset_of_comp_unit'. Add code to return
661 the offset of the comp_unit if requested.
662 (get_debug_info): Record comp_unit offsets as well.
663 (display_debug_lines): Call get_pointer_size_of_comp_unit.
664 (decode_location_expression): Add an extra parameter - the offset
665 of the current comp-unit. Use this when decoding the DW_OP_call2
666 and DW_OP_call4 operators.
667 (display_debug_loc): Call get_pointer_size_of_comp_unit, pass the
668 comp_unit offset on the decode_location_expression.
669 (read_and_display_attr_value): Pass the comp_unit offset on the
670 decode_location_expression.
671 (display_debug_frames): Pass 0 as the comp_unit offset to
672 decode_location_expression.
674 2004-12-22 Nick Clifton <nickc@redhat.com>
676 * readelf.c (last_pointer_size, warned_about_missing_comp_units):
677 New variables associated with obtaining the pointer size for a
679 (get_pointer_size_of_comp_unit): Add an extra parameter - the name
680 of the section requesting the pointer size. Use this name in
681 error messages. If there are not enough comp_units available
682 produce a warning message, but return the last known pointer size
683 so that section dumping can continue.
684 (get_debug_info): Reset the new variables.
685 (display_debug_lines): Add extra parameter to invocation of
686 get_pointer_size_of_comp_unit and remove error message when it
688 (display_debug_loc): Likewise.
690 2004-12-15 Jan Beulich <jbeulich@novell.com>
692 * doc/binutils.texi: Document --strip-unneeded-symbol and
693 --strip-unneeded-symbols.
694 * objcopy.c (strip_unneeded_list): New.
695 (enum command_line_switch): Add OPTION_STRIP_UNNEEDED_SYMBOL
696 and OPTION_STRIP_UNNEEDED_SYMBOLS.
697 (copy_options): Add --strip-unneeded-symbol and
698 --strip-unneeded-symbols.
699 (copy_usage): Likewise.
700 (filter_symbols): Suppress copying of symbol if in strip_unneeded_list
701 and the symbol is not needed.
702 (copy_main): Handle OPTION_STRIP_UNNEEDED_SYMBOL and
703 OPTION_STRIP_UNNEEDED_SYMBOLS.
705 2004-12-09 Ian Lance Taylor <ian@wasabisystems.com>
707 * readelf.c (get_machine_flags): Handle E_MIPS_MACH_9000.
709 2004-12-08 Ben Elliston <bje@au.ibm.com>
711 * arlex.l: Fix formatting.
713 2004-12-08 Ben Elliston <bje@au.ibm.com>
715 * doc/Makefile.am (config.texi): Emit a @set UPDATED command to
716 config.texi whose value is the current month and year.
717 * doc/Makefile.in: Rebuild.
718 * doc/binutils.texi: Set the document subtitle to be the value of
719 the Texinfo UPDATED variable (obtained from config.texi).
721 2004-12-07 Ben Elliston <bje@au.ibm.com>
724 * doc/binutils.texi (def file format): New node.
725 (dlltool): Use the tool name as the @chapter name, like all the
726 other binutils. Use @file{.def} throughout for consistency.
728 2004-12-06 Ben Elliston <bje@au.ibm.com>
730 * dlltool.c: Comment fix.
732 2004-12-06 Ben Elliston <bje@au.ibm.com>
734 * doc/binutils.texi: Update copyright years.
736 2004-12-03 Richard Sandiford <rsandifo@redhat.com>
738 * MAINTAINERS: Remove mention of config.if.
740 2004-11-30 Tero Niemela <tero_niemela@yahoo.com>
742 * Makefile.am: Change LOCALEDIR to $(datadir)/share.
743 * Makefile.in: Regenerate.
745 2004-11-10 Ian Lance Taylor <ian@wasabisystems.com>
748 * stabs.c (stab_demangle_template): Call stab_demangle_count
749 rather than stab_demangle_get_count to get the length of a pointer
752 2004-11-10 Danny Smith <dannysmith@users.sourceforge.net>
754 * defparse.y: Remove unnecessary commas from token list.
756 2004-11-08 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
758 * doc/binutils.texi (nm): Update description of weak symbols.
760 2004-11-03 Nick Clifton <nickc@redhat.com>
762 * readelf.c (do_debug_ranges): New variable.
763 (usage): Document new switch: -wR or --debug-dump=Ranges.
764 (parse_args): Handle new switch. Replace switch statement for the
765 long options with a more compact table structure.
766 (process_section_headers): Allow the dumping of .debug_ranges
767 sections if so requested.
768 (debug_displays): Likewise.
769 (load_debug_range): New function: Grabs the contents of a
770 .debug_ranges section.
771 (free_debug_range): New function: Releases the grabbed
772 .debug_ranges section.
773 (decode_64bit_range): New function: Displays a 64-bit range in a
774 .debug_ranges section.
775 (decode_range): New function: Displays a 32-bit range in a
776 .debug_ranges section.
777 (read_and_display_attr_value): Record the value of DW_AT_low_pc
778 attributes. Use decode_ranges() to display a DW_AT_ranges
780 (display_debug_info): Use load_debug_range() and
782 (display_64bit_debug_ranges): New function. Displays the contents
783 of a 64-bit format .debug_ranges section.
784 (display_debug_ranges): New function: Displays the contents of a
785 32-bit .debug_ranges section.
787 (main): Move cmdline_dump_sects and num_cmdline_dump_sects into the
789 (process_object): Initialise the dump_sects array from the
790 cmdline_dump_sects array before processing each object file.
792 (streq, strneq): New macros. Use them to replace occurrences of
793 strcmp() and strncmp().
795 (debug_information): New structure array to replace
796 debug_line_pointer_sizes array.
797 (num_debug_info_entries): New variable to replace
798 num_debug_line_pointers.
799 (get_pointer_size_of_comp_unit): New function: Returns the pointer
800 size of a given compilation unit.
801 (get_debug_info): New function to replace
802 get_debug_line_pointer_sizes.
803 (display_debug_lines): Use the new functions.
804 (display_debug_loc): Likewise.
806 (disassemble_section): Change return type to int.
807 (display_debug_lines): Move local variables to their
809 (display_debug_section): Likewise. Also record the return value
810 of functions called and pass this back to the parent. Also only
811 warn about undumped sections when the user explicitly requested
814 (debug_apply_rela_addends): Allow relocations against STT_OBJECT
817 * NEWS: Mention the support for decoding .debug_ranges sections.
818 * doc/binutils.texi: Document the new command line switch to
821 2004-11-03 Randolph Chung <tausq@debian.org>
823 * readelf.c (ia64_unw_aux_info, ia64_unw_table_entry): Rename from
824 unw_aux_info and unw_table_entry.
825 (find_symbol_for_address): Pass symtab and strtab info explicitly.
826 (dump_ia64_unwind): Rename unw_{aux_info,table_entry} with ia64_
828 (slurp_ia64_unwind_table): Likewise.
829 (ia64_process_unwind): Rename from old process_unwind.
830 (hppa_unw_aux_info): New.
831 (dump_hppa_unwind): New.
832 (slurp_hppa_unwind_table): New.
833 (hppa_process_unwind): New.
834 (process_unwind): Factor out common unwinding checks; dispatch to
835 unwind handler based on machine type.
837 2004-11-02 Nick Clifton <nickc@redhat.com>
839 * readelf.c (display_debug_lines): Fix typo in error message.
841 2004-10-26 Mark Mitchell <mark@codesourcery.com>
843 * readelf.c (get_note_type): Handle notes not in core files.
844 (process_note_sections): New function.
845 (process_corefile_contents): Rename to ...
846 (process_notes): ... this.
847 (process_object): Call process_notes, not
848 process_corefile_contents.
849 * doc/binutils.texi: Update readelf -n documentation.
851 2004-10-26 Jakub Jelinek <jakub@redhat.com>
853 * ar.c (extract_file): Set atime to mtime for ar xo.
855 2004-10-25 Ian Lance Taylor <ian@wasabisystems.com>
857 * stabs.c (stab_demangle_v3_arglist): New static function, broken
858 out of stab_demangle_v3_argtypes.
859 (stab_demangle_v3_argtypes): Call it.
860 (stab_demangle_v3_arg): Handle DEMANGLE_COMPONENT_FUNCTION_TYPE.
861 If we find an unrecognized component, print out its number.
863 2004-10-25 David Mosberger <davidm@hpl.hp.com>
865 * readelf.c (slurp_ia64_unwind_table): Support relocations against
866 non-section symbols by adding in the symbol value.
868 2004-10-25 Nick Clifton <nickc@redhat.com>
871 * readelf.c (dynamic_strings_length): New global variable.
872 (VALID_DYNAMIC_NAME, GET_DYNAMIC_NAME): New macros for accessing
873 strings in the dynamic string table.
874 (process_section_headers): Initialise dynamic_strings_length.
875 (process_dynamic_section): Likewise.
876 (process_object): Reset dynamic_string_length when the buffer is freed.
877 (dynamic_sections_mips_val): Use the new macros.
878 (process_dynamic_section): Likewise.
879 (process_version_sections): Likewise.
880 (process_symbol_table): Likewise.
881 (process_syminfo): Likewise.
882 (process_mips_specific): Likewise.
883 (dump_relocations): Add a new parameter 'strtablen' and use this
884 to verify that string offset in a given reloc is valid. Print a
885 suitable error message otherwise.
886 (process_relocs): Pass the new argument to dump_relocations.
888 2004-10-23 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
890 * dlltool.c: Include <assert.h>.
891 (PREFIX_ALIAS_BASE): Define.
892 (struct export): Add member import_name;
893 (def_exports): Set import_name.
894 (make_one_lib_file): Remove prefix alias code, use import_name
896 (gen_lib_file): Create and delete aliases.
898 2004-10-19 H.J. Lu <hongjiu.lu@intel.com>
900 * readelf.c (process_section_groups): Free symtab after use.
902 2004-10-18 Tommy Pettersson <ptp@lysator.liu.se>
903 Nick Clifton <nickc@redhat.com>
905 * strings.c (usage): Place radix values for -t option into the
908 * objcopy.c (add_redefine_syms_file): Change error messages to use
909 <filename>:<linenumber>: format for easier parsing by automatic
912 * srconv.c (show_usage): Fix spelling typo.
914 * windres.c (format_from_filename): Suggest the use of -J instead
915 of -I if the file type cannot be determined.
917 2004-10-18 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
919 * strings.c: Include <sys/stat.h>.
921 2004-10-18 Alan Modra <amodra@bigpond.net.au>
923 * budemang.c (demangle): Fix thinko.
925 * budemang.c (demangle): Handle "@plt" suffix.
927 2004-10-14 Nick Clifton <nickc@redhat.com>
929 * nm.c (usage): Fix description of --special-syms switch.
931 2004-10-13 Jakub Jelinek <jakub@redhat.com>
933 * strings.c (statbuf): New typedef.
935 (strings_object_file): Avoid using get_file_size, instead do the
936 checks here, using file_stat.
937 * configure.in (HAVE_STAT64): New test.
938 * configure: Rebuilt.
939 * config.in: Rebuilt.
941 2004-10-12 Paul Brook <paul@codesourcery.com>
943 * readelf.c (decode_ARM_machine_flags): Support EABI version 4.
945 2004-10-11 Alan Modra <amodra@bigpond.net.au>
947 * objdump.c (dump_symbols): Fix thinko last change. Improve error
950 2004-10-08 Nick Clifton <nickc@redhat.com>
952 * nm.c: Add a new switch --special-syms which, if enabled, will
953 include the ARM Mapping symbols in nm's output.
954 (usage): Mention the switch.
955 (filter_symbols): Handle the switch.
956 * objdump.c: Add a similar switch.
957 (usage): Mention the switch.
958 (dump_symbols): Handle the switch.
959 * doc/binutils.texi: Document the new switches.
960 * NEWS: Mention the new switches.
962 2004-10-08 Daniel Jacobowitz <dan@debian.org>
964 * readelf.c (get_x86_64_section_type_name): New function.
965 (get_section_type_name): Use it.
967 2004-10-08 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
969 * dlltool.c (make_one_lib_file): Revert 2004-09-02 and 2004-09-04
971 * doc/binutils.texi (dlltool): Revert 2004-09-06 patch.
973 2004-10-07 Alexandre Oliva <aoliva@redhat.com>
975 * readelf.c (get_machine_flags): Don't fall through into m68k cpu
978 2004-10-01 Paul Brook <paul@codesourcery.com>
980 * readelf.c (get_arm_section_type_name): New function.
981 (get_section_type_name): Use it.
983 2004-09-28 Nick Clifton <nickc@redhat.com>
985 * nm.c: Reorder functions to eliminate most of the static function
988 2004-09-22 Alan Modra <amodra@bigpond.net.au>
990 * readelf.c (process_program_headers): Don't include .tbss in non-TLS
993 2004-09-17 Alan Modra <amodra@bigpond.net.au>
995 * Makefile.am: Run "make dep-am".
996 * Makefile.in: Regenerate.
997 * config.in: Regenerate.
998 * configure: Regenerate.
999 * doc/Makefile.in: Regenerate.
1000 * po/binutils.pot: Regenerate.
1002 2004-09-12 Alan Modra <amodra@bigpond.net.au>
1004 * readelf.c (decode_location_expression): Sign extend value for
1005 DW_OP_const1s, DW_OP_const2s, DW_OP_const4s, DW_OP_bra, DW_OP_skip.
1007 2004-09-09 Nick Clifton <nickc@redhat.com>
1010 * ar.c (replace_members): Do not use get_file_size as
1011 ar_emul_append correctly handles missing files.
1013 2004-09-07 H.J. Lu <hongjiu.lu@intel.com>
1015 * configure: Regenerated with autconfig 2.13.
1017 2004-09-06 Danny Smith <dannysmith@users.sourceforge.net>
1019 * doc/binutils.texi (dlltool): Update --add-underscore, --kill-at
1022 2004-09-06 Michael Wardle <mbw@endbracket.net>
1024 * doc/binutils.texi (objdump): Document that the -x switch includes
1025 the effect of the -p switch.
1027 2004-09-04 Danny Smith <dannysmith@users.sourceforge.net>
1029 * dlltool.c (make_one_lib_file): Test if internal_name was
1030 specified by user before using it.
1032 2004-09-02 Carlo Wood <carlo@alinoe.com>
1035 * dlltool.c (make_one_lib_file): For IDATA6 take the name from
1036 exp->internal_name if it is present.
1038 2004-09-02 Alexandre Oliva <aoliva@redhat.com>
1040 * MAINTAINERS: Add self as co-maintainer of FR-V.
1041 * readelf.c (get_machine_flags): Print FR-V cpu types.
1043 2004-08-28 Alan Modra <amodra@bigpond.net.au>
1045 * nm.c (show_synthetic): New var.
1046 (long_options): Add "synthetic".
1048 (display_rel_file): Handle show_synthetic.
1050 2004-08-28 Alan Modra <amodra@bigpond.net.au>
1052 * objdump.c (dump_bfd): Pass both symbol tables to
1053 bfd_get_synthetic_symtab.
1055 2004-08-17 Jakub Jelinek <jakub@redhat.com>
1057 * objdump.c (dump_bfd): For relocatable objects, pass syms instead
1058 of dynsyms to bfd_get_synthetic_symtab.
1060 2004-08-16 Alan Modra <amodra@bigpond.net.au>
1062 * readelf.c (debug_apply_rela_addends): New function, extracted from..
1063 (display_debug_info): ..here.
1064 (display_debug_frames): Call debug_apply_rela_addends. Don't do
1065 DW_EH_PE_pcrel adjustment for ET_REL.
1067 2004-08-06 Andreas Schwab <schwab@suse.de>
1069 * readelf.c (dump_relocations): Fix typo when calculating
1072 2004-08-02 Jakub Bogusz <qboosh@pld-linux.org>
1074 * dllwrap.c (deduce_name): Fix typos introduced when program_name
1075 was renamed to prog_name.
1077 2004-07-29 Alexandre Oliva <aoliva@redhat.com>
1079 * readelf.c (get_machine_flags <EM_SH>): Handle EF_SH2A and
1082 2004-07-28 Alexandre Oliva <aoliva@redhat.com>
1084 2003-07-08 Alexandre Oliva <aoliva@redhat.com>
1085 * readelf.c (get_machine_flags <EM_SH)): Handle EF_SH4_NOFPU and
1087 2003-06-12 Alexandre Oliva <aoliva@redhat.com>
1088 * readelf.c (get_machine_flags <EM_SH>): Print SH ISA name.
1090 2004-07-21 H.J. Lu <hongjiu.lu@intel.com>
1092 * objcopy.c (filter_symbols): Use bfd_coff_get_comdat_section
1094 * objdump.c (dump_section_header): Likewise.
1096 2004-07-15 Aravinda PR <aravindapr@rediffmail.com>
1098 * nlmconv.c (main): Pass map_file argument to link_inputs.
1099 (link_inputs): Use map_file argument if it is defined.
1101 2004-07-13 Nick Clifton <nickc@redhat.com>
1103 * dllwrap.c: Replace 'program_name' with 'prog_name' to avoid
1104 conflicts with exported global defined in bucomm.h.
1105 (deduce_name): Rename parameter 'program_name' to 'name' to avoid
1106 shadowing the global defined in bucomm.h.
1108 2004-07-12 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1110 * dlltool.c (ext_prefix_alias): New global variable.
1111 (make_one_lib_file): Add aliases with prefixes for external
1112 and import definitions.
1113 (usage): Document -p option.
1114 (long_options): Add --ext-prefix-alias option.
1116 * doc/binutils.texi: Document new switch.
1117 * NEWS: Mention new switch.
1119 2004-07-09 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1121 * binutils/dlltool.c (asm_prefix): Add parameter: name.
1122 No underscore for symbols beginning with ?.
1123 (ASM_PREFIX): Add parameter: NAME.
1124 (gen_exp_file): Use new parameter.
1125 (make_label): Likewise.
1126 (make_imp_label): Likewise.
1127 (make_one_lib_file): Likewise.
1129 2004-07-07 Tomer Levi <Tomer.Levi@nsc.com>
1131 * MAINTAINERS: Added myself to the list.
1132 * readelf.c: Include "elf/crx.h".
1133 (guess_is_rela): Handle EM_CRX.
1134 (get_machine_name): Likewise.
1135 (dump_relocations): Likewise.
1137 2004-07-03 Aaron W. LaFramboise <aaron98wiridge9@aaronwl.com>
1139 * doc/binutils.texi (nm): Clarify weak symbol description.
1141 2004-06-24 Ben Elliston <bje@au.ibm.com>
1143 * readelf.c (get_segment_type): Display "GNU_STACK", not just
1144 "STACK", when a PT_GNU_STACK segment is encountered.
1146 2004-06-24 Alan Modra <amodra@bigpond.net.au>
1148 * objcopy.c (copy_section): Don't set _cooked_size.
1150 2004-06-22 Alan Modra <amodra@bigpond.net.au>
1152 * readelf.c (Elf32_Word): Delete.
1153 (get_32bit_dynamic_section): Handle SGI ELF dynamic segment.
1154 (get_64bit_dynamic_section): Likewise.
1156 * readelf.c (get_32bit_dynamic_section): Stop at first DT_NULL entry.
1157 (get_64bit_dynamic_section): Likewise.
1159 * readelf.c (dynamic_nent): New variable.
1160 (get_32bit_dynamic_section): Set it.
1161 (get_64bit_dynamic_section): Here too.
1162 (process_dynamic_section): Use it instead of dynamic_size.
1163 (process_syminfo): Likewise.
1165 * readelf.c (get_32bit_dynamic_section): Correct number of entries
1166 translated from external to internal form.
1167 (get_64bit_dynamic_section): Likewise.
1169 2004-06-18 Jie Zhang <zhangjie@magima.com.cn>
1171 * readelf.c (process_program_headers): When locating the dynamic
1172 section use the section table if it is present.
1173 (dynamic_segment): Renamed to dynamic_section.
1174 Replace references to dynamic segment with references to dynamic
1175 section, except where appropriate.
1176 (dynamic_segment_mips_val): Rename to dynamic_section_mips_val.
1177 (dynamic_segment_parisc_val): Rename to dynamic_section_parisc_val.
1178 (dynamic_segment_ia64_val): Rename to dynamic_section_ia64_val.
1179 (get_32bit_dynamic_segment): Rename to get_32bit_dynamic_section.
1180 Remove tag counting code as it is no longer needed.
1181 (get_64bit_dynamic_segment): Rename to get_64bit_dynamic_section.
1182 Remove tag counting code as it is no longer needed.
1183 (process_dynamic_segment): Rename to process_dynamic_section.
1185 2004-06-15 Alan Modra <amodra@bigpond.net.au>
1187 * objcopy.c (copy_section): Use bfd_get_section_size instead of
1188 _raw_size or bfd_get_section_size_before_reloc. Don't set reloc_done.
1189 (compare_section_lma): Likewise.
1190 * addr2line.c (find_address_in_section): Likewise.
1191 * coffgrok.c (do_sections_p1): Likewise.
1192 * dlltool.c (scan_drectve_symbols): Likewise.
1193 * nlmconv.c (main): Likewise.
1194 (copy_sections): Likewise.
1195 (powerpc_mangle_relocs): Likewise.
1196 * objdump.c (disassemble_section): Likewise.
1197 * prdbg.c (find_address_in_section): Likewise.
1198 * size.c (berkeley_sum): Likewise.
1199 * srconv.c (wr_ob): Likewise.
1200 * strings.c (strings_a_section): Likewise.
1202 2004-05-28 Ian Lance Taylor <ian@wasabisystems.com>
1204 * readelf.c (decode_ARM_machine_flags): Add EF_ARM_VFP_FLOAT.
1206 2004-05-17 David Heine <dlheine@tensilica.com>
1208 * objcopy.c (setup_bfd_headers): New function.
1209 (copy_object): Call setup_bfd_headers.
1211 2004-05-13 Paul Brook <paul@codesourcery.com>
1213 * readelf.c (display_debug_frames): Handle dwarf3 format CIE
1216 2004-05-13 Nick Clifton <nickc@redhat.com>
1218 * po/fr.po: Updated French translation.
1220 2004-05-11 Jakub Jelinek <jakub@redhat.com>
1222 * readelf.c (get_segment_type): Handle PT_GNU_RELRO.
1224 2004-05-07 H.J. Lu <hongjiu.lu@intel.com>
1226 * readelf.c (section_groups): New.
1228 (section_headers_groups): New.
1229 (process_section_groups): Populate group_count, section_groups
1230 and section_headers_groups.
1231 (process_unwind): Support section group.
1232 (process_object): Always call process_section_groups. Free
1233 section_groups and section_headers_groups.
1235 2004-04-30 H.J. Lu <hongjiu.lu@intel.com>
1237 * readelf.c (process_section_headers): Use %3lu on sh_info.
1239 2004-04-30 Michael Deutschmann <michael@talamasca.ocis.net>
1241 * ranlib.sh: Quote $1 argument in case it contains spaces.
1243 2004-04-27 John Paul Wallington <jpw@gnu.org>
1245 * objcopy.c (copy_usage, strip_usage): Fix spelling.
1247 2004-04-26 H.J. Lu <hongjiu.lu@intel.com>
1249 * readelf.c (do_section_groups): New.
1250 (options): Add --section-groups/-g.
1251 (usage): Mention --section-groups/-g.
1252 (parse_args): Support --section-groups/-g.
1253 (get_group_flags): New.
1254 (process_section_groups): New.
1255 (process_object): Call process_section_groups.
1257 2004-04-24 Alan Modra <amodra@bigpond.net.au>
1259 * objdump.c (disassemble_section): Don't disassemble sections
1260 without SEC_HAS_CONTENTS.
1262 2004-04-22 Jakub Jelinek <jakub@redhat.com>
1264 * objdump.c (synthsyms, synthcount): New variables.
1265 (disassemble_data): Use dynsyms for stripped binaries or libraries.
1266 Add synthetized symbols.
1267 (dump_bfd): For disassemble, initialize dynsyms always and
1268 also synthsyms. Free synthsyms and clear {sym,dynsym,synth}count
1271 2004-04-14 Alan Modra <amodra@bigpond.net.au>
1273 * strings.c (print_strings): Cast file_off to unsigned long in
1276 2004-04-07 Benjamin Monate <benjamin.monate@cea.fr>
1279 * arsup.c (ar_save): Use smart_rename.
1281 2004-04-01 Dean Luick <luick@cray.com>
1283 * readelf.c (display_debug_pubnames): Align offset and data
1285 (read_and_display_attr_value): Add missing break;
1286 (debug_displays): Enable the display of the .debug_pubtypes
1289 2004-03-30 Stan Shebs <shebs@apple.com>
1291 * mpw-config.in, mpw-make.sed, mac-binutils.r: Remove MPW
1292 support files, no longer used.
1294 2004-03-23 Paul Brook <paul@codesourcery.com>
1296 * readelf.c (decode_ARM_machine_flags): Add EABI v3.
1298 2004-03-21 Richard Henderson <rth@redhat.com>
1300 * readelf.c (display_debug_frames): Don't crash for mismatched
1301 DW_CFA_restore_state.
1303 2004-03-19 Alan Modra <amodra@bigpond.net.au>
1305 * Makefile.am: Run "make dep-am".
1306 * Makefile.in: Regenerate.
1307 * aclocal.m4: Regenerate.
1308 * config.in: Regenerate.
1309 * configure: Regenerate.
1310 * po/binutils.pot: Regenerate.
1312 2004-03-15 Nathan Sidwell <nathan@codesourcery.com>
1314 * objdump.c (struct SFILE): Replace current pointer with pos
1315 offset, rename size to alloc.
1316 (objdump_sprintf): Avoid unnecessary copies in the common case
1317 (disassemble_bytes): Keep sfile live throughout the
1318 function. Adjust usage appropriately.
1320 2004-03-10 Ben Elliston <bje@gnu.org>
1322 * MAINTAINERS: Update my mail address.
1324 2004-03-08 Danny Smith <dannysmith@users.sourceforge.net>
1326 * deflex.l: Handle "PRIVATE" string.
1327 * defparse.y (%token): Add PRIVATE.
1328 (%type): Add opt_PRIVATE.
1329 (expline): Pass opt_PRIVATE to def_exports.
1330 (opt_PRIVATE): Handle PRIVATE token.
1331 * dlltool.h (def_exports): Add 7th param for private flag to
1333 * dlltool.c: Add PRIVATE to comment on EXPORTS syntax.
1334 (struct export): Add 'private' field.
1335 (def_exports): Set 'private' field of struct exports.
1336 (scan_drectve_symbols): Adjust calls to def_exports.
1337 (scan_filtered_symbols): Likewise.
1338 (dump_def_info): Print 'private' field.
1339 (gen_def_file): Likewise.
1340 (gen_lib_file): Skip generation of lib object if private.
1341 Delete tmp object files in same order as they were generated.
1342 Don't delete non-existent private object files.
1344 2004-02-27 Andreas Schwab <schwab@suse.de>
1346 * ar.c (main): Support POSIX-compatible argument parsing.
1348 2004-02-23 Daniel Lucq <daniel@lucq.org>
1350 * readelf.c (process_mips_specific): Print conflictsno as an
1353 2004-02-21 Dmitry Timoshkov <dmitry@baikal.ru>
1355 * dlltool.c (gen_exp_file): Always output names for forwarded symbols.
1357 2004-02-19 Jakub Jelinek <jakub@redhat.com>
1359 * objcopy.c (copy_section): Avoid warnings.
1361 2004-02-14 Andrew Cagney <cagney@redhat.com>
1363 * ar.c (remove_output): Use bfd_cache_close.
1364 * arsup.c (ar_end): Ditto.
1366 2004-01-21 Roland McGrath <roland@redhat.com>
1368 * readelf.c (get_note_type): Match NT_AUXV.
1370 2004-01-20 Nick Clifton <nickc@redhat.com>
1372 * version.c (print_version): Update copyright year to 2004.
1374 2004-01-14 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1376 * acinclude.m4: Quote names of macros to be defined by AC_DEFUN
1378 * aclocal.m4: Regenerate.
1379 * configure: Regenerate.
1381 2004-01-12 Jakub Jelinek <jakub@redhat.com>
1383 * objcopy.c: Include elf-bfd.h.
1384 (is_strip_section): Don't strip debugging sections if
1386 (setup_section): If STRIP_NONDEBUG make SEC_ALLOC sections
1387 ~(SEC_LOAD | SEC_HAS_CONTENTS) and on ELF targets also SHT_NOBITS.
1389 * objcopy.c (copy_section): Free relpp if relcount == 0.
1391 2004-01-12 Ian Lance Taylor <ian@wasabisystems.com>
1393 * stabs.c (parse_stab_argtypes): Handle g++ ABI version 3 names.
1394 (stab_demangle_argtypes): Likewise.
1395 (stab_demangle_v3_argtypes): New static function.
1396 (stab_demangle_v3_arg): New static function.
1398 2004-01-12 Nick Clifton <nickc@redhat.com>
1400 * objcopy.c (copy_object): Make the function boolean, returning
1402 (copy_archive): Handle the return value from copy_object.
1403 (copy_file): Likewise.
1405 2004-01-07 Nick Clifton <nickc@redhat.com>
1407 * readelf.c (find_section): New function. Locates a named
1409 (get_debug_line_pointer_sizes): New function: Initialises the
1410 debug_line_pointer_sizes array.
1411 (display_debug_lines): Call get_debug_line_pointer_sizes.
1412 (display_debug_loc): Likewise.
1413 (load_debug_loc): Use find_section.
1414 (load_debug_str): Likewise.
1415 (display_debug_info): Likewise.
1416 (prescan_debug_info): Delete.
1417 (debug_displays): Remove prescan field.
1418 (process_section_contents): Do not perform prescans.
1420 2004-01-03 Alan Modra <amodra@bigpond.net.au>
1422 * objcopy.c (filter_bytes): Delete. Move code to..
1423 (copy_section): ..here. Simplify size adjustment. Divide
1424 section lma by interleave.
1426 2004-01-02 Nick Clifton <nickc@redhat.com>
1428 * po/ru.po: New file: Russian translation.
1429 * configure.in (ALL_LINGUAS): Add ru
1430 * configure: Regenerate.
1432 For older changes see ChangeLog-0203
1438 version-control: never