binutils/Makefile.am

   1 ## Process this file with automake to generate Makefile.in
   2 #
   3 #   Copyright (C) 2012-2016 Free Software Foundation, Inc.
   4 #
   5 # This file is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 3 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; see the file COPYING3.  If not see
  17 # <http://www.gnu.org/licenses/>.
  18 #
  19
  20 AUTOMAKE_OPTIONS = dejagnu no-dist foreign
  21 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
  22
  23 SUBDIRS = doc po
  24
  25 tooldir = $(exec_prefix)/$(target_alias)
  26
  27 ## These aren't set by automake, because they appear in
  28 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
  29 ## thus is not seen by automake.
  30 CC_FOR_BUILD = @CC_FOR_BUILD@
  31 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
  32
  33 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
  34 YFLAGS = -d
  35 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
  36 LEXLIB = @LEXLIB@
  37
  38 # Automake 1.10+ disables lex and yacc output file regeneration if
  39 # maintainer mode is disabled.  Avoid this.
  40 am__skiplex =
  41 am__skipyacc =
  42
  43 # This is where we get zlib from.  zlibdir is -L../zlib and zlibinc is
  44 # -I../zlib, unless we were configured with --with-system-zlib, in which
  45 # case both are empty.
  46 ZLIB = @zlibdir@ -lz
  47 ZLIBINC = @zlibinc@
  48
  49 WARN_CFLAGS = @WARN_CFLAGS@
  50 NO_WERROR = @NO_WERROR@
  51 AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC)
  52 LIBICONV = @LIBICONV@
  53
  54 # these two are almost the same program
  55 AR_PROG=ar
  56 RANLIB_PROG=ranlib
  57
  58 # objcopy and strip should be the same program
  59 OBJCOPY_PROG=objcopy
  60 STRIP_PROG=strip-new
  61
  62 STRINGS_PROG=strings
  63
  64 READELF_PROG=readelf
  65
  66 ELFEDIT_PROG=elfedit
  67
  68 # These should all be the same program too.
  69 SIZE_PROG=size
  70 NM_PROG=nm-new
  71 OBJDUMP_PROG=objdump
  72
  73 # This is the demangler, as a standalone program.
  74 # Note: This one is used as the installed name too, unlike the above.
  75 DEMANGLER_PROG=cxxfilt
  76
  77 ADDR2LINE_PROG=addr2line
  78
  79 NLMCONV_PROG=nlmconv
  80 DLLTOOL_PROG=dlltool
  81 WINDRES_PROG=windres
  82 WINDMC_PROG=windmc
  83 DLLWRAP_PROG=dllwrap
  84
  85 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
  86
  87 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@
  88
  89 bin_SCRIPTS = @BUILD_INSTALL_MISC@
  90 EXTRA_SCRIPTS = embedspu
  91
  92 ## Test programs.
  93 BFDTEST1_PROG = bfdtest1
  94 BFDTEST2_PROG = bfdtest2
  95
  96 TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG)
  97
  98 ## We need a special rule to install the programs which are built with
  99 ## -new, and to rename cxxfilt to c++filt.
 100 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
 101 noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@
 102
 103 EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
 104
 105 # Stuff that goes in tooldir/ if appropriate.
 106 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf
 107
 108 BASEDIR = $(srcdir)/..
 109 BFDDIR = $(BASEDIR)/bfd
 110 INCDIR  = $(BASEDIR)/include
 111
 112 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
 113          @HDEFINES@ \
 114          @INCINTL@ \
 115          -DLOCALEDIR="\"$(datadir)/locale\"" \
 116          -Dbin_dummy_emulation=$(EMULATION_VECTOR)
 117
 118 HFILES = \
 119         arsup.h binemul.h bucomm.h budbg.h \
 120         coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h nlmconv.h \
 121         objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
 122         windmc.h
 123
 124 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
 125 BUILT_SOURCES = $(GENERATED_HFILES)
 126
 127 CFILES = \
 128         addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
 129         coffdump.c coffgrok.c cxxfilt.c \
 130         dwarf.c debug.c dlltool.c dllwrap.c \
 131         elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
 132         ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
 133         nlmconv.c nm.c not-ranlib.c not-strip.c \
 134         objcopy.c objdump.c prdbg.c \
 135         od-xcoff.c od-macho.c \
 136         rclex.c rdcoff.c rddbg.c readelf.c rename.c \
 137         resbin.c rescoff.c resrc.c resres.c \
 138         size.c srconv.c stabs.c strings.c sysdump.c \
 139         syslex_wrap.c unwind-ia64.c elfedit.c version.c \
 140         windres.c winduni.c wrstabs.c \
 141         windmc.c mclex.c
 142
 143 GENERATED_CFILES = \
 144         arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
 145         defparse.c deflex.c nlmheader.c rcparse.c mcparse.c
 146
 147 DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
 148 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
 149
 150 # Extra object files for objdump
 151 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
 152
 153 # Code shared by all the binutils.
 154 BULIBS = bucomm.c version.c filemode.c
 155
 156 # Code shared by the ELF related programs.
 157 ELFLIBS = elfcomm.c
 158
 159 BFDLIB = ../bfd/libbfd.la
 160
 161 OPCODES = ../opcodes/libopcodes.la
 162
 163 LIBIBERTY = ../libiberty/libiberty.a
 164
 165 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
 166 po/POTFILES.in: @MAINT@ Makefile
 167         for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
 168           && mv tmp $(srcdir)/po/POTFILES.in
 169
 170 EXPECT = expect
 171 RUNTEST = runtest
 172
 173 CC_FOR_TARGET = ` \
 174   if [ -f $$r/../gcc/xgcc ] ; then \
 175     if [ -f $$r/../newlib/Makefile ] ; then \
 176       echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
 177     else \
 178       echo $$r/../gcc/xgcc -B$$r/../gcc/; \
 179     fi; \
 180   else \
 181     if [ "@host@" = "@target@" ] ; then \
 182       echo $(CC); \
 183     else \
 184       echo gcc | sed '$(transform)'; \
 185     fi; \
 186   fi`
 187
 188 check-DEJAGNU: site.exp
 189         srcdir=`cd $(srcdir) && pwd`; export srcdir; \
 190         r=`pwd`; export r; \
 191         LC_ALL=C; export LC_ALL; \
 192         EXPECT=$(EXPECT); export EXPECT; \
 193         runtest=$(RUNTEST); \
 194         if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
 195           CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
 196                 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
 197                         $(RUNTESTFLAGS); \
 198         else echo "WARNING: could not find \`runtest'" 1>&2; :;\
 199         fi
 200
 201 installcheck-local:
 202         /bin/sh $(srcdir)/sanity.sh $(bindir)
 203
 204 # There's no global DEPENDENCIES.  So, we must explicitly list everything
 205 # which depends on libintl, since we don't know whether LIBINTL_DEP will be
 206 # non-empty until configure time.  Ugh!
 207 size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 208 objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(OBJDUMP_PRIVATE_OFILES)
 209 nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 210 ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 211 strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 212 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 213 ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 214 cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 215 objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 216 nlmconv_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 217 srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 218 sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 219 coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 220 dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 221 windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 222 windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 223 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 224 readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 225 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
 226 dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 227 bfdtest1_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 228 bfdtest2_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 229
 230 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 231
 232 size_SOURCES = size.c $(BULIBS)
 233
 234 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 235
 236 strings_SOURCES = strings.c $(BULIBS)
 237
 238 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
 239 readelf_LDADD   = $(LIBINTL) $(LIBIBERTY) $(ZLIB)
 240
 241 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
 242 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
 243
 244 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 245
 246 nm_new_SOURCES = nm.c $(BULIBS)
 247
 248 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
 249 EXTRA_objdump_SOURCES = od-xcoff.c
 250 objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 251
 252 objdump.@OBJEXT@:objdump.c
 253 if am__fastdepCC
 254         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 255         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 256 else
 257 if AMDEP
 258         source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
 259         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 260 endif
 261         $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 262 endif
 263
 264 cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
 265
 266 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
 267         emul_$(EMULATION).c $(BULIBS)
 268 EXTRA_ar_SOURCES = $(CFILES)
 269 ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 270
 271 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
 272         binemul.c emul_$(EMULATION).c $(BULIBS)
 273 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 274
 275 addr2line_SOURCES = addr2line.c $(BULIBS)
 276
 277 # The following is commented out for the conversion to automake.
 278 # This rule creates a single binary that switches between ar and ranlib
 279 # by looking at argv[0].  Use this kludge to save some disk space.
 280 # However, you have to install things by hand.
 281 # (That is after 'make install', replace the installed ranlib by a link to ar.)
 282 # Alternatively, you can install ranlib.sh as ranlib.
 283 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
 284 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
 285 #       -rm -f $(RANLIB_PROG)
 286 #       -ln $(AR_PROG) $(RANLIB_PROG)
 287 #
 288 # objcopy and strip in one binary that uses argv[0] to decide its action.
 289 #
 290 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
 291 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
 292 #       -rm -f $(STRIP_PROG)
 293 #       -ln $(OBJCOPY_PROG) $(STRIP_PROG)
 294
 295 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 296         ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
 297         ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
 298         ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
 299
 300 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 301         ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
 302
 303 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 304         $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
 305
 306 syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
 307         $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
 308
 309 sysinfo.@OBJEXT@: sysinfo.c
 310         if [ -r sysinfo.c ]; then \
 311           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
 312         else \
 313           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
 314         fi
 315
 316 bin2c$(EXEEXT_FOR_BUILD): bin2c.c
 317         $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
 318
 319 embedspu: embedspu.sh Makefile
 320         awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
 321         chmod a+x $@
 322
 323 # We need these for parallel make.
 324 sysinfo.h: sysinfo.c
 325
 326 # Disable -Werror, if it has been enabled, since old versions of bison/
 327 # yacc will produce working code which contain compile time warnings.
 328 arparse.@OBJEXT@: arparse.c
 329 if am__fastdepCC
 330         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 331         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 332 else
 333 if AMDEP
 334         source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 335         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 336 endif
 337         $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 338 endif
 339
 340 arlex.@OBJEXT@: arlex.c
 341 if am__fastdepCC
 342         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 343         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 344 else
 345 if AMDEP
 346         source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 347         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 348 endif
 349         $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 350 endif
 351
 352 sysroff.@OBJEXT@: sysroff.c
 353 if am__fastdepCC
 354         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 355         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 356 else
 357 if AMDEP
 358         source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 359         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 360 endif
 361         $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 362 endif
 363
 364 defparse.@OBJEXT@: defparse.c
 365 if am__fastdepCC
 366         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 367         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 368 else
 369 if AMDEP
 370         source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 371         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 372 endif
 373         $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 374 endif
 375
 376 deflex.@OBJEXT@: deflex.c
 377 if am__fastdepCC
 378         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 379         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 380 else
 381 if AMDEP
 382         source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 383         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 384 endif
 385         $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 386 endif
 387
 388 nlmheader.@OBJEXT@: nlmheader.c
 389 if am__fastdepCC
 390         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 391         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 392 else
 393 if AMDEP
 394         source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@
 395         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 396 endif
 397         $(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 398 endif
 399
 400 rcparse.@OBJEXT@: rcparse.c
 401 if am__fastdepCC
 402         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 403         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 404 else
 405 if AMDEP
 406         source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 407         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 408 endif
 409         $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 410 endif
 411
 412 mcparse.@OBJEXT@: mcparse.c
 413 if am__fastdepCC
 414         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 415         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 416 else
 417 if AMDEP
 418         source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 419         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 420 endif
 421         $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 422 endif
 423
 424 rclex.@OBJEXT@: rclex.c
 425 if am__fastdepCC
 426         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
 427         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 428 else
 429 if AMDEP
 430         source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 431         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 432 endif
 433         $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
 434 endif
 435
 436 mclex.@OBJEXT@: mclex.c
 437 if am__fastdepCC
 438         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
 439         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 440 else
 441 if AMDEP
 442         source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 443         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 444 endif
 445         $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
 446 endif
 447
 448 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
 449 srconv.@OBJEXT@: sysroff.c
 450
 451 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
 452 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
 453
 454 dlltool.@OBJEXT@:
 455 if am__fastdepCC
 456         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 457         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 458 else
 459 if AMDEP
 460         source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
 461         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 462 endif
 463         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 464 endif
 465
 466 rescoff.@OBJEXT@:
 467 if am__fastdepCC
 468         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 469         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 470 else
 471 if AMDEP
 472         source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 473         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 474 endif
 475         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 476 endif
 477
 478 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
 479
 480 sysdump_SOURCES = sysdump.c $(BULIBS)
 481 sysdump.@OBJEXT@: sysroff.c
 482
 483 # coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
 484 # scripts, since they are only included conditionally.
 485 nlmconv.@OBJEXT@: nlmconv.c
 486 if am__fastdepCC
 487         ldname=`echo ld | sed '$(transform)'`; \
 488         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \
 489           -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 490         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 491 else
 492 if AMDEP
 493         source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@
 494         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 495 endif
 496         ldname=`echo ld | sed '$(transform)'`; \
 497         $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 498 endif
 499
 500 nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)
 501
 502 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
 503         winduni.c resres.c $(BULIBS)
 504 windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
 505
 506 windmc_SOURCES = windmc.c mcparse.y mclex.c \
 507         winduni.c $(BULIBS)
 508 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
 509
 510 dllwrap_SOURCES = dllwrap.c version.c
 511 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
 512
 513
 514 EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
 515         syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
 516         mcparse.h mcparse.c embedspu.sh
 517
 518 diststuff: $(EXTRA_DIST) info
 519 all: info
 520
 521 # development.sh is used to determine -Werror default.
 522 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh
 523
 524 DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak embedspu
 525
 526 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
 527   binutils.log binutils.sum abcdefgh*
 528 mostlyclean-local:
 529         -rm -rf tmpdir
 530
 531 .PHONY: install-exec-local
 532
 533 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
 534         @list='$(RENAMED_PROGS)'; for p in $$list; do \
 535           if test -f $$p$(EXEEXT); then \
 536             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
 537             $(INSTALL_PROGRAM_ENV) $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
 538           else :; fi; \
 539         done
 540         $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
 541         for i in $(TOOL_PROGS); do \
 542           if [ -f $$i$(EXEEXT) ]; then \
 543             j=`echo $$i | sed -e 's/-new//'`; \
 544             k=`echo $$j | sed '$(transform)'`; \
 545             if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
 546               rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 547               ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
 548                 || $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 549             fi; \
 550           else true; \
 551           fi; \
 552         done