binutils/Makefile.am

   1 ## Process this file with automake to generate Makefile.in
   2
   3 AUTOMAKE_OPTIONS = dejagnu no-dist foreign
   4 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
   5
   6 SUBDIRS = doc po
   7
   8 tooldir = $(exec_prefix)/$(target_alias)
   9
  10 ## These aren't set by automake, because they appear in
  11 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
  12 ## thus is not seen by automake.
  13 CC_FOR_BUILD = @CC_FOR_BUILD@
  14 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
  15
  16 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
  17 YFLAGS = -d
  18 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
  19
  20 # Automake 1.10+ disables lex and yacc output file regeneration if
  21 # maintainer mode is disabled.  Avoid this.
  22 am__skiplex =
  23 am__skipyacc =
  24
  25 WARN_CFLAGS = @WARN_CFLAGS@
  26 NO_WERROR = @NO_WERROR@
  27 AM_CFLAGS = $(WARN_CFLAGS)
  28 LIBICONV = @LIBICONV@
  29
  30 # these two are almost the same program
  31 AR_PROG=ar
  32 RANLIB_PROG=ranlib
  33
  34 # objcopy and strip should be the same program
  35 OBJCOPY_PROG=objcopy
  36 STRIP_PROG=strip-new
  37
  38 STRINGS_PROG=strings
  39
  40 READELF_PROG=readelf
  41
  42 # These should all be the same program too.
  43 SIZE_PROG=size
  44 NM_PROG=nm-new
  45 OBJDUMP_PROG=objdump
  46
  47 # This is the demangler, as a standalone program.
  48 # Note: This one is used as the installed name too, unlike the above.
  49 DEMANGLER_PROG=cxxfilt
  50
  51 ADDR2LINE_PROG=addr2line
  52
  53 NLMCONV_PROG=nlmconv
  54 DLLTOOL_PROG=dlltool
  55 WINDRES_PROG=windres
  56 WINDMC_PROG=windmc
  57 DLLWRAP_PROG=dllwrap
  58
  59 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
  60
  61 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) @BUILD_DLLWRAP@ @BUILD_INSTALL_MISC@
  62
  63 ## We need a special rule to install the programs which are built with
  64 ## -new, and to rename cxxfilt to c++filt.
  65 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
  66 noinst_PROGRAMS = $(RENAMED_PROGS) @BUILD_MISC@
  67
  68 EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
  69
  70 # Stuff that goes in tooldir/ if appropriate.
  71 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy
  72
  73 BASEDIR = $(srcdir)/..
  74 BFDDIR = $(BASEDIR)/bfd
  75 INCDIR  = $(BASEDIR)/include
  76
  77 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
  78          @HDEFINES@ \
  79          @INCINTL@ \
  80          -DLOCALEDIR="\"$(datadir)/locale\"" \
  81          -Dbin_dummy_emulation=$(EMULATION_VECTOR)
  82
  83 HFILES = \
  84         arsup.h binemul.h bucomm.h budbg.h \
  85         coffgrok.h debug.h dlltool.h dwarf.h nlmconv.h \
  86         sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
  87         windmc.h
  88
  89 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
  90 BUILT_SOURCES = $(GENERATED_HFILES)
  91
  92 CFILES = \
  93         addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
  94         coffdump.c coffgrok.c cxxfilt.c \
  95         dwarf.c debug.c dlltool.c dllwrap.c \
  96         emul_aix.c emul_vanilla.c filemode.c \
  97         ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
  98         nlmconv.c nm.c not-ranlib.c not-strip.c \
  99         objcopy.c objdump.c prdbg.c \
 100         rclex.c rdcoff.c rddbg.c readelf.c rename.c \
 101         resbin.c rescoff.c resrc.c resres.c \
 102         size.c srconv.c stabs.c strings.c sysdump.c \
 103         unwind-ia64.c version.c \
 104         windres.c winduni.c wrstabs.c \
 105         windmc.c mclex.c
 106
 107 GENERATED_CFILES = \
 108         arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
 109         defparse.c deflex.c nlmheader.c rcparse.c mcparse.c
 110
 111 DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
 112 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
 113
 114 # Code shared by all the binutils.
 115 BULIBS = bucomm.c version.c filemode.c
 116
 117 BFDLIB = ../bfd/libbfd.la
 118
 119 OPCODES = ../opcodes/libopcodes.la
 120
 121 LIBIBERTY = ../libiberty/libiberty.a
 122
 123 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
 124 po/POTFILES.in: @MAINT@ Makefile
 125         for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
 126           && mv tmp $(srcdir)/po/POTFILES.in
 127
 128 EXPECT = expect
 129 RUNTEST = runtest
 130
 131 CC_FOR_TARGET = ` \
 132   if [ -f $$r/../gcc/xgcc ] ; then \
 133     if [ -f $$r/../newlib/Makefile ] ; then \
 134       echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
 135     else \
 136       echo $$r/../gcc/xgcc -B$$r/../gcc/; \
 137     fi; \
 138   else \
 139     if [ "@host@" = "@target@" ] ; then \
 140       echo $(CC); \
 141     else \
 142       echo gcc | sed '$(transform)'; \
 143     fi; \
 144   fi`
 145
 146 check-DEJAGNU: site.exp
 147         srcdir=`cd $(srcdir) && pwd`; export srcdir; \
 148         r=`pwd`; export r; \
 149         EXPECT=$(EXPECT); export EXPECT; \
 150         runtest=$(RUNTEST); \
 151         if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
 152           CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
 153                 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
 154                         $(RUNTESTFLAGS); \
 155         else echo "WARNING: could not find \`runtest'" 1>&2; :;\
 156         fi
 157
 158 installcheck-local:
 159         /bin/sh $(srcdir)/sanity.sh $(bindir)
 160
 161 # There's no global DEPENDENCIES.  So, we must explicitly list everything
 162 # which depends on libintl, since we don't know whether LIBINTL_DEP will be
 163 # non-empty until configure time.  Ugh!
 164 size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 165 objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES)
 166 nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 167 ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 168 strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 169 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 170 ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 171 cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 172 objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 173 nlmconv_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 174 srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 175 sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 176 coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 177 dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 178 windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 179 windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 180 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 181 readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 182 dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 183
 184 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 185
 186 size_SOURCES = size.c $(BULIBS)
 187
 188 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 189
 190 strings_SOURCES = strings.c $(BULIBS)
 191
 192 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c
 193 readelf_LDADD   = $(LIBINTL) $(LIBIBERTY)
 194
 195 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 196
 197 nm_new_SOURCES = nm.c $(BULIBS)
 198
 199 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS)
 200 objdump_LDADD = $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 201
 202 objdump.o:objdump.c
 203 if am__fastdepCC
 204         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 205         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 206 else
 207 if AMDEP
 208         source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
 209         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 210 endif
 211         $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 212 endif
 213
 214 cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
 215
 216 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
 217         emul_$(EMULATION).c $(BULIBS)
 218 EXTRA_ar_SOURCES = $(CFILES)
 219 ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 220
 221 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
 222         binemul.c emul_$(EMULATION).c $(BULIBS)
 223 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 224
 225 addr2line_SOURCES = addr2line.c $(BULIBS)
 226
 227 # The following is commented out for the conversion to automake.
 228 # This rule creates a single binary that switches between ar and ranlib
 229 # by looking at argv[0].  Use this kludge to save some disk space.
 230 # However, you have to install things by hand.
 231 # (That is after 'make install', replace the installed ranlib by a link to ar.)
 232 # Alternatively, you can install ranlib.sh as ranlib.
 233 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
 234 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
 235 #       -rm -f $(RANLIB_PROG)
 236 #       -ln $(AR_PROG) $(RANLIB_PROG)
 237 #
 238 # objcopy and strip in one binary that uses argv[0] to decide its action.
 239 #
 240 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
 241 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
 242 #       -rm -f $(STRIP_PROG)
 243 #       -ln $(OBJCOPY_PROG) $(STRIP_PROG)
 244
 245 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 246         ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
 247         ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
 248         ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
 249
 250 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 251         ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
 252
 253 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.o syslex.o
 254         $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.o syslex.o
 255
 256 syslex.o: syslex.c sysinfo.h config.h
 257         if [ -r syslex.c ]; then \
 258           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) syslex.c -Wno-error ; \
 259         else \
 260           $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(srcdir)/syslex.c -Wno-error ;\
 261         fi
 262
 263 sysinfo.o: sysinfo.c
 264         if [ -r sysinfo.c ]; then \
 265           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) sysinfo.c -Wno-error ; \
 266         else \
 267           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(srcdir)/sysinfo.c -Wno-error ; \
 268         fi
 269
 270 bin2c$(EXEEXT_FOR_BUILD):
 271         $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c $(srcdir)/version.c
 272
 273 embedspu: embedspu.sh
 274         sed "s@^program_transform_name=@program_transform_name=$(program_transform_name)@" < $< > $@
 275         chmod a+x $@
 276
 277 # We need these for parallel make.
 278 sysinfo.h: sysinfo.c
 279
 280 # Disable -Werror, if it has been enabled, since old versions of bison/
 281 # yacc will produce working code which contain compile time warnings.
 282 arparse.o: arparse.c
 283 if am__fastdepCC
 284         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 285         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 286 else
 287 if AMDEP
 288         source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 289         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 290 endif
 291         $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 292 endif
 293
 294 arlex.o: arlex.c
 295 if am__fastdepCC
 296         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 297         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 298 else
 299 if AMDEP
 300         source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 301         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 302 endif
 303         $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 304 endif
 305
 306 sysroff.o: sysroff.c
 307 if am__fastdepCC
 308         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 309         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 310 else
 311 if AMDEP
 312         source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 313         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 314 endif
 315         $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 316 endif
 317
 318 defparse.o: defparse.c
 319 if am__fastdepCC
 320         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 321         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 322 else
 323 if AMDEP
 324         source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 325         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 326 endif
 327         $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 328 endif
 329
 330 deflex.o: deflex.c
 331 if am__fastdepCC
 332         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 333         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 334 else
 335 if AMDEP
 336         source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 337         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 338 endif
 339         $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 340 endif
 341
 342 nlmheader.o: nlmheader.c
 343 if am__fastdepCC
 344         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 345         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 346 else
 347 if AMDEP
 348         source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@
 349         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 350 endif
 351         $(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 352 endif
 353
 354 rcparse.o: rcparse.c
 355 if am__fastdepCC
 356         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 357         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 358 else
 359 if AMDEP
 360         source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 361         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 362 endif
 363         $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 364 endif
 365
 366 mcparse.o: mcparse.c
 367 if am__fastdepCC
 368         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 369         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 370 else
 371 if AMDEP
 372         source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 373         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 374 endif
 375         $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 376 endif
 377
 378 rclex.o: rclex.c
 379 if am__fastdepCC
 380         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
 381         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 382 else
 383 if AMDEP
 384         source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 385         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 386 endif
 387         $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
 388 endif
 389
 390 mclex.o: mclex.c
 391 if am__fastdepCC
 392         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
 393         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 394 else
 395 if AMDEP
 396         source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 397         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 398 endif
 399         $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
 400 endif
 401
 402 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
 403 srconv.o: sysroff.c
 404
 405 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
 406 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 407
 408 dlltool.o:
 409 if am__fastdepCC
 410         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 411         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 412 else
 413 if AMDEP
 414         source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
 415         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 416 endif
 417         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 418 endif
 419
 420 rescoff.o:
 421 if am__fastdepCC
 422         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 423         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 424 else
 425 if AMDEP
 426         source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 427         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 428 endif
 429         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 430 endif
 431
 432 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
 433
 434 sysdump_SOURCES = sysdump.c $(BULIBS)
 435 sysdump.o: sysroff.c
 436
 437 # coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
 438 # scripts, since they are only included conditionally.
 439 nlmconv.o: nlmconv.c
 440 if am__fastdepCC
 441         ldname=`echo ld | sed '$(transform)'`; \
 442         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \
 443           -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 444         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 445 else
 446 if AMDEP
 447         source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@
 448         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 449 endif
 450         ldname=`echo ld | sed '$(transform)'`; \
 451         $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 452 endif
 453
 454 nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)
 455
 456 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
 457         winduni.c resres.c $(BULIBS)
 458 windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 459
 460 windmc_SOURCES = windmc.c mcparse.y mclex.c \
 461         winduni.c $(BULIBS)
 462 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 463
 464 dllwrap_SOURCES = dllwrap.c version.c
 465 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
 466
 467
 468 EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
 469         syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
 470         mcparse.h mcparse.c
 471
 472 diststuff: $(EXTRA_DIST) info
 473 all: info
 474
 475 DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak
 476
 477 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
 478   binutils.log binutils.sum abcdefgh*
 479 mostlyclean-local:
 480         -rm -rf tmpdir
 481
 482 .PHONY: install-exec-local
 483
 484 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
 485         @list='$(RENAMED_PROGS)'; for p in $$list; do \
 486           if test -f $$p$(EXEEXT); then \
 487             echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
 488             $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
 489           else :; fi; \
 490         done
 491         $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
 492         for i in $(TOOL_PROGS); do \
 493           if [ -f $$i$(EXEEXT) ]; then \
 494             j=`echo $$i | sed -e 's/-new//'`; \
 495             k=`echo $$j | sed '$(transform)'`; \
 496             if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
 497               rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 498               ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
 499                 || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 500             fi; \
 501           else true; \
 502           fi; \
 503         done