binutils/Makefile.am

   1 ## Process this file with automake to generate Makefile.in
   2
   3 AUTOMAKE_OPTIONS = dejagnu no-dist foreign
   4 ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
   5
   6 SUBDIRS = doc po
   7
   8 tooldir = $(exec_prefix)/$(target_alias)
   9
  10 ## These aren't set by automake, because they appear in
  11 ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
  12 ## thus is not seen by automake.
  13 CC_FOR_BUILD = @CC_FOR_BUILD@
  14 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
  15
  16 YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
  17 YFLAGS = -d
  18 LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
  19
  20 # Automake 1.10+ disables lex and yacc output file regeneration if
  21 # maintainer mode is disabled.  Avoid this.
  22 am__skiplex =
  23 am__skipyacc =
  24
  25 WARN_CFLAGS = @WARN_CFLAGS@
  26 NO_WERROR = @NO_WERROR@
  27 AM_CFLAGS = $(WARN_CFLAGS)
  28 LIBICONV = @LIBICONV@
  29
  30 # these two are almost the same program
  31 AR_PROG=ar
  32 RANLIB_PROG=ranlib
  33
  34 # objcopy and strip should be the same program
  35 OBJCOPY_PROG=objcopy
  36 STRIP_PROG=strip-new
  37
  38 STRINGS_PROG=strings
  39
  40 READELF_PROG=readelf
  41
  42 ELFEDIT_PROG=elfedit
  43
  44 # These should all be the same program too.
  45 SIZE_PROG=size
  46 NM_PROG=nm-new
  47 OBJDUMP_PROG=objdump
  48
  49 # This is the demangler, as a standalone program.
  50 # Note: This one is used as the installed name too, unlike the above.
  51 DEMANGLER_PROG=cxxfilt
  52
  53 ADDR2LINE_PROG=addr2line
  54
  55 NLMCONV_PROG=nlmconv
  56 DLLTOOL_PROG=dlltool
  57 WINDRES_PROG=windres
  58 WINDMC_PROG=windmc
  59 DLLWRAP_PROG=dllwrap
  60
  61 SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
  62
  63 bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@
  64
  65 bin_SCRIPTS = @BUILD_INSTALL_MISC@
  66 EXTRA_SCRIPTS = embedspu
  67
  68 ## We need a special rule to install the programs which are built with
  69 ## -new, and to rename cxxfilt to c++filt.
  70 RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
  71 noinst_PROGRAMS = $(RENAMED_PROGS) @BUILD_MISC@
  72
  73 EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
  74
  75 # Stuff that goes in tooldir/ if appropriate.
  76 TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy
  77
  78 BASEDIR = $(srcdir)/..
  79 BFDDIR = $(BASEDIR)/bfd
  80 INCDIR  = $(BASEDIR)/include
  81
  82 AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
  83          @HDEFINES@ \
  84          @INCINTL@ \
  85          -DLOCALEDIR="\"$(datadir)/locale\"" \
  86          -Dbin_dummy_emulation=$(EMULATION_VECTOR)
  87
  88 HFILES = \
  89         arsup.h binemul.h bucomm.h budbg.h \
  90         coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h nlmconv.h \
  91         objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
  92         windmc.h
  93
  94 GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
  95 BUILT_SOURCES = $(GENERATED_HFILES)
  96
  97 CFILES = \
  98         addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
  99         coffdump.c coffgrok.c cxxfilt.c \
 100         dwarf.c debug.c dlltool.c dllwrap.c \
 101         elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
 102         ieee.c is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
 103         nlmconv.c nm.c not-ranlib.c not-strip.c \
 104         objcopy.c objdump.c prdbg.c \
 105         od-xcoff.c \
 106         rclex.c rdcoff.c rddbg.c readelf.c rename.c \
 107         resbin.c rescoff.c resrc.c resres.c \
 108         size.c srconv.c stabs.c strings.c sysdump.c \
 109         unwind-ia64.c elfedit.c version.c \
 110         windres.c winduni.c wrstabs.c \
 111         windmc.c mclex.c
 112
 113 GENERATED_CFILES = \
 114         arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
 115         defparse.c deflex.c nlmheader.c rcparse.c mcparse.c
 116
 117 DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
 118 WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
 119
 120 # Extra object files for objdump
 121 OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
 122
 123 # Code shared by all the binutils.
 124 BULIBS = bucomm.c version.c filemode.c
 125
 126 # Code shared by the ELF related programs.
 127 ELFLIBS = elfcomm.c
 128
 129 BFDLIB = ../bfd/libbfd.la
 130
 131 OPCODES = ../opcodes/libopcodes.la
 132
 133 LIBIBERTY = ../libiberty/libiberty.a
 134
 135 POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
 136 po/POTFILES.in: @MAINT@ Makefile
 137         for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
 138           && mv tmp $(srcdir)/po/POTFILES.in
 139
 140 EXPECT = expect
 141 RUNTEST = runtest
 142
 143 CC_FOR_TARGET = ` \
 144   if [ -f $$r/../gcc/xgcc ] ; then \
 145     if [ -f $$r/../newlib/Makefile ] ; then \
 146       echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
 147     else \
 148       echo $$r/../gcc/xgcc -B$$r/../gcc/; \
 149     fi; \
 150   else \
 151     if [ "@host@" = "@target@" ] ; then \
 152       echo $(CC); \
 153     else \
 154       echo gcc | sed '$(transform)'; \
 155     fi; \
 156   fi`
 157
 158 check-DEJAGNU: site.exp
 159         srcdir=`cd $(srcdir) && pwd`; export srcdir; \
 160         r=`pwd`; export r; \
 161         EXPECT=$(EXPECT); export EXPECT; \
 162         runtest=$(RUNTEST); \
 163         if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
 164           CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
 165                 $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
 166                         $(RUNTESTFLAGS); \
 167         else echo "WARNING: could not find \`runtest'" 1>&2; :;\
 168         fi
 169
 170 installcheck-local:
 171         /bin/sh $(srcdir)/sanity.sh $(bindir)
 172
 173 # There's no global DEPENDENCIES.  So, we must explicitly list everything
 174 # which depends on libintl, since we don't know whether LIBINTL_DEP will be
 175 # non-empty until configure time.  Ugh!
 176 size_DEPENDENCIES =      $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 177 objdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(OBJDUMP_PRIVATE_OFILES)
 178 nm_new_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 179 ar_DEPENDENCIES =        $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 180 strings_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 181 strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 182 ranlib_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 183 cxxfilt_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 184 objcopy_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 185 nlmconv_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 186 srconv_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 187 sysdump_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 188 coffdump_DEPENDENCIES =  $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 189 dlltool_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 190 windres_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 191 windmc_DEPENDENCIES =    $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 192 addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
 193 readelf_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 194 elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
 195 dllwrap_DEPENDENCIES =   $(LIBINTL_DEP) $(LIBIBERTY)
 196
 197 LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 198
 199 size_SOURCES = size.c $(BULIBS)
 200
 201 objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 202
 203 strings_SOURCES = strings.c $(BULIBS)
 204
 205 readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
 206 readelf_LDADD   = $(LIBINTL) $(LIBIBERTY)
 207
 208 elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
 209 elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
 210
 211 strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
 212
 213 nm_new_SOURCES = nm.c $(BULIBS)
 214
 215 objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
 216 EXTRA_objdump_SOURCES = od-xcoff.c
 217 objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
 218
 219 objdump.@OBJEXT@:objdump.c
 220 if am__fastdepCC
 221         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 222         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 223 else
 224 if AMDEP
 225         source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
 226         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 227 endif
 228         $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
 229 endif
 230
 231 cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
 232
 233 ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
 234         emul_$(EMULATION).c $(BULIBS)
 235 EXTRA_ar_SOURCES = $(CFILES)
 236 ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 237
 238 ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
 239         binemul.c emul_$(EMULATION).c $(BULIBS)
 240 ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 241
 242 addr2line_SOURCES = addr2line.c $(BULIBS)
 243
 244 # The following is commented out for the conversion to automake.
 245 # This rule creates a single binary that switches between ar and ranlib
 246 # by looking at argv[0].  Use this kludge to save some disk space.
 247 # However, you have to install things by hand.
 248 # (That is after 'make install', replace the installed ranlib by a link to ar.)
 249 # Alternatively, you can install ranlib.sh as ranlib.
 250 # ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
 251 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
 252 #       -rm -f $(RANLIB_PROG)
 253 #       -ln $(AR_PROG) $(RANLIB_PROG)
 254 #
 255 # objcopy and strip in one binary that uses argv[0] to decide its action.
 256 #
 257 #objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
 258 #       $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
 259 #       -rm -f $(STRIP_PROG)
 260 #       -ln $(OBJCOPY_PROG) $(STRIP_PROG)
 261
 262 sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 263         ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
 264         ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
 265         ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
 266
 267 sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
 268         ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
 269
 270 sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex.@OBJEXT@
 271         $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex.@OBJEXT@
 272
 273 syslex.@OBJEXT@: syslex.c sysinfo.h config.h
 274         if [ -r syslex.c ]; then \
 275           $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) syslex.c ; \
 276         else \
 277           $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex.c ;\
 278         fi
 279
 280 sysinfo.@OBJEXT@: sysinfo.c
 281         if [ -r sysinfo.c ]; then \
 282           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
 283         else \
 284           $(CC_FOR_BUILD) -c -I. $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
 285         fi
 286
 287 bin2c$(EXEEXT_FOR_BUILD): bin2c.c
 288         $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
 289
 290 embedspu: embedspu.sh Makefile
 291         awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
 292         chmod a+x $@
 293
 294 # We need these for parallel make.
 295 sysinfo.h: sysinfo.c
 296
 297 # Disable -Werror, if it has been enabled, since old versions of bison/
 298 # yacc will produce working code which contain compile time warnings.
 299 arparse.@OBJEXT@: arparse.c
 300 if am__fastdepCC
 301         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 302         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 303 else
 304 if AMDEP
 305         source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 306         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 307 endif
 308         $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
 309 endif
 310
 311 arlex.@OBJEXT@: arlex.c
 312 if am__fastdepCC
 313         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 314         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 315 else
 316 if AMDEP
 317         source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 318         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 319 endif
 320         $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
 321 endif
 322
 323 sysroff.@OBJEXT@: sysroff.c
 324 if am__fastdepCC
 325         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 326         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 327 else
 328 if AMDEP
 329         source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 330         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 331 endif
 332         $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
 333 endif
 334
 335 defparse.@OBJEXT@: defparse.c
 336 if am__fastdepCC
 337         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 338         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 339 else
 340 if AMDEP
 341         source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 342         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 343 endif
 344         $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
 345 endif
 346
 347 deflex.@OBJEXT@: deflex.c
 348 if am__fastdepCC
 349         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 350         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 351 else
 352 if AMDEP
 353         source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 354         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 355 endif
 356         $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
 357 endif
 358
 359 nlmheader.@OBJEXT@: nlmheader.c
 360 if am__fastdepCC
 361         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 362         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 363 else
 364 if AMDEP
 365         source='nlmheader.c' object='$@' libtool=no @AMDEPBACKSLASH@
 366         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 367 endif
 368         $(COMPILE) -c `test -f nlmheader.c || echo $(srcdir)/`nlmheader.c $(NO_WERROR)
 369 endif
 370
 371 rcparse.@OBJEXT@: rcparse.c
 372 if am__fastdepCC
 373         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 374         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 375 else
 376 if AMDEP
 377         source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 378         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 379 endif
 380         $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
 381 endif
 382
 383 mcparse.@OBJEXT@: mcparse.c
 384 if am__fastdepCC
 385         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 386         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 387 else
 388 if AMDEP
 389         source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
 390         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 391 endif
 392         $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
 393 endif
 394
 395 rclex.@OBJEXT@: rclex.c
 396 if am__fastdepCC
 397         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
 398         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 399 else
 400 if AMDEP
 401         source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 402         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 403 endif
 404         $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
 405 endif
 406
 407 mclex.@OBJEXT@: mclex.c
 408 if am__fastdepCC
 409         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
 410         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 411 else
 412 if AMDEP
 413         source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
 414         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 415 endif
 416         $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
 417 endif
 418
 419 srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
 420 srconv.@OBJEXT@: sysroff.c
 421
 422 dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
 423 dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL)
 424
 425 dlltool.@OBJEXT@:
 426 if am__fastdepCC
 427         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 428         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 429 else
 430 if AMDEP
 431         source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
 432         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 433 endif
 434         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
 435 endif
 436
 437 rescoff.@OBJEXT@:
 438 if am__fastdepCC
 439         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@  $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 440         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 441 else
 442 if AMDEP
 443         source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
 444         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 445 endif
 446         $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
 447 endif
 448
 449 coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
 450
 451 sysdump_SOURCES = sysdump.c $(BULIBS)
 452 sysdump.@OBJEXT@: sysroff.c
 453
 454 # coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
 455 # scripts, since they are only included conditionally.
 456 nlmconv.@OBJEXT@: nlmconv.c
 457 if am__fastdepCC
 458         ldname=`echo ld | sed '$(transform)'`; \
 459         $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ \
 460           -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 461         mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 462 else
 463 if AMDEP
 464         source='nlmconv.c' object='$@' libtool=no @AMDEPBACKSLASH@
 465         DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 466 endif
 467         ldname=`echo ld | sed '$(transform)'`; \
 468         $(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c
 469 endif
 470
 471 nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)
 472
 473 windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
 474         winduni.c resres.c $(BULIBS)
 475 windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 476
 477 windmc_SOURCES = windmc.c mcparse.y mclex.c \
 478         winduni.c $(BULIBS)
 479 windmc_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(LIBINTL) $(LIBICONV)
 480
 481 dllwrap_SOURCES = dllwrap.c version.c
 482 dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
 483
 484
 485 EXTRA_DIST = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
 486         syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
 487         mcparse.h mcparse.c embedspu.sh
 488
 489 diststuff: $(EXTRA_DIST) info
 490 all: info
 491
 492 # We extract version from bfd/configure.in, make sure to rerun configure
 493 # when BFD's version changes.
 494 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
 495
 496 DISTCLEANFILES = sysroff.c sysroff.h site.exp site.bak embedspu
 497
 498 MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
 499   binutils.log binutils.sum abcdefgh*
 500 mostlyclean-local:
 501         -rm -rf tmpdir
 502
 503 .PHONY: install-exec-local
 504
 505 install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
 506         @list='$(RENAMED_PROGS)'; for p in $$list; do \
 507           if test -f $$p$(EXEEXT); then \
 508             echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
 509             $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
 510           else :; fi; \
 511         done
 512         $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
 513         for i in $(TOOL_PROGS); do \
 514           if [ -f $$i$(EXEEXT) ]; then \
 515             j=`echo $$i | sed -e 's/-new//'`; \
 516             k=`echo $$j | sed '$(transform)'`; \
 517             if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
 518               rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 519               ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
 520                 || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
 521             fi; \
 522           else true; \
 523           fi; \
 524         done