1 /* objcopy.c -- copy object file from input to output, optionally massaging it.
2 Copyright 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
3 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
4 Free Software Foundation, Inc.
6 This file is part of GNU Binutils.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 3 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
27 #include "libiberty.h"
30 #include "filenames.h"
35 #include "coff/internal.h"
38 /* FIXME: See bfd/peXXigen.c for why we include an architecture specific
39 header in generic PE code. */
40 #include "coff/i386.h"
43 static bfd_vma pe_file_alignment
= (bfd_vma
) -1;
44 static bfd_vma pe_heap_commit
= (bfd_vma
) -1;
45 static bfd_vma pe_heap_reserve
= (bfd_vma
) -1;
46 static bfd_vma pe_image_base
= (bfd_vma
) -1;
47 static bfd_vma pe_section_alignment
= (bfd_vma
) -1;
48 static bfd_vma pe_stack_commit
= (bfd_vma
) -1;
49 static bfd_vma pe_stack_reserve
= (bfd_vma
) -1;
50 static short pe_subsystem
= -1;
51 static short pe_major_subsystem_version
= -1;
52 static short pe_minor_subsystem_version
= -1;
54 struct is_specified_symbol_predicate_data
60 /* A list to support redefine_sym. */
65 struct redefine_node
*next
;
68 typedef struct section_rename
70 const char * old_name
;
71 const char * new_name
;
73 struct section_rename
* next
;
77 /* List of sections to be renamed. */
78 static section_rename
*section_rename_list
;
80 static asymbol
**isympp
= NULL
; /* Input symbols. */
81 static asymbol
**osympp
= NULL
; /* Output symbols that survive stripping. */
83 /* If `copy_byte' >= 0, copy only that byte of every `interleave' bytes. */
84 static int copy_byte
= -1;
85 static int interleave
= 4;
87 static bfd_boolean verbose
; /* Print file and target names. */
88 static bfd_boolean preserve_dates
; /* Preserve input file timestamp. */
89 static int status
= 0; /* Exit status. */
94 STRIP_NONE
, /* Don't strip. */
95 STRIP_DEBUG
, /* Strip all debugger symbols. */
96 STRIP_UNNEEDED
, /* Strip unnecessary symbols. */
97 STRIP_NONDEBUG
, /* Strip everything but debug info. */
98 STRIP_ALL
/* Strip all symbols. */
101 /* Which symbols to remove. */
102 static enum strip_action strip_symbols
;
107 LOCALS_START_L
, /* Discard locals starting with L. */
108 LOCALS_ALL
/* Discard all locals. */
111 /* Which local symbols to remove. Overrides STRIP_ALL. */
112 static enum locals_action discard_locals
;
114 /* What kind of change to perform. */
122 /* Structure used to hold lists of sections and actions to take. */
125 struct section_list
* next
; /* Next section to change. */
126 const char * name
; /* Section name. */
127 bfd_boolean used
; /* Whether this entry was used. */
128 bfd_boolean remove
; /* Whether to remove this section. */
129 bfd_boolean copy
; /* Whether to copy this section. */
130 enum change_action change_vma
;/* Whether to change or set VMA. */
131 bfd_vma vma_val
; /* Amount to change by or set to. */
132 enum change_action change_lma
;/* Whether to change or set LMA. */
133 bfd_vma lma_val
; /* Amount to change by or set to. */
134 bfd_boolean set_flags
; /* Whether to set the section flags. */
135 flagword flags
; /* What to set the section flags to. */
138 static struct section_list
*change_sections
;
140 /* TRUE if some sections are to be removed. */
141 static bfd_boolean sections_removed
;
143 /* TRUE if only some sections are to be copied. */
144 static bfd_boolean sections_copied
;
146 /* Changes to the start address. */
147 static bfd_vma change_start
= 0;
148 static bfd_boolean set_start_set
= FALSE
;
149 static bfd_vma set_start
;
151 /* Changes to section addresses. */
152 static bfd_vma change_section_address
= 0;
154 /* Filling gaps between sections. */
155 static bfd_boolean gap_fill_set
= FALSE
;
156 static bfd_byte gap_fill
= 0;
158 /* Pad to a given address. */
159 static bfd_boolean pad_to_set
= FALSE
;
160 static bfd_vma pad_to
;
162 /* Use alternative machine code? */
163 static unsigned long use_alt_mach_code
= 0;
165 /* Output BFD flags user wants to set or clear */
166 static flagword bfd_flags_to_set
;
167 static flagword bfd_flags_to_clear
;
169 /* List of sections to add. */
172 /* Next section to add. */
173 struct section_add
*next
;
174 /* Name of section to add. */
176 /* Name of file holding section contents. */
177 const char *filename
;
180 /* Contents of file. */
182 /* BFD section, after it has been added. */
186 /* List of sections to add to the output BFD. */
187 static struct section_add
*add_sections
;
189 /* If non-NULL the argument to --add-gnu-debuglink.
190 This should be the filename to store in the .gnu_debuglink section. */
191 static const char * gnu_debuglink_filename
= NULL
;
193 /* Whether to convert debugging information. */
194 static bfd_boolean convert_debugging
= FALSE
;
196 /* Whether to change the leading character in symbol names. */
197 static bfd_boolean change_leading_char
= FALSE
;
199 /* Whether to remove the leading character from global symbol names. */
200 static bfd_boolean remove_leading_char
= FALSE
;
202 /* Whether to permit wildcard in symbol comparison. */
203 static bfd_boolean wildcard
= FALSE
;
205 /* True if --localize-hidden is in effect. */
206 static bfd_boolean localize_hidden
= FALSE
;
208 /* List of symbols to strip, keep, localize, keep-global, weaken,
210 static htab_t strip_specific_htab
= NULL
;
211 static htab_t strip_unneeded_htab
= NULL
;
212 static htab_t keep_specific_htab
= NULL
;
213 static htab_t localize_specific_htab
= NULL
;
214 static htab_t globalize_specific_htab
= NULL
;
215 static htab_t keepglobal_specific_htab
= NULL
;
216 static htab_t weaken_specific_htab
= NULL
;
217 static struct redefine_node
*redefine_sym_list
= NULL
;
219 /* If this is TRUE, we weaken global symbols (set BSF_WEAK). */
220 static bfd_boolean weaken
= FALSE
;
222 /* If this is TRUE, we retain BSF_FILE symbols. */
223 static bfd_boolean keep_file_symbols
= FALSE
;
225 /* Prefix symbols/sections. */
226 static char *prefix_symbols_string
= 0;
227 static char *prefix_sections_string
= 0;
228 static char *prefix_alloc_sections_string
= 0;
230 /* True if --extract-symbol was passed on the command line. */
231 static bfd_boolean extract_symbol
= FALSE
;
233 /* If `reverse_bytes' is nonzero, then reverse the order of every chunk
234 of <reverse_bytes> bytes within each output section. */
235 static int reverse_bytes
= 0;
237 /* For Coff objects, we may want to allow or disallow long section names,
238 or preserve them where found in the inputs. Debug info relies on them. */
239 enum long_section_name_handling
246 /* The default long section handling mode is to preserve them.
247 This is also the only behaviour for 'strip'. */
248 static enum long_section_name_handling long_section_names
= KEEP
;
250 /* 150 isn't special; it's just an arbitrary non-ASCII char value. */
251 enum command_line_switch
253 OPTION_ADD_SECTION
=150,
254 OPTION_CHANGE_ADDRESSES
,
255 OPTION_CHANGE_LEADING_CHAR
,
257 OPTION_CHANGE_SECTION_ADDRESS
,
258 OPTION_CHANGE_SECTION_LMA
,
259 OPTION_CHANGE_SECTION_VMA
,
260 OPTION_CHANGE_WARNINGS
,
263 OPTION_NO_CHANGE_WARNINGS
,
265 OPTION_REMOVE_LEADING_CHAR
,
266 OPTION_SET_SECTION_FLAGS
,
268 OPTION_STRIP_UNNEEDED
,
271 OPTION_REDEFINE_SYMS
,
274 OPTION_STRIP_SYMBOLS
,
275 OPTION_STRIP_UNNEEDED_SYMBOL
,
276 OPTION_STRIP_UNNEEDED_SYMBOLS
,
278 OPTION_LOCALIZE_HIDDEN
,
279 OPTION_LOCALIZE_SYMBOLS
,
280 OPTION_LONG_SECTION_NAMES
,
281 OPTION_GLOBALIZE_SYMBOL
,
282 OPTION_GLOBALIZE_SYMBOLS
,
283 OPTION_KEEPGLOBAL_SYMBOLS
,
284 OPTION_WEAKEN_SYMBOLS
,
285 OPTION_RENAME_SECTION
,
286 OPTION_ALT_MACH_CODE
,
287 OPTION_PREFIX_SYMBOLS
,
288 OPTION_PREFIX_SECTIONS
,
289 OPTION_PREFIX_ALLOC_SECTIONS
,
291 OPTION_ADD_GNU_DEBUGLINK
,
292 OPTION_ONLY_KEEP_DEBUG
,
293 OPTION_KEEP_FILE_SYMBOLS
,
294 OPTION_READONLY_TEXT
,
295 OPTION_WRITABLE_TEXT
,
298 OPTION_EXTRACT_SYMBOL
,
299 OPTION_REVERSE_BYTES
,
300 OPTION_FILE_ALIGNMENT
,
303 OPTION_SECTION_ALIGNMENT
,
308 /* Options to handle if running as "strip". */
310 static struct option strip_options
[] =
312 {"discard-all", no_argument
, 0, 'x'},
313 {"discard-locals", no_argument
, 0, 'X'},
314 {"format", required_argument
, 0, 'F'}, /* Obsolete */
315 {"help", no_argument
, 0, 'h'},
316 {"info", no_argument
, 0, OPTION_FORMATS_INFO
},
317 {"input-format", required_argument
, 0, 'I'}, /* Obsolete */
318 {"input-target", required_argument
, 0, 'I'},
319 {"keep-file-symbols", no_argument
, 0, OPTION_KEEP_FILE_SYMBOLS
},
320 {"keep-symbol", required_argument
, 0, 'K'},
321 {"only-keep-debug", no_argument
, 0, OPTION_ONLY_KEEP_DEBUG
},
322 {"output-format", required_argument
, 0, 'O'}, /* Obsolete */
323 {"output-target", required_argument
, 0, 'O'},
324 {"output-file", required_argument
, 0, 'o'},
325 {"preserve-dates", no_argument
, 0, 'p'},
326 {"remove-section", required_argument
, 0, 'R'},
327 {"strip-all", no_argument
, 0, 's'},
328 {"strip-debug", no_argument
, 0, 'S'},
329 {"strip-unneeded", no_argument
, 0, OPTION_STRIP_UNNEEDED
},
330 {"strip-symbol", required_argument
, 0, 'N'},
331 {"target", required_argument
, 0, 'F'},
332 {"verbose", no_argument
, 0, 'v'},
333 {"version", no_argument
, 0, 'V'},
334 {"wildcard", no_argument
, 0, 'w'},
335 {0, no_argument
, 0, 0}
338 /* Options to handle if running as "objcopy". */
340 static struct option copy_options
[] =
342 {"add-gnu-debuglink", required_argument
, 0, OPTION_ADD_GNU_DEBUGLINK
},
343 {"add-section", required_argument
, 0, OPTION_ADD_SECTION
},
344 {"adjust-start", required_argument
, 0, OPTION_CHANGE_START
},
345 {"adjust-vma", required_argument
, 0, OPTION_CHANGE_ADDRESSES
},
346 {"adjust-section-vma", required_argument
, 0, OPTION_CHANGE_SECTION_ADDRESS
},
347 {"adjust-warnings", no_argument
, 0, OPTION_CHANGE_WARNINGS
},
348 {"alt-machine-code", required_argument
, 0, OPTION_ALT_MACH_CODE
},
349 {"binary-architecture", required_argument
, 0, 'B'},
350 {"byte", required_argument
, 0, 'b'},
351 {"change-addresses", required_argument
, 0, OPTION_CHANGE_ADDRESSES
},
352 {"change-leading-char", no_argument
, 0, OPTION_CHANGE_LEADING_CHAR
},
353 {"change-section-address", required_argument
, 0, OPTION_CHANGE_SECTION_ADDRESS
},
354 {"change-section-lma", required_argument
, 0, OPTION_CHANGE_SECTION_LMA
},
355 {"change-section-vma", required_argument
, 0, OPTION_CHANGE_SECTION_VMA
},
356 {"change-start", required_argument
, 0, OPTION_CHANGE_START
},
357 {"change-warnings", no_argument
, 0, OPTION_CHANGE_WARNINGS
},
358 {"debugging", no_argument
, 0, OPTION_DEBUGGING
},
359 {"discard-all", no_argument
, 0, 'x'},
360 {"discard-locals", no_argument
, 0, 'X'},
361 {"extract-symbol", no_argument
, 0, OPTION_EXTRACT_SYMBOL
},
362 {"format", required_argument
, 0, 'F'}, /* Obsolete */
363 {"gap-fill", required_argument
, 0, OPTION_GAP_FILL
},
364 {"globalize-symbol", required_argument
, 0, OPTION_GLOBALIZE_SYMBOL
},
365 {"globalize-symbols", required_argument
, 0, OPTION_GLOBALIZE_SYMBOLS
},
366 {"help", no_argument
, 0, 'h'},
367 {"impure", no_argument
, 0, OPTION_IMPURE
},
368 {"info", no_argument
, 0, OPTION_FORMATS_INFO
},
369 {"input-format", required_argument
, 0, 'I'}, /* Obsolete */
370 {"input-target", required_argument
, 0, 'I'},
371 {"interleave", required_argument
, 0, 'i'},
372 {"keep-file-symbols", no_argument
, 0, OPTION_KEEP_FILE_SYMBOLS
},
373 {"keep-global-symbol", required_argument
, 0, 'G'},
374 {"keep-global-symbols", required_argument
, 0, OPTION_KEEPGLOBAL_SYMBOLS
},
375 {"keep-symbol", required_argument
, 0, 'K'},
376 {"keep-symbols", required_argument
, 0, OPTION_KEEP_SYMBOLS
},
377 {"localize-hidden", no_argument
, 0, OPTION_LOCALIZE_HIDDEN
},
378 {"localize-symbol", required_argument
, 0, 'L'},
379 {"localize-symbols", required_argument
, 0, OPTION_LOCALIZE_SYMBOLS
},
380 {"long-section-names", required_argument
, 0, OPTION_LONG_SECTION_NAMES
},
381 {"no-adjust-warnings", no_argument
, 0, OPTION_NO_CHANGE_WARNINGS
},
382 {"no-change-warnings", no_argument
, 0, OPTION_NO_CHANGE_WARNINGS
},
383 {"only-keep-debug", no_argument
, 0, OPTION_ONLY_KEEP_DEBUG
},
384 {"only-section", required_argument
, 0, 'j'},
385 {"output-format", required_argument
, 0, 'O'}, /* Obsolete */
386 {"output-target", required_argument
, 0, 'O'},
387 {"pad-to", required_argument
, 0, OPTION_PAD_TO
},
388 {"prefix-symbols", required_argument
, 0, OPTION_PREFIX_SYMBOLS
},
389 {"prefix-sections", required_argument
, 0, OPTION_PREFIX_SECTIONS
},
390 {"prefix-alloc-sections", required_argument
, 0, OPTION_PREFIX_ALLOC_SECTIONS
},
391 {"preserve-dates", no_argument
, 0, 'p'},
392 {"pure", no_argument
, 0, OPTION_PURE
},
393 {"readonly-text", no_argument
, 0, OPTION_READONLY_TEXT
},
394 {"redefine-sym", required_argument
, 0, OPTION_REDEFINE_SYM
},
395 {"redefine-syms", required_argument
, 0, OPTION_REDEFINE_SYMS
},
396 {"remove-leading-char", no_argument
, 0, OPTION_REMOVE_LEADING_CHAR
},
397 {"remove-section", required_argument
, 0, 'R'},
398 {"rename-section", required_argument
, 0, OPTION_RENAME_SECTION
},
399 {"reverse-bytes", required_argument
, 0, OPTION_REVERSE_BYTES
},
400 {"set-section-flags", required_argument
, 0, OPTION_SET_SECTION_FLAGS
},
401 {"set-start", required_argument
, 0, OPTION_SET_START
},
402 {"srec-len", required_argument
, 0, OPTION_SREC_LEN
},
403 {"srec-forceS3", no_argument
, 0, OPTION_SREC_FORCES3
},
404 {"strip-all", no_argument
, 0, 'S'},
405 {"strip-debug", no_argument
, 0, 'g'},
406 {"strip-unneeded", no_argument
, 0, OPTION_STRIP_UNNEEDED
},
407 {"strip-unneeded-symbol", required_argument
, 0, OPTION_STRIP_UNNEEDED_SYMBOL
},
408 {"strip-unneeded-symbols", required_argument
, 0, OPTION_STRIP_UNNEEDED_SYMBOLS
},
409 {"strip-symbol", required_argument
, 0, 'N'},
410 {"strip-symbols", required_argument
, 0, OPTION_STRIP_SYMBOLS
},
411 {"target", required_argument
, 0, 'F'},
412 {"verbose", no_argument
, 0, 'v'},
413 {"version", no_argument
, 0, 'V'},
414 {"weaken", no_argument
, 0, OPTION_WEAKEN
},
415 {"weaken-symbol", required_argument
, 0, 'W'},
416 {"weaken-symbols", required_argument
, 0, OPTION_WEAKEN_SYMBOLS
},
417 {"wildcard", no_argument
, 0, 'w'},
418 {"writable-text", no_argument
, 0, OPTION_WRITABLE_TEXT
},
419 {"file-alignment", required_argument
, 0, OPTION_FILE_ALIGNMENT
},
420 {"heap", required_argument
, 0, OPTION_HEAP
},
421 {"image-base", required_argument
, 0 , OPTION_IMAGE_BASE
},
422 {"section-alignment", required_argument
, 0, OPTION_SECTION_ALIGNMENT
},
423 {"stack", required_argument
, 0, OPTION_STACK
},
424 {"subsystem", required_argument
, 0, OPTION_SUBSYSTEM
},
425 {0, no_argument
, 0, 0}
429 extern char *program_name
;
431 /* This flag distinguishes between strip and objcopy:
432 1 means this is 'strip'; 0 means this is 'objcopy'.
433 -1 means if we should use argv[0] to decide. */
436 /* The maximum length of an S record. This variable is declared in srec.c
437 and can be modified by the --srec-len parameter. */
438 extern unsigned int Chunk
;
440 /* Restrict the generation of Srecords to type S3 only.
441 This variable is declare in bfd/srec.c and can be toggled
442 on by the --srec-forceS3 command line switch. */
443 extern bfd_boolean S3Forced
;
445 /* Defined in bfd/binary.c. Used to set architecture and machine of input
447 extern enum bfd_architecture bfd_external_binary_architecture
;
448 extern unsigned long bfd_external_machine
;
450 /* Forward declarations. */
451 static void setup_section (bfd
*, asection
*, void *);
452 static void setup_bfd_headers (bfd
*, bfd
*);
453 static void copy_section (bfd
*, asection
*, void *);
454 static void get_sections (bfd
*, asection
*, void *);
455 static int compare_section_lma (const void *, const void *);
456 static void mark_symbols_used_in_relocations (bfd
*, asection
*, void *);
457 static bfd_boolean
write_debugging_info (bfd
*, void *, long *, asymbol
***);
458 static const char *lookup_sym_redefinition (const char *);
461 copy_usage (FILE *stream
, int exit_status
)
463 fprintf (stream
, _("Usage: %s [option(s)] in-file [out-file]\n"), program_name
);
464 fprintf (stream
, _(" Copies a binary file, possibly transforming it in the process\n"));
465 fprintf (stream
, _(" The options are:\n"));
466 fprintf (stream
, _("\
467 -I --input-target <bfdname> Assume input file is in format <bfdname>\n\
468 -O --output-target <bfdname> Create an output file in format <bfdname>\n\
469 -B --binary-architecture <arch> Set arch of output file, when input is binary\n\
470 -F --target <bfdname> Set both input and output format to <bfdname>\n\
471 --debugging Convert debugging information, if possible\n\
472 -p --preserve-dates Copy modified/access timestamps to the output\n\
473 -j --only-section <name> Only copy section <name> into the output\n\
474 --add-gnu-debuglink=<file> Add section .gnu_debuglink linking to <file>\n\
475 -R --remove-section <name> Remove section <name> from the output\n\
476 -S --strip-all Remove all symbol and relocation information\n\
477 -g --strip-debug Remove all debugging symbols & sections\n\
478 --strip-unneeded Remove all symbols not needed by relocations\n\
479 -N --strip-symbol <name> Do not copy symbol <name>\n\
480 --strip-unneeded-symbol <name>\n\
481 Do not copy symbol <name> unless needed by\n\
483 --only-keep-debug Strip everything but the debug information\n\
484 --extract-symbol Remove section contents but keep symbols\n\
485 -K --keep-symbol <name> Do not strip symbol <name>\n\
486 --keep-file-symbols Do not strip file symbol(s)\n\
487 --localize-hidden Turn all ELF hidden symbols into locals\n\
488 -L --localize-symbol <name> Force symbol <name> to be marked as a local\n\
489 --globalize-symbol <name> Force symbol <name> to be marked as a global\n\
490 -G --keep-global-symbol <name> Localize all symbols except <name>\n\
491 -W --weaken-symbol <name> Force symbol <name> to be marked as a weak\n\
492 --weaken Force all global symbols to be marked as weak\n\
493 -w --wildcard Permit wildcard in symbol comparison\n\
494 -x --discard-all Remove all non-global symbols\n\
495 -X --discard-locals Remove any compiler-generated symbols\n\
496 -i --interleave <number> Only copy one out of every <number> bytes\n\
497 -b --byte <num> Select byte <num> in every interleaved block\n\
498 --gap-fill <val> Fill gaps between sections with <val>\n\
499 --pad-to <addr> Pad the last section up to address <addr>\n\
500 --set-start <addr> Set the start address to <addr>\n\
501 {--change-start|--adjust-start} <incr>\n\
502 Add <incr> to the start address\n\
503 {--change-addresses|--adjust-vma} <incr>\n\
504 Add <incr> to LMA, VMA and start addresses\n\
505 {--change-section-address|--adjust-section-vma} <name>{=|+|-}<val>\n\
506 Change LMA and VMA of section <name> by <val>\n\
507 --change-section-lma <name>{=|+|-}<val>\n\
508 Change the LMA of section <name> by <val>\n\
509 --change-section-vma <name>{=|+|-}<val>\n\
510 Change the VMA of section <name> by <val>\n\
511 {--[no-]change-warnings|--[no-]adjust-warnings}\n\
512 Warn if a named section does not exist\n\
513 --set-section-flags <name>=<flags>\n\
514 Set section <name>'s properties to <flags>\n\
515 --add-section <name>=<file> Add section <name> found in <file> to output\n\
516 --rename-section <old>=<new>[,<flags>] Rename section <old> to <new>\n\
517 --long-section-names {enable|disable|keep}\n\
518 Handle long section names in Coff objects.\n\
519 --change-leading-char Force output format's leading character style\n\
520 --remove-leading-char Remove leading character from global symbols\n\
521 --reverse-bytes=<num> Reverse <num> bytes at a time, in output sections with content\n\
522 --redefine-sym <old>=<new> Redefine symbol name <old> to <new>\n\
523 --redefine-syms <file> --redefine-sym for all symbol pairs \n\
525 --srec-len <number> Restrict the length of generated Srecords\n\
526 --srec-forceS3 Restrict the type of generated Srecords to S3\n\
527 --strip-symbols <file> -N for all symbols listed in <file>\n\
528 --strip-unneeded-symbols <file>\n\
529 --strip-unneeded-symbol for all symbols listed\n\
531 --keep-symbols <file> -K for all symbols listed in <file>\n\
532 --localize-symbols <file> -L for all symbols listed in <file>\n\
533 --globalize-symbols <file> --globalize-symbol for all in <file>\n\
534 --keep-global-symbols <file> -G for all symbols listed in <file>\n\
535 --weaken-symbols <file> -W for all symbols listed in <file>\n\
536 --alt-machine-code <index> Use the target's <index>'th alternative machine\n\
537 --writable-text Mark the output text as writable\n\
538 --readonly-text Make the output text write protected\n\
539 --pure Mark the output file as demand paged\n\
540 --impure Mark the output file as impure\n\
541 --prefix-symbols <prefix> Add <prefix> to start of every symbol name\n\
542 --prefix-sections <prefix> Add <prefix> to start of every section name\n\
543 --prefix-alloc-sections <prefix>\n\
544 Add <prefix> to start of every allocatable\n\
546 --file-alignment <num> Set PE file alignment to <num>\n\
547 --heap <reserve>[,<commit>] Set PE reserve/commit heap to <reserve>/\n\
549 --image-base <address> Set PE image base to <address>\n\
550 --section-alignment <num> Set PE section alignment to <num>\n\
551 --stack <reserve>[,<commit>] Set PE reserve/commit stack to <reserve>/\n\
553 --subsystem <name>[:<version>]\n\
554 Set PE subsystem to <name> [& <version>]\n]\
555 -v --verbose List all object files modified\n\
556 @<file> Read options from <file>\n\
557 -V --version Display this program's version number\n\
558 -h --help Display this output\n\
559 --info List object formats & architectures supported\n\
561 list_supported_targets (program_name
, stream
);
562 if (REPORT_BUGS_TO
[0] && exit_status
== 0)
563 fprintf (stream
, _("Report bugs to %s\n"), REPORT_BUGS_TO
);
568 strip_usage (FILE *stream
, int exit_status
)
570 fprintf (stream
, _("Usage: %s <option(s)> in-file(s)\n"), program_name
);
571 fprintf (stream
, _(" Removes symbols and sections from files\n"));
572 fprintf (stream
, _(" The options are:\n"));
573 fprintf (stream
, _("\
574 -I --input-target=<bfdname> Assume input file is in format <bfdname>\n\
575 -O --output-target=<bfdname> Create an output file in format <bfdname>\n\
576 -F --target=<bfdname> Set both input and output format to <bfdname>\n\
577 -p --preserve-dates Copy modified/access timestamps to the output\n\
578 -R --remove-section=<name> Remove section <name> from the output\n\
579 -s --strip-all Remove all symbol and relocation information\n\
580 -g -S -d --strip-debug Remove all debugging symbols & sections\n\
581 --strip-unneeded Remove all symbols not needed by relocations\n\
582 --only-keep-debug Strip everything but the debug information\n\
583 -N --strip-symbol=<name> Do not copy symbol <name>\n\
584 -K --keep-symbol=<name> Do not strip symbol <name>\n\
585 --keep-file-symbols Do not strip file symbol(s)\n\
586 -w --wildcard Permit wildcard in symbol comparison\n\
587 -x --discard-all Remove all non-global symbols\n\
588 -X --discard-locals Remove any compiler-generated symbols\n\
589 -v --verbose List all object files modified\n\
590 -V --version Display this program's version number\n\
591 -h --help Display this output\n\
592 --info List object formats & architectures supported\n\
593 -o <file> Place stripped output into <file>\n\
596 list_supported_targets (program_name
, stream
);
597 if (REPORT_BUGS_TO
[0] && exit_status
== 0)
598 fprintf (stream
, _("Report bugs to %s\n"), REPORT_BUGS_TO
);
602 /* Parse section flags into a flagword, with a fatal error if the
603 string can't be parsed. */
606 parse_flags (const char *s
)
616 snext
= strchr (s
, ',');
626 #define PARSE_FLAG(fname,fval) \
627 else if (strncasecmp (fname, s, len) == 0) ret |= fval
628 PARSE_FLAG ("alloc", SEC_ALLOC
);
629 PARSE_FLAG ("load", SEC_LOAD
);
630 PARSE_FLAG ("noload", SEC_NEVER_LOAD
);
631 PARSE_FLAG ("readonly", SEC_READONLY
);
632 PARSE_FLAG ("debug", SEC_DEBUGGING
);
633 PARSE_FLAG ("code", SEC_CODE
);
634 PARSE_FLAG ("data", SEC_DATA
);
635 PARSE_FLAG ("rom", SEC_ROM
);
636 PARSE_FLAG ("share", SEC_COFF_SHARED
);
637 PARSE_FLAG ("contents", SEC_HAS_CONTENTS
);
643 copy
= xmalloc (len
+ 1);
644 strncpy (copy
, s
, len
);
646 non_fatal (_("unrecognized section flag `%s'"), copy
);
647 fatal (_("supported flags: %s"),
648 "alloc, load, noload, readonly, debug, code, data, rom, share, contents");
658 /* Find and optionally add an entry in the change_sections list. */
660 static struct section_list
*
661 find_section_list (const char *name
, bfd_boolean add
)
663 struct section_list
*p
;
665 for (p
= change_sections
; p
!= NULL
; p
= p
->next
)
666 if (strcmp (p
->name
, name
) == 0)
672 p
= xmalloc (sizeof (struct section_list
));
677 p
->change_vma
= CHANGE_IGNORE
;
678 p
->change_lma
= CHANGE_IGNORE
;
681 p
->set_flags
= FALSE
;
684 p
->next
= change_sections
;
690 /* There is htab_hash_string but no htab_eq_string. Makes sense. */
693 eq_string (const void *s1
, const void *s2
)
695 return strcmp (s1
, s2
) == 0;
699 create_symbol_htab (void)
701 return htab_create_alloc (16, htab_hash_string
, eq_string
, NULL
, xcalloc
, free
);
705 create_symbol_htabs (void)
707 strip_specific_htab
= create_symbol_htab ();
708 strip_unneeded_htab
= create_symbol_htab ();
709 keep_specific_htab
= create_symbol_htab ();
710 localize_specific_htab
= create_symbol_htab ();
711 globalize_specific_htab
= create_symbol_htab ();
712 keepglobal_specific_htab
= create_symbol_htab ();
713 weaken_specific_htab
= create_symbol_htab ();
716 /* Add a symbol to strip_specific_list. */
719 add_specific_symbol (const char *name
, htab_t htab
)
721 *htab_find_slot (htab
, name
, INSERT
) = (char *) name
;
724 /* Add symbols listed in `filename' to strip_specific_list. */
726 #define IS_WHITESPACE(c) ((c) == ' ' || (c) == '\t')
727 #define IS_LINE_TERMINATOR(c) ((c) == '\n' || (c) == '\r' || (c) == '\0')
730 add_specific_symbols (const char *filename
, htab_t htab
)
736 unsigned int line_count
;
738 size
= get_file_size (filename
);
745 buffer
= xmalloc (size
+ 2);
746 f
= fopen (filename
, FOPEN_RT
);
748 fatal (_("cannot open '%s': %s"), filename
, strerror (errno
));
750 if (fread (buffer
, 1, size
, f
) == 0 || ferror (f
))
751 fatal (_("%s: fread failed"), filename
);
754 buffer
[size
] = '\n';
755 buffer
[size
+ 1] = '\0';
759 for (line
= buffer
; * line
!= '\0'; line
++)
764 int finished
= FALSE
;
766 for (eol
= line
;; eol
++)
772 /* Cope with \n\r. */
780 /* Cope with \r\n. */
791 /* Line comment, Terminate the line here, in case a
792 name is present and then allow the rest of the
793 loop to find the real end of the line. */
805 /* A name may now exist somewhere between 'line' and 'eol'.
806 Strip off leading whitespace and trailing whitespace,
807 then add it to the list. */
808 for (name
= line
; IS_WHITESPACE (* name
); name
++)
810 for (name_end
= name
;
811 (! IS_WHITESPACE (* name_end
))
812 && (! IS_LINE_TERMINATOR (* name_end
));
816 if (! IS_LINE_TERMINATOR (* name_end
))
820 for (extra
= name_end
+ 1; IS_WHITESPACE (* extra
); extra
++)
823 if (! IS_LINE_TERMINATOR (* extra
))
824 non_fatal (_("%s:%d: Ignoring rubbish found on this line"),
825 filename
, line_count
);
831 add_specific_symbol (name
, htab
);
833 /* Advance line pointer to end of line. The 'eol ++' in the for
834 loop above will then advance us to the start of the next line. */
840 /* See whether a symbol should be stripped or kept
841 based on strip_specific_list and keep_symbols. */
844 is_specified_symbol_predicate (void **slot
, void *data
)
846 struct is_specified_symbol_predicate_data
*d
= data
;
847 const char *slot_name
= *slot
;
849 if (*slot_name
!= '!')
851 if (! fnmatch (slot_name
, d
->name
, 0))
854 /* Stop traversal. */
860 if (fnmatch (slot_name
+ 1, d
->name
, 0))
863 /* Stop traversal. */
868 /* Continue traversal. */
873 is_specified_symbol (const char *name
, htab_t htab
)
877 struct is_specified_symbol_predicate_data data
;
882 htab_traverse (htab
, is_specified_symbol_predicate
, &data
);
887 return htab_find (htab
, name
) != NULL
;
890 /* Return a pointer to the symbol used as a signature for GROUP. */
893 group_signature (asection
*group
)
895 bfd
*abfd
= group
->owner
;
896 Elf_Internal_Shdr
*ghdr
;
898 if (bfd_get_flavour (abfd
) != bfd_target_elf_flavour
)
901 ghdr
= &elf_section_data (group
)->this_hdr
;
902 if (ghdr
->sh_link
< elf_numsections (abfd
))
904 const struct elf_backend_data
*bed
= get_elf_backend_data (abfd
);
905 Elf_Internal_Shdr
*symhdr
= elf_elfsections (abfd
) [ghdr
->sh_link
];
907 if (symhdr
->sh_type
== SHT_SYMTAB
908 && ghdr
->sh_info
< symhdr
->sh_size
/ bed
->s
->sizeof_sym
)
909 return isympp
[ghdr
->sh_info
- 1];
914 /* See if a section is being removed. */
917 is_strip_section (bfd
*abfd ATTRIBUTE_UNUSED
, asection
*sec
)
919 if (sections_removed
|| sections_copied
)
921 struct section_list
*p
;
923 p
= find_section_list (bfd_get_section_name (abfd
, sec
), FALSE
);
925 if (sections_removed
&& p
!= NULL
&& p
->remove
)
927 if (sections_copied
&& (p
== NULL
|| ! p
->copy
))
931 if ((bfd_get_section_flags (abfd
, sec
) & SEC_DEBUGGING
) != 0)
933 if (strip_symbols
== STRIP_DEBUG
934 || strip_symbols
== STRIP_UNNEEDED
935 || strip_symbols
== STRIP_ALL
936 || discard_locals
== LOCALS_ALL
937 || convert_debugging
)
940 if (strip_symbols
== STRIP_NONDEBUG
)
944 if ((bfd_get_section_flags (abfd
, sec
) & SEC_GROUP
) != 0)
950 Group sections look like debugging sections but they are not.
951 (They have a non-zero size but they are not ALLOCated). */
952 if (strip_symbols
== STRIP_NONDEBUG
)
956 If we are going to strip the group signature symbol, then
957 strip the group section too. */
958 gsym
= group_signature (sec
);
963 if ((strip_symbols
== STRIP_ALL
964 && !is_specified_symbol (gname
, keep_specific_htab
))
965 || is_specified_symbol (gname
, strip_specific_htab
))
972 /* Return true if SYM is a hidden symbol. */
975 is_hidden_symbol (asymbol
*sym
)
977 elf_symbol_type
*elf_sym
;
979 elf_sym
= elf_symbol_from (sym
->the_bfd
, sym
);
981 switch (ELF_ST_VISIBILITY (elf_sym
->internal_elf_sym
.st_other
))
990 /* Choose which symbol entries to copy; put the result in OSYMS.
991 We don't copy in place, because that confuses the relocs.
992 Return the number of symbols to print. */
995 filter_symbols (bfd
*abfd
, bfd
*obfd
, asymbol
**osyms
,
996 asymbol
**isyms
, long symcount
)
998 asymbol
**from
= isyms
, **to
= osyms
;
999 long src_count
= 0, dst_count
= 0;
1000 int relocatable
= (abfd
->flags
& (EXEC_P
| DYNAMIC
)) == 0;
1002 for (; src_count
< symcount
; src_count
++)
1004 asymbol
*sym
= from
[src_count
];
1005 flagword flags
= sym
->flags
;
1006 char *name
= (char *) bfd_asymbol_name (sym
);
1008 bfd_boolean used_in_reloc
= FALSE
;
1009 bfd_boolean undefined
;
1010 bfd_boolean rem_leading_char
;
1011 bfd_boolean add_leading_char
;
1013 undefined
= bfd_is_und_section (bfd_get_section (sym
));
1015 if (redefine_sym_list
)
1017 char *old_name
, *new_name
;
1019 old_name
= (char *) bfd_asymbol_name (sym
);
1020 new_name
= (char *) lookup_sym_redefinition (old_name
);
1021 bfd_asymbol_name (sym
) = new_name
;
1025 /* Check if we will remove the current leading character. */
1027 (name
[0] == bfd_get_symbol_leading_char (abfd
))
1028 && (change_leading_char
1029 || (remove_leading_char
1030 && ((flags
& (BSF_GLOBAL
| BSF_WEAK
)) != 0
1032 || bfd_is_com_section (bfd_get_section (sym
)))));
1034 /* Check if we will add a new leading character. */
1037 && (bfd_get_symbol_leading_char (obfd
) != '\0')
1038 && (bfd_get_symbol_leading_char (abfd
) == '\0'
1039 || (name
[0] == bfd_get_symbol_leading_char (abfd
)));
1041 /* Short circuit for change_leading_char if we can do it in-place. */
1042 if (rem_leading_char
&& add_leading_char
&& !prefix_symbols_string
)
1044 name
[0] = bfd_get_symbol_leading_char (obfd
);
1045 bfd_asymbol_name (sym
) = name
;
1046 rem_leading_char
= FALSE
;
1047 add_leading_char
= FALSE
;
1050 /* Remove leading char. */
1051 if (rem_leading_char
)
1052 bfd_asymbol_name (sym
) = ++name
;
1054 /* Add new leading char and/or prefix. */
1055 if (add_leading_char
|| prefix_symbols_string
)
1059 ptr
= n
= xmalloc (1 + strlen (prefix_symbols_string
)
1060 + strlen (name
) + 1);
1061 if (add_leading_char
)
1062 *ptr
++ = bfd_get_symbol_leading_char (obfd
);
1064 if (prefix_symbols_string
)
1066 strcpy (ptr
, prefix_symbols_string
);
1067 ptr
+= strlen (prefix_symbols_string
);
1071 bfd_asymbol_name (sym
) = n
;
1075 if (strip_symbols
== STRIP_ALL
)
1077 else if ((flags
& BSF_KEEP
) != 0 /* Used in relocation. */
1078 || ((flags
& BSF_SECTION_SYM
) != 0
1079 && ((*bfd_get_section (sym
)->symbol_ptr_ptr
)->flags
1083 used_in_reloc
= TRUE
;
1085 else if (relocatable
/* Relocatable file. */
1086 && ((flags
& (BSF_GLOBAL
| BSF_WEAK
)) != 0
1087 || bfd_is_com_section (bfd_get_section (sym
))))
1089 else if (bfd_decode_symclass (sym
) == 'I')
1090 /* Global symbols in $idata sections need to be retained
1091 even if relocatable is FALSE. External users of the
1092 library containing the $idata section may reference these
1095 else if ((flags
& BSF_GLOBAL
) != 0 /* Global symbol. */
1096 || (flags
& BSF_WEAK
) != 0
1098 || bfd_is_com_section (bfd_get_section (sym
)))
1099 keep
= strip_symbols
!= STRIP_UNNEEDED
;
1100 else if ((flags
& BSF_DEBUGGING
) != 0) /* Debugging symbol. */
1101 keep
= (strip_symbols
!= STRIP_DEBUG
1102 && strip_symbols
!= STRIP_UNNEEDED
1103 && ! convert_debugging
);
1104 else if (bfd_coff_get_comdat_section (abfd
, bfd_get_section (sym
)))
1105 /* COMDAT sections store special information in local
1106 symbols, so we cannot risk stripping any of them. */
1108 else /* Local symbol. */
1109 keep
= (strip_symbols
!= STRIP_UNNEEDED
1110 && (discard_locals
!= LOCALS_ALL
1111 && (discard_locals
!= LOCALS_START_L
1112 || ! bfd_is_local_label (abfd
, sym
))));
1114 if (keep
&& is_specified_symbol (name
, strip_specific_htab
))
1116 /* There are multiple ways to set 'keep' above, but if it
1117 was the relocatable symbol case, then that's an error. */
1120 non_fatal (_("not stripping symbol `%s' because it is named in a relocation"), name
);
1128 && !(flags
& BSF_KEEP
)
1129 && is_specified_symbol (name
, strip_unneeded_htab
))
1133 && ((keep_file_symbols
&& (flags
& BSF_FILE
))
1134 || is_specified_symbol (name
, keep_specific_htab
)))
1137 if (keep
&& is_strip_section (abfd
, bfd_get_section (sym
)))
1142 if ((flags
& BSF_GLOBAL
) != 0
1143 && (weaken
|| is_specified_symbol (name
, weaken_specific_htab
)))
1145 sym
->flags
&= ~ BSF_GLOBAL
;
1146 sym
->flags
|= BSF_WEAK
;
1150 && (flags
& (BSF_GLOBAL
| BSF_WEAK
))
1151 && (is_specified_symbol (name
, localize_specific_htab
)
1152 || (htab_elements (keepglobal_specific_htab
) != 0
1153 && ! is_specified_symbol (name
, keepglobal_specific_htab
))
1154 || (localize_hidden
&& is_hidden_symbol (sym
))))
1156 sym
->flags
&= ~ (BSF_GLOBAL
| BSF_WEAK
);
1157 sym
->flags
|= BSF_LOCAL
;
1161 && (flags
& BSF_LOCAL
)
1162 && is_specified_symbol (name
, globalize_specific_htab
))
1164 sym
->flags
&= ~ BSF_LOCAL
;
1165 sym
->flags
|= BSF_GLOBAL
;
1168 to
[dst_count
++] = sym
;
1172 to
[dst_count
] = NULL
;
1177 /* Find the redefined name of symbol SOURCE. */
1180 lookup_sym_redefinition (const char *source
)
1182 struct redefine_node
*list
;
1184 for (list
= redefine_sym_list
; list
!= NULL
; list
= list
->next
)
1185 if (strcmp (source
, list
->source
) == 0)
1186 return list
->target
;
1191 /* Add a node to a symbol redefine list. */
1194 redefine_list_append (const char *cause
, const char *source
, const char *target
)
1196 struct redefine_node
**p
;
1197 struct redefine_node
*list
;
1198 struct redefine_node
*new_node
;
1200 for (p
= &redefine_sym_list
; (list
= *p
) != NULL
; p
= &list
->next
)
1202 if (strcmp (source
, list
->source
) == 0)
1203 fatal (_("%s: Multiple redefinition of symbol \"%s\""),
1206 if (strcmp (target
, list
->target
) == 0)
1207 fatal (_("%s: Symbol \"%s\" is target of more than one redefinition"),
1211 new_node
= xmalloc (sizeof (struct redefine_node
));
1213 new_node
->source
= strdup (source
);
1214 new_node
->target
= strdup (target
);
1215 new_node
->next
= NULL
;
1220 /* Handle the --redefine-syms option. Read lines containing "old new"
1221 from the file, and add them to the symbol redefine list. */
1224 add_redefine_syms_file (const char *filename
)
1233 file
= fopen (filename
, "r");
1235 fatal (_("couldn't open symbol redefinition file %s (error: %s)"),
1236 filename
, strerror (errno
));
1239 buf
= xmalloc (bufsize
);
1247 /* Collect the input symbol name. */
1248 while (! IS_WHITESPACE (c
) && ! IS_LINE_TERMINATOR (c
) && c
!= EOF
)
1256 buf
= xrealloc (buf
, bufsize
);
1264 /* Eat white space between the symbol names. */
1265 while (IS_WHITESPACE (c
))
1267 if (c
== '#' || IS_LINE_TERMINATOR (c
))
1272 /* Collect the output symbol name. */
1274 while (! IS_WHITESPACE (c
) && ! IS_LINE_TERMINATOR (c
) && c
!= EOF
)
1282 buf
= xrealloc (buf
, bufsize
);
1290 /* Eat white space at end of line. */
1291 while (! IS_LINE_TERMINATOR(c
) && c
!= EOF
&& IS_WHITESPACE (c
))
1296 if ((c
== '\r' && (c
= getc (file
)) == '\n')
1297 || c
== '\n' || c
== EOF
)
1300 /* Append the redefinition to the list. */
1302 redefine_list_append (filename
, &buf
[0], &buf
[outsym_off
]);
1313 fatal (_("%s:%d: garbage found at end of line"), filename
, lineno
);
1315 if (len
!= 0 && (outsym_off
== 0 || outsym_off
== len
))
1316 fatal (_("%s:%d: missing new symbol name"), filename
, lineno
);
1319 /* Eat the rest of the line and finish it. */
1320 while (c
!= '\n' && c
!= EOF
)
1326 fatal (_("%s:%d: premature end of file"), filename
, lineno
);
1331 /* Copy unkown object file IBFD onto OBFD.
1332 Returns TRUE upon success, FALSE otherwise. */
1335 copy_unknown_object (bfd
*ibfd
, bfd
*obfd
)
1343 if (bfd_stat_arch_elt (ibfd
, &buf
) != 0)
1345 bfd_nonfatal_message (NULL
, ibfd
, NULL
, NULL
);
1352 non_fatal (_("stat returns negative size for `%s'"),
1353 bfd_get_archive_filename (ibfd
));
1357 if (bfd_seek (ibfd
, (file_ptr
) 0, SEEK_SET
) != 0)
1359 bfd_nonfatal (bfd_get_archive_filename (ibfd
));
1364 printf (_("copy from `%s' [unknown] to `%s' [unknown]\n"),
1365 bfd_get_archive_filename (ibfd
), bfd_get_filename (obfd
));
1367 cbuf
= xmalloc (BUFSIZE
);
1369 while (ncopied
< size
)
1371 tocopy
= size
- ncopied
;
1372 if (tocopy
> BUFSIZE
)
1375 if (bfd_bread (cbuf
, (bfd_size_type
) tocopy
, ibfd
)
1376 != (bfd_size_type
) tocopy
)
1378 bfd_nonfatal_message (NULL
, ibfd
, NULL
, NULL
);
1383 if (bfd_bwrite (cbuf
, (bfd_size_type
) tocopy
, obfd
)
1384 != (bfd_size_type
) tocopy
)
1386 bfd_nonfatal_message (NULL
, obfd
, NULL
, NULL
);
1394 chmod (bfd_get_filename (obfd
), buf
.st_mode
);
1399 /* Copy object file IBFD onto OBFD.
1400 Returns TRUE upon success, FALSE otherwise. */
1403 copy_object (bfd
*ibfd
, bfd
*obfd
)
1407 asection
**osections
= NULL
;
1408 asection
*gnu_debuglink_section
= NULL
;
1409 bfd_size_type
*gaps
= NULL
;
1410 bfd_size_type max_gap
= 0;
1413 enum bfd_architecture iarch
;
1416 if (ibfd
->xvec
->byteorder
!= obfd
->xvec
->byteorder
1417 && ibfd
->xvec
->byteorder
!= BFD_ENDIAN_UNKNOWN
1418 && obfd
->xvec
->byteorder
!= BFD_ENDIAN_UNKNOWN
)
1419 fatal (_("Unable to change endianness of input file(s)"));
1421 if (!bfd_set_format (obfd
, bfd_get_format (ibfd
)))
1423 bfd_nonfatal_message (NULL
, obfd
, NULL
, NULL
);
1428 printf (_("copy from `%s' [%s] to `%s' [%s]\n"),
1429 bfd_get_archive_filename (ibfd
), bfd_get_target (ibfd
),
1430 bfd_get_filename (obfd
), bfd_get_target (obfd
));
1439 start
= bfd_get_start_address (ibfd
);
1440 start
+= change_start
;
1443 /* Neither the start address nor the flags
1444 need to be set for a core file. */
1445 if (bfd_get_format (obfd
) != bfd_core
)
1449 flags
= bfd_get_file_flags (ibfd
);
1450 flags
|= bfd_flags_to_set
;
1451 flags
&= ~bfd_flags_to_clear
;
1452 flags
&= bfd_applicable_file_flags (obfd
);
1454 if (strip_symbols
== STRIP_ALL
)
1455 flags
&= ~HAS_RELOC
;
1457 if (!bfd_set_start_address (obfd
, start
)
1458 || !bfd_set_file_flags (obfd
, flags
))
1460 bfd_nonfatal_message (NULL
, ibfd
, NULL
, NULL
);
1465 /* Copy architecture of input file to output file. */
1466 iarch
= bfd_get_arch (ibfd
);
1467 imach
= bfd_get_mach (ibfd
);
1468 if (!bfd_set_arch_mach (obfd
, iarch
, imach
)
1469 && (ibfd
->target_defaulted
1470 || bfd_get_arch (ibfd
) != bfd_get_arch (obfd
)))
1472 if (bfd_get_arch (ibfd
) == bfd_arch_unknown
)
1473 non_fatal (_("Unable to recognise the format of the input file `%s'"),
1474 bfd_get_archive_filename (ibfd
));
1476 non_fatal (_("Warning: Output file cannot represent architecture `%s'"),
1477 bfd_printable_arch_mach (bfd_get_arch (ibfd
),
1478 bfd_get_mach (ibfd
)));
1482 if (!bfd_set_format (obfd
, bfd_get_format (ibfd
)))
1484 bfd_nonfatal_message (NULL
, ibfd
, NULL
, NULL
);
1488 if (bfd_get_flavour (obfd
) == bfd_target_coff_flavour
1489 && bfd_pei_p (obfd
))
1491 /* Set up PE parameters. */
1492 pe_data_type
*pe
= pe_data (obfd
);
1494 /* Copy PE parameters before changing them. */
1495 if (ibfd
->xvec
->flavour
== bfd_target_coff_flavour
1496 && bfd_pei_p (ibfd
))
1497 pe
->pe_opthdr
= pe_data (ibfd
)->pe_opthdr
;
1499 if (pe_file_alignment
!= (bfd_vma
) -1)
1500 pe
->pe_opthdr
.FileAlignment
= pe_file_alignment
;
1502 pe_file_alignment
= PE_DEF_FILE_ALIGNMENT
;
1504 if (pe_heap_commit
!= (bfd_vma
) -1)
1505 pe
->pe_opthdr
.SizeOfHeapCommit
= pe_heap_commit
;
1507 if (pe_heap_reserve
!= (bfd_vma
) -1)
1508 pe
->pe_opthdr
.SizeOfHeapCommit
= pe_heap_reserve
;
1510 if (pe_image_base
!= (bfd_vma
) -1)
1511 pe
->pe_opthdr
.ImageBase
= pe_image_base
;
1513 if (pe_section_alignment
!= (bfd_vma
) -1)
1514 pe
->pe_opthdr
.SectionAlignment
= pe_section_alignment
;
1516 pe_section_alignment
= PE_DEF_SECTION_ALIGNMENT
;
1518 if (pe_stack_commit
!= (bfd_vma
) -1)
1519 pe
->pe_opthdr
.SizeOfStackCommit
= pe_stack_commit
;
1521 if (pe_stack_reserve
!= (bfd_vma
) -1)
1522 pe
->pe_opthdr
.SizeOfStackCommit
= pe_stack_reserve
;
1524 if (pe_subsystem
!= -1)
1525 pe
->pe_opthdr
.Subsystem
= pe_subsystem
;
1527 if (pe_major_subsystem_version
!= -1)
1528 pe
->pe_opthdr
.MajorSubsystemVersion
= pe_major_subsystem_version
;
1530 if (pe_minor_subsystem_version
!= -1)
1531 pe
->pe_opthdr
.MinorSubsystemVersion
= pe_minor_subsystem_version
;
1533 if (pe_file_alignment
> pe_section_alignment
)
1535 char file_alignment
[20], section_alignment
[20];
1537 sprintf_vma (file_alignment
, pe_file_alignment
);
1538 sprintf_vma (section_alignment
, pe_section_alignment
);
1539 non_fatal (_("warning: file alignment (0x%s) > section alignment (0x%s)"),
1541 file_alignment
, section_alignment
);
1548 if (osympp
!= isympp
)
1554 symsize
= bfd_get_symtab_upper_bound (ibfd
);
1557 bfd_nonfatal_message (NULL
, ibfd
, NULL
, NULL
);
1561 osympp
= isympp
= xmalloc (symsize
);
1562 symcount
= bfd_canonicalize_symtab (ibfd
, isympp
);
1565 bfd_nonfatal_message (NULL
, ibfd
, NULL
, NULL
);
1569 /* BFD mandates that all output sections be created and sizes set before
1570 any output is done. Thus, we traverse all sections multiple times. */
1571 bfd_map_over_sections (ibfd
, setup_section
, obfd
);
1573 if (!extract_symbol
)
1574 setup_bfd_headers (ibfd
, obfd
);
1576 if (add_sections
!= NULL
)
1578 struct section_add
*padd
;
1579 struct section_list
*pset
;
1581 for (padd
= add_sections
; padd
!= NULL
; padd
= padd
->next
)
1585 pset
= find_section_list (padd
->name
, FALSE
);
1589 flags
= SEC_HAS_CONTENTS
| SEC_READONLY
| SEC_DATA
;
1590 if (pset
!= NULL
&& pset
->set_flags
)
1591 flags
= pset
->flags
| SEC_HAS_CONTENTS
;
1593 /* bfd_make_section_with_flags() does not return very helpful
1594 error codes, so check for the most likely user error first. */
1595 if (bfd_get_section_by_name (obfd
, padd
->name
))
1597 bfd_nonfatal_message (NULL
, obfd
, NULL
,
1598 _("can't add section '%s'"), padd
->name
);
1603 padd
->section
= bfd_make_section_with_flags (obfd
, padd
->name
, flags
);
1604 if (padd
->section
== NULL
)
1606 bfd_nonfatal_message (NULL
, obfd
, NULL
,
1607 _("can't create section `%s'"),
1613 if (! bfd_set_section_size (obfd
, padd
->section
, padd
->size
))
1615 bfd_nonfatal_message (NULL
, obfd
, padd
->section
, NULL
);
1621 if (pset
->change_vma
!= CHANGE_IGNORE
)
1622 if (! bfd_set_section_vma (obfd
, padd
->section
,
1625 bfd_nonfatal_message (NULL
, obfd
, padd
->section
, NULL
);
1629 if (pset
->change_lma
!= CHANGE_IGNORE
)
1631 padd
->section
->lma
= pset
->lma_val
;
1633 if (! bfd_set_section_alignment
1634 (obfd
, padd
->section
,
1635 bfd_section_alignment (obfd
, padd
->section
)))
1637 bfd_nonfatal_message (NULL
, obfd
, padd
->section
, NULL
);
1645 if (gnu_debuglink_filename
!= NULL
)
1647 gnu_debuglink_section
= bfd_create_gnu_debuglink_section
1648 (obfd
, gnu_debuglink_filename
);
1650 if (gnu_debuglink_section
== NULL
)
1652 bfd_nonfatal_message (NULL
, obfd
, NULL
,
1653 _("cannot create debug link section `%s'"),
1654 gnu_debuglink_filename
);
1658 /* Special processing for PE format files. We
1659 have no way to distinguish PE from COFF here. */
1660 if (bfd_get_flavour (obfd
) == bfd_target_coff_flavour
)
1662 bfd_vma debuglink_vma
;
1663 asection
* highest_section
;
1666 /* The PE spec requires that all sections be adjacent and sorted
1667 in ascending order of VMA. It also specifies that debug
1668 sections should be last. This is despite the fact that debug
1669 sections are not loaded into memory and so in theory have no
1672 This means that the debuglink section must be given a non-zero
1673 VMA which makes it contiguous with other debug sections. So
1674 walk the current section list, find the section with the
1675 highest VMA and start the debuglink section after that one. */
1676 for (sec
= obfd
->sections
, highest_section
= NULL
;
1680 && (highest_section
== NULL
1681 || sec
->vma
> highest_section
->vma
))
1682 highest_section
= sec
;
1684 if (highest_section
)
1685 debuglink_vma
= BFD_ALIGN (highest_section
->vma
1686 + highest_section
->size
,
1687 /* FIXME: We ought to be using
1688 COFF_PAGE_SIZE here or maybe
1689 bfd_get_section_alignment() (if it
1690 was set) but since this is for PE
1691 and we know the required alignment
1692 it is easier just to hard code it. */
1695 /* Umm, not sure what to do in this case. */
1696 debuglink_vma
= 0x1000;
1698 bfd_set_section_vma (obfd
, gnu_debuglink_section
, debuglink_vma
);
1702 if (bfd_count_sections (obfd
) != 0
1703 && (gap_fill_set
|| pad_to_set
))
1708 /* We must fill in gaps between the sections and/or we must pad
1709 the last section to a specified address. We do this by
1710 grabbing a list of the sections, sorting them by VMA, and
1711 increasing the section sizes as required to fill the gaps.
1712 We write out the gap contents below. */
1714 c
= bfd_count_sections (obfd
);
1715 osections
= xmalloc (c
* sizeof (asection
*));
1717 bfd_map_over_sections (obfd
, get_sections
, &set
);
1719 qsort (osections
, c
, sizeof (asection
*), compare_section_lma
);
1721 gaps
= xmalloc (c
* sizeof (bfd_size_type
));
1722 memset (gaps
, 0, c
* sizeof (bfd_size_type
));
1726 for (i
= 0; i
< c
- 1; i
++)
1730 bfd_vma gap_start
, gap_stop
;
1732 flags
= bfd_get_section_flags (obfd
, osections
[i
]);
1733 if ((flags
& SEC_HAS_CONTENTS
) == 0
1734 || (flags
& SEC_LOAD
) == 0)
1737 size
= bfd_section_size (obfd
, osections
[i
]);
1738 gap_start
= bfd_section_lma (obfd
, osections
[i
]) + size
;
1739 gap_stop
= bfd_section_lma (obfd
, osections
[i
+ 1]);
1740 if (gap_start
< gap_stop
)
1742 if (! bfd_set_section_size (obfd
, osections
[i
],
1743 size
+ (gap_stop
- gap_start
)))
1745 bfd_nonfatal_message (NULL
, obfd
, osections
[i
],
1746 _("Can't fill gap after section"));
1750 gaps
[i
] = gap_stop
- gap_start
;
1751 if (max_gap
< gap_stop
- gap_start
)
1752 max_gap
= gap_stop
- gap_start
;
1762 lma
= bfd_section_lma (obfd
, osections
[c
- 1]);
1763 size
= bfd_section_size (obfd
, osections
[c
- 1]);
1764 if (lma
+ size
< pad_to
)
1766 if (! bfd_set_section_size (obfd
, osections
[c
- 1],
1769 bfd_nonfatal_message (NULL
, obfd
, osections
[c
- 1],
1770 _("can't add padding"));
1775 gaps
[c
- 1] = pad_to
- (lma
+ size
);
1776 if (max_gap
< pad_to
- (lma
+ size
))
1777 max_gap
= pad_to
- (lma
+ size
);
1783 /* Symbol filtering must happen after the output sections
1784 have been created, but before their contents are set. */
1786 if (convert_debugging
)
1787 dhandle
= read_debugging_info (ibfd
, isympp
, symcount
, FALSE
);
1789 if (strip_symbols
== STRIP_DEBUG
1790 || strip_symbols
== STRIP_ALL
1791 || strip_symbols
== STRIP_UNNEEDED
1792 || strip_symbols
== STRIP_NONDEBUG
1793 || discard_locals
!= LOCALS_UNDEF
1795 || htab_elements (strip_specific_htab
) != 0
1796 || htab_elements (keep_specific_htab
) != 0
1797 || htab_elements (localize_specific_htab
) != 0
1798 || htab_elements (globalize_specific_htab
) != 0
1799 || htab_elements (keepglobal_specific_htab
) != 0
1800 || htab_elements (weaken_specific_htab
) != 0
1801 || prefix_symbols_string
1804 || convert_debugging
1805 || change_leading_char
1806 || remove_leading_char
1807 || redefine_sym_list
1810 /* Mark symbols used in output relocations so that they
1811 are kept, even if they are local labels or static symbols.
1813 Note we iterate over the input sections examining their
1814 relocations since the relocations for the output sections
1815 haven't been set yet. mark_symbols_used_in_relocations will
1816 ignore input sections which have no corresponding output
1818 if (strip_symbols
!= STRIP_ALL
)
1819 bfd_map_over_sections (ibfd
,
1820 mark_symbols_used_in_relocations
,
1822 osympp
= xmalloc ((symcount
+ 1) * sizeof (asymbol
*));
1823 symcount
= filter_symbols (ibfd
, obfd
, osympp
, isympp
, symcount
);
1826 if (convert_debugging
&& dhandle
!= NULL
)
1828 if (! write_debugging_info (obfd
, dhandle
, &symcount
, &osympp
))
1835 bfd_set_symtab (obfd
, osympp
, symcount
);
1837 /* This has to happen after the symbol table has been set. */
1838 bfd_map_over_sections (ibfd
, copy_section
, obfd
);
1840 if (add_sections
!= NULL
)
1842 struct section_add
*padd
;
1844 for (padd
= add_sections
; padd
!= NULL
; padd
= padd
->next
)
1846 if (! bfd_set_section_contents (obfd
, padd
->section
, padd
->contents
,
1849 bfd_nonfatal_message (NULL
, obfd
, padd
->section
, NULL
);
1855 if (gnu_debuglink_filename
!= NULL
)
1857 if (! bfd_fill_in_gnu_debuglink_section
1858 (obfd
, gnu_debuglink_section
, gnu_debuglink_filename
))
1860 bfd_nonfatal_message (NULL
, obfd
, NULL
,
1861 _("cannot fill debug link section `%s'"),
1862 gnu_debuglink_filename
);
1867 if (gap_fill_set
|| pad_to_set
)
1872 /* Fill in the gaps. */
1875 buf
= xmalloc (max_gap
);
1876 memset (buf
, gap_fill
, max_gap
);
1878 c
= bfd_count_sections (obfd
);
1879 for (i
= 0; i
< c
; i
++)
1887 off
= bfd_section_size (obfd
, osections
[i
]) - left
;
1898 if (! bfd_set_section_contents (obfd
, osections
[i
], buf
,
1901 bfd_nonfatal_message (NULL
, obfd
, osections
[i
], NULL
);
1912 /* Do not copy backend data if --extract-symbol is passed; anything
1913 that needs to look at the section contents will fail. */
1917 /* Allow the BFD backend to copy any private data it understands
1918 from the input BFD to the output BFD. This is done last to
1919 permit the routine to look at the filtered symbol table, which is
1920 important for the ECOFF code at least. */
1921 if (! bfd_copy_private_bfd_data (ibfd
, obfd
))
1923 bfd_nonfatal_message (NULL
, obfd
, NULL
,
1924 _("error copying private BFD data"));
1928 /* Switch to the alternate machine code. We have to do this at the
1929 very end, because we only initialize the header when we create
1930 the first section. */
1931 if (use_alt_mach_code
!= 0)
1933 if (! bfd_alt_mach_code (obfd
, use_alt_mach_code
))
1935 non_fatal (_("this target does not support %lu alternative machine codes"),
1937 if (bfd_get_flavour (obfd
) == bfd_target_elf_flavour
)
1939 non_fatal (_("treating that number as an absolute e_machine value instead"));
1940 elf_elfheader (obfd
)->e_machine
= use_alt_mach_code
;
1943 non_fatal (_("ignoring the alternative value"));
1950 /* Read each archive element in turn from IBFD, copy the
1951 contents to temp file, and keep the temp file handle.
1952 If 'force_output_target' is TRUE then make sure that
1953 all elements in the new archive are of the type
1957 copy_archive (bfd
*ibfd
, bfd
*obfd
, const char *output_target
,
1958 bfd_boolean force_output_target
)
1962 struct name_list
*next
;
1966 bfd
**ptr
= &obfd
->archive_head
;
1969 const char *filename
;
1971 /* Make a temp directory to hold the contents. */
1972 dir
= make_tempdir (bfd_get_filename (obfd
));
1974 fatal (_("cannot create tempdir for archive copying (error: %s)"),
1977 obfd
->has_armap
= ibfd
->has_armap
;
1978 obfd
->is_thin_archive
= ibfd
->is_thin_archive
;
1982 this_element
= bfd_openr_next_archived_file (ibfd
, NULL
);
1984 if (!bfd_set_format (obfd
, bfd_get_format (ibfd
)))
1987 bfd_nonfatal_message (NULL
, obfd
, NULL
, NULL
);
1991 while (!status
&& this_element
!= NULL
)
1997 int stat_status
= 0;
1998 bfd_boolean
delete = TRUE
;
2000 /* Create an output file for this member. */
2001 output_name
= concat (dir
, "/",
2002 bfd_get_filename (this_element
), (char *) 0);
2004 /* If the file already exists, make another temp dir. */
2005 if (stat (output_name
, &buf
) >= 0)
2007 output_name
= make_tempdir (output_name
);
2008 if (output_name
== NULL
)
2009 fatal (_("cannot create tempdir for archive copying (error: %s)"),
2012 l
= xmalloc (sizeof (struct name_list
));
2013 l
->name
= output_name
;
2017 output_name
= concat (output_name
, "/",
2018 bfd_get_filename (this_element
), (char *) 0);
2023 stat_status
= bfd_stat_arch_elt (this_element
, &buf
);
2025 if (stat_status
!= 0)
2026 non_fatal (_("internal stat error on %s"),
2027 bfd_get_filename (this_element
));
2030 l
= xmalloc (sizeof (struct name_list
));
2031 l
->name
= output_name
;
2036 if (bfd_check_format (this_element
, bfd_object
))
2038 /* PR binutils/3110: Cope with archives
2039 containing multiple target types. */
2040 if (force_output_target
)
2041 output_bfd
= bfd_openw (output_name
, output_target
);
2043 output_bfd
= bfd_openw (output_name
, bfd_get_target (this_element
));
2045 if (output_bfd
== NULL
)
2047 bfd_nonfatal_message (output_name
, NULL
, NULL
, NULL
);
2052 delete = ! copy_object (this_element
, output_bfd
);
2055 || bfd_get_arch (this_element
) != bfd_arch_unknown
)
2057 if (!bfd_close (output_bfd
))
2059 bfd_nonfatal_message (output_name
, NULL
, NULL
, NULL
);
2060 /* Error in new object file. Don't change archive. */
2065 goto copy_unknown_element
;
2069 bfd_nonfatal_message (NULL
, this_element
, NULL
,
2070 _("Unable to recognise the format of file"));
2072 output_bfd
= bfd_openw (output_name
, output_target
);
2073 copy_unknown_element
:
2074 delete = !copy_unknown_object (this_element
, output_bfd
);
2075 if (!bfd_close_all_done (output_bfd
))
2077 bfd_nonfatal_message (output_name
, NULL
, NULL
, NULL
);
2078 /* Error in new object file. Don't change archive. */
2085 unlink (output_name
);
2090 if (preserve_dates
&& stat_status
== 0)
2091 set_times (output_name
, &buf
);
2093 /* Open the newly output file and attach to our list. */
2094 output_bfd
= bfd_openr (output_name
, output_target
);
2096 l
->obfd
= output_bfd
;
2099 ptr
= &output_bfd
->archive_next
;
2101 last_element
= this_element
;
2103 this_element
= bfd_openr_next_archived_file (ibfd
, last_element
);
2105 bfd_close (last_element
);
2110 filename
= bfd_get_filename (obfd
);
2111 if (!bfd_close (obfd
))
2114 bfd_nonfatal_message (filename
, NULL
, NULL
, NULL
);
2118 filename
= bfd_get_filename (ibfd
);
2119 if (!bfd_close (ibfd
))
2122 bfd_nonfatal_message (filename
, NULL
, NULL
, NULL
);
2126 /* Delete all the files that we opened. */
2127 for (l
= list
; l
!= NULL
; l
= l
->next
)
2129 if (l
->obfd
== NULL
)
2133 bfd_close (l
->obfd
);
2141 set_long_section_mode (bfd
*output_bfd
, bfd
*input_bfd
, enum long_section_name_handling style
)
2143 /* This is only relevant to Coff targets. */
2144 if (bfd_get_flavour (output_bfd
) == bfd_target_coff_flavour
)
2147 && bfd_get_flavour (input_bfd
) == bfd_target_coff_flavour
)
2148 style
= bfd_coff_long_section_names (input_bfd
) ? ENABLE
: DISABLE
;
2149 bfd_coff_set_long_section_names (output_bfd
, style
!= DISABLE
);
2153 /* The top-level control. */
2156 copy_file (const char *input_filename
, const char *output_filename
,
2157 const char *input_target
, const char *output_target
)
2160 char **obj_matching
;
2161 char **core_matching
;
2162 off_t size
= get_file_size (input_filename
);
2167 non_fatal (_("error: the input file '%s' is empty"),
2173 /* To allow us to do "strip *" without dying on the first
2174 non-object file, failures are nonfatal. */
2175 ibfd
= bfd_openr (input_filename
, input_target
);
2178 bfd_nonfatal_message (input_filename
, NULL
, NULL
, NULL
);
2183 if (bfd_check_format (ibfd
, bfd_archive
))
2185 bfd_boolean force_output_target
;
2188 /* bfd_get_target does not return the correct value until
2189 bfd_check_format succeeds. */
2190 if (output_target
== NULL
)
2192 output_target
= bfd_get_target (ibfd
);
2193 force_output_target
= FALSE
;
2196 force_output_target
= TRUE
;
2198 obfd
= bfd_openw (output_filename
, output_target
);
2201 bfd_nonfatal_message (output_filename
, NULL
, NULL
, NULL
);
2205 /* This is a no-op on non-Coff targets. */
2206 set_long_section_mode (obfd
, ibfd
, long_section_names
);
2208 copy_archive (ibfd
, obfd
, output_target
, force_output_target
);
2210 else if (bfd_check_format_matches (ibfd
, bfd_object
, &obj_matching
))
2215 /* bfd_get_target does not return the correct value until
2216 bfd_check_format succeeds. */
2217 if (output_target
== NULL
)
2218 output_target
= bfd_get_target (ibfd
);
2220 obfd
= bfd_openw (output_filename
, output_target
);
2223 bfd_nonfatal_message (output_filename
, NULL
, NULL
, NULL
);
2227 /* This is a no-op on non-Coff targets. */
2228 set_long_section_mode (obfd
, ibfd
, long_section_names
);
2230 if (! copy_object (ibfd
, obfd
))
2233 if (!bfd_close (obfd
))
2236 bfd_nonfatal_message (output_filename
, NULL
, NULL
, NULL
);
2240 if (!bfd_close (ibfd
))
2243 bfd_nonfatal_message (input_filename
, NULL
, NULL
, NULL
);
2249 bfd_error_type obj_error
= bfd_get_error ();
2250 bfd_error_type core_error
;
2252 if (bfd_check_format_matches (ibfd
, bfd_core
, &core_matching
))
2254 /* This probably can't happen.. */
2255 if (obj_error
== bfd_error_file_ambiguously_recognized
)
2256 free (obj_matching
);
2260 core_error
= bfd_get_error ();
2261 /* Report the object error in preference to the core error. */
2262 if (obj_error
!= core_error
)
2263 bfd_set_error (obj_error
);
2265 bfd_nonfatal_message (input_filename
, NULL
, NULL
, NULL
);
2267 if (obj_error
== bfd_error_file_ambiguously_recognized
)
2269 list_matching_formats (obj_matching
);
2270 free (obj_matching
);
2272 if (core_error
== bfd_error_file_ambiguously_recognized
)
2274 list_matching_formats (core_matching
);
2275 free (core_matching
);
2282 /* Add a name to the section renaming list. */
2285 add_section_rename (const char * old_name
, const char * new_name
,
2288 section_rename
* rename
;
2290 /* Check for conflicts first. */
2291 for (rename
= section_rename_list
; rename
!= NULL
; rename
= rename
->next
)
2292 if (strcmp (rename
->old_name
, old_name
) == 0)
2294 /* Silently ignore duplicate definitions. */
2295 if (strcmp (rename
->new_name
, new_name
) == 0
2296 && rename
->flags
== flags
)
2299 fatal (_("Multiple renames of section %s"), old_name
);
2302 rename
= xmalloc (sizeof (* rename
));
2304 rename
->old_name
= old_name
;
2305 rename
->new_name
= new_name
;
2306 rename
->flags
= flags
;
2307 rename
->next
= section_rename_list
;
2309 section_rename_list
= rename
;
2312 /* Check the section rename list for a new name of the input section
2313 ISECTION. Return the new name if one is found.
2314 Also set RETURNED_FLAGS to the flags to be used for this section. */
2317 find_section_rename (bfd
* ibfd ATTRIBUTE_UNUSED
, sec_ptr isection
,
2318 flagword
* returned_flags
)
2320 const char * old_name
= bfd_section_name (ibfd
, isection
);
2321 section_rename
* rename
;
2323 /* Default to using the flags of the input section. */
2324 * returned_flags
= bfd_get_section_flags (ibfd
, isection
);
2326 for (rename
= section_rename_list
; rename
!= NULL
; rename
= rename
->next
)
2327 if (strcmp (rename
->old_name
, old_name
) == 0)
2329 if (rename
->flags
!= (flagword
) -1)
2330 * returned_flags
= rename
->flags
;
2332 return rename
->new_name
;
2338 /* Once each of the sections is copied, we may still need to do some
2339 finalization work for private section headers. Do that here. */
2342 setup_bfd_headers (bfd
*ibfd
, bfd
*obfd
)
2344 /* Allow the BFD backend to copy any private data it understands
2345 from the input section to the output section. */
2346 if (! bfd_copy_private_header_data (ibfd
, obfd
))
2349 bfd_nonfatal_message (NULL
, ibfd
, NULL
,
2350 _("error in private header data"));
2354 /* All went well. */
2358 /* Create a section in OBFD with the same
2359 name and attributes as ISECTION in IBFD. */
2362 setup_section (bfd
*ibfd
, sec_ptr isection
, void *obfdarg
)
2364 bfd
*obfd
= obfdarg
;
2365 struct section_list
*p
;
2373 char *prefix
= NULL
;
2374 bfd_boolean make_nobits
;
2376 if (is_strip_section (ibfd
, isection
))
2379 p
= find_section_list (bfd_section_name (ibfd
, isection
), FALSE
);
2383 /* Get the, possibly new, name of the output section. */
2384 name
= find_section_rename (ibfd
, isection
, & flags
);
2386 /* Prefix sections. */
2387 if ((prefix_alloc_sections_string
)
2388 && (bfd_get_section_flags (ibfd
, isection
) & SEC_ALLOC
))
2389 prefix
= prefix_alloc_sections_string
;
2390 else if (prefix_sections_string
)
2391 prefix
= prefix_sections_string
;
2397 n
= xmalloc (strlen (prefix
) + strlen (name
) + 1);
2403 make_nobits
= FALSE
;
2404 if (p
!= NULL
&& p
->set_flags
)
2405 flags
= p
->flags
| (flags
& (SEC_HAS_CONTENTS
| SEC_RELOC
));
2406 else if (strip_symbols
== STRIP_NONDEBUG
2407 && (flags
& SEC_ALLOC
) != 0
2408 && (ibfd
->xvec
->flavour
!= bfd_target_elf_flavour
2409 || elf_section_type (isection
) != SHT_NOTE
))
2411 flags
&= ~(SEC_HAS_CONTENTS
| SEC_LOAD
);
2412 if (obfd
->xvec
->flavour
== bfd_target_elf_flavour
)
2416 /* Twiddle the input section flags so that it seems to
2417 elf.c:copy_private_bfd_data that section flags have not
2418 changed between input and output sections. This hack
2419 prevents wholesale rewriting of the program headers. */
2420 isection
->flags
&= ~(SEC_HAS_CONTENTS
| SEC_LOAD
);
2424 osection
= bfd_make_section_anyway_with_flags (obfd
, name
, flags
);
2426 if (osection
== NULL
)
2428 err
= _("failed to create output section");
2433 elf_section_type (osection
) = SHT_NOBITS
;
2435 size
= bfd_section_size (ibfd
, isection
);
2437 size
= (size
+ interleave
- 1) / interleave
;
2438 else if (extract_symbol
)
2440 if (! bfd_set_section_size (obfd
, osection
, size
))
2442 err
= _("failed to set size");
2446 vma
= bfd_section_vma (ibfd
, isection
);
2447 if (p
!= NULL
&& p
->change_vma
== CHANGE_MODIFY
)
2449 else if (p
!= NULL
&& p
->change_vma
== CHANGE_SET
)
2452 vma
+= change_section_address
;
2454 if (! bfd_set_section_vma (obfd
, osection
, vma
))
2456 err
= _("failed to set vma");
2460 lma
= isection
->lma
;
2461 if ((p
!= NULL
) && p
->change_lma
!= CHANGE_IGNORE
)
2463 if (p
->change_lma
== CHANGE_MODIFY
)
2465 else if (p
->change_lma
== CHANGE_SET
)
2471 lma
+= change_section_address
;
2473 osection
->lma
= lma
;
2475 /* FIXME: This is probably not enough. If we change the LMA we
2476 may have to recompute the header for the file as well. */
2477 if (!bfd_set_section_alignment (obfd
,
2479 bfd_section_alignment (ibfd
, isection
)))
2481 err
= _("failed to set alignment");
2485 /* Copy merge entity size. */
2486 osection
->entsize
= isection
->entsize
;
2488 /* This used to be mangle_section; we do here to avoid using
2489 bfd_get_section_by_name since some formats allow multiple
2490 sections with the same name. */
2491 isection
->output_section
= osection
;
2492 isection
->output_offset
= 0;
2494 /* Do not copy backend data if --extract-symbol is passed; anything
2495 that needs to look at the section contents will fail. */
2499 if ((isection
->flags
& SEC_GROUP
) != 0)
2501 asymbol
*gsym
= group_signature (isection
);
2505 gsym
->flags
|= BSF_KEEP
;
2506 if (ibfd
->xvec
->flavour
== bfd_target_elf_flavour
)
2507 elf_group_id (isection
) = gsym
;
2511 /* Allow the BFD backend to copy any private data it understands
2512 from the input section to the output section. */
2513 if (!bfd_copy_private_section_data (ibfd
, isection
, obfd
, osection
))
2515 err
= _("failed to copy private data");
2519 /* All went well. */
2524 bfd_nonfatal_message (NULL
, obfd
, osection
, err
);
2527 /* Copy the data of input section ISECTION of IBFD
2528 to an output section with the same name in OBFD.
2529 If stripping then don't copy any relocation info. */
2532 copy_section (bfd
*ibfd
, sec_ptr isection
, void *obfdarg
)
2534 bfd
*obfd
= obfdarg
;
2535 struct section_list
*p
;
2543 /* If we have already failed earlier on,
2544 do not keep on generating complaints now. */
2548 if (is_strip_section (ibfd
, isection
))
2551 flags
= bfd_get_section_flags (ibfd
, isection
);
2552 if ((flags
& SEC_GROUP
) != 0)
2555 osection
= isection
->output_section
;
2556 size
= bfd_get_section_size (isection
);
2558 if (size
== 0 || osection
== 0)
2564 p
= find_section_list (bfd_get_section_name (ibfd
, isection
), FALSE
);
2566 /* Core files do not need to be relocated. */
2567 if (bfd_get_format (obfd
) == bfd_core
)
2571 relsize
= bfd_get_reloc_upper_bound (ibfd
, isection
);
2575 /* Do not complain if the target does not support relocations. */
2576 if (relsize
== -1 && bfd_get_error () == bfd_error_invalid_operation
)
2581 bfd_nonfatal_message (NULL
, ibfd
, isection
, NULL
);
2588 bfd_set_reloc (obfd
, osection
, NULL
, 0);
2591 relpp
= xmalloc (relsize
);
2592 relcount
= bfd_canonicalize_reloc (ibfd
, isection
, relpp
, isympp
);
2596 bfd_nonfatal_message (NULL
, ibfd
, isection
,
2597 _("relocation count is negative"));
2601 if (strip_symbols
== STRIP_ALL
)
2603 /* Remove relocations which are not in
2604 keep_strip_specific_list. */
2605 arelent
**temp_relpp
;
2606 long temp_relcount
= 0;
2609 temp_relpp
= xmalloc (relsize
);
2610 for (i
= 0; i
< relcount
; i
++)
2611 if (is_specified_symbol (bfd_asymbol_name (*relpp
[i
]->sym_ptr_ptr
),
2612 keep_specific_htab
))
2613 temp_relpp
[temp_relcount
++] = relpp
[i
];
2614 relcount
= temp_relcount
;
2619 bfd_set_reloc (obfd
, osection
, relcount
== 0 ? NULL
: relpp
, relcount
);
2624 if (bfd_get_section_flags (ibfd
, isection
) & SEC_HAS_CONTENTS
2625 && bfd_get_section_flags (obfd
, osection
) & SEC_HAS_CONTENTS
)
2627 void *memhunk
= xmalloc (size
);
2629 if (!bfd_get_section_contents (ibfd
, isection
, memhunk
, 0, size
))
2632 bfd_nonfatal_message (NULL
, ibfd
, isection
, NULL
);
2638 /* We don't handle leftover bytes (too many possible behaviors,
2639 and we don't know what the user wants). The section length
2640 must be a multiple of the number of bytes to swap. */
2641 if ((size
% reverse_bytes
) == 0)
2646 for (i
= 0; i
< size
; i
+= reverse_bytes
)
2647 for (j
= 0; j
< (unsigned long)(reverse_bytes
/ 2); j
++)
2649 bfd_byte
*m
= (bfd_byte
*) memhunk
;
2652 m
[i
+ j
] = m
[(i
+ reverse_bytes
) - (j
+ 1)];
2653 m
[(i
+ reverse_bytes
) - (j
+ 1)] = b
;
2657 /* User must pad the section up in order to do this. */
2658 fatal (_("cannot reverse bytes: length of section %s must be evenly divisible by %d"),
2659 bfd_section_name (ibfd
, isection
), reverse_bytes
);
2664 /* Keep only every `copy_byte'th byte in MEMHUNK. */
2665 char *from
= (char *) memhunk
+ copy_byte
;
2667 char *end
= (char *) memhunk
+ size
;
2669 for (; from
< end
; from
+= interleave
)
2672 size
= (size
+ interleave
- 1 - copy_byte
) / interleave
;
2673 osection
->lma
/= interleave
;
2676 if (!bfd_set_section_contents (obfd
, osection
, memhunk
, 0, size
))
2679 bfd_nonfatal_message (NULL
, obfd
, osection
, NULL
);
2684 else if (p
!= NULL
&& p
->set_flags
&& (p
->flags
& SEC_HAS_CONTENTS
) != 0)
2686 void *memhunk
= xmalloc (size
);
2688 /* We don't permit the user to turn off the SEC_HAS_CONTENTS
2689 flag--they can just remove the section entirely and add it
2690 back again. However, we do permit them to turn on the
2691 SEC_HAS_CONTENTS flag, and take it to mean that the section
2692 contents should be zeroed out. */
2694 memset (memhunk
, 0, size
);
2695 if (! bfd_set_section_contents (obfd
, osection
, memhunk
, 0, size
))
2698 bfd_nonfatal_message (NULL
, obfd
, osection
, NULL
);
2705 /* Get all the sections. This is used when --gap-fill or --pad-to is
2709 get_sections (bfd
*obfd ATTRIBUTE_UNUSED
, asection
*osection
, void *secppparg
)
2711 asection
***secppp
= secppparg
;
2713 **secppp
= osection
;
2717 /* Sort sections by VMA. This is called via qsort, and is used when
2718 --gap-fill or --pad-to is used. We force non loadable or empty
2719 sections to the front, where they are easier to ignore. */
2722 compare_section_lma (const void *arg1
, const void *arg2
)
2724 const asection
*const *sec1
= arg1
;
2725 const asection
*const *sec2
= arg2
;
2726 flagword flags1
, flags2
;
2728 /* Sort non loadable sections to the front. */
2729 flags1
= (*sec1
)->flags
;
2730 flags2
= (*sec2
)->flags
;
2731 if ((flags1
& SEC_HAS_CONTENTS
) == 0
2732 || (flags1
& SEC_LOAD
) == 0)
2734 if ((flags2
& SEC_HAS_CONTENTS
) != 0
2735 && (flags2
& SEC_LOAD
) != 0)
2740 if ((flags2
& SEC_HAS_CONTENTS
) == 0
2741 || (flags2
& SEC_LOAD
) == 0)
2745 /* Sort sections by LMA. */
2746 if ((*sec1
)->lma
> (*sec2
)->lma
)
2748 else if ((*sec1
)->lma
< (*sec2
)->lma
)
2751 /* Sort sections with the same LMA by size. */
2752 if (bfd_get_section_size (*sec1
) > bfd_get_section_size (*sec2
))
2754 else if (bfd_get_section_size (*sec1
) < bfd_get_section_size (*sec2
))
2760 /* Mark all the symbols which will be used in output relocations with
2761 the BSF_KEEP flag so that those symbols will not be stripped.
2763 Ignore relocations which will not appear in the output file. */
2766 mark_symbols_used_in_relocations (bfd
*ibfd
, sec_ptr isection
, void *symbolsarg
)
2768 asymbol
**symbols
= symbolsarg
;
2773 /* Ignore an input section with no corresponding output section. */
2774 if (isection
->output_section
== NULL
)
2777 relsize
= bfd_get_reloc_upper_bound (ibfd
, isection
);
2780 /* Do not complain if the target does not support relocations. */
2781 if (relsize
== -1 && bfd_get_error () == bfd_error_invalid_operation
)
2783 bfd_fatal (bfd_get_filename (ibfd
));
2789 relpp
= xmalloc (relsize
);
2790 relcount
= bfd_canonicalize_reloc (ibfd
, isection
, relpp
, symbols
);
2792 bfd_fatal (bfd_get_filename (ibfd
));
2794 /* Examine each symbol used in a relocation. If it's not one of the
2795 special bfd section symbols, then mark it with BSF_KEEP. */
2796 for (i
= 0; i
< relcount
; i
++)
2798 if (*relpp
[i
]->sym_ptr_ptr
!= bfd_com_section_ptr
->symbol
2799 && *relpp
[i
]->sym_ptr_ptr
!= bfd_abs_section_ptr
->symbol
2800 && *relpp
[i
]->sym_ptr_ptr
!= bfd_und_section_ptr
->symbol
)
2801 (*relpp
[i
]->sym_ptr_ptr
)->flags
|= BSF_KEEP
;
2808 /* Write out debugging information. */
2811 write_debugging_info (bfd
*obfd
, void *dhandle
,
2812 long *symcountp ATTRIBUTE_UNUSED
,
2813 asymbol
***symppp ATTRIBUTE_UNUSED
)
2815 if (bfd_get_flavour (obfd
) == bfd_target_ieee_flavour
)
2816 return write_ieee_debugging_info (obfd
, dhandle
);
2818 if (bfd_get_flavour (obfd
) == bfd_target_coff_flavour
2819 || bfd_get_flavour (obfd
) == bfd_target_elf_flavour
)
2821 bfd_byte
*syms
, *strings
;
2822 bfd_size_type symsize
, stringsize
;
2823 asection
*stabsec
, *stabstrsec
;
2826 if (! write_stabs_in_sections_debugging_info (obfd
, dhandle
, &syms
,
2831 flags
= SEC_HAS_CONTENTS
| SEC_READONLY
| SEC_DEBUGGING
;
2832 stabsec
= bfd_make_section_with_flags (obfd
, ".stab", flags
);
2833 stabstrsec
= bfd_make_section_with_flags (obfd
, ".stabstr", flags
);
2835 || stabstrsec
== NULL
2836 || ! bfd_set_section_size (obfd
, stabsec
, symsize
)
2837 || ! bfd_set_section_size (obfd
, stabstrsec
, stringsize
)
2838 || ! bfd_set_section_alignment (obfd
, stabsec
, 2)
2839 || ! bfd_set_section_alignment (obfd
, stabstrsec
, 0))
2841 bfd_nonfatal_message (NULL
, obfd
, NULL
,
2842 _("can't create debugging section"));
2846 /* We can get away with setting the section contents now because
2847 the next thing the caller is going to do is copy over the
2848 real sections. We may someday have to split the contents
2849 setting out of this function. */
2850 if (! bfd_set_section_contents (obfd
, stabsec
, syms
, 0, symsize
)
2851 || ! bfd_set_section_contents (obfd
, stabstrsec
, strings
, 0,
2854 bfd_nonfatal_message (NULL
, obfd
, NULL
,
2855 _("can't set debugging section contents"));
2862 bfd_nonfatal_message (NULL
, obfd
, NULL
,
2863 _("don't know how to write debugging information for %s"),
2864 bfd_get_target (obfd
));
2869 strip_main (int argc
, char *argv
[])
2871 char *input_target
= NULL
;
2872 char *output_target
= NULL
;
2873 bfd_boolean show_version
= FALSE
;
2874 bfd_boolean formats_info
= FALSE
;
2877 struct section_list
*p
;
2878 char *output_file
= NULL
;
2880 while ((c
= getopt_long (argc
, argv
, "I:O:F:K:N:R:o:sSpdgxXHhVvw",
2881 strip_options
, (int *) 0)) != EOF
)
2886 input_target
= optarg
;
2889 output_target
= optarg
;
2892 input_target
= output_target
= optarg
;
2895 p
= find_section_list (optarg
, TRUE
);
2897 sections_removed
= TRUE
;
2900 strip_symbols
= STRIP_ALL
;
2904 case 'd': /* Historic BSD alias for -g. Used by early NetBSD. */
2905 strip_symbols
= STRIP_DEBUG
;
2907 case OPTION_STRIP_UNNEEDED
:
2908 strip_symbols
= STRIP_UNNEEDED
;
2911 add_specific_symbol (optarg
, keep_specific_htab
);
2914 add_specific_symbol (optarg
, strip_specific_htab
);
2917 output_file
= optarg
;
2920 preserve_dates
= TRUE
;
2923 discard_locals
= LOCALS_ALL
;
2926 discard_locals
= LOCALS_START_L
;
2932 show_version
= TRUE
;
2934 case OPTION_FORMATS_INFO
:
2935 formats_info
= TRUE
;
2937 case OPTION_ONLY_KEEP_DEBUG
:
2938 strip_symbols
= STRIP_NONDEBUG
;
2940 case OPTION_KEEP_FILE_SYMBOLS
:
2941 keep_file_symbols
= 1;
2944 /* We've been given a long option. */
2951 strip_usage (stdout
, 0);
2953 strip_usage (stderr
, 1);
2964 print_version ("strip");
2966 /* Default is to strip all symbols. */
2967 if (strip_symbols
== STRIP_UNDEF
2968 && discard_locals
== LOCALS_UNDEF
2969 && htab_elements (strip_specific_htab
) == 0)
2970 strip_symbols
= STRIP_ALL
;
2972 if (output_target
== NULL
)
2973 output_target
= input_target
;
2977 || (output_file
!= NULL
&& (i
+ 1) < argc
))
2978 strip_usage (stderr
, 1);
2980 for (; i
< argc
; i
++)
2982 int hold_status
= status
;
2983 struct stat statbuf
;
2986 if (get_file_size (argv
[i
]) < 1)
2993 /* No need to check the return value of stat().
2994 It has already been checked in get_file_size(). */
2995 stat (argv
[i
], &statbuf
);
2997 if (output_file
== NULL
|| strcmp (argv
[i
], output_file
) == 0)
2998 tmpname
= make_tempname (argv
[i
]);
3000 tmpname
= output_file
;
3002 if (tmpname
== NULL
)
3004 bfd_nonfatal_message (argv
[i
], NULL
, NULL
,
3005 _("could not create temporary file to hold stripped copy"));
3011 copy_file (argv
[i
], tmpname
, input_target
, output_target
);
3015 set_times (tmpname
, &statbuf
);
3016 if (output_file
!= tmpname
)
3017 smart_rename (tmpname
, output_file
? output_file
: argv
[i
],
3019 status
= hold_status
;
3022 unlink_if_ordinary (tmpname
);
3023 if (output_file
!= tmpname
)
3030 /* Set up PE subsystem. */
3033 set_pe_subsystem (const char *s
)
3035 const char *version
, *subsystem
;
3045 { "native", 0, IMAGE_SUBSYSTEM_NATIVE
},
3046 { "windows", 0, IMAGE_SUBSYSTEM_WINDOWS_GUI
},
3047 { "console", 0, IMAGE_SUBSYSTEM_WINDOWS_CUI
},
3048 { "posix", 0, IMAGE_SUBSYSTEM_POSIX_CUI
},
3049 { "wince", 0, IMAGE_SUBSYSTEM_WINDOWS_CE_GUI
},
3050 { "efi-app", 1, IMAGE_SUBSYSTEM_EFI_APPLICATION
},
3051 { "efi-bsd", 1, IMAGE_SUBSYSTEM_EFI_BOOT_SERVICE_DRIVER
},
3052 { "efi-rtd", 1, IMAGE_SUBSYSTEM_EFI_RUNTIME_DRIVER
},
3053 { "sal-rtd", 1, IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER
},
3054 { "xbox", 0, IMAGE_SUBSYSTEM_XBOX
}
3060 /* Check for the presence of a version number. */
3061 version
= strchr (s
, ':');
3062 if (version
== NULL
)
3066 int len
= version
- s
;
3070 version
= copy
+ 1 + len
;
3071 pe_major_subsystem_version
= strtoul (version
, ©
, 0);
3073 pe_minor_subsystem_version
= strtoul (copy
+ 1, ©
, 0);
3075 non_fatal (_("%s: bad version in PE subsystem"), s
);
3078 /* Check for numeric subsystem. */
3079 value
= (short) strtol (subsystem
, ©
, 0);
3082 for (i
= 0; i
< ARRAY_SIZE (v
); i
++)
3083 if (v
[i
].value
== value
)
3085 pe_subsystem
= value
;
3086 set_def
= v
[i
].set_def
;
3092 /* Search for subsystem by name. */
3093 for (i
= 0; i
< ARRAY_SIZE (v
); i
++)
3094 if (strcmp (subsystem
, v
[i
].name
) == 0)
3096 pe_subsystem
= v
[i
].value
;
3097 set_def
= v
[i
].set_def
;
3105 fatal (_("unknown PE subsystem: %s"), s
);
3110 if (pe_file_alignment
== (bfd_vma
) -1)
3111 pe_file_alignment
= PE_DEF_FILE_ALIGNMENT
;
3112 if (pe_section_alignment
== (bfd_vma
) -1)
3113 pe_section_alignment
= PE_DEF_SECTION_ALIGNMENT
;
3118 /* Convert EFI target to PEI target. */
3121 convert_efi_target (char *efi
)
3127 if (strcmp (efi
+ 4, "ia32") == 0)
3129 /* Change ia32 to i386. */
3134 else if (strcmp (efi
+ 4, "x86_64") == 0)
3136 /* Change x86_64 to x86-64. */
3142 copy_main (int argc
, char *argv
[])
3144 char * binary_architecture
= NULL
;
3145 char *input_filename
= NULL
;
3146 char *output_filename
= NULL
;
3148 char *input_target
= NULL
;
3149 char *output_target
= NULL
;
3150 bfd_boolean show_version
= FALSE
;
3151 bfd_boolean change_warn
= TRUE
;
3152 bfd_boolean formats_info
= FALSE
;
3154 struct section_list
*p
;
3155 struct stat statbuf
;
3157 while ((c
= getopt_long (argc
, argv
, "b:B:i:I:j:K:N:s:O:d:F:L:G:R:SpgxXHhVvW:w",
3158 copy_options
, (int *) 0)) != EOF
)
3163 copy_byte
= atoi (optarg
);
3165 fatal (_("byte number must be non-negative"));
3169 binary_architecture
= optarg
;
3173 interleave
= atoi (optarg
);
3175 fatal (_("interleave must be positive"));
3179 case 's': /* "source" - 'I' is preferred */
3180 input_target
= optarg
;
3184 case 'd': /* "destination" - 'O' is preferred */
3185 output_target
= optarg
;
3189 input_target
= output_target
= optarg
;
3193 p
= find_section_list (optarg
, TRUE
);
3195 fatal (_("%s both copied and removed"), optarg
);
3197 sections_copied
= TRUE
;
3201 p
= find_section_list (optarg
, TRUE
);
3203 fatal (_("%s both copied and removed"), optarg
);
3205 sections_removed
= TRUE
;
3209 strip_symbols
= STRIP_ALL
;
3213 strip_symbols
= STRIP_DEBUG
;
3216 case OPTION_STRIP_UNNEEDED
:
3217 strip_symbols
= STRIP_UNNEEDED
;
3220 case OPTION_ONLY_KEEP_DEBUG
:
3221 strip_symbols
= STRIP_NONDEBUG
;
3224 case OPTION_KEEP_FILE_SYMBOLS
:
3225 keep_file_symbols
= 1;
3228 case OPTION_ADD_GNU_DEBUGLINK
:
3229 gnu_debuglink_filename
= optarg
;
3233 add_specific_symbol (optarg
, keep_specific_htab
);
3237 add_specific_symbol (optarg
, strip_specific_htab
);
3240 case OPTION_STRIP_UNNEEDED_SYMBOL
:
3241 add_specific_symbol (optarg
, strip_unneeded_htab
);
3245 add_specific_symbol (optarg
, localize_specific_htab
);
3248 case OPTION_GLOBALIZE_SYMBOL
:
3249 add_specific_symbol (optarg
, globalize_specific_htab
);
3253 add_specific_symbol (optarg
, keepglobal_specific_htab
);
3257 add_specific_symbol (optarg
, weaken_specific_htab
);
3261 preserve_dates
= TRUE
;
3269 discard_locals
= LOCALS_ALL
;
3273 discard_locals
= LOCALS_START_L
;
3281 show_version
= TRUE
;
3284 case OPTION_FORMATS_INFO
:
3285 formats_info
= TRUE
;
3292 case OPTION_ADD_SECTION
:
3296 struct section_add
*pa
;
3301 s
= strchr (optarg
, '=');
3304 fatal (_("bad format for %s"), "--add-section");
3306 size
= get_file_size (s
+ 1);
3313 pa
= xmalloc (sizeof (struct section_add
));
3316 name
= xmalloc (len
+ 1);
3317 strncpy (name
, optarg
, len
);
3321 pa
->filename
= s
+ 1;
3323 pa
->contents
= xmalloc (size
);
3325 f
= fopen (pa
->filename
, FOPEN_RB
);
3328 fatal (_("cannot open: %s: %s"),
3329 pa
->filename
, strerror (errno
));
3331 if (fread (pa
->contents
, 1, pa
->size
, f
) == 0
3333 fatal (_("%s: fread failed"), pa
->filename
);
3337 pa
->next
= add_sections
;
3342 case OPTION_CHANGE_START
:
3343 change_start
= parse_vma (optarg
, "--change-start");
3346 case OPTION_CHANGE_SECTION_ADDRESS
:
3347 case OPTION_CHANGE_SECTION_LMA
:
3348 case OPTION_CHANGE_SECTION_VMA
:
3353 char *option
= NULL
;
3355 enum change_action what
= CHANGE_IGNORE
;
3359 case OPTION_CHANGE_SECTION_ADDRESS
:
3360 option
= "--change-section-address";
3362 case OPTION_CHANGE_SECTION_LMA
:
3363 option
= "--change-section-lma";
3365 case OPTION_CHANGE_SECTION_VMA
:
3366 option
= "--change-section-vma";
3370 s
= strchr (optarg
, '=');
3373 s
= strchr (optarg
, '+');
3376 s
= strchr (optarg
, '-');
3378 fatal (_("bad format for %s"), option
);
3383 name
= xmalloc (len
+ 1);
3384 strncpy (name
, optarg
, len
);
3387 p
= find_section_list (name
, TRUE
);
3389 val
= parse_vma (s
+ 1, option
);
3393 case '=': what
= CHANGE_SET
; break;
3394 case '-': val
= - val
; /* Drop through. */
3395 case '+': what
= CHANGE_MODIFY
; break;
3400 case OPTION_CHANGE_SECTION_ADDRESS
:
3401 p
->change_vma
= what
;
3405 case OPTION_CHANGE_SECTION_LMA
:
3406 p
->change_lma
= what
;
3410 case OPTION_CHANGE_SECTION_VMA
:
3411 p
->change_vma
= what
;
3418 case OPTION_CHANGE_ADDRESSES
:
3419 change_section_address
= parse_vma (optarg
, "--change-addresses");
3420 change_start
= change_section_address
;
3423 case OPTION_CHANGE_WARNINGS
:
3427 case OPTION_CHANGE_LEADING_CHAR
:
3428 change_leading_char
= TRUE
;
3431 case OPTION_DEBUGGING
:
3432 convert_debugging
= TRUE
;
3435 case OPTION_GAP_FILL
:
3437 bfd_vma gap_fill_vma
;
3439 gap_fill_vma
= parse_vma (optarg
, "--gap-fill");
3440 gap_fill
= (bfd_byte
) gap_fill_vma
;
3441 if ((bfd_vma
) gap_fill
!= gap_fill_vma
)
3445 sprintf_vma (buff
, gap_fill_vma
);
3447 non_fatal (_("Warning: truncating gap-fill from 0x%s to 0x%x"),
3450 gap_fill_set
= TRUE
;
3454 case OPTION_NO_CHANGE_WARNINGS
:
3455 change_warn
= FALSE
;
3459 pad_to
= parse_vma (optarg
, "--pad-to");
3463 case OPTION_REMOVE_LEADING_CHAR
:
3464 remove_leading_char
= TRUE
;
3467 case OPTION_REDEFINE_SYM
:
3469 /* Push this redefinition onto redefine_symbol_list. */
3473 const char *nextarg
;
3474 char *source
, *target
;
3476 s
= strchr (optarg
, '=');
3478 fatal (_("bad format for %s"), "--redefine-sym");
3481 source
= xmalloc (len
+ 1);
3482 strncpy (source
, optarg
, len
);
3486 len
= strlen (nextarg
);
3487 target
= xmalloc (len
+ 1);
3488 strcpy (target
, nextarg
);
3490 redefine_list_append ("--redefine-sym", source
, target
);
3497 case OPTION_REDEFINE_SYMS
:
3498 add_redefine_syms_file (optarg
);
3501 case OPTION_SET_SECTION_FLAGS
:
3507 s
= strchr (optarg
, '=');
3509 fatal (_("bad format for %s"), "--set-section-flags");
3512 name
= xmalloc (len
+ 1);
3513 strncpy (name
, optarg
, len
);
3516 p
= find_section_list (name
, TRUE
);
3518 p
->set_flags
= TRUE
;
3519 p
->flags
= parse_flags (s
+ 1);
3523 case OPTION_RENAME_SECTION
:
3526 const char *eq
, *fl
;
3531 eq
= strchr (optarg
, '=');
3533 fatal (_("bad format for %s"), "--rename-section");
3537 fatal (_("bad format for %s"), "--rename-section");
3539 old_name
= xmalloc (len
+ 1);
3540 strncpy (old_name
, optarg
, len
);
3544 fl
= strchr (eq
, ',');
3547 flags
= parse_flags (fl
+ 1);
3557 fatal (_("bad format for %s"), "--rename-section");
3559 new_name
= xmalloc (len
+ 1);
3560 strncpy (new_name
, eq
, len
);
3563 add_section_rename (old_name
, new_name
, flags
);
3567 case OPTION_SET_START
:
3568 set_start
= parse_vma (optarg
, "--set-start");
3569 set_start_set
= TRUE
;
3572 case OPTION_SREC_LEN
:
3573 Chunk
= parse_vma (optarg
, "--srec-len");
3576 case OPTION_SREC_FORCES3
:
3580 case OPTION_STRIP_SYMBOLS
:
3581 add_specific_symbols (optarg
, strip_specific_htab
);
3584 case OPTION_STRIP_UNNEEDED_SYMBOLS
:
3585 add_specific_symbols (optarg
, strip_unneeded_htab
);
3588 case OPTION_KEEP_SYMBOLS
:
3589 add_specific_symbols (optarg
, keep_specific_htab
);
3592 case OPTION_LOCALIZE_HIDDEN
:
3593 localize_hidden
= TRUE
;
3596 case OPTION_LOCALIZE_SYMBOLS
:
3597 add_specific_symbols (optarg
, localize_specific_htab
);
3600 case OPTION_LONG_SECTION_NAMES
:
3601 if (!strcmp ("enable", optarg
))
3602 long_section_names
= ENABLE
;
3603 else if (!strcmp ("disable", optarg
))
3604 long_section_names
= DISABLE
;
3605 else if (!strcmp ("keep", optarg
))
3606 long_section_names
= KEEP
;
3608 fatal (_("unknown long section names option '%s'"), optarg
);
3611 case OPTION_GLOBALIZE_SYMBOLS
:
3612 add_specific_symbols (optarg
, globalize_specific_htab
);
3615 case OPTION_KEEPGLOBAL_SYMBOLS
:
3616 add_specific_symbols (optarg
, keepglobal_specific_htab
);
3619 case OPTION_WEAKEN_SYMBOLS
:
3620 add_specific_symbols (optarg
, weaken_specific_htab
);
3623 case OPTION_ALT_MACH_CODE
:
3624 use_alt_mach_code
= strtoul (optarg
, NULL
, 0);
3625 if (use_alt_mach_code
== 0)
3626 fatal (_("unable to parse alternative machine code"));
3629 case OPTION_PREFIX_SYMBOLS
:
3630 prefix_symbols_string
= optarg
;
3633 case OPTION_PREFIX_SECTIONS
:
3634 prefix_sections_string
= optarg
;
3637 case OPTION_PREFIX_ALLOC_SECTIONS
:
3638 prefix_alloc_sections_string
= optarg
;
3641 case OPTION_READONLY_TEXT
:
3642 bfd_flags_to_set
|= WP_TEXT
;
3643 bfd_flags_to_clear
&= ~WP_TEXT
;
3646 case OPTION_WRITABLE_TEXT
:
3647 bfd_flags_to_clear
|= WP_TEXT
;
3648 bfd_flags_to_set
&= ~WP_TEXT
;
3652 bfd_flags_to_set
|= D_PAGED
;
3653 bfd_flags_to_clear
&= ~D_PAGED
;
3657 bfd_flags_to_clear
|= D_PAGED
;
3658 bfd_flags_to_set
&= ~D_PAGED
;
3661 case OPTION_EXTRACT_SYMBOL
:
3662 extract_symbol
= TRUE
;
3665 case OPTION_REVERSE_BYTES
:
3667 int prev
= reverse_bytes
;
3669 reverse_bytes
= atoi (optarg
);
3670 if ((reverse_bytes
<= 0) || ((reverse_bytes
% 2) != 0))
3671 fatal (_("number of bytes to reverse must be positive and even"));
3673 if (prev
&& prev
!= reverse_bytes
)
3674 non_fatal (_("Warning: ignoring previous --reverse-bytes value of %d"),
3679 case OPTION_FILE_ALIGNMENT
:
3680 pe_file_alignment
= parse_vma (optarg
, "--file-alignment");
3686 pe_heap_reserve
= strtoul (optarg
, &end
, 0);
3688 || (*end
!= '.' && *end
!= '\0'))
3689 non_fatal (_("%s: invalid reserve value for --heap"),
3691 else if (*end
!= '\0')
3693 pe_heap_commit
= strtoul (end
+ 1, &end
, 0);
3695 non_fatal (_("%s: invalid commit value for --heap"),
3701 case OPTION_IMAGE_BASE
:
3702 pe_image_base
= parse_vma (optarg
, "--image-base");
3705 case OPTION_SECTION_ALIGNMENT
:
3706 pe_section_alignment
= parse_vma (optarg
,
3707 "--section-alignment");
3710 case OPTION_SUBSYSTEM
:
3711 set_pe_subsystem (optarg
);
3717 pe_stack_reserve
= strtoul (optarg
, &end
, 0);
3719 || (*end
!= '.' && *end
!= '\0'))
3720 non_fatal (_("%s: invalid reserve value for --stack"),
3722 else if (*end
!= '\0')
3724 pe_stack_commit
= strtoul (end
+ 1, &end
, 0);
3726 non_fatal (_("%s: invalid commit value for --stack"),
3733 /* We've been given a long option. */
3738 copy_usage (stdout
, 0);
3741 copy_usage (stderr
, 1);
3752 print_version ("objcopy");
3754 if (copy_byte
>= interleave
)
3755 fatal (_("byte number must be less than interleave"));
3757 if (optind
== argc
|| optind
+ 2 < argc
)
3758 copy_usage (stderr
, 1);
3760 input_filename
= argv
[optind
];
3761 if (optind
+ 1 < argc
)
3762 output_filename
= argv
[optind
+ 1];
3764 /* Default is to strip no symbols. */
3765 if (strip_symbols
== STRIP_UNDEF
&& discard_locals
== LOCALS_UNDEF
)
3766 strip_symbols
= STRIP_NONE
;
3768 if (output_target
== NULL
)
3769 output_target
= input_target
;
3771 /* Convert input EFI target to PEI target. */
3772 if (input_target
!= NULL
3773 && strncmp (input_target
, "efi-", 4) == 0)
3777 efi
= xstrdup (output_target
+ 4);
3778 if (strncmp (efi
, "bsdrv-", 6) == 0
3779 || strncmp (efi
, "rtdrv-", 6) == 0)
3781 else if (strncmp (efi
, "app-", 4) != 0)
3782 fatal (_("unknown input EFI target: %s"), input_target
);
3785 convert_efi_target (efi
);
3788 /* Convert output EFI target to PEI target. */
3789 if (output_target
!= NULL
3790 && strncmp (output_target
, "efi-", 4) == 0)
3794 efi
= xstrdup (output_target
+ 4);
3795 if (strncmp (efi
, "app-", 4) == 0)
3797 if (pe_subsystem
== -1)
3798 pe_subsystem
= IMAGE_SUBSYSTEM_EFI_APPLICATION
;
3800 else if (strncmp (efi
, "bsdrv-", 6) == 0)
3802 if (pe_subsystem
== -1)
3803 pe_subsystem
= IMAGE_SUBSYSTEM_EFI_BOOT_SERVICE_DRIVER
;
3806 else if (strncmp (efi
, "rtdrv-", 6) == 0)
3808 if (pe_subsystem
== -1)
3809 pe_subsystem
= IMAGE_SUBSYSTEM_EFI_RUNTIME_DRIVER
;
3813 fatal (_("unknown output EFI target: %s"), output_target
);
3815 if (pe_file_alignment
== (bfd_vma
) -1)
3816 pe_file_alignment
= PE_DEF_FILE_ALIGNMENT
;
3817 if (pe_section_alignment
== (bfd_vma
) -1)
3818 pe_section_alignment
= PE_DEF_SECTION_ALIGNMENT
;
3820 output_target
= efi
;
3821 convert_efi_target (efi
);
3824 if (binary_architecture
!= NULL
)
3826 if (input_target
&& strcmp (input_target
, "binary") == 0)
3828 const bfd_arch_info_type
* temp_arch_info
;
3830 temp_arch_info
= bfd_scan_arch (binary_architecture
);
3832 if (temp_arch_info
!= NULL
)
3834 bfd_external_binary_architecture
= temp_arch_info
->arch
;
3835 bfd_external_machine
= temp_arch_info
->mach
;
3838 fatal (_("architecture %s unknown"), binary_architecture
);
3842 non_fatal (_("Warning: input target 'binary' required for binary architecture parameter."));
3843 non_fatal (_(" Argument %s ignored"), binary_architecture
);
3848 if (stat (input_filename
, & statbuf
) < 0)
3849 fatal (_("warning: could not locate '%s'. System error message: %s"),
3850 input_filename
, strerror (errno
));
3852 /* If there is no destination file, or the source and destination files
3853 are the same, then create a temp and rename the result into the input. */
3854 if (output_filename
== NULL
|| strcmp (input_filename
, output_filename
) == 0)
3855 tmpname
= make_tempname (input_filename
);
3857 tmpname
= output_filename
;
3859 if (tmpname
== NULL
)
3860 fatal (_("warning: could not create temporary file whilst copying '%s', (error: %s)"),
3861 input_filename
, strerror (errno
));
3863 copy_file (input_filename
, tmpname
, input_target
, output_target
);
3867 set_times (tmpname
, &statbuf
);
3868 if (tmpname
!= output_filename
)
3869 smart_rename (tmpname
, input_filename
, preserve_dates
);
3872 unlink_if_ordinary (tmpname
);
3876 for (p
= change_sections
; p
!= NULL
; p
= p
->next
)
3880 if (p
->change_vma
!= CHANGE_IGNORE
)
3884 sprintf_vma (buff
, p
->vma_val
);
3886 /* xgettext:c-format */
3887 non_fatal (_("%s %s%c0x%s never used"),
3888 "--change-section-vma",
3890 p
->change_vma
== CHANGE_SET
? '=' : '+',
3894 if (p
->change_lma
!= CHANGE_IGNORE
)
3898 sprintf_vma (buff
, p
->lma_val
);
3900 /* xgettext:c-format */
3901 non_fatal (_("%s %s%c0x%s never used"),
3902 "--change-section-lma",
3904 p
->change_lma
== CHANGE_SET
? '=' : '+',
3915 main (int argc
, char *argv
[])
3917 #if defined (HAVE_SETLOCALE) && defined (HAVE_LC_MESSAGES)
3918 setlocale (LC_MESSAGES
, "");
3920 #if defined (HAVE_SETLOCALE)
3921 setlocale (LC_CTYPE
, "");
3923 bindtextdomain (PACKAGE
, LOCALEDIR
);
3924 textdomain (PACKAGE
);
3926 program_name
= argv
[0];
3927 xmalloc_set_program_name (program_name
);
3929 START_PROGRESS (program_name
, 0);
3931 expandargv (&argc
, &argv
);
3933 strip_symbols
= STRIP_UNDEF
;
3934 discard_locals
= LOCALS_UNDEF
;
3937 set_default_bfd_target ();
3941 int i
= strlen (program_name
);
3942 #ifdef HAVE_DOS_BASED_FILE_SYSTEM
3943 /* Drop the .exe suffix, if any. */
3944 if (i
> 4 && FILENAME_CMP (program_name
+ i
- 4, ".exe") == 0)
3947 program_name
[i
] = '\0';
3950 is_strip
= (i
>= 5 && FILENAME_CMP (program_name
+ i
- 5, "strip") == 0);
3953 create_symbol_htabs ();
3956 strip_main (argc
, argv
);
3958 copy_main (argc
, argv
);
3960 END_PROGRESS (program_name
);