configure.in

   1 ##############################################################################
   2
   3 ## This file is a shell script fragment that supplies the information
   4 ## necessary to tailor a template configure script into the configure
   5 ## script appropriate for this directory.  For more information, check
   6 ## any existing configure script.
   7
   8 ## Be warned, there are two types of configure.in files.  There are those
   9 ## used by Autoconf, which are macros which are expanded into a configure
  10 ## script by autoconf.  The other sort, of which this is one, is executed
  11 ## by Cygnus configure.
  12
  13 ## For more information on these two systems, check out the documentation
  14 ## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
  15
  16 ##############################################################################
  17
  18 ### To add a new directory to the tree, first choose whether it is a target
  19 ### or a host dependent tool.  Then put it into the appropriate list
  20 ### (library or tools, host or target), doing a dependency sort.  For
  21 ### example, gdb requires that byacc (or bison) be built first, so it is in
  22 ### the ${host_tools} list after byacc and bison.
  23
  24
  25 # these libraries are used by various programs built for the host environment
  26 #
  27 host_libs="mmalloc libiberty opcodes bfd readline gash tcl tk tclX"
  28
  29 if [ "${enable_gdbgui}" = "yes" ] ; then
  30         host_libs="${host_libs} libgui"
  31 fi
  32
  33 # these tools are built for the host environment
  34 #
  35 host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
  36             prms send-pr gprof gdbtest tgas etc expect dejagnu sim
  37             m4 autoconf ispell grep diff rcs cvs fileutils shellutils
  38             textutils wdiff find emacs emacs19 uudecode hello tar gzip indent
  39             recode release sed utils"
  40
  41
  42 # these libraries are built for the target environment, and are built after
  43 # the host libraries and the host tools (which may be a cross compiler)
  44 #
  45 target_libs="libm xiberty libgloss newlib libio librx libstdc++ libg++"
  46
  47
  48 # these tools are built using the target libs, and are intended to run only
  49 # in the target environment
  50 #
  51 # note: any program that *uses* libraries that are in the "target_libs"
  52 # list belongs in this list.  those programs are also very likely
  53 # candidates for the "native_only" list which follows
  54 #
  55 target_tools="examples groff"
  56
  57 ################################################################################
  58
  59 ## These two lists are of directories that are to be removed from the
  60 ## ${configdirs} list for either cross-compilations or for native-
  61 ## compilations.  For example, it doesn't make that much sense to
  62 ## cross-compile Emacs, nor is it terribly useful to compile xiberty in
  63 ## a native environment.
  64
  65 # directories to be built in the native environment only
  66 #
  67 native_only="autoconf cvs emacs emacs19 fileutils find grep groff gzip hello
  68              indent ispell m4 rcs recode sed shellutils tar textutils gash
  69              uudecode wdiff gprof"
  70
  71 # directories to be built in a cross environment only
  72 #
  73 cross_only="xiberty libgloss newlib"
  74
  75 ## All tools belong in one of the four categories, and are assigned above
  76 ## We assign ${configdirs} this way to remove all embedded newlines.  This
  77 ## is important because configure will choke if they ever get through.
  78 #
  79 configdirs=`echo ${host_libs} ${host_tools} ${target_libs} ${target_tools}`
  80
  81 ################################################################################
  82
  83 srctrigger=move-if-change
  84 srcname="gnu development package"
  85
  86 # This gets set non-empty for some net releases of packages.
  87 appdirs=""
  88
  89 # per-host:
  90
  91 # Work in distributions that contain no compiler tools, like Autoconf.
  92 if [ -d ${srcdir}/config ]; then
  93 case "${host}" in
  94   m68k-hp-hpux*)          host_makefile_frag=config/mh-hp300 ;;
  95   m68k-apollo-sysv*)      host_makefile_frag=config/mh-apollo68 ;;
  96   m68k-apollo-bsd*)       host_makefile_frag=config/mh-a68bsd ;;
  97   m88k-dg-dgux*)          host_makefile_frag=config/mh-dgux ;;
  98   m88k-harris-cxux*)      host_makefile_frag=config/mh-cxux ;;
  99   m88k-motorola-sysv*)    host_makefile_frag=config/mh-delta88;;
 100   mips*-dec-ultrix*)      host_makefile_frag=config/mh-decstation ;;
 101   mips*-sgi-irix[56]*)    host_makefile_frag=config/mh-irix5 ;;
 102   mips*-sgi-irix4*)       host_makefile_frag=config/mh-irix4 ;;
 103   mips*-sgi-irix3*)       host_makefile_frag=config/mh-sysv ;;
 104   mips*-*-sysv4*)         host_makefile_frag=config/mh-sysv4 ;;
 105   mips*-*-sysv*)          host_makefile_frag=config/mh-riscos ;;
 106   i[345]86-ncr-sysv4.3)   host_makefile_frag=config/mh-ncrsvr43 ;;
 107   i[345]86-ncr-sysv4*)    host_makefile_frag=config/mh-ncr3000 ;;
 108   i[345]86-*-sco*)        host_makefile_frag=config/mh-sco ;;
 109   i[345]86-*-isc*)        host_makefile_frag=config/mh-sysv ;;
 110   i[345]86-*-linux*)      host_makefile_frag=config/mh-linux ;;
 111   i[345]86-*-solaris2*)   host_makefile_frag=config/mh-sysv4 ;;
 112   i[345]86-*-aix*)        host_makefile_frag=config/mh-aix386 ;;
 113   i[345]86-*-go32*)       host_makefile_frag=config/mh-go32 ;;
 114   i[345]86-*-win32)       host_makefile_frag=config/mh-i386win32 ;;
 115   vax-*-ultrix2*)         host_makefile_frag=config/mh-vaxult2 ;;
 116   *-ibm-aix*)             host_makefile_frag=config/mh-aix ;;
 117   *-bull-bosx*)           host_makefile_frag=config/mh-aix ;;
 118   *-*-solaris2*)          host_makefile_frag=config/mh-solaris ;;
 119   m68k-sun-*)             host_makefile_frag=config/mh-sun3 ;;
 120   *-sun-*)                host_makefile_frag=config/mh-sun ;;
 121   *-hp-hpux[78]*)         host_makefile_frag=config/mh-hpux8 ;;
 122   *-hp-hpux*)             host_makefile_frag=config/mh-hpux ;;
 123   *-*-hiux*)              host_makefile_frag=config/mh-hpux ;;
 124   rs6000-*-lynxos*)       host_makefile_frag=config/mh-lynxrs6k ;;
 125   *-*-lynxos*)            host_makefile_frag=config/mh-lynxos ;;
 126   *-*-sysv4*)             host_makefile_frag=config/mh-sysv4 ;;
 127   *-*-sysv*)              host_makefile_frag=config/mh-sysv ;;
 128 esac
 129 fi
 130
 131 # The Solaris /usr/ucb/cc compiler does not appear to work.
 132 case "${host}" in
 133   sparc-sun-solaris2*)
 134       if [ "`/usr/bin/which ${CC-cc}`" = "/usr/ucb/cc" ] ; then
 135           could_use=
 136           [ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
 137           if [ -d /opt/cygnus/bin ] ; then
 138               if [ "$could_use" == "" ] ; then
 139                   could_use="/opt/cygnus/bin"
 140               else
 141                   could_use="$could_use or /opt/cygnus/bin"
 142               fi
 143           fi
 144         if [ "$could_use" = "" ] ; then
 145             echo "Warning: compilation may fail because you're using"
 146             echo "/usr/ucb/cc.  You should change your PATH or CC "
 147             echo "variable and rerun configure."
 148         else
 149             echo "Warning: compilation may fail because you're using"
 150             echo "/usr/ucb/cc, when you should use the C compiler from"
 151             echo "$could_use.  You should change your"
 152             echo "PATH or CC variable and rerun configure."
 153         fi
 154       fi
 155   ;;
 156 esac
 157
 158 # We default to --with-shared on platforms where -fpic is meaningless.
 159 # Well, we don't yet, but we will.
 160 if false && [ "${host}" = "${target}" ] && [ x${enable_shared} = x ]; then
 161   case "${target}" in
 162     alpha-dec-osf*)     enable_shared=yes ;;
 163     mips-sgi-irix5*)    enable_shared=yes ;;
 164     *)                  enable_shared=no ;;
 165   esac
 166 fi
 167
 168 if [ x${enable_shared} = xyes ]; then
 169   waugh=
 170   case "${host}" in
 171     hppa*)              waugh=config/mh-papic ;;
 172     i[345]86-*)         waugh=config/mh-x86pic ;;
 173     *)                  waugh=config/mh-${host_cpu}pic ;;
 174   esac
 175   if [ -f ${srcdir}/${waugh} ]; then
 176     if [ -n "${host_makefile_frag}" ] ; then
 177       cat ${srcdir}/${host_makefile_frag} > mh-frag
 178       cat ${srcdir}/${waugh} >> mh-frag
 179       host_makefile_frag=mh-frag
 180     else
 181       host_makefile_frag=${waugh}
 182     fi
 183   fi
 184 fi
 185
 186 # per-target:
 187
 188 case "${target}" in
 189   v810*)                target_makefile_frag=config/mt-v810 ;;
 190   i[345]86-*-netware*)  target_makefile_frag=config/mt-netware ;;
 191   powerpc-*-netware*)   target_makefile_frag=config/mt-netware ;;
 192 esac
 193
 194 gasdir=gas
 195 use_gnu_ld=
 196 use_gnu_as=
 197
 198 # some tools are so dependent upon X11 that if we're not building with X,
 199 # it's not even worth trying to configure, much less build, that tool.
 200
 201 case ${with_x} in
 202   yes | "")  # the default value for this tree is that X11 is available
 203         ;;
 204   no)
 205         configdirs=`echo " ${configdirs} " | sed -e 's/ tk / /;/ gash / /'`
 206         ;;
 207   *)
 208         echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
 209         ;;
 210 esac
 211
 212 # Some tools are only suitable for building in a "native" situation.
 213 # Those are added when we have a host==target configuration.  For cross
 214 # toolchains, we add some directories that should only be useful in a
 215 # cross-compiler.
 216
 217 is_cross_compiler=
 218
 219 if [ x"${host}" = x"${target}" ] ; then
 220         # when doing a native toolchain, don't build the targets
 221         # that are in the 'cross only' list
 222         for i in ${cross_only} ; do
 223           configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
 224         done
 225         is_cross_compiler=no
 226 else
 227         # similarly, don't build the targets in the 'native only'
 228         # list when building a cross compiler
 229         for i in ${native_only} ; do
 230           configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
 231         done
 232         is_cross_compiler=yes
 233 fi
 234
 235 copy_dirs=
 236
 237 # Handle --with-headers=XXX.  The contents of the named directory are
 238 # copied to $(tooldir)/include.
 239 if [ x"${with_headers}" != x ]; then
 240   if [ x${is_cross_compiler} = xno ]; then
 241     echo 1>&2 '***' --with-headers is only supported when cross compiling
 242     exit 1
 243   fi
 244   case "${exec_prefixoption}" in
 245   "") x=${prefix} ;;
 246   *) x=${exec_prefix} ;;
 247   esac
 248   copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/include"
 249 fi
 250
 251 # Handle --with-libs=XXX.  Multiple directories are permitted.  The
 252 # contents are copied to $(tooldir)/lib.
 253 if [ x"${with_libs}" != x ]; then
 254   if [ x${is_cross_compiler} = xno ]; then
 255     echo 1>&2 '***' --with-libs is only supported when cross compiling
 256     exit 1
 257   fi
 258   # Copy the libraries in reverse order, so that files in the first named
 259   # library override files in subsequent libraries.
 260   case "${exec_prefixoption}" in
 261   "") x=${prefix} ;;
 262   *) x=${exec_prefix} ;;
 263   esac
 264   for l in ${with_libs}; do
 265     copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
 266   done
 267 fi
 268
 269 # If both --with-headers and --with-libs are specified, default to
 270 # --without-newlib.
 271 if [ x"${with_headers}" != x ] && [ x"${with_libs}" != x ]; then
 272   if [ x"${with_newlib}" = x ]; then
 273     with_newlib=no
 274   fi
 275 fi
 276
 277 # Recognize --with-newlib/--without-newlib.
 278 if [ x${with_newlib} = xno ]; then
 279   configdirs=`echo " ${configdirs} " | sed -e 's/ newlib / /'`
 280 elif [ x${with_newlib} = xyes ]; then
 281   configdirs=`echo " ${configdirs} " | sed -e 's/ newlib / /'`
 282   configdirs="${configdirs} newlib"
 283 fi
 284
 285 # Handle ${copy_dirs}
 286 set fnord ${copy_dirs}
 287 shift
 288 while [ $# != 0 ]; do
 289   if [ -f $2/COPIED ] && [ x"`cat $2/COPIED`" = x"$1" ]; then
 290     :
 291   else
 292     echo Copying $1 to $2
 293
 294     # Use the install script to create the directory and all required
 295     # parent directories.
 296     if [ -d $2 ]; then
 297       :
 298     else
 299       echo >config.temp
 300       ${srcdir}/install.sh -c -m 644 config.temp $2/COPIED
 301     fi
 302
 303     # Copy the directory, assuming we have tar.
 304     # FIXME: Should we use B in the second tar?  Not all systems support it.
 305     (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
 306
 307     # It is the responsibility of the user to correctly adjust all
 308     # symlinks.  If somebody can figure out how to handle them correctly
 309     # here, feel free to add the code.
 310
 311     echo $1 > $2/COPIED
 312   fi
 313   shift; shift
 314 done
 315
 316 # Configure extra directories which are host specific
 317
 318 case "${host}" in
 319   i[345]86-*-go32*)
 320           configdirs="$configdirs dosrel" ;;
 321 esac
 322
 323 # Remove more programs from consideration, based on the host or
 324 # target this usually means that a port of the program doesn't
 325 # exist yet.
 326
 327 noconfigdirs=""
 328
 329 case "${host}" in
 330   i[345]86-*-vsta)
 331     noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
 332     ;;
 333   i[345]86-*-go32)
 334     noconfigdirs="tcl tk expect deja-gnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
 335         ;;
 336   i[345]86-*-win32)
 337     noconfigdirs="tcl tk expect deja-gnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff gdb"
 338     ;;
 339 esac
 340
 341
 342 case "${target}" in
 343   *-*-netware)
 344     noconfigdirs="$noconfigdirs libg++ libstdc++ librx newlib xiberty"
 345     ;;
 346   alpha-dec-osf*)
 347     # ld works, but does not support shared libraries.  emacs doesn't
 348     # work.  newlib is not 64 bit ready.  I'm not sure about emacs19,
 349     # fileutils or grep.
 350     noconfigdirs="$noconfigdirs ld emacs emacs19 fileutils grep newlib"
 351     ;;
 352   alpha*-*-*)
 353     # newlib is not 64 bit ready
 354     noconfigdirs="$noconfigdirs newlib"
 355     ;;
 356 # start-sanitize-arc
 357   arc-*-*)
 358     ;;
 359 # end-sanitize-arc
 360 # start-sanitize-psion
 361   arm-*-pe*)
 362     # Leave g++ for later.
 363     noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
 364     ;;
 365 # end-sanitize-psion
 366   arm-*-riscix*)
 367     noconfigdirs="$noconfigdirs ld"
 368     ;;
 369   h8300*-*-* | \
 370   h8500-*-*)
 371     noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
 372     ;;
 373   hppa*-*-*elf* | \
 374   hppa*-*-lites*)
 375     # Do configure ld/binutils/gas for this case.
 376     ;;
 377   hppa*-*-*)
 378     # HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach
 379     # cc is gcc, and on any system a user should be able to link cc to
 380     # whatever they want.  FIXME, emacs emacs19).
 381     case "${CC}" in
 382         "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
 383         *) ;;
 384     esac
 385     noconfigdirs="$noconfigdirs ld shellutils"
 386     ;;
 387   i[345]86-*-go32)
 388     # add the go32 support tools to the list
 389     # but don't build gdb
 390     configdirs=`echo go32 ${configdirs}`
 391     noconfigdirs="$noconfigdirs gdb libg++ libstdc++ libio librx"
 392     ;;
 393
 394   i[345]86-*-win32)
 395     # Can't build gdb for win32 target
 396     noconfigdirs="$noconfigdirs gdb tk"
 397     # but put newlib back
 398     configdirs="$configdirs newlib"
 399     ;;
 400   i[345]86-*-pe)
 401     noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
 402     ;;
 403   i[345]86-*-sco*)
 404     noconfigdirs="$noconfigdirs gprof"
 405     ;;
 406   i[345]86-*-solaris2*)
 407     # The linker does static linking correctly, but the Solaris C library
 408     # has bugs such that some important functions won't work when statically
 409     # linked.  (See man pages for getpwuid, for example.)
 410     noconfigdirs="$noconfigdirs ld"
 411     ;;
 412   i[345]86-*-sysv4*)
 413     # The SYSV4 C compiler doesn't handle Emacs correctly
 414     case "${CC}" in
 415         "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
 416         *) ;;
 417     esac
 418     # but that's okay since emacs doesn't work anyway
 419     noconfigdirs="$noconfigdirs emacs emacs19"
 420     ;;
 421   powerpc-*-aix*)
 422     # copied from rs6000-*-* entry
 423     noconfigdirs="$noconfigdirs gas ld binutils gprof textutils cvs"
 424     ;;
 425   rs6000-*-lynxos*)
 426     # a gcc built textutils will cause the linker to hang on 'join'
 427     # The CVS server code doesn't work on the RS/6000
 428     # Newlib makes problems for libg++ in crosses.
 429     noconfigdirs="$noconfigdirs gas ld newlib gprof textutils cvs"
 430     use_gnu_ld=no
 431     use_gnu_as=no
 432     ;;
 433   rs6000-*-*)
 434     # a gcc built textutils will cause the linker to hang on 'join'
 435     noconfigdirs="$noconfigdirs gas ld binutils gprof textutils"
 436     ;;
 437   m68k-apollo-*)
 438     noconfigdirs="$noconfigdirs ld binutils gprof"
 439     ;;
 440   m68k-*-vxworks5.1)
 441     noconfigdirs="$noconfigdirs newlib"
 442     ;;
 443   mips*-*-irix5*)
 444     # The GNU linker does not support shared libraries.
 445     # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
 446     noconfigdirs="$noconfigdirs ld gprof emacs"
 447     ;;
 448   mips*-dec-bsd*)
 449     noconfigdirs="$noconfigdirs gprof"
 450     ;;
 451   mips*-*-bsd*)
 452     noconfigdirs="$noconfigdirs gprof ld"
 453     ;;
 454   mips*-*-*)
 455     noconfigdirs="$noconfigdirs gprof"
 456     ;;
 457   romp-*-*)
 458     noconfigdirs="bfd binutils ld gas opcodes"
 459     ;;
 460   sh-*-*)
 461     case "${host}" in
 462       i[345]86-*-vsta) ;; # don't add gprof back in
 463       *) configdirs=`echo gprof ${configdirs}` ;;
 464       i[345]86-*-go32) ;; # don't add gprof back in
 465       *) configdirs=`echo gprof ${configdirs}` ;;
 466     esac
 467     ;;
 468   sparc-*-sunos4*)
 469     if [ x${is_cross_compiler} != xno ] ; then
 470            noconfigdirs="$noconfigdirs gdb gdbtest newlib"
 471     else
 472            use_gnu_ld=no
 473     fi
 474     ;;
 475   vax-*-vms)
 476     noconfigdirs="$noconfigdirs bfd binutils gdb ld newlib opcodes"
 477     ;;
 478   vax-*-*)
 479     noconfigdirs="$noconfigdirs newlib"
 480     ;;
 481   *-*-lynxos*)
 482      # Newlib makes problems for libg++ in crosses.
 483      noconfigdirs="$noconfigdirs newlib"
 484      ;;
 485 esac
 486
 487 # Remove the entries in $noconfigdirs from $configdirs.  If we have the
 488 # source for them, add them to $notsupp.
 489 notsupp=""
 490 for dir in . $noconfigdirs ; do
 491   if [ $dir != . ]  && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
 492     configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
 493     if [ -r $srcdir/$dir/configure ] || [ -r $srcdir/$dir/configure.in ]; then
 494       notsupp="$notsupp $dir"
 495     fi
 496   fi
 497 done
 498
 499 # Produce a warning message for the subdirs we can't configure.
 500 # This isn't especially interesting in the Cygnus tree, but in the individual
 501 # FSF releases, it's important to let people know when their machine isn't
 502 # supported by the one or two programs in a package.
 503
 504 if [ -n "${notsupp}" ] && [ -z "${norecursion}" ]; then
 505   # If $appdirs is non-empty, at least one of those directories must still
 506   # be configured, or we error out.  (E.g., if the gas release supports a
 507   # specified target in some subdirs but not the gas subdir, we shouldn't
 508   # pretend that all is well.)
 509   if [ -n "$appdirs" ]; then
 510     for dir in $appdirs ; do
 511       if [ -r $dir/Makefile.in ] && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1 ; then
 512         appdirs=""
 513         break
 514       fi
 515     done
 516     if [ -n "$appdirs" ]; then
 517       echo "*** This configuration is not supported by this package." 1>&2
 518       exit 1
 519     fi
 520   fi
 521   # Okay, some application will build, or we don't care to check.  Still
 522   # notify of subdirs not getting built.
 523   echo "*** This configuration is not supported in the following subdirectories:" 1>&2
 524   echo "    ${notsupp}" 1>&2
 525   echo "    (Any other directories should still work fine.)" 1>&2
 526 fi
 527
 528 # Set with_gnu_as and with_gnu_ld as appropriate.
 529 #
 530 # This is done by determining whether or not the appropriate directory
 531 # is available, and by checking whether or not specific configurations
 532 # have requested that this magic not happen.
 533 #
 534 # The command line options always override the explicit settings in
 535 # configure.in, and the settings in configure.in override this magic.
 536 #
 537 # If the default for a toolchain is to use GNU as and ld, and you don't
 538 # want to do that, then you should use the --without-gnu-as and
 539 # --without-gnu-ld options for the configure script.
 540
 541 if [ x${use_gnu_as} = x ] ; then
 542   if [ x${with_gnu_as} != xno ] && echo " ${configdirs} " | grep " ${gasdir} " > /dev/null 2>&1 && [ -d ${srcdir}/${gasdir} ] ; then
 543     with_gnu_as=yes
 544     withoptions="$withoptions --with-gnu-as"
 545   fi
 546 fi
 547
 548 if [ x${use_gnu_ld} = x ] ; then
 549   if [ x${with_gnu_ld} != xno ] && echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 && [ -d ${srcdir}/ld ] ; then
 550     with_gnu_ld=yes
 551     withoptions="$withoptions --with-gnu-ld"
 552   fi
 553 fi
 554
 555 if [ x${enable_shared} = xyes ]; then
 556   case "${target}" in
 557     hppa*)              target_makefile_frag=config/mt-papic ;;
 558     i[345]86-*)         target_makefile_frag=config/mt-x86pic ;;
 559     *)                  target_makefile_frag=config/mt-${target_cpu}pic ;;
 560   esac
 561 fi
 562
 563 #
 564 # Local Variables:
 565 # fill-column: 131
 566 # End:
 567 #