configure.in

   1 ##############################################################################
   2
   3 ## This file is a shell script fragment that supplies the information
   4 ## necessary to tailor a template configure script into the configure
   5 ## script appropriate for this directory.  For more information, check
   6 ## any existing configure script.
   7
   8 ## Be warned, there are two types of configure.in files.  There are those
   9 ## used by Autoconf, which are macros which are expanded into a configure
  10 ## script by autoconf.  The other sort, of which this is one, is executed
  11 ## by Cygnus configure.
  12
  13 ## For more information on these two systems, check out the documentation
  14 ## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
  15
  16 ##############################################################################
  17
  18 ### To add a new directory to the tree, first choose whether it is a target
  19 ### or a host dependent tool.  Then put it into the appropriate list
  20 ### (library or tools, host or target), doing a dependency sort.  For
  21 ### example, gdb requires that byacc (or bison) be built first, so it is in
  22 ### the ${host_tools} list after byacc and bison.
  23
  24
  25 # these libraries are used by various programs built for the host environment
  26 #
  27 host_libs="mmalloc libiberty opcodes bfd readline gash tcl tk tclX"
  28
  29 if [ "${enable_gdbgui}" = "yes" ] ; then
  30         host_libs="${host_libs} libgui"
  31 fi
  32
  33 # these tools are built for the host environment
  34 #
  35 host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
  36             prms send-pr gprof gdbtest tgas etc expect dejagnu sim
  37             m4 autoconf ispell grep diff rcs cvs fileutils shellutils
  38             textutils wdiff find emacs emacs19 uudecode hello tar gzip indent
  39             recode release sed utils"
  40
  41
  42 # these libraries are built for the target environment, and are built after
  43 # the host libraries and the host tools (which may be a cross compiler)
  44 #
  45 target_libs="xiberty libgloss newlib libio librx libstdc++ libg++"
  46
  47
  48 # these tools are built using the target libs, and are intended to run only
  49 # in the target environment
  50 #
  51 # note: any program that *uses* libraries that are in the "target_libs"
  52 # list belongs in this list.  those programs are also very likely
  53 # candidates for the "native_only" list which follows
  54 #
  55 target_tools="examples groff"
  56
  57 ################################################################################
  58
  59 ## These two lists are of directories that are to be removed from the
  60 ## ${configdirs} list for either cross-compilations or for native-
  61 ## compilations.  For example, it doesn't make that much sense to
  62 ## cross-compile Emacs, nor is it terribly useful to compile xiberty in
  63 ## a native environment.
  64
  65 # directories to be built in the native environment only
  66 #
  67 native_only="autoconf cvs emacs emacs19 fileutils find grep groff gzip hello
  68              indent ispell m4 rcs recode sed shellutils tar textutils gash
  69              uudecode wdiff gprof"
  70
  71 # directories to be built in a cross environment only
  72 #
  73 cross_only="xiberty libgloss newlib"
  74
  75 ## All tools belong in one of the four categories, and are assigned above
  76 ## We assign ${configdirs} this way to remove all embedded newlines.  This
  77 ## is important because configure will choke if they ever get through.
  78 ## ${configdirs} is directories we build using the host tools.
  79 ## ${target_configdirs} is directories we build using the target tools.
  80 #
  81 configdirs=`echo ${host_libs} ${host_tools}`
  82 target_configdirs=`echo ${target_libs} ${target_tools}`
  83
  84 ################################################################################
  85
  86 srctrigger=move-if-change
  87 srcname="gnu development package"
  88
  89 # This gets set non-empty for some net releases of packages.
  90 appdirs=""
  91
  92 # per-host:
  93
  94 # Work in distributions that contain no compiler tools, like Autoconf.
  95 if [ -d ${srcdir}/config ]; then
  96 case "${host}" in
  97   m68k-hp-hpux*)          host_makefile_frag=config/mh-hp300 ;;
  98   m68k-apollo-sysv*)      host_makefile_frag=config/mh-apollo68 ;;
  99   m68k-apollo-bsd*)       host_makefile_frag=config/mh-a68bsd ;;
 100   m88k-dg-dgux*)          host_makefile_frag=config/mh-dgux ;;
 101   m88k-harris-cxux*)      host_makefile_frag=config/mh-cxux ;;
 102   m88k-motorola-sysv*)    host_makefile_frag=config/mh-delta88;;
 103   mips*-dec-ultrix*)      host_makefile_frag=config/mh-decstation ;;
 104   mips*-sgi-irix[56]*)    host_makefile_frag=config/mh-irix5 ;;
 105   mips*-sgi-irix4*)       host_makefile_frag=config/mh-irix4 ;;
 106   mips*-sgi-irix3*)       host_makefile_frag=config/mh-sysv ;;
 107   mips*-*-sysv4*)         host_makefile_frag=config/mh-sysv4 ;;
 108   mips*-*-sysv*)          host_makefile_frag=config/mh-riscos ;;
 109   i[345]86-ncr-sysv4.3)   host_makefile_frag=config/mh-ncrsvr43 ;;
 110   i[345]86-ncr-sysv4*)    host_makefile_frag=config/mh-ncr3000 ;;
 111   i[345]86-*-sco*)        host_makefile_frag=config/mh-sco ;;
 112   i[345]86-*-isc*)        host_makefile_frag=config/mh-sysv ;;
 113   i[345]86-*-linux*)      host_makefile_frag=config/mh-linux ;;
 114   i[345]86-*-solaris2*)   host_makefile_frag=config/mh-sysv4 ;;
 115   i[345]86-*-aix*)        host_makefile_frag=config/mh-aix386 ;;
 116   i[345]86-*-go32*)       host_makefile_frag=config/mh-go32 ;;
 117   i[345]86-*-win32)       host_makefile_frag=config/mh-i386win32 ;;
 118   vax-*-ultrix2*)         host_makefile_frag=config/mh-vaxult2 ;;
 119   *-ibm-aix*)             host_makefile_frag=config/mh-aix ;;
 120   *-bull-bosx*)           host_makefile_frag=config/mh-aix ;;
 121   *-*-solaris2*)          host_makefile_frag=config/mh-solaris ;;
 122   m68k-sun-*)             host_makefile_frag=config/mh-sun3 ;;
 123   *-sun-*)                host_makefile_frag=config/mh-sun ;;
 124   *-hp-hpux[78]*)         host_makefile_frag=config/mh-hpux8 ;;
 125   *-hp-hpux*)             host_makefile_frag=config/mh-hpux ;;
 126   *-*-hiux*)              host_makefile_frag=config/mh-hpux ;;
 127   rs6000-*-lynxos*)       host_makefile_frag=config/mh-lynxrs6k ;;
 128   *-*-lynxos*)            host_makefile_frag=config/mh-lynxos ;;
 129   *-*-sysv4*)             host_makefile_frag=config/mh-sysv4 ;;
 130   *-*-sysv*)              host_makefile_frag=config/mh-sysv ;;
 131 esac
 132 fi
 133
 134 # See if we can extract a definition of CC from the fragment.
 135 if [ -z "${CC}" ]; then
 136   if [ -n "${host_makefile_frag}" -a -f "${srcdir}/${host_makefile_frag}" ]; then
 137     CC=`sed -n -e 's/CC[        ]*=[    ]*\(.*\)$/\1/p' < ${srcdir}/${host_makefile_frag}`
 138   fi
 139 fi
 140
 141 # The Solaris /usr/ucb/cc compiler does not appear to work.
 142 case "${host}" in
 143   sparc-sun-solaris2*)
 144       if [ "`/usr/bin/which ${CC-cc}`" = "/usr/ucb/cc" ] ; then
 145           could_use=
 146           [ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
 147           if [ -d /opt/cygnus/bin ] ; then
 148               if [ "$could_use" = "" ] ; then
 149                   could_use="/opt/cygnus/bin"
 150               else
 151                   could_use="$could_use or /opt/cygnus/bin"
 152               fi
 153           fi
 154         if [ "$could_use" = "" ] ; then
 155             echo "Warning: compilation may fail because you're using"
 156             echo "/usr/ucb/cc.  You should change your PATH or CC "
 157             echo "variable and rerun configure."
 158         else
 159             echo "Warning: compilation may fail because you're using"
 160             echo "/usr/ucb/cc, when you should use the C compiler from"
 161             echo "$could_use.  You should change your"
 162             echo "PATH or CC variable and rerun configure."
 163         fi
 164       fi
 165   ;;
 166 esac
 167
 168 # We default to --with-shared on platforms where -fpic is meaningless.
 169 # Well, we don't yet, but we will.
 170 if false && [ "${host}" = "${target}" ] && [ x${enable_shared} = x ]; then
 171   case "${target}" in
 172     alpha-dec-osf*)     enable_shared=yes ;;
 173     mips-sgi-irix5*)    enable_shared=yes ;;
 174     *)                  enable_shared=no ;;
 175   esac
 176 fi
 177
 178 if [ x${enable_shared} = xyes ]; then
 179   waugh=
 180   case "${host}" in
 181     hppa*)              waugh=config/mh-papic ;;
 182     i[345]86-*)         waugh=config/mh-x86pic ;;
 183     *)                  waugh=config/mh-${host_cpu}pic ;;
 184   esac
 185   if [ -f ${srcdir}/${waugh} ]; then
 186     if [ -n "${host_makefile_frag}" ] ; then
 187       cat ${srcdir}/${host_makefile_frag} > mh-frag
 188       cat ${srcdir}/${waugh} >> mh-frag
 189       host_makefile_frag=mh-frag
 190     else
 191       host_makefile_frag=${waugh}
 192     fi
 193   fi
 194 fi
 195
 196 # per-target:
 197
 198 case "${target}" in
 199   v810*)                target_makefile_frag=config/mt-v810 ;;
 200   i[345]86-*-netware*)  target_makefile_frag=config/mt-netware ;;
 201   powerpc-*-netware*)   target_makefile_frag=config/mt-netware ;;
 202 esac
 203
 204 skipdirs=
 205 gasdir=gas
 206 use_gnu_ld=
 207 use_gnu_as=
 208
 209 # some tools are so dependent upon X11 that if we're not building with X,
 210 # it's not even worth trying to configure, much less build, that tool.
 211
 212 case ${with_x} in
 213   yes | "")  # the default value for this tree is that X11 is available
 214         ;;
 215   no)
 216         skipdirs="${skipdirs} tk gash"
 217         ;;
 218   *)
 219         echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
 220         ;;
 221 esac
 222
 223 # Some tools are only suitable for building in a "native" situation.
 224 # Those are added when we have a host==target configuration.  For cross
 225 # toolchains, we add some directories that should only be useful in a
 226 # cross-compiler.
 227
 228 is_cross_compiler=
 229
 230 if [ x"${host}" = x"${target}" ] ; then
 231         # when doing a native toolchain, don't build the targets
 232         # that are in the 'cross only' list
 233         skipdirs="${skipdirs} ${cross_only}"
 234         is_cross_compiler=no
 235 else
 236         # similarly, don't build the targets in the 'native only'
 237         # list when building a cross compiler
 238         skipdirs="${skipdirs} ${native_only}"
 239         is_cross_compiler=yes
 240 fi
 241
 242 copy_dirs=
 243
 244 # Handle --with-headers=XXX.  The contents of the named directory are
 245 # copied to $(tooldir)/include.
 246 if [ x"${with_headers}" != x ]; then
 247   if [ x${is_cross_compiler} = xno ]; then
 248     echo 1>&2 '***' --with-headers is only supported when cross compiling
 249     exit 1
 250   fi
 251   case "${exec_prefixoption}" in
 252   "") x=${prefix} ;;
 253   *) x=${exec_prefix} ;;
 254   esac
 255   copy_dirs="${copy_dirs} ${with_headers} $x/${target_alias}/include"
 256 fi
 257
 258 # Handle --with-libs=XXX.  Multiple directories are permitted.  The
 259 # contents are copied to $(tooldir)/lib.
 260 if [ x"${with_libs}" != x ]; then
 261   if [ x${is_cross_compiler} = xno ]; then
 262     echo 1>&2 '***' --with-libs is only supported when cross compiling
 263     exit 1
 264   fi
 265   # Copy the libraries in reverse order, so that files in the first named
 266   # library override files in subsequent libraries.
 267   case "${exec_prefixoption}" in
 268   "") x=${prefix} ;;
 269   *) x=${exec_prefix} ;;
 270   esac
 271   for l in ${with_libs}; do
 272     copy_dirs="$l $x/${target_alias}/lib ${copy_dirs}"
 273   done
 274 fi
 275
 276 # If both --with-headers and --with-libs are specified, default to
 277 # --without-newlib.
 278 if [ x"${with_headers}" != x ] && [ x"${with_libs}" != x ]; then
 279   if [ x"${with_newlib}" = x ]; then
 280     with_newlib=no
 281   fi
 282 fi
 283
 284 # Recognize --with-newlib/--without-newlib.
 285 if [ x${with_newlib} = xno ]; then
 286   skipdirs="${skipdirs} newlib"
 287 elif [ x${with_newlib} = xyes ]; then
 288   skipdirs=`echo " ${skipdirs} " | sed -e 's/ newlib / /'`
 289 fi
 290
 291 # Handle ${copy_dirs}
 292 set fnord ${copy_dirs}
 293 shift
 294 while [ $# != 0 ]; do
 295   if [ -f $2/COPIED ] && [ x"`cat $2/COPIED`" = x"$1" ]; then
 296     :
 297   else
 298     echo Copying $1 to $2
 299
 300     # Use the install script to create the directory and all required
 301     # parent directories.
 302     if [ -d $2 ]; then
 303       :
 304     else
 305       echo >config.temp
 306       ${srcdir}/install.sh -c -m 644 config.temp $2/COPIED
 307     fi
 308
 309     # Copy the directory, assuming we have tar.
 310     # FIXME: Should we use B in the second tar?  Not all systems support it.
 311     (cd $1; tar -cf - .) | (cd $2; tar -xpf -)
 312
 313     # It is the responsibility of the user to correctly adjust all
 314     # symlinks.  If somebody can figure out how to handle them correctly
 315     # here, feel free to add the code.
 316
 317     echo $1 > $2/COPIED
 318   fi
 319   shift; shift
 320 done
 321
 322 # Configure extra directories which are host specific
 323
 324 case "${host}" in
 325   i[345]86-*-go32*|i[345]86-*-win32*)
 326           configdirs="$configdirs dosrel" ;;
 327 esac
 328
 329 # Remove more programs from consideration, based on the host or
 330 # target this usually means that a port of the program doesn't
 331 # exist yet.
 332
 333 noconfigdirs=""
 334
 335 case "${host}" in
 336   i[345]86-*-vsta)
 337     noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
 338     ;;
 339   i[345]86-*-go32)
 340     noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
 341         ;;
 342   i[345]86-*-win32)
 343      noconfigdirs="tk tcl expect diff make texinfo bison flex send-pr gprof gdb readline"
 344     ;;
 345 esac
 346
 347
 348 case "${target}" in
 349   *-*-netware)
 350     noconfigdirs="$noconfigdirs libg++ libstdc++ librx newlib xiberty"
 351     ;;
 352   *-*-vxworks5.1)
 353     noconfigdirs="$noconfigdirs newlib"
 354     ;;
 355   alpha-dec-osf*)
 356     # ld works, but does not support shared libraries.  emacs doesn't
 357     # work.  newlib is not 64 bit ready.  I'm not sure about emacs19,
 358     # fileutils or grep.
 359     noconfigdirs="$noconfigdirs ld emacs emacs19 fileutils grep newlib"
 360     ;;
 361   alpha*-*-*)
 362     # newlib is not 64 bit ready
 363     noconfigdirs="$noconfigdirs newlib"
 364     ;;
 365 # start-sanitize-arc
 366   arc-*-*)
 367     ;;
 368 # end-sanitize-arc
 369 # start-sanitize-psion
 370   arm-*-pe*)
 371     ;;
 372 # end-sanitize-psion
 373   arm-*-riscix*)
 374     noconfigdirs="$noconfigdirs ld"
 375     ;;
 376   h8300*-*-* | \
 377   h8500-*-*)
 378     noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
 379     ;;
 380   hppa*-*-*elf* | \
 381   hppa*-*-lites*)
 382     # Do configure ld/binutils/gas for this case.
 383     ;;
 384   hppa*-*-*)
 385     # HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach
 386     # cc is gcc, and on any system a user should be able to link cc to
 387     # whatever they want.  FIXME, emacs emacs19).
 388     case "${CC}" in
 389         "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
 390         *) ;;
 391     esac
 392     noconfigdirs="$noconfigdirs ld shellutils"
 393     ;;
 394   i[345]86-*-go32)
 395     # but don't build gdb
 396     noconfigdirs="$noconfigdirs gdb libg++ libstdc++ libio librx"
 397     ;;
 398
 399   i[345]86-*-win32)
 400     # Can't build gdb for win32 target
 401     noconfigdirs="$noconfigdirs gdb tk"
 402     # but put newlib back
 403     skipdirs=`echo " ${skipdirs} " | sed -e 's/ newlib / /'`
 404     ;;
 405   i[345]86-*-pe)
 406     noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
 407     ;;
 408   i[345]86-*-sco*)
 409     noconfigdirs="$noconfigdirs gprof"
 410     ;;
 411   i[345]86-*-solaris2*)
 412     # The linker does static linking correctly, but the Solaris C library
 413     # has bugs such that some important functions won't work when statically
 414     # linked.  (See man pages for getpwuid, for example.)
 415     noconfigdirs="$noconfigdirs ld"
 416     ;;
 417   i[345]86-*-sysv4*)
 418     # The SYSV4 C compiler doesn't handle Emacs correctly
 419     case "${CC}" in
 420         "" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
 421         *) ;;
 422     esac
 423     # but that's okay since emacs doesn't work anyway
 424     noconfigdirs="$noconfigdirs emacs emacs19"
 425     ;;
 426   powerpc-*-aix*)
 427     # copied from rs6000-*-* entry
 428     noconfigdirs="$noconfigdirs gas ld binutils gprof textutils cvs"
 429     ;;
 430   powerpc*-*-winnt* | powerpc*-*-pe*)
 431     noconfigdirs="$noconfigdirs ld gdb"
 432     ;;
 433   rs6000-*-lynxos*)
 434     # a gcc built textutils will cause the linker to hang on 'join'
 435     # The CVS server code doesn't work on the RS/6000
 436     # Newlib makes problems for libg++ in crosses.
 437     noconfigdirs="$noconfigdirs gas ld newlib gprof textutils cvs"
 438     use_gnu_ld=no
 439     use_gnu_as=no
 440     ;;
 441   rs6000-*-*)
 442     # a gcc built textutils will cause the linker to hang on 'join'
 443     noconfigdirs="$noconfigdirs gas ld binutils gprof textutils"
 444     ;;
 445   m68k-*-netbsd*)
 446     noconfigdirs="$noconfigdirs gdb"
 447     ;;
 448   m68k-apollo-*)
 449     noconfigdirs="$noconfigdirs ld binutils gprof"
 450     ;;
 451   mips*-*-irix5*)
 452     # The GNU linker does not support shared libraries.
 453     # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
 454     noconfigdirs="$noconfigdirs ld gprof emacs"
 455     ;;
 456   mips*-dec-bsd*)
 457     noconfigdirs="$noconfigdirs gprof"
 458     ;;
 459   mips*-*-bsd*)
 460     noconfigdirs="$noconfigdirs gprof"
 461     ;;
 462   mips*-*-*)
 463     noconfigdirs="$noconfigdirs gprof"
 464     ;;
 465   romp-*-*)
 466     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes"
 467     ;;
 468   sh-*-*)
 469     case "${host}" in
 470       i[345]86-*-vsta) ;; # don't add gprof back in
 471       i[345]86-*-go32) ;; # don't add gprof back in
 472       *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
 473     esac
 474     ;;
 475   sparc-*-sunos4*)
 476     if [ x${is_cross_compiler} != xno ] ; then
 477            noconfigdirs="$noconfigdirs gdb gdbtest newlib"
 478     else
 479            use_gnu_ld=no
 480     fi
 481     ;;
 482   v810-*-*)
 483     noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld libg++ libstdc++ opcodes"
 484     ;;
 485   vax-*-vms)
 486     noconfigdirs="$noconfigdirs bfd binutils gdb ld newlib opcodes"
 487     ;;
 488   vax-*-*)
 489     noconfigdirs="$noconfigdirs newlib"
 490     ;;
 491   *-*-lynxos*)
 492      # Newlib makes problems for libg++ in crosses.
 493      noconfigdirs="$noconfigdirs newlib"
 494      ;;
 495 esac
 496
 497 # Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
 498 # $target_configdirs.
 499 # If we have the source for $noconfigdirs entries, add them to $notsupp.
 500 notsupp=""
 501 for dir in . $skipdirs $noconfigdirs ; do
 502   if [ $dir != . ]  && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
 503     configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
 504     if [ -r $srcdir/$dir/configure ] || [ -r $srcdir/$dir/configure.in ]; then
 505       if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
 506         true
 507       else
 508         notsupp="$notsupp $dir"
 509       fi
 510     fi
 511   fi
 512   if [ $dir != . ]  && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
 513     target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
 514     if [ -r $srcdir/$dir/configure ] || [ -r $srcdir/$dir/configure.in ]; then
 515       if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
 516         true
 517       else
 518         notsupp="$notsupp $dir"
 519       fi
 520     fi
 521   fi
 522 done
 523
 524 # Deconfigure all subdirectories, in case we are changing the
 525 # configuration from one where a subdirectory is supported to one where it
 526 # is not.
 527 if [ -z "${norecursion}" ]; then
 528   for i in ${configdirs} ${target_configdirs}; do
 529     rm -f $i/Makefile
 530   done
 531 fi
 532
 533 # Produce a warning message for the subdirs we can't configure.
 534 # This isn't especially interesting in the Cygnus tree, but in the individual
 535 # FSF releases, it's important to let people know when their machine isn't
 536 # supported by the one or two programs in a package.
 537
 538 if [ -n "${notsupp}" ] && [ -z "${norecursion}" ]; then
 539   # If $appdirs is non-empty, at least one of those directories must still
 540   # be configured, or we error out.  (E.g., if the gas release supports a
 541   # specified target in some subdirs but not the gas subdir, we shouldn't
 542   # pretend that all is well.)
 543   if [ -n "$appdirs" ]; then
 544     for dir in $appdirs ; do
 545       if [ -r $dir/Makefile.in ]; then
 546         if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
 547           appdirs=""
 548           break
 549         fi
 550         if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
 551           appdirs=""
 552           break
 553         fi
 554       fi
 555     done
 556     if [ -n "$appdirs" ]; then
 557       echo "*** This configuration is not supported by this package." 1>&2
 558       exit 1
 559     fi
 560   fi
 561   # Okay, some application will build, or we don't care to check.  Still
 562   # notify of subdirs not getting built.
 563   echo "*** This configuration is not supported in the following subdirectories:" 1>&2
 564   echo "    ${notsupp}" 1>&2
 565   echo "    (Any other directories should still work fine.)" 1>&2
 566 fi
 567
 568 # Set with_gnu_as and with_gnu_ld as appropriate.
 569 #
 570 # This is done by determining whether or not the appropriate directory
 571 # is available, and by checking whether or not specific configurations
 572 # have requested that this magic not happen.
 573 #
 574 # The command line options always override the explicit settings in
 575 # configure.in, and the settings in configure.in override this magic.
 576 #
 577 # If the default for a toolchain is to use GNU as and ld, and you don't
 578 # want to do that, then you should use the --without-gnu-as and
 579 # --without-gnu-ld options for the configure script.
 580
 581 if [ x${use_gnu_as} = x ] ; then
 582   if [ x${with_gnu_as} != xno ] && echo " ${configdirs} " | grep " ${gasdir} " > /dev/null 2>&1 && [ -d ${srcdir}/${gasdir} ] ; then
 583     with_gnu_as=yes
 584     withoptions="$withoptions --with-gnu-as"
 585   fi
 586 fi
 587
 588 if [ x${use_gnu_ld} = x ] ; then
 589   if [ x${with_gnu_ld} != xno ] && echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 && [ -d ${srcdir}/ld ] ; then
 590     with_gnu_ld=yes
 591     withoptions="$withoptions --with-gnu-ld"
 592   fi
 593 fi
 594
 595 if [ x${enable_shared} = xyes ]; then
 596   case "${target}" in
 597     hppa*)              target_makefile_frag=config/mt-papic ;;
 598     i[345]86-*)         target_makefile_frag=config/mt-x86pic ;;
 599     *)                  target_makefile_frag=config/mt-${target_cpu}pic ;;
 600   esac
 601 fi
 602
 603 # post-target:
 604
 605 # Record target_configdirs and the configure arguments in Makefile.
 606 targargs=`echo "${arguments}" | \
 607         sed -e 's/--*norecursion//' \
 608             -e 's/--*cache[a-z-]*=[^    ]*//' \
 609             -e 's/--*cache[a-z-]*[      ][      ]*[^    ]*//'`
 610 sed -e "s:^TARGET_CONFIGDIRS[   ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
 611     -e "s%^CONFIG_ARGUMENTS[    ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
 612        Makefile > Makefile.tem
 613 rm -f Makefile
 614 mv -f Makefile.tem Makefile
 615
 616 #
 617 # Local Variables:
 618 # fill-column: 131
 619 # End:
 620 #