configure.in

   1 ##############################################################################
   2
   3 ## This file is a shell script fragment that supplies the information
   4 ## necessary to tailor a template configure script into the configure
   5 ## script appropriate for this directory.  For more information, check
   6 ## any existing configure script.
   7
   8 ## Be warned, there are two types of configure.in files.  There are those
   9 ## used by Autoconf, which are macros which are expanded into a configure
  10 ## script by autoconf.  The other sort, of which this is one, is executed
  11 ## by Cygnus configure.
  12
  13 ## For more information on these two systems, check out the documentation
  14 ## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
  15
  16 ##############################################################################
  17
  18 ### To add a new directory to the tree, first choose whether it is a target
  19 ### or a host dependent tool.  Then put it into the appropriate list
  20 ### (library or tools, host or target), doing a dependency sort.  For
  21 ### example, gdb requires that byacc (or bison) be built first, so it is in
  22 ### the ${host_tools} list after byacc and bison.
  23
  24
  25 # these libraries are used by various programs built for the host environment
  26 #
  27 host_libs="mmalloc libiberty opcodes bfd readline glob gash tcl tk tclX"
  28
  29 # these tools are built for the host environment
  30 #
  31 host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
  32             prms send-pr gprof gdbtest tgas etc expect dejagnu sim
  33             m4 autoconf ispell grep diff rcs cvs fileutils shellutils
  34             textutils wdiff find emacs uudecode hello tar gzip indent
  35             recode release sed utils"
  36
  37
  38 # these libraries are built for the target environment, and are built after
  39 # the host libraries and the host tools (which may be a cross compiler)
  40 #
  41 target_libs="libm xiberty newlib libio libg++"
  42
  43 ## start-sanitize-chill
  44 target_libs="${target_libs} chill chillrt"
  45 ## end-sanitize-chill
  46
  47 # these tools are built using the target libs, and are intended to run only
  48 # in the target environment.  we currently have none.
  49 #
  50 # note: any program that *uses* libraries that are in the "target_libs"
  51 # list belongs in this list.  those programs are also very likely
  52 # candidates for the "native_only" list which follows
  53 #
  54 target_tools="groff"
  55
  56 ################################################################################
  57
  58 ## These two lists are of directories that are to be removed from the
  59 ## ${configdirs} list for either cross-compilations or for native-
  60 ## compilations.  For example, it doesn't make that much sense to
  61 ## cross-compile Emacs, nor is it terribly useful to compile xiberty in
  62 ## a native environment.
  63
  64 # directories to be built in the native environment only
  65 #
  66 native_only="autoconf cvs emacs fileutils find grep groff gzip hello indent
  67              ispell m4 rcs recode sed shellutils tar textutils gash tk uudecode wdiff
  68              gprof"
  69
  70 # directories to be built in a cross environment only
  71 #
  72 cross_only="xiberty newlib"
  73
  74 ## All tools belong in one of the four categories, and are assigned above
  75 #
  76 configdirs="${host_libs} ${host_tools} ${target_libs} ${target_tools}"
  77
  78 ################################################################################
  79
  80 srctrigger=move-if-change
  81 srcname="gnu development package"
  82
  83 # per-host:
  84
  85 case "${host}" in
  86   m68k-hp-hpux*)          host_makefile_frag=config/mh-hp300 ;;
  87   m68k-apollo-sysv*)      host_makefile_frag=config/mh-apollo68 ;;
  88   m68k-apollo-bsd*)       host_makefile_frag=config/mh-a68bsd ;;
  89   m88k-motorola-sysv*)    host_makefile_frag=config/mh-delta88;;
  90   m88k-dg-dgux*)          host_makefile_frag=config/mh-dgux ;;
  91   mips*-dec-ultrix*)      host_makefile_frag=config/mh-decstation ;;
  92   mips*-sgi-irix5*)       host_makefile_frag=config/mh-irix5 ;;
  93   mips*-sgi-irix4*)       host_makefile_frag=config/mh-irix4 ;;
  94   mips*-sgi-irix3*)       host_makefile_frag=config/mh-sysv ;;
  95   mips*-*-sysv*)          host_makefile_frag=config/mh-riscos ;;
  96   i[34]86-ncr-sysv4*)     host_makefile_frag=config/mh-ncr3000 ;;
  97   i[34]86-*-sco*)         host_makefile_frag=config/mh-sco ;;
  98   i[34]86-*-isc*)         host_makefile_frag=config/mh-sysv ;;
  99   i[34]86-*-linux*)       host_makefile_frag=config/mh-linux ;;
 100   i[34]86-*-solaris2*)    host_makefile_frag=config/mh-sysv4 ;;
 101   i[34]86-*-aix*)         host_makefile_frag=config/mh-aix386 ;;
 102   vax-*-ultrix2*)         host_makefile_frag=config/mh-vaxult2 ;;
 103   *-ibm-aix*)             host_makefile_frag=config/mh-aix ;;
 104   *-bull-bosx*)           host_makefile_frag=config/mh-aix ;;
 105   *-*-solaris2*)          host_makefile_frag=config/mh-solaris ;;
 106   m68k-sun-*)             host_makefile_frag=config/mh-sun3 ;;
 107   *-sun-*)                host_makefile_frag=config/mh-sun ;;
 108   *-hp-hpux*)             host_makefile_frag=config/mh-hpux ;;
 109   *-*-hiux*)              host_makefile_frag=config/mh-hpux ;;
 110   *-*-lynxos*)            host_makefile_frag=config/mh-lynxos
 111                                 cross_only="xiberty" ;;
 112   *-*-sysv4*)             host_makefile_frag=config/mh-sysv4 ;;
 113   *-*-sysv*)              host_makefile_frag=config/mh-sysv ;;
 114 esac
 115
 116 # per-target:
 117
 118 gasdir=gas
 119 use_gnu_ld=
 120 use_gnu_as=
 121
 122 case "${target}" in
 123   hppa*-hp-hpux*)         target_makefile_frag=config/mt-hppa ;;
 124 esac
 125
 126 # some tools are so dependent upon X11 that if we're not building with X,
 127 # it's not even worth trying to configure, much less build, that tool.
 128
 129 case ${with_x} in
 130   yes | "")  # the default value for this tree is that X11 is available
 131         ;;
 132   no)
 133         configdirs=`echo ${configdirs} | sed -e 's/tk//;/gash//'`
 134         ;;
 135   *)
 136         echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
 137         ;;
 138 esac
 139
 140
 141
 142 # Some tools are only suitable for building in a "native" situation.
 143 # Those are added when we have a host==target configuration.  For cross
 144 # toolchains, we add some directories that should only be useful in a
 145 # cross-compiler.
 146
 147 if [ x"${host}" = x"${target}" ] ; then
 148         # when doing a native toolchain, don't build the targets
 149         # that are in the 'cross only' list
 150         for i in ${cross_only} ; do
 151           configdirs=`echo ${configdirs} | sed -e "s/$i//"`
 152         done
 153 else
 154         # similarly, don't build the targets in the 'native only'
 155         # list when building a cross compiler
 156         for i in ${native_only} ; do
 157           configdirs=`echo ${configdirs} | sed -e "s/$i//"`
 158         done
 159 fi
 160
 161 # Remove more programs from consideration, based on the host or
 162 # target this usually means that a port of the program doesn't
 163 # exist yet.
 164
 165 noconfigdirs=""
 166
 167 case "${host}" in
 168   i[34]86-*-netbsd*)
 169     noconfigdirs="tk fileutils"
 170     ;;
 171   i[34]86-*-go32)
 172     noconfigdirs="tcl expect deja-gnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
 173     ;;
 174 esac
 175
 176 case "${target}" in
 177   alpha-dec-osf1*)
 178     noconfigdirs="$noconfigdirs gas emacs fileutils grep libg++ libio"
 179     ;;
 180   h8300*-*-* | \
 181   h8500-*-*)
 182     noconfigdirs="$noconfigdirs libg++ libio"
 183 ## start-sanitize-chill
 184     noconfigdirs="$noconfigdirs chillrt"
 185 ## end-sanitize-chill
 186     ;;
 187   hppa*-*-osf)
 188     # Do configure ld/binutils/gas for this case.
 189     ;;
 190   hppa*-*-*)
 191     # HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach
 192     # cc is gcc, and on any system a user should be able to link cc to
 193     # whatever they want.  FIXME, emacs).
 194     case "${CC}" in
 195         "" | cc*) noconfigdirs="$noconfigdirs emacs" ;;
 196         *) ;;
 197     esac
 198     noconfigdirs="$noconfigdirs ld binutils shellutils"
 199     if [ -f ${srcdir}/pagas/configure.in ]; then
 200       configdirs=`echo ${configdirs} | sed -e 's/gas /pagas /'`
 201     else
 202       # It'll still DTRT if "gas" directory isn't here either.
 203       noconfigdirs="$noconfigdirs gas"
 204     fi
 205     gasdir=pagas
 206     ;;
 207   i[34]86-*-go32)
 208     # add the go32 support tools to the list
 209     configdirs=`echo go32 ${configdirs}`
 210     ;;
 211   i[34]86-*-solaris2*)
 212     # The linker does static linking correctly, but the Solaris C library
 213     # has bugs such that some important functions won't work when statically
 214     # linked.  (See man pages for getpwuid, for example.)
 215     noconfigdirs="$noconfigdirs ld"
 216     ;;
 217   i[34]86-*-sysv4*)
 218     # The SYSV4 C compiler doesn't handle Emacs correctly
 219     case "${CC}" in
 220         "" | cc*) noconfigdirs="$noconfigdirs emacs" ;;
 221         *) ;;
 222     esac
 223     # but that's okay since emacs doesn't work anyway
 224     noconfigdirs="$noconfigdirs emacs"
 225
 226     # static versions of several key libraries are not available,
 227     # so building our entire toolchain is impossible until
 228     # the GNU linker supports shared libraries
 229     noconfigdirs="$noconfigdirs ld"
 230     ;;
 231   rs6000-*-*)
 232     # a gcc built textutils will cause the linker to hang on 'join'
 233     noconfigdirs="$noconfigdirs ld binutils gas gprof textutils"
 234     ;;
 235   m68k-apollo-*)
 236     noconfigdirs="$noconfigdirs ld binutils gprof"
 237     ;;
 238   mips-*-*)
 239     noconfigdirs="$noconfigdirs gprof"
 240     ;;
 241   sh-*-*)
 242     case "${host}" in
 243       i[34]86-*-go32) ;; # don't add gprof back in
 244       *) configdirs=`echo gprof ${configdirs}` ;;
 245     esac
 246     ;;
 247   sparc-*-sunos4*)
 248     use_gnu_ld=no
 249     ;;
 250   sparc-*-solaris2*)
 251     # See i386-*-solaris2* above.
 252     noconfigdirs="$noconfigdirs ld"
 253     ;;
 254   i[34]86-*-sco*)
 255     noconfigdirs="$noconfigdirs gprof"
 256     ;;
 257   *-*-sysv4)
 258     use_gnu_ld=no
 259     ;;
 260   *-*-vms)
 261     noconfigdirs="$noconfigdirs bfd ld binutils gdb"
 262     ;;
 263 esac
 264
 265 notsupp=""
 266 for dir in . $noconfigdirs ; do
 267   if [ $dir != . ] && echo "# ${configdirs} #" | grep "${dir} " >/dev/null 2>&1 ; then
 268     configdirs=`echo $configdirs | sed -e "s/${dir} / /"`
 269     if [ -r $srcdir/$dir/configure ] || [ -r $srcdir/$dir/configure.in ]; then
 270       notsupp="$notsupp $dir"
 271     fi
 272   fi
 273 done
 274
 275 # Produce a warning message for the subdirs we can't configure.
 276 # This isn't especially interesting in the Cygnus tree, but in the individual
 277 # FSF releases, it's important to let people know when their machine isn't
 278 # supported by the one or two programs in a package.
 279
 280 if [ x"${notsupp}" != x ]; then
 281   echo "*** This configuration is not supported in the following subdirectories:" 1>&2
 282   echo "    ${notsupp}" 1>&2
 283   echo "    (Any other directories should still work fine.)" 1>&2
 284 fi
 285
 286 # Set with_gnu_as and with_gnu_ld as appropriate.
 287 #
 288 # This is done by determining whether or not the appropriate directory
 289 # is available, and by checking whether or not specific configurations
 290 # have requested that this magic not happen.
 291 #
 292 # The command line options always override the explicit settings in
 293 # configure.in, and the settings in configure.in override this magic.
 294 #
 295 # If the default for a toolchain is to use GNU as and ld, and you don't
 296 # want to do that, then you should use the --without-gnu-as and
 297 # --without-gnu-ld options for the configure script.
 298
 299 if [ x${use_gnu_as} = x ] ; then
 300   if [ x${with_gnu_as} != xno ] && echo ${configdirs} | grep "${gasdir} " > /dev/null 2>&1 && [ -d ${srcdir}/${gasdir} ] ; then
 301     with_gnu_as=yes
 302     withoptions="$withoptions --with-gnu-as"
 303   fi
 304 fi
 305
 306 if [ x${use_gnu_ld} = x ] ; then
 307   if [ x${with_gnu_ld} != xno ] && echo ${configdirs} | grep ld > /dev/null 2>&1 && [ -d ${srcdir}/ld ] ; then
 308     with_gnu_ld=yes
 309     withoptions="$withoptions --with-gnu-ld"
 310   fi
 311 fi
 312
 313 #
 314 # Local Variables:
 315 # fill-column: 131
 316 # End:
 317 #