ARM: mvebu: Update the SDHCI node on Armada 38x
[deliverable/linux.git] / crypto / Kconfig
1 #
2 # Generic algorithms support
3 #
4 config XOR_BLOCKS
5 tristate
6
7 #
8 # async_tx api: hardware offloaded memory transfer/transform support
9 #
10 source "crypto/async_tx/Kconfig"
11
12 #
13 # Cryptographic API Configuration
14 #
15 menuconfig CRYPTO
16 tristate "Cryptographic API"
17 help
18 This option provides the core Cryptographic API.
19
20 if CRYPTO
21
22 comment "Crypto core or helper"
23
24 config CRYPTO_FIPS
25 bool "FIPS 200 compliance"
26 depends on (CRYPTO_ANSI_CPRNG || CRYPTO_DRBG) && !CRYPTO_MANAGER_DISABLE_TESTS
27 depends on MODULE_SIG
28 help
29 This options enables the fips boot option which is
30 required if you want to system to operate in a FIPS 200
31 certification. You should say no unless you know what
32 this is.
33
34 config CRYPTO_ALGAPI
35 tristate
36 select CRYPTO_ALGAPI2
37 help
38 This option provides the API for cryptographic algorithms.
39
40 config CRYPTO_ALGAPI2
41 tristate
42
43 config CRYPTO_AEAD
44 tristate
45 select CRYPTO_AEAD2
46 select CRYPTO_ALGAPI
47
48 config CRYPTO_AEAD2
49 tristate
50 select CRYPTO_ALGAPI2
51
52 config CRYPTO_BLKCIPHER
53 tristate
54 select CRYPTO_BLKCIPHER2
55 select CRYPTO_ALGAPI
56
57 config CRYPTO_BLKCIPHER2
58 tristate
59 select CRYPTO_ALGAPI2
60 select CRYPTO_RNG2
61 select CRYPTO_WORKQUEUE
62
63 config CRYPTO_HASH
64 tristate
65 select CRYPTO_HASH2
66 select CRYPTO_ALGAPI
67
68 config CRYPTO_HASH2
69 tristate
70 select CRYPTO_ALGAPI2
71
72 config CRYPTO_RNG
73 tristate
74 select CRYPTO_RNG2
75 select CRYPTO_ALGAPI
76
77 config CRYPTO_RNG2
78 tristate
79 select CRYPTO_ALGAPI2
80
81 config CRYPTO_PCOMP
82 tristate
83 select CRYPTO_PCOMP2
84 select CRYPTO_ALGAPI
85
86 config CRYPTO_PCOMP2
87 tristate
88 select CRYPTO_ALGAPI2
89
90 config CRYPTO_MANAGER
91 tristate "Cryptographic algorithm manager"
92 select CRYPTO_MANAGER2
93 help
94 Create default cryptographic template instantiations such as
95 cbc(aes).
96
97 config CRYPTO_MANAGER2
98 def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
99 select CRYPTO_AEAD2
100 select CRYPTO_HASH2
101 select CRYPTO_BLKCIPHER2
102 select CRYPTO_PCOMP2
103
104 config CRYPTO_USER
105 tristate "Userspace cryptographic algorithm configuration"
106 depends on NET
107 select CRYPTO_MANAGER
108 help
109 Userspace configuration for cryptographic instantiations such as
110 cbc(aes).
111
112 config CRYPTO_MANAGER_DISABLE_TESTS
113 bool "Disable run-time self tests"
114 default y
115 depends on CRYPTO_MANAGER2
116 help
117 Disable run-time self tests that normally take place at
118 algorithm registration.
119
120 config CRYPTO_GF128MUL
121 tristate "GF(2^128) multiplication functions"
122 help
123 Efficient table driven implementation of multiplications in the
124 field GF(2^128). This is needed by some cypher modes. This
125 option will be selected automatically if you select such a
126 cipher mode. Only select this option by hand if you expect to load
127 an external module that requires these functions.
128
129 config CRYPTO_NULL
130 tristate "Null algorithms"
131 select CRYPTO_ALGAPI
132 select CRYPTO_BLKCIPHER
133 select CRYPTO_HASH
134 help
135 These are 'Null' algorithms, used by IPsec, which do nothing.
136
137 config CRYPTO_PCRYPT
138 tristate "Parallel crypto engine"
139 depends on SMP
140 select PADATA
141 select CRYPTO_MANAGER
142 select CRYPTO_AEAD
143 help
144 This converts an arbitrary crypto algorithm into a parallel
145 algorithm that executes in kernel threads.
146
147 config CRYPTO_WORKQUEUE
148 tristate
149
150 config CRYPTO_CRYPTD
151 tristate "Software async crypto daemon"
152 select CRYPTO_BLKCIPHER
153 select CRYPTO_HASH
154 select CRYPTO_MANAGER
155 select CRYPTO_WORKQUEUE
156 help
157 This is a generic software asynchronous crypto daemon that
158 converts an arbitrary synchronous software crypto algorithm
159 into an asynchronous algorithm that executes in a kernel thread.
160
161 config CRYPTO_MCRYPTD
162 tristate "Software async multi-buffer crypto daemon"
163 select CRYPTO_BLKCIPHER
164 select CRYPTO_HASH
165 select CRYPTO_MANAGER
166 select CRYPTO_WORKQUEUE
167 help
168 This is a generic software asynchronous crypto daemon that
169 provides the kernel thread to assist multi-buffer crypto
170 algorithms for submitting jobs and flushing jobs in multi-buffer
171 crypto algorithms. Multi-buffer crypto algorithms are executed
172 in the context of this kernel thread and drivers can post
173 their crypto request asynchronously to be processed by this daemon.
174
175 config CRYPTO_AUTHENC
176 tristate "Authenc support"
177 select CRYPTO_AEAD
178 select CRYPTO_BLKCIPHER
179 select CRYPTO_MANAGER
180 select CRYPTO_HASH
181 help
182 Authenc: Combined mode wrapper for IPsec.
183 This is required for IPSec.
184
185 config CRYPTO_TEST
186 tristate "Testing module"
187 depends on m
188 select CRYPTO_MANAGER
189 help
190 Quick & dirty crypto test module.
191
192 config CRYPTO_ABLK_HELPER
193 tristate
194 select CRYPTO_CRYPTD
195
196 config CRYPTO_GLUE_HELPER_X86
197 tristate
198 depends on X86
199 select CRYPTO_ALGAPI
200
201 comment "Authenticated Encryption with Associated Data"
202
203 config CRYPTO_CCM
204 tristate "CCM support"
205 select CRYPTO_CTR
206 select CRYPTO_AEAD
207 help
208 Support for Counter with CBC MAC. Required for IPsec.
209
210 config CRYPTO_GCM
211 tristate "GCM/GMAC support"
212 select CRYPTO_CTR
213 select CRYPTO_AEAD
214 select CRYPTO_GHASH
215 select CRYPTO_NULL
216 help
217 Support for Galois/Counter Mode (GCM) and Galois Message
218 Authentication Code (GMAC). Required for IPSec.
219
220 config CRYPTO_SEQIV
221 tristate "Sequence Number IV Generator"
222 select CRYPTO_AEAD
223 select CRYPTO_BLKCIPHER
224 select CRYPTO_RNG
225 help
226 This IV generator generates an IV based on a sequence number by
227 xoring it with a salt. This algorithm is mainly useful for CTR
228
229 comment "Block modes"
230
231 config CRYPTO_CBC
232 tristate "CBC support"
233 select CRYPTO_BLKCIPHER
234 select CRYPTO_MANAGER
235 help
236 CBC: Cipher Block Chaining mode
237 This block cipher algorithm is required for IPSec.
238
239 config CRYPTO_CTR
240 tristate "CTR support"
241 select CRYPTO_BLKCIPHER
242 select CRYPTO_SEQIV
243 select CRYPTO_MANAGER
244 help
245 CTR: Counter mode
246 This block cipher algorithm is required for IPSec.
247
248 config CRYPTO_CTS
249 tristate "CTS support"
250 select CRYPTO_BLKCIPHER
251 help
252 CTS: Cipher Text Stealing
253 This is the Cipher Text Stealing mode as described by
254 Section 8 of rfc2040 and referenced by rfc3962.
255 (rfc3962 includes errata information in its Appendix A)
256 This mode is required for Kerberos gss mechanism support
257 for AES encryption.
258
259 config CRYPTO_ECB
260 tristate "ECB support"
261 select CRYPTO_BLKCIPHER
262 select CRYPTO_MANAGER
263 help
264 ECB: Electronic CodeBook mode
265 This is the simplest block cipher algorithm. It simply encrypts
266 the input block by block.
267
268 config CRYPTO_LRW
269 tristate "LRW support"
270 select CRYPTO_BLKCIPHER
271 select CRYPTO_MANAGER
272 select CRYPTO_GF128MUL
273 help
274 LRW: Liskov Rivest Wagner, a tweakable, non malleable, non movable
275 narrow block cipher mode for dm-crypt. Use it with cipher
276 specification string aes-lrw-benbi, the key must be 256, 320 or 384.
277 The first 128, 192 or 256 bits in the key are used for AES and the
278 rest is used to tie each cipher block to its logical position.
279
280 config CRYPTO_PCBC
281 tristate "PCBC support"
282 select CRYPTO_BLKCIPHER
283 select CRYPTO_MANAGER
284 help
285 PCBC: Propagating Cipher Block Chaining mode
286 This block cipher algorithm is required for RxRPC.
287
288 config CRYPTO_XTS
289 tristate "XTS support"
290 select CRYPTO_BLKCIPHER
291 select CRYPTO_MANAGER
292 select CRYPTO_GF128MUL
293 help
294 XTS: IEEE1619/D16 narrow block cipher use with aes-xts-plain,
295 key size 256, 384 or 512 bits. This implementation currently
296 can't handle a sectorsize which is not a multiple of 16 bytes.
297
298 comment "Hash modes"
299
300 config CRYPTO_CMAC
301 tristate "CMAC support"
302 select CRYPTO_HASH
303 select CRYPTO_MANAGER
304 help
305 Cipher-based Message Authentication Code (CMAC) specified by
306 The National Institute of Standards and Technology (NIST).
307
308 https://tools.ietf.org/html/rfc4493
309 http://csrc.nist.gov/publications/nistpubs/800-38B/SP_800-38B.pdf
310
311 config CRYPTO_HMAC
312 tristate "HMAC support"
313 select CRYPTO_HASH
314 select CRYPTO_MANAGER
315 help
316 HMAC: Keyed-Hashing for Message Authentication (RFC2104).
317 This is required for IPSec.
318
319 config CRYPTO_XCBC
320 tristate "XCBC support"
321 select CRYPTO_HASH
322 select CRYPTO_MANAGER
323 help
324 XCBC: Keyed-Hashing with encryption algorithm
325 http://www.ietf.org/rfc/rfc3566.txt
326 http://csrc.nist.gov/encryption/modes/proposedmodes/
327 xcbc-mac/xcbc-mac-spec.pdf
328
329 config CRYPTO_VMAC
330 tristate "VMAC support"
331 select CRYPTO_HASH
332 select CRYPTO_MANAGER
333 help
334 VMAC is a message authentication algorithm designed for
335 very high speed on 64-bit architectures.
336
337 See also:
338 <http://fastcrypto.org/vmac>
339
340 comment "Digest"
341
342 config CRYPTO_CRC32C
343 tristate "CRC32c CRC algorithm"
344 select CRYPTO_HASH
345 select CRC32
346 help
347 Castagnoli, et al Cyclic Redundancy-Check Algorithm. Used
348 by iSCSI for header and data digests and by others.
349 See Castagnoli93. Module will be crc32c.
350
351 config CRYPTO_CRC32C_INTEL
352 tristate "CRC32c INTEL hardware acceleration"
353 depends on X86
354 select CRYPTO_HASH
355 help
356 In Intel processor with SSE4.2 supported, the processor will
357 support CRC32C implementation using hardware accelerated CRC32
358 instruction. This option will create 'crc32c-intel' module,
359 which will enable any routine to use the CRC32 instruction to
360 gain performance compared with software implementation.
361 Module will be crc32c-intel.
362
363 config CRYPTO_CRC32C_SPARC64
364 tristate "CRC32c CRC algorithm (SPARC64)"
365 depends on SPARC64
366 select CRYPTO_HASH
367 select CRC32
368 help
369 CRC32c CRC algorithm implemented using sparc64 crypto instructions,
370 when available.
371
372 config CRYPTO_CRC32
373 tristate "CRC32 CRC algorithm"
374 select CRYPTO_HASH
375 select CRC32
376 help
377 CRC-32-IEEE 802.3 cyclic redundancy-check algorithm.
378 Shash crypto api wrappers to crc32_le function.
379
380 config CRYPTO_CRC32_PCLMUL
381 tristate "CRC32 PCLMULQDQ hardware acceleration"
382 depends on X86
383 select CRYPTO_HASH
384 select CRC32
385 help
386 From Intel Westmere and AMD Bulldozer processor with SSE4.2
387 and PCLMULQDQ supported, the processor will support
388 CRC32 PCLMULQDQ implementation using hardware accelerated PCLMULQDQ
389 instruction. This option will create 'crc32-plcmul' module,
390 which will enable any routine to use the CRC-32-IEEE 802.3 checksum
391 and gain better performance as compared with the table implementation.
392
393 config CRYPTO_CRCT10DIF
394 tristate "CRCT10DIF algorithm"
395 select CRYPTO_HASH
396 help
397 CRC T10 Data Integrity Field computation is being cast as
398 a crypto transform. This allows for faster crc t10 diff
399 transforms to be used if they are available.
400
401 config CRYPTO_CRCT10DIF_PCLMUL
402 tristate "CRCT10DIF PCLMULQDQ hardware acceleration"
403 depends on X86 && 64BIT && CRC_T10DIF
404 select CRYPTO_HASH
405 help
406 For x86_64 processors with SSE4.2 and PCLMULQDQ supported,
407 CRC T10 DIF PCLMULQDQ computation can be hardware
408 accelerated PCLMULQDQ instruction. This option will create
409 'crct10dif-plcmul' module, which is faster when computing the
410 crct10dif checksum as compared with the generic table implementation.
411
412 config CRYPTO_GHASH
413 tristate "GHASH digest algorithm"
414 select CRYPTO_GF128MUL
415 help
416 GHASH is message digest algorithm for GCM (Galois/Counter Mode).
417
418 config CRYPTO_MD4
419 tristate "MD4 digest algorithm"
420 select CRYPTO_HASH
421 help
422 MD4 message digest algorithm (RFC1320).
423
424 config CRYPTO_MD5
425 tristate "MD5 digest algorithm"
426 select CRYPTO_HASH
427 help
428 MD5 message digest algorithm (RFC1321).
429
430 config CRYPTO_MD5_OCTEON
431 tristate "MD5 digest algorithm (OCTEON)"
432 depends on CPU_CAVIUM_OCTEON
433 select CRYPTO_MD5
434 select CRYPTO_HASH
435 help
436 MD5 message digest algorithm (RFC1321) implemented
437 using OCTEON crypto instructions, when available.
438
439 config CRYPTO_MD5_SPARC64
440 tristate "MD5 digest algorithm (SPARC64)"
441 depends on SPARC64
442 select CRYPTO_MD5
443 select CRYPTO_HASH
444 help
445 MD5 message digest algorithm (RFC1321) implemented
446 using sparc64 crypto instructions, when available.
447
448 config CRYPTO_MICHAEL_MIC
449 tristate "Michael MIC keyed digest algorithm"
450 select CRYPTO_HASH
451 help
452 Michael MIC is used for message integrity protection in TKIP
453 (IEEE 802.11i). This algorithm is required for TKIP, but it
454 should not be used for other purposes because of the weakness
455 of the algorithm.
456
457 config CRYPTO_RMD128
458 tristate "RIPEMD-128 digest algorithm"
459 select CRYPTO_HASH
460 help
461 RIPEMD-128 (ISO/IEC 10118-3:2004).
462
463 RIPEMD-128 is a 128-bit cryptographic hash function. It should only
464 be used as a secure replacement for RIPEMD. For other use cases,
465 RIPEMD-160 should be used.
466
467 Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
468 See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
469
470 config CRYPTO_RMD160
471 tristate "RIPEMD-160 digest algorithm"
472 select CRYPTO_HASH
473 help
474 RIPEMD-160 (ISO/IEC 10118-3:2004).
475
476 RIPEMD-160 is a 160-bit cryptographic hash function. It is intended
477 to be used as a secure replacement for the 128-bit hash functions
478 MD4, MD5 and it's predecessor RIPEMD
479 (not to be confused with RIPEMD-128).
480
481 It's speed is comparable to SHA1 and there are no known attacks
482 against RIPEMD-160.
483
484 Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
485 See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
486
487 config CRYPTO_RMD256
488 tristate "RIPEMD-256 digest algorithm"
489 select CRYPTO_HASH
490 help
491 RIPEMD-256 is an optional extension of RIPEMD-128 with a
492 256 bit hash. It is intended for applications that require
493 longer hash-results, without needing a larger security level
494 (than RIPEMD-128).
495
496 Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
497 See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
498
499 config CRYPTO_RMD320
500 tristate "RIPEMD-320 digest algorithm"
501 select CRYPTO_HASH
502 help
503 RIPEMD-320 is an optional extension of RIPEMD-160 with a
504 320 bit hash. It is intended for applications that require
505 longer hash-results, without needing a larger security level
506 (than RIPEMD-160).
507
508 Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
509 See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
510
511 config CRYPTO_SHA1
512 tristate "SHA1 digest algorithm"
513 select CRYPTO_HASH
514 help
515 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
516
517 config CRYPTO_SHA1_SSSE3
518 tristate "SHA1 digest algorithm (SSSE3/AVX/AVX2)"
519 depends on X86 && 64BIT
520 select CRYPTO_SHA1
521 select CRYPTO_HASH
522 help
523 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
524 using Supplemental SSE3 (SSSE3) instructions or Advanced Vector
525 Extensions (AVX/AVX2), when available.
526
527 config CRYPTO_SHA256_SSSE3
528 tristate "SHA256 digest algorithm (SSSE3/AVX/AVX2)"
529 depends on X86 && 64BIT
530 select CRYPTO_SHA256
531 select CRYPTO_HASH
532 help
533 SHA-256 secure hash standard (DFIPS 180-2) implemented
534 using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
535 Extensions version 1 (AVX1), or Advanced Vector Extensions
536 version 2 (AVX2) instructions, when available.
537
538 config CRYPTO_SHA512_SSSE3
539 tristate "SHA512 digest algorithm (SSSE3/AVX/AVX2)"
540 depends on X86 && 64BIT
541 select CRYPTO_SHA512
542 select CRYPTO_HASH
543 help
544 SHA-512 secure hash standard (DFIPS 180-2) implemented
545 using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
546 Extensions version 1 (AVX1), or Advanced Vector Extensions
547 version 2 (AVX2) instructions, when available.
548
549 config CRYPTO_SHA1_SPARC64
550 tristate "SHA1 digest algorithm (SPARC64)"
551 depends on SPARC64
552 select CRYPTO_SHA1
553 select CRYPTO_HASH
554 help
555 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
556 using sparc64 crypto instructions, when available.
557
558 config CRYPTO_SHA1_ARM
559 tristate "SHA1 digest algorithm (ARM-asm)"
560 depends on ARM
561 select CRYPTO_SHA1
562 select CRYPTO_HASH
563 help
564 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
565 using optimized ARM assembler.
566
567 config CRYPTO_SHA1_ARM_NEON
568 tristate "SHA1 digest algorithm (ARM NEON)"
569 depends on ARM && KERNEL_MODE_NEON
570 select CRYPTO_SHA1_ARM
571 select CRYPTO_SHA1
572 select CRYPTO_HASH
573 help
574 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
575 using optimized ARM NEON assembly, when NEON instructions are
576 available.
577
578 config CRYPTO_SHA1_PPC
579 tristate "SHA1 digest algorithm (powerpc)"
580 depends on PPC
581 help
582 This is the powerpc hardware accelerated implementation of the
583 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
584
585 config CRYPTO_SHA1_MB
586 tristate "SHA1 digest algorithm (x86_64 Multi-Buffer, Experimental)"
587 depends on X86 && 64BIT
588 select CRYPTO_SHA1
589 select CRYPTO_HASH
590 select CRYPTO_MCRYPTD
591 help
592 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
593 using multi-buffer technique. This algorithm computes on
594 multiple data lanes concurrently with SIMD instructions for
595 better throughput. It should not be enabled by default but
596 used when there is significant amount of work to keep the keep
597 the data lanes filled to get performance benefit. If the data
598 lanes remain unfilled, a flush operation will be initiated to
599 process the crypto jobs, adding a slight latency.
600
601 config CRYPTO_SHA256
602 tristate "SHA224 and SHA256 digest algorithm"
603 select CRYPTO_HASH
604 help
605 SHA256 secure hash standard (DFIPS 180-2).
606
607 This version of SHA implements a 256 bit hash with 128 bits of
608 security against collision attacks.
609
610 This code also includes SHA-224, a 224 bit hash with 112 bits
611 of security against collision attacks.
612
613 config CRYPTO_SHA256_SPARC64
614 tristate "SHA224 and SHA256 digest algorithm (SPARC64)"
615 depends on SPARC64
616 select CRYPTO_SHA256
617 select CRYPTO_HASH
618 help
619 SHA-256 secure hash standard (DFIPS 180-2) implemented
620 using sparc64 crypto instructions, when available.
621
622 config CRYPTO_SHA512
623 tristate "SHA384 and SHA512 digest algorithms"
624 select CRYPTO_HASH
625 help
626 SHA512 secure hash standard (DFIPS 180-2).
627
628 This version of SHA implements a 512 bit hash with 256 bits of
629 security against collision attacks.
630
631 This code also includes SHA-384, a 384 bit hash with 192 bits
632 of security against collision attacks.
633
634 config CRYPTO_SHA512_SPARC64
635 tristate "SHA384 and SHA512 digest algorithm (SPARC64)"
636 depends on SPARC64
637 select CRYPTO_SHA512
638 select CRYPTO_HASH
639 help
640 SHA-512 secure hash standard (DFIPS 180-2) implemented
641 using sparc64 crypto instructions, when available.
642
643 config CRYPTO_SHA512_ARM_NEON
644 tristate "SHA384 and SHA512 digest algorithm (ARM NEON)"
645 depends on ARM && KERNEL_MODE_NEON
646 select CRYPTO_SHA512
647 select CRYPTO_HASH
648 help
649 SHA-512 secure hash standard (DFIPS 180-2) implemented
650 using ARM NEON instructions, when available.
651
652 This version of SHA implements a 512 bit hash with 256 bits of
653 security against collision attacks.
654
655 This code also includes SHA-384, a 384 bit hash with 192 bits
656 of security against collision attacks.
657
658 config CRYPTO_TGR192
659 tristate "Tiger digest algorithms"
660 select CRYPTO_HASH
661 help
662 Tiger hash algorithm 192, 160 and 128-bit hashes
663
664 Tiger is a hash function optimized for 64-bit processors while
665 still having decent performance on 32-bit processors.
666 Tiger was developed by Ross Anderson and Eli Biham.
667
668 See also:
669 <http://www.cs.technion.ac.il/~biham/Reports/Tiger/>.
670
671 config CRYPTO_WP512
672 tristate "Whirlpool digest algorithms"
673 select CRYPTO_HASH
674 help
675 Whirlpool hash algorithm 512, 384 and 256-bit hashes
676
677 Whirlpool-512 is part of the NESSIE cryptographic primitives.
678 Whirlpool will be part of the ISO/IEC 10118-3:2003(E) standard
679
680 See also:
681 <http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html>
682
683 config CRYPTO_GHASH_CLMUL_NI_INTEL
684 tristate "GHASH digest algorithm (CLMUL-NI accelerated)"
685 depends on X86 && 64BIT
686 select CRYPTO_CRYPTD
687 help
688 GHASH is message digest algorithm for GCM (Galois/Counter Mode).
689 The implementation is accelerated by CLMUL-NI of Intel.
690
691 comment "Ciphers"
692
693 config CRYPTO_AES
694 tristate "AES cipher algorithms"
695 select CRYPTO_ALGAPI
696 help
697 AES cipher algorithms (FIPS-197). AES uses the Rijndael
698 algorithm.
699
700 Rijndael appears to be consistently a very good performer in
701 both hardware and software across a wide range of computing
702 environments regardless of its use in feedback or non-feedback
703 modes. Its key setup time is excellent, and its key agility is
704 good. Rijndael's very low memory requirements make it very well
705 suited for restricted-space environments, in which it also
706 demonstrates excellent performance. Rijndael's operations are
707 among the easiest to defend against power and timing attacks.
708
709 The AES specifies three key sizes: 128, 192 and 256 bits
710
711 See <http://csrc.nist.gov/CryptoToolkit/aes/> for more information.
712
713 config CRYPTO_AES_586
714 tristate "AES cipher algorithms (i586)"
715 depends on (X86 || UML_X86) && !64BIT
716 select CRYPTO_ALGAPI
717 select CRYPTO_AES
718 help
719 AES cipher algorithms (FIPS-197). AES uses the Rijndael
720 algorithm.
721
722 Rijndael appears to be consistently a very good performer in
723 both hardware and software across a wide range of computing
724 environments regardless of its use in feedback or non-feedback
725 modes. Its key setup time is excellent, and its key agility is
726 good. Rijndael's very low memory requirements make it very well
727 suited for restricted-space environments, in which it also
728 demonstrates excellent performance. Rijndael's operations are
729 among the easiest to defend against power and timing attacks.
730
731 The AES specifies three key sizes: 128, 192 and 256 bits
732
733 See <http://csrc.nist.gov/encryption/aes/> for more information.
734
735 config CRYPTO_AES_X86_64
736 tristate "AES cipher algorithms (x86_64)"
737 depends on (X86 || UML_X86) && 64BIT
738 select CRYPTO_ALGAPI
739 select CRYPTO_AES
740 help
741 AES cipher algorithms (FIPS-197). AES uses the Rijndael
742 algorithm.
743
744 Rijndael appears to be consistently a very good performer in
745 both hardware and software across a wide range of computing
746 environments regardless of its use in feedback or non-feedback
747 modes. Its key setup time is excellent, and its key agility is
748 good. Rijndael's very low memory requirements make it very well
749 suited for restricted-space environments, in which it also
750 demonstrates excellent performance. Rijndael's operations are
751 among the easiest to defend against power and timing attacks.
752
753 The AES specifies three key sizes: 128, 192 and 256 bits
754
755 See <http://csrc.nist.gov/encryption/aes/> for more information.
756
757 config CRYPTO_AES_NI_INTEL
758 tristate "AES cipher algorithms (AES-NI)"
759 depends on X86
760 select CRYPTO_AES_X86_64 if 64BIT
761 select CRYPTO_AES_586 if !64BIT
762 select CRYPTO_CRYPTD
763 select CRYPTO_ABLK_HELPER
764 select CRYPTO_ALGAPI
765 select CRYPTO_GLUE_HELPER_X86 if 64BIT
766 select CRYPTO_LRW
767 select CRYPTO_XTS
768 help
769 Use Intel AES-NI instructions for AES algorithm.
770
771 AES cipher algorithms (FIPS-197). AES uses the Rijndael
772 algorithm.
773
774 Rijndael appears to be consistently a very good performer in
775 both hardware and software across a wide range of computing
776 environments regardless of its use in feedback or non-feedback
777 modes. Its key setup time is excellent, and its key agility is
778 good. Rijndael's very low memory requirements make it very well
779 suited for restricted-space environments, in which it also
780 demonstrates excellent performance. Rijndael's operations are
781 among the easiest to defend against power and timing attacks.
782
783 The AES specifies three key sizes: 128, 192 and 256 bits
784
785 See <http://csrc.nist.gov/encryption/aes/> for more information.
786
787 In addition to AES cipher algorithm support, the acceleration
788 for some popular block cipher mode is supported too, including
789 ECB, CBC, LRW, PCBC, XTS. The 64 bit version has additional
790 acceleration for CTR.
791
792 config CRYPTO_AES_SPARC64
793 tristate "AES cipher algorithms (SPARC64)"
794 depends on SPARC64
795 select CRYPTO_CRYPTD
796 select CRYPTO_ALGAPI
797 help
798 Use SPARC64 crypto opcodes for AES algorithm.
799
800 AES cipher algorithms (FIPS-197). AES uses the Rijndael
801 algorithm.
802
803 Rijndael appears to be consistently a very good performer in
804 both hardware and software across a wide range of computing
805 environments regardless of its use in feedback or non-feedback
806 modes. Its key setup time is excellent, and its key agility is
807 good. Rijndael's very low memory requirements make it very well
808 suited for restricted-space environments, in which it also
809 demonstrates excellent performance. Rijndael's operations are
810 among the easiest to defend against power and timing attacks.
811
812 The AES specifies three key sizes: 128, 192 and 256 bits
813
814 See <http://csrc.nist.gov/encryption/aes/> for more information.
815
816 In addition to AES cipher algorithm support, the acceleration
817 for some popular block cipher mode is supported too, including
818 ECB and CBC.
819
820 config CRYPTO_AES_ARM
821 tristate "AES cipher algorithms (ARM-asm)"
822 depends on ARM
823 select CRYPTO_ALGAPI
824 select CRYPTO_AES
825 help
826 Use optimized AES assembler routines for ARM platforms.
827
828 AES cipher algorithms (FIPS-197). AES uses the Rijndael
829 algorithm.
830
831 Rijndael appears to be consistently a very good performer in
832 both hardware and software across a wide range of computing
833 environments regardless of its use in feedback or non-feedback
834 modes. Its key setup time is excellent, and its key agility is
835 good. Rijndael's very low memory requirements make it very well
836 suited for restricted-space environments, in which it also
837 demonstrates excellent performance. Rijndael's operations are
838 among the easiest to defend against power and timing attacks.
839
840 The AES specifies three key sizes: 128, 192 and 256 bits
841
842 See <http://csrc.nist.gov/encryption/aes/> for more information.
843
844 config CRYPTO_AES_ARM_BS
845 tristate "Bit sliced AES using NEON instructions"
846 depends on ARM && KERNEL_MODE_NEON
847 select CRYPTO_ALGAPI
848 select CRYPTO_AES_ARM
849 select CRYPTO_ABLK_HELPER
850 help
851 Use a faster and more secure NEON based implementation of AES in CBC,
852 CTR and XTS modes
853
854 Bit sliced AES gives around 45% speedup on Cortex-A15 for CTR mode
855 and for XTS mode encryption, CBC and XTS mode decryption speedup is
856 around 25%. (CBC encryption speed is not affected by this driver.)
857 This implementation does not rely on any lookup tables so it is
858 believed to be invulnerable to cache timing attacks.
859
860 config CRYPTO_ANUBIS
861 tristate "Anubis cipher algorithm"
862 select CRYPTO_ALGAPI
863 help
864 Anubis cipher algorithm.
865
866 Anubis is a variable key length cipher which can use keys from
867 128 bits to 320 bits in length. It was evaluated as a entrant
868 in the NESSIE competition.
869
870 See also:
871 <https://www.cosic.esat.kuleuven.be/nessie/reports/>
872 <http://www.larc.usp.br/~pbarreto/AnubisPage.html>
873
874 config CRYPTO_ARC4
875 tristate "ARC4 cipher algorithm"
876 select CRYPTO_BLKCIPHER
877 help
878 ARC4 cipher algorithm.
879
880 ARC4 is a stream cipher using keys ranging from 8 bits to 2048
881 bits in length. This algorithm is required for driver-based
882 WEP, but it should not be for other purposes because of the
883 weakness of the algorithm.
884
885 config CRYPTO_BLOWFISH
886 tristate "Blowfish cipher algorithm"
887 select CRYPTO_ALGAPI
888 select CRYPTO_BLOWFISH_COMMON
889 help
890 Blowfish cipher algorithm, by Bruce Schneier.
891
892 This is a variable key length cipher which can use keys from 32
893 bits to 448 bits in length. It's fast, simple and specifically
894 designed for use on "large microprocessors".
895
896 See also:
897 <http://www.schneier.com/blowfish.html>
898
899 config CRYPTO_BLOWFISH_COMMON
900 tristate
901 help
902 Common parts of the Blowfish cipher algorithm shared by the
903 generic c and the assembler implementations.
904
905 See also:
906 <http://www.schneier.com/blowfish.html>
907
908 config CRYPTO_BLOWFISH_X86_64
909 tristate "Blowfish cipher algorithm (x86_64)"
910 depends on X86 && 64BIT
911 select CRYPTO_ALGAPI
912 select CRYPTO_BLOWFISH_COMMON
913 help
914 Blowfish cipher algorithm (x86_64), by Bruce Schneier.
915
916 This is a variable key length cipher which can use keys from 32
917 bits to 448 bits in length. It's fast, simple and specifically
918 designed for use on "large microprocessors".
919
920 See also:
921 <http://www.schneier.com/blowfish.html>
922
923 config CRYPTO_CAMELLIA
924 tristate "Camellia cipher algorithms"
925 depends on CRYPTO
926 select CRYPTO_ALGAPI
927 help
928 Camellia cipher algorithms module.
929
930 Camellia is a symmetric key block cipher developed jointly
931 at NTT and Mitsubishi Electric Corporation.
932
933 The Camellia specifies three key sizes: 128, 192 and 256 bits.
934
935 See also:
936 <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
937
938 config CRYPTO_CAMELLIA_X86_64
939 tristate "Camellia cipher algorithm (x86_64)"
940 depends on X86 && 64BIT
941 depends on CRYPTO
942 select CRYPTO_ALGAPI
943 select CRYPTO_GLUE_HELPER_X86
944 select CRYPTO_LRW
945 select CRYPTO_XTS
946 help
947 Camellia cipher algorithm module (x86_64).
948
949 Camellia is a symmetric key block cipher developed jointly
950 at NTT and Mitsubishi Electric Corporation.
951
952 The Camellia specifies three key sizes: 128, 192 and 256 bits.
953
954 See also:
955 <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
956
957 config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
958 tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX)"
959 depends on X86 && 64BIT
960 depends on CRYPTO
961 select CRYPTO_ALGAPI
962 select CRYPTO_CRYPTD
963 select CRYPTO_ABLK_HELPER
964 select CRYPTO_GLUE_HELPER_X86
965 select CRYPTO_CAMELLIA_X86_64
966 select CRYPTO_LRW
967 select CRYPTO_XTS
968 help
969 Camellia cipher algorithm module (x86_64/AES-NI/AVX).
970
971 Camellia is a symmetric key block cipher developed jointly
972 at NTT and Mitsubishi Electric Corporation.
973
974 The Camellia specifies three key sizes: 128, 192 and 256 bits.
975
976 See also:
977 <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
978
979 config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64
980 tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX2)"
981 depends on X86 && 64BIT
982 depends on CRYPTO
983 select CRYPTO_ALGAPI
984 select CRYPTO_CRYPTD
985 select CRYPTO_ABLK_HELPER
986 select CRYPTO_GLUE_HELPER_X86
987 select CRYPTO_CAMELLIA_X86_64
988 select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
989 select CRYPTO_LRW
990 select CRYPTO_XTS
991 help
992 Camellia cipher algorithm module (x86_64/AES-NI/AVX2).
993
994 Camellia is a symmetric key block cipher developed jointly
995 at NTT and Mitsubishi Electric Corporation.
996
997 The Camellia specifies three key sizes: 128, 192 and 256 bits.
998
999 See also:
1000 <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
1001
1002 config CRYPTO_CAMELLIA_SPARC64
1003 tristate "Camellia cipher algorithm (SPARC64)"
1004 depends on SPARC64
1005 depends on CRYPTO
1006 select CRYPTO_ALGAPI
1007 help
1008 Camellia cipher algorithm module (SPARC64).
1009
1010 Camellia is a symmetric key block cipher developed jointly
1011 at NTT and Mitsubishi Electric Corporation.
1012
1013 The Camellia specifies three key sizes: 128, 192 and 256 bits.
1014
1015 See also:
1016 <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
1017
1018 config CRYPTO_CAST_COMMON
1019 tristate
1020 help
1021 Common parts of the CAST cipher algorithms shared by the
1022 generic c and the assembler implementations.
1023
1024 config CRYPTO_CAST5
1025 tristate "CAST5 (CAST-128) cipher algorithm"
1026 select CRYPTO_ALGAPI
1027 select CRYPTO_CAST_COMMON
1028 help
1029 The CAST5 encryption algorithm (synonymous with CAST-128) is
1030 described in RFC2144.
1031
1032 config CRYPTO_CAST5_AVX_X86_64
1033 tristate "CAST5 (CAST-128) cipher algorithm (x86_64/AVX)"
1034 depends on X86 && 64BIT
1035 select CRYPTO_ALGAPI
1036 select CRYPTO_CRYPTD
1037 select CRYPTO_ABLK_HELPER
1038 select CRYPTO_CAST_COMMON
1039 select CRYPTO_CAST5
1040 help
1041 The CAST5 encryption algorithm (synonymous with CAST-128) is
1042 described in RFC2144.
1043
1044 This module provides the Cast5 cipher algorithm that processes
1045 sixteen blocks parallel using the AVX instruction set.
1046
1047 config CRYPTO_CAST6
1048 tristate "CAST6 (CAST-256) cipher algorithm"
1049 select CRYPTO_ALGAPI
1050 select CRYPTO_CAST_COMMON
1051 help
1052 The CAST6 encryption algorithm (synonymous with CAST-256) is
1053 described in RFC2612.
1054
1055 config CRYPTO_CAST6_AVX_X86_64
1056 tristate "CAST6 (CAST-256) cipher algorithm (x86_64/AVX)"
1057 depends on X86 && 64BIT
1058 select CRYPTO_ALGAPI
1059 select CRYPTO_CRYPTD
1060 select CRYPTO_ABLK_HELPER
1061 select CRYPTO_GLUE_HELPER_X86
1062 select CRYPTO_CAST_COMMON
1063 select CRYPTO_CAST6
1064 select CRYPTO_LRW
1065 select CRYPTO_XTS
1066 help
1067 The CAST6 encryption algorithm (synonymous with CAST-256) is
1068 described in RFC2612.
1069
1070 This module provides the Cast6 cipher algorithm that processes
1071 eight blocks parallel using the AVX instruction set.
1072
1073 config CRYPTO_DES
1074 tristate "DES and Triple DES EDE cipher algorithms"
1075 select CRYPTO_ALGAPI
1076 help
1077 DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
1078
1079 config CRYPTO_DES_SPARC64
1080 tristate "DES and Triple DES EDE cipher algorithms (SPARC64)"
1081 depends on SPARC64
1082 select CRYPTO_ALGAPI
1083 select CRYPTO_DES
1084 help
1085 DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3),
1086 optimized using SPARC64 crypto opcodes.
1087
1088 config CRYPTO_DES3_EDE_X86_64
1089 tristate "Triple DES EDE cipher algorithm (x86-64)"
1090 depends on X86 && 64BIT
1091 select CRYPTO_ALGAPI
1092 select CRYPTO_DES
1093 help
1094 Triple DES EDE (FIPS 46-3) algorithm.
1095
1096 This module provides implementation of the Triple DES EDE cipher
1097 algorithm that is optimized for x86-64 processors. Two versions of
1098 algorithm are provided; regular processing one input block and
1099 one that processes three blocks parallel.
1100
1101 config CRYPTO_FCRYPT
1102 tristate "FCrypt cipher algorithm"
1103 select CRYPTO_ALGAPI
1104 select CRYPTO_BLKCIPHER
1105 help
1106 FCrypt algorithm used by RxRPC.
1107
1108 config CRYPTO_KHAZAD
1109 tristate "Khazad cipher algorithm"
1110 select CRYPTO_ALGAPI
1111 help
1112 Khazad cipher algorithm.
1113
1114 Khazad was a finalist in the initial NESSIE competition. It is
1115 an algorithm optimized for 64-bit processors with good performance
1116 on 32-bit processors. Khazad uses an 128 bit key size.
1117
1118 See also:
1119 <http://www.larc.usp.br/~pbarreto/KhazadPage.html>
1120
1121 config CRYPTO_SALSA20
1122 tristate "Salsa20 stream cipher algorithm"
1123 select CRYPTO_BLKCIPHER
1124 help
1125 Salsa20 stream cipher algorithm.
1126
1127 Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
1128 Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
1129
1130 The Salsa20 stream cipher algorithm is designed by Daniel J.
1131 Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
1132
1133 config CRYPTO_SALSA20_586
1134 tristate "Salsa20 stream cipher algorithm (i586)"
1135 depends on (X86 || UML_X86) && !64BIT
1136 select CRYPTO_BLKCIPHER
1137 help
1138 Salsa20 stream cipher algorithm.
1139
1140 Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
1141 Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
1142
1143 The Salsa20 stream cipher algorithm is designed by Daniel J.
1144 Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
1145
1146 config CRYPTO_SALSA20_X86_64
1147 tristate "Salsa20 stream cipher algorithm (x86_64)"
1148 depends on (X86 || UML_X86) && 64BIT
1149 select CRYPTO_BLKCIPHER
1150 help
1151 Salsa20 stream cipher algorithm.
1152
1153 Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
1154 Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
1155
1156 The Salsa20 stream cipher algorithm is designed by Daniel J.
1157 Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
1158
1159 config CRYPTO_SEED
1160 tristate "SEED cipher algorithm"
1161 select CRYPTO_ALGAPI
1162 help
1163 SEED cipher algorithm (RFC4269).
1164
1165 SEED is a 128-bit symmetric key block cipher that has been
1166 developed by KISA (Korea Information Security Agency) as a
1167 national standard encryption algorithm of the Republic of Korea.
1168 It is a 16 round block cipher with the key size of 128 bit.
1169
1170 See also:
1171 <http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp>
1172
1173 config CRYPTO_SERPENT
1174 tristate "Serpent cipher algorithm"
1175 select CRYPTO_ALGAPI
1176 help
1177 Serpent cipher algorithm, by Anderson, Biham & Knudsen.
1178
1179 Keys are allowed to be from 0 to 256 bits in length, in steps
1180 of 8 bits. Also includes the 'Tnepres' algorithm, a reversed
1181 variant of Serpent for compatibility with old kerneli.org code.
1182
1183 See also:
1184 <http://www.cl.cam.ac.uk/~rja14/serpent.html>
1185
1186 config CRYPTO_SERPENT_SSE2_X86_64
1187 tristate "Serpent cipher algorithm (x86_64/SSE2)"
1188 depends on X86 && 64BIT
1189 select CRYPTO_ALGAPI
1190 select CRYPTO_CRYPTD
1191 select CRYPTO_ABLK_HELPER
1192 select CRYPTO_GLUE_HELPER_X86
1193 select CRYPTO_SERPENT
1194 select CRYPTO_LRW
1195 select CRYPTO_XTS
1196 help
1197 Serpent cipher algorithm, by Anderson, Biham & Knudsen.
1198
1199 Keys are allowed to be from 0 to 256 bits in length, in steps
1200 of 8 bits.
1201
1202 This module provides Serpent cipher algorithm that processes eigth
1203 blocks parallel using SSE2 instruction set.
1204
1205 See also:
1206 <http://www.cl.cam.ac.uk/~rja14/serpent.html>
1207
1208 config CRYPTO_SERPENT_SSE2_586
1209 tristate "Serpent cipher algorithm (i586/SSE2)"
1210 depends on X86 && !64BIT
1211 select CRYPTO_ALGAPI
1212 select CRYPTO_CRYPTD
1213 select CRYPTO_ABLK_HELPER
1214 select CRYPTO_GLUE_HELPER_X86
1215 select CRYPTO_SERPENT
1216 select CRYPTO_LRW
1217 select CRYPTO_XTS
1218 help
1219 Serpent cipher algorithm, by Anderson, Biham & Knudsen.
1220
1221 Keys are allowed to be from 0 to 256 bits in length, in steps
1222 of 8 bits.
1223
1224 This module provides Serpent cipher algorithm that processes four
1225 blocks parallel using SSE2 instruction set.
1226
1227 See also:
1228 <http://www.cl.cam.ac.uk/~rja14/serpent.html>
1229
1230 config CRYPTO_SERPENT_AVX_X86_64
1231 tristate "Serpent cipher algorithm (x86_64/AVX)"
1232 depends on X86 && 64BIT
1233 select CRYPTO_ALGAPI
1234 select CRYPTO_CRYPTD
1235 select CRYPTO_ABLK_HELPER
1236 select CRYPTO_GLUE_HELPER_X86
1237 select CRYPTO_SERPENT
1238 select CRYPTO_LRW
1239 select CRYPTO_XTS
1240 help
1241 Serpent cipher algorithm, by Anderson, Biham & Knudsen.
1242
1243 Keys are allowed to be from 0 to 256 bits in length, in steps
1244 of 8 bits.
1245
1246 This module provides the Serpent cipher algorithm that processes
1247 eight blocks parallel using the AVX instruction set.
1248
1249 See also:
1250 <http://www.cl.cam.ac.uk/~rja14/serpent.html>
1251
1252 config CRYPTO_SERPENT_AVX2_X86_64
1253 tristate "Serpent cipher algorithm (x86_64/AVX2)"
1254 depends on X86 && 64BIT
1255 select CRYPTO_ALGAPI
1256 select CRYPTO_CRYPTD
1257 select CRYPTO_ABLK_HELPER
1258 select CRYPTO_GLUE_HELPER_X86
1259 select CRYPTO_SERPENT
1260 select CRYPTO_SERPENT_AVX_X86_64
1261 select CRYPTO_LRW
1262 select CRYPTO_XTS
1263 help
1264 Serpent cipher algorithm, by Anderson, Biham & Knudsen.
1265
1266 Keys are allowed to be from 0 to 256 bits in length, in steps
1267 of 8 bits.
1268
1269 This module provides Serpent cipher algorithm that processes 16
1270 blocks parallel using AVX2 instruction set.
1271
1272 See also:
1273 <http://www.cl.cam.ac.uk/~rja14/serpent.html>
1274
1275 config CRYPTO_TEA
1276 tristate "TEA, XTEA and XETA cipher algorithms"
1277 select CRYPTO_ALGAPI
1278 help
1279 TEA cipher algorithm.
1280
1281 Tiny Encryption Algorithm is a simple cipher that uses
1282 many rounds for security. It is very fast and uses
1283 little memory.
1284
1285 Xtendend Tiny Encryption Algorithm is a modification to
1286 the TEA algorithm to address a potential key weakness
1287 in the TEA algorithm.
1288
1289 Xtendend Encryption Tiny Algorithm is a mis-implementation
1290 of the XTEA algorithm for compatibility purposes.
1291
1292 config CRYPTO_TWOFISH
1293 tristate "Twofish cipher algorithm"
1294 select CRYPTO_ALGAPI
1295 select CRYPTO_TWOFISH_COMMON
1296 help
1297 Twofish cipher algorithm.
1298
1299 Twofish was submitted as an AES (Advanced Encryption Standard)
1300 candidate cipher by researchers at CounterPane Systems. It is a
1301 16 round block cipher supporting key sizes of 128, 192, and 256
1302 bits.
1303
1304 See also:
1305 <http://www.schneier.com/twofish.html>
1306
1307 config CRYPTO_TWOFISH_COMMON
1308 tristate
1309 help
1310 Common parts of the Twofish cipher algorithm shared by the
1311 generic c and the assembler implementations.
1312
1313 config CRYPTO_TWOFISH_586
1314 tristate "Twofish cipher algorithms (i586)"
1315 depends on (X86 || UML_X86) && !64BIT
1316 select CRYPTO_ALGAPI
1317 select CRYPTO_TWOFISH_COMMON
1318 help
1319 Twofish cipher algorithm.
1320
1321 Twofish was submitted as an AES (Advanced Encryption Standard)
1322 candidate cipher by researchers at CounterPane Systems. It is a
1323 16 round block cipher supporting key sizes of 128, 192, and 256
1324 bits.
1325
1326 See also:
1327 <http://www.schneier.com/twofish.html>
1328
1329 config CRYPTO_TWOFISH_X86_64
1330 tristate "Twofish cipher algorithm (x86_64)"
1331 depends on (X86 || UML_X86) && 64BIT
1332 select CRYPTO_ALGAPI
1333 select CRYPTO_TWOFISH_COMMON
1334 help
1335 Twofish cipher algorithm (x86_64).
1336
1337 Twofish was submitted as an AES (Advanced Encryption Standard)
1338 candidate cipher by researchers at CounterPane Systems. It is a
1339 16 round block cipher supporting key sizes of 128, 192, and 256
1340 bits.
1341
1342 See also:
1343 <http://www.schneier.com/twofish.html>
1344
1345 config CRYPTO_TWOFISH_X86_64_3WAY
1346 tristate "Twofish cipher algorithm (x86_64, 3-way parallel)"
1347 depends on X86 && 64BIT
1348 select CRYPTO_ALGAPI
1349 select CRYPTO_TWOFISH_COMMON
1350 select CRYPTO_TWOFISH_X86_64
1351 select CRYPTO_GLUE_HELPER_X86
1352 select CRYPTO_LRW
1353 select CRYPTO_XTS
1354 help
1355 Twofish cipher algorithm (x86_64, 3-way parallel).
1356
1357 Twofish was submitted as an AES (Advanced Encryption Standard)
1358 candidate cipher by researchers at CounterPane Systems. It is a
1359 16 round block cipher supporting key sizes of 128, 192, and 256
1360 bits.
1361
1362 This module provides Twofish cipher algorithm that processes three
1363 blocks parallel, utilizing resources of out-of-order CPUs better.
1364
1365 See also:
1366 <http://www.schneier.com/twofish.html>
1367
1368 config CRYPTO_TWOFISH_AVX_X86_64
1369 tristate "Twofish cipher algorithm (x86_64/AVX)"
1370 depends on X86 && 64BIT
1371 select CRYPTO_ALGAPI
1372 select CRYPTO_CRYPTD
1373 select CRYPTO_ABLK_HELPER
1374 select CRYPTO_GLUE_HELPER_X86
1375 select CRYPTO_TWOFISH_COMMON
1376 select CRYPTO_TWOFISH_X86_64
1377 select CRYPTO_TWOFISH_X86_64_3WAY
1378 select CRYPTO_LRW
1379 select CRYPTO_XTS
1380 help
1381 Twofish cipher algorithm (x86_64/AVX).
1382
1383 Twofish was submitted as an AES (Advanced Encryption Standard)
1384 candidate cipher by researchers at CounterPane Systems. It is a
1385 16 round block cipher supporting key sizes of 128, 192, and 256
1386 bits.
1387
1388 This module provides the Twofish cipher algorithm that processes
1389 eight blocks parallel using the AVX Instruction Set.
1390
1391 See also:
1392 <http://www.schneier.com/twofish.html>
1393
1394 comment "Compression"
1395
1396 config CRYPTO_DEFLATE
1397 tristate "Deflate compression algorithm"
1398 select CRYPTO_ALGAPI
1399 select ZLIB_INFLATE
1400 select ZLIB_DEFLATE
1401 help
1402 This is the Deflate algorithm (RFC1951), specified for use in
1403 IPSec with the IPCOMP protocol (RFC3173, RFC2394).
1404
1405 You will most probably want this if using IPSec.
1406
1407 config CRYPTO_ZLIB
1408 tristate "Zlib compression algorithm"
1409 select CRYPTO_PCOMP
1410 select ZLIB_INFLATE
1411 select ZLIB_DEFLATE
1412 select NLATTR
1413 help
1414 This is the zlib algorithm.
1415
1416 config CRYPTO_LZO
1417 tristate "LZO compression algorithm"
1418 select CRYPTO_ALGAPI
1419 select LZO_COMPRESS
1420 select LZO_DECOMPRESS
1421 help
1422 This is the LZO algorithm.
1423
1424 config CRYPTO_842
1425 tristate "842 compression algorithm"
1426 depends on CRYPTO_DEV_NX_COMPRESS
1427 # 842 uses lzo if the hardware becomes unavailable
1428 select LZO_COMPRESS
1429 select LZO_DECOMPRESS
1430 help
1431 This is the 842 algorithm.
1432
1433 config CRYPTO_LZ4
1434 tristate "LZ4 compression algorithm"
1435 select CRYPTO_ALGAPI
1436 select LZ4_COMPRESS
1437 select LZ4_DECOMPRESS
1438 help
1439 This is the LZ4 algorithm.
1440
1441 config CRYPTO_LZ4HC
1442 tristate "LZ4HC compression algorithm"
1443 select CRYPTO_ALGAPI
1444 select LZ4HC_COMPRESS
1445 select LZ4_DECOMPRESS
1446 help
1447 This is the LZ4 high compression mode algorithm.
1448
1449 comment "Random Number Generation"
1450
1451 config CRYPTO_ANSI_CPRNG
1452 tristate "Pseudo Random Number Generation for Cryptographic modules"
1453 default m
1454 select CRYPTO_AES
1455 select CRYPTO_RNG
1456 help
1457 This option enables the generic pseudo random number generator
1458 for cryptographic modules. Uses the Algorithm specified in
1459 ANSI X9.31 A.2.4. Note that this option must be enabled if
1460 CRYPTO_FIPS is selected
1461
1462 menuconfig CRYPTO_DRBG_MENU
1463 tristate "NIST SP800-90A DRBG"
1464 help
1465 NIST SP800-90A compliant DRBG. In the following submenu, one or
1466 more of the DRBG types must be selected.
1467
1468 if CRYPTO_DRBG_MENU
1469
1470 config CRYPTO_DRBG_HMAC
1471 bool "Enable HMAC DRBG"
1472 default y
1473 select CRYPTO_HMAC
1474 help
1475 Enable the HMAC DRBG variant as defined in NIST SP800-90A.
1476
1477 config CRYPTO_DRBG_HASH
1478 bool "Enable Hash DRBG"
1479 select CRYPTO_HASH
1480 help
1481 Enable the Hash DRBG variant as defined in NIST SP800-90A.
1482
1483 config CRYPTO_DRBG_CTR
1484 bool "Enable CTR DRBG"
1485 select CRYPTO_AES
1486 help
1487 Enable the CTR DRBG variant as defined in NIST SP800-90A.
1488
1489 config CRYPTO_DRBG
1490 tristate
1491 default CRYPTO_DRBG_MENU if (CRYPTO_DRBG_HMAC || CRYPTO_DRBG_HASH || CRYPTO_DRBG_CTR)
1492 select CRYPTO_RNG
1493
1494 endif # if CRYPTO_DRBG_MENU
1495
1496 config CRYPTO_USER_API
1497 tristate
1498
1499 config CRYPTO_USER_API_HASH
1500 tristate "User-space interface for hash algorithms"
1501 depends on NET
1502 select CRYPTO_HASH
1503 select CRYPTO_USER_API
1504 help
1505 This option enables the user-spaces interface for hash
1506 algorithms.
1507
1508 config CRYPTO_USER_API_SKCIPHER
1509 tristate "User-space interface for symmetric key cipher algorithms"
1510 depends on NET
1511 select CRYPTO_BLKCIPHER
1512 select CRYPTO_USER_API
1513 help
1514 This option enables the user-spaces interface for symmetric
1515 key cipher algorithms.
1516
1517 config CRYPTO_USER_API_RNG
1518 tristate "User-space interface for random number generator algorithms"
1519 depends on NET
1520 select CRYPTO_RNG
1521 select CRYPTO_USER_API
1522 help
1523 This option enables the user-spaces interface for random
1524 number generator algorithms.
1525
1526 config CRYPTO_HASH_INFO
1527 bool
1528
1529 source "drivers/crypto/Kconfig"
1530 source crypto/asymmetric_keys/Kconfig
1531
1532 endif # if CRYPTO
This page took 0.062003 seconds and 5 git commands to generate.