drivers/acpi/acpica/exstore.c

   1
   2 /******************************************************************************
   3  *
   4  * Module Name: exstore - AML Interpreter object store support
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2010, Intel Corp.
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45 #include <acpi/acpi.h>
  46 #include "accommon.h"
  47 #include "acdispat.h"
  48 #include "acinterp.h"
  49 #include "amlcode.h"
  50 #include "acnamesp.h"
  51
  52 #define _COMPONENT          ACPI_EXECUTER
  53 ACPI_MODULE_NAME("exstore")
  54
  55 /* Local prototypes */
  56 static void
  57 acpi_ex_do_debug_object(union acpi_operand_object *source_desc,
  58                         u32 level, u32 index);
  59
  60 static acpi_status
  61 acpi_ex_store_object_to_index(union acpi_operand_object *val_desc,
  62                               union acpi_operand_object *dest_desc,
  63                               struct acpi_walk_state *walk_state);
  64
  65 /*******************************************************************************
  66  *
  67  * FUNCTION:    acpi_ex_do_debug_object
  68  *
  69  * PARAMETERS:  source_desc         - Value to be stored
  70  *              Level               - Indentation level (used for packages)
  71  *              Index               - Current package element, zero if not pkg
  72  *
  73  * RETURN:      None
  74  *
  75  * DESCRIPTION: Handles stores to the Debug Object.
  76  *
  77  ******************************************************************************/
  78
  79 static void
  80 acpi_ex_do_debug_object(union acpi_operand_object *source_desc,
  81                         u32 level, u32 index)
  82 {
  83         u32 i;
  84
  85         ACPI_FUNCTION_TRACE_PTR(ex_do_debug_object, source_desc);
  86
  87         /* Print line header as long as we are not in the middle of an object display */
  88
  89         if (!((level > 0) && index == 0)) {
  90                 ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[ACPI Debug] %*s",
  91                                       level, " "));
  92         }
  93
  94         /* Display index for package output only */
  95
  96         if (index > 0) {
  97                 ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
  98                                       "(%.2u) ", index - 1));
  99         }
 100
 101         if (!source_desc) {
 102                 ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[Null Object]\n"));
 103                 return_VOID;
 104         }
 105
 106         if (ACPI_GET_DESCRIPTOR_TYPE(source_desc) == ACPI_DESC_TYPE_OPERAND) {
 107                 ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "%s ",
 108                                       acpi_ut_get_object_type_name
 109                                       (source_desc)));
 110
 111                 if (!acpi_ut_valid_internal_object(source_desc)) {
 112                         ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
 113                                               "%p, Invalid Internal Object!\n",
 114                                               source_desc));
 115                         return_VOID;
 116                 }
 117         } else if (ACPI_GET_DESCRIPTOR_TYPE(source_desc) ==
 118                    ACPI_DESC_TYPE_NAMED) {
 119                 ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "%s: %p\n",
 120                                       acpi_ut_get_type_name(((struct
 121                                                               acpi_namespace_node
 122                                                               *)source_desc)->
 123                                                             type),
 124                                       source_desc));
 125                 return_VOID;
 126         } else {
 127                 return_VOID;
 128         }
 129
 130         /* source_desc is of type ACPI_DESC_TYPE_OPERAND */
 131
 132         switch (source_desc->common.type) {
 133         case ACPI_TYPE_INTEGER:
 134
 135                 /* Output correct integer width */
 136
 137                 if (acpi_gbl_integer_byte_width == 4) {
 138                         ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "0x%8.8X\n",
 139                                               (u32) source_desc->integer.
 140                                               value));
 141                 } else {
 142                         ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
 143                                               "0x%8.8X%8.8X\n",
 144                                               ACPI_FORMAT_UINT64(source_desc->
 145                                                                  integer.
 146                                                                  value)));
 147                 }
 148                 break;
 149
 150         case ACPI_TYPE_BUFFER:
 151
 152                 ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[0x%.2X]\n",
 153                                       (u32) source_desc->buffer.length));
 154                 ACPI_DUMP_BUFFER(source_desc->buffer.pointer,
 155                                  (source_desc->buffer.length <
 156                                   256) ? source_desc->buffer.length : 256);
 157                 break;
 158
 159         case ACPI_TYPE_STRING:
 160
 161                 ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[0x%.2X] \"%s\"\n",
 162                                       source_desc->string.length,
 163                                       source_desc->string.pointer));
 164                 break;
 165
 166         case ACPI_TYPE_PACKAGE:
 167
 168                 ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
 169                                       "[Contains 0x%.2X Elements]\n",
 170                                       source_desc->package.count));
 171
 172                 /* Output the entire contents of the package */
 173
 174                 for (i = 0; i < source_desc->package.count; i++) {
 175                         acpi_ex_do_debug_object(source_desc->package.
 176                                                 elements[i], level + 4, i + 1);
 177                 }
 178                 break;
 179
 180         case ACPI_TYPE_LOCAL_REFERENCE:
 181
 182                 ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[%s] ",
 183                                       acpi_ut_get_reference_name(source_desc)));
 184
 185                 /* Decode the reference */
 186
 187                 switch (source_desc->reference.class) {
 188                 case ACPI_REFCLASS_INDEX:
 189
 190                         ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "0x%X\n",
 191                                               source_desc->reference.value));
 192                         break;
 193
 194                 case ACPI_REFCLASS_TABLE:
 195
 196                         /* Case for ddb_handle */
 197
 198                         ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
 199                                               "Table Index 0x%X\n",
 200                                               source_desc->reference.value));
 201                         return;
 202
 203                 default:
 204                         break;
 205                 }
 206
 207                 ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "  "));
 208
 209                 /* Check for valid node first, then valid object */
 210
 211                 if (source_desc->reference.node) {
 212                         if (ACPI_GET_DESCRIPTOR_TYPE
 213                             (source_desc->reference.node) !=
 214                             ACPI_DESC_TYPE_NAMED) {
 215                                 ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
 216                                                       " %p - Not a valid namespace node\n",
 217                                                       source_desc->reference.
 218                                                       node));
 219                         } else {
 220                                 ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
 221                                                       "Node %p [%4.4s] ",
 222                                                       source_desc->reference.
 223                                                       node,
 224                                                       (source_desc->reference.
 225                                                        node)->name.ascii));
 226
 227                                 switch ((source_desc->reference.node)->type) {
 228
 229                                         /* These types have no attached object */
 230
 231                                 case ACPI_TYPE_DEVICE:
 232                                         acpi_os_printf("Device\n");
 233                                         break;
 234
 235                                 case ACPI_TYPE_THERMAL:
 236                                         acpi_os_printf("Thermal Zone\n");
 237                                         break;
 238
 239                                 default:
 240                                         acpi_ex_do_debug_object((source_desc->
 241                                                                  reference.
 242                                                                  node)->object,
 243                                                                 level + 4, 0);
 244                                         break;
 245                                 }
 246                         }
 247                 } else if (source_desc->reference.object) {
 248                         if (ACPI_GET_DESCRIPTOR_TYPE
 249                             (source_desc->reference.object) ==
 250                             ACPI_DESC_TYPE_NAMED) {
 251                                 acpi_ex_do_debug_object(((struct
 252                                                           acpi_namespace_node *)
 253                                                          source_desc->reference.
 254                                                          object)->object,
 255                                                         level + 4, 0);
 256                         } else {
 257                                 acpi_ex_do_debug_object(source_desc->reference.
 258                                                         object, level + 4, 0);
 259                         }
 260                 }
 261                 break;
 262
 263         default:
 264
 265                 ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "%p\n",
 266                                       source_desc));
 267                 break;
 268         }
 269
 270         ACPI_DEBUG_PRINT_RAW((ACPI_DB_EXEC, "\n"));
 271         return_VOID;
 272 }
 273
 274 /*******************************************************************************
 275  *
 276  * FUNCTION:    acpi_ex_store
 277  *
 278  * PARAMETERS:  *source_desc        - Value to be stored
 279  *              *dest_desc          - Where to store it.  Must be an NS node
 280  *                                    or a union acpi_operand_object of type
 281  *                                    Reference;
 282  *              walk_state          - Current walk state
 283  *
 284  * RETURN:      Status
 285  *
 286  * DESCRIPTION: Store the value described by source_desc into the location
 287  *              described by dest_desc. Called by various interpreter
 288  *              functions to store the result of an operation into
 289  *              the destination operand -- not just simply the actual "Store"
 290  *              ASL operator.
 291  *
 292  ******************************************************************************/
 293
 294 acpi_status
 295 acpi_ex_store(union acpi_operand_object *source_desc,
 296               union acpi_operand_object *dest_desc,
 297               struct acpi_walk_state *walk_state)
 298 {
 299         acpi_status status = AE_OK;
 300         union acpi_operand_object *ref_desc = dest_desc;
 301
 302         ACPI_FUNCTION_TRACE_PTR(ex_store, dest_desc);
 303
 304         /* Validate parameters */
 305
 306         if (!source_desc || !dest_desc) {
 307                 ACPI_ERROR((AE_INFO, "Null parameter"));
 308                 return_ACPI_STATUS(AE_AML_NO_OPERAND);
 309         }
 310
 311         /* dest_desc can be either a namespace node or an ACPI object */
 312
 313         if (ACPI_GET_DESCRIPTOR_TYPE(dest_desc) == ACPI_DESC_TYPE_NAMED) {
 314                 /*
 315                  * Dest is a namespace node,
 316                  * Storing an object into a Named node.
 317                  */
 318                 status = acpi_ex_store_object_to_node(source_desc,
 319                                                       (struct
 320                                                        acpi_namespace_node *)
 321                                                       dest_desc, walk_state,
 322                                                       ACPI_IMPLICIT_CONVERSION);
 323
 324                 return_ACPI_STATUS(status);
 325         }
 326
 327         /* Destination object must be a Reference or a Constant object */
 328
 329         switch (dest_desc->common.type) {
 330         case ACPI_TYPE_LOCAL_REFERENCE:
 331                 break;
 332
 333         case ACPI_TYPE_INTEGER:
 334
 335                 /* Allow stores to Constants -- a Noop as per ACPI spec */
 336
 337                 if (dest_desc->common.flags & AOPOBJ_AML_CONSTANT) {
 338                         return_ACPI_STATUS(AE_OK);
 339                 }
 340
 341                 /*lint -fallthrough */
 342
 343         default:
 344
 345                 /* Destination is not a Reference object */
 346
 347                 ACPI_ERROR((AE_INFO,
 348                             "Target is not a Reference or Constant object - %s [%p]",
 349                             acpi_ut_get_object_type_name(dest_desc),
 350                             dest_desc));
 351
 352                 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 353         }
 354
 355         /*
 356          * Examine the Reference class. These cases are handled:
 357          *
 358          * 1) Store to Name (Change the object associated with a name)
 359          * 2) Store to an indexed area of a Buffer or Package
 360          * 3) Store to a Method Local or Arg
 361          * 4) Store to the debug object
 362          */
 363         switch (ref_desc->reference.class) {
 364         case ACPI_REFCLASS_REFOF:
 365
 366                 /* Storing an object into a Name "container" */
 367
 368                 status = acpi_ex_store_object_to_node(source_desc,
 369                                                       ref_desc->reference.
 370                                                       object, walk_state,
 371                                                       ACPI_IMPLICIT_CONVERSION);
 372                 break;
 373
 374         case ACPI_REFCLASS_INDEX:
 375
 376                 /* Storing to an Index (pointer into a packager or buffer) */
 377
 378                 status =
 379                     acpi_ex_store_object_to_index(source_desc, ref_desc,
 380                                                   walk_state);
 381                 break;
 382
 383         case ACPI_REFCLASS_LOCAL:
 384         case ACPI_REFCLASS_ARG:
 385
 386                 /* Store to a method local/arg  */
 387
 388                 status =
 389                     acpi_ds_store_object_to_local(ref_desc->reference.class,
 390                                                   ref_desc->reference.value,
 391                                                   source_desc, walk_state);
 392                 break;
 393
 394         case ACPI_REFCLASS_DEBUG:
 395
 396                 /*
 397                  * Storing to the Debug object causes the value stored to be
 398                  * displayed and otherwise has no effect -- see ACPI Specification
 399                  */
 400                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 401                                   "**** Write to Debug Object: Object %p %s ****:\n\n",
 402                                   source_desc,
 403                                   acpi_ut_get_object_type_name(source_desc)));
 404
 405                 acpi_ex_do_debug_object(source_desc, 0, 0);
 406                 break;
 407
 408         default:
 409
 410                 ACPI_ERROR((AE_INFO, "Unknown Reference Class %2.2X",
 411                             ref_desc->reference.class));
 412                 ACPI_DUMP_ENTRY(ref_desc, ACPI_LV_INFO);
 413
 414                 status = AE_AML_INTERNAL;
 415                 break;
 416         }
 417
 418         return_ACPI_STATUS(status);
 419 }
 420
 421 /*******************************************************************************
 422  *
 423  * FUNCTION:    acpi_ex_store_object_to_index
 424  *
 425  * PARAMETERS:  *source_desc            - Value to be stored
 426  *              *dest_desc              - Named object to receive the value
 427  *              walk_state              - Current walk state
 428  *
 429  * RETURN:      Status
 430  *
 431  * DESCRIPTION: Store the object to indexed Buffer or Package element
 432  *
 433  ******************************************************************************/
 434
 435 static acpi_status
 436 acpi_ex_store_object_to_index(union acpi_operand_object *source_desc,
 437                               union acpi_operand_object *index_desc,
 438                               struct acpi_walk_state *walk_state)
 439 {
 440         acpi_status status = AE_OK;
 441         union acpi_operand_object *obj_desc;
 442         union acpi_operand_object *new_desc;
 443         u8 value = 0;
 444         u32 i;
 445
 446         ACPI_FUNCTION_TRACE(ex_store_object_to_index);
 447
 448         /*
 449          * Destination must be a reference pointer, and
 450          * must point to either a buffer or a package
 451          */
 452         switch (index_desc->reference.target_type) {
 453         case ACPI_TYPE_PACKAGE:
 454                 /*
 455                  * Storing to a package element. Copy the object and replace
 456                  * any existing object with the new object. No implicit
 457                  * conversion is performed.
 458                  *
 459                  * The object at *(index_desc->Reference.Where) is the
 460                  * element within the package that is to be modified.
 461                  * The parent package object is at index_desc->Reference.Object
 462                  */
 463                 obj_desc = *(index_desc->reference.where);
 464
 465                 if (source_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE &&
 466                     source_desc->reference.class == ACPI_REFCLASS_TABLE) {
 467
 468                         /* This is a DDBHandle, just add a reference to it */
 469
 470                         acpi_ut_add_reference(source_desc);
 471                         new_desc = source_desc;
 472                 } else {
 473                         /* Normal object, copy it */
 474
 475                         status =
 476                             acpi_ut_copy_iobject_to_iobject(source_desc,
 477                                                             &new_desc,
 478                                                             walk_state);
 479                         if (ACPI_FAILURE(status)) {
 480                                 return_ACPI_STATUS(status);
 481                         }
 482                 }
 483
 484                 if (obj_desc) {
 485
 486                         /* Decrement reference count by the ref count of the parent package */
 487
 488                         for (i = 0; i < ((union acpi_operand_object *)
 489                                          index_desc->reference.object)->common.
 490                              reference_count; i++) {
 491                                 acpi_ut_remove_reference(obj_desc);
 492                         }
 493                 }
 494
 495                 *(index_desc->reference.where) = new_desc;
 496
 497                 /* Increment ref count by the ref count of the parent package-1 */
 498
 499                 for (i = 1; i < ((union acpi_operand_object *)
 500                                  index_desc->reference.object)->common.
 501                      reference_count; i++) {
 502                         acpi_ut_add_reference(new_desc);
 503                 }
 504
 505                 break;
 506
 507         case ACPI_TYPE_BUFFER_FIELD:
 508
 509                 /*
 510                  * Store into a Buffer or String (not actually a real buffer_field)
 511                  * at a location defined by an Index.
 512                  *
 513                  * The first 8-bit element of the source object is written to the
 514                  * 8-bit Buffer location defined by the Index destination object,
 515                  * according to the ACPI 2.0 specification.
 516                  */
 517
 518                 /*
 519                  * Make sure the target is a Buffer or String. An error should
 520                  * not happen here, since the reference_object was constructed
 521                  * by the INDEX_OP code.
 522                  */
 523                 obj_desc = index_desc->reference.object;
 524                 if ((obj_desc->common.type != ACPI_TYPE_BUFFER) &&
 525                     (obj_desc->common.type != ACPI_TYPE_STRING)) {
 526                         return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 527                 }
 528
 529                 /*
 530                  * The assignment of the individual elements will be slightly
 531                  * different for each source type.
 532                  */
 533                 switch (source_desc->common.type) {
 534                 case ACPI_TYPE_INTEGER:
 535
 536                         /* Use the least-significant byte of the integer */
 537
 538                         value = (u8) (source_desc->integer.value);
 539                         break;
 540
 541                 case ACPI_TYPE_BUFFER:
 542                 case ACPI_TYPE_STRING:
 543
 544                         /* Note: Takes advantage of common string/buffer fields */
 545
 546                         value = source_desc->buffer.pointer[0];
 547                         break;
 548
 549                 default:
 550
 551                         /* All other types are invalid */
 552
 553                         ACPI_ERROR((AE_INFO,
 554                                     "Source must be Integer/Buffer/String type, not %s",
 555                                     acpi_ut_get_object_type_name(source_desc)));
 556                         return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 557                 }
 558
 559                 /* Store the source value into the target buffer byte */
 560
 561                 obj_desc->buffer.pointer[index_desc->reference.value] = value;
 562                 break;
 563
 564         default:
 565                 ACPI_ERROR((AE_INFO, "Target is not a Package or BufferField"));
 566                 status = AE_AML_OPERAND_TYPE;
 567                 break;
 568         }
 569
 570         return_ACPI_STATUS(status);
 571 }
 572
 573 /*******************************************************************************
 574  *
 575  * FUNCTION:    acpi_ex_store_object_to_node
 576  *
 577  * PARAMETERS:  source_desc             - Value to be stored
 578  *              Node                    - Named object to receive the value
 579  *              walk_state              - Current walk state
 580  *              implicit_conversion     - Perform implicit conversion (yes/no)
 581  *
 582  * RETURN:      Status
 583  *
 584  * DESCRIPTION: Store the object to the named object.
 585  *
 586  *              The Assignment of an object to a named object is handled here
 587  *              The value passed in will replace the current value (if any)
 588  *              with the input value.
 589  *
 590  *              When storing into an object the data is converted to the
 591  *              target object type then stored in the object.  This means
 592  *              that the target object type (for an initialized target) will
 593  *              not be changed by a store operation.
 594  *
 595  *              Assumes parameters are already validated.
 596  *
 597  ******************************************************************************/
 598
 599 acpi_status
 600 acpi_ex_store_object_to_node(union acpi_operand_object *source_desc,
 601                              struct acpi_namespace_node *node,
 602                              struct acpi_walk_state *walk_state,
 603                              u8 implicit_conversion)
 604 {
 605         acpi_status status = AE_OK;
 606         union acpi_operand_object *target_desc;
 607         union acpi_operand_object *new_desc;
 608         acpi_object_type target_type;
 609
 610         ACPI_FUNCTION_TRACE_PTR(ex_store_object_to_node, source_desc);
 611
 612         /* Get current type of the node, and object attached to Node */
 613
 614         target_type = acpi_ns_get_type(node);
 615         target_desc = acpi_ns_get_attached_object(node);
 616
 617         ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Storing %p(%s) into node %p(%s)\n",
 618                           source_desc,
 619                           acpi_ut_get_object_type_name(source_desc), node,
 620                           acpi_ut_get_type_name(target_type)));
 621
 622         /*
 623          * Resolve the source object to an actual value
 624          * (If it is a reference object)
 625          */
 626         status = acpi_ex_resolve_object(&source_desc, target_type, walk_state);
 627         if (ACPI_FAILURE(status)) {
 628                 return_ACPI_STATUS(status);
 629         }
 630
 631         /* If no implicit conversion, drop into the default case below */
 632
 633         if ((!implicit_conversion) ||
 634             ((walk_state->opcode == AML_COPY_OP) &&
 635              (target_type != ACPI_TYPE_LOCAL_REGION_FIELD) &&
 636              (target_type != ACPI_TYPE_LOCAL_BANK_FIELD) &&
 637              (target_type != ACPI_TYPE_LOCAL_INDEX_FIELD))) {
 638                 /*
 639                  * Force execution of default (no implicit conversion). Note:
 640                  * copy_object does not perform an implicit conversion, as per the ACPI
 641                  * spec -- except in case of region/bank/index fields -- because these
 642                  * objects must retain their original type permanently.
 643                  */
 644                 target_type = ACPI_TYPE_ANY;
 645         }
 646
 647         /* Do the actual store operation */
 648
 649         switch (target_type) {
 650         case ACPI_TYPE_BUFFER_FIELD:
 651         case ACPI_TYPE_LOCAL_REGION_FIELD:
 652         case ACPI_TYPE_LOCAL_BANK_FIELD:
 653         case ACPI_TYPE_LOCAL_INDEX_FIELD:
 654
 655                 /* For fields, copy the source data to the target field. */
 656
 657                 status = acpi_ex_write_data_to_field(source_desc, target_desc,
 658                                                      &walk_state->result_obj);
 659                 break;
 660
 661         case ACPI_TYPE_INTEGER:
 662         case ACPI_TYPE_STRING:
 663         case ACPI_TYPE_BUFFER:
 664
 665                 /*
 666                  * These target types are all of type Integer/String/Buffer, and
 667                  * therefore support implicit conversion before the store.
 668                  *
 669                  * Copy and/or convert the source object to a new target object
 670                  */
 671                 status =
 672                     acpi_ex_store_object_to_object(source_desc, target_desc,
 673                                                    &new_desc, walk_state);
 674                 if (ACPI_FAILURE(status)) {
 675                         return_ACPI_STATUS(status);
 676                 }
 677
 678                 if (new_desc != target_desc) {
 679                         /*
 680                          * Store the new new_desc as the new value of the Name, and set
 681                          * the Name's type to that of the value being stored in it.
 682                          * source_desc reference count is incremented by attach_object.
 683                          *
 684                          * Note: This may change the type of the node if an explicit store
 685                          * has been performed such that the node/object type has been
 686                          * changed.
 687                          */
 688                         status =
 689                             acpi_ns_attach_object(node, new_desc,
 690                                                   new_desc->common.type);
 691
 692                         ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 693                                           "Store %s into %s via Convert/Attach\n",
 694                                           acpi_ut_get_object_type_name
 695                                           (source_desc),
 696                                           acpi_ut_get_object_type_name
 697                                           (new_desc)));
 698                 }
 699                 break;
 700
 701         default:
 702
 703                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 704                                   "Storing %s (%p) directly into node (%p) with no implicit conversion\n",
 705                                   acpi_ut_get_object_type_name(source_desc),
 706                                   source_desc, node));
 707
 708                 /* No conversions for all other types.  Just attach the source object */
 709
 710                 status = acpi_ns_attach_object(node, source_desc,
 711                                                source_desc->common.type);
 712                 break;
 713         }
 714
 715         return_ACPI_STATUS(status);
 716 }