2 * processor_idle - idle state submodule to the ACPI processor driver
4 * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
5 * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
6 * Copyright (C) 2004, 2005 Dominik Brodowski <linux@brodo.de>
7 * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
8 * - Added processor hotplug support
9 * Copyright (C) 2005 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
10 * - Added support for C3 on SMP
12 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation; either version 2 of the License, or (at
17 * your option) any later version.
19 * This program is distributed in the hope that it will be useful, but
20 * WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
22 * General Public License for more details.
24 * You should have received a copy of the GNU General Public License along
25 * with this program; if not, write to the Free Software Foundation, Inc.,
26 * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
28 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/init.h>
34 #include <linux/cpufreq.h>
35 #include <linux/proc_fs.h>
36 #include <linux/seq_file.h>
37 #include <linux/acpi.h>
38 #include <linux/dmi.h>
39 #include <linux/moduleparam.h>
40 #include <linux/sched.h> /* need_resched() */
41 #include <linux/latency.h>
44 #include <asm/uaccess.h>
46 #include <acpi/acpi_bus.h>
47 #include <acpi/processor.h>
49 #define ACPI_PROCESSOR_COMPONENT 0x01000000
50 #define ACPI_PROCESSOR_CLASS "processor"
51 #define ACPI_PROCESSOR_DRIVER_NAME "ACPI Processor Driver"
52 #define _COMPONENT ACPI_PROCESSOR_COMPONENT
53 ACPI_MODULE_NAME("acpi_processor")
54 #define ACPI_PROCESSOR_FILE_POWER "power"
55 #define US_TO_PM_TIMER_TICKS(t) ((t * (PM_TIMER_FREQUENCY/1000)) / 1000)
56 #define C2_OVERHEAD 4 /* 1us (3.579 ticks per us) */
57 #define C3_OVERHEAD 4 /* 1us (3.579 ticks per us) */
58 static void (*pm_idle_save
) (void) __read_mostly
;
59 module_param(max_cstate
, uint
, 0644);
61 static unsigned int nocst __read_mostly
;
62 module_param(nocst
, uint
, 0000);
65 * bm_history -- bit-mask with a bit per jiffy of bus-master activity
66 * 1000 HZ: 0xFFFFFFFF: 32 jiffies = 32ms
67 * 800 HZ: 0xFFFFFFFF: 32 jiffies = 40ms
68 * 100 HZ: 0x0000000F: 4 jiffies = 40ms
69 * reduce history for more aggressive entry into C3
71 static unsigned int bm_history __read_mostly
=
72 (HZ
>= 800 ? 0xFFFFFFFF : ((1U << (HZ
/ 25)) - 1));
73 module_param(bm_history
, uint
, 0644);
74 /* --------------------------------------------------------------------------
76 -------------------------------------------------------------------------- */
79 * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
80 * For now disable this. Probably a bug somewhere else.
82 * To skip this limit, boot/load with a large max_cstate limit.
84 static int set_max_cstate(struct dmi_system_id
*id
)
86 if (max_cstate
> ACPI_PROCESSOR_MAX_POWER
)
89 printk(KERN_NOTICE PREFIX
"%s detected - limiting to C%ld max_cstate."
90 " Override with \"processor.max_cstate=%d\"\n", id
->ident
,
91 (long)id
->driver_data
, ACPI_PROCESSOR_MAX_POWER
+ 1);
93 max_cstate
= (long)id
->driver_data
;
98 /* Actually this shouldn't be __cpuinitdata, would be better to fix the
99 callers to only run once -AK */
100 static struct dmi_system_id __cpuinitdata processor_power_dmi_table
[] = {
101 { set_max_cstate
, "IBM ThinkPad R40e", {
102 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
103 DMI_MATCH(DMI_BIOS_VERSION
,"1SET70WW")}, (void *)1},
104 { set_max_cstate
, "IBM ThinkPad R40e", {
105 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
106 DMI_MATCH(DMI_BIOS_VERSION
,"1SET60WW")}, (void *)1},
107 { set_max_cstate
, "IBM ThinkPad R40e", {
108 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
109 DMI_MATCH(DMI_BIOS_VERSION
,"1SET43WW") }, (void*)1},
110 { set_max_cstate
, "IBM ThinkPad R40e", {
111 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
112 DMI_MATCH(DMI_BIOS_VERSION
,"1SET45WW") }, (void*)1},
113 { set_max_cstate
, "IBM ThinkPad R40e", {
114 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
115 DMI_MATCH(DMI_BIOS_VERSION
,"1SET47WW") }, (void*)1},
116 { set_max_cstate
, "IBM ThinkPad R40e", {
117 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
118 DMI_MATCH(DMI_BIOS_VERSION
,"1SET50WW") }, (void*)1},
119 { set_max_cstate
, "IBM ThinkPad R40e", {
120 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
121 DMI_MATCH(DMI_BIOS_VERSION
,"1SET52WW") }, (void*)1},
122 { set_max_cstate
, "IBM ThinkPad R40e", {
123 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
124 DMI_MATCH(DMI_BIOS_VERSION
,"1SET55WW") }, (void*)1},
125 { set_max_cstate
, "IBM ThinkPad R40e", {
126 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
127 DMI_MATCH(DMI_BIOS_VERSION
,"1SET56WW") }, (void*)1},
128 { set_max_cstate
, "IBM ThinkPad R40e", {
129 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
130 DMI_MATCH(DMI_BIOS_VERSION
,"1SET59WW") }, (void*)1},
131 { set_max_cstate
, "IBM ThinkPad R40e", {
132 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
133 DMI_MATCH(DMI_BIOS_VERSION
,"1SET60WW") }, (void*)1},
134 { set_max_cstate
, "IBM ThinkPad R40e", {
135 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
136 DMI_MATCH(DMI_BIOS_VERSION
,"1SET61WW") }, (void*)1},
137 { set_max_cstate
, "IBM ThinkPad R40e", {
138 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
139 DMI_MATCH(DMI_BIOS_VERSION
,"1SET62WW") }, (void*)1},
140 { set_max_cstate
, "IBM ThinkPad R40e", {
141 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
142 DMI_MATCH(DMI_BIOS_VERSION
,"1SET64WW") }, (void*)1},
143 { set_max_cstate
, "IBM ThinkPad R40e", {
144 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
145 DMI_MATCH(DMI_BIOS_VERSION
,"1SET65WW") }, (void*)1},
146 { set_max_cstate
, "IBM ThinkPad R40e", {
147 DMI_MATCH(DMI_BIOS_VENDOR
,"IBM"),
148 DMI_MATCH(DMI_BIOS_VERSION
,"1SET68WW") }, (void*)1},
149 { set_max_cstate
, "Medion 41700", {
150 DMI_MATCH(DMI_BIOS_VENDOR
,"Phoenix Technologies LTD"),
151 DMI_MATCH(DMI_BIOS_VERSION
,"R01-A1J")}, (void *)1},
152 { set_max_cstate
, "Clevo 5600D", {
153 DMI_MATCH(DMI_BIOS_VENDOR
,"Phoenix Technologies LTD"),
154 DMI_MATCH(DMI_BIOS_VERSION
,"SHE845M0.86C.0013.D.0302131307")},
159 static inline u32
ticks_elapsed(u32 t1
, u32 t2
)
163 else if (!(acpi_gbl_FADT
.flags
& ACPI_FADT_32BIT_TIMER
))
164 return (((0x00FFFFFF - t1
) + t2
) & 0x00FFFFFF);
166 return ((0xFFFFFFFF - t1
) + t2
);
170 acpi_processor_power_activate(struct acpi_processor
*pr
,
171 struct acpi_processor_cx
*new)
173 struct acpi_processor_cx
*old
;
178 old
= pr
->power
.state
;
181 old
->promotion
.count
= 0;
182 new->demotion
.count
= 0;
184 /* Cleanup from old state. */
188 /* Disable bus master reload */
189 if (new->type
!= ACPI_STATE_C3
&& pr
->flags
.bm_check
)
190 acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD
, 0);
195 /* Prepare to use new state. */
198 /* Enable bus master reload */
199 if (old
->type
!= ACPI_STATE_C3
&& pr
->flags
.bm_check
)
200 acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD
, 1);
204 pr
->power
.state
= new;
209 static void acpi_safe_halt(void)
211 current_thread_info()->status
&= ~TS_POLLING
;
213 * TS_POLLING-cleared state must be visible before we
219 current_thread_info()->status
|= TS_POLLING
;
222 static atomic_t c3_cpu_count
;
224 /* Common C-state entry for C2, C3, .. */
225 static void acpi_cstate_enter(struct acpi_processor_cx
*cstate
)
227 if (cstate
->space_id
== ACPI_CSTATE_FFH
) {
228 /* Call into architectural FFH based C-state */
229 acpi_processor_ffh_cstate_enter(cstate
);
232 /* IO port based C-state */
233 inb(cstate
->address
);
234 /* Dummy wait op - must do something useless after P_LVL2 read
235 because chipsets cannot guarantee that STPCLK# signal
236 gets asserted in time to freeze execution properly. */
237 unused
= inl(acpi_gbl_FADT
.xpm_timer_block
.address
);
241 static void acpi_processor_idle(void)
243 struct acpi_processor
*pr
= NULL
;
244 struct acpi_processor_cx
*cx
= NULL
;
245 struct acpi_processor_cx
*next_state
= NULL
;
249 pr
= processors
[smp_processor_id()];
254 * Interrupts must be disabled during bus mastering calculations and
255 * for C2/C3 transitions.
260 * Check whether we truly need to go idle, or should
263 if (unlikely(need_resched())) {
268 cx
= pr
->power
.state
;
280 * Check for bus mastering activity (if required), record, and check
283 if (pr
->flags
.bm_check
) {
285 unsigned long diff
= jiffies
- pr
->power
.bm_check_timestamp
;
290 pr
->power
.bm_activity
<<= diff
;
292 acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS
, &bm_status
);
294 pr
->power
.bm_activity
|= 0x1;
295 acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS
, 1);
298 * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
299 * the true state of bus mastering activity; forcing us to
300 * manually check the BMIDEA bit of each IDE channel.
302 else if (errata
.piix4
.bmisx
) {
303 if ((inb_p(errata
.piix4
.bmisx
+ 0x02) & 0x01)
304 || (inb_p(errata
.piix4
.bmisx
+ 0x0A) & 0x01))
305 pr
->power
.bm_activity
|= 0x1;
308 pr
->power
.bm_check_timestamp
= jiffies
;
311 * If bus mastering is or was active this jiffy, demote
312 * to avoid a faulty transition. Note that the processor
313 * won't enter a low-power state during this call (to this
314 * function) but should upon the next.
316 * TBD: A better policy might be to fallback to the demotion
317 * state (use it for this quantum only) istead of
318 * demoting -- and rely on duration as our sole demotion
319 * qualification. This may, however, introduce DMA
320 * issues (e.g. floppy DMA transfer overrun/underrun).
322 if ((pr
->power
.bm_activity
& 0x1) &&
323 cx
->demotion
.threshold
.bm
) {
325 next_state
= cx
->demotion
.state
;
330 #ifdef CONFIG_HOTPLUG_CPU
332 * Check for P_LVL2_UP flag before entering C2 and above on
333 * an SMP system. We do it here instead of doing it at _CST/P_LVL
334 * detection phase, to work cleanly with logical CPU hotplug.
336 if ((cx
->type
!= ACPI_STATE_C1
) && (num_online_cpus() > 1) &&
337 !pr
->flags
.has_cst
&& !(acpi_gbl_FADT
.flags
& ACPI_FADT_C2_MP_SUPPORTED
))
338 cx
= &pr
->power
.states
[ACPI_STATE_C1
];
344 * Invoke the current Cx state to put the processor to sleep.
346 if (cx
->type
== ACPI_STATE_C2
|| cx
->type
== ACPI_STATE_C3
) {
347 current_thread_info()->status
&= ~TS_POLLING
;
349 * TS_POLLING-cleared state must be visible before we
353 if (need_resched()) {
354 current_thread_info()->status
|= TS_POLLING
;
365 * Use the appropriate idle routine, the one that would
366 * be used without acpi C-states.
374 * TBD: Can't get time duration while in C1, as resumes
375 * go to an ISR rather than here. Need to instrument
376 * base interrupt handler.
378 sleep_ticks
= 0xFFFFFFFF;
382 /* Get start time (ticks) */
383 t1
= inl(acpi_gbl_FADT
.xpm_timer_block
.address
);
385 acpi_cstate_enter(cx
);
386 /* Get end time (ticks) */
387 t2
= inl(acpi_gbl_FADT
.xpm_timer_block
.address
);
389 #ifdef CONFIG_GENERIC_TIME
390 /* TSC halts in C2, so notify users */
393 /* Re-enable interrupts */
395 current_thread_info()->status
|= TS_POLLING
;
396 /* Compute time (ticks) that we were actually asleep */
398 ticks_elapsed(t1
, t2
) - cx
->latency_ticks
- C2_OVERHEAD
;
403 if (pr
->flags
.bm_check
) {
404 if (atomic_inc_return(&c3_cpu_count
) ==
407 * All CPUs are trying to go to C3
408 * Disable bus master arbitration
410 acpi_set_register(ACPI_BITREG_ARB_DISABLE
, 1);
413 /* SMP with no shared cache... Invalidate cache */
414 ACPI_FLUSH_CPU_CACHE();
417 /* Get start time (ticks) */
418 t1
= inl(acpi_gbl_FADT
.xpm_timer_block
.address
);
420 acpi_cstate_enter(cx
);
421 /* Get end time (ticks) */
422 t2
= inl(acpi_gbl_FADT
.xpm_timer_block
.address
);
423 if (pr
->flags
.bm_check
) {
424 /* Enable bus master arbitration */
425 atomic_dec(&c3_cpu_count
);
426 acpi_set_register(ACPI_BITREG_ARB_DISABLE
, 0);
429 #ifdef CONFIG_GENERIC_TIME
430 /* TSC halts in C3, so notify users */
433 /* Re-enable interrupts */
435 current_thread_info()->status
|= TS_POLLING
;
436 /* Compute time (ticks) that we were actually asleep */
438 ticks_elapsed(t1
, t2
) - cx
->latency_ticks
- C3_OVERHEAD
;
446 if ((cx
->type
!= ACPI_STATE_C1
) && (sleep_ticks
> 0))
447 cx
->time
+= sleep_ticks
;
449 next_state
= pr
->power
.state
;
451 #ifdef CONFIG_HOTPLUG_CPU
452 /* Don't do promotion/demotion */
453 if ((cx
->type
== ACPI_STATE_C1
) && (num_online_cpus() > 1) &&
454 !pr
->flags
.has_cst
&& !(acpi_gbl_FADT
.flags
& ACPI_FADT_C2_MP_SUPPORTED
)) {
463 * Track the number of longs (time asleep is greater than threshold)
464 * and promote when the count threshold is reached. Note that bus
465 * mastering activity may prevent promotions.
466 * Do not promote above max_cstate.
468 if (cx
->promotion
.state
&&
469 ((cx
->promotion
.state
- pr
->power
.states
) <= max_cstate
)) {
470 if (sleep_ticks
> cx
->promotion
.threshold
.ticks
&&
471 cx
->promotion
.state
->latency
<= system_latency_constraint()) {
472 cx
->promotion
.count
++;
473 cx
->demotion
.count
= 0;
474 if (cx
->promotion
.count
>=
475 cx
->promotion
.threshold
.count
) {
476 if (pr
->flags
.bm_check
) {
478 (pr
->power
.bm_activity
& cx
->
479 promotion
.threshold
.bm
)) {
485 next_state
= cx
->promotion
.state
;
495 * Track the number of shorts (time asleep is less than time threshold)
496 * and demote when the usage threshold is reached.
498 if (cx
->demotion
.state
) {
499 if (sleep_ticks
< cx
->demotion
.threshold
.ticks
) {
500 cx
->demotion
.count
++;
501 cx
->promotion
.count
= 0;
502 if (cx
->demotion
.count
>= cx
->demotion
.threshold
.count
) {
503 next_state
= cx
->demotion
.state
;
511 * Demote if current state exceeds max_cstate
512 * or if the latency of the current state is unacceptable
514 if ((pr
->power
.state
- pr
->power
.states
) > max_cstate
||
515 pr
->power
.state
->latency
> system_latency_constraint()) {
516 if (cx
->demotion
.state
)
517 next_state
= cx
->demotion
.state
;
523 * If we're going to start using a new Cx state we must clean up
524 * from the previous and prepare to use the new.
526 if (next_state
!= pr
->power
.state
)
527 acpi_processor_power_activate(pr
, next_state
);
530 static int acpi_processor_set_power_policy(struct acpi_processor
*pr
)
533 unsigned int state_is_set
= 0;
534 struct acpi_processor_cx
*lower
= NULL
;
535 struct acpi_processor_cx
*higher
= NULL
;
536 struct acpi_processor_cx
*cx
;
543 * This function sets the default Cx state policy (OS idle handler).
544 * Our scheme is to promote quickly to C2 but more conservatively
545 * to C3. We're favoring C2 for its characteristics of low latency
546 * (quick response), good power savings, and ability to allow bus
547 * mastering activity. Note that the Cx state policy is completely
548 * customizable and can be altered dynamically.
552 for (i
= 1; i
< ACPI_PROCESSOR_MAX_POWER
; i
++) {
553 cx
= &pr
->power
.states
[i
];
558 pr
->power
.state
= cx
;
567 for (i
= 1; i
< ACPI_PROCESSOR_MAX_POWER
; i
++) {
568 cx
= &pr
->power
.states
[i
];
573 cx
->demotion
.state
= lower
;
574 cx
->demotion
.threshold
.ticks
= cx
->latency_ticks
;
575 cx
->demotion
.threshold
.count
= 1;
576 if (cx
->type
== ACPI_STATE_C3
)
577 cx
->demotion
.threshold
.bm
= bm_history
;
584 for (i
= (ACPI_PROCESSOR_MAX_POWER
- 1); i
> 0; i
--) {
585 cx
= &pr
->power
.states
[i
];
590 cx
->promotion
.state
= higher
;
591 cx
->promotion
.threshold
.ticks
= cx
->latency_ticks
;
592 if (cx
->type
>= ACPI_STATE_C2
)
593 cx
->promotion
.threshold
.count
= 4;
595 cx
->promotion
.threshold
.count
= 10;
596 if (higher
->type
== ACPI_STATE_C3
)
597 cx
->promotion
.threshold
.bm
= bm_history
;
606 static int acpi_processor_get_power_info_fadt(struct acpi_processor
*pr
)
615 /* if info is obtained from pblk/fadt, type equals state */
616 pr
->power
.states
[ACPI_STATE_C2
].type
= ACPI_STATE_C2
;
617 pr
->power
.states
[ACPI_STATE_C3
].type
= ACPI_STATE_C3
;
619 #ifndef CONFIG_HOTPLUG_CPU
621 * Check for P_LVL2_UP flag before entering C2 and above on
624 if ((num_online_cpus() > 1) &&
625 !(acpi_gbl_FADT
.flags
& ACPI_FADT_C2_MP_SUPPORTED
))
629 /* determine C2 and C3 address from pblk */
630 pr
->power
.states
[ACPI_STATE_C2
].address
= pr
->pblk
+ 4;
631 pr
->power
.states
[ACPI_STATE_C3
].address
= pr
->pblk
+ 5;
633 /* determine latencies from FADT */
634 pr
->power
.states
[ACPI_STATE_C2
].latency
= acpi_gbl_FADT
.C2latency
;
635 pr
->power
.states
[ACPI_STATE_C3
].latency
= acpi_gbl_FADT
.C3latency
;
637 ACPI_DEBUG_PRINT((ACPI_DB_INFO
,
638 "lvl2[0x%08x] lvl3[0x%08x]\n",
639 pr
->power
.states
[ACPI_STATE_C2
].address
,
640 pr
->power
.states
[ACPI_STATE_C3
].address
));
645 static int acpi_processor_get_power_info_default(struct acpi_processor
*pr
)
647 if (!pr
->power
.states
[ACPI_STATE_C1
].valid
) {
648 /* set the first C-State to C1 */
649 /* all processors need to support C1 */
650 pr
->power
.states
[ACPI_STATE_C1
].type
= ACPI_STATE_C1
;
651 pr
->power
.states
[ACPI_STATE_C1
].valid
= 1;
653 /* the C0 state only exists as a filler in our array */
654 pr
->power
.states
[ACPI_STATE_C0
].valid
= 1;
658 static int acpi_processor_get_power_info_cst(struct acpi_processor
*pr
)
660 acpi_status status
= 0;
664 struct acpi_buffer buffer
= { ACPI_ALLOCATE_BUFFER
, NULL
};
665 union acpi_object
*cst
;
673 status
= acpi_evaluate_object(pr
->handle
, "_CST", NULL
, &buffer
);
674 if (ACPI_FAILURE(status
)) {
675 ACPI_DEBUG_PRINT((ACPI_DB_INFO
, "No _CST, giving up\n"));
679 cst
= buffer
.pointer
;
681 /* There must be at least 2 elements */
682 if (!cst
|| (cst
->type
!= ACPI_TYPE_PACKAGE
) || cst
->package
.count
< 2) {
683 printk(KERN_ERR PREFIX
"not enough elements in _CST\n");
688 count
= cst
->package
.elements
[0].integer
.value
;
690 /* Validate number of power states. */
691 if (count
< 1 || count
!= cst
->package
.count
- 1) {
692 printk(KERN_ERR PREFIX
"count given by _CST is not valid\n");
697 /* Tell driver that at least _CST is supported. */
698 pr
->flags
.has_cst
= 1;
700 for (i
= 1; i
<= count
; i
++) {
701 union acpi_object
*element
;
702 union acpi_object
*obj
;
703 struct acpi_power_register
*reg
;
704 struct acpi_processor_cx cx
;
706 memset(&cx
, 0, sizeof(cx
));
708 element
= &(cst
->package
.elements
[i
]);
709 if (element
->type
!= ACPI_TYPE_PACKAGE
)
712 if (element
->package
.count
!= 4)
715 obj
= &(element
->package
.elements
[0]);
717 if (obj
->type
!= ACPI_TYPE_BUFFER
)
720 reg
= (struct acpi_power_register
*)obj
->buffer
.pointer
;
722 if (reg
->space_id
!= ACPI_ADR_SPACE_SYSTEM_IO
&&
723 (reg
->space_id
!= ACPI_ADR_SPACE_FIXED_HARDWARE
))
726 /* There should be an easy way to extract an integer... */
727 obj
= &(element
->package
.elements
[1]);
728 if (obj
->type
!= ACPI_TYPE_INTEGER
)
731 cx
.type
= obj
->integer
.value
;
733 * Some buggy BIOSes won't list C1 in _CST -
734 * Let acpi_processor_get_power_info_default() handle them later
736 if (i
== 1 && cx
.type
!= ACPI_STATE_C1
)
739 cx
.address
= reg
->address
;
740 cx
.index
= current_count
+ 1;
742 cx
.space_id
= ACPI_CSTATE_SYSTEMIO
;
743 if (reg
->space_id
== ACPI_ADR_SPACE_FIXED_HARDWARE
) {
744 if (acpi_processor_ffh_cstate_probe
745 (pr
->id
, &cx
, reg
) == 0) {
746 cx
.space_id
= ACPI_CSTATE_FFH
;
747 } else if (cx
.type
!= ACPI_STATE_C1
) {
749 * C1 is a special case where FIXED_HARDWARE
750 * can be handled in non-MWAIT way as well.
751 * In that case, save this _CST entry info.
752 * That is, we retain space_id of SYSTEM_IO for
754 * Otherwise, ignore this info and continue.
760 obj
= &(element
->package
.elements
[2]);
761 if (obj
->type
!= ACPI_TYPE_INTEGER
)
764 cx
.latency
= obj
->integer
.value
;
766 obj
= &(element
->package
.elements
[3]);
767 if (obj
->type
!= ACPI_TYPE_INTEGER
)
770 cx
.power
= obj
->integer
.value
;
773 memcpy(&(pr
->power
.states
[current_count
]), &cx
, sizeof(cx
));
776 * We support total ACPI_PROCESSOR_MAX_POWER - 1
777 * (From 1 through ACPI_PROCESSOR_MAX_POWER - 1)
779 if (current_count
>= (ACPI_PROCESSOR_MAX_POWER
- 1)) {
781 "Limiting number of power states to max (%d)\n",
782 ACPI_PROCESSOR_MAX_POWER
);
784 "Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n");
789 ACPI_DEBUG_PRINT((ACPI_DB_INFO
, "Found %d power states\n",
792 /* Validate number of power states discovered */
793 if (current_count
< 2)
797 kfree(buffer
.pointer
);
802 static void acpi_processor_power_verify_c2(struct acpi_processor_cx
*cx
)
809 * C2 latency must be less than or equal to 100
812 else if (cx
->latency
> ACPI_PROCESSOR_MAX_C2_LATENCY
) {
813 ACPI_DEBUG_PRINT((ACPI_DB_INFO
,
814 "latency too large [%d]\n", cx
->latency
));
819 * Otherwise we've met all of our C2 requirements.
820 * Normalize the C2 latency to expidite policy
823 cx
->latency_ticks
= US_TO_PM_TIMER_TICKS(cx
->latency
);
828 static void acpi_processor_power_verify_c3(struct acpi_processor
*pr
,
829 struct acpi_processor_cx
*cx
)
831 static int bm_check_flag
;
838 * C3 latency must be less than or equal to 1000
841 else if (cx
->latency
> ACPI_PROCESSOR_MAX_C3_LATENCY
) {
842 ACPI_DEBUG_PRINT((ACPI_DB_INFO
,
843 "latency too large [%d]\n", cx
->latency
));
848 * PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
849 * DMA transfers are used by any ISA device to avoid livelock.
850 * Note that we could disable Type-F DMA (as recommended by
851 * the erratum), but this is known to disrupt certain ISA
852 * devices thus we take the conservative approach.
854 else if (errata
.piix4
.fdma
) {
855 ACPI_DEBUG_PRINT((ACPI_DB_INFO
,
856 "C3 not supported on PIIX4 with Type-F DMA\n"));
860 /* All the logic here assumes flags.bm_check is same across all CPUs */
861 if (!bm_check_flag
) {
862 /* Determine whether bm_check is needed based on CPU */
863 acpi_processor_power_init_bm_check(&(pr
->flags
), pr
->id
);
864 bm_check_flag
= pr
->flags
.bm_check
;
866 pr
->flags
.bm_check
= bm_check_flag
;
869 if (pr
->flags
.bm_check
) {
870 /* bus mastering control is necessary */
871 if (!pr
->flags
.bm_control
) {
872 ACPI_DEBUG_PRINT((ACPI_DB_INFO
,
873 "C3 support requires bus mastering control\n"));
878 * WBINVD should be set in fadt, for C3 state to be
879 * supported on when bm_check is not required.
881 if (!(acpi_gbl_FADT
.flags
& ACPI_FADT_WBINVD
)) {
882 ACPI_DEBUG_PRINT((ACPI_DB_INFO
,
883 "Cache invalidation should work properly"
884 " for C3 to be enabled on SMP systems\n"));
887 acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD
, 0);
891 * Otherwise we've met all of our C3 requirements.
892 * Normalize the C3 latency to expidite policy. Enable
893 * checking of bus mastering status (bm_check) so we can
894 * use this in our C3 policy
897 cx
->latency_ticks
= US_TO_PM_TIMER_TICKS(cx
->latency
);
902 static int acpi_processor_power_verify(struct acpi_processor
*pr
)
905 unsigned int working
= 0;
907 #ifdef ARCH_APICTIMER_STOPS_ON_C3
908 int timer_broadcast
= 0;
909 cpumask_t mask
= cpumask_of_cpu(pr
->id
);
910 on_each_cpu(switch_ipi_to_APIC_timer
, &mask
, 1, 1);
913 for (i
= 1; i
< ACPI_PROCESSOR_MAX_POWER
; i
++) {
914 struct acpi_processor_cx
*cx
= &pr
->power
.states
[i
];
922 acpi_processor_power_verify_c2(cx
);
923 #ifdef ARCH_APICTIMER_STOPS_ON_C3
924 /* Some AMD systems fake C3 as C2, but still
925 have timer troubles */
927 boot_cpu_data
.x86_vendor
== X86_VENDOR_AMD
)
933 acpi_processor_power_verify_c3(pr
, cx
);
934 #ifdef ARCH_APICTIMER_STOPS_ON_C3
945 #ifdef ARCH_APICTIMER_STOPS_ON_C3
947 on_each_cpu(switch_APIC_timer_to_ipi
, &mask
, 1, 1);
953 static int acpi_processor_get_power_info(struct acpi_processor
*pr
)
959 /* NOTE: the idle thread may not be running while calling
962 /* Zero initialize all the C-states info. */
963 memset(pr
->power
.states
, 0, sizeof(pr
->power
.states
));
965 result
= acpi_processor_get_power_info_cst(pr
);
966 if (result
== -ENODEV
)
967 result
= acpi_processor_get_power_info_fadt(pr
);
972 acpi_processor_get_power_info_default(pr
);
974 pr
->power
.count
= acpi_processor_power_verify(pr
);
979 * Now that we know which states are supported, set the default
980 * policy. Note that this policy can be changed dynamically
981 * (e.g. encourage deeper sleeps to conserve battery life when
984 result
= acpi_processor_set_power_policy(pr
);
989 * if one state of type C2 or C3 is available, mark this
990 * CPU as being "idle manageable"
992 for (i
= 1; i
< ACPI_PROCESSOR_MAX_POWER
; i
++) {
993 if (pr
->power
.states
[i
].valid
) {
995 if (pr
->power
.states
[i
].type
>= ACPI_STATE_C2
)
1003 int acpi_processor_cst_has_changed(struct acpi_processor
*pr
)
1015 if (!pr
->flags
.power_setup_done
)
1018 /* Fall back to the default idle loop */
1019 pm_idle
= pm_idle_save
;
1020 synchronize_sched(); /* Relies on interrupts forcing exit from idle. */
1022 pr
->flags
.power
= 0;
1023 result
= acpi_processor_get_power_info(pr
);
1024 if ((pr
->flags
.power
== 1) && (pr
->flags
.power_setup_done
))
1025 pm_idle
= acpi_processor_idle
;
1030 /* proc interface */
1032 static int acpi_processor_power_seq_show(struct seq_file
*seq
, void *offset
)
1034 struct acpi_processor
*pr
= seq
->private;
1041 seq_printf(seq
, "active state: C%zd\n"
1043 "bus master activity: %08x\n"
1044 "maximum allowed latency: %d usec\n",
1045 pr
->power
.state
? pr
->power
.state
- pr
->power
.states
: 0,
1046 max_cstate
, (unsigned)pr
->power
.bm_activity
,
1047 system_latency_constraint());
1049 seq_puts(seq
, "states:\n");
1051 for (i
= 1; i
<= pr
->power
.count
; i
++) {
1052 seq_printf(seq
, " %cC%d: ",
1053 (&pr
->power
.states
[i
] ==
1054 pr
->power
.state
? '*' : ' '), i
);
1056 if (!pr
->power
.states
[i
].valid
) {
1057 seq_puts(seq
, "<not supported>\n");
1061 switch (pr
->power
.states
[i
].type
) {
1063 seq_printf(seq
, "type[C1] ");
1066 seq_printf(seq
, "type[C2] ");
1069 seq_printf(seq
, "type[C3] ");
1072 seq_printf(seq
, "type[--] ");
1076 if (pr
->power
.states
[i
].promotion
.state
)
1077 seq_printf(seq
, "promotion[C%zd] ",
1078 (pr
->power
.states
[i
].promotion
.state
-
1081 seq_puts(seq
, "promotion[--] ");
1083 if (pr
->power
.states
[i
].demotion
.state
)
1084 seq_printf(seq
, "demotion[C%zd] ",
1085 (pr
->power
.states
[i
].demotion
.state
-
1088 seq_puts(seq
, "demotion[--] ");
1090 seq_printf(seq
, "latency[%03d] usage[%08d] duration[%020llu]\n",
1091 pr
->power
.states
[i
].latency
,
1092 pr
->power
.states
[i
].usage
,
1093 pr
->power
.states
[i
].time
);
1100 static int acpi_processor_power_open_fs(struct inode
*inode
, struct file
*file
)
1102 return single_open(file
, acpi_processor_power_seq_show
,
1106 static const struct file_operations acpi_processor_power_fops
= {
1107 .open
= acpi_processor_power_open_fs
,
1109 .llseek
= seq_lseek
,
1110 .release
= single_release
,
1114 static void smp_callback(void *v
)
1116 /* we already woke the CPU up, nothing more to do */
1120 * This function gets called when a part of the kernel has a new latency
1121 * requirement. This means we need to get all processors out of their C-state,
1122 * and then recalculate a new suitable C-state. Just do a cross-cpu IPI; that
1123 * wakes them all right up.
1125 static int acpi_processor_latency_notify(struct notifier_block
*b
,
1126 unsigned long l
, void *v
)
1128 smp_call_function(smp_callback
, NULL
, 0, 1);
1132 static struct notifier_block acpi_processor_latency_notifier
= {
1133 .notifier_call
= acpi_processor_latency_notify
,
1137 int __cpuinit
acpi_processor_power_init(struct acpi_processor
*pr
,
1138 struct acpi_device
*device
)
1140 acpi_status status
= 0;
1141 static int first_run
;
1142 struct proc_dir_entry
*entry
= NULL
;
1147 dmi_check_system(processor_power_dmi_table
);
1148 if (max_cstate
< ACPI_C_STATES_MAX
)
1150 "ACPI: processor limited to max C-state %d\n",
1154 register_latency_notifier(&acpi_processor_latency_notifier
);
1161 if (acpi_gbl_FADT
.cst_control
&& !nocst
) {
1163 acpi_os_write_port(acpi_gbl_FADT
.smi_command
, acpi_gbl_FADT
.cst_control
, 8);
1164 if (ACPI_FAILURE(status
)) {
1165 ACPI_EXCEPTION((AE_INFO
, status
,
1166 "Notifying BIOS of _CST ability failed"));
1170 acpi_processor_get_power_info(pr
);
1173 * Install the idle handler if processor power management is supported.
1174 * Note that we use previously set idle handler will be used on
1175 * platforms that only support C1.
1177 if ((pr
->flags
.power
) && (!boot_option_idle_override
)) {
1178 printk(KERN_INFO PREFIX
"CPU%d (power states:", pr
->id
);
1179 for (i
= 1; i
<= pr
->power
.count
; i
++)
1180 if (pr
->power
.states
[i
].valid
)
1181 printk(" C%d[C%d]", i
,
1182 pr
->power
.states
[i
].type
);
1186 pm_idle_save
= pm_idle
;
1187 pm_idle
= acpi_processor_idle
;
1192 entry
= create_proc_entry(ACPI_PROCESSOR_FILE_POWER
,
1193 S_IRUGO
, acpi_device_dir(device
));
1197 entry
->proc_fops
= &acpi_processor_power_fops
;
1198 entry
->data
= acpi_driver_data(device
);
1199 entry
->owner
= THIS_MODULE
;
1202 pr
->flags
.power_setup_done
= 1;
1207 int acpi_processor_power_exit(struct acpi_processor
*pr
,
1208 struct acpi_device
*device
)
1211 pr
->flags
.power_setup_done
= 0;
1213 if (acpi_device_dir(device
))
1214 remove_proc_entry(ACPI_PROCESSOR_FILE_POWER
,
1215 acpi_device_dir(device
));
1217 /* Unregister the idle handler when processor #0 is removed. */
1219 pm_idle
= pm_idle_save
;
1222 * We are about to unload the current idle thread pm callback
1223 * (pm_idle), Wait for all processors to update cached/local
1224 * copies of pm_idle before proceeding.
1228 unregister_latency_notifier(&acpi_processor_latency_notifier
);