[deliverable/linux.git] / drivers / acpi / processor_idle.c

/*
 * processor_idle - idle state submodule to the ACPI processor driver
 *
 *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
 *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
 *  Copyright (C) 2004, 2005 Dominik Brodowski <linux@brodo.de>
 *  Copyright (C) 2004  Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
 *                      - Added processor hotplug support
 *  Copyright (C) 2005  Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
 *                      - Added support for C3 on SMP
 *
 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or (at
 *  your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful, but
 *  WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *  General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
 *
 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <linux/moduleparam.h>
#include <linux/sched.h>        /* need_resched() */
#include <linux/pm_qos_params.h>
#include <linux/clockchips.h>
#include <linux/cpuidle.h>
#include <linux/irqflags.h>

/*
 * Include the apic definitions for x86 to have the APIC timer related defines
 * available also for UP (on SMP it gets magically included via linux/smp.h).
 * asm/acpi.h is not an option, as it would require more include magic. Also
 * creating an empty asm-ia64/apic.h would just trade pest vs. cholera.
 */
#ifdef CONFIG_X86
#include <asm/apic.h>
#endif

#include <asm/io.h>
#include <asm/uaccess.h>

#include <acpi/acpi_bus.h>
#include <acpi/processor.h>
#include <asm/processor.h>

#define ACPI_PROCESSOR_CLASS            "processor"
#define _COMPONENT              ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_idle");
#define ACPI_PROCESSOR_FILE_POWER       "power"
#define PM_TIMER_TICK_NS                (1000000000ULL/PM_TIMER_FREQUENCY)
#define C2_OVERHEAD                     1       /* 1us */
#define C3_OVERHEAD                     1       /* 1us */
#define PM_TIMER_TICKS_TO_US(p)         (((p) * 1000)/(PM_TIMER_FREQUENCY/1000))

static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
module_param(max_cstate, uint, 0000);
static unsigned int nocst __read_mostly;
module_param(nocst, uint, 0000);

static unsigned int latency_factor __read_mostly = 2;
module_param(latency_factor, uint, 0644);

static s64 us_to_pm_timer_ticks(s64 t)
{
        return div64_u64(t * PM_TIMER_FREQUENCY, 1000000);
}
/*
 * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3.
 * For now disable this. Probably a bug somewhere else.
 *
 * To skip this limit, boot/load with a large max_cstate limit.
 */
static int set_max_cstate(const struct dmi_system_id *id)
{
        if (max_cstate > ACPI_PROCESSOR_MAX_POWER)
                return 0;

        printk(KERN_NOTICE PREFIX "%s detected - limiting to C%ld max_cstate."
               " Override with \"processor.max_cstate=%d\"\n", id->ident,
               (long)id->driver_data, ACPI_PROCESSOR_MAX_POWER + 1);

        max_cstate = (long)id->driver_data;

        return 0;
}

/* Actually this shouldn't be __cpuinitdata, would be better to fix the
   callers to only run once -AK */
static struct dmi_system_id __cpuinitdata processor_power_dmi_table[] = {
        { set_max_cstate, "Clevo 5600D", {
          DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
          DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")},
         (void *)2},
        {},
};


/*
 * Callers should disable interrupts before the call and enable
 * interrupts after return.
 */
static void acpi_safe_halt(void)
{
        current_thread_info()->status &= ~TS_POLLING;
        /*
         * TS_POLLING-cleared state must be visible before we
         * test NEED_RESCHED:
         */
        smp_mb();
        if (!need_resched()) {
                safe_halt();
                local_irq_disable();
        }
        current_thread_info()->status |= TS_POLLING;
}

#ifdef ARCH_APICTIMER_STOPS_ON_C3

/*
 * Some BIOS implementations switch to C3 in the published C2 state.
 * This seems to be a common problem on AMD boxen, but other vendors
 * are affected too. We pick the most conservative approach: we assume
 * that the local APIC stops in both C2 and C3.
 */
static void lapic_timer_check_state(int state, struct acpi_processor *pr,
                                   struct acpi_processor_cx *cx)
{
        struct acpi_processor_power *pwr = &pr->power;
        u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2;

        if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
                return;

        if (boot_cpu_has(X86_FEATURE_AMDC1E))
                type = ACPI_STATE_C1;

        /*
         * Check, if one of the previous states already marked the lapic
         * unstable
         */
        if (pwr->timer_broadcast_on_state < state)
                return;

        if (cx->type >= type)
                pr->power.timer_broadcast_on_state = state;
}

static void lapic_timer_propagate_broadcast(void *arg)
{
        struct acpi_processor *pr = (struct acpi_processor *) arg;
        unsigned long reason;

        reason = pr->power.timer_broadcast_on_state < INT_MAX ?
                CLOCK_EVT_NOTIFY_BROADCAST_ON : CLOCK_EVT_NOTIFY_BROADCAST_OFF;

        clockevents_notify(reason, &pr->id);
}

/* Power(C) State timer broadcast control */
static void lapic_timer_state_broadcast(struct acpi_processor *pr,
                                       struct acpi_processor_cx *cx,
                                       int broadcast)
{
        int state = cx - pr->power.states;

        if (state >= pr->power.timer_broadcast_on_state) {
                unsigned long reason;

                reason = broadcast ?  CLOCK_EVT_NOTIFY_BROADCAST_ENTER :
                        CLOCK_EVT_NOTIFY_BROADCAST_EXIT;
                clockevents_notify(reason, &pr->id);
        }
}

#else

static void lapic_timer_check_state(int state, struct acpi_processor *pr,
                                   struct acpi_processor_cx *cstate) { }
static void lapic_timer_propagate_broadcast(struct acpi_processor *pr) { }
static void lapic_timer_state_broadcast(struct acpi_processor *pr,
                                       struct acpi_processor_cx *cx,
                                       int broadcast)
{
}

#endif

/*
 * Suspend / resume control
 */
static int acpi_idle_suspend;
static u32 saved_bm_rld;

static void acpi_idle_bm_rld_save(void)
{
        acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
}
static void acpi_idle_bm_rld_restore(void)
{
        u32 resumed_bm_rld;

        acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);

        if (resumed_bm_rld != saved_bm_rld)
                acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
}

int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
{
        if (acpi_idle_suspend == 1)
                return 0;

        acpi_idle_bm_rld_save();
        acpi_idle_suspend = 1;
        return 0;
}

int acpi_processor_resume(struct acpi_device * device)
{
        if (acpi_idle_suspend == 0)
                return 0;

        acpi_idle_bm_rld_restore();
        acpi_idle_suspend = 0;
        return 0;
}

#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
static void tsc_check_state(int state)
{
        switch (boot_cpu_data.x86_vendor) {
        case X86_VENDOR_AMD:
        case X86_VENDOR_INTEL:
                /*
                 * AMD Fam10h TSC will tick in all
                 * C/P/S0/S1 states when this bit is set.
                 */
                if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
                        return;

                /*FALL THROUGH*/
        default:
                /* TSC could halt in idle, so notify users */
                if (state > ACPI_STATE_C1)
                        mark_tsc_unstable("TSC halts in idle");
        }
}
#else
static void tsc_check_state(int state) { return; }
#endif

static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
{

        if (!pr)
                return -EINVAL;

        if (!pr->pblk)
                return -ENODEV;

        /* if info is obtained from pblk/fadt, type equals state */
        pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2;
        pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3;

#ifndef CONFIG_HOTPLUG_CPU
        /*
         * Check for P_LVL2_UP flag before entering C2 and above on
         * an SMP system.
         */
        if ((num_online_cpus() > 1) &&
            !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
                return -ENODEV;
#endif

        /* determine C2 and C3 address from pblk */
        pr->power.states[ACPI_STATE_C2].address = pr->pblk + 4;
        pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5;

        /* determine latencies from FADT */
        pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency;
        pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency;

        ACPI_DEBUG_PRINT((ACPI_DB_INFO,
                          "lvl2[0x%08x] lvl3[0x%08x]\n",
                          pr->power.states[ACPI_STATE_C2].address,
                          pr->power.states[ACPI_STATE_C3].address));

        return 0;
}

static int acpi_processor_get_power_info_default(struct acpi_processor *pr)
{
        if (!pr->power.states[ACPI_STATE_C1].valid) {
                /* set the first C-State to C1 */
                /* all processors need to support C1 */
                pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
                pr->power.states[ACPI_STATE_C1].valid = 1;
                pr->power.states[ACPI_STATE_C1].entry_method = ACPI_CSTATE_HALT;
        }
        /* the C0 state only exists as a filler in our array */
        pr->power.states[ACPI_STATE_C0].valid = 1;
        return 0;
}

static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
{
        acpi_status status = 0;
        acpi_integer count;
        int current_count;
        int i;
        struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
        union acpi_object *cst;


        if (nocst)
                return -ENODEV;

        current_count = 0;

        status = acpi_evaluate_object(pr->handle, "_CST", NULL, &buffer);
        if (ACPI_FAILURE(status)) {
                ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No _CST, giving up\n"));
                return -ENODEV;
        }

        cst = buffer.pointer;

        /* There must be at least 2 elements */
        if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) {
                printk(KERN_ERR PREFIX "not enough elements in _CST\n");
                status = -EFAULT;
                goto end;
        }

        count = cst->package.elements[0].integer.value;

        /* Validate number of power states. */
        if (count < 1 || count != cst->package.count - 1) {
                printk(KERN_ERR PREFIX "count given by _CST is not valid\n");
                status = -EFAULT;
                goto end;
        }

        /* Tell driver that at least _CST is supported. */
        pr->flags.has_cst = 1;

        for (i = 1; i <= count; i++) {
                union acpi_object *element;
                union acpi_object *obj;
                struct acpi_power_register *reg;
                struct acpi_processor_cx cx;

                memset(&cx, 0, sizeof(cx));

                element = &(cst->package.elements[i]);
                if (element->type != ACPI_TYPE_PACKAGE)
                        continue;

                if (element->package.count != 4)
                        continue;

                obj = &(element->package.elements[0]);

                if (obj->type != ACPI_TYPE_BUFFER)
                        continue;

                reg = (struct acpi_power_register *)obj->buffer.pointer;

                if (reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO &&
                    (reg->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE))
                        continue;

                /* There should be an easy way to extract an integer... */
                obj = &(element->package.elements[1]);
                if (obj->type != ACPI_TYPE_INTEGER)
                        continue;

                cx.type = obj->integer.value;
                /*
                 * Some buggy BIOSes won't list C1 in _CST -
                 * Let acpi_processor_get_power_info_default() handle them later
                 */
                if (i == 1 && cx.type != ACPI_STATE_C1)
                        current_count++;

                cx.address = reg->address;
                cx.index = current_count + 1;

                cx.entry_method = ACPI_CSTATE_SYSTEMIO;
                if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) {
                        if (acpi_processor_ffh_cstate_probe
                                        (pr->id, &cx, reg) == 0) {
                                cx.entry_method = ACPI_CSTATE_FFH;
                        } else if (cx.type == ACPI_STATE_C1) {
                                /*
                                 * C1 is a special case where FIXED_HARDWARE
                                 * can be handled in non-MWAIT way as well.
                                 * In that case, save this _CST entry info.
                                 * Otherwise, ignore this info and continue.
                                 */
                                cx.entry_method = ACPI_CSTATE_HALT;
                                snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT");
                        } else {
                                continue;
                        }
                        if (cx.type == ACPI_STATE_C1 &&
                                        (idle_halt || idle_nomwait)) {
                                /*
                                 * In most cases the C1 space_id obtained from
                                 * _CST object is FIXED_HARDWARE access mode.
                                 * But when the option of idle=halt is added,
                                 * the entry_method type should be changed from
                                 * CSTATE_FFH to CSTATE_HALT.
                                 * When the option of idle=nomwait is added,
                                 * the C1 entry_method type should be
                                 * CSTATE_HALT.
                                 */
                                cx.entry_method = ACPI_CSTATE_HALT;
                                snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT");
                        }
                } else {
                        snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI IOPORT 0x%x",
                                 cx.address);
                }

                if (cx.type == ACPI_STATE_C1) {
                        cx.valid = 1;
                }

                obj = &(element->package.elements[2]);
                if (obj->type != ACPI_TYPE_INTEGER)
                        continue;

                cx.latency = obj->integer.value;

                obj = &(element->package.elements[3]);
                if (obj->type != ACPI_TYPE_INTEGER)
                        continue;

                cx.power = obj->integer.value;

                current_count++;
                memcpy(&(pr->power.states[current_count]), &cx, sizeof(cx));

                /*
                 * We support total ACPI_PROCESSOR_MAX_POWER - 1
                 * (From 1 through ACPI_PROCESSOR_MAX_POWER - 1)
                 */
                if (current_count >= (ACPI_PROCESSOR_MAX_POWER - 1)) {
                        printk(KERN_WARNING
                               "Limiting number of power states to max (%d)\n",
                               ACPI_PROCESSOR_MAX_POWER);
                        printk(KERN_WARNING
                               "Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n");
                        break;
                }
        }

        ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d power states\n",
                          current_count));

        /* Validate number of power states discovered */
        if (current_count < 2)
                status = -EFAULT;

      end:
        kfree(buffer.pointer);

        return status;
}

static void acpi_processor_power_verify_c2(struct acpi_processor_cx *cx)
{

        if (!cx->address)
                return;

        /*
         * C2 latency must be less than or equal to 100
         * microseconds.
         */
        else if (cx->latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
                                  "latency too large [%d]\n", cx->latency));
                return;
        }

        /*
         * Otherwise we've met all of our C2 requirements.
         * Normalize the C2 latency to expidite policy
         */
        cx->valid = 1;

        cx->latency_ticks = cx->latency;

        return;
}

static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
                                           struct acpi_processor_cx *cx)
{
        static int bm_check_flag = -1;
        static int bm_control_flag = -1;


        if (!cx->address)
                return;

        /*
         * C3 latency must be less than or equal to 1000
         * microseconds.
         */
        else if (cx->latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
                                  "latency too large [%d]\n", cx->latency));
                return;
        }

        /*
         * PIIX4 Erratum #18: We don't support C3 when Type-F (fast)
         * DMA transfers are used by any ISA device to avoid livelock.
         * Note that we could disable Type-F DMA (as recommended by
         * the erratum), but this is known to disrupt certain ISA
         * devices thus we take the conservative approach.
         */
        else if (errata.piix4.fdma) {
                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
                                  "C3 not supported on PIIX4 with Type-F DMA\n"));
                return;
        }

        /* All the logic here assumes flags.bm_check is same across all CPUs */
        if (bm_check_flag == -1) {
                /* Determine whether bm_check is needed based on CPU  */
                acpi_processor_power_init_bm_check(&(pr->flags), pr->id);
                bm_check_flag = pr->flags.bm_check;
                bm_control_flag = pr->flags.bm_control;
        } else {
                pr->flags.bm_check = bm_check_flag;
                pr->flags.bm_control = bm_control_flag;
        }

        if (pr->flags.bm_check) {
                if (!pr->flags.bm_control) {
                        if (pr->flags.has_cst != 1) {
                                /* bus mastering control is necessary */
                                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
                                        "C3 support requires BM control\n"));
                                return;
                        } else {
                                /* Here we enter C3 without bus mastering */
                                ACPI_DEBUG_PRINT((ACPI_DB_INFO,
                                        "C3 support without BM control\n"));
                        }
                }
        } else {
                /*
                 * WBINVD should be set in fadt, for C3 state to be
                 * supported on when bm_check is not required.
                 */
                if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) {
                        ACPI_DEBUG_PRINT((ACPI_DB_INFO,
                                          "Cache invalidation should work properly"
                                          " for C3 to be enabled on SMP systems\n"));
                        return;
                }
        }

        /*
         * Otherwise we've met all of our C3 requirements.
         * Normalize the C3 latency to expidite policy.  Enable
         * checking of bus mastering status (bm_check) so we can
         * use this in our C3 policy
         */
        cx->valid = 1;

        cx->latency_ticks = cx->latency;
        /*
         * On older chipsets, BM_RLD needs to be set
         * in order for Bus Master activity to wake the
         * system from C3.  Newer chipsets handle DMA
         * during C3 automatically and BM_RLD is a NOP.
         * In either case, the proper way to
         * handle BM_RLD is to set it and leave it set.
         */
        acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, 1);

        return;
}

static int acpi_processor_power_verify(struct acpi_processor *pr)
{
        unsigned int i;
        unsigned int working = 0;

        pr->power.timer_broadcast_on_state = INT_MAX;

        for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
                struct acpi_processor_cx *cx = &pr->power.states[i];

                switch (cx->type) {
                case ACPI_STATE_C1:
                        cx->valid = 1;
                        break;

                case ACPI_STATE_C2:
                        acpi_processor_power_verify_c2(cx);
                        break;

                case ACPI_STATE_C3:
                        acpi_processor_power_verify_c3(pr, cx);
                        break;
                }
                if (!cx->valid)
                        continue;

                lapic_timer_check_state(i, pr, cx);
                tsc_check_state(cx->type);
                working++;
        }

        smp_call_function_single(pr->id, lapic_timer_propagate_broadcast,
                                 pr, 1);

        return (working);
}

static int acpi_processor_get_power_info(struct acpi_processor *pr)
{
        unsigned int i;
        int result;


        /* NOTE: the idle thread may not be running while calling
         * this function */

        /* Zero initialize all the C-states info. */
        memset(pr->power.states, 0, sizeof(pr->power.states));

        result = acpi_processor_get_power_info_cst(pr);
        if (result == -ENODEV)
                result = acpi_processor_get_power_info_fadt(pr);

        if (result)
                return result;

        acpi_processor_get_power_info_default(pr);

        pr->power.count = acpi_processor_power_verify(pr);

        /*
         * if one state of type C2 or C3 is available, mark this
         * CPU as being "idle manageable"
         */
        for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
                if (pr->power.states[i].valid) {
                        pr->power.count = i;
                        if (pr->power.states[i].type >= ACPI_STATE_C2)
                                pr->flags.power = 1;
                }
        }

        return 0;
}

static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset)
{
        struct acpi_processor *pr = seq->private;
        unsigned int i;


        if (!pr)
                goto end;

        seq_printf(seq, "active state:            C%zd\n"
                   "max_cstate:              C%d\n"
                   "maximum allowed latency: %d usec\n",
                   pr->power.state ? pr->power.state - pr->power.states : 0,
                   max_cstate, pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));

        seq_puts(seq, "states:\n");

        for (i = 1; i <= pr->power.count; i++) {
                seq_printf(seq, "   %cC%d:                  ",
                           (&pr->power.states[i] ==
                            pr->power.state ? '*' : ' '), i);

                if (!pr->power.states[i].valid) {
                        seq_puts(seq, "<not supported>\n");
                        continue;
                }

                switch (pr->power.states[i].type) {
                case ACPI_STATE_C1:
                        seq_printf(seq, "type[C1] ");
                        break;
                case ACPI_STATE_C2:
                        seq_printf(seq, "type[C2] ");
                        break;
                case ACPI_STATE_C3:
                        seq_printf(seq, "type[C3] ");
                        break;
                default:
                        seq_printf(seq, "type[--] ");
                        break;
                }

                if (pr->power.states[i].promotion.state)
                        seq_printf(seq, "promotion[C%zd] ",
                                   (pr->power.states[i].promotion.state -
                                    pr->power.states));
                else
                        seq_puts(seq, "promotion[--] ");

                if (pr->power.states[i].demotion.state)
                        seq_printf(seq, "demotion[C%zd] ",
                                   (pr->power.states[i].demotion.state -
                                    pr->power.states));
                else
                        seq_puts(seq, "demotion[--] ");

                seq_printf(seq, "latency[%03d] usage[%08d] duration[%020llu]\n",
                           pr->power.states[i].latency,
                           pr->power.states[i].usage,
                           (unsigned long long)pr->power.states[i].time);
        }

      end:
        return 0;
}

static int acpi_processor_power_open_fs(struct inode *inode, struct file *file)
{
        return single_open(file, acpi_processor_power_seq_show,
                           PDE(inode)->data);
}

static const struct file_operations acpi_processor_power_fops = {
        .owner = THIS_MODULE,
        .open = acpi_processor_power_open_fs,
        .read = seq_read,
        .llseek = seq_lseek,
        .release = single_release,
};


/**
 * acpi_idle_bm_check - checks if bus master activity was detected
 */
static int acpi_idle_bm_check(void)
{
        u32 bm_status = 0;

        acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
        if (bm_status)
                acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
        /*
         * PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
         * the true state of bus mastering activity; forcing us to
         * manually check the BMIDEA bit of each IDE channel.
         */
        else if (errata.piix4.bmisx) {
                if ((inb_p(errata.piix4.bmisx + 0x02) & 0x01)
                    || (inb_p(errata.piix4.bmisx + 0x0A) & 0x01))
                        bm_status = 1;
        }
        return bm_status;
}

/**
 * acpi_idle_do_entry - a helper function that does C2 and C3 type entry
 * @cx: cstate data
 *
 * Caller disables interrupt before call and enables interrupt after return.
 */
static inline void acpi_idle_do_entry(struct acpi_processor_cx *cx)
{
        /* Don't trace irqs off for idle */
        stop_critical_timings();
        if (cx->entry_method == ACPI_CSTATE_FFH) {
                /* Call into architectural FFH based C-state */
                acpi_processor_ffh_cstate_enter(cx);
        } else if (cx->entry_method == ACPI_CSTATE_HALT) {
                acpi_safe_halt();
        } else {
                int unused;
                /* IO port based C-state */
                inb(cx->address);
                /* Dummy wait op - must do something useless after P_LVL2 read
                   because chipsets cannot guarantee that STPCLK# signal
                   gets asserted in time to freeze execution properly. */
                unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
        }
        start_critical_timings();
}

/**
 * acpi_idle_enter_c1 - enters an ACPI C1 state-type
 * @dev: the target CPU
 * @state: the state data
 *
 * This is equivalent to the HALT instruction.
 */
static int acpi_idle_enter_c1(struct cpuidle_device *dev,
                              struct cpuidle_state *state)
{
        ktime_t  kt1, kt2;
        s64 idle_time;
        struct acpi_processor *pr;
        struct acpi_processor_cx *cx = cpuidle_get_statedata(state);

        pr = __get_cpu_var(processors);

        if (unlikely(!pr))
                return 0;

        local_irq_disable();

        /* Do not access any ACPI IO ports in suspend path */
        if (acpi_idle_suspend) {
                local_irq_enable();
                cpu_relax();
                return 0;
        }

        lapic_timer_state_broadcast(pr, cx, 1);
        kt1 = ktime_get_real();
        acpi_idle_do_entry(cx);
        kt2 = ktime_get_real();
        idle_time =  ktime_to_us(ktime_sub(kt2, kt1));

        local_irq_enable();
        cx->usage++;
        lapic_timer_state_broadcast(pr, cx, 0);

        return idle_time;
}

/**
 * acpi_idle_enter_simple - enters an ACPI state without BM handling
 * @dev: the target CPU
 * @state: the state data
 */
static int acpi_idle_enter_simple(struct cpuidle_device *dev,
                                  struct cpuidle_state *state)
{
        struct acpi_processor *pr;
        struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
        ktime_t  kt1, kt2;
        s64 idle_time;
        s64 sleep_ticks = 0;

        pr = __get_cpu_var(processors);

        if (unlikely(!pr))
                return 0;

        if (acpi_idle_suspend)
                return(acpi_idle_enter_c1(dev, state));

        local_irq_disable();
        current_thread_info()->status &= ~TS_POLLING;
        /*
         * TS_POLLING-cleared state must be visible before we test
         * NEED_RESCHED:
         */
        smp_mb();

        if (unlikely(need_resched())) {
                current_thread_info()->status |= TS_POLLING;
                local_irq_enable();
                return 0;
        }

        /*
         * Must be done before busmaster disable as we might need to
         * access HPET !
         */
        lapic_timer_state_broadcast(pr, cx, 1);

        if (cx->type == ACPI_STATE_C3)
                ACPI_FLUSH_CPU_CACHE();

        kt1 = ktime_get_real();
        /* Tell the scheduler that we are going deep-idle: */
        sched_clock_idle_sleep_event();
        acpi_idle_do_entry(cx);
        kt2 = ktime_get_real();
        idle_time =  ktime_to_us(ktime_sub(kt2, kt1));

        sleep_ticks = us_to_pm_timer_ticks(idle_time);

        /* Tell the scheduler how much we idled: */
        sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);

        local_irq_enable();
        current_thread_info()->status |= TS_POLLING;

        cx->usage++;

        lapic_timer_state_broadcast(pr, cx, 0);
        cx->time += sleep_ticks;
        return idle_time;
}

static int c3_cpu_count;
static DEFINE_SPINLOCK(c3_lock);

/**
 * acpi_idle_enter_bm - enters C3 with proper BM handling
 * @dev: the target CPU
 * @state: the state data
 *
 * If BM is detected, the deepest non-C3 idle state is entered instead.
 */
static int acpi_idle_enter_bm(struct cpuidle_device *dev,
                              struct cpuidle_state *state)
{
        struct acpi_processor *pr;
        struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
        ktime_t  kt1, kt2;
        s64 idle_time;
        s64 sleep_ticks = 0;


        pr = __get_cpu_var(processors);

        if (unlikely(!pr))
                return 0;

        if (acpi_idle_suspend)
                return(acpi_idle_enter_c1(dev, state));

        if (acpi_idle_bm_check()) {
                if (dev->safe_state) {
                        dev->last_state = dev->safe_state;
                        return dev->safe_state->enter(dev, dev->safe_state);
                } else {
                        local_irq_disable();
                        acpi_safe_halt();
                        local_irq_enable();
                        return 0;
                }
        }

        local_irq_disable();
        current_thread_info()->status &= ~TS_POLLING;
        /*
         * TS_POLLING-cleared state must be visible before we test
         * NEED_RESCHED:
         */
        smp_mb();

        if (unlikely(need_resched())) {
                current_thread_info()->status |= TS_POLLING;
                local_irq_enable();
                return 0;
        }

        acpi_unlazy_tlb(smp_processor_id());

        /* Tell the scheduler that we are going deep-idle: */
        sched_clock_idle_sleep_event();
        /*
         * Must be done before busmaster disable as we might need to
         * access HPET !
         */
        lapic_timer_state_broadcast(pr, cx, 1);

        kt1 = ktime_get_real();
        /*
         * disable bus master
         * bm_check implies we need ARB_DIS
         * !bm_check implies we need cache flush
         * bm_control implies whether we can do ARB_DIS
         *
         * That leaves a case where bm_check is set and bm_control is
         * not set. In that case we cannot do much, we enter C3
         * without doing anything.
         */
        if (pr->flags.bm_check && pr->flags.bm_control) {
                spin_lock(&c3_lock);
                c3_cpu_count++;
                /* Disable bus master arbitration when all CPUs are in C3 */
                if (c3_cpu_count == num_online_cpus())
                        acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
                spin_unlock(&c3_lock);
        } else if (!pr->flags.bm_check) {
                ACPI_FLUSH_CPU_CACHE();
        }

        acpi_idle_do_entry(cx);

        /* Re-enable bus master arbitration */
        if (pr->flags.bm_check && pr->flags.bm_control) {
                spin_lock(&c3_lock);
                acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
                c3_cpu_count--;
                spin_unlock(&c3_lock);
        }
        kt2 = ktime_get_real();
        idle_time =  ktime_to_us(ktime_sub(kt2, kt1));

        sleep_ticks = us_to_pm_timer_ticks(idle_time);
        /* Tell the scheduler how much we idled: */
        sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);

        local_irq_enable();
        current_thread_info()->status |= TS_POLLING;

        cx->usage++;

        lapic_timer_state_broadcast(pr, cx, 0);
        cx->time += sleep_ticks;
        return idle_time;
}

struct cpuidle_driver acpi_idle_driver = {
        .name =         "acpi_idle",
        .owner =        THIS_MODULE,
};

/**
 * acpi_processor_setup_cpuidle - prepares and configures CPUIDLE
 * @pr: the ACPI processor
 */
static int acpi_processor_setup_cpuidle(struct acpi_processor *pr)
{
        int i, count = CPUIDLE_DRIVER_STATE_START;
        struct acpi_processor_cx *cx;
        struct cpuidle_state *state;
        struct cpuidle_device *dev = &pr->power.dev;

        if (!pr->flags.power_setup_done)
                return -EINVAL;

        if (pr->flags.power == 0) {
                return -EINVAL;
        }

        dev->cpu = pr->id;
        for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
                dev->states[i].name[0] = '\0';
                dev->states[i].desc[0] = '\0';
        }

        if (max_cstate == 0)
                max_cstate = 1;

        for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
                cx = &pr->power.states[i];
                state = &dev->states[count];

                if (!cx->valid)
                        continue;

#ifdef CONFIG_HOTPLUG_CPU
                if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
                    !pr->flags.has_cst &&
                    !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
                        continue;
#endif
                cpuidle_set_statedata(state, cx);

                snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
                strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
                state->exit_latency = cx->latency;
                state->target_residency = cx->latency * latency_factor;
                state->power_usage = cx->power;

                state->flags = 0;
                switch (cx->type) {
                        case ACPI_STATE_C1:
                        state->flags |= CPUIDLE_FLAG_SHALLOW;
                        if (cx->entry_method == ACPI_CSTATE_FFH)
                                state->flags |= CPUIDLE_FLAG_TIME_VALID;

                        state->enter = acpi_idle_enter_c1;
                        dev->safe_state = state;
                        break;

                        case ACPI_STATE_C2:
                        state->flags |= CPUIDLE_FLAG_BALANCED;
                        state->flags |= CPUIDLE_FLAG_TIME_VALID;
                        state->enter = acpi_idle_enter_simple;
                        dev->safe_state = state;
                        break;

                        case ACPI_STATE_C3:
                        state->flags |= CPUIDLE_FLAG_DEEP;
                        state->flags |= CPUIDLE_FLAG_TIME_VALID;
                        state->flags |= CPUIDLE_FLAG_CHECK_BM;
                        state->enter = pr->flags.bm_check ?
                                        acpi_idle_enter_bm :
                                        acpi_idle_enter_simple;
                        break;
                }

                count++;
                if (count == CPUIDLE_STATE_MAX)
                        break;
        }

        dev->state_count = count;

        if (!count)
                return -EINVAL;

        return 0;
}

int acpi_processor_cst_has_changed(struct acpi_processor *pr)
{
        int ret = 0;

        if (boot_option_idle_override)
                return 0;

        if (!pr)
                return -EINVAL;

        if (nocst) {
                return -ENODEV;
        }

        if (!pr->flags.power_setup_done)
                return -ENODEV;

        cpuidle_pause_and_lock();
        cpuidle_disable_device(&pr->power.dev);
        acpi_processor_get_power_info(pr);
        if (pr->flags.power) {
                acpi_processor_setup_cpuidle(pr);
                ret = cpuidle_enable_device(&pr->power.dev);
        }
        cpuidle_resume_and_unlock();

        return ret;
}

int __cpuinit acpi_processor_power_init(struct acpi_processor *pr,
                              struct acpi_device *device)
{
        acpi_status status = 0;
        static int first_run;
        struct proc_dir_entry *entry = NULL;
        unsigned int i;

        if (boot_option_idle_override)
                return 0;

        if (!first_run) {
                if (idle_halt) {
                        /*
                         * When the boot option of "idle=halt" is added, halt
                         * is used for CPU IDLE.
                         * In such case C2/C3 is meaningless. So the max_cstate
                         * is set to one.
                         */
                        max_cstate = 1;
                }
                dmi_check_system(processor_power_dmi_table);
                max_cstate = acpi_processor_cstate_check(max_cstate);
                if (max_cstate < ACPI_C_STATES_MAX)
                        printk(KERN_NOTICE
                               "ACPI: processor limited to max C-state %d\n",
                               max_cstate);
                first_run++;
        }

        if (!pr)
                return -EINVAL;

        if (acpi_gbl_FADT.cst_control && !nocst) {
                status =
                    acpi_os_write_port(acpi_gbl_FADT.smi_command, acpi_gbl_FADT.cst_control, 8);
                if (ACPI_FAILURE(status)) {
                        ACPI_EXCEPTION((AE_INFO, status,
                                        "Notifying BIOS of _CST ability failed"));
                }
        }

        acpi_processor_get_power_info(pr);
        pr->flags.power_setup_done = 1;

        /*
         * Install the idle handler if processor power management is supported.
         * Note that we use previously set idle handler will be used on
         * platforms that only support C1.
         */
        if (pr->flags.power) {
                acpi_processor_setup_cpuidle(pr);
                if (cpuidle_register_device(&pr->power.dev))
                        return -EIO;

                printk(KERN_INFO PREFIX "CPU%d (power states:", pr->id);
                for (i = 1; i <= pr->power.count; i++)
                        if (pr->power.states[i].valid)
                                printk(" C%d[C%d]", i,
                                       pr->power.states[i].type);
                printk(")\n");
        }

        /* 'power' [R] */
        entry = proc_create_data(ACPI_PROCESSOR_FILE_POWER,
                                 S_IRUGO, acpi_device_dir(device),
                                 &acpi_processor_power_fops,
                                 acpi_driver_data(device));
        if (!entry)
                return -EIO;
        return 0;
}

int acpi_processor_power_exit(struct acpi_processor *pr,
                              struct acpi_device *device)
{
        if (boot_option_idle_override)
                return 0;

        cpuidle_unregister_device(&pr->power.dev);
        pr->flags.power_setup_done = 0;

        if (acpi_device_dir(device))
                remove_proc_entry(ACPI_PROCESSOR_FILE_POWER,
                                  acpi_device_dir(device));

        return 0;
}