drivers/acpi/sleep.c

   1 /*
   2  * sleep.c - ACPI sleep support.
   3  *
   4  * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
   5  * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
   6  * Copyright (c) 2000-2003 Patrick Mochel
   7  * Copyright (c) 2003 Open Source Development Lab
   8  *
   9  * This file is released under the GPLv2.
  10  *
  11  */
  12
  13 #include <linux/delay.h>
  14 #include <linux/irq.h>
  15 #include <linux/dmi.h>
  16 #include <linux/device.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/suspend.h>
  19 #include <linux/reboot.h>
  20 #include <linux/acpi.h>
  21 #include <linux/module.h>
  22 #include <asm/io.h>
  23 #include <trace/events/power.h>
  24
  25 #include "internal.h"
  26 #include "sleep.h"
  27
  28 static u8 sleep_states[ACPI_S_STATE_COUNT];
  29
  30 static void acpi_sleep_tts_switch(u32 acpi_state)
  31 {
  32         acpi_status status;
  33
  34         status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state);
  35         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
  36                 /*
  37                  * OS can't evaluate the _TTS object correctly. Some warning
  38                  * message will be printed. But it won't break anything.
  39                  */
  40                 printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
  41         }
  42 }
  43
  44 static int tts_notify_reboot(struct notifier_block *this,
  45                         unsigned long code, void *x)
  46 {
  47         acpi_sleep_tts_switch(ACPI_STATE_S5);
  48         return NOTIFY_DONE;
  49 }
  50
  51 static struct notifier_block tts_notifier = {
  52         .notifier_call  = tts_notify_reboot,
  53         .next           = NULL,
  54         .priority       = 0,
  55 };
  56
  57 static int acpi_sleep_prepare(u32 acpi_state)
  58 {
  59 #ifdef CONFIG_ACPI_SLEEP
  60         /* do we have a wakeup address for S2 and S3? */
  61         if (acpi_state == ACPI_STATE_S3) {
  62                 if (!acpi_wakeup_address)
  63                         return -EFAULT;
  64                 acpi_set_firmware_waking_vector(acpi_wakeup_address);
  65
  66         }
  67         ACPI_FLUSH_CPU_CACHE();
  68 #endif
  69         printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
  70                 acpi_state);
  71         acpi_enable_wakeup_devices(acpi_state);
  72         acpi_enter_sleep_state_prep(acpi_state);
  73         return 0;
  74 }
  75
  76 static bool acpi_sleep_state_supported(u8 sleep_state)
  77 {
  78         acpi_status status;
  79         u8 type_a, type_b;
  80
  81         status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b);
  82         return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware
  83                 || (acpi_gbl_FADT.sleep_control.address
  84                         && acpi_gbl_FADT.sleep_status.address));
  85 }
  86
  87 #ifdef CONFIG_ACPI_SLEEP
  88 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
  89
  90 u32 acpi_target_system_state(void)
  91 {
  92         return acpi_target_sleep_state;
  93 }
  94 EXPORT_SYMBOL_GPL(acpi_target_system_state);
  95
  96 static bool pwr_btn_event_pending;
  97
  98 /*
  99  * The ACPI specification wants us to save NVS memory regions during hibernation
 100  * and to restore them during the subsequent resume.  Windows does that also for
 101  * suspend to RAM.  However, it is known that this mechanism does not work on
 102  * all machines, so we allow the user to disable it with the help of the
 103  * 'acpi_sleep=nonvs' kernel command line option.
 104  */
 105 static bool nvs_nosave;
 106
 107 void __init acpi_nvs_nosave(void)
 108 {
 109         nvs_nosave = true;
 110 }
 111
 112 /*
 113  * The ACPI specification wants us to save NVS memory regions during hibernation
 114  * but says nothing about saving NVS during S3.  Not all versions of Windows
 115  * save NVS on S3 suspend either, and it is clear that not all systems need
 116  * NVS to be saved at S3 time.  To improve suspend/resume time, allow the
 117  * user to disable saving NVS on S3 if their system does not require it, but
 118  * continue to save/restore NVS for S4 as specified.
 119  */
 120 static bool nvs_nosave_s3;
 121
 122 void __init acpi_nvs_nosave_s3(void)
 123 {
 124         nvs_nosave_s3 = true;
 125 }
 126
 127 /*
 128  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
 129  * user to request that behavior by using the 'acpi_old_suspend_ordering'
 130  * kernel command line option that causes the following variable to be set.
 131  */
 132 static bool old_suspend_ordering;
 133
 134 void __init acpi_old_suspend_ordering(void)
 135 {
 136         old_suspend_ordering = true;
 137 }
 138
 139 static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
 140 {
 141         acpi_old_suspend_ordering();
 142         return 0;
 143 }
 144
 145 static int __init init_nvs_nosave(const struct dmi_system_id *d)
 146 {
 147         acpi_nvs_nosave();
 148         return 0;
 149 }
 150
 151 static struct dmi_system_id acpisleep_dmi_table[] __initdata = {
 152         {
 153         .callback = init_old_suspend_ordering,
 154         .ident = "Abit KN9 (nForce4 variant)",
 155         .matches = {
 156                 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
 157                 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
 158                 },
 159         },
 160         {
 161         .callback = init_old_suspend_ordering,
 162         .ident = "HP xw4600 Workstation",
 163         .matches = {
 164                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 165                 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
 166                 },
 167         },
 168         {
 169         .callback = init_old_suspend_ordering,
 170         .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
 171         .matches = {
 172                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
 173                 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
 174                 },
 175         },
 176         {
 177         .callback = init_old_suspend_ordering,
 178         .ident = "Panasonic CF51-2L",
 179         .matches = {
 180                 DMI_MATCH(DMI_BOARD_VENDOR,
 181                                 "Matsushita Electric Industrial Co.,Ltd."),
 182                 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
 183                 },
 184         },
 185         {
 186         .callback = init_nvs_nosave,
 187         .ident = "Sony Vaio VGN-FW41E_H",
 188         .matches = {
 189                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 190                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
 191                 },
 192         },
 193         {
 194         .callback = init_nvs_nosave,
 195         .ident = "Sony Vaio VGN-FW21E",
 196         .matches = {
 197                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 198                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
 199                 },
 200         },
 201         {
 202         .callback = init_nvs_nosave,
 203         .ident = "Sony Vaio VGN-FW21M",
 204         .matches = {
 205                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 206                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
 207                 },
 208         },
 209         {
 210         .callback = init_nvs_nosave,
 211         .ident = "Sony Vaio VPCEB17FX",
 212         .matches = {
 213                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 214                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
 215                 },
 216         },
 217         {
 218         .callback = init_nvs_nosave,
 219         .ident = "Sony Vaio VGN-SR11M",
 220         .matches = {
 221                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 222                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
 223                 },
 224         },
 225         {
 226         .callback = init_nvs_nosave,
 227         .ident = "Everex StepNote Series",
 228         .matches = {
 229                 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
 230                 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
 231                 },
 232         },
 233         {
 234         .callback = init_nvs_nosave,
 235         .ident = "Sony Vaio VPCEB1Z1E",
 236         .matches = {
 237                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 238                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
 239                 },
 240         },
 241         {
 242         .callback = init_nvs_nosave,
 243         .ident = "Sony Vaio VGN-NW130D",
 244         .matches = {
 245                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 246                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
 247                 },
 248         },
 249         {
 250         .callback = init_nvs_nosave,
 251         .ident = "Sony Vaio VPCCW29FX",
 252         .matches = {
 253                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 254                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
 255                 },
 256         },
 257         {
 258         .callback = init_nvs_nosave,
 259         .ident = "Averatec AV1020-ED2",
 260         .matches = {
 261                 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
 262                 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
 263                 },
 264         },
 265         {
 266         .callback = init_old_suspend_ordering,
 267         .ident = "Asus A8N-SLI DELUXE",
 268         .matches = {
 269                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 270                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
 271                 },
 272         },
 273         {
 274         .callback = init_old_suspend_ordering,
 275         .ident = "Asus A8N-SLI Premium",
 276         .matches = {
 277                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 278                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
 279                 },
 280         },
 281         {
 282         .callback = init_nvs_nosave,
 283         .ident = "Sony Vaio VGN-SR26GN_P",
 284         .matches = {
 285                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 286                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
 287                 },
 288         },
 289         {
 290         .callback = init_nvs_nosave,
 291         .ident = "Sony Vaio VPCEB1S1E",
 292         .matches = {
 293                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 294                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
 295                 },
 296         },
 297         {
 298         .callback = init_nvs_nosave,
 299         .ident = "Sony Vaio VGN-FW520F",
 300         .matches = {
 301                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 302                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
 303                 },
 304         },
 305         {
 306         .callback = init_nvs_nosave,
 307         .ident = "Asus K54C",
 308         .matches = {
 309                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 310                 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
 311                 },
 312         },
 313         {
 314         .callback = init_nvs_nosave,
 315         .ident = "Asus K54HR",
 316         .matches = {
 317                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 318                 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
 319                 },
 320         },
 321         {},
 322 };
 323
 324 static void acpi_sleep_dmi_check(void)
 325 {
 326         int year;
 327
 328         if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year >= 2012)
 329                 acpi_nvs_nosave_s3();
 330
 331         dmi_check_system(acpisleep_dmi_table);
 332 }
 333
 334 /**
 335  * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
 336  */
 337 static int acpi_pm_freeze(void)
 338 {
 339         acpi_disable_all_gpes();
 340         acpi_os_wait_events_complete();
 341         acpi_ec_block_transactions();
 342         return 0;
 343 }
 344
 345 /**
 346  * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
 347  */
 348 static int acpi_pm_pre_suspend(void)
 349 {
 350         acpi_pm_freeze();
 351         return suspend_nvs_save();
 352 }
 353
 354 /**
 355  *      __acpi_pm_prepare - Prepare the platform to enter the target state.
 356  *
 357  *      If necessary, set the firmware waking vector and do arch-specific
 358  *      nastiness to get the wakeup code to the waking vector.
 359  */
 360 static int __acpi_pm_prepare(void)
 361 {
 362         int error = acpi_sleep_prepare(acpi_target_sleep_state);
 363         if (error)
 364                 acpi_target_sleep_state = ACPI_STATE_S0;
 365
 366         return error;
 367 }
 368
 369 /**
 370  *      acpi_pm_prepare - Prepare the platform to enter the target sleep
 371  *              state and disable the GPEs.
 372  */
 373 static int acpi_pm_prepare(void)
 374 {
 375         int error = __acpi_pm_prepare();
 376         if (!error)
 377                 error = acpi_pm_pre_suspend();
 378
 379         return error;
 380 }
 381
 382 static int find_powerf_dev(struct device *dev, void *data)
 383 {
 384         struct acpi_device *device = to_acpi_device(dev);
 385         const char *hid = acpi_device_hid(device);
 386
 387         return !strcmp(hid, ACPI_BUTTON_HID_POWERF);
 388 }
 389
 390 /**
 391  *      acpi_pm_finish - Instruct the platform to leave a sleep state.
 392  *
 393  *      This is called after we wake back up (or if entering the sleep state
 394  *      failed).
 395  */
 396 static void acpi_pm_finish(void)
 397 {
 398         struct device *pwr_btn_dev;
 399         u32 acpi_state = acpi_target_sleep_state;
 400
 401         acpi_ec_unblock_transactions();
 402         suspend_nvs_free();
 403
 404         if (acpi_state == ACPI_STATE_S0)
 405                 return;
 406
 407         printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
 408                 acpi_state);
 409         acpi_disable_wakeup_devices(acpi_state);
 410         acpi_leave_sleep_state(acpi_state);
 411
 412         /* reset firmware waking vector */
 413         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 414
 415         acpi_target_sleep_state = ACPI_STATE_S0;
 416
 417         acpi_resume_power_resources();
 418
 419         /* If we were woken with the fixed power button, provide a small
 420          * hint to userspace in the form of a wakeup event on the fixed power
 421          * button device (if it can be found).
 422          *
 423          * We delay the event generation til now, as the PM layer requires
 424          * timekeeping to be running before we generate events. */
 425         if (!pwr_btn_event_pending)
 426                 return;
 427
 428         pwr_btn_event_pending = false;
 429         pwr_btn_dev = bus_find_device(&acpi_bus_type, NULL, NULL,
 430                                       find_powerf_dev);
 431         if (pwr_btn_dev) {
 432                 pm_wakeup_event(pwr_btn_dev, 0);
 433                 put_device(pwr_btn_dev);
 434         }
 435 }
 436
 437 /**
 438  * acpi_pm_start - Start system PM transition.
 439  */
 440 static void acpi_pm_start(u32 acpi_state)
 441 {
 442         acpi_target_sleep_state = acpi_state;
 443         acpi_sleep_tts_switch(acpi_target_sleep_state);
 444         acpi_scan_lock_acquire();
 445 }
 446
 447 /**
 448  * acpi_pm_end - Finish up system PM transition.
 449  */
 450 static void acpi_pm_end(void)
 451 {
 452         acpi_scan_lock_release();
 453         /*
 454          * This is necessary in case acpi_pm_finish() is not called during a
 455          * failing transition to a sleep state.
 456          */
 457         acpi_target_sleep_state = ACPI_STATE_S0;
 458         acpi_sleep_tts_switch(acpi_target_sleep_state);
 459 }
 460 #else /* !CONFIG_ACPI_SLEEP */
 461 #define acpi_target_sleep_state ACPI_STATE_S0
 462 static inline void acpi_sleep_dmi_check(void) {}
 463 #endif /* CONFIG_ACPI_SLEEP */
 464
 465 #ifdef CONFIG_SUSPEND
 466 static u32 acpi_suspend_states[] = {
 467         [PM_SUSPEND_ON] = ACPI_STATE_S0,
 468         [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
 469         [PM_SUSPEND_MEM] = ACPI_STATE_S3,
 470         [PM_SUSPEND_MAX] = ACPI_STATE_S5
 471 };
 472
 473 /**
 474  *      acpi_suspend_begin - Set the target system sleep state to the state
 475  *              associated with given @pm_state, if supported.
 476  */
 477 static int acpi_suspend_begin(suspend_state_t pm_state)
 478 {
 479         u32 acpi_state = acpi_suspend_states[pm_state];
 480         int error;
 481
 482         error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
 483         if (error)
 484                 return error;
 485
 486         if (!sleep_states[acpi_state]) {
 487                 pr_err("ACPI does not support sleep state S%u\n", acpi_state);
 488                 return -ENOSYS;
 489         }
 490
 491         acpi_pm_start(acpi_state);
 492         return 0;
 493 }
 494
 495 /**
 496  *      acpi_suspend_enter - Actually enter a sleep state.
 497  *      @pm_state: ignored
 498  *
 499  *      Flush caches and go to sleep. For STR we have to call arch-specific
 500  *      assembly, which in turn call acpi_enter_sleep_state().
 501  *      It's unfortunate, but it works. Please fix if you're feeling frisky.
 502  */
 503 static int acpi_suspend_enter(suspend_state_t pm_state)
 504 {
 505         acpi_status status = AE_OK;
 506         u32 acpi_state = acpi_target_sleep_state;
 507         int error;
 508
 509         ACPI_FLUSH_CPU_CACHE();
 510
 511         trace_suspend_resume(TPS("acpi_suspend"), acpi_state, true);
 512         switch (acpi_state) {
 513         case ACPI_STATE_S1:
 514                 barrier();
 515                 status = acpi_enter_sleep_state(acpi_state);
 516                 break;
 517
 518         case ACPI_STATE_S3:
 519                 if (!acpi_suspend_lowlevel)
 520                         return -ENOSYS;
 521                 error = acpi_suspend_lowlevel();
 522                 if (error)
 523                         return error;
 524                 pr_info(PREFIX "Low-level resume complete\n");
 525                 break;
 526         }
 527         trace_suspend_resume(TPS("acpi_suspend"), acpi_state, false);
 528
 529         /* This violates the spec but is required for bug compatibility. */
 530         acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
 531
 532         /* Reprogram control registers */
 533         acpi_leave_sleep_state_prep(acpi_state);
 534
 535         /* ACPI 3.0 specs (P62) says that it's the responsibility
 536          * of the OSPM to clear the status bit [ implying that the
 537          * POWER_BUTTON event should not reach userspace ]
 538          *
 539          * However, we do generate a small hint for userspace in the form of
 540          * a wakeup event. We flag this condition for now and generate the
 541          * event later, as we're currently too early in resume to be able to
 542          * generate wakeup events.
 543          */
 544         if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
 545                 acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED;
 546
 547                 acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
 548
 549                 if (pwr_btn_status & ACPI_EVENT_FLAG_SET) {
 550                         acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
 551                         /* Flag for later */
 552                         pwr_btn_event_pending = true;
 553                 }
 554         }
 555
 556         /*
 557          * Disable and clear GPE status before interrupt is enabled. Some GPEs
 558          * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
 559          * acpi_leave_sleep_state will reenable specific GPEs later
 560          */
 561         acpi_disable_all_gpes();
 562         /* Allow EC transactions to happen. */
 563         acpi_ec_unblock_transactions_early();
 564
 565         suspend_nvs_restore();
 566
 567         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 568 }
 569
 570 static int acpi_suspend_state_valid(suspend_state_t pm_state)
 571 {
 572         u32 acpi_state;
 573
 574         switch (pm_state) {
 575         case PM_SUSPEND_ON:
 576         case PM_SUSPEND_STANDBY:
 577         case PM_SUSPEND_MEM:
 578                 acpi_state = acpi_suspend_states[pm_state];
 579
 580                 return sleep_states[acpi_state];
 581         default:
 582                 return 0;
 583         }
 584 }
 585
 586 static const struct platform_suspend_ops acpi_suspend_ops = {
 587         .valid = acpi_suspend_state_valid,
 588         .begin = acpi_suspend_begin,
 589         .prepare_late = acpi_pm_prepare,
 590         .enter = acpi_suspend_enter,
 591         .wake = acpi_pm_finish,
 592         .end = acpi_pm_end,
 593 };
 594
 595 /**
 596  *      acpi_suspend_begin_old - Set the target system sleep state to the
 597  *              state associated with given @pm_state, if supported, and
 598  *              execute the _PTS control method.  This function is used if the
 599  *              pre-ACPI 2.0 suspend ordering has been requested.
 600  */
 601 static int acpi_suspend_begin_old(suspend_state_t pm_state)
 602 {
 603         int error = acpi_suspend_begin(pm_state);
 604         if (!error)
 605                 error = __acpi_pm_prepare();
 606
 607         return error;
 608 }
 609
 610 /*
 611  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 612  * been requested.
 613  */
 614 static const struct platform_suspend_ops acpi_suspend_ops_old = {
 615         .valid = acpi_suspend_state_valid,
 616         .begin = acpi_suspend_begin_old,
 617         .prepare_late = acpi_pm_pre_suspend,
 618         .enter = acpi_suspend_enter,
 619         .wake = acpi_pm_finish,
 620         .end = acpi_pm_end,
 621         .recover = acpi_pm_finish,
 622 };
 623
 624 static int acpi_freeze_begin(void)
 625 {
 626         acpi_scan_lock_acquire();
 627         return 0;
 628 }
 629
 630 static int acpi_freeze_prepare(void)
 631 {
 632         acpi_enable_all_wakeup_gpes();
 633         enable_irq_wake(acpi_gbl_FADT.sci_interrupt);
 634         return 0;
 635 }
 636
 637 static void acpi_freeze_restore(void)
 638 {
 639         disable_irq_wake(acpi_gbl_FADT.sci_interrupt);
 640         acpi_enable_all_runtime_gpes();
 641 }
 642
 643 static void acpi_freeze_end(void)
 644 {
 645         acpi_scan_lock_release();
 646 }
 647
 648 static const struct platform_freeze_ops acpi_freeze_ops = {
 649         .begin = acpi_freeze_begin,
 650         .prepare = acpi_freeze_prepare,
 651         .restore = acpi_freeze_restore,
 652         .end = acpi_freeze_end,
 653 };
 654
 655 static void acpi_sleep_suspend_setup(void)
 656 {
 657         int i;
 658
 659         for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++)
 660                 if (acpi_sleep_state_supported(i))
 661                         sleep_states[i] = 1;
 662
 663         suspend_set_ops(old_suspend_ordering ?
 664                 &acpi_suspend_ops_old : &acpi_suspend_ops);
 665         freeze_set_ops(&acpi_freeze_ops);
 666 }
 667
 668 #else /* !CONFIG_SUSPEND */
 669 static inline void acpi_sleep_suspend_setup(void) {}
 670 #endif /* !CONFIG_SUSPEND */
 671
 672 #ifdef CONFIG_HIBERNATION
 673 static unsigned long s4_hardware_signature;
 674 static struct acpi_table_facs *facs;
 675 static bool nosigcheck;
 676
 677 void __init acpi_no_s4_hw_signature(void)
 678 {
 679         nosigcheck = true;
 680 }
 681
 682 static int acpi_hibernation_begin(void)
 683 {
 684         int error;
 685
 686         error = nvs_nosave ? 0 : suspend_nvs_alloc();
 687         if (!error)
 688                 acpi_pm_start(ACPI_STATE_S4);
 689
 690         return error;
 691 }
 692
 693 static int acpi_hibernation_enter(void)
 694 {
 695         acpi_status status = AE_OK;
 696
 697         ACPI_FLUSH_CPU_CACHE();
 698
 699         /* This shouldn't return.  If it returns, we have a problem */
 700         status = acpi_enter_sleep_state(ACPI_STATE_S4);
 701         /* Reprogram control registers */
 702         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 703
 704         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 705 }
 706
 707 static void acpi_hibernation_leave(void)
 708 {
 709         /*
 710          * If ACPI is not enabled by the BIOS and the boot kernel, we need to
 711          * enable it here.
 712          */
 713         acpi_enable();
 714         /* Reprogram control registers */
 715         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 716         /* Check the hardware signature */
 717         if (facs && s4_hardware_signature != facs->hardware_signature)
 718                 pr_crit("ACPI: Hardware changed while hibernated, success doubtful!\n");
 719         /* Restore the NVS memory area */
 720         suspend_nvs_restore();
 721         /* Allow EC transactions to happen. */
 722         acpi_ec_unblock_transactions_early();
 723 }
 724
 725 static void acpi_pm_thaw(void)
 726 {
 727         acpi_ec_unblock_transactions();
 728         acpi_enable_all_runtime_gpes();
 729 }
 730
 731 static const struct platform_hibernation_ops acpi_hibernation_ops = {
 732         .begin = acpi_hibernation_begin,
 733         .end = acpi_pm_end,
 734         .pre_snapshot = acpi_pm_prepare,
 735         .finish = acpi_pm_finish,
 736         .prepare = acpi_pm_prepare,
 737         .enter = acpi_hibernation_enter,
 738         .leave = acpi_hibernation_leave,
 739         .pre_restore = acpi_pm_freeze,
 740         .restore_cleanup = acpi_pm_thaw,
 741 };
 742
 743 /**
 744  *      acpi_hibernation_begin_old - Set the target system sleep state to
 745  *              ACPI_STATE_S4 and execute the _PTS control method.  This
 746  *              function is used if the pre-ACPI 2.0 suspend ordering has been
 747  *              requested.
 748  */
 749 static int acpi_hibernation_begin_old(void)
 750 {
 751         int error;
 752         /*
 753          * The _TTS object should always be evaluated before the _PTS object.
 754          * When the old_suspended_ordering is true, the _PTS object is
 755          * evaluated in the acpi_sleep_prepare.
 756          */
 757         acpi_sleep_tts_switch(ACPI_STATE_S4);
 758
 759         error = acpi_sleep_prepare(ACPI_STATE_S4);
 760
 761         if (!error) {
 762                 if (!nvs_nosave)
 763                         error = suspend_nvs_alloc();
 764                 if (!error) {
 765                         acpi_target_sleep_state = ACPI_STATE_S4;
 766                         acpi_scan_lock_acquire();
 767                 }
 768         }
 769         return error;
 770 }
 771
 772 /*
 773  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 774  * been requested.
 775  */
 776 static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
 777         .begin = acpi_hibernation_begin_old,
 778         .end = acpi_pm_end,
 779         .pre_snapshot = acpi_pm_pre_suspend,
 780         .prepare = acpi_pm_freeze,
 781         .finish = acpi_pm_finish,
 782         .enter = acpi_hibernation_enter,
 783         .leave = acpi_hibernation_leave,
 784         .pre_restore = acpi_pm_freeze,
 785         .restore_cleanup = acpi_pm_thaw,
 786         .recover = acpi_pm_finish,
 787 };
 788
 789 static void acpi_sleep_hibernate_setup(void)
 790 {
 791         if (!acpi_sleep_state_supported(ACPI_STATE_S4))
 792                 return;
 793
 794         hibernation_set_ops(old_suspend_ordering ?
 795                         &acpi_hibernation_ops_old : &acpi_hibernation_ops);
 796         sleep_states[ACPI_STATE_S4] = 1;
 797         if (nosigcheck)
 798                 return;
 799
 800         acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs);
 801         if (facs)
 802                 s4_hardware_signature = facs->hardware_signature;
 803 }
 804 #else /* !CONFIG_HIBERNATION */
 805 static inline void acpi_sleep_hibernate_setup(void) {}
 806 #endif /* !CONFIG_HIBERNATION */
 807
 808 int acpi_suspend(u32 acpi_state)
 809 {
 810         suspend_state_t states[] = {
 811                 [1] = PM_SUSPEND_STANDBY,
 812                 [3] = PM_SUSPEND_MEM,
 813                 [5] = PM_SUSPEND_MAX
 814         };
 815
 816         if (acpi_state < 6 && states[acpi_state])
 817                 return pm_suspend(states[acpi_state]);
 818         if (acpi_state == 4)
 819                 return hibernate();
 820         return -EINVAL;
 821 }
 822
 823 static void acpi_power_off_prepare(void)
 824 {
 825         /* Prepare to power off the system */
 826         acpi_sleep_prepare(ACPI_STATE_S5);
 827         acpi_disable_all_gpes();
 828 }
 829
 830 static void acpi_power_off(void)
 831 {
 832         /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
 833         printk(KERN_DEBUG "%s called\n", __func__);
 834         local_irq_disable();
 835         acpi_enter_sleep_state(ACPI_STATE_S5);
 836 }
 837
 838 int __init acpi_sleep_init(void)
 839 {
 840         char supported[ACPI_S_STATE_COUNT * 3 + 1];
 841         char *pos = supported;
 842         int i;
 843
 844         acpi_sleep_dmi_check();
 845
 846         sleep_states[ACPI_STATE_S0] = 1;
 847
 848         acpi_sleep_suspend_setup();
 849         acpi_sleep_hibernate_setup();
 850
 851         if (acpi_sleep_state_supported(ACPI_STATE_S5)) {
 852                 sleep_states[ACPI_STATE_S5] = 1;
 853                 pm_power_off_prepare = acpi_power_off_prepare;
 854                 pm_power_off = acpi_power_off;
 855         }
 856
 857         supported[0] = 0;
 858         for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
 859                 if (sleep_states[i])
 860                         pos += sprintf(pos, " S%d", i);
 861         }
 862         pr_info(PREFIX "(supports%s)\n", supported);
 863
 864         /*
 865          * Register the tts_notifier to reboot notifier list so that the _TTS
 866          * object can also be evaluated when the system enters S5.
 867          */
 868         register_reboot_notifier(&tts_notifier);
 869         return 0;
 870 }