drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers (libata)"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         select GLOB
  20         ---help---
  21           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  22           any other ATA device under Linux, say Y and make sure that you know
  23           the name of your ATA host adapter (the card inside your computer
  24           that "speaks" the ATA protocol, also called ATA controller),
  25           because you will be asked for it.
  26
  27           NOTE: ATA enables basic SCSI support; *however*,
  28           'SCSI disk support', 'SCSI tape support', or
  29           'SCSI CDROM support' may also be needed,
  30           depending on your hardware configuration.
  31
  32 if ATA
  33
  34 config ATA_NONSTANDARD
  35        bool
  36        default n
  37
  38 config ATA_VERBOSE_ERROR
  39         bool "Verbose ATA error reporting"
  40         default y
  41         help
  42           This option adds parsing of ATA command descriptions and error bits
  43           in libata kernel output, making it easier to interpret.
  44           This option will enlarge the kernel by approx. 6KB. Disable it only
  45           if kernel size is more important than ease of debugging.
  46
  47           If unsure, say Y.
  48
  49 config ATA_ACPI
  50         bool "ATA ACPI Support"
  51         depends on ACPI
  52         default y
  53         help
  54           This option adds support for ATA-related ACPI objects.
  55           These ACPI objects add the ability to retrieve taskfiles
  56           from the ACPI BIOS and write them to the disk controller.
  57           These objects may be related to performance, security,
  58           power management, or other areas.
  59           You can disable this at kernel boot time by using the
  60           option libata.noacpi=1
  61
  62 config SATA_ZPODD
  63         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  64         depends on ATA_ACPI && PM
  65         default n
  66         help
  67           This option adds support for SATA Zero Power Optical Disc
  68           Drive (ZPODD). It requires both the ODD and the platform
  69           support, and if enabled, will automatically power on/off the
  70           ODD when certain condition is satisfied. This does not impact
  71           end user's experience of the ODD, only power is saved when
  72           the ODD is not in use (i.e. no disc inside).
  73
  74           If unsure, say N.
  75
  76 config SATA_PMP
  77         bool "SATA Port Multiplier support"
  78         default y
  79         help
  80           This option adds support for SATA Port Multipliers
  81           (the SATA version of an ethernet hub, or SAS expander).
  82
  83 comment "Controllers with non-SFF native interface"
  84
  85 config SATA_AHCI
  86         tristate "AHCI SATA support"
  87         depends on PCI
  88         help
  89           This option enables support for AHCI Serial ATA.
  90
  91           If unsure, say N.
  92
  93 config SATA_AHCI_PLATFORM
  94         tristate "Platform AHCI SATA support"
  95         help
  96           This option enables support for Platform AHCI Serial ATA
  97           controllers.
  98
  99           If unsure, say N.
 100
 101 config AHCI_BRCMSTB
 102         tristate "Broadcom STB AHCI SATA support"
 103         depends on ARCH_BRCMSTB
 104         help
 105           This option enables support for the AHCI SATA3 controller found on
 106           STB SoC's.
 107
 108           If unsure, say N.
 109
 110 config AHCI_DA850
 111         tristate "DaVinci DA850 AHCI SATA support"
 112         depends on ARCH_DAVINCI_DA850
 113         help
 114           This option enables support for the DaVinci DA850 SoC's
 115           onboard AHCI SATA.
 116
 117           If unsure, say N.
 118
 119 config AHCI_ST
 120         tristate "ST AHCI SATA support"
 121         depends on ARCH_STI
 122         help
 123           This option enables support for ST AHCI SATA controller.
 124
 125           If unsure, say N.
 126
 127 config AHCI_IMX
 128         tristate "Freescale i.MX AHCI SATA support"
 129         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 130         help
 131           This option enables support for the Freescale i.MX SoC's
 132           onboard AHCI SATA.
 133
 134           If unsure, say N.
 135
 136 config AHCI_CEVA
 137         tristate "CEVA AHCI SATA support"
 138         depends on OF
 139         help
 140           This option enables support for the CEVA AHCI SATA.
 141           It can be found on the Xilinx Zynq UltraScale+ MPSoC.
 142
 143           If unsure, say N.
 144
 145 config AHCI_MVEBU
 146         tristate "Marvell EBU AHCI SATA support"
 147         depends on ARCH_MVEBU
 148         help
 149           This option enables support for the Marvebu EBU SoC's
 150           onboard AHCI SATA.
 151
 152           If unsure, say N.
 153
 154 config AHCI_SUNXI
 155         tristate "Allwinner sunxi AHCI SATA support"
 156         depends on ARCH_SUNXI
 157         help
 158           This option enables support for the Allwinner sunxi SoC's
 159           onboard AHCI SATA.
 160
 161           If unsure, say N.
 162
 163 config AHCI_TEGRA
 164         tristate "NVIDIA Tegra124 AHCI SATA support"
 165         depends on ARCH_TEGRA
 166         help
 167           This option enables support for the NVIDIA Tegra124 SoC's
 168           onboard AHCI SATA.
 169
 170           If unsure, say N.
 171
 172 config AHCI_XGENE
 173         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 174         depends on PHY_XGENE
 175         help
 176          This option enables support for APM X-Gene SoC SATA host controller.
 177
 178 config SATA_FSL
 179         tristate "Freescale 3.0Gbps SATA support"
 180         depends on FSL_SOC
 181         help
 182           This option enables support for Freescale 3.0Gbps SATA controller.
 183           It can be found on MPC837x and MPC8315.
 184
 185           If unsure, say N.
 186
 187 config SATA_INIC162X
 188         tristate "Initio 162x SATA support (Very Experimental)"
 189         depends on PCI
 190         help
 191           This option enables support for Initio 162x Serial ATA.
 192
 193 config SATA_ACARD_AHCI
 194         tristate "ACard AHCI variant (ATP 8620)"
 195         depends on PCI
 196         help
 197           This option enables support for Acard.
 198
 199           If unsure, say N.
 200
 201 config SATA_SIL24
 202         tristate "Silicon Image 3124/3132 SATA support"
 203         depends on PCI
 204         help
 205           This option enables support for Silicon Image 3124/3132 Serial ATA.
 206
 207           If unsure, say N.
 208
 209 config ATA_SFF
 210         bool "ATA SFF support (for legacy IDE and PATA)"
 211         default y
 212         help
 213           This option adds support for ATA controllers with SFF
 214           compliant or similar programming interface.
 215
 216           SFF is the legacy IDE interface that has been around since
 217           the dawn of time.  Almost all PATA controllers have an
 218           SFF interface.  Many SATA controllers have an SFF interface
 219           when configured into a legacy compatibility mode.
 220
 221           For users with exclusively modern controllers like AHCI,
 222           Silicon Image 3124, or Marvell 6440, you may choose to
 223           disable this unneeded SFF support.
 224
 225           If unsure, say Y.
 226
 227 if ATA_SFF
 228
 229 comment "SFF controllers with custom DMA interface"
 230
 231 config PDC_ADMA
 232         tristate "Pacific Digital ADMA support"
 233         depends on PCI
 234         help
 235           This option enables support for Pacific Digital ADMA controllers
 236
 237           If unsure, say N.
 238
 239 config PATA_OCTEON_CF
 240         tristate "OCTEON Boot Bus Compact Flash support"
 241         depends on CAVIUM_OCTEON_SOC
 242         help
 243           This option enables a polled compact flash driver for use with
 244           compact flash cards attached to the OCTEON boot bus.
 245
 246           If unsure, say N.
 247
 248 config SATA_QSTOR
 249         tristate "Pacific Digital SATA QStor support"
 250         depends on PCI
 251         help
 252           This option enables support for Pacific Digital Serial ATA QStor.
 253
 254           If unsure, say N.
 255
 256 config SATA_SX4
 257         tristate "Promise SATA SX4 support (Experimental)"
 258         depends on PCI
 259         help
 260           This option enables support for Promise Serial ATA SX4.
 261
 262           If unsure, say N.
 263
 264 config ATA_BMDMA
 265         bool "ATA BMDMA support"
 266         default y
 267         help
 268           This option adds support for SFF ATA controllers with BMDMA
 269           capability.  BMDMA stands for bus-master DMA and is the
 270           de facto DMA interface for SFF controllers.
 271
 272           If unsure, say Y.
 273
 274 if ATA_BMDMA
 275
 276 comment "SATA SFF controllers with BMDMA"
 277
 278 config ATA_PIIX
 279         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 280         depends on PCI
 281         help
 282           This option enables support for ICH5/6/7/8 Serial ATA
 283           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 284           host controllers.
 285
 286           If unsure, say N.
 287
 288 config SATA_DWC
 289         tristate "DesignWare Cores SATA support"
 290         depends on 460EX
 291         select DW_DMAC
 292         help
 293           This option enables support for the on-chip SATA controller of the
 294           AppliedMicro processor 460EX.
 295
 296           If unsure, say N.
 297
 298 config SATA_DWC_DEBUG
 299         bool "Debugging driver version"
 300         depends on SATA_DWC
 301         help
 302           This option enables debugging output in the driver.
 303
 304 config SATA_DWC_VDEBUG
 305         bool "Verbose debug output"
 306         depends on SATA_DWC_DEBUG
 307         help
 308           This option enables the taskfile dumping and NCQ debugging.
 309
 310 config SATA_HIGHBANK
 311         tristate "Calxeda Highbank SATA support"
 312         depends on ARCH_HIGHBANK || COMPILE_TEST
 313         help
 314           This option enables support for the Calxeda Highbank SoC's
 315           onboard SATA.
 316
 317           If unsure, say N.
 318
 319 config SATA_MV
 320         tristate "Marvell SATA support"
 321         depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 322                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 323         select GENERIC_PHY
 324         help
 325           This option enables support for the Marvell Serial ATA family.
 326           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 327           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 328
 329           If unsure, say N.
 330
 331 config SATA_NV
 332         tristate "NVIDIA SATA support"
 333         depends on PCI
 334         help
 335           This option enables support for NVIDIA Serial ATA.
 336
 337           If unsure, say N.
 338
 339 config SATA_PROMISE
 340         tristate "Promise SATA TX2/TX4 support"
 341         depends on PCI
 342         help
 343           This option enables support for Promise Serial ATA TX2/TX4.
 344
 345           If unsure, say N.
 346
 347 config SATA_RCAR
 348         tristate "Renesas R-Car SATA support"
 349         depends on ARCH_SHMOBILE || COMPILE_TEST
 350         help
 351           This option enables support for Renesas R-Car Serial ATA.
 352
 353           If unsure, say N.
 354
 355 config SATA_SIL
 356         tristate "Silicon Image SATA support"
 357         depends on PCI
 358         help
 359           This option enables support for Silicon Image Serial ATA.
 360
 361           If unsure, say N.
 362
 363 config SATA_SIS
 364         tristate "SiS 964/965/966/180 SATA support"
 365         depends on PCI
 366         select PATA_SIS
 367         help
 368           This option enables support for SiS Serial ATA on
 369           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 370           The PATA support for SiS 180 requires additionally to
 371           enable the PATA_SIS driver in the config.
 372           If unsure, say N.
 373
 374 config SATA_SVW
 375         tristate "ServerWorks Frodo / Apple K2 SATA support"
 376         depends on PCI
 377         help
 378           This option enables support for Broadcom/Serverworks/Apple K2
 379           SATA support.
 380
 381           If unsure, say N.
 382
 383 config SATA_ULI
 384         tristate "ULi Electronics SATA support"
 385         depends on PCI
 386         help
 387           This option enables support for ULi Electronics SATA.
 388
 389           If unsure, say N.
 390
 391 config SATA_VIA
 392         tristate "VIA SATA support"
 393         depends on PCI
 394         help
 395           This option enables support for VIA Serial ATA.
 396
 397           If unsure, say N.
 398
 399 config SATA_VITESSE
 400         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 401         depends on PCI
 402         help
 403           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 404
 405           If unsure, say N.
 406
 407 comment "PATA SFF controllers with BMDMA"
 408
 409 config PATA_ALI
 410         tristate "ALi PATA support"
 411         depends on PCI
 412         help
 413           This option enables support for the ALi ATA interfaces
 414           found on the many ALi chipsets.
 415
 416           If unsure, say N.
 417
 418 config PATA_AMD
 419         tristate "AMD/NVidia PATA support"
 420         depends on PCI
 421         help
 422           This option enables support for the AMD and NVidia PATA
 423           interfaces found on the chipsets for Athlon/Athlon64.
 424
 425           If unsure, say N.
 426
 427 config PATA_ARASAN_CF
 428         tristate "ARASAN CompactFlash PATA Controller Support"
 429         depends on ARCH_SPEAR13XX || COMPILE_TEST
 430         depends on DMADEVICES
 431         select DMA_ENGINE
 432         help
 433           Say Y here to support the ARASAN CompactFlash PATA controller
 434
 435 config PATA_ARTOP
 436         tristate "ARTOP 6210/6260 PATA support"
 437         depends on PCI
 438         help
 439           This option enables support for ARTOP PATA controllers.
 440
 441           If unsure, say N.
 442
 443 config PATA_ATIIXP
 444         tristate "ATI PATA support"
 445         depends on PCI
 446         help
 447           This option enables support for the ATI ATA interfaces
 448           found on the many ATI chipsets.
 449
 450           If unsure, say N.
 451
 452 config PATA_ATP867X
 453         tristate "ARTOP/Acard ATP867X PATA support"
 454         depends on PCI
 455         help
 456           This option enables support for ARTOP/Acard ATP867X PATA
 457           controllers.
 458
 459           If unsure, say N.
 460
 461 config PATA_BF54X
 462         tristate "Blackfin 54x ATAPI support"
 463         depends on BF542 || BF548 || BF549
 464         help
 465           This option enables support for the built-in ATAPI controller on
 466           Blackfin 54x family chips.
 467
 468           If unsure, say N.
 469
 470 config PATA_CMD64X
 471         tristate "CMD64x PATA support"
 472         depends on PCI
 473         help
 474           This option enables support for the CMD64x series chips
 475           except for the CMD640.
 476
 477           If unsure, say N.
 478
 479 config PATA_CS5520
 480         tristate "CS5510/5520 PATA support"
 481         depends on PCI && (X86_32 || COMPILE_TEST)
 482         help
 483           This option enables support for the Cyrix 5510/5520
 484           companion chip used with the MediaGX/Geode processor family.
 485
 486           If unsure, say N.
 487
 488 config PATA_CS5530
 489         tristate "CS5530 PATA support"
 490         depends on PCI && (X86_32 || COMPILE_TEST)
 491         help
 492           This option enables support for the Cyrix/NatSemi/AMD CS5530
 493           companion chip used with the MediaGX/Geode processor family.
 494
 495           If unsure, say N.
 496
 497 config PATA_CS5535
 498         tristate "CS5535 PATA support (Experimental)"
 499         depends on PCI && X86_32
 500         help
 501           This option enables support for the NatSemi/AMD CS5535
 502           companion chip used with the Geode processor family.
 503
 504           If unsure, say N.
 505
 506 config PATA_CS5536
 507         tristate "CS5536 PATA support"
 508         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 509         help
 510           This option enables support for the AMD CS5536
 511           companion chip used with the Geode LX processor family.
 512
 513           If unsure, say N.
 514
 515 config PATA_CYPRESS
 516         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 517         depends on PCI
 518         help
 519           This option enables support for the Cypress/Contaq CY82C693
 520           chipset found in some Alpha systems
 521
 522           If unsure, say N.
 523
 524 config PATA_EFAR
 525         tristate "EFAR SLC90E66 support"
 526         depends on PCI
 527         help
 528           This option enables support for the EFAR SLC90E66
 529           IDE controller found on some older machines.
 530
 531           If unsure, say N.
 532
 533 config PATA_EP93XX
 534         tristate "Cirrus Logic EP93xx PATA support"
 535         depends on ARCH_EP93XX
 536         help
 537           This option enables support for the PATA controller in
 538           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 539
 540           If unsure, say N.
 541
 542 config PATA_HPT366
 543         tristate "HPT 366/368 PATA support"
 544         depends on PCI
 545         help
 546           This option enables support for the HPT 366 and 368
 547           PATA controllers via the new ATA layer.
 548
 549           If unsure, say N.
 550
 551 config PATA_HPT37X
 552         tristate "HPT 370/370A/371/372/374/302 PATA support"
 553         depends on PCI
 554         help
 555           This option enables support for the majority of the later HPT
 556           PATA controllers via the new ATA layer.
 557
 558           If unsure, say N.
 559
 560 config PATA_HPT3X2N
 561         tristate "HPT 371N/372N/302N PATA support"
 562         depends on PCI
 563         help
 564           This option enables support for the N variant HPT PATA
 565           controllers via the new ATA layer.
 566
 567           If unsure, say N.
 568
 569 config PATA_HPT3X3
 570         tristate "HPT 343/363 PATA support"
 571         depends on PCI
 572         help
 573           This option enables support for the HPT 343/363
 574           PATA controllers via the new ATA layer
 575
 576           If unsure, say N.
 577
 578 config PATA_HPT3X3_DMA
 579         bool "HPT 343/363 DMA support"
 580         depends on PATA_HPT3X3
 581         help
 582           This option enables DMA support for the HPT343/363
 583           controllers. Enable with care as there are still some
 584           problems with DMA on this chipset.
 585
 586 config PATA_ICSIDE
 587         tristate "Acorn ICS PATA support"
 588         depends on ARM && ARCH_ACORN
 589         help
 590           On Acorn systems, say Y here if you wish to use the ICS PATA
 591           interface card.  This is not required for ICS partition support.
 592           If you are unsure, say N to this.
 593
 594 config PATA_IMX
 595         tristate "PATA support for Freescale iMX"
 596         depends on ARCH_MXC
 597         help
 598           This option enables support for the PATA host available on Freescale
 599           iMX SoCs.
 600
 601           If unsure, say N.
 602
 603 config PATA_IT8213
 604         tristate "IT8213 PATA support (Experimental)"
 605         depends on PCI
 606         help
 607           This option enables support for the ITE 821 PATA
 608           controllers via the new ATA layer.
 609
 610           If unsure, say N.
 611
 612 config PATA_IT821X
 613         tristate "IT8211/2 PATA support"
 614         depends on PCI
 615         help
 616           This option enables support for the ITE 8211 and 8212
 617           PATA controllers via the new ATA layer, including RAID
 618           mode.
 619
 620           If unsure, say N.
 621
 622 config PATA_JMICRON
 623         tristate "JMicron PATA support"
 624         depends on PCI
 625         help
 626           Enable support for the JMicron IDE controller, via the new
 627           ATA layer.
 628
 629           If unsure, say N.
 630
 631 config PATA_MACIO
 632         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 633         depends on PPC_PMAC
 634         help
 635           Most IDE capable PowerMacs have IDE busses driven by a variant
 636           of this controller which is part of the Apple chipset used on
 637           most PowerMac models. Some models have multiple busses using
 638           different chipsets, though generally, MacIO is one of them.
 639
 640 config PATA_MARVELL
 641         tristate "Marvell PATA support via legacy mode"
 642         depends on PCI
 643         help
 644           This option enables limited support for the Marvell 88SE61xx ATA
 645           controllers. If you wish to use only the SATA ports then select
 646           the AHCI driver alone. If you wish to the use the PATA port or
 647           both SATA and PATA include this driver.
 648
 649           If unsure, say N.
 650
 651 config PATA_MPC52xx
 652         tristate "Freescale MPC52xx SoC internal IDE"
 653         depends on PPC_MPC52xx && PPC_BESTCOMM
 654         select PPC_BESTCOMM_ATA
 655         help
 656           This option enables support for integrated IDE controller
 657           of the Freescale MPC52xx SoC.
 658
 659           If unsure, say N.
 660
 661 config PATA_NETCELL
 662         tristate "NETCELL Revolution RAID support"
 663         depends on PCI
 664         help
 665           This option enables support for the Netcell Revolution RAID
 666           PATA controller.
 667
 668           If unsure, say N.
 669
 670 config PATA_NINJA32
 671         tristate "Ninja32/Delkin Cardbus ATA support"
 672         depends on PCI
 673         help
 674           This option enables support for the Ninja32, Delkin and
 675           possibly other brands of Cardbus ATA adapter
 676
 677           If unsure, say N.
 678
 679 config PATA_NS87415
 680         tristate "Nat Semi NS87415 PATA support"
 681         depends on PCI
 682         help
 683           This option enables support for the National Semiconductor
 684           NS87415 PCI-IDE controller.
 685
 686           If unsure, say N.
 687
 688 config PATA_OLDPIIX
 689         tristate "Intel PATA old PIIX support"
 690         depends on PCI
 691         help
 692           This option enables support for early PIIX PATA support.
 693
 694           If unsure, say N.
 695
 696 config PATA_OPTIDMA
 697         tristate "OPTI FireStar PATA support (Very Experimental)"
 698         depends on PCI
 699         help
 700           This option enables DMA/PIO support for the later OPTi
 701           controllers found on some old motherboards and in some
 702           laptops.
 703
 704           If unsure, say N.
 705
 706 config PATA_PDC2027X
 707         tristate "Promise PATA 2027x support"
 708         depends on PCI
 709         help
 710           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 711
 712           If unsure, say N.
 713
 714 config PATA_PDC_OLD
 715         tristate "Older Promise PATA controller support"
 716         depends on PCI
 717         help
 718           This option enables support for the Promise 20246, 20262, 20263,
 719           20265 and 20267 adapters.
 720
 721           If unsure, say N.
 722
 723 config PATA_RADISYS
 724         tristate "RADISYS 82600 PATA support (Experimental)"
 725         depends on PCI
 726         help
 727           This option enables support for the RADISYS 82600
 728           PATA controllers via the new ATA layer
 729
 730           If unsure, say N.
 731
 732 config PATA_RDC
 733         tristate "RDC PATA support"
 734         depends on PCI
 735         help
 736           This option enables basic support for the later RDC PATA controllers
 737           controllers via the new ATA layer. For the RDC 1010, you need to
 738           enable the IT821X driver instead.
 739
 740           If unsure, say N.
 741
 742 config PATA_SC1200
 743         tristate "SC1200 PATA support"
 744         depends on PCI && (X86_32 || COMPILE_TEST)
 745         help
 746           This option enables support for the NatSemi/AMD SC1200 SoC
 747           companion chip used with the Geode processor family.
 748
 749           If unsure, say N.
 750
 751 config PATA_SCH
 752         tristate "Intel SCH PATA support"
 753         depends on PCI
 754         help
 755           This option enables support for Intel SCH PATA on the Intel
 756           SCH (US15W, US15L, UL11L) series host controllers.
 757
 758           If unsure, say N.
 759
 760 config PATA_SERVERWORKS
 761         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 762         depends on PCI
 763         help
 764           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 765           HT1000 PATA controllers, via the new ATA layer.
 766
 767           If unsure, say N.
 768
 769 config PATA_SIL680
 770         tristate "CMD / Silicon Image 680 PATA support"
 771         depends on PCI
 772         help
 773           This option enables support for CMD / Silicon Image 680 PATA.
 774
 775           If unsure, say N.
 776
 777 config PATA_SIS
 778         tristate "SiS PATA support"
 779         depends on PCI
 780         help
 781           This option enables support for SiS PATA controllers
 782
 783           If unsure, say N.
 784
 785 config PATA_TOSHIBA
 786         tristate "Toshiba Piccolo support (Experimental)"
 787         depends on PCI
 788         help
 789           Support for the Toshiba Piccolo controllers. Currently only the
 790           primary channel is supported by this driver.
 791
 792           If unsure, say N.
 793
 794 config PATA_TRIFLEX
 795         tristate "Compaq Triflex PATA support"
 796         depends on PCI
 797         help
 798           Enable support for the Compaq 'Triflex' IDE controller as found
 799           on many Compaq Pentium-Pro systems, via the new ATA layer.
 800
 801           If unsure, say N.
 802
 803 config PATA_VIA
 804         tristate "VIA PATA support"
 805         depends on PCI
 806         help
 807           This option enables support for the VIA PATA interfaces
 808           found on the many VIA chipsets.
 809
 810           If unsure, say N.
 811
 812 config PATA_PXA
 813         tristate "PXA DMA-capable PATA support"
 814         depends on ARCH_PXA
 815         help
 816           This option enables support for harddrive attached to PXA CPU's bus.
 817
 818           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 819                 is not capable of doing MWDMA, use pata_platform instead.
 820
 821           If unsure, say N.
 822
 823 config PATA_WINBOND
 824         tristate "Winbond SL82C105 PATA support"
 825         depends on PCI
 826         help
 827           This option enables support for SL82C105 PATA devices found in the
 828           Netwinder and some other systems
 829
 830           If unsure, say N.
 831
 832 endif # ATA_BMDMA
 833
 834 comment "PIO-only SFF controllers"
 835
 836 config PATA_AT32
 837         tristate "Atmel AVR32 PATA support (Experimental)"
 838         depends on AVR32 && PLATFORM_AT32AP
 839         help
 840           This option enables support for the IDE devices on the
 841           Atmel AT32AP platform.
 842
 843           If unsure, say N.
 844
 845 config PATA_AT91
 846         tristate "PATA support for AT91SAM9260"
 847         depends on ARM && SOC_AT91SAM9
 848         help
 849           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 850
 851           If unsure, say N.
 852
 853 config PATA_CMD640_PCI
 854         tristate "CMD640 PCI PATA support (Experimental)"
 855         depends on PCI
 856         help
 857           This option enables support for the CMD640 PCI IDE
 858           interface chip. Only the primary channel is currently
 859           supported.
 860
 861           If unsure, say N.
 862
 863 config PATA_ISAPNP
 864         tristate "ISA Plug and Play PATA support"
 865         depends on ISAPNP
 866         help
 867           This option enables support for ISA plug & play ATA
 868           controllers such as those found on old soundcards.
 869
 870           If unsure, say N.
 871
 872 config PATA_IXP4XX_CF
 873         tristate "IXP4XX Compact Flash support"
 874         depends on ARCH_IXP4XX
 875         help
 876           This option enables support for a Compact Flash connected on
 877           the ixp4xx expansion bus. This driver had been written for
 878           Loft/Avila boards in mind but can work with others.
 879
 880           If unsure, say N.
 881
 882 config PATA_MPIIX
 883         tristate "Intel PATA MPIIX support"
 884         depends on PCI
 885         help
 886           This option enables support for MPIIX PATA support.
 887
 888           If unsure, say N.
 889
 890 config PATA_NS87410
 891         tristate "Nat Semi NS87410 PATA support"
 892         depends on PCI
 893         help
 894           This option enables support for the National Semiconductor
 895           NS87410 PCI-IDE controller.
 896
 897           If unsure, say N.
 898
 899 config PATA_OPTI
 900         tristate "OPTI621/6215 PATA support (Very Experimental)"
 901         depends on PCI
 902         help
 903           This option enables full PIO support for the early Opti ATA
 904           controllers found on some old motherboards.
 905
 906           If unsure, say N.
 907
 908 config PATA_PALMLD
 909         tristate "Palm LifeDrive PATA support"
 910         depends on MACH_PALMLD
 911         help
 912           This option enables support for Palm LifeDrive's internal ATA
 913           port via the new ATA layer.
 914
 915           If unsure, say N.
 916
 917 config PATA_PCMCIA
 918         tristate "PCMCIA PATA support"
 919         depends on PCMCIA
 920         help
 921           This option enables support for PCMCIA ATA interfaces, including
 922           compact flash card adapters via the new ATA layer.
 923
 924           If unsure, say N.
 925
 926 config PATA_PLATFORM
 927         tristate "Generic platform device PATA support"
 928         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 929         help
 930           This option enables support for generic directly connected ATA
 931           devices commonly found on embedded systems.
 932
 933           If unsure, say N.
 934
 935 config PATA_OF_PLATFORM
 936         tristate "OpenFirmware platform device PATA support"
 937         depends on PATA_PLATFORM && OF
 938         help
 939           This option enables support for generic directly connected ATA
 940           devices commonly found on embedded systems with OpenFirmware
 941           bindings.
 942
 943           If unsure, say N.
 944
 945 config PATA_QDI
 946         tristate "QDI VLB PATA support"
 947         depends on ISA
 948         select PATA_LEGACY
 949         help
 950           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 951
 952 config PATA_RB532
 953         tristate "RouterBoard 532 PATA CompactFlash support"
 954         depends on MIKROTIK_RB532
 955         help
 956           This option enables support for the RouterBoard 532
 957           PATA CompactFlash controller.
 958
 959           If unsure, say N.
 960
 961 config PATA_RZ1000
 962         tristate "PC Tech RZ1000 PATA support"
 963         depends on PCI
 964         help
 965           This option enables basic support for the PC Tech RZ1000/1
 966           PATA controllers via the new ATA layer
 967
 968           If unsure, say N.
 969
 970 config PATA_SAMSUNG_CF
 971         tristate "Samsung SoC PATA support"
 972         depends on SAMSUNG_DEV_IDE
 973         help
 974           This option enables basic support for Samsung's S3C/S5P board
 975           PATA controllers via the new ATA layer
 976
 977           If unsure, say N.
 978
 979 config PATA_WINBOND_VLB
 980         tristate "Winbond W83759A VLB PATA support (Experimental)"
 981         depends on ISA
 982         select PATA_LEGACY
 983         help
 984           Support for the Winbond W83759A controller on Vesa Local Bus
 985           systems.
 986
 987 comment "Generic fallback / legacy drivers"
 988
 989 config PATA_ACPI
 990         tristate "ACPI firmware driver for PATA"
 991         depends on ATA_ACPI && ATA_BMDMA
 992         help
 993           This option enables an ACPI method driver which drives
 994           motherboard PATA controller interfaces through the ACPI
 995           firmware in the BIOS. This driver can sometimes handle
 996           otherwise unsupported hardware.
 997
 998 config ATA_GENERIC
 999         tristate "Generic ATA support"
1000         depends on PCI && ATA_BMDMA
1001         help
1002           This option enables support for generic BIOS configured
1003           ATA controllers via the new ATA layer
1004
1005           If unsure, say N.
1006
1007 config PATA_LEGACY
1008         tristate "Legacy ISA PATA support (Experimental)"
1009         depends on (ISA || PCI)
1010         help
1011           This option enables support for ISA/VLB/PCI bus legacy PATA
1012           ports and allows them to be accessed via the new ATA layer.
1013
1014           If unsure, say N.
1015
1016 endif # ATA_SFF
1017 endif # ATA