drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 menuconfig ATA
   6         tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
   7         depends on HAS_IOMEM
   8         depends on BLOCK
   9         depends on !(M32R || M68K) || BROKEN
  10         depends on !SUN4 || BROKEN
  11         select SCSI
  12         ---help---
  13           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  14           any other ATA device under Linux, say Y and make sure that you know
  15           the name of your ATA host adapter (the card inside your computer
  16           that "speaks" the ATA protocol, also called ATA controller),
  17           because you will be asked for it.
  18
  19           NOTE: ATA enables basic SCSI support; *however*,
  20           'SCSI disk support', 'SCSI tape support', or
  21           'SCSI CDROM support' may also be needed,
  22           depending on your hardware configuration.
  23
  24 if ATA
  25
  26 config ATA_NONSTANDARD
  27        bool
  28        default n
  29
  30 config ATA_ACPI
  31         bool
  32         depends on ACPI && PCI
  33         default y
  34         help
  35           This option adds support for ATA-related ACPI objects.
  36           These ACPI objects add the ability to retrieve taskfiles
  37           from the ACPI BIOS and write them to the disk controller.
  38           These objects may be related to performance, security,
  39           power management, or other areas.
  40           You can disable this at kernel boot time by using the
  41           option libata.noacpi=1
  42
  43 config SATA_AHCI
  44         tristate "AHCI SATA support"
  45         depends on PCI
  46         help
  47           This option enables support for AHCI Serial ATA.
  48
  49           If unsure, say N.
  50
  51 config SATA_SVW
  52         tristate "ServerWorks Frodo / Apple K2 SATA support"
  53         depends on PCI
  54         help
  55           This option enables support for Broadcom/Serverworks/Apple K2
  56           SATA support.
  57
  58           If unsure, say N.
  59
  60 config ATA_PIIX
  61         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
  62         depends on PCI
  63         help
  64           This option enables support for ICH5/6/7/8 Serial ATA
  65           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
  66           host controllers.
  67
  68           If unsure, say N.
  69
  70 config SATA_MV
  71         tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
  72         depends on PCI && EXPERIMENTAL
  73         help
  74           This option enables support for the Marvell Serial ATA family.
  75           Currently supports 88SX[56]0[48][01] chips.
  76
  77           If unsure, say N.
  78
  79 config SATA_NV
  80         tristate "NVIDIA SATA support"
  81         depends on PCI
  82         help
  83           This option enables support for NVIDIA Serial ATA.
  84
  85           If unsure, say N.
  86
  87 config PDC_ADMA
  88         tristate "Pacific Digital ADMA support"
  89         depends on PCI
  90         help
  91           This option enables support for Pacific Digital ADMA controllers
  92
  93           If unsure, say N.
  94
  95 config SATA_QSTOR
  96         tristate "Pacific Digital SATA QStor support"
  97         depends on PCI
  98         help
  99           This option enables support for Pacific Digital Serial ATA QStor.
 100
 101           If unsure, say N.
 102
 103 config SATA_PROMISE
 104         tristate "Promise SATA TX2/TX4 support"
 105         depends on PCI
 106         help
 107           This option enables support for Promise Serial ATA TX2/TX4.
 108
 109           If unsure, say N.
 110
 111 config SATA_SX4
 112         tristate "Promise SATA SX4 support"
 113         depends on PCI && EXPERIMENTAL
 114         help
 115           This option enables support for Promise Serial ATA SX4.
 116
 117           If unsure, say N.
 118
 119 config SATA_SIL
 120         tristate "Silicon Image SATA support"
 121         depends on PCI
 122         help
 123           This option enables support for Silicon Image Serial ATA.
 124
 125           If unsure, say N.
 126
 127 config SATA_SIL24
 128         tristate "Silicon Image 3124/3132 SATA support"
 129         depends on PCI
 130         help
 131           This option enables support for Silicon Image 3124/3132 Serial ATA.
 132
 133           If unsure, say N.
 134
 135 config SATA_SIS
 136         tristate "SiS 964/965/966/180 SATA support"
 137         depends on PCI
 138         select PATA_SIS
 139         help
 140           This option enables support for SiS Serial ATA on
 141           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 142           The PATA support for SiS 180 requires additionally to
 143           enable the PATA_SIS driver in the config.
 144           If unsure, say N.
 145
 146 config SATA_ULI
 147         tristate "ULi Electronics SATA support"
 148         depends on PCI
 149         help
 150           This option enables support for ULi Electronics SATA.
 151
 152           If unsure, say N.
 153
 154 config SATA_VIA
 155         tristate "VIA SATA support"
 156         depends on PCI
 157         help
 158           This option enables support for VIA Serial ATA.
 159
 160           If unsure, say N.
 161
 162 config SATA_VITESSE
 163         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 164         depends on PCI
 165         help
 166           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 167
 168           If unsure, say N.
 169
 170 config SATA_INIC162X
 171         tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)"
 172         depends on PCI && EXPERIMENTAL
 173         help
 174           This option enables support for Initio 162x Serial ATA.
 175
 176 config PATA_ACPI
 177         tristate "ACPI firmware driver for PATA"
 178         depends on ATA_ACPI
 179         help
 180           This option enables an ACPI method driver which drives
 181           motherboard PATA controller interfaces through the ACPI
 182           firmware in the BIOS. This driver can sometimes handle
 183           otherwise unsupported hardware.
 184
 185 config PATA_ALI
 186         tristate "ALi PATA support (Experimental)"
 187         depends on PCI && EXPERIMENTAL
 188         help
 189           This option enables support for the ALi ATA interfaces
 190           found on the many ALi chipsets.
 191
 192           If unsure, say N.
 193
 194 config PATA_AMD
 195         tristate "AMD/NVidia PATA support"
 196         depends on PCI
 197         help
 198           This option enables support for the AMD and NVidia PATA
 199           interfaces found on the chipsets for Athlon/Athlon64.
 200
 201           If unsure, say N.
 202
 203 config PATA_ARTOP
 204         tristate "ARTOP 6210/6260 PATA support"
 205         depends on PCI
 206         help
 207           This option enables support for ARTOP PATA controllers.
 208
 209           If unsure, say N.
 210
 211 config PATA_AT32
 212         tristate "Atmel AVR32 PATA support (Experimental)"
 213         depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
 214         help
 215           This option enables support for the IDE devices on the
 216           Atmel AT32AP platform.
 217
 218           If unsure, say N.
 219
 220 config PATA_ATIIXP
 221         tristate "ATI PATA support"
 222         depends on PCI
 223         help
 224           This option enables support for the ATI ATA interfaces
 225           found on the many ATI chipsets.
 226
 227           If unsure, say N.
 228
 229 config PATA_CMD640_PCI
 230         tristate "CMD640 PCI PATA support (Very Experimental)"
 231         depends on PCI && EXPERIMENTAL
 232         help
 233           This option enables support for the CMD640 PCI IDE
 234           interface chip. Only the primary channel is currently
 235           supported.
 236
 237           If unsure, say N.
 238
 239 config PATA_CMD64X
 240         tristate "CMD64x PATA support"
 241         depends on PCI
 242         help
 243           This option enables support for the CMD64x series chips
 244           except for the CMD640.
 245
 246           If unsure, say N.
 247
 248 config PATA_CS5520
 249         tristate "CS5510/5520 PATA support"
 250         depends on PCI
 251         help
 252           This option enables support for the Cyrix 5510/5520
 253           companion chip used with the MediaGX/Geode processor family.
 254
 255           If unsure, say N.
 256
 257 config PATA_CS5530
 258         tristate "CS5530 PATA support (Experimental)"
 259         depends on PCI && EXPERIMENTAL
 260         help
 261           This option enables support for the Cyrix/NatSemi/AMD CS5530
 262           companion chip used with the MediaGX/Geode processor family.
 263
 264           If unsure, say N.
 265
 266 config PATA_CS5535
 267         tristate "CS5535 PATA support (Experimental)"
 268         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 269         help
 270           This option enables support for the NatSemi/AMD CS5535
 271           companion chip used with the Geode processor family.
 272
 273           If unsure, say N.
 274
 275 config PATA_CS5536
 276         tristate "CS5536 PATA support (Experimental)"
 277         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 278         help
 279           This option enables support for the AMD CS5536
 280           companion chip used with the Geode LX processor family.
 281
 282           If unsure, say N.
 283
 284 config PATA_CYPRESS
 285         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 286         depends on PCI && EXPERIMENTAL
 287         help
 288           This option enables support for the Cypress/Contaq CY82C693
 289           chipset found in some Alpha systems
 290
 291           If unsure, say N.
 292
 293 config PATA_EFAR
 294         tristate "EFAR SLC90E66 support"
 295         depends on PCI
 296         help
 297           This option enables support for the EFAR SLC90E66
 298           IDE controller found on some older machines.
 299
 300           If unsure, say N.
 301
 302 config ATA_GENERIC
 303         tristate "Generic ATA support"
 304         depends on PCI
 305         help
 306           This option enables support for generic BIOS configured
 307           ATA controllers via the new ATA layer
 308
 309           If unsure, say N.
 310
 311 config PATA_HPT366
 312         tristate "HPT 366/368 PATA support"
 313         depends on PCI
 314         help
 315           This option enables support for the HPT 366 and 368
 316           PATA controllers via the new ATA layer.
 317
 318           If unsure, say N.
 319
 320 config PATA_HPT37X
 321         tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
 322         depends on PCI && EXPERIMENTAL
 323         help
 324           This option enables support for the majority of the later HPT
 325           PATA controllers via the new ATA layer.
 326
 327           If unsure, say N.
 328
 329 config PATA_HPT3X2N
 330         tristate "HPT 372N/302N PATA support (Very Experimental)"
 331         depends on PCI && EXPERIMENTAL
 332         help
 333           This option enables support for the N variant HPT PATA
 334           controllers via the new ATA layer
 335
 336           If unsure, say N.
 337
 338 config PATA_HPT3X3
 339         tristate "HPT 343/363 PATA support"
 340         depends on PCI
 341         help
 342           This option enables support for the HPT 343/363
 343           PATA controllers via the new ATA layer
 344
 345           If unsure, say N.
 346
 347 config PATA_HPT3X3_DMA
 348         bool "HPT 343/363 DMA support (Experimental)"
 349         depends on PATA_HPT3X3
 350         help
 351           This option enables DMA support for the HPT343/363
 352           controllers. Enable with care as there are still some
 353           problems with DMA on this chipset.
 354
 355 config PATA_ISAPNP
 356         tristate "ISA Plug and Play PATA support (Experimental)"
 357         depends on EXPERIMENTAL && ISAPNP
 358         help
 359           This option enables support for ISA plug & play ATA
 360           controllers such as those found on old soundcards.
 361
 362           If unsure, say N.
 363
 364 config PATA_IT821X
 365         tristate "IT8211/2 PATA support"
 366         depends on PCI
 367         help
 368           This option enables support for the ITE 8211 and 8212
 369           PATA controllers via the new ATA layer, including RAID
 370           mode.
 371
 372           If unsure, say N.
 373
 374 config PATA_IT8213
 375         tristate "IT8213 PATA support (Experimental)"
 376         depends on PCI && EXPERIMENTAL
 377         help
 378           This option enables support for the ITE 821 PATA
 379           controllers via the new ATA layer.
 380
 381           If unsure, say N.
 382
 383 config PATA_JMICRON
 384         tristate "JMicron PATA support"
 385         depends on PCI
 386         help
 387           Enable support for the JMicron IDE controller, via the new
 388           ATA layer.
 389
 390           If unsure, say N.
 391
 392 config PATA_LEGACY
 393         tristate "Legacy ISA PATA support (Experimental)"
 394         depends on ISA && EXPERIMENTAL
 395         help
 396           This option enables support for ISA/VLB bus legacy PATA
 397           ports and allows them to be accessed via the new ATA layer.
 398
 399           If unsure, say N.
 400
 401 config PATA_TRIFLEX
 402         tristate "Compaq Triflex PATA support"
 403         depends on PCI
 404         help
 405           Enable support for the Compaq 'Triflex' IDE controller as found
 406           on many Compaq Pentium-Pro systems, via the new ATA layer.
 407
 408           If unsure, say N.
 409
 410 config PATA_MARVELL
 411         tristate "Marvell PATA support via legacy mode"
 412         depends on PCI
 413         help
 414           This option enables limited support for the Marvell 88SE6145 ATA
 415           controller.
 416
 417           If unsure, say N.
 418
 419 config PATA_MPC52xx
 420         tristate "Freescale MPC52xx SoC internal IDE"
 421         depends on PPC_MPC52xx
 422         help
 423           This option enables support for integrated IDE controller
 424           of the Freescale MPC52xx SoC.
 425
 426           If unsure, say N.
 427
 428 config PATA_MPIIX
 429         tristate "Intel PATA MPIIX support"
 430         depends on PCI
 431         help
 432           This option enables support for MPIIX PATA support.
 433
 434           If unsure, say N.
 435
 436 config PATA_OLDPIIX
 437         tristate "Intel PATA old PIIX support"
 438         depends on PCI
 439         help
 440           This option enables support for early PIIX PATA support.
 441
 442           If unsure, say N.
 443
 444 config PATA_NETCELL
 445         tristate "NETCELL Revolution RAID support"
 446         depends on PCI
 447         help
 448           This option enables support for the Netcell Revolution RAID
 449           PATA controller.
 450
 451           If unsure, say N.
 452
 453 config PATA_NS87410
 454         tristate "Nat Semi NS87410 PATA support (Experimental)"
 455         depends on PCI && EXPERIMENTAL
 456         help
 457           This option enables support for the National Semiconductor
 458           NS87410 PCI-IDE controller.
 459
 460           If unsure, say N.
 461
 462 config PATA_NS87415
 463         tristate "Nat Semi NS87415 PATA support (Experimental)"
 464         depends on PCI && EXPERIMENTAL
 465         help
 466           This option enables support for the National Semiconductor
 467           NS87415 PCI-IDE controller.
 468
 469           If unsure, say N.
 470
 471 config PATA_OPTI
 472         tristate "OPTI621/6215 PATA support (Very Experimental)"
 473         depends on PCI && EXPERIMENTAL
 474         help
 475           This option enables full PIO support for the early Opti ATA
 476           controllers found on some old motherboards.
 477
 478           If unsure, say N.
 479
 480 config PATA_OPTIDMA
 481         tristate "OPTI FireStar PATA support (Very Experimental)"
 482         depends on PCI && EXPERIMENTAL
 483         help
 484           This option enables DMA/PIO support for the later OPTi
 485           controllers found on some old motherboards and in some
 486           laptops.
 487
 488           If unsure, say N.
 489
 490 config PATA_PCMCIA
 491         tristate "PCMCIA PATA support"
 492         depends on PCMCIA
 493         help
 494           This option enables support for PCMCIA ATA interfaces, including
 495           compact flash card adapters via the new ATA layer.
 496
 497           If unsure, say N.
 498
 499 config PATA_PDC_OLD
 500         tristate "Older Promise PATA controller support (Experimental)"
 501         depends on PCI && EXPERIMENTAL
 502         help
 503           This option enables support for the Promise 20246, 20262, 20263,
 504           20265 and 20267 adapters.
 505
 506           If unsure, say N.
 507
 508 config PATA_QDI
 509         tristate "QDI VLB PATA support"
 510         depends on ISA
 511         help
 512           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 513
 514 config PATA_RADISYS
 515         tristate "RADISYS 82600 PATA support (Very Experimental)"
 516         depends on PCI && EXPERIMENTAL
 517         help
 518           This option enables support for the RADISYS 82600
 519           PATA controllers via the new ATA layer
 520
 521           If unsure, say N.
 522
 523 config PATA_RZ1000
 524         tristate "PC Tech RZ1000 PATA support"
 525         depends on PCI
 526         help
 527           This option enables basic support for the PC Tech RZ1000/1
 528           PATA controllers via the new ATA layer
 529
 530           If unsure, say N.
 531
 532 config PATA_SC1200
 533         tristate "SC1200 PATA support (Very Experimental)"
 534         depends on PCI && EXPERIMENTAL
 535         help
 536           This option enables support for the NatSemi/AMD SC1200 SoC
 537           companion chip used with the Geode processor family.
 538
 539           If unsure, say N.
 540
 541 config PATA_SERVERWORKS
 542         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 543         depends on PCI
 544         help
 545           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 546           HT1000 PATA controllers, via the new ATA layer.
 547
 548           If unsure, say N.
 549
 550 config PATA_PDC2027X
 551         tristate "Promise PATA 2027x support"
 552         depends on PCI
 553         help
 554           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 555
 556           If unsure, say N.
 557
 558 config PATA_SIL680
 559         tristate "CMD / Silicon Image 680 PATA support"
 560         depends on PCI
 561         help
 562           This option enables support for CMD / Silicon Image 680 PATA.
 563
 564           If unsure, say N.
 565
 566 config PATA_SIS
 567         tristate "SiS PATA support (Experimental)"
 568         depends on PCI && EXPERIMENTAL
 569         help
 570           This option enables support for SiS PATA controllers
 571
 572           If unsure, say N.
 573
 574 config PATA_VIA
 575         tristate "VIA PATA support"
 576         depends on PCI
 577         help
 578           This option enables support for the VIA PATA interfaces
 579           found on the many VIA chipsets.
 580
 581           If unsure, say N.
 582
 583 config PATA_WINBOND
 584         tristate "Winbond SL82C105 PATA support"
 585         depends on PCI
 586         help
 587           This option enables support for SL82C105 PATA devices found in the
 588           Netwinder and some other systems
 589
 590           If unsure, say N.
 591
 592 config PATA_WINBOND_VLB
 593         tristate "Winbond W83759A VLB PATA support (Experimental)"
 594         depends on ISA && EXPERIMENTAL
 595         help
 596           Support for the Winbond W83759A controller on Vesa Local Bus
 597           systems.
 598
 599 config PATA_PLATFORM
 600         tristate "Generic platform device PATA support"
 601         depends on EMBEDDED || ARCH_RPC
 602         help
 603           This option enables support for generic directly connected ATA
 604           devices commonly found on embedded systems.
 605
 606           If unsure, say N.
 607
 608 config PATA_ICSIDE
 609         tristate "Acorn ICS PATA support"
 610         depends on ARM && ARCH_ACORN
 611         help
 612           On Acorn systems, say Y here if you wish to use the ICS PATA
 613           interface card.  This is not required for ICS partition support.
 614           If you are unsure, say N to this.
 615
 616 config PATA_IXP4XX_CF
 617         tristate "IXP4XX Compact Flash support"
 618         depends on ARCH_IXP4XX
 619         help
 620           This option enables support for a Compact Flash connected on
 621           the ixp4xx expansion bus. This driver had been written for
 622           Loft/Avila boards in mind but can work with others.
 623
 624           If unsure, say N.
 625
 626 config PATA_SCC
 627         tristate "Toshiba's Cell Reference Set IDE support"
 628         depends on PCI && PPC_CELLEB
 629         help
 630           This option enables support for the built-in IDE controller on
 631           Toshiba Cell Reference Board.
 632
 633           If unsure, say N.
 634
 635 config PATA_BF54X
 636         tristate "Blackfin 54x ATAPI support"
 637         depends on BF542 || BF548 || BF549
 638         help
 639           This option enables support for the built-in ATAPI controller on
 640           Blackfin 54x family chips.
 641
 642           If unsure, say N.
 643
 644 config PATA_BF54X_DMA
 645         bool "DMA mode"
 646         depends on PATA_BF54X
 647         default y
 648         help
 649           Enable DMA mode for Blackfin ATAPI controller.
 650
 651 endif # ATA