drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K) || BROKEN
  18         select SCSI
  19         ---help---
  20           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  21           any other ATA device under Linux, say Y and make sure that you know
  22           the name of your ATA host adapter (the card inside your computer
  23           that "speaks" the ATA protocol, also called ATA controller),
  24           because you will be asked for it.
  25
  26           NOTE: ATA enables basic SCSI support; *however*,
  27           'SCSI disk support', 'SCSI tape support', or
  28           'SCSI CDROM support' may also be needed,
  29           depending on your hardware configuration.
  30
  31 if ATA
  32
  33 config ATA_NONSTANDARD
  34        bool
  35        default n
  36
  37 config ATA_VERBOSE_ERROR
  38         bool "Verbose ATA error reporting"
  39         default y
  40         help
  41           This option adds parsing of ATA command descriptions and error bits
  42           in libata kernel output, making it easier to interpret.
  43           This option will enlarge the kernel by approx. 6KB. Disable it only
  44           if kernel size is more important than ease of debugging.
  45
  46           If unsure, say Y.
  47
  48 config ATA_ACPI
  49         bool "ATA ACPI Support"
  50         depends on ACPI && PCI
  51         default y
  52         help
  53           This option adds support for ATA-related ACPI objects.
  54           These ACPI objects add the ability to retrieve taskfiles
  55           from the ACPI BIOS and write them to the disk controller.
  56           These objects may be related to performance, security,
  57           power management, or other areas.
  58           You can disable this at kernel boot time by using the
  59           option libata.noacpi=1
  60
  61 config SATA_PMP
  62         bool "SATA Port Multiplier support"
  63         default y
  64         help
  65           This option adds support for SATA Port Multipliers
  66           (the SATA version of an ethernet hub, or SAS expander).
  67
  68 comment "Controllers with non-SFF native interface"
  69
  70 config SATA_AHCI
  71         tristate "AHCI SATA support"
  72         depends on PCI
  73         help
  74           This option enables support for AHCI Serial ATA.
  75
  76           If unsure, say N.
  77
  78 config SATA_AHCI_PLATFORM
  79         tristate "Platform AHCI SATA support"
  80         help
  81           This option enables support for Platform AHCI Serial ATA
  82           controllers.
  83
  84           If unsure, say N.
  85
  86 config SATA_FSL
  87         tristate "Freescale 3.0Gbps SATA support"
  88         depends on FSL_SOC
  89         help
  90           This option enables support for Freescale 3.0Gbps SATA controller.
  91           It can be found on MPC837x and MPC8315.
  92
  93           If unsure, say N.
  94
  95 config SATA_INIC162X
  96         tristate "Initio 162x SATA support"
  97         depends on PCI
  98         help
  99           This option enables support for Initio 162x Serial ATA.
 100
 101 config SATA_ACARD_AHCI
 102         tristate "ACard AHCI variant (ATP 8620)"
 103         depends on PCI
 104         help
 105           This option enables support for Acard.
 106
 107           If unsure, say N.
 108
 109 config SATA_SIL24
 110         tristate "Silicon Image 3124/3132 SATA support"
 111         depends on PCI
 112         help
 113           This option enables support for Silicon Image 3124/3132 Serial ATA.
 114
 115           If unsure, say N.
 116
 117 config ATA_SFF
 118         bool "ATA SFF support"
 119         default y
 120         help
 121           This option adds support for ATA controllers with SFF
 122           compliant or similar programming interface.
 123
 124           SFF is the legacy IDE interface that has been around since
 125           the dawn of time.  Almost all PATA controllers have an
 126           SFF interface.  Many SATA controllers have an SFF interface
 127           when configured into a legacy compatibility mode.
 128
 129           For users with exclusively modern controllers like AHCI,
 130           Silicon Image 3124, or Marvell 6440, you may choose to
 131           disable this unneeded SFF support.
 132
 133           If unsure, say Y.
 134
 135 if ATA_SFF
 136
 137 comment "SFF controllers with custom DMA interface"
 138
 139 config PDC_ADMA
 140         tristate "Pacific Digital ADMA support"
 141         depends on PCI
 142         help
 143           This option enables support for Pacific Digital ADMA controllers
 144
 145           If unsure, say N.
 146
 147 config PATA_OCTEON_CF
 148         tristate "OCTEON Boot Bus Compact Flash support"
 149         depends on CPU_CAVIUM_OCTEON
 150         help
 151           This option enables a polled compact flash driver for use with
 152           compact flash cards attached to the OCTEON boot bus.
 153
 154           If unsure, say N.
 155
 156 config SATA_QSTOR
 157         tristate "Pacific Digital SATA QStor support"
 158         depends on PCI
 159         help
 160           This option enables support for Pacific Digital Serial ATA QStor.
 161
 162           If unsure, say N.
 163
 164 config SATA_SX4
 165         tristate "Promise SATA SX4 support (Experimental)"
 166         depends on PCI && EXPERIMENTAL
 167         help
 168           This option enables support for Promise Serial ATA SX4.
 169
 170           If unsure, say N.
 171
 172 config ATA_BMDMA
 173         bool "ATA BMDMA support"
 174         default y
 175         help
 176           This option adds support for SFF ATA controllers with BMDMA
 177           capability.  BMDMA stands for bus-master DMA and is the
 178           de facto DMA interface for SFF controllers.
 179
 180           If unsure, say Y.
 181
 182 if ATA_BMDMA
 183
 184 comment "SATA SFF controllers with BMDMA"
 185
 186 config ATA_PIIX
 187         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 188         depends on PCI
 189         help
 190           This option enables support for ICH5/6/7/8 Serial ATA
 191           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 192           host controllers.
 193
 194           If unsure, say N.
 195
 196 config SATA_DWC
 197         tristate "DesignWare Cores SATA support"
 198         depends on 460EX
 199         help
 200           This option enables support for the on-chip SATA controller of the
 201           AppliedMicro processor 460EX.
 202
 203           If unsure, say N.
 204
 205 config SATA_DWC_DEBUG
 206         bool "Debugging driver version"
 207         depends on SATA_DWC
 208         help
 209           This option enables debugging output in the driver.
 210
 211 config SATA_DWC_VDEBUG
 212         bool "Verbose debug output"
 213         depends on SATA_DWC_DEBUG
 214         help
 215           This option enables the taskfile dumping and NCQ debugging.
 216
 217 config SATA_MV
 218         tristate "Marvell SATA support"
 219         help
 220           This option enables support for the Marvell Serial ATA family.
 221           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 222           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 223
 224           If unsure, say N.
 225
 226 config SATA_NV
 227         tristate "NVIDIA SATA support"
 228         depends on PCI
 229         help
 230           This option enables support for NVIDIA Serial ATA.
 231
 232           If unsure, say N.
 233
 234 config SATA_PROMISE
 235         tristate "Promise SATA TX2/TX4 support"
 236         depends on PCI
 237         help
 238           This option enables support for Promise Serial ATA TX2/TX4.
 239
 240           If unsure, say N.
 241
 242 config SATA_SIL
 243         tristate "Silicon Image SATA support"
 244         depends on PCI
 245         help
 246           This option enables support for Silicon Image Serial ATA.
 247
 248           If unsure, say N.
 249
 250 config SATA_SIS
 251         tristate "SiS 964/965/966/180 SATA support"
 252         depends on PCI
 253         select PATA_SIS
 254         help
 255           This option enables support for SiS Serial ATA on
 256           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 257           The PATA support for SiS 180 requires additionally to
 258           enable the PATA_SIS driver in the config.
 259           If unsure, say N.
 260
 261 config SATA_SVW
 262         tristate "ServerWorks Frodo / Apple K2 SATA support"
 263         depends on PCI
 264         help
 265           This option enables support for Broadcom/Serverworks/Apple K2
 266           SATA support.
 267
 268           If unsure, say N.
 269
 270 config SATA_ULI
 271         tristate "ULi Electronics SATA support"
 272         depends on PCI
 273         help
 274           This option enables support for ULi Electronics SATA.
 275
 276           If unsure, say N.
 277
 278 config SATA_VIA
 279         tristate "VIA SATA support"
 280         depends on PCI
 281         help
 282           This option enables support for VIA Serial ATA.
 283
 284           If unsure, say N.
 285
 286 config SATA_VITESSE
 287         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 288         depends on PCI
 289         help
 290           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 291
 292           If unsure, say N.
 293
 294 comment "PATA SFF controllers with BMDMA"
 295
 296 config PATA_ALI
 297         tristate "ALi PATA support"
 298         depends on PCI
 299         help
 300           This option enables support for the ALi ATA interfaces
 301           found on the many ALi chipsets.
 302
 303           If unsure, say N.
 304
 305 config PATA_AMD
 306         tristate "AMD/NVidia PATA support"
 307         depends on PCI
 308         help
 309           This option enables support for the AMD and NVidia PATA
 310           interfaces found on the chipsets for Athlon/Athlon64.
 311
 312           If unsure, say N.
 313
 314 config PATA_ARASAN_CF
 315         tristate "ARASAN CompactFlash PATA Controller Support"
 316         select DMA_ENGINE
 317         help
 318           Say Y here to support the ARASAN CompactFlash PATA controller
 319
 320 config PATA_ARTOP
 321         tristate "ARTOP 6210/6260 PATA support"
 322         depends on PCI
 323         help
 324           This option enables support for ARTOP PATA controllers.
 325
 326           If unsure, say N.
 327
 328 config PATA_ATIIXP
 329         tristate "ATI PATA support"
 330         depends on PCI
 331         help
 332           This option enables support for the ATI ATA interfaces
 333           found on the many ATI chipsets.
 334
 335           If unsure, say N.
 336
 337 config PATA_ATP867X
 338         tristate "ARTOP/Acard ATP867X PATA support"
 339         depends on PCI
 340         help
 341           This option enables support for ARTOP/Acard ATP867X PATA
 342           controllers.
 343
 344           If unsure, say N.
 345
 346 config PATA_BF54X
 347         tristate "Blackfin 54x ATAPI support"
 348         depends on BF542 || BF548 || BF549
 349         help
 350           This option enables support for the built-in ATAPI controller on
 351           Blackfin 54x family chips.
 352
 353           If unsure, say N.
 354
 355 config PATA_CMD64X
 356         tristate "CMD64x PATA support"
 357         depends on PCI
 358         help
 359           This option enables support for the CMD64x series chips
 360           except for the CMD640.
 361
 362           If unsure, say N.
 363
 364 config PATA_CS5520
 365         tristate "CS5510/5520 PATA support"
 366         depends on PCI
 367         help
 368           This option enables support for the Cyrix 5510/5520
 369           companion chip used with the MediaGX/Geode processor family.
 370
 371           If unsure, say N.
 372
 373 config PATA_CS5530
 374         tristate "CS5530 PATA support"
 375         depends on PCI
 376         help
 377           This option enables support for the Cyrix/NatSemi/AMD CS5530
 378           companion chip used with the MediaGX/Geode processor family.
 379
 380           If unsure, say N.
 381
 382 config PATA_CS5535
 383         tristate "CS5535 PATA support (Experimental)"
 384         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 385         help
 386           This option enables support for the NatSemi/AMD CS5535
 387           companion chip used with the Geode processor family.
 388
 389           If unsure, say N.
 390
 391 config PATA_CS5536
 392         tristate "CS5536 PATA support"
 393         depends on PCI
 394         help
 395           This option enables support for the AMD CS5536
 396           companion chip used with the Geode LX processor family.
 397
 398           If unsure, say N.
 399
 400 config PATA_CYPRESS
 401         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 402         depends on PCI && EXPERIMENTAL
 403         help
 404           This option enables support for the Cypress/Contaq CY82C693
 405           chipset found in some Alpha systems
 406
 407           If unsure, say N.
 408
 409 config PATA_EFAR
 410         tristate "EFAR SLC90E66 support"
 411         depends on PCI
 412         help
 413           This option enables support for the EFAR SLC90E66
 414           IDE controller found on some older machines.
 415
 416           If unsure, say N.
 417
 418 config PATA_HPT366
 419         tristate "HPT 366/368 PATA support"
 420         depends on PCI
 421         help
 422           This option enables support for the HPT 366 and 368
 423           PATA controllers via the new ATA layer.
 424
 425           If unsure, say N.
 426
 427 config PATA_HPT37X
 428         tristate "HPT 370/370A/371/372/374/302 PATA support"
 429         depends on PCI
 430         help
 431           This option enables support for the majority of the later HPT
 432           PATA controllers via the new ATA layer.
 433
 434           If unsure, say N.
 435
 436 config PATA_HPT3X2N
 437         tristate "HPT 371N/372N/302N PATA support"
 438         depends on PCI
 439         help
 440           This option enables support for the N variant HPT PATA
 441           controllers via the new ATA layer.
 442
 443           If unsure, say N.
 444
 445 config PATA_HPT3X3
 446         tristate "HPT 343/363 PATA support"
 447         depends on PCI
 448         help
 449           This option enables support for the HPT 343/363
 450           PATA controllers via the new ATA layer
 451
 452           If unsure, say N.
 453
 454 config PATA_HPT3X3_DMA
 455         bool "HPT 343/363 DMA support"
 456         depends on PATA_HPT3X3
 457         help
 458           This option enables DMA support for the HPT343/363
 459           controllers. Enable with care as there are still some
 460           problems with DMA on this chipset.
 461
 462 config PATA_ICSIDE
 463         tristate "Acorn ICS PATA support"
 464         depends on ARM && ARCH_ACORN
 465         help
 466           On Acorn systems, say Y here if you wish to use the ICS PATA
 467           interface card.  This is not required for ICS partition support.
 468           If you are unsure, say N to this.
 469
 470 config PATA_IT8213
 471         tristate "IT8213 PATA support (Experimental)"
 472         depends on PCI && EXPERIMENTAL
 473         help
 474           This option enables support for the ITE 821 PATA
 475           controllers via the new ATA layer.
 476
 477           If unsure, say N.
 478
 479 config PATA_IT821X
 480         tristate "IT8211/2 PATA support"
 481         depends on PCI
 482         help
 483           This option enables support for the ITE 8211 and 8212
 484           PATA controllers via the new ATA layer, including RAID
 485           mode.
 486
 487           If unsure, say N.
 488
 489 config PATA_JMICRON
 490         tristate "JMicron PATA support"
 491         depends on PCI
 492         help
 493           Enable support for the JMicron IDE controller, via the new
 494           ATA layer.
 495
 496           If unsure, say N.
 497
 498 config PATA_MACIO
 499         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 500         depends on PPC_PMAC
 501         help
 502           Most IDE capable PowerMacs have IDE busses driven by a variant
 503           of this controller which is part of the Apple chipset used on
 504           most PowerMac models. Some models have multiple busses using
 505           different chipsets, though generally, MacIO is one of them.
 506
 507 config PATA_MARVELL
 508         tristate "Marvell PATA support via legacy mode"
 509         depends on PCI
 510         help
 511           This option enables limited support for the Marvell 88SE61xx ATA
 512           controllers. If you wish to use only the SATA ports then select
 513           the AHCI driver alone. If you wish to the use the PATA port or
 514           both SATA and PATA include this driver.
 515
 516           If unsure, say N.
 517
 518 config PATA_MPC52xx
 519         tristate "Freescale MPC52xx SoC internal IDE"
 520         depends on PPC_MPC52xx && PPC_BESTCOMM
 521         select PPC_BESTCOMM_ATA
 522         help
 523           This option enables support for integrated IDE controller
 524           of the Freescale MPC52xx SoC.
 525
 526           If unsure, say N.
 527
 528 config PATA_NETCELL
 529         tristate "NETCELL Revolution RAID support"
 530         depends on PCI
 531         help
 532           This option enables support for the Netcell Revolution RAID
 533           PATA controller.
 534
 535           If unsure, say N.
 536
 537 config PATA_NINJA32
 538         tristate "Ninja32/Delkin Cardbus ATA support"
 539         depends on PCI
 540         help
 541           This option enables support for the Ninja32, Delkin and
 542           possibly other brands of Cardbus ATA adapter
 543
 544           If unsure, say N.
 545
 546 config PATA_NS87415
 547         tristate "Nat Semi NS87415 PATA support"
 548         depends on PCI
 549         help
 550           This option enables support for the National Semiconductor
 551           NS87415 PCI-IDE controller.
 552
 553           If unsure, say N.
 554
 555 config PATA_OLDPIIX
 556         tristate "Intel PATA old PIIX support"
 557         depends on PCI
 558         help
 559           This option enables support for early PIIX PATA support.
 560
 561           If unsure, say N.
 562
 563 config PATA_OPTIDMA
 564         tristate "OPTI FireStar PATA support (Very Experimental)"
 565         depends on PCI && EXPERIMENTAL
 566         help
 567           This option enables DMA/PIO support for the later OPTi
 568           controllers found on some old motherboards and in some
 569           laptops.
 570
 571           If unsure, say N.
 572
 573 config PATA_PDC2027X
 574         tristate "Promise PATA 2027x support"
 575         depends on PCI
 576         help
 577           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 578
 579           If unsure, say N.
 580
 581 config PATA_PDC_OLD
 582         tristate "Older Promise PATA controller support"
 583         depends on PCI
 584         help
 585           This option enables support for the Promise 20246, 20262, 20263,
 586           20265 and 20267 adapters.
 587
 588           If unsure, say N.
 589
 590 config PATA_RADISYS
 591         tristate "RADISYS 82600 PATA support (Experimental)"
 592         depends on PCI && EXPERIMENTAL
 593         help
 594           This option enables support for the RADISYS 82600
 595           PATA controllers via the new ATA layer
 596
 597           If unsure, say N.
 598
 599 config PATA_RDC
 600         tristate "RDC PATA support"
 601         depends on PCI
 602         help
 603           This option enables basic support for the later RDC PATA controllers
 604           controllers via the new ATA layer. For the RDC 1010, you need to
 605           enable the IT821X driver instead.
 606
 607           If unsure, say N.
 608
 609 config PATA_SC1200
 610         tristate "SC1200 PATA support"
 611         depends on PCI
 612         help
 613           This option enables support for the NatSemi/AMD SC1200 SoC
 614           companion chip used with the Geode processor family.
 615
 616           If unsure, say N.
 617
 618 config PATA_SCC
 619         tristate "Toshiba's Cell Reference Set IDE support"
 620         depends on PCI && PPC_CELLEB
 621         help
 622           This option enables support for the built-in IDE controller on
 623           Toshiba Cell Reference Board.
 624
 625           If unsure, say N.
 626
 627 config PATA_SCH
 628         tristate "Intel SCH PATA support"
 629         depends on PCI
 630         help
 631           This option enables support for Intel SCH PATA on the Intel
 632           SCH (US15W, US15L, UL11L) series host controllers.
 633
 634           If unsure, say N.
 635
 636 config PATA_SERVERWORKS
 637         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 638         depends on PCI
 639         help
 640           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 641           HT1000 PATA controllers, via the new ATA layer.
 642
 643           If unsure, say N.
 644
 645 config PATA_SIL680
 646         tristate "CMD / Silicon Image 680 PATA support"
 647         depends on PCI
 648         help
 649           This option enables support for CMD / Silicon Image 680 PATA.
 650
 651           If unsure, say N.
 652
 653 config PATA_SIS
 654         tristate "SiS PATA support"
 655         depends on PCI
 656         help
 657           This option enables support for SiS PATA controllers
 658
 659           If unsure, say N.
 660
 661 config PATA_TOSHIBA
 662         tristate "Toshiba Piccolo support (Experimental)"
 663         depends on PCI && EXPERIMENTAL
 664         help
 665           Support for the Toshiba Piccolo controllers. Currently only the
 666           primary channel is supported by this driver.
 667
 668           If unsure, say N.
 669
 670 config PATA_TRIFLEX
 671         tristate "Compaq Triflex PATA support"
 672         depends on PCI
 673         help
 674           Enable support for the Compaq 'Triflex' IDE controller as found
 675           on many Compaq Pentium-Pro systems, via the new ATA layer.
 676
 677           If unsure, say N.
 678
 679 config PATA_VIA
 680         tristate "VIA PATA support"
 681         depends on PCI
 682         help
 683           This option enables support for the VIA PATA interfaces
 684           found on the many VIA chipsets.
 685
 686           If unsure, say N.
 687
 688 config PATA_PXA
 689         tristate "PXA DMA-capable PATA support"
 690         depends on ARCH_PXA
 691         help
 692           This option enables support for harddrive attached to PXA CPU's bus.
 693
 694           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 695                 is not capable of doing MWDMA, use pata_platform instead.
 696
 697           If unsure, say N.
 698
 699 config PATA_WINBOND
 700         tristate "Winbond SL82C105 PATA support"
 701         depends on PCI
 702         help
 703           This option enables support for SL82C105 PATA devices found in the
 704           Netwinder and some other systems
 705
 706           If unsure, say N.
 707
 708 endif # ATA_BMDMA
 709
 710 comment "PIO-only SFF controllers"
 711
 712 config PATA_AT32
 713         tristate "Atmel AVR32 PATA support (Experimental)"
 714         depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
 715         help
 716           This option enables support for the IDE devices on the
 717           Atmel AT32AP platform.
 718
 719           If unsure, say N.
 720
 721 config PATA_AT91
 722         tristate "PATA support for AT91SAM9260"
 723         depends on ARM && ARCH_AT91
 724         help
 725           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 726
 727           If unsure, say N.
 728
 729 config PATA_CMD640_PCI
 730         tristate "CMD640 PCI PATA support (Experimental)"
 731         depends on PCI && EXPERIMENTAL
 732         help
 733           This option enables support for the CMD640 PCI IDE
 734           interface chip. Only the primary channel is currently
 735           supported.
 736
 737           If unsure, say N.
 738
 739 config PATA_ISAPNP
 740         tristate "ISA Plug and Play PATA support"
 741         depends on ISAPNP
 742         help
 743           This option enables support for ISA plug & play ATA
 744           controllers such as those found on old soundcards.
 745
 746           If unsure, say N.
 747
 748 config PATA_IXP4XX_CF
 749         tristate "IXP4XX Compact Flash support"
 750         depends on ARCH_IXP4XX
 751         help
 752           This option enables support for a Compact Flash connected on
 753           the ixp4xx expansion bus. This driver had been written for
 754           Loft/Avila boards in mind but can work with others.
 755
 756           If unsure, say N.
 757
 758 config PATA_MPIIX
 759         tristate "Intel PATA MPIIX support"
 760         depends on PCI
 761         help
 762           This option enables support for MPIIX PATA support.
 763
 764           If unsure, say N.
 765
 766 config PATA_NS87410
 767         tristate "Nat Semi NS87410 PATA support"
 768         depends on PCI
 769         help
 770           This option enables support for the National Semiconductor
 771           NS87410 PCI-IDE controller.
 772
 773           If unsure, say N.
 774
 775 config PATA_OPTI
 776         tristate "OPTI621/6215 PATA support (Very Experimental)"
 777         depends on PCI && EXPERIMENTAL
 778         help
 779           This option enables full PIO support for the early Opti ATA
 780           controllers found on some old motherboards.
 781
 782           If unsure, say N.
 783
 784 config PATA_PALMLD
 785         tristate "Palm LifeDrive PATA support"
 786         depends on MACH_PALMLD
 787         help
 788           This option enables support for Palm LifeDrive's internal ATA
 789           port via the new ATA layer.
 790
 791           If unsure, say N.
 792
 793 config PATA_PCMCIA
 794         tristate "PCMCIA PATA support"
 795         depends on PCMCIA
 796         help
 797           This option enables support for PCMCIA ATA interfaces, including
 798           compact flash card adapters via the new ATA layer.
 799
 800           If unsure, say N.
 801
 802 config PATA_PLATFORM
 803         tristate "Generic platform device PATA support"
 804         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 805         help
 806           This option enables support for generic directly connected ATA
 807           devices commonly found on embedded systems.
 808
 809           If unsure, say N.
 810
 811 config PATA_OF_PLATFORM
 812         tristate "OpenFirmware platform device PATA support"
 813         depends on PATA_PLATFORM && PPC_OF
 814         help
 815           This option enables support for generic directly connected ATA
 816           devices commonly found on embedded systems with OpenFirmware
 817           bindings.
 818
 819           If unsure, say N.
 820
 821 config PATA_QDI
 822         tristate "QDI VLB PATA support"
 823         depends on ISA
 824         help
 825           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 826
 827 config PATA_RB532
 828         tristate "RouterBoard 532 PATA CompactFlash support"
 829         depends on MIKROTIK_RB532
 830         help
 831           This option enables support for the RouterBoard 532
 832           PATA CompactFlash controller.
 833
 834           If unsure, say N.
 835
 836 config PATA_RZ1000
 837         tristate "PC Tech RZ1000 PATA support"
 838         depends on PCI
 839         help
 840           This option enables basic support for the PC Tech RZ1000/1
 841           PATA controllers via the new ATA layer
 842
 843           If unsure, say N.
 844
 845 config PATA_SAMSUNG_CF
 846         tristate "Samsung SoC PATA support"
 847         depends on SAMSUNG_DEV_IDE
 848         help
 849           This option enables basic support for Samsung's S3C/S5P board
 850           PATA controllers via the new ATA layer
 851
 852           If unsure, say N.
 853
 854 config PATA_WINBOND_VLB
 855         tristate "Winbond W83759A VLB PATA support (Experimental)"
 856         depends on ISA && EXPERIMENTAL
 857         select PATA_LEGACY
 858         help
 859           Support for the Winbond W83759A controller on Vesa Local Bus
 860           systems.
 861
 862 comment "Generic fallback / legacy drivers"
 863
 864 config PATA_ACPI
 865         tristate "ACPI firmware driver for PATA"
 866         depends on ATA_ACPI && ATA_BMDMA
 867         help
 868           This option enables an ACPI method driver which drives
 869           motherboard PATA controller interfaces through the ACPI
 870           firmware in the BIOS. This driver can sometimes handle
 871           otherwise unsupported hardware.
 872
 873 config ATA_GENERIC
 874         tristate "Generic ATA support"
 875         depends on PCI && ATA_BMDMA
 876         help
 877           This option enables support for generic BIOS configured
 878           ATA controllers via the new ATA layer
 879
 880           If unsure, say N.
 881
 882 config PATA_LEGACY
 883         tristate "Legacy ISA PATA support (Experimental)"
 884         depends on (ISA || PCI) && EXPERIMENTAL
 885         help
 886           This option enables support for ISA/VLB/PCI bus legacy PATA
 887           ports and allows them to be accessed via the new ATA layer.
 888
 889           If unsure, say N.
 890
 891 endif # ATA_SFF
 892 endif # ATA