drivers/block/paride/Kconfig

   1 #
   2 # PARIDE configuration
   3 #
   4 # PARIDE doesn't need PARPORT, but if PARPORT is configured as a module,
   5 # PARIDE must also be a module.  The bogus CONFIG_PARIDE_PARPORT option
   6 # controls the choices given to the user ...
   7 # PARIDE only supports PC style parports. Tough for USB or other parports...
   8 config PARIDE_PARPORT
   9         tristate
  10         depends on PARIDE!=n
  11         default m if PARPORT_PC=m
  12         default y if PARPORT_PC!=m
  13
  14 comment "Parallel IDE high-level drivers"
  15         depends on PARIDE
  16
  17 config PARIDE_PD
  18         tristate "Parallel port IDE disks"
  19         depends on PARIDE
  20         help
  21           This option enables the high-level driver for IDE-type disk devices
  22           connected through a parallel port. If you chose to build PARIDE
  23           support into your kernel, you may answer Y here to build in the
  24           parallel port IDE driver, otherwise you should answer M to build
  25           it as a loadable module. The module will be called pd. You
  26           must also have at least one parallel port protocol driver in your
  27           system. Among the devices supported by this driver are the SyQuest
  28           EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack
  29           hard drives from MicroSolutions.
  30
  31 config PARIDE_PCD
  32         tristate "Parallel port ATAPI CD-ROMs"
  33         depends on PARIDE
  34         ---help---
  35           This option enables the high-level driver for ATAPI CD-ROM devices
  36           connected through a parallel port. If you chose to build PARIDE
  37           support into your kernel, you may answer Y here to build in the
  38           parallel port ATAPI CD-ROM driver, otherwise you should answer M to
  39           build it as a loadable module. The module will be called pcd. You
  40           must also have at least one parallel port protocol driver in your
  41           system. Among the devices supported by this driver are the
  42           MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If
  43           you have such a CD-ROM drive, you should also say Y or M to "ISO
  44           9660 CD-ROM file system support" below, because that's the file
  45           system used on CD-ROMs.
  46
  47 config PARIDE_PF
  48         tristate "Parallel port ATAPI disks"
  49         depends on PARIDE
  50         help
  51           This option enables the high-level driver for ATAPI disk devices
  52           connected through a parallel port. If you chose to build PARIDE
  53           support into your kernel, you may answer Y here to build in the
  54           parallel port ATAPI disk driver, otherwise you should answer M
  55           to build it as a loadable module. The module will be called pf.
  56           You must also have at least one parallel port protocol driver in
  57           your system. Among the devices supported by this driver are the
  58           MicroSolutions backpack PD/CD drive and the Imation Superdisk
  59           LS-120 drive.
  60
  61 config PARIDE_PT
  62         tristate "Parallel port ATAPI tapes"
  63         depends on PARIDE
  64         help
  65           This option enables the high-level driver for ATAPI tape devices
  66           connected through a parallel port. If you chose to build PARIDE
  67           support into your kernel, you may answer Y here to build in the
  68           parallel port ATAPI disk driver, otherwise you should answer M
  69           to build it as a loadable module. The module will be called pt.
  70           You must also have at least one parallel port protocol driver in
  71           your system. Among the devices supported by this driver is the
  72           parallel port version of the HP 5GB drive.
  73
  74 config PARIDE_PG
  75         tristate "Parallel port generic ATAPI devices"
  76         depends on PARIDE
  77         ---help---
  78           This option enables a special high-level driver for generic ATAPI
  79           devices connected through a parallel port. The driver allows user
  80           programs, such as cdrtools, to send ATAPI commands directly to a
  81           device.
  82
  83           If you chose to build PARIDE support into your kernel, you may
  84           answer Y here to build in the parallel port generic ATAPI driver,
  85           otherwise you should answer M to build it as a loadable module. The
  86           module will be called pg.
  87
  88           You must also have at least one parallel port protocol driver in
  89           your system.
  90
  91           This driver implements an API loosely related to the generic SCSI
  92           driver. See <file:include/linux/pg.h>. for details.
  93
  94           You can obtain the most recent version of cdrtools from
  95           <ftp://ftp.berlios.de/pub/cdrecord/>. Versions 1.6.1a3 and
  96           later fully support this driver.
  97
  98 comment "Parallel IDE protocol modules"
  99         depends on PARIDE
 100
 101 config PARIDE_ATEN
 102         tristate "ATEN EH-100 protocol"
 103         depends on PARIDE
 104         help
 105           This option enables support for the ATEN EH-100 parallel port IDE
 106           protocol. This protocol is used in some inexpensive low performance
 107           parallel port kits made in Hong Kong. If you chose to build PARIDE
 108           support into your kernel, you may answer Y here to build in the
 109           protocol driver, otherwise you should answer M to build it as a
 110           loadable module. The module will be called aten. You must also
 111           have a high-level driver for the type of device that you want to
 112           support.
 113
 114 config PARIDE_BPCK
 115         tristate "MicroSolutions backpack (Series 5) protocol"
 116         depends on PARIDE
 117         ---help---
 118           This option enables support for the Micro Solutions BACKPACK
 119           parallel port Series 5 IDE protocol.  (Most BACKPACK drives made
 120           before 1999 were Series 5) Series 5 drives will NOT always have the
 121           Series noted on the bottom of the drive. Series 6 drivers will.
 122
 123           In other words, if your BACKPACK drive doesn't say "Series 6" on the
 124           bottom, enable this option.
 125
 126           If you chose to build PARIDE support into your kernel, you may
 127           answer Y here to build in the protocol driver, otherwise you should
 128           answer M to build it as a loadable module.  The module will be
 129           called bpck.  You must also have a high-level driver for the type
 130           of device that you want to support.
 131
 132 config PARIDE_BPCK6
 133         tristate "MicroSolutions backpack (Series 6) protocol"
 134         depends on PARIDE && !64BIT
 135         ---help---
 136           This option enables support for the Micro Solutions BACKPACK
 137           parallel port Series 6 IDE protocol.  (Most BACKPACK drives made
 138           after 1999 were Series 6) Series 6 drives will have the Series noted
 139           on the bottom of the drive.  Series 5 drivers don't always have it
 140           noted.
 141
 142           In other words, if your BACKPACK drive says "Series 6" on the
 143           bottom, enable this option.
 144
 145           If you chose to build PARIDE support into your kernel, you may
 146           answer Y here to build in the protocol driver, otherwise you should
 147           answer M to build it as a loadable module.  The module will be
 148           called bpck6.  You must also have a high-level driver for the type
 149           of device that you want to support.
 150
 151 config PARIDE_COMM
 152         tristate "DataStor Commuter protocol"
 153         depends on PARIDE
 154         help
 155           This option enables support for the Commuter parallel port IDE
 156           protocol from DataStor. If you chose to build PARIDE support
 157           into your kernel, you may answer Y here to build in the protocol
 158           driver, otherwise you should answer M to build it as a loadable
 159           module. The module will be called comm. You must also have
 160           a high-level driver for the type of device that you want to support.
 161
 162 config PARIDE_DSTR
 163         tristate "DataStor EP-2000 protocol"
 164         depends on PARIDE
 165         help
 166           This option enables support for the EP-2000 parallel port IDE
 167           protocol from DataStor. If you chose to build PARIDE support
 168           into your kernel, you may answer Y here to build in the protocol
 169           driver, otherwise you should answer M to build it as a loadable
 170           module. The module will be called dstr. You must also have
 171           a high-level driver for the type of device that you want to support.
 172
 173 config PARIDE_FIT2
 174         tristate "FIT TD-2000 protocol"
 175         depends on PARIDE
 176         help
 177           This option enables support for the TD-2000 parallel port IDE
 178           protocol from Fidelity International Technology. This is a simple
 179           (low speed) adapter that is used in some portable hard drives. If
 180           you chose to build PARIDE support into your kernel, you may answer Y
 181           here to build in the protocol driver, otherwise you should answer M
 182           to build it as a loadable module. The module will be called ktti.
 183           You must also have a high-level driver for the type of device that
 184           you want to support.
 185
 186 config PARIDE_FIT3
 187         tristate "FIT TD-3000 protocol"
 188         depends on PARIDE
 189         help
 190           This option enables support for the TD-3000 parallel port IDE
 191           protocol from Fidelity International Technology. This protocol is
 192           used in newer models of their portable disk, CD-ROM and PD/CD
 193           devices. If you chose to build PARIDE support into your kernel, you
 194           may answer Y here to build in the protocol driver, otherwise you
 195           should answer M to build it as a loadable module. The module will be
 196           called fit3. You must also have a high-level driver for the type
 197           of device that you want to support.
 198
 199 config PARIDE_EPAT
 200         tristate "Shuttle EPAT/EPEZ protocol"
 201         depends on PARIDE
 202         help
 203           This option enables support for the EPAT parallel port IDE protocol.
 204           EPAT is a parallel port IDE adapter manufactured by Shuttle
 205           Technology and widely used in devices from major vendors such as
 206           Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
 207           PARIDE support into your kernel, you may answer Y here to build in
 208           the protocol driver, otherwise you should answer M to build it as a
 209           loadable module. The module will be called epat. You must also
 210           have a high-level driver for the type of device that you want to
 211           support.
 212
 213 config PARIDE_EPATC8
 214         bool "Support c7/c8 chips (EXPERIMENTAL)"
 215         depends on PARIDE_EPAT && EXPERIMENTAL
 216         help
 217           This option enables support for the newer Shuttle EP1284 (aka c7 and
 218           c8) chip. You need this if you are using any recent Imation SuperDisk
 219           (LS-120) drive.
 220
 221 config PARIDE_EPIA
 222         tristate "Shuttle EPIA protocol"
 223         depends on PARIDE
 224         help
 225           This option enables support for the (obsolete) EPIA parallel port
 226           IDE protocol from Shuttle Technology. This adapter can still be
 227           found in some no-name kits. If you chose to build PARIDE support
 228           into your kernel, you may answer Y here to build in the protocol
 229           driver, otherwise you should answer M to build it as a loadable
 230           module. The module will be called epia. You must also have a
 231           high-level driver for the type of device that you want to support.
 232
 233 config PARIDE_FRIQ
 234         tristate "Freecom IQ ASIC-2 protocol"
 235         depends on PARIDE
 236         help
 237           This option enables support for version 2 of the Freecom IQ parallel
 238           port IDE adapter.  This adapter is used by the Maxell Superdisk
 239           drive.  If you chose to build PARIDE support into your kernel, you
 240           may answer Y here to build in the protocol driver, otherwise you
 241           should answer M to build it as a loadable module. The module will be
 242           called friq. You must also have a high-level driver for the type
 243           of device that you want to support.
 244
 245 config PARIDE_FRPW
 246         tristate "FreeCom power protocol"
 247         depends on PARIDE
 248         help
 249           This option enables support for the Freecom power parallel port IDE
 250           protocol. If you chose to build PARIDE support into your kernel, you
 251           may answer Y here to build in the protocol driver, otherwise you
 252           should answer M to build it as a loadable module. The module will be
 253           called frpw. You must also have a high-level driver for the type
 254           of device that you want to support.
 255
 256 config PARIDE_KBIC
 257         tristate "KingByte KBIC-951A/971A protocols"
 258         depends on PARIDE
 259         help
 260           This option enables support for the KBIC-951A and KBIC-971A parallel
 261           port IDE protocols from KingByte Information Corp. KingByte's
 262           adapters appear in many no-name portable disk and CD-ROM products,
 263           especially in Europe. If you chose to build PARIDE support into your
 264           kernel, you may answer Y here to build in the protocol driver,
 265           otherwise you should answer M to build it as a loadable module. The
 266           module will be called kbic. You must also have a high-level driver
 267           for the type of device that you want to support.
 268
 269 config PARIDE_KTTI
 270         tristate "KT PHd protocol"
 271         depends on PARIDE
 272         help
 273           This option enables support for the "PHd" parallel port IDE protocol
 274           from KT Technology. This is a simple (low speed) adapter that is
 275           used in some 2.5" portable hard drives. If you chose to build PARIDE
 276           support into your kernel, you may answer Y here to build in the
 277           protocol driver, otherwise you should answer M to build it as a
 278           loadable module. The module will be called ktti. You must also
 279           have a high-level driver for the type of device that you want to
 280           support.
 281
 282 config PARIDE_ON20
 283         tristate "OnSpec 90c20 protocol"
 284         depends on PARIDE
 285         help
 286           This option enables support for the (obsolete) 90c20 parallel port
 287           IDE protocol from OnSpec (often marketed under the ValuStore brand
 288           name). If you chose to build PARIDE support into your kernel, you
 289           may answer Y here to build in the protocol driver, otherwise you
 290           should answer M to build it as a loadable module. The module will
 291           be called on20. You must also have a high-level driver for the
 292           type of device that you want to support.
 293
 294 config PARIDE_ON26
 295         tristate "OnSpec 90c26 protocol"
 296         depends on PARIDE
 297         help
 298           This option enables support for the 90c26 parallel port IDE protocol
 299           from OnSpec Electronics (often marketed under the ValuStore brand
 300           name). If you chose to build PARIDE support into your kernel, you
 301           may answer Y here to build in the protocol driver, otherwise you
 302           should answer M to build it as a loadable module. The module will be
 303           called on26. You must also have a high-level driver for the type
 304           of device that you want to support.
 305
 306 #