drivers/clocksource/arm_global_timer.c

   1 /*
   2  * drivers/clocksource/arm_global_timer.c
   3  *
   4  * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
   5  * Author: Stuart Menefy <stuart.menefy@st.com>
   6  * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12
  13 #include <linux/init.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/clocksource.h>
  16 #include <linux/clockchips.h>
  17 #include <linux/cpu.h>
  18 #include <linux/clk.h>
  19 #include <linux/err.h>
  20 #include <linux/io.h>
  21 #include <linux/of.h>
  22 #include <linux/of_irq.h>
  23 #include <linux/of_address.h>
  24 #include <linux/sched_clock.h>
  25
  26 #include <asm/cputype.h>
  27
  28 #define GT_COUNTER0     0x00
  29 #define GT_COUNTER1     0x04
  30
  31 #define GT_CONTROL      0x08
  32 #define GT_CONTROL_TIMER_ENABLE         BIT(0)  /* this bit is NOT banked */
  33 #define GT_CONTROL_COMP_ENABLE          BIT(1)  /* banked */
  34 #define GT_CONTROL_IRQ_ENABLE           BIT(2)  /* banked */
  35 #define GT_CONTROL_AUTO_INC             BIT(3)  /* banked */
  36
  37 #define GT_INT_STATUS   0x0c
  38 #define GT_INT_STATUS_EVENT_FLAG        BIT(0)
  39
  40 #define GT_COMP0        0x10
  41 #define GT_COMP1        0x14
  42 #define GT_AUTO_INC     0x18
  43
  44 /*
  45  * We are expecting to be clocked by the ARM peripheral clock.
  46  *
  47  * Note: it is assumed we are using a prescaler value of zero, so this is
  48  * the units for all operations.
  49  */
  50 static void __iomem *gt_base;
  51 static unsigned long gt_clk_rate;
  52 static int gt_ppi;
  53 static struct clock_event_device __percpu *gt_evt;
  54
  55 /*
  56  * To get the value from the Global Timer Counter register proceed as follows:
  57  * 1. Read the upper 32-bit timer counter register
  58  * 2. Read the lower 32-bit timer counter register
  59  * 3. Read the upper 32-bit timer counter register again. If the value is
  60  *  different to the 32-bit upper value read previously, go back to step 2.
  61  *  Otherwise the 64-bit timer counter value is correct.
  62  */
  63 static u64 gt_counter_read(void)
  64 {
  65         u64 counter;
  66         u32 lower;
  67         u32 upper, old_upper;
  68
  69         upper = readl_relaxed(gt_base + GT_COUNTER1);
  70         do {
  71                 old_upper = upper;
  72                 lower = readl_relaxed(gt_base + GT_COUNTER0);
  73                 upper = readl_relaxed(gt_base + GT_COUNTER1);
  74         } while (upper != old_upper);
  75
  76         counter = upper;
  77         counter <<= 32;
  78         counter |= lower;
  79         return counter;
  80 }
  81
  82 /**
  83  * To ensure that updates to comparator value register do not set the
  84  * Interrupt Status Register proceed as follows:
  85  * 1. Clear the Comp Enable bit in the Timer Control Register.
  86  * 2. Write the lower 32-bit Comparator Value Register.
  87  * 3. Write the upper 32-bit Comparator Value Register.
  88  * 4. Set the Comp Enable bit and, if necessary, the IRQ enable bit.
  89  */
  90 static void gt_compare_set(unsigned long delta, int periodic)
  91 {
  92         u64 counter = gt_counter_read();
  93         unsigned long ctrl;
  94
  95         counter += delta;
  96         ctrl = GT_CONTROL_TIMER_ENABLE;
  97         writel(ctrl, gt_base + GT_CONTROL);
  98         writel(lower_32_bits(counter), gt_base + GT_COMP0);
  99         writel(upper_32_bits(counter), gt_base + GT_COMP1);
 100
 101         if (periodic) {
 102                 writel(delta, gt_base + GT_AUTO_INC);
 103                 ctrl |= GT_CONTROL_AUTO_INC;
 104         }
 105
 106         ctrl |= GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE;
 107         writel(ctrl, gt_base + GT_CONTROL);
 108 }
 109
 110 static void gt_clockevent_set_mode(enum clock_event_mode mode,
 111                                    struct clock_event_device *clk)
 112 {
 113         unsigned long ctrl;
 114
 115         switch (mode) {
 116         case CLOCK_EVT_MODE_PERIODIC:
 117                 gt_compare_set(DIV_ROUND_CLOSEST(gt_clk_rate, HZ), 1);
 118                 break;
 119         case CLOCK_EVT_MODE_ONESHOT:
 120         case CLOCK_EVT_MODE_UNUSED:
 121         case CLOCK_EVT_MODE_SHUTDOWN:
 122                 ctrl = readl(gt_base + GT_CONTROL);
 123                 ctrl &= ~(GT_CONTROL_COMP_ENABLE |
 124                                 GT_CONTROL_IRQ_ENABLE | GT_CONTROL_AUTO_INC);
 125                 writel(ctrl, gt_base + GT_CONTROL);
 126                 break;
 127         default:
 128                 break;
 129         }
 130 }
 131
 132 static int gt_clockevent_set_next_event(unsigned long evt,
 133                                         struct clock_event_device *unused)
 134 {
 135         gt_compare_set(evt, 0);
 136         return 0;
 137 }
 138
 139 static irqreturn_t gt_clockevent_interrupt(int irq, void *dev_id)
 140 {
 141         struct clock_event_device *evt = dev_id;
 142
 143         if (!(readl_relaxed(gt_base + GT_INT_STATUS) &
 144                                 GT_INT_STATUS_EVENT_FLAG))
 145                 return IRQ_NONE;
 146
 147         /**
 148          * ERRATA 740657( Global Timer can send 2 interrupts for
 149          * the same event in single-shot mode)
 150          * Workaround:
 151          *      Either disable single-shot mode.
 152          *      Or
 153          *      Modify the Interrupt Handler to avoid the
 154          *      offending sequence. This is achieved by clearing
 155          *      the Global Timer flag _after_ having incremented
 156          *      the Comparator register value to a higher value.
 157          */
 158         if (evt->mode == CLOCK_EVT_MODE_ONESHOT)
 159                 gt_compare_set(ULONG_MAX, 0);
 160
 161         writel_relaxed(GT_INT_STATUS_EVENT_FLAG, gt_base + GT_INT_STATUS);
 162         evt->event_handler(evt);
 163
 164         return IRQ_HANDLED;
 165 }
 166
 167 static int gt_clockevents_init(struct clock_event_device *clk)
 168 {
 169         int cpu = smp_processor_id();
 170
 171         clk->name = "arm_global_timer";
 172         clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 173         clk->set_mode = gt_clockevent_set_mode;
 174         clk->set_next_event = gt_clockevent_set_next_event;
 175         clk->cpumask = cpumask_of(cpu);
 176         clk->rating = 300;
 177         clk->irq = gt_ppi;
 178         clockevents_config_and_register(clk, gt_clk_rate,
 179                                         1, 0xffffffff);
 180         enable_percpu_irq(clk->irq, IRQ_TYPE_NONE);
 181         return 0;
 182 }
 183
 184 static void gt_clockevents_stop(struct clock_event_device *clk)
 185 {
 186         gt_clockevent_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
 187         disable_percpu_irq(clk->irq);
 188 }
 189
 190 static cycle_t gt_clocksource_read(struct clocksource *cs)
 191 {
 192         return gt_counter_read();
 193 }
 194
 195 static struct clocksource gt_clocksource = {
 196         .name   = "arm_global_timer",
 197         .rating = 300,
 198         .read   = gt_clocksource_read,
 199         .mask   = CLOCKSOURCE_MASK(64),
 200         .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 201 };
 202
 203 #ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 204 static u32 notrace gt_sched_clock_read(void)
 205 {
 206         return gt_counter_read();
 207 }
 208 #endif
 209
 210 static void __init gt_clocksource_init(void)
 211 {
 212         writel(0, gt_base + GT_CONTROL);
 213         writel(0, gt_base + GT_COUNTER0);
 214         writel(0, gt_base + GT_COUNTER1);
 215         /* enables timer on all the cores */
 216         writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL);
 217
 218 #ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 219         setup_sched_clock(gt_sched_clock_read, 32, gt_clk_rate);
 220 #endif
 221         clocksource_register_hz(&gt_clocksource, gt_clk_rate);
 222 }
 223
 224 static int gt_cpu_notify(struct notifier_block *self, unsigned long action,
 225                          void *hcpu)
 226 {
 227         switch (action & ~CPU_TASKS_FROZEN) {
 228         case CPU_STARTING:
 229                 gt_clockevents_init(this_cpu_ptr(gt_evt));
 230                 break;
 231         case CPU_DYING:
 232                 gt_clockevents_stop(this_cpu_ptr(gt_evt));
 233                 break;
 234         }
 235
 236         return NOTIFY_OK;
 237 }
 238 static struct notifier_block gt_cpu_nb = {
 239         .notifier_call = gt_cpu_notify,
 240 };
 241
 242 static void __init global_timer_of_register(struct device_node *np)
 243 {
 244         struct clk *gt_clk;
 245         int err = 0;
 246
 247         /*
 248          * In r2p0 the comparators for each processor with the global timer
 249          * fire when the timer value is greater than or equal to. In previous
 250          * revisions the comparators fired when the timer value was equal to.
 251          */
 252         if ((read_cpuid_id() & 0xf0000f) < 0x200000) {
 253                 pr_warn("global-timer: non support for this cpu version.\n");
 254                 return;
 255         }
 256
 257         gt_ppi = irq_of_parse_and_map(np, 0);
 258         if (!gt_ppi) {
 259                 pr_warn("global-timer: unable to parse irq\n");
 260                 return;
 261         }
 262
 263         gt_base = of_iomap(np, 0);
 264         if (!gt_base) {
 265                 pr_warn("global-timer: invalid base address\n");
 266                 return;
 267         }
 268
 269         gt_clk = of_clk_get(np, 0);
 270         if (!IS_ERR(gt_clk)) {
 271                 err = clk_prepare_enable(gt_clk);
 272                 if (err)
 273                         goto out_unmap;
 274         } else {
 275                 pr_warn("global-timer: clk not found\n");
 276                 err = -EINVAL;
 277                 goto out_unmap;
 278         }
 279
 280         gt_clk_rate = clk_get_rate(gt_clk);
 281         gt_evt = alloc_percpu(struct clock_event_device);
 282         if (!gt_evt) {
 283                 pr_warn("global-timer: can't allocate memory\n");
 284                 err = -ENOMEM;
 285                 goto out_clk;
 286         }
 287
 288         err = request_percpu_irq(gt_ppi, gt_clockevent_interrupt,
 289                                  "gt", gt_evt);
 290         if (err) {
 291                 pr_warn("global-timer: can't register interrupt %d (%d)\n",
 292                         gt_ppi, err);
 293                 goto out_free;
 294         }
 295
 296         err = register_cpu_notifier(&gt_cpu_nb);
 297         if (err) {
 298                 pr_warn("global-timer: unable to register cpu notifier.\n");
 299                 goto out_irq;
 300         }
 301
 302         /* Immediately configure the timer on the boot CPU */
 303         gt_clocksource_init();
 304         gt_clockevents_init(this_cpu_ptr(gt_evt));
 305
 306         return;
 307
 308 out_irq:
 309         free_percpu_irq(gt_ppi, gt_evt);
 310 out_free:
 311         free_percpu(gt_evt);
 312 out_clk:
 313         clk_disable_unprepare(gt_clk);
 314 out_unmap:
 315         iounmap(gt_base);
 316         WARN(err, "ARM Global timer register failed (%d)\n", err);
 317 }
 318
 319 /* Only tested on r2p2 and r3p0  */
 320 CLOCKSOURCE_OF_DECLARE(arm_gt, "arm,cortex-a9-global-timer",
 321                         global_timer_of_register);