Merge remote-tracking branch 'spi/fix/atmel' into spi-linus
[deliverable/linux.git] / drivers / cpufreq / blackfin-cpufreq.c
1 /*
2 * Blackfin core clock scaling
3 *
4 * Copyright 2008-2011 Analog Devices Inc.
5 *
6 * Licensed under the GPL-2 or later.
7 */
8
9 #include <linux/kernel.h>
10 #include <linux/module.h>
11 #include <linux/types.h>
12 #include <linux/init.h>
13 #include <linux/clk.h>
14 #include <linux/cpufreq.h>
15 #include <linux/fs.h>
16 #include <linux/delay.h>
17 #include <asm/blackfin.h>
18 #include <asm/time.h>
19 #include <asm/dpmc.h>
20
21
22 /* this is the table of CCLK frequencies, in Hz */
23 /* .index is the entry in the auxiliary dpm_state_table[] */
24 static struct cpufreq_frequency_table bfin_freq_table[] = {
25 {
26 .frequency = CPUFREQ_TABLE_END,
27 .index = 0,
28 },
29 {
30 .frequency = CPUFREQ_TABLE_END,
31 .index = 1,
32 },
33 {
34 .frequency = CPUFREQ_TABLE_END,
35 .index = 2,
36 },
37 {
38 .frequency = CPUFREQ_TABLE_END,
39 .index = 0,
40 },
41 };
42
43 static struct bfin_dpm_state {
44 unsigned int csel; /* system clock divider */
45 unsigned int tscale; /* change the divider on the core timer interrupt */
46 } dpm_state_table[3];
47
48 #if defined(CONFIG_CYCLES_CLOCKSOURCE)
49 /*
50 * normalized to maximum frequency offset for CYCLES,
51 * used in time-ts cycles clock source, but could be used
52 * somewhere also.
53 */
54 unsigned long long __bfin_cycles_off;
55 unsigned int __bfin_cycles_mod;
56 #endif
57
58 /**************************************************************************/
59 static void __init bfin_init_tables(unsigned long cclk, unsigned long sclk)
60 {
61
62 unsigned long csel, min_cclk;
63 int index;
64
65 /* Anomaly 273 seems to still exist on non-BF54x w/dcache turned on */
66 #if ANOMALY_05000273 || ANOMALY_05000274 || \
67 (!(defined(CONFIG_BF54x) || defined(CONFIG_BF60x)) \
68 && defined(CONFIG_BFIN_EXTMEM_DCACHEABLE))
69 min_cclk = sclk * 2;
70 #else
71 min_cclk = sclk;
72 #endif
73
74 #ifndef CONFIG_BF60x
75 csel = ((bfin_read_PLL_DIV() & CSEL) >> 4);
76 #else
77 csel = bfin_read32(CGU0_DIV) & 0x1F;
78 #endif
79
80 for (index = 0; (cclk >> index) >= min_cclk && csel <= 3 && index < 3; index++, csel++) {
81 bfin_freq_table[index].frequency = cclk >> index;
82 #ifndef CONFIG_BF60x
83 dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
84 #else
85 dpm_state_table[index].csel = csel;
86 #endif
87 dpm_state_table[index].tscale = (TIME_SCALE >> index) - 1;
88
89 pr_debug("cpufreq: freq:%d csel:0x%x tscale:%d\n",
90 bfin_freq_table[index].frequency,
91 dpm_state_table[index].csel,
92 dpm_state_table[index].tscale);
93 }
94 return;
95 }
96
97 static void bfin_adjust_core_timer(void *info)
98 {
99 unsigned int tscale;
100 unsigned int index = *(unsigned int *)info;
101
102 /* we have to adjust the core timer, because it is using cclk */
103 tscale = dpm_state_table[index].tscale;
104 bfin_write_TSCALE(tscale);
105 return;
106 }
107
108 static unsigned int bfin_getfreq_khz(unsigned int cpu)
109 {
110 /* Both CoreA/B have the same core clock */
111 return get_cclk() / 1000;
112 }
113
114 #ifdef CONFIG_BF60x
115 unsigned long cpu_set_cclk(int cpu, unsigned long new)
116 {
117 struct clk *clk;
118 int ret;
119
120 clk = clk_get(NULL, "CCLK");
121 if (IS_ERR(clk))
122 return -ENODEV;
123
124 ret = clk_set_rate(clk, new);
125 clk_put(clk);
126 return ret;
127 }
128 #endif
129
130 static int bfin_target(struct cpufreq_policy *policy,
131 unsigned int target_freq, unsigned int relation)
132 {
133 #ifndef CONFIG_BF60x
134 unsigned int plldiv;
135 #endif
136 unsigned int index;
137 unsigned long cclk_hz;
138 struct cpufreq_freqs freqs;
139 static unsigned long lpj_ref;
140 static unsigned int lpj_ref_freq;
141 int ret = 0;
142
143 #if defined(CONFIG_CYCLES_CLOCKSOURCE)
144 cycles_t cycles;
145 #endif
146
147 if (cpufreq_frequency_table_target(policy, bfin_freq_table, target_freq,
148 relation, &index))
149 return -EINVAL;
150
151 cclk_hz = bfin_freq_table[index].frequency;
152
153 freqs.old = bfin_getfreq_khz(0);
154 freqs.new = cclk_hz;
155
156 pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
157 cclk_hz, target_freq, freqs.old);
158
159 cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
160 #ifndef CONFIG_BF60x
161 plldiv = (bfin_read_PLL_DIV() & SSEL) | dpm_state_table[index].csel;
162 bfin_write_PLL_DIV(plldiv);
163 #else
164 ret = cpu_set_cclk(policy->cpu, freqs.new * 1000);
165 if (ret != 0) {
166 WARN_ONCE(ret, "cpufreq set freq failed %d\n", ret);
167 return ret;
168 }
169 #endif
170 on_each_cpu(bfin_adjust_core_timer, &index, 1);
171 #if defined(CONFIG_CYCLES_CLOCKSOURCE)
172 cycles = get_cycles();
173 SSYNC();
174 cycles += 10; /* ~10 cycles we lose after get_cycles() */
175 __bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index);
176 __bfin_cycles_mod = index;
177 #endif
178 if (!lpj_ref_freq) {
179 lpj_ref = loops_per_jiffy;
180 lpj_ref_freq = freqs.old;
181 }
182 if (freqs.new != freqs.old) {
183 loops_per_jiffy = cpufreq_scale(lpj_ref,
184 lpj_ref_freq, freqs.new);
185 }
186
187 /* TODO: just test case for cycles clock source, remove later */
188 cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
189
190 pr_debug("cpufreq: done\n");
191 return ret;
192 }
193
194 static int bfin_verify_speed(struct cpufreq_policy *policy)
195 {
196 return cpufreq_frequency_table_verify(policy, bfin_freq_table);
197 }
198
199 static int __bfin_cpu_init(struct cpufreq_policy *policy)
200 {
201
202 unsigned long cclk, sclk;
203
204 cclk = get_cclk() / 1000;
205 sclk = get_sclk() / 1000;
206
207 if (policy->cpu == CPUFREQ_CPU)
208 bfin_init_tables(cclk, sclk);
209
210 policy->cpuinfo.transition_latency = 50000; /* 50us assumed */
211
212 policy->cur = cclk;
213 cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu);
214 return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table);
215 }
216
217 static struct freq_attr *bfin_freq_attr[] = {
218 &cpufreq_freq_attr_scaling_available_freqs,
219 NULL,
220 };
221
222 static struct cpufreq_driver bfin_driver = {
223 .verify = bfin_verify_speed,
224 .target = bfin_target,
225 .get = bfin_getfreq_khz,
226 .init = __bfin_cpu_init,
227 .name = "bfin cpufreq",
228 .owner = THIS_MODULE,
229 .attr = bfin_freq_attr,
230 };
231
232 static int __init bfin_cpu_init(void)
233 {
234 return cpufreq_register_driver(&bfin_driver);
235 }
236
237 static void __exit bfin_cpu_exit(void)
238 {
239 cpufreq_unregister_driver(&bfin_driver);
240 }
241
242 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
243 MODULE_DESCRIPTION("cpufreq driver for Blackfin");
244 MODULE_LICENSE("GPL");
245
246 module_init(bfin_cpu_init);
247 module_exit(bfin_cpu_exit);
This page took 0.042722 seconds and 6 git commands to generate.