drivers/gpu/drm/Kconfig

   1 #
   2 # Drm device configuration
   3 #
   4 # This driver provides support for the
   5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
   6 #
   7 menuconfig DRM
   8         tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
   9         depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && MMU && HAS_DMA
  10         select HDMI
  11         select FB_CMDLINE
  12         select I2C
  13         select I2C_ALGOBIT
  14         select DMA_SHARED_BUFFER
  15         help
  16           Kernel-level support for the Direct Rendering Infrastructure (DRI)
  17           introduced in XFree86 4.0. If you say Y here, you need to select
  18           the module that's right for your graphics card from the list below.
  19           These modules provide support for synchronization, security, and
  20           DMA transfers. Please see <http://dri.sourceforge.net/> for more
  21           details.  You should also select and configure AGP
  22           (/dev/agpgart) support if it is available for your platform.
  23
  24 config DRM_MIPI_DSI
  25         bool
  26         depends on DRM
  27
  28 config DRM_KMS_HELPER
  29         tristate
  30         depends on DRM
  31         help
  32           CRTC helpers for KMS drivers.
  33
  34 config DRM_KMS_FB_HELPER
  35         bool
  36         depends on DRM_KMS_HELPER
  37         select FB
  38         select FRAMEBUFFER_CONSOLE if !EXPERT
  39         select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
  40         select FB_SYS_FOPS
  41         select FB_SYS_FILLRECT
  42         select FB_SYS_COPYAREA
  43         select FB_SYS_IMAGEBLIT
  44         select FB_CFB_FILLRECT
  45         select FB_CFB_COPYAREA
  46         select FB_CFB_IMAGEBLIT
  47         help
  48           FBDEV helpers for KMS drivers.
  49
  50 config DRM_FBDEV_EMULATION
  51         bool "Enable legacy fbdev support for your modesetting driver"
  52         depends on DRM
  53         select DRM_KMS_HELPER
  54         select DRM_KMS_FB_HELPER
  55         default y
  56         help
  57           Choose this option if you have a need for the legacy fbdev
  58           support. Note that this support also provides the linux console
  59           support on top of your modesetting driver.
  60
  61           If in doubt, say "Y".
  62
  63 config DRM_LOAD_EDID_FIRMWARE
  64         bool "Allow to specify an EDID data set instead of probing for it"
  65         depends on DRM_KMS_HELPER
  66         help
  67           Say Y here, if you want to use EDID data to be loaded from the
  68           /lib/firmware directory or one of the provided built-in
  69           data sets. This may be necessary, if the graphics adapter or
  70           monitor are unable to provide appropriate EDID data. Since this
  71           feature is provided as a workaround for broken hardware, the
  72           default case is N. Details and instructions how to build your own
  73           EDID data are given in Documentation/EDID/HOWTO.txt.
  74
  75 config DRM_TTM
  76         tristate
  77         depends on DRM
  78         help
  79           GPU memory management subsystem for devices with multiple
  80           GPU memory types. Will be enabled automatically if a device driver
  81           uses it.
  82
  83 config DRM_GEM_CMA_HELPER
  84         bool
  85         depends on DRM
  86         help
  87           Choose this if you need the GEM CMA helper functions
  88
  89 config DRM_KMS_CMA_HELPER
  90         bool
  91         depends on DRM
  92         select DRM_GEM_CMA_HELPER
  93         select DRM_KMS_FB_HELPER
  94         select FB_SYS_FILLRECT
  95         select FB_SYS_COPYAREA
  96         select FB_SYS_IMAGEBLIT
  97         help
  98           Choose this if you need the KMS CMA helper functions
  99
 100 source "drivers/gpu/drm/i2c/Kconfig"
 101
 102 config DRM_TDFX
 103         tristate "3dfx Banshee/Voodoo3+"
 104         depends on DRM && PCI
 105         help
 106           Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
 107           graphics card.  If M is selected, the module will be called tdfx.
 108
 109 config DRM_R128
 110         tristate "ATI Rage 128"
 111         depends on DRM && PCI
 112         select FW_LOADER
 113         help
 114           Choose this option if you have an ATI Rage 128 graphics card.  If M
 115           is selected, the module will be called r128.  AGP support for
 116           this card is strongly suggested (unless you have a PCI version).
 117
 118 config DRM_RADEON
 119         tristate "ATI Radeon"
 120         depends on DRM && PCI
 121         select FB_CFB_FILLRECT
 122         select FB_CFB_COPYAREA
 123         select FB_CFB_IMAGEBLIT
 124         select FW_LOADER
 125         select DRM_KMS_HELPER
 126         select DRM_KMS_FB_HELPER
 127         select DRM_TTM
 128         select POWER_SUPPLY
 129         select HWMON
 130         select BACKLIGHT_CLASS_DEVICE
 131         select BACKLIGHT_LCD_SUPPORT
 132         select INTERVAL_TREE
 133         help
 134           Choose this option if you have an ATI Radeon graphics card.  There
 135           are both PCI and AGP versions.  You don't need to choose this to
 136           run the Radeon in plain VGA mode.
 137
 138           If M is selected, the module will be called radeon.
 139
 140 source "drivers/gpu/drm/radeon/Kconfig"
 141
 142 config DRM_AMDGPU
 143         tristate "AMD GPU"
 144         depends on DRM && PCI
 145         select FB_CFB_FILLRECT
 146         select FB_CFB_COPYAREA
 147         select FB_CFB_IMAGEBLIT
 148         select FW_LOADER
 149         select DRM_KMS_HELPER
 150         select DRM_KMS_FB_HELPER
 151         select DRM_TTM
 152         select POWER_SUPPLY
 153         select HWMON
 154         select BACKLIGHT_CLASS_DEVICE
 155         select BACKLIGHT_LCD_SUPPORT
 156         select INTERVAL_TREE
 157         help
 158           Choose this option if you have a recent AMD Radeon graphics card.
 159
 160           If M is selected, the module will be called amdgpu.
 161
 162 source "drivers/gpu/drm/amd/amdgpu/Kconfig"
 163 source "drivers/gpu/drm/amd/powerplay/Kconfig"
 164
 165 source "drivers/gpu/drm/nouveau/Kconfig"
 166
 167 config DRM_I810
 168         tristate "Intel I810"
 169         # !PREEMPT because of missing ioctl locking
 170         depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
 171         help
 172           Choose this option if you have an Intel I810 graphics card.  If M is
 173           selected, the module will be called i810.  AGP support is required
 174           for this driver to work.
 175
 176 source "drivers/gpu/drm/i915/Kconfig"
 177
 178 config DRM_MGA
 179         tristate "Matrox g200/g400"
 180         depends on DRM && PCI
 181         select FW_LOADER
 182         help
 183           Choose this option if you have a Matrox G200, G400 or G450 graphics
 184           card.  If M is selected, the module will be called mga.  AGP
 185           support is required for this driver to work.
 186
 187 config DRM_SIS
 188         tristate "SiS video cards"
 189         depends on DRM && AGP
 190         depends on FB_SIS || FB_SIS=n
 191         help
 192           Choose this option if you have a SiS 630 or compatible video
 193           chipset. If M is selected the module will be called sis. AGP
 194           support is required for this driver to work.
 195
 196 config DRM_VIA
 197         tristate "Via unichrome video cards"
 198         depends on DRM && PCI
 199         help
 200           Choose this option if you have a Via unichrome or compatible video
 201           chipset. If M is selected the module will be called via.
 202
 203 config DRM_SAVAGE
 204         tristate "Savage video cards"
 205         depends on DRM && PCI
 206         help
 207           Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 208           chipset. If M is selected the module will be called savage.
 209
 210 config DRM_VGEM
 211         tristate "Virtual GEM provider"
 212         depends on DRM
 213         help
 214           Choose this option to get a virtual graphics memory manager,
 215           as used by Mesa's software renderer for enhanced performance.
 216           If M is selected the module will be called vgem.
 217
 218
 219 source "drivers/gpu/drm/exynos/Kconfig"
 220
 221 source "drivers/gpu/drm/rockchip/Kconfig"
 222
 223 source "drivers/gpu/drm/vmwgfx/Kconfig"
 224
 225 source "drivers/gpu/drm/gma500/Kconfig"
 226
 227 source "drivers/gpu/drm/udl/Kconfig"
 228
 229 source "drivers/gpu/drm/ast/Kconfig"
 230
 231 source "drivers/gpu/drm/mgag200/Kconfig"
 232
 233 source "drivers/gpu/drm/cirrus/Kconfig"
 234
 235 source "drivers/gpu/drm/armada/Kconfig"
 236
 237 source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
 238
 239 source "drivers/gpu/drm/rcar-du/Kconfig"
 240
 241 source "drivers/gpu/drm/shmobile/Kconfig"
 242
 243 source "drivers/gpu/drm/omapdrm/Kconfig"
 244
 245 source "drivers/gpu/drm/tilcdc/Kconfig"
 246
 247 source "drivers/gpu/drm/qxl/Kconfig"
 248
 249 source "drivers/gpu/drm/bochs/Kconfig"
 250
 251 source "drivers/gpu/drm/virtio/Kconfig"
 252
 253 source "drivers/gpu/drm/msm/Kconfig"
 254
 255 source "drivers/gpu/drm/fsl-dcu/Kconfig"
 256
 257 source "drivers/gpu/drm/tegra/Kconfig"
 258
 259 source "drivers/gpu/drm/panel/Kconfig"
 260
 261 source "drivers/gpu/drm/bridge/Kconfig"
 262
 263 source "drivers/gpu/drm/sti/Kconfig"
 264
 265 source "drivers/gpu/drm/amd/amdkfd/Kconfig"
 266
 267 source "drivers/gpu/drm/imx/Kconfig"
 268
 269 source "drivers/gpu/drm/vc4/Kconfig"
 270
 271 source "drivers/gpu/drm/etnaviv/Kconfig"