2 * Copyright (c) 2006-2009 Red Hat Inc.
3 * Copyright (c) 2006-2008 Intel Corporation
4 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
6 * DRM framebuffer helper functions
8 * Permission to use, copy, modify, distribute, and sell this software and its
9 * documentation for any purpose is hereby granted without fee, provided that
10 * the above copyright notice appear in all copies and that both that copyright
11 * notice and this permission notice appear in supporting documentation, and
12 * that the name of the copyright holders not be used in advertising or
13 * publicity pertaining to distribution of the software without specific,
14 * written prior permission. The copyright holders make no representations
15 * about the suitability of this software for any purpose. It is provided "as
16 * is" without express or implied warranty.
18 * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
19 * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
20 * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
21 * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
22 * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
23 * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
27 * Dave Airlie <airlied@linux.ie>
28 * Jesse Barnes <jesse.barnes@intel.com>
30 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
32 #include <linux/kernel.h>
33 #include <linux/sysrq.h>
34 #include <linux/slab.h>
36 #include <linux/module.h>
38 #include <drm/drm_crtc.h>
39 #include <drm/drm_fb_helper.h>
40 #include <drm/drm_crtc_helper.h>
42 static LIST_HEAD(kernel_fb_helper_list
);
47 * The fb helper functions are useful to provide an fbdev on top of a drm kernel
48 * mode setting driver. They can be used mostly independantely from the crtc
49 * helper functions used by many drivers to implement the kernel mode setting
52 * Initialization is done as a three-step process with drm_fb_helper_init(),
53 * drm_fb_helper_single_add_all_connectors() and drm_fb_helper_initial_config().
54 * Drivers with fancier requirements than the default beheviour can override the
55 * second step with their own code. Teardown is done with drm_fb_helper_fini().
57 * At runtime drivers should restore the fbdev console by calling
58 * drm_fb_helper_restore_fbdev_mode() from their ->lastclose callback. They
59 * should also notify the fb helper code from updates to the output
60 * configuration by calling drm_fb_helper_hotplug_event(). For easier
61 * integration with the output polling code in drm_crtc_helper.c the modeset
62 * code proves a ->output_poll_changed callback.
64 * All other functions exported by the fb helper library can be used to
65 * implement the fbdev driver interface by the driver.
69 * drm_fb_helper_single_add_all_connectors() - add all connectors to fbdev
71 * @fb_helper: fbdev initialized with drm_fb_helper_init
73 * This functions adds all the available connectors for use with the given
74 * fb_helper. This is a separate step to allow drivers to freely assign
75 * connectors to the fbdev, e.g. if some are reserved for special purposes or
76 * not adequate to be used for the fbcon.
78 * Since this is part of the initial setup before the fbdev is published, no
79 * locking is required.
81 int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper
*fb_helper
)
83 struct drm_device
*dev
= fb_helper
->dev
;
84 struct drm_connector
*connector
;
87 list_for_each_entry(connector
, &dev
->mode_config
.connector_list
, head
) {
88 struct drm_fb_helper_connector
*fb_helper_connector
;
90 fb_helper_connector
= kzalloc(sizeof(struct drm_fb_helper_connector
), GFP_KERNEL
);
91 if (!fb_helper_connector
)
94 fb_helper_connector
->connector
= connector
;
95 fb_helper
->connector_info
[fb_helper
->connector_count
++] = fb_helper_connector
;
99 for (i
= 0; i
< fb_helper
->connector_count
; i
++) {
100 kfree(fb_helper
->connector_info
[i
]);
101 fb_helper
->connector_info
[i
] = NULL
;
103 fb_helper
->connector_count
= 0;
106 EXPORT_SYMBOL(drm_fb_helper_single_add_all_connectors
);
108 static int drm_fb_helper_parse_command_line(struct drm_fb_helper
*fb_helper
)
110 struct drm_fb_helper_connector
*fb_helper_conn
;
113 for (i
= 0; i
< fb_helper
->connector_count
; i
++) {
114 struct drm_cmdline_mode
*mode
;
115 struct drm_connector
*connector
;
118 fb_helper_conn
= fb_helper
->connector_info
[i
];
119 connector
= fb_helper_conn
->connector
;
120 mode
= &fb_helper_conn
->cmdline_mode
;
122 /* do something on return - turn off connector maybe */
123 if (fb_get_options(drm_get_connector_name(connector
), &option
))
126 if (drm_mode_parse_command_line_for_connector(option
,
131 switch (mode
->force
) {
135 case DRM_FORCE_ON_DIGITAL
:
144 DRM_INFO("forcing %s connector %s\n",
145 drm_get_connector_name(connector
), s
);
146 connector
->force
= mode
->force
;
149 DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
150 drm_get_connector_name(connector
),
151 mode
->xres
, mode
->yres
,
152 mode
->refresh_specified
? mode
->refresh
: 60,
153 mode
->rb
? " reduced blanking" : "",
154 mode
->margins
? " with margins" : "",
155 mode
->interlace
? " interlaced" : "");
162 static void drm_fb_helper_save_lut_atomic(struct drm_crtc
*crtc
, struct drm_fb_helper
*helper
)
164 uint16_t *r_base
, *g_base
, *b_base
;
167 if (helper
->funcs
->gamma_get
== NULL
)
170 r_base
= crtc
->gamma_store
;
171 g_base
= r_base
+ crtc
->gamma_size
;
172 b_base
= g_base
+ crtc
->gamma_size
;
174 for (i
= 0; i
< crtc
->gamma_size
; i
++)
175 helper
->funcs
->gamma_get(crtc
, &r_base
[i
], &g_base
[i
], &b_base
[i
], i
);
178 static void drm_fb_helper_restore_lut_atomic(struct drm_crtc
*crtc
)
180 uint16_t *r_base
, *g_base
, *b_base
;
182 if (crtc
->funcs
->gamma_set
== NULL
)
185 r_base
= crtc
->gamma_store
;
186 g_base
= r_base
+ crtc
->gamma_size
;
187 b_base
= g_base
+ crtc
->gamma_size
;
189 crtc
->funcs
->gamma_set(crtc
, r_base
, g_base
, b_base
, 0, crtc
->gamma_size
);
193 * drm_fb_helper_debug_enter - implementation for ->fb_debug_enter
194 * @info: fbdev registered by the helper
196 int drm_fb_helper_debug_enter(struct fb_info
*info
)
198 struct drm_fb_helper
*helper
= info
->par
;
199 struct drm_crtc_helper_funcs
*funcs
;
202 if (list_empty(&kernel_fb_helper_list
))
205 list_for_each_entry(helper
, &kernel_fb_helper_list
, kernel_fb_list
) {
206 for (i
= 0; i
< helper
->crtc_count
; i
++) {
207 struct drm_mode_set
*mode_set
=
208 &helper
->crtc_info
[i
].mode_set
;
210 if (!mode_set
->crtc
->enabled
)
213 funcs
= mode_set
->crtc
->helper_private
;
214 drm_fb_helper_save_lut_atomic(mode_set
->crtc
, helper
);
215 funcs
->mode_set_base_atomic(mode_set
->crtc
,
219 ENTER_ATOMIC_MODE_SET
);
225 EXPORT_SYMBOL(drm_fb_helper_debug_enter
);
227 /* Find the real fb for a given fb helper CRTC */
228 static struct drm_framebuffer
*drm_mode_config_fb(struct drm_crtc
*crtc
)
230 struct drm_device
*dev
= crtc
->dev
;
233 list_for_each_entry(c
, &dev
->mode_config
.crtc_list
, head
) {
234 if (crtc
->base
.id
== c
->base
.id
)
242 * drm_fb_helper_debug_leave - implementation for ->fb_debug_leave
243 * @info: fbdev registered by the helper
245 int drm_fb_helper_debug_leave(struct fb_info
*info
)
247 struct drm_fb_helper
*helper
= info
->par
;
248 struct drm_crtc
*crtc
;
249 struct drm_crtc_helper_funcs
*funcs
;
250 struct drm_framebuffer
*fb
;
253 for (i
= 0; i
< helper
->crtc_count
; i
++) {
254 struct drm_mode_set
*mode_set
= &helper
->crtc_info
[i
].mode_set
;
255 crtc
= mode_set
->crtc
;
256 funcs
= crtc
->helper_private
;
257 fb
= drm_mode_config_fb(crtc
);
263 DRM_ERROR("no fb to restore??\n");
267 drm_fb_helper_restore_lut_atomic(mode_set
->crtc
);
268 funcs
->mode_set_base_atomic(mode_set
->crtc
, fb
, crtc
->x
,
269 crtc
->y
, LEAVE_ATOMIC_MODE_SET
);
274 EXPORT_SYMBOL(drm_fb_helper_debug_leave
);
277 * drm_fb_helper_restore_fbdev_mode - restore fbdev configuration
278 * @fb_helper: fbcon to restore
280 * This should be called from driver's drm ->lastclose callback
281 * when implementing an fbcon on top of kms using this helper. This ensures that
282 * the user isn't greeted with a black screen when e.g. X dies.
284 bool drm_fb_helper_restore_fbdev_mode(struct drm_fb_helper
*fb_helper
)
286 struct drm_device
*dev
= fb_helper
->dev
;
287 struct drm_plane
*plane
;
291 drm_warn_on_modeset_not_all_locked(dev
);
293 list_for_each_entry(plane
, &dev
->mode_config
.plane_list
, head
)
294 drm_plane_force_disable(plane
);
296 for (i
= 0; i
< fb_helper
->crtc_count
; i
++) {
297 struct drm_mode_set
*mode_set
= &fb_helper
->crtc_info
[i
].mode_set
;
298 struct drm_crtc
*crtc
= mode_set
->crtc
;
301 if (crtc
->funcs
->cursor_set
) {
302 ret
= crtc
->funcs
->cursor_set(crtc
, NULL
, 0, 0, 0);
307 ret
= drm_mode_set_config_internal(mode_set
);
313 EXPORT_SYMBOL(drm_fb_helper_restore_fbdev_mode
);
316 * restore fbcon display for all kms driver's using this helper, used for sysrq
317 * and panic handling.
319 static bool drm_fb_helper_force_kernel_mode(void)
321 bool ret
, error
= false;
322 struct drm_fb_helper
*helper
;
324 if (list_empty(&kernel_fb_helper_list
))
327 list_for_each_entry(helper
, &kernel_fb_helper_list
, kernel_fb_list
) {
328 if (helper
->dev
->switch_power_state
== DRM_SWITCH_POWER_OFF
)
331 ret
= drm_fb_helper_restore_fbdev_mode(helper
);
338 static int drm_fb_helper_panic(struct notifier_block
*n
, unsigned long ununsed
,
342 * It's a waste of time and effort to switch back to text console
343 * if the kernel should reboot before panic messages can be seen.
345 if (panic_timeout
< 0)
348 pr_err("panic occurred, switching back to text console\n");
349 return drm_fb_helper_force_kernel_mode();
352 static struct notifier_block paniced
= {
353 .notifier_call
= drm_fb_helper_panic
,
356 static bool drm_fb_helper_is_bound(struct drm_fb_helper
*fb_helper
)
358 struct drm_device
*dev
= fb_helper
->dev
;
359 struct drm_crtc
*crtc
;
360 int bound
= 0, crtcs_bound
= 0;
362 /* Sometimes user space wants everything disabled, so don't steal the
363 * display if there's a master. */
364 if (dev
->primary
->master
)
367 list_for_each_entry(crtc
, &dev
->mode_config
.crtc_list
, head
) {
370 if (crtc
->fb
== fb_helper
->fb
)
374 if (bound
< crtcs_bound
)
380 #ifdef CONFIG_MAGIC_SYSRQ
381 static void drm_fb_helper_restore_work_fn(struct work_struct
*ignored
)
384 ret
= drm_fb_helper_force_kernel_mode();
386 DRM_ERROR("Failed to restore crtc configuration\n");
388 static DECLARE_WORK(drm_fb_helper_restore_work
, drm_fb_helper_restore_work_fn
);
390 static void drm_fb_helper_sysrq(int dummy1
)
392 schedule_work(&drm_fb_helper_restore_work
);
395 static struct sysrq_key_op sysrq_drm_fb_helper_restore_op
= {
396 .handler
= drm_fb_helper_sysrq
,
397 .help_msg
= "force-fb(V)",
398 .action_msg
= "Restore framebuffer console",
401 static struct sysrq_key_op sysrq_drm_fb_helper_restore_op
= { };
404 static void drm_fb_helper_dpms(struct fb_info
*info
, int dpms_mode
)
406 struct drm_fb_helper
*fb_helper
= info
->par
;
407 struct drm_device
*dev
= fb_helper
->dev
;
408 struct drm_crtc
*crtc
;
409 struct drm_connector
*connector
;
413 * fbdev->blank can be called from irq context in case of a panic.
414 * Since we already have our own special panic handler which will
415 * restore the fbdev console mode completely, just bail out early.
417 if (oops_in_progress
)
421 * For each CRTC in this fb, turn the connectors on/off.
423 drm_modeset_lock_all(dev
);
424 if (!drm_fb_helper_is_bound(fb_helper
)) {
425 drm_modeset_unlock_all(dev
);
429 for (i
= 0; i
< fb_helper
->crtc_count
; i
++) {
430 crtc
= fb_helper
->crtc_info
[i
].mode_set
.crtc
;
435 /* Walk the connectors & encoders on this fb turning them on/off */
436 for (j
= 0; j
< fb_helper
->connector_count
; j
++) {
437 connector
= fb_helper
->connector_info
[j
]->connector
;
438 connector
->funcs
->dpms(connector
, dpms_mode
);
439 drm_object_property_set_value(&connector
->base
,
440 dev
->mode_config
.dpms_property
, dpms_mode
);
443 drm_modeset_unlock_all(dev
);
447 * drm_fb_helper_blank - implementation for ->fb_blank
448 * @blank: desired blanking state
449 * @info: fbdev registered by the helper
451 int drm_fb_helper_blank(int blank
, struct fb_info
*info
)
454 /* Display: On; HSync: On, VSync: On */
455 case FB_BLANK_UNBLANK
:
456 drm_fb_helper_dpms(info
, DRM_MODE_DPMS_ON
);
458 /* Display: Off; HSync: On, VSync: On */
459 case FB_BLANK_NORMAL
:
460 drm_fb_helper_dpms(info
, DRM_MODE_DPMS_STANDBY
);
462 /* Display: Off; HSync: Off, VSync: On */
463 case FB_BLANK_HSYNC_SUSPEND
:
464 drm_fb_helper_dpms(info
, DRM_MODE_DPMS_STANDBY
);
466 /* Display: Off; HSync: On, VSync: Off */
467 case FB_BLANK_VSYNC_SUSPEND
:
468 drm_fb_helper_dpms(info
, DRM_MODE_DPMS_SUSPEND
);
470 /* Display: Off; HSync: Off, VSync: Off */
471 case FB_BLANK_POWERDOWN
:
472 drm_fb_helper_dpms(info
, DRM_MODE_DPMS_OFF
);
477 EXPORT_SYMBOL(drm_fb_helper_blank
);
479 static void drm_fb_helper_crtc_free(struct drm_fb_helper
*helper
)
483 for (i
= 0; i
< helper
->connector_count
; i
++)
484 kfree(helper
->connector_info
[i
]);
485 kfree(helper
->connector_info
);
486 for (i
= 0; i
< helper
->crtc_count
; i
++) {
487 kfree(helper
->crtc_info
[i
].mode_set
.connectors
);
488 if (helper
->crtc_info
[i
].mode_set
.mode
)
489 drm_mode_destroy(helper
->dev
, helper
->crtc_info
[i
].mode_set
.mode
);
491 kfree(helper
->crtc_info
);
495 * drm_fb_helper_init - initialize a drm_fb_helper structure
497 * @fb_helper: driver-allocated fbdev helper structure to initialize
498 * @crtc_count: maximum number of crtcs to support in this fbdev emulation
499 * @max_conn_count: max connector count
501 * This allocates the structures for the fbdev helper with the given limits.
502 * Note that this won't yet touch the hardware (through the driver interfaces)
503 * nor register the fbdev. This is only done in drm_fb_helper_initial_config()
504 * to allow driver writes more control over the exact init sequence.
506 * Drivers must set fb_helper->funcs before calling
507 * drm_fb_helper_initial_config().
510 * Zero if everything went ok, nonzero otherwise.
512 int drm_fb_helper_init(struct drm_device
*dev
,
513 struct drm_fb_helper
*fb_helper
,
514 int crtc_count
, int max_conn_count
)
516 struct drm_crtc
*crtc
;
519 fb_helper
->dev
= dev
;
521 INIT_LIST_HEAD(&fb_helper
->kernel_fb_list
);
523 fb_helper
->crtc_info
= kcalloc(crtc_count
, sizeof(struct drm_fb_helper_crtc
), GFP_KERNEL
);
524 if (!fb_helper
->crtc_info
)
527 fb_helper
->crtc_count
= crtc_count
;
528 fb_helper
->connector_info
= kcalloc(dev
->mode_config
.num_connector
, sizeof(struct drm_fb_helper_connector
*), GFP_KERNEL
);
529 if (!fb_helper
->connector_info
) {
530 kfree(fb_helper
->crtc_info
);
533 fb_helper
->connector_count
= 0;
535 for (i
= 0; i
< crtc_count
; i
++) {
536 fb_helper
->crtc_info
[i
].mode_set
.connectors
=
537 kcalloc(max_conn_count
,
538 sizeof(struct drm_connector
*),
541 if (!fb_helper
->crtc_info
[i
].mode_set
.connectors
)
543 fb_helper
->crtc_info
[i
].mode_set
.num_connectors
= 0;
547 list_for_each_entry(crtc
, &dev
->mode_config
.crtc_list
, head
) {
548 fb_helper
->crtc_info
[i
].mode_set
.crtc
= crtc
;
554 drm_fb_helper_crtc_free(fb_helper
);
557 EXPORT_SYMBOL(drm_fb_helper_init
);
559 void drm_fb_helper_fini(struct drm_fb_helper
*fb_helper
)
561 if (!list_empty(&fb_helper
->kernel_fb_list
)) {
562 list_del(&fb_helper
->kernel_fb_list
);
563 if (list_empty(&kernel_fb_helper_list
)) {
564 pr_info("drm: unregistered panic notifier\n");
565 atomic_notifier_chain_unregister(&panic_notifier_list
,
567 unregister_sysrq_key('v', &sysrq_drm_fb_helper_restore_op
);
571 drm_fb_helper_crtc_free(fb_helper
);
574 EXPORT_SYMBOL(drm_fb_helper_fini
);
576 static int setcolreg(struct drm_crtc
*crtc
, u16 red
, u16 green
,
577 u16 blue
, u16 regno
, struct fb_info
*info
)
579 struct drm_fb_helper
*fb_helper
= info
->par
;
580 struct drm_framebuffer
*fb
= fb_helper
->fb
;
583 if (info
->fix
.visual
== FB_VISUAL_TRUECOLOR
) {
586 /* place color in psuedopalette */
589 palette
= (u32
*)info
->pseudo_palette
;
590 red
>>= (16 - info
->var
.red
.length
);
591 green
>>= (16 - info
->var
.green
.length
);
592 blue
>>= (16 - info
->var
.blue
.length
);
593 value
= (red
<< info
->var
.red
.offset
) |
594 (green
<< info
->var
.green
.offset
) |
595 (blue
<< info
->var
.blue
.offset
);
596 if (info
->var
.transp
.length
> 0) {
597 u32 mask
= (1 << info
->var
.transp
.length
) - 1;
598 mask
<<= info
->var
.transp
.offset
;
601 palette
[regno
] = value
;
606 * The driver really shouldn't advertise pseudo/directcolor
607 * visuals if it can't deal with the palette.
609 if (WARN_ON(!fb_helper
->funcs
->gamma_set
||
610 !fb_helper
->funcs
->gamma_get
))
615 if (fb
->bits_per_pixel
== 16) {
618 if (fb
->depth
== 16 && regno
> 63)
620 if (fb
->depth
== 15 && regno
> 31)
623 if (fb
->depth
== 16) {
627 for (i
= 0; i
< 8; i
++)
628 fb_helper
->funcs
->gamma_set(crtc
, red
,
629 green
, blue
, pindex
+ i
);
632 fb_helper
->funcs
->gamma_get(crtc
, &r
,
636 for (i
= 0; i
< 4; i
++)
637 fb_helper
->funcs
->gamma_set(crtc
, r
,
644 fb_helper
->funcs
->gamma_set(crtc
, red
, green
, blue
, pindex
);
649 * drm_fb_helper_setcmap - implementation for ->fb_setcmap
651 * @info: fbdev registered by the helper
653 int drm_fb_helper_setcmap(struct fb_cmap
*cmap
, struct fb_info
*info
)
655 struct drm_fb_helper
*fb_helper
= info
->par
;
656 struct drm_device
*dev
= fb_helper
->dev
;
657 struct drm_crtc_helper_funcs
*crtc_funcs
;
658 u16
*red
, *green
, *blue
, *transp
;
659 struct drm_crtc
*crtc
;
663 drm_modeset_lock_all(dev
);
664 if (!drm_fb_helper_is_bound(fb_helper
)) {
665 drm_modeset_unlock_all(dev
);
669 for (i
= 0; i
< fb_helper
->crtc_count
; i
++) {
670 crtc
= fb_helper
->crtc_info
[i
].mode_set
.crtc
;
671 crtc_funcs
= crtc
->helper_private
;
676 transp
= cmap
->transp
;
679 for (j
= 0; j
< cmap
->len
; j
++) {
680 u16 hred
, hgreen
, hblue
, htransp
= 0xffff;
689 rc
= setcolreg(crtc
, hred
, hgreen
, hblue
, start
++, info
);
693 if (crtc_funcs
->load_lut
)
694 crtc_funcs
->load_lut(crtc
);
697 drm_modeset_unlock_all(dev
);
700 EXPORT_SYMBOL(drm_fb_helper_setcmap
);
703 * drm_fb_helper_check_var - implementation for ->fb_check_var
704 * @var: screeninfo to check
705 * @info: fbdev registered by the helper
707 int drm_fb_helper_check_var(struct fb_var_screeninfo
*var
,
708 struct fb_info
*info
)
710 struct drm_fb_helper
*fb_helper
= info
->par
;
711 struct drm_framebuffer
*fb
= fb_helper
->fb
;
714 if (var
->pixclock
!= 0 || in_dbg_master())
717 /* Need to resize the fb object !!! */
718 if (var
->bits_per_pixel
> fb
->bits_per_pixel
||
719 var
->xres
> fb
->width
|| var
->yres
> fb
->height
||
720 var
->xres_virtual
> fb
->width
|| var
->yres_virtual
> fb
->height
) {
721 DRM_DEBUG("fb userspace requested width/height/bpp is greater than current fb "
722 "request %dx%d-%d (virtual %dx%d) > %dx%d-%d\n",
723 var
->xres
, var
->yres
, var
->bits_per_pixel
,
724 var
->xres_virtual
, var
->yres_virtual
,
725 fb
->width
, fb
->height
, fb
->bits_per_pixel
);
729 switch (var
->bits_per_pixel
) {
731 depth
= (var
->green
.length
== 6) ? 16 : 15;
734 depth
= (var
->transp
.length
> 0) ? 32 : 24;
737 depth
= var
->bits_per_pixel
;
744 var
->green
.offset
= 0;
745 var
->blue
.offset
= 0;
747 var
->green
.length
= 8;
748 var
->blue
.length
= 8;
749 var
->transp
.length
= 0;
750 var
->transp
.offset
= 0;
753 var
->red
.offset
= 10;
754 var
->green
.offset
= 5;
755 var
->blue
.offset
= 0;
757 var
->green
.length
= 5;
758 var
->blue
.length
= 5;
759 var
->transp
.length
= 1;
760 var
->transp
.offset
= 15;
763 var
->red
.offset
= 11;
764 var
->green
.offset
= 5;
765 var
->blue
.offset
= 0;
767 var
->green
.length
= 6;
768 var
->blue
.length
= 5;
769 var
->transp
.length
= 0;
770 var
->transp
.offset
= 0;
773 var
->red
.offset
= 16;
774 var
->green
.offset
= 8;
775 var
->blue
.offset
= 0;
777 var
->green
.length
= 8;
778 var
->blue
.length
= 8;
779 var
->transp
.length
= 0;
780 var
->transp
.offset
= 0;
783 var
->red
.offset
= 16;
784 var
->green
.offset
= 8;
785 var
->blue
.offset
= 0;
787 var
->green
.length
= 8;
788 var
->blue
.length
= 8;
789 var
->transp
.length
= 8;
790 var
->transp
.offset
= 24;
797 EXPORT_SYMBOL(drm_fb_helper_check_var
);
800 * drm_fb_helper_set_par - implementation for ->fb_set_par
801 * @info: fbdev registered by the helper
803 * This will let fbcon do the mode init and is called at initialization time by
804 * the fbdev core when registering the driver, and later on through the hotplug
807 int drm_fb_helper_set_par(struct fb_info
*info
)
809 struct drm_fb_helper
*fb_helper
= info
->par
;
810 struct drm_device
*dev
= fb_helper
->dev
;
811 struct fb_var_screeninfo
*var
= &info
->var
;
813 if (var
->pixclock
!= 0) {
814 DRM_ERROR("PIXEL CLOCK SET\n");
818 drm_modeset_lock_all(dev
);
819 drm_fb_helper_restore_fbdev_mode(fb_helper
);
820 drm_modeset_unlock_all(dev
);
822 if (fb_helper
->delayed_hotplug
) {
823 fb_helper
->delayed_hotplug
= false;
824 drm_fb_helper_hotplug_event(fb_helper
);
828 EXPORT_SYMBOL(drm_fb_helper_set_par
);
831 * drm_fb_helper_pan_display - implementation for ->fb_pan_display
832 * @var: updated screen information
833 * @info: fbdev registered by the helper
835 int drm_fb_helper_pan_display(struct fb_var_screeninfo
*var
,
836 struct fb_info
*info
)
838 struct drm_fb_helper
*fb_helper
= info
->par
;
839 struct drm_device
*dev
= fb_helper
->dev
;
840 struct drm_mode_set
*modeset
;
844 drm_modeset_lock_all(dev
);
845 if (!drm_fb_helper_is_bound(fb_helper
)) {
846 drm_modeset_unlock_all(dev
);
850 for (i
= 0; i
< fb_helper
->crtc_count
; i
++) {
851 modeset
= &fb_helper
->crtc_info
[i
].mode_set
;
853 modeset
->x
= var
->xoffset
;
854 modeset
->y
= var
->yoffset
;
856 if (modeset
->num_connectors
) {
857 ret
= drm_mode_set_config_internal(modeset
);
859 info
->var
.xoffset
= var
->xoffset
;
860 info
->var
.yoffset
= var
->yoffset
;
864 drm_modeset_unlock_all(dev
);
867 EXPORT_SYMBOL(drm_fb_helper_pan_display
);
870 * Allocates the backing storage and sets up the fbdev info structure through
871 * the ->fb_probe callback and then registers the fbdev and sets up the panic
874 static int drm_fb_helper_single_fb_probe(struct drm_fb_helper
*fb_helper
,
880 struct fb_info
*info
;
881 struct drm_fb_helper_surface_size sizes
;
884 memset(&sizes
, 0, sizeof(struct drm_fb_helper_surface_size
));
885 sizes
.surface_depth
= 24;
886 sizes
.surface_bpp
= 32;
887 sizes
.fb_width
= (unsigned)-1;
888 sizes
.fb_height
= (unsigned)-1;
890 /* if driver picks 8 or 16 by default use that
891 for both depth/bpp */
892 if (preferred_bpp
!= sizes
.surface_bpp
)
893 sizes
.surface_depth
= sizes
.surface_bpp
= preferred_bpp
;
895 /* first up get a count of crtcs now in use and new min/maxes width/heights */
896 for (i
= 0; i
< fb_helper
->connector_count
; i
++) {
897 struct drm_fb_helper_connector
*fb_helper_conn
= fb_helper
->connector_info
[i
];
898 struct drm_cmdline_mode
*cmdline_mode
;
900 cmdline_mode
= &fb_helper_conn
->cmdline_mode
;
902 if (cmdline_mode
->bpp_specified
) {
903 switch (cmdline_mode
->bpp
) {
905 sizes
.surface_depth
= sizes
.surface_bpp
= 8;
908 sizes
.surface_depth
= 15;
909 sizes
.surface_bpp
= 16;
912 sizes
.surface_depth
= sizes
.surface_bpp
= 16;
915 sizes
.surface_depth
= sizes
.surface_bpp
= 24;
918 sizes
.surface_depth
= 24;
919 sizes
.surface_bpp
= 32;
927 for (i
= 0; i
< fb_helper
->crtc_count
; i
++) {
928 struct drm_display_mode
*desired_mode
;
929 desired_mode
= fb_helper
->crtc_info
[i
].desired_mode
;
933 gamma_size
= fb_helper
->crtc_info
[i
].mode_set
.crtc
->gamma_size
;
934 if (desired_mode
->hdisplay
< sizes
.fb_width
)
935 sizes
.fb_width
= desired_mode
->hdisplay
;
936 if (desired_mode
->vdisplay
< sizes
.fb_height
)
937 sizes
.fb_height
= desired_mode
->vdisplay
;
938 if (desired_mode
->hdisplay
> sizes
.surface_width
)
939 sizes
.surface_width
= desired_mode
->hdisplay
;
940 if (desired_mode
->vdisplay
> sizes
.surface_height
)
941 sizes
.surface_height
= desired_mode
->vdisplay
;
946 if (crtc_count
== 0 || sizes
.fb_width
== -1 || sizes
.fb_height
== -1) {
947 /* hmm everyone went away - assume VGA cable just fell out
948 and will come back later. */
949 DRM_INFO("Cannot find any crtc or sizes - going 1024x768\n");
950 sizes
.fb_width
= sizes
.surface_width
= 1024;
951 sizes
.fb_height
= sizes
.surface_height
= 768;
954 /* push down into drivers */
955 ret
= (*fb_helper
->funcs
->fb_probe
)(fb_helper
, &sizes
);
959 info
= fb_helper
->fbdev
;
962 * Set the fb pointer - usually drm_setup_crtcs does this for hotplug
963 * events, but at init time drm_setup_crtcs needs to be called before
964 * the fb is allocated (since we need to figure out the desired size of
965 * the fb before we can allocate it ...). Hence we need to fix things up
968 for (i
= 0; i
< fb_helper
->crtc_count
; i
++)
969 if (fb_helper
->crtc_info
[i
].mode_set
.num_connectors
)
970 fb_helper
->crtc_info
[i
].mode_set
.fb
= fb_helper
->fb
;
973 info
->var
.pixclock
= 0;
974 if (register_framebuffer(info
) < 0)
977 dev_info(fb_helper
->dev
->dev
, "fb%d: %s frame buffer device\n",
978 info
->node
, info
->fix
.id
);
980 /* Switch back to kernel console on panic */
981 /* multi card linked list maybe */
982 if (list_empty(&kernel_fb_helper_list
)) {
983 dev_info(fb_helper
->dev
->dev
, "registered panic notifier\n");
984 atomic_notifier_chain_register(&panic_notifier_list
,
986 register_sysrq_key('v', &sysrq_drm_fb_helper_restore_op
);
989 list_add(&fb_helper
->kernel_fb_list
, &kernel_fb_helper_list
);
995 * drm_fb_helper_fill_fix - initializes fixed fbdev information
996 * @info: fbdev registered by the helper
997 * @pitch: desired pitch
998 * @depth: desired depth
1000 * Helper to fill in the fixed fbdev information useful for a non-accelerated
1001 * fbdev emulations. Drivers which support acceleration methods which impose
1002 * additional constraints need to set up their own limits.
1004 * Drivers should call this (or their equivalent setup code) from their
1005 * ->fb_probe callback.
1007 void drm_fb_helper_fill_fix(struct fb_info
*info
, uint32_t pitch
,
1010 info
->fix
.type
= FB_TYPE_PACKED_PIXELS
;
1011 info
->fix
.visual
= depth
== 8 ? FB_VISUAL_PSEUDOCOLOR
:
1012 FB_VISUAL_TRUECOLOR
;
1013 info
->fix
.mmio_start
= 0;
1014 info
->fix
.mmio_len
= 0;
1015 info
->fix
.type_aux
= 0;
1016 info
->fix
.xpanstep
= 1; /* doing it in hw */
1017 info
->fix
.ypanstep
= 1; /* doing it in hw */
1018 info
->fix
.ywrapstep
= 0;
1019 info
->fix
.accel
= FB_ACCEL_NONE
;
1020 info
->fix
.type_aux
= 0;
1022 info
->fix
.line_length
= pitch
;
1025 EXPORT_SYMBOL(drm_fb_helper_fill_fix
);
1028 * drm_fb_helper_fill_var - initalizes variable fbdev information
1029 * @info: fbdev instance to set up
1030 * @fb_helper: fb helper instance to use as template
1031 * @fb_width: desired fb width
1032 * @fb_height: desired fb height
1034 * Sets up the variable fbdev metainformation from the given fb helper instance
1035 * and the drm framebuffer allocated in fb_helper->fb.
1037 * Drivers should call this (or their equivalent setup code) from their
1038 * ->fb_probe callback after having allocated the fbdev backing
1039 * storage framebuffer.
1041 void drm_fb_helper_fill_var(struct fb_info
*info
, struct drm_fb_helper
*fb_helper
,
1042 uint32_t fb_width
, uint32_t fb_height
)
1044 struct drm_framebuffer
*fb
= fb_helper
->fb
;
1045 info
->pseudo_palette
= fb_helper
->pseudo_palette
;
1046 info
->var
.xres_virtual
= fb
->width
;
1047 info
->var
.yres_virtual
= fb
->height
;
1048 info
->var
.bits_per_pixel
= fb
->bits_per_pixel
;
1049 info
->var
.accel_flags
= FB_ACCELF_TEXT
;
1050 info
->var
.xoffset
= 0;
1051 info
->var
.yoffset
= 0;
1052 info
->var
.activate
= FB_ACTIVATE_NOW
;
1053 info
->var
.height
= -1;
1054 info
->var
.width
= -1;
1056 switch (fb
->depth
) {
1058 info
->var
.red
.offset
= 0;
1059 info
->var
.green
.offset
= 0;
1060 info
->var
.blue
.offset
= 0;
1061 info
->var
.red
.length
= 8; /* 8bit DAC */
1062 info
->var
.green
.length
= 8;
1063 info
->var
.blue
.length
= 8;
1064 info
->var
.transp
.offset
= 0;
1065 info
->var
.transp
.length
= 0;
1068 info
->var
.red
.offset
= 10;
1069 info
->var
.green
.offset
= 5;
1070 info
->var
.blue
.offset
= 0;
1071 info
->var
.red
.length
= 5;
1072 info
->var
.green
.length
= 5;
1073 info
->var
.blue
.length
= 5;
1074 info
->var
.transp
.offset
= 15;
1075 info
->var
.transp
.length
= 1;
1078 info
->var
.red
.offset
= 11;
1079 info
->var
.green
.offset
= 5;
1080 info
->var
.blue
.offset
= 0;
1081 info
->var
.red
.length
= 5;
1082 info
->var
.green
.length
= 6;
1083 info
->var
.blue
.length
= 5;
1084 info
->var
.transp
.offset
= 0;
1087 info
->var
.red
.offset
= 16;
1088 info
->var
.green
.offset
= 8;
1089 info
->var
.blue
.offset
= 0;
1090 info
->var
.red
.length
= 8;
1091 info
->var
.green
.length
= 8;
1092 info
->var
.blue
.length
= 8;
1093 info
->var
.transp
.offset
= 0;
1094 info
->var
.transp
.length
= 0;
1097 info
->var
.red
.offset
= 16;
1098 info
->var
.green
.offset
= 8;
1099 info
->var
.blue
.offset
= 0;
1100 info
->var
.red
.length
= 8;
1101 info
->var
.green
.length
= 8;
1102 info
->var
.blue
.length
= 8;
1103 info
->var
.transp
.offset
= 24;
1104 info
->var
.transp
.length
= 8;
1110 info
->var
.xres
= fb_width
;
1111 info
->var
.yres
= fb_height
;
1113 EXPORT_SYMBOL(drm_fb_helper_fill_var
);
1115 static int drm_fb_helper_probe_connector_modes(struct drm_fb_helper
*fb_helper
,
1119 struct drm_connector
*connector
;
1123 for (i
= 0; i
< fb_helper
->connector_count
; i
++) {
1124 connector
= fb_helper
->connector_info
[i
]->connector
;
1125 count
+= connector
->funcs
->fill_modes(connector
, maxX
, maxY
);
1131 static struct drm_display_mode
*drm_has_preferred_mode(struct drm_fb_helper_connector
*fb_connector
, int width
, int height
)
1133 struct drm_display_mode
*mode
;
1135 list_for_each_entry(mode
, &fb_connector
->connector
->modes
, head
) {
1136 if (drm_mode_width(mode
) > width
||
1137 drm_mode_height(mode
) > height
)
1139 if (mode
->type
& DRM_MODE_TYPE_PREFERRED
)
1145 static bool drm_has_cmdline_mode(struct drm_fb_helper_connector
*fb_connector
)
1147 struct drm_cmdline_mode
*cmdline_mode
;
1148 cmdline_mode
= &fb_connector
->cmdline_mode
;
1149 return cmdline_mode
->specified
;
1152 static struct drm_display_mode
*drm_pick_cmdline_mode(struct drm_fb_helper_connector
*fb_helper_conn
,
1153 int width
, int height
)
1155 struct drm_cmdline_mode
*cmdline_mode
;
1156 struct drm_display_mode
*mode
= NULL
;
1158 cmdline_mode
= &fb_helper_conn
->cmdline_mode
;
1159 if (cmdline_mode
->specified
== false)
1162 /* attempt to find a matching mode in the list of modes
1163 * we have gotten so far, if not add a CVT mode that conforms
1165 if (cmdline_mode
->rb
|| cmdline_mode
->margins
)
1168 list_for_each_entry(mode
, &fb_helper_conn
->connector
->modes
, head
) {
1169 /* check width/height */
1170 if (mode
->hdisplay
!= cmdline_mode
->xres
||
1171 mode
->vdisplay
!= cmdline_mode
->yres
)
1174 if (cmdline_mode
->refresh_specified
) {
1175 if (mode
->vrefresh
!= cmdline_mode
->refresh
)
1179 if (cmdline_mode
->interlace
) {
1180 if (!(mode
->flags
& DRM_MODE_FLAG_INTERLACE
))
1187 mode
= drm_mode_create_from_cmdline_mode(fb_helper_conn
->connector
->dev
,
1189 list_add(&mode
->head
, &fb_helper_conn
->connector
->modes
);
1193 static bool drm_connector_enabled(struct drm_connector
*connector
, bool strict
)
1198 enable
= connector
->status
== connector_status_connected
;
1200 enable
= connector
->status
!= connector_status_disconnected
;
1205 static void drm_enable_connectors(struct drm_fb_helper
*fb_helper
,
1208 bool any_enabled
= false;
1209 struct drm_connector
*connector
;
1212 for (i
= 0; i
< fb_helper
->connector_count
; i
++) {
1213 connector
= fb_helper
->connector_info
[i
]->connector
;
1214 enabled
[i
] = drm_connector_enabled(connector
, true);
1215 DRM_DEBUG_KMS("connector %d enabled? %s\n", connector
->base
.id
,
1216 enabled
[i
] ? "yes" : "no");
1217 any_enabled
|= enabled
[i
];
1223 for (i
= 0; i
< fb_helper
->connector_count
; i
++) {
1224 connector
= fb_helper
->connector_info
[i
]->connector
;
1225 enabled
[i
] = drm_connector_enabled(connector
, false);
1229 static bool drm_target_cloned(struct drm_fb_helper
*fb_helper
,
1230 struct drm_display_mode
**modes
,
1231 bool *enabled
, int width
, int height
)
1234 bool can_clone
= false;
1235 struct drm_fb_helper_connector
*fb_helper_conn
;
1236 struct drm_display_mode
*dmt_mode
, *mode
;
1238 /* only contemplate cloning in the single crtc case */
1239 if (fb_helper
->crtc_count
> 1)
1243 for (i
= 0; i
< fb_helper
->connector_count
; i
++) {
1248 /* only contemplate cloning if more than one connector is enabled */
1252 /* check the command line or if nothing common pick 1024x768 */
1254 for (i
= 0; i
< fb_helper
->connector_count
; i
++) {
1257 fb_helper_conn
= fb_helper
->connector_info
[i
];
1258 modes
[i
] = drm_pick_cmdline_mode(fb_helper_conn
, width
, height
);
1263 for (j
= 0; j
< i
; j
++) {
1266 if (!drm_mode_equal(modes
[j
], modes
[i
]))
1272 DRM_DEBUG_KMS("can clone using command line\n");
1276 /* try and find a 1024x768 mode on each connector */
1278 dmt_mode
= drm_mode_find_dmt(fb_helper
->dev
, 1024, 768, 60, false);
1280 for (i
= 0; i
< fb_helper
->connector_count
; i
++) {
1285 fb_helper_conn
= fb_helper
->connector_info
[i
];
1286 list_for_each_entry(mode
, &fb_helper_conn
->connector
->modes
, head
) {
1287 if (drm_mode_equal(mode
, dmt_mode
))
1295 DRM_DEBUG_KMS("can clone using 1024x768\n");
1298 DRM_INFO("kms: can't enable cloning when we probably wanted to.\n");
1302 static bool drm_target_preferred(struct drm_fb_helper
*fb_helper
,
1303 struct drm_display_mode
**modes
,
1304 bool *enabled
, int width
, int height
)
1306 struct drm_fb_helper_connector
*fb_helper_conn
;
1309 for (i
= 0; i
< fb_helper
->connector_count
; i
++) {
1310 fb_helper_conn
= fb_helper
->connector_info
[i
];
1312 if (enabled
[i
] == false)
1315 DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
1316 fb_helper_conn
->connector
->base
.id
);
1318 /* got for command line mode first */
1319 modes
[i
] = drm_pick_cmdline_mode(fb_helper_conn
, width
, height
);
1321 DRM_DEBUG_KMS("looking for preferred mode on connector %d\n",
1322 fb_helper_conn
->connector
->base
.id
);
1323 modes
[i
] = drm_has_preferred_mode(fb_helper_conn
, width
, height
);
1325 /* No preferred modes, pick one off the list */
1326 if (!modes
[i
] && !list_empty(&fb_helper_conn
->connector
->modes
)) {
1327 list_for_each_entry(modes
[i
], &fb_helper_conn
->connector
->modes
, head
)
1330 DRM_DEBUG_KMS("found mode %s\n", modes
[i
] ? modes
[i
]->name
:
1336 static int drm_pick_crtcs(struct drm_fb_helper
*fb_helper
,
1337 struct drm_fb_helper_crtc
**best_crtcs
,
1338 struct drm_display_mode
**modes
,
1339 int n
, int width
, int height
)
1342 struct drm_device
*dev
= fb_helper
->dev
;
1343 struct drm_connector
*connector
;
1344 struct drm_connector_helper_funcs
*connector_funcs
;
1345 struct drm_encoder
*encoder
;
1346 int my_score
, best_score
, score
;
1347 struct drm_fb_helper_crtc
**crtcs
, *crtc
;
1348 struct drm_fb_helper_connector
*fb_helper_conn
;
1350 if (n
== fb_helper
->connector_count
)
1353 fb_helper_conn
= fb_helper
->connector_info
[n
];
1354 connector
= fb_helper_conn
->connector
;
1356 best_crtcs
[n
] = NULL
;
1357 best_score
= drm_pick_crtcs(fb_helper
, best_crtcs
, modes
, n
+1, width
, height
);
1358 if (modes
[n
] == NULL
)
1361 crtcs
= kzalloc(dev
->mode_config
.num_connector
*
1362 sizeof(struct drm_fb_helper_crtc
*), GFP_KERNEL
);
1367 if (connector
->status
== connector_status_connected
)
1369 if (drm_has_cmdline_mode(fb_helper_conn
))
1371 if (drm_has_preferred_mode(fb_helper_conn
, width
, height
))
1374 connector_funcs
= connector
->helper_private
;
1375 encoder
= connector_funcs
->best_encoder(connector
);
1379 /* select a crtc for this connector and then attempt to configure
1380 remaining connectors */
1381 for (c
= 0; c
< fb_helper
->crtc_count
; c
++) {
1382 crtc
= &fb_helper
->crtc_info
[c
];
1384 if ((encoder
->possible_crtcs
& (1 << c
)) == 0)
1387 for (o
= 0; o
< n
; o
++)
1388 if (best_crtcs
[o
] == crtc
)
1392 /* ignore cloning unless only a single crtc */
1393 if (fb_helper
->crtc_count
> 1)
1396 if (!drm_mode_equal(modes
[o
], modes
[n
]))
1401 memcpy(crtcs
, best_crtcs
, n
* sizeof(struct drm_fb_helper_crtc
*));
1402 score
= my_score
+ drm_pick_crtcs(fb_helper
, crtcs
, modes
, n
+ 1,
1404 if (score
> best_score
) {
1406 memcpy(best_crtcs
, crtcs
,
1407 dev
->mode_config
.num_connector
*
1408 sizeof(struct drm_fb_helper_crtc
*));
1416 static void drm_setup_crtcs(struct drm_fb_helper
*fb_helper
)
1418 struct drm_device
*dev
= fb_helper
->dev
;
1419 struct drm_fb_helper_crtc
**crtcs
;
1420 struct drm_display_mode
**modes
;
1421 struct drm_mode_set
*modeset
;
1426 DRM_DEBUG_KMS("\n");
1428 width
= dev
->mode_config
.max_width
;
1429 height
= dev
->mode_config
.max_height
;
1431 crtcs
= kcalloc(dev
->mode_config
.num_connector
,
1432 sizeof(struct drm_fb_helper_crtc
*), GFP_KERNEL
);
1433 modes
= kcalloc(dev
->mode_config
.num_connector
,
1434 sizeof(struct drm_display_mode
*), GFP_KERNEL
);
1435 enabled
= kcalloc(dev
->mode_config
.num_connector
,
1436 sizeof(bool), GFP_KERNEL
);
1437 if (!crtcs
|| !modes
|| !enabled
) {
1438 DRM_ERROR("Memory allocation failed\n");
1443 drm_enable_connectors(fb_helper
, enabled
);
1445 if (!(fb_helper
->funcs
->initial_config
&&
1446 fb_helper
->funcs
->initial_config(fb_helper
, crtcs
, modes
,
1447 enabled
, width
, height
))) {
1448 memset(modes
, 0, dev
->mode_config
.num_connector
*sizeof(modes
[0]));
1449 memset(crtcs
, 0, dev
->mode_config
.num_connector
*sizeof(crtcs
[0]));
1451 if (!drm_target_cloned(fb_helper
,
1452 modes
, enabled
, width
, height
) &&
1453 !drm_target_preferred(fb_helper
,
1454 modes
, enabled
, width
, height
))
1455 DRM_ERROR("Unable to find initial modes\n");
1457 DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n",
1460 drm_pick_crtcs(fb_helper
, crtcs
, modes
, 0, width
, height
);
1463 /* need to set the modesets up here for use later */
1464 /* fill out the connector<->crtc mappings into the modesets */
1465 for (i
= 0; i
< fb_helper
->crtc_count
; i
++) {
1466 modeset
= &fb_helper
->crtc_info
[i
].mode_set
;
1467 modeset
->num_connectors
= 0;
1471 for (i
= 0; i
< fb_helper
->connector_count
; i
++) {
1472 struct drm_display_mode
*mode
= modes
[i
];
1473 struct drm_fb_helper_crtc
*fb_crtc
= crtcs
[i
];
1474 modeset
= &fb_crtc
->mode_set
;
1476 if (mode
&& fb_crtc
) {
1477 DRM_DEBUG_KMS("desired mode %s set on crtc %d\n",
1478 mode
->name
, fb_crtc
->mode_set
.crtc
->base
.id
);
1479 fb_crtc
->desired_mode
= mode
;
1481 drm_mode_destroy(dev
, modeset
->mode
);
1482 modeset
->mode
= drm_mode_duplicate(dev
,
1483 fb_crtc
->desired_mode
);
1484 modeset
->connectors
[modeset
->num_connectors
++] = fb_helper
->connector_info
[i
]->connector
;
1485 modeset
->fb
= fb_helper
->fb
;
1489 /* Clear out any old modes if there are no more connected outputs. */
1490 for (i
= 0; i
< fb_helper
->crtc_count
; i
++) {
1491 modeset
= &fb_helper
->crtc_info
[i
].mode_set
;
1492 if (modeset
->num_connectors
== 0) {
1493 BUG_ON(modeset
->fb
);
1494 BUG_ON(modeset
->num_connectors
);
1496 drm_mode_destroy(dev
, modeset
->mode
);
1497 modeset
->mode
= NULL
;
1507 * drm_fb_helper_initial_config - setup a sane initial connector configuration
1508 * @fb_helper: fb_helper device struct
1509 * @bpp_sel: bpp value to use for the framebuffer configuration
1511 * Scans the CRTCs and connectors and tries to put together an initial setup.
1512 * At the moment, this is a cloned configuration across all heads with
1513 * a new framebuffer object as the backing store.
1515 * Note that this also registers the fbdev and so allows userspace to call into
1516 * the driver through the fbdev interfaces.
1518 * This function will call down into the ->fb_probe callback to let
1519 * the driver allocate and initialize the fbdev info structure and the drm
1520 * framebuffer used to back the fbdev. drm_fb_helper_fill_var() and
1521 * drm_fb_helper_fill_fix() are provided as helpers to setup simple default
1522 * values for the fbdev info structure.
1525 * Zero if everything went ok, nonzero otherwise.
1527 bool drm_fb_helper_initial_config(struct drm_fb_helper
*fb_helper
, int bpp_sel
)
1529 struct drm_device
*dev
= fb_helper
->dev
;
1532 drm_fb_helper_parse_command_line(fb_helper
);
1534 count
= drm_fb_helper_probe_connector_modes(fb_helper
,
1535 dev
->mode_config
.max_width
,
1536 dev
->mode_config
.max_height
);
1538 * we shouldn't end up with no modes here.
1541 dev_info(fb_helper
->dev
->dev
, "No connectors reported connected with modes\n");
1543 drm_setup_crtcs(fb_helper
);
1545 return drm_fb_helper_single_fb_probe(fb_helper
, bpp_sel
);
1547 EXPORT_SYMBOL(drm_fb_helper_initial_config
);
1550 * drm_fb_helper_hotplug_event - respond to a hotplug notification by
1551 * probing all the outputs attached to the fb
1552 * @fb_helper: the drm_fb_helper
1554 * Scan the connectors attached to the fb_helper and try to put together a
1555 * setup after *notification of a change in output configuration.
1557 * Called at runtime, takes the mode config locks to be able to check/change the
1558 * modeset configuration. Must be run from process context (which usually means
1559 * either the output polling work or a work item launched from the driver's
1560 * hotplug interrupt).
1562 * Note that the driver must ensure that this is only called _after_ the fb has
1563 * been fully set up, i.e. after the call to drm_fb_helper_initial_config.
1566 * 0 on success and a non-zero error code otherwise.
1568 int drm_fb_helper_hotplug_event(struct drm_fb_helper
*fb_helper
)
1570 struct drm_device
*dev
= fb_helper
->dev
;
1571 u32 max_width
, max_height
;
1576 mutex_lock(&fb_helper
->dev
->mode_config
.mutex
);
1577 if (!drm_fb_helper_is_bound(fb_helper
)) {
1578 fb_helper
->delayed_hotplug
= true;
1579 mutex_unlock(&fb_helper
->dev
->mode_config
.mutex
);
1582 DRM_DEBUG_KMS("\n");
1584 max_width
= fb_helper
->fb
->width
;
1585 max_height
= fb_helper
->fb
->height
;
1587 drm_fb_helper_probe_connector_modes(fb_helper
, max_width
, max_height
);
1588 mutex_unlock(&fb_helper
->dev
->mode_config
.mutex
);
1590 drm_modeset_lock_all(dev
);
1591 drm_setup_crtcs(fb_helper
);
1592 drm_modeset_unlock_all(dev
);
1593 drm_fb_helper_set_par(fb_helper
->fbdev
);
1597 EXPORT_SYMBOL(drm_fb_helper_hotplug_event
);
1599 /* The Kconfig DRM_KMS_HELPER selects FRAMEBUFFER_CONSOLE (if !EXPERT)
1600 * but the module doesn't depend on any fb console symbols. At least
1601 * attempt to load fbcon to avoid leaving the system without a usable console.
1603 #if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EXPERT)
1604 static int __init
drm_fb_helper_modinit(void)
1606 const char *name
= "fbcon";
1607 struct module
*fbcon
;
1609 mutex_lock(&module_mutex
);
1610 fbcon
= find_module(name
);
1611 mutex_unlock(&module_mutex
);
1614 request_module_nowait(name
);
1618 module_init(drm_fb_helper_modinit
);