drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config HWMON_DEBUG_CHIP
  32         bool "Hardware Monitoring Chip debugging messages"
  33         default n
  34         help
  35           Say Y here if you want the I2C chip drivers to produce a bunch of
  36           debug messages to the system log.  Select this if you are having
  37           a problem with I2C support and want to see more of what is going
  38           on.
  39
  40 comment "Native drivers"
  41
  42 config SENSORS_ABITUGURU
  43         tristate "Abit uGuru (rev 1 & 2)"
  44         depends on X86 && EXPERIMENTAL
  45         help
  46           If you say yes here you get support for the sensor part of the first
  47           and second revision of the Abit uGuru chip. The voltage and frequency
  48           control parts of the Abit uGuru are not supported. The Abit uGuru
  49           chip can be found on Abit uGuru featuring motherboards (most modern
  50           Abit motherboards from before end 2005). For more info and a list
  51           of which motherboards have which revision see
  52           Documentation/hwmon/abituguru
  53
  54           This driver can also be built as a module.  If so, the module
  55           will be called abituguru.
  56
  57 config SENSORS_ABITUGURU3
  58         tristate "Abit uGuru (rev 3)"
  59         depends on X86 && EXPERIMENTAL
  60         help
  61           If you say yes here you get support for the sensor part of the
  62           third revision of the Abit uGuru chip. Only reading the sensors
  63           and their settings is supported. The third revision of the Abit
  64           uGuru chip can be found on recent Abit motherboards (since end
  65           2005). For more info and a list of which motherboards have which
  66           revision see Documentation/hwmon/abituguru3
  67
  68           This driver can also be built as a module.  If so, the module
  69           will be called abituguru3.
  70
  71 config SENSORS_AD7414
  72         tristate "Analog Devices AD7414"
  73         depends on I2C && EXPERIMENTAL
  74         help
  75           If you say yes here you get support for the Analog Devices
  76           AD7414 temperature monitoring chip.
  77
  78           This driver can also be built as a module. If so, the module
  79           will be called ad7414.
  80
  81 config SENSORS_AD7418
  82         tristate "Analog Devices AD7416, AD7417 and AD7418"
  83         depends on I2C && EXPERIMENTAL
  84         help
  85           If you say yes here you get support for the Analog Devices
  86           AD7416, AD7417 and AD7418 temperature monitoring chips.
  87
  88           This driver can also be built as a module. If so, the module
  89           will be called ad7418.
  90
  91 config SENSORS_ADCXX
  92         tristate "National Semiconductor ADCxxxSxxx"
  93         depends on SPI_MASTER && EXPERIMENTAL
  94         help
  95           If you say yes here you get support for the National Semiconductor
  96           ADC<bb><c>S<sss> chip family, where
  97           * bb  is the resolution in number of bits (8, 10, 12)
  98           * c   is the number of channels (1, 2, 4, 8)
  99           * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 100             kSPS and 101 for 1 MSPS)
 101
 102           Examples : ADC081S101, ADC124S501, ...
 103
 104           This driver can also be built as a module.  If so, the module
 105           will be called adcxx.
 106
 107 config SENSORS_ADM1021
 108         tristate "Analog Devices ADM1021 and compatibles"
 109         depends on I2C
 110         help
 111           If you say yes here you get support for Analog Devices ADM1021
 112           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 113           Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 114
 115           This driver can also be built as a module.  If so, the module
 116           will be called adm1021.
 117
 118 config SENSORS_ADM1025
 119         tristate "Analog Devices ADM1025 and compatibles"
 120         depends on I2C
 121         select HWMON_VID
 122         help
 123           If you say yes here you get support for Analog Devices ADM1025
 124           and Philips NE1619 sensor chips.
 125
 126           This driver can also be built as a module.  If so, the module
 127           will be called adm1025.
 128
 129 config SENSORS_ADM1026
 130         tristate "Analog Devices ADM1026 and compatibles"
 131         depends on I2C
 132         select HWMON_VID
 133         help
 134           If you say yes here you get support for Analog Devices ADM1026
 135           sensor chip.
 136
 137           This driver can also be built as a module.  If so, the module
 138           will be called adm1026.
 139
 140 config SENSORS_ADM1029
 141         tristate "Analog Devices ADM1029"
 142         depends on I2C
 143         help
 144           If you say yes here you get support for Analog Devices ADM1029
 145           sensor chip.
 146           Very rare chip, please let us know you use it.
 147
 148           This driver can also be built as a module.  If so, the module
 149           will be called adm1029.
 150
 151 config SENSORS_ADM1031
 152         tristate "Analog Devices ADM1031 and compatibles"
 153         depends on I2C
 154         help
 155           If you say yes here you get support for Analog Devices ADM1031
 156           and ADM1030 sensor chips.
 157
 158           This driver can also be built as a module.  If so, the module
 159           will be called adm1031.
 160
 161 config SENSORS_ADM9240
 162         tristate "Analog Devices ADM9240 and compatibles"
 163         depends on I2C
 164         select HWMON_VID
 165         help
 166           If you say yes here you get support for Analog Devices ADM9240,
 167           Dallas DS1780, National Semiconductor LM81 sensor chips.
 168
 169           This driver can also be built as a module.  If so, the module
 170           will be called adm9240.
 171
 172 config SENSORS_ADT7411
 173         tristate "Analog Devices ADT7411"
 174         depends on I2C && EXPERIMENTAL
 175         help
 176           If you say yes here you get support for the Analog Devices
 177           ADT7411 voltage and temperature monitoring chip.
 178
 179           This driver can also be built as a module. If so, the module
 180           will be called adt7411.
 181
 182 config SENSORS_ADT7462
 183         tristate "Analog Devices ADT7462"
 184         depends on I2C && EXPERIMENTAL
 185         help
 186           If you say yes here you get support for the Analog Devices
 187           ADT7462 temperature monitoring chips.
 188
 189           This driver can also be built as a module. If so, the module
 190           will be called adt7462.
 191
 192 config SENSORS_ADT7470
 193         tristate "Analog Devices ADT7470"
 194         depends on I2C && EXPERIMENTAL
 195         help
 196           If you say yes here you get support for the Analog Devices
 197           ADT7470 temperature monitoring chips.
 198
 199           This driver can also be built as a module. If so, the module
 200           will be called adt7470.
 201
 202 config SENSORS_ADT7475
 203         tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 204         depends on I2C
 205         select HWMON_VID
 206         help
 207           If you say yes here you get support for the Analog Devices
 208           ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 209           chips.
 210
 211           This driver can also be build as a module.  If so, the module
 212           will be called adt7475.
 213
 214 config SENSORS_ASC7621
 215         tristate "Andigilog aSC7621"
 216         depends on HWMON && I2C
 217         help
 218           If you say yes here you get support for the aSC7621
 219           family of SMBus sensors chip found on most Intel X38, X48, X58,
 220           945, 965 and 975 desktop boards.  Currently supported chips:
 221           aSC7621
 222           aSC7621a
 223
 224           This driver can also be built as a module.  If so, the module
 225           will be called asc7621.
 226
 227 config SENSORS_K8TEMP
 228         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 229         depends on X86 && PCI && EXPERIMENTAL
 230         help
 231           If you say yes here you get support for the temperature
 232           sensor(s) inside your CPU. Supported is whole AMD K8
 233           microarchitecture. Please note that you will need at least
 234           lm-sensors 2.10.1 for proper userspace support.
 235
 236           This driver can also be built as a module.  If so, the module
 237           will be called k8temp.
 238
 239 config SENSORS_K10TEMP
 240         tristate "AMD Family 10h+ temperature sensor"
 241         depends on X86 && PCI
 242         help
 243           If you say yes here you get support for the temperature
 244           sensor(s) inside your CPU. Supported are later revisions of
 245           the AMD Family 10h and all revisions of the AMD Family 11h,
 246           12h (Llano), 14h (Brazos) and 15h (Bulldozer) microarchitectures.
 247
 248           This driver can also be built as a module.  If so, the module
 249           will be called k10temp.
 250
 251 config SENSORS_ASB100
 252         tristate "Asus ASB100 Bach"
 253         depends on X86 && I2C && EXPERIMENTAL
 254         select HWMON_VID
 255         help
 256           If you say yes here you get support for the ASB100 Bach sensor
 257           chip found on some Asus mainboards.
 258
 259           This driver can also be built as a module.  If so, the module
 260           will be called asb100.
 261
 262 config SENSORS_ATXP1
 263         tristate "Attansic ATXP1 VID controller"
 264         depends on I2C && EXPERIMENTAL
 265         select HWMON_VID
 266         help
 267           If you say yes here you get support for the Attansic ATXP1 VID
 268           controller.
 269
 270           If your board have such a chip, you are able to control your CPU
 271           core and other voltages.
 272
 273           This driver can also be built as a module.  If so, the module
 274           will be called atxp1.
 275
 276 config SENSORS_DS620
 277         tristate "Dallas Semiconductor DS620"
 278         depends on I2C
 279         help
 280           If you say yes here you get support for Dallas Semiconductor
 281           DS620 sensor chip.
 282
 283           This driver can also be built as a module.  If so, the module
 284           will be called ds620.
 285
 286 config SENSORS_DS1621
 287         tristate "Dallas Semiconductor DS1621 and DS1625"
 288         depends on I2C
 289         help
 290           If you say yes here you get support for Dallas Semiconductor
 291           DS1621 and DS1625 sensor chips.
 292
 293           This driver can also be built as a module.  If so, the module
 294           will be called ds1621.
 295
 296 config SENSORS_I5K_AMB
 297         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 298         depends on PCI && EXPERIMENTAL
 299         help
 300           If you say yes here you get support for FB-DIMM AMB temperature
 301           monitoring chips on systems with the Intel 5000 series chipset.
 302
 303           This driver can also be built as a module. If so, the module
 304           will be called i5k_amb.
 305
 306 config SENSORS_F71805F
 307         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 308         help
 309           If you say yes here you get support for hardware monitoring
 310           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 311           Super-I/O chips.
 312
 313           This driver can also be built as a module.  If so, the module
 314           will be called f71805f.
 315
 316 config SENSORS_F71882FG
 317         tristate "Fintek F71882FG and compatibles"
 318         help
 319           If you say yes here you get support for hardware monitoring
 320           features of many Fintek Super-I/O (LPC) chips. The currently
 321           supported chips are:
 322             F71808E
 323             F71858FG
 324             F71862FG
 325             F71863FG
 326             F71869F/E
 327             F71882FG
 328             F71883FG
 329             F71889FG/ED/A
 330             F8000
 331             F81801U
 332             F81865F
 333
 334           This driver can also be built as a module.  If so, the module
 335           will be called f71882fg.
 336
 337 config SENSORS_F75375S
 338         tristate "Fintek F75375S/SP and F75373"
 339         depends on I2C
 340         help
 341           If you say yes here you get support for hardware monitoring
 342           features of the Fintek F75375S/SP and F75373
 343
 344           This driver can also be built as a module.  If so, the module
 345           will be called f75375s.
 346
 347 config SENSORS_FSCHMD
 348         tristate "Fujitsu Siemens Computers sensor chips"
 349         depends on X86 && I2C
 350         help
 351           If you say yes here you get support for the following Fujitsu
 352           Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 353           Heimdall, Heracles, Hades and Syleus including support for the
 354           integrated watchdog.
 355
 356           This is a merged driver for FSC sensor chips replacing the fscpos,
 357           fscscy and fscher drivers and adding support for several other FSC
 358           sensor chips.
 359
 360           This driver can also be built as a module.  If so, the module
 361           will be called fschmd.
 362
 363 config SENSORS_G760A
 364         tristate "GMT G760A"
 365         depends on I2C
 366         help
 367           If you say yes here you get support for Global Mixed-mode
 368           Technology Inc G760A fan speed PWM controller chips.
 369
 370           This driver can also be built as a module.  If so, the module
 371           will be called g760a.
 372
 373 config SENSORS_GL518SM
 374         tristate "Genesys Logic GL518SM"
 375         depends on I2C
 376         help
 377           If you say yes here you get support for Genesys Logic GL518SM
 378           sensor chips.
 379
 380           This driver can also be built as a module.  If so, the module
 381           will be called gl518sm.
 382
 383 config SENSORS_GL520SM
 384         tristate "Genesys Logic GL520SM"
 385         depends on I2C
 386         select HWMON_VID
 387         help
 388           If you say yes here you get support for Genesys Logic GL520SM
 389           sensor chips.
 390
 391           This driver can also be built as a module.  If so, the module
 392           will be called gl520sm.
 393
 394 config SENSORS_GPIO_FAN
 395         tristate "GPIO fan"
 396         depends on GENERIC_GPIO
 397         help
 398           If you say yes here you get support for fans connected to GPIO lines.
 399
 400           This driver can also be built as a module.  If so, the module
 401           will be called gpio-fan.
 402
 403 config SENSORS_CORETEMP
 404         tristate "Intel Core/Core2/Atom temperature sensor"
 405         depends on X86 && PCI && EXPERIMENTAL
 406         help
 407           If you say yes here you get support for the temperature
 408           sensor inside your CPU. Most of the family 6 CPUs
 409           are supported. Check Documentation/hwmon/coretemp for details.
 410
 411 config SENSORS_IBMAEM
 412         tristate "IBM Active Energy Manager temperature/power sensors and control"
 413         select IPMI_SI
 414         depends on IPMI_HANDLER
 415         help
 416           If you say yes here you get support for the temperature and
 417           power sensors and capping hardware in various IBM System X
 418           servers that support Active Energy Manager.  This includes
 419           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 420           and certain HC10/HS2x/LS2x/QS2x blades.
 421
 422           This driver can also be built as a module.  If so, the module
 423           will be called ibmaem.
 424
 425 config SENSORS_IBMPEX
 426         tristate "IBM PowerExecutive temperature/power sensors"
 427         select IPMI_SI
 428         depends on IPMI_HANDLER
 429         help
 430           If you say yes here you get support for the temperature and
 431           power sensors in various IBM System X servers that support
 432           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 433           x3655, and x3755; the x3800, x3850, and x3950 models that have
 434           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 435
 436           This driver can also be built as a module.  If so, the module
 437           will be called ibmpex.
 438
 439 config SENSORS_IT87
 440         tristate "ITE IT87xx and compatibles"
 441         select HWMON_VID
 442         help
 443           If you say yes here you get support for ITE IT8705F, IT8712F,
 444           IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
 445           chips, and the SiS960 clone.
 446
 447           This driver can also be built as a module.  If so, the module
 448           will be called it87.
 449
 450 config SENSORS_JZ4740
 451         tristate "Ingenic JZ4740 SoC ADC driver"
 452         depends on MACH_JZ4740 && MFD_JZ4740_ADC
 453         help
 454           If you say yes here you get support for reading adc values from the ADCIN
 455           pin on Ingenic JZ4740 SoC based boards.
 456
 457           This driver can also be build as a module. If so, the module will be
 458           called jz4740-hwmon.
 459
 460 config SENSORS_JC42
 461         tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 462         depends on I2C
 463         help
 464           If you say yes here, you get support for JEDEC JC42.4 compliant
 465           temperature sensors, which are used on many DDR3 memory modules for
 466           mobile devices and servers.  Support will include, but not be limited
 467           to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
 468           MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
 469
 470           This driver can also be built as a module.  If so, the module
 471           will be called jc42.
 472
 473 config SENSORS_LINEAGE
 474         tristate "Lineage Compact Power Line Power Entry Module"
 475         depends on I2C && EXPERIMENTAL
 476         help
 477           If you say yes here you get support for the Lineage Compact Power Line
 478           series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 479           CP2000DC, CP2725, and others.
 480
 481           This driver can also be built as a module.  If so, the module
 482           will be called lineage-pem.
 483
 484 config SENSORS_LM63
 485         tristate "National Semiconductor LM63 and LM64"
 486         depends on I2C
 487         help
 488           If you say yes here you get support for the National
 489           Semiconductor LM63 and LM64 remote diode digital temperature
 490           sensors with integrated fan control.  Such chips are found
 491           on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 492           others.
 493
 494           This driver can also be built as a module.  If so, the module
 495           will be called lm63.
 496
 497 config SENSORS_LM70
 498         tristate "National Semiconductor LM70 / Texas Instruments TMP121"
 499         depends on SPI_MASTER
 500         help
 501           If you say yes here you get support for the National Semiconductor
 502           LM70 and Texas Instruments TMP121/TMP123 digital temperature
 503           sensor chips.
 504
 505           This driver can also be built as a module.  If so, the module
 506           will be called lm70.
 507
 508 config SENSORS_LM73
 509         tristate "National Semiconductor LM73"
 510         depends on I2C
 511         help
 512           If you say yes here you get support for National Semiconductor LM73
 513           sensor chips.
 514           This driver can also be built as a module.  If so, the module
 515           will be called lm73.
 516
 517 config SENSORS_LM75
 518         tristate "National Semiconductor LM75 and compatibles"
 519         depends on I2C
 520         help
 521           If you say yes here you get support for one common type of
 522           temperature sensor chip, with models including:
 523
 524                 - Dallas Semiconductor DS75 and DS1775
 525                 - Maxim MAX6625 and MAX6626
 526                 - Microchip MCP980x
 527                 - National Semiconductor LM75, LM75A
 528                 - NXP's LM75A
 529                 - ST Microelectronics STDS75
 530                 - TelCom (now Microchip) TCN75
 531                 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 532                   TMP275
 533
 534           This driver supports driver model based binding through board
 535           specific I2C device tables.
 536
 537           It also supports the "legacy" style of driver binding.  To use
 538           that with some chips which don't replicate LM75 quirks exactly,
 539           you may need the "force" module parameter.
 540
 541           This driver can also be built as a module.  If so, the module
 542           will be called lm75.
 543
 544 config SENSORS_LM77
 545         tristate "National Semiconductor LM77"
 546         depends on I2C
 547         help
 548           If you say yes here you get support for National Semiconductor LM77
 549           sensor chips.
 550
 551           This driver can also be built as a module.  If so, the module
 552           will be called lm77.
 553
 554 config SENSORS_LM78
 555         tristate "National Semiconductor LM78 and compatibles"
 556         depends on I2C
 557         select HWMON_VID
 558         help
 559           If you say yes here you get support for National Semiconductor LM78,
 560           LM78-J and LM79.
 561
 562           This driver can also be built as a module.  If so, the module
 563           will be called lm78.
 564
 565 config SENSORS_LM80
 566         tristate "National Semiconductor LM80"
 567         depends on I2C
 568         help
 569           If you say yes here you get support for National Semiconductor
 570           LM80 sensor chips.
 571
 572           This driver can also be built as a module.  If so, the module
 573           will be called lm80.
 574
 575 config SENSORS_LM83
 576         tristate "National Semiconductor LM83 and compatibles"
 577         depends on I2C
 578         help
 579           If you say yes here you get support for National Semiconductor
 580           LM82 and LM83 sensor chips.
 581
 582           This driver can also be built as a module.  If so, the module
 583           will be called lm83.
 584
 585 config SENSORS_LM85
 586         tristate "National Semiconductor LM85 and compatibles"
 587         depends on I2C
 588         select HWMON_VID
 589         help
 590           If you say yes here you get support for National Semiconductor LM85
 591           sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 592           EMC6D101, EMC6D102, and EMC6D103.
 593
 594           This driver can also be built as a module.  If so, the module
 595           will be called lm85.
 596
 597 config SENSORS_LM87
 598         tristate "National Semiconductor LM87 and compatibles"
 599         depends on I2C
 600         select HWMON_VID
 601         help
 602           If you say yes here you get support for National Semiconductor LM87
 603           and Analog Devices ADM1024 sensor chips.
 604
 605           This driver can also be built as a module.  If so, the module
 606           will be called lm87.
 607
 608 config SENSORS_LM90
 609         tristate "National Semiconductor LM90 and compatibles"
 610         depends on I2C
 611         help
 612           If you say yes here you get support for National Semiconductor LM90,
 613           LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 614           Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 615           MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
 616           and Winbond/Nuvoton W83L771W/G/AWG/ASG sensor chips.
 617
 618           This driver can also be built as a module.  If so, the module
 619           will be called lm90.
 620
 621 config SENSORS_LM92
 622         tristate "National Semiconductor LM92 and compatibles"
 623         depends on I2C
 624         help
 625           If you say yes here you get support for National Semiconductor LM92
 626           and Maxim MAX6635 sensor chips.
 627
 628           This driver can also be built as a module.  If so, the module
 629           will be called lm92.
 630
 631 config SENSORS_LM93
 632         tristate "National Semiconductor LM93 and compatibles"
 633         depends on I2C
 634         select HWMON_VID
 635         help
 636           If you say yes here you get support for National Semiconductor LM93,
 637           LM94, and compatible sensor chips.
 638
 639           This driver can also be built as a module.  If so, the module
 640           will be called lm93.
 641
 642 config SENSORS_LTC4151
 643         tristate "Linear Technology LTC4151"
 644         depends on I2C
 645         default n
 646         help
 647           If you say yes here you get support for Linear Technology LTC4151
 648           High Voltage I2C Current and Voltage Monitor interface.
 649
 650           This driver can also be built as a module. If so, the module will
 651           be called ltc4151.
 652
 653 config SENSORS_LTC4215
 654         tristate "Linear Technology LTC4215"
 655         depends on I2C && EXPERIMENTAL
 656         default n
 657         help
 658           If you say yes here you get support for Linear Technology LTC4215
 659           Hot Swap Controller I2C interface.
 660
 661           This driver can also be built as a module. If so, the module will
 662           be called ltc4215.
 663
 664 config SENSORS_LTC4245
 665         tristate "Linear Technology LTC4245"
 666         depends on I2C && EXPERIMENTAL
 667         default n
 668         help
 669           If you say yes here you get support for Linear Technology LTC4245
 670           Multiple Supply Hot Swap Controller I2C interface.
 671
 672           This driver can also be built as a module. If so, the module will
 673           be called ltc4245.
 674
 675 config SENSORS_LTC4261
 676         tristate "Linear Technology LTC4261"
 677         depends on I2C && EXPERIMENTAL
 678         default n
 679         help
 680           If you say yes here you get support for Linear Technology LTC4261
 681           Negative Voltage Hot Swap Controller I2C interface.
 682
 683           This driver can also be built as a module. If so, the module will
 684           be called ltc4261.
 685
 686 config SENSORS_LM95241
 687         tristate "National Semiconductor LM95241 sensor chip"
 688         depends on I2C
 689         help
 690           If you say yes here you get support for LM95241 sensor chip.
 691
 692           This driver can also be built as a module.  If so, the module
 693           will be called lm95241.
 694
 695 config SENSORS_MAX1111
 696         tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
 697         depends on SPI_MASTER
 698         help
 699           Say y here to support Maxim's MAX1111 ADC chips.
 700
 701           This driver can also be built as a module.  If so, the module
 702           will be called max1111.
 703
 704 config SENSORS_MAX16065
 705         tristate "Maxim MAX16065 System Manager and compatibles"
 706         depends on I2C
 707         help
 708           If you say yes here you get support for hardware monitoring
 709           capabilities of the following Maxim System Manager chips.
 710             MAX16065
 711             MAX16066
 712             MAX16067
 713             MAX16068
 714             MAX16070
 715             MAX16071
 716
 717           This driver can also be built as a module.  If so, the module
 718           will be called max16065.
 719
 720 config SENSORS_MAX1619
 721         tristate "Maxim MAX1619 sensor chip"
 722         depends on I2C
 723         help
 724           If you say yes here you get support for MAX1619 sensor chip.
 725
 726           This driver can also be built as a module.  If so, the module
 727           will be called max1619.
 728
 729 config SENSORS_MAX6639
 730         tristate "Maxim MAX6639 sensor chip"
 731         depends on I2C && EXPERIMENTAL
 732         help
 733           If you say yes here you get support for the MAX6639
 734           sensor chips.
 735
 736           This driver can also be built as a module.  If so, the module
 737           will be called max6639.
 738
 739 config SENSORS_MAX6642
 740         tristate "Maxim MAX6642 sensor chip"
 741         depends on I2C && EXPERIMENTAL
 742         help
 743           If you say yes here you get support for MAX6642 sensor chip.
 744           MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
 745           with Overtemperature Alarm from Maxim.
 746
 747           This driver can also be built as a module.  If so, the module
 748           will be called max6642.
 749
 750 config SENSORS_MAX6650
 751         tristate "Maxim MAX6650 sensor chip"
 752         depends on I2C && EXPERIMENTAL
 753         help
 754           If you say yes here you get support for the MAX6650 / MAX6651
 755           sensor chips.
 756
 757           This driver can also be built as a module.  If so, the module
 758           will be called max6650.
 759
 760 config SENSORS_PC87360
 761         tristate "National Semiconductor PC87360 family"
 762         select HWMON_VID
 763         help
 764           If you say yes here you get access to the hardware monitoring
 765           functions of the National Semiconductor PC8736x Super-I/O chips.
 766           The PC87360, PC87363 and PC87364 only have fan monitoring and
 767           control.  The PC87365 and PC87366 additionally have voltage and
 768           temperature monitoring.
 769
 770           This driver can also be built as a module.  If so, the module
 771           will be called pc87360.
 772
 773 config SENSORS_PC87427
 774         tristate "National Semiconductor PC87427"
 775         help
 776           If you say yes here you get access to the hardware monitoring
 777           functions of the National Semiconductor PC87427 Super-I/O chip.
 778           The chip has two distinct logical devices, one for fan speed
 779           monitoring and control, and one for voltage and temperature
 780           monitoring. Fan speed monitoring and control are supported, as
 781           well as temperature monitoring. Voltages aren't supported yet.
 782
 783           This driver can also be built as a module.  If so, the module
 784           will be called pc87427.
 785
 786 config SENSORS_PCF8591
 787         tristate "Philips PCF8591 ADC/DAC"
 788         depends on I2C
 789         default n
 790         help
 791           If you say yes here you get support for Philips PCF8591 4-channel
 792           ADC, 1-channel DAC chips.
 793
 794           This driver can also be built as a module.  If so, the module
 795           will be called pcf8591.
 796
 797           These devices are hard to detect and rarely found on mainstream
 798           hardware.  If unsure, say N.
 799
 800 config PMBUS
 801         tristate "PMBus support"
 802         depends on I2C && EXPERIMENTAL
 803         default n
 804         help
 805           Say yes here if you want to enable PMBus support.
 806
 807           This driver can also be built as a module. If so, the module will
 808           be called pmbus_core.
 809
 810 if PMBUS
 811
 812 config SENSORS_PMBUS
 813         tristate "Generic PMBus devices"
 814         default n
 815         help
 816           If you say yes here you get hardware monitoring support for generic
 817           PMBus devices, including but not limited to BMR450, BMR451, BMR453,
 818           BMR454, and LTC2978.
 819
 820           This driver can also be built as a module. If so, the module will
 821           be called pmbus.
 822
 823 config SENSORS_ADM1275
 824         tristate "Analog Devices ADM1275"
 825         default n
 826         help
 827           If you say yes here you get hardware monitoring support for Analog
 828           Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.
 829
 830           This driver can also be built as a module. If so, the module will
 831           be called adm1275.
 832
 833 config SENSORS_MAX16064
 834         tristate "Maxim MAX16064"
 835         default n
 836         help
 837           If you say yes here you get hardware monitoring support for Maxim
 838           MAX16064.
 839
 840           This driver can also be built as a module. If so, the module will
 841           be called max16064.
 842
 843 config SENSORS_MAX34440
 844         tristate "Maxim MAX34440/MAX34441"
 845         default n
 846         help
 847           If you say yes here you get hardware monitoring support for Maxim
 848           MAX34440 and MAX34441.
 849
 850           This driver can also be built as a module. If so, the module will
 851           be called max34440.
 852
 853 config SENSORS_MAX8688
 854         tristate "Maxim MAX8688"
 855         default n
 856         help
 857           If you say yes here you get hardware monitoring support for Maxim
 858           MAX8688.
 859
 860           This driver can also be built as a module. If so, the module will
 861           be called max8688.
 862
 863 config SENSORS_UCD9000
 864         tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
 865         default n
 866         help
 867           If you say yes here you get hardware monitoring support for TI
 868           UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
 869           Controllers.
 870
 871           This driver can also be built as a module. If so, the module will
 872           be called ucd9000.
 873
 874 config SENSORS_UCD9200
 875         tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
 876         default n
 877         help
 878           If you say yes here you get hardware monitoring support for TI
 879           UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
 880           Digital PWM System Controllers.
 881
 882           This driver can also be built as a module. If so, the module will
 883           be called ucd9200.
 884
 885 endif # PMBUS
 886
 887 config SENSORS_SHT15
 888         tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 889         depends on GENERIC_GPIO
 890         help
 891           If you say yes here you get support for the Sensiron SHT10, SHT11,
 892           SHT15, SHT71, SHT75 humidity and temperature sensors.
 893
 894           This driver can also be built as a module.  If so, the module
 895           will be called sht15.
 896
 897 config SENSORS_SHT21
 898         tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
 899         depends on I2C
 900         help
 901           If you say yes here you get support for the Sensiron SHT21, SHT25
 902           humidity and temperature sensors.
 903
 904           This driver can also be built as a module.  If so, the module
 905           will be called sht21.
 906
 907 config SENSORS_S3C
 908         tristate "Samsung built-in ADC"
 909         depends on S3C_ADC
 910         help
 911           If you say yes here you get support for the on-board ADCs of
 912           the Samsung S3C24XX, S3C64XX and other series of SoC
 913
 914           This driver can also be built as a module. If so, the module
 915           will be called s3c-hwmon.
 916
 917 config SENSORS_S3C_RAW
 918         bool "Include raw channel attributes in sysfs"
 919         depends on SENSORS_S3C
 920         help
 921           Say Y here if you want to include raw copies of all the ADC
 922           channels in sysfs.
 923
 924 config SENSORS_SIS5595
 925         tristate "Silicon Integrated Systems Corp. SiS5595"
 926         depends on PCI
 927         help
 928           If you say yes here you get support for the integrated sensors in
 929           SiS5595 South Bridges.
 930
 931           This driver can also be built as a module.  If so, the module
 932           will be called sis5595.
 933
 934 config SENSORS_SMM665
 935         tristate "Summit Microelectronics SMM665"
 936         depends on I2C && EXPERIMENTAL
 937         default n
 938         help
 939           If you say yes here you get support for the hardware monitoring
 940           features of the Summit Microelectronics SMM665/SMM665B Six-Channel
 941           Active DC Output Controller / Monitor.
 942
 943           Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
 944           Support for those chips is untested.
 945
 946           This driver can also be built as a module. If so, the module will
 947           be called smm665.
 948
 949 config SENSORS_DME1737
 950         tristate "SMSC DME1737, SCH311x and compatibles"
 951         depends on I2C && EXPERIMENTAL
 952         select HWMON_VID
 953         help
 954           If you say yes here you get support for the hardware monitoring
 955           and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
 956           Asus A8000 Super-I/O chips.
 957
 958           This driver can also be built as a module.  If so, the module
 959           will be called dme1737.
 960
 961 config SENSORS_EMC1403
 962         tristate "SMSC EMC1403/23 thermal sensor"
 963         depends on I2C
 964         help
 965           If you say yes here you get support for the SMSC EMC1403/23
 966           temperature monitoring chip.
 967
 968           Threshold values can be configured using sysfs.
 969           Data from the different diodes are accessible via sysfs.
 970
 971 config SENSORS_EMC2103
 972         tristate "SMSC EMC2103"
 973         depends on I2C
 974         help
 975           If you say yes here you get support for the temperature
 976           and fan sensors of the SMSC EMC2103 chips.
 977
 978           This driver can also be built as a module.  If so, the module
 979           will be called emc2103.
 980
 981 config SENSORS_SMSC47M1
 982         tristate "SMSC LPC47M10x and compatibles"
 983         help
 984           If you say yes here you get support for the integrated fan
 985           monitoring and control capabilities of the SMSC LPC47B27x,
 986           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
 987           LPC47M192, LPC47M292 and LPC47M997 chips.
 988
 989           The temperature and voltage sensor features of the LPC47M15x,
 990           LPC47M192, LPC47M292 and LPC47M997 are supported by another
 991           driver, select also "SMSC LPC47M192 and compatibles" below for
 992           those.
 993
 994           This driver can also be built as a module.  If so, the module
 995           will be called smsc47m1.
 996
 997 config SENSORS_SMSC47M192
 998         tristate "SMSC LPC47M192 and compatibles"
 999         depends on I2C
1000         select HWMON_VID
1001         help
1002           If you say yes here you get support for the temperature and
1003           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1004           and LPC47M997 chips.
1005
1006           The fan monitoring and control capabilities of these chips
1007           are supported by another driver, select
1008           "SMSC LPC47M10x and compatibles" above. You need both drivers
1009           if you want fan control and voltage/temperature sensor support.
1010
1011           This driver can also be built as a module.  If so, the module
1012           will be called smsc47m192.
1013
1014 config SENSORS_SMSC47B397
1015         tristate "SMSC LPC47B397-NC"
1016         depends on EXPERIMENTAL
1017         help
1018           If you say yes here you get support for the SMSC LPC47B397-NC
1019           sensor chip.
1020
1021           This driver can also be built as a module.  If so, the module
1022           will be called smsc47b397.
1023
1024 config SENSORS_SCH5627
1025         tristate "SMSC SCH5627"
1026         help
1027           If you say yes here you get support for the hardware monitoring
1028           features of the SMSC SCH5627 Super-I/O chip.
1029
1030           This driver can also be built as a module.  If so, the module
1031           will be called sch5627.
1032
1033 config SENSORS_ADS1015
1034         tristate "Texas Instruments ADS1015"
1035         depends on I2C
1036         help
1037           If you say yes here you get support for Texas Instruments ADS1015
1038           12-bit 4-input ADC device.
1039
1040           This driver can also be built as a module.  If so, the module
1041           will be called ads1015.
1042
1043 config SENSORS_ADS7828
1044         tristate "Texas Instruments ADS7828"
1045         depends on I2C
1046         help
1047           If you say yes here you get support for Texas Instruments ADS7828
1048           12-bit 8-channel ADC device.
1049
1050           This driver can also be built as a module.  If so, the module
1051           will be called ads7828.
1052
1053 config SENSORS_ADS7871
1054         tristate "Texas Instruments ADS7871 A/D converter"
1055         depends on SPI
1056         help
1057           If you say yes here you get support for TI ADS7871 & ADS7870
1058
1059           This driver can also be built as a module.  If so, the module
1060           will be called ads7871.
1061
1062 config SENSORS_AMC6821
1063         tristate "Texas Instruments AMC6821"
1064         depends on I2C  && EXPERIMENTAL
1065         help
1066           If you say yes here you get support for the Texas Instruments
1067           AMC6821 hardware monitoring chips.
1068
1069           This driver can also be build as a module.  If so, the module
1070           will be called amc6821.
1071
1072 config SENSORS_THMC50
1073         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1074         depends on I2C
1075         help
1076           If you say yes here you get support for Texas Instruments THMC50
1077           sensor chips and clones: the Analog Devices ADM1022.
1078
1079           This driver can also be built as a module.  If so, the module
1080           will be called thmc50.
1081
1082 config SENSORS_TMP102
1083         tristate "Texas Instruments TMP102"
1084         depends on I2C && EXPERIMENTAL
1085         help
1086           If you say yes here you get support for Texas Instruments TMP102
1087           sensor chips.
1088
1089           This driver can also be built as a module.  If so, the module
1090           will be called tmp102.
1091
1092 config SENSORS_TMP401
1093         tristate "Texas Instruments TMP401 and compatibles"
1094         depends on I2C && EXPERIMENTAL
1095         help
1096           If you say yes here you get support for Texas Instruments TMP401 and
1097           TMP411 temperature sensor chips.
1098
1099           This driver can also be built as a module.  If so, the module
1100           will be called tmp401.
1101
1102 config SENSORS_TMP421
1103         tristate "Texas Instruments TMP421 and compatible"
1104         depends on I2C && EXPERIMENTAL
1105         help
1106           If you say yes here you get support for Texas Instruments TMP421,
1107           TMP422 and TMP423 temperature sensor chips.
1108
1109           This driver can also be built as a module.  If so, the module
1110           will be called tmp421.
1111
1112 config SENSORS_TWL4030_MADC
1113         tristate "Texas Instruments TWL4030 MADC Hwmon"
1114         depends on TWL4030_MADC
1115         help
1116         If you say yes here you get hwmon support for triton
1117         TWL4030-MADC.
1118
1119         This driver can also be built as a module. If so it will be called
1120         twl4030-madc-hwmon.
1121
1122 config SENSORS_VIA_CPUTEMP
1123         tristate "VIA CPU temperature sensor"
1124         depends on X86
1125         help
1126           If you say yes here you get support for the temperature
1127           sensor inside your CPU. Supported are all known variants of
1128           the VIA C7 and Nano.
1129
1130 config SENSORS_VIA686A
1131         tristate "VIA686A"
1132         depends on PCI
1133         help
1134           If you say yes here you get support for the integrated sensors in
1135           Via 686A/B South Bridges.
1136
1137           This driver can also be built as a module.  If so, the module
1138           will be called via686a.
1139
1140 config SENSORS_VT1211
1141         tristate "VIA VT1211"
1142         select HWMON_VID
1143         help
1144           If you say yes here then you get support for hardware monitoring
1145           features of the VIA VT1211 Super-I/O chip.
1146
1147           This driver can also be built as a module.  If so, the module
1148           will be called vt1211.
1149
1150 config SENSORS_VT8231
1151         tristate "VIA VT8231"
1152         depends on PCI
1153         select HWMON_VID
1154         help
1155           If you say yes here then you get support for the integrated sensors
1156           in the VIA VT8231 device.
1157
1158           This driver can also be built as a module.  If so, the module
1159           will be called vt8231.
1160
1161 config SENSORS_W83781D
1162         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1163         depends on I2C
1164         select HWMON_VID
1165         help
1166           If you say yes here you get support for the Winbond W8378x series
1167           of sensor chips: the W83781D, W83782D and W83783S, and the similar
1168           Asus AS99127F.
1169
1170           This driver can also be built as a module.  If so, the module
1171           will be called w83781d.
1172
1173 config SENSORS_W83791D
1174         tristate "Winbond W83791D"
1175         depends on I2C
1176         select HWMON_VID
1177         help
1178           If you say yes here you get support for the Winbond W83791D chip.
1179
1180           This driver can also be built as a module.  If so, the module
1181           will be called w83791d.
1182
1183 config SENSORS_W83792D
1184         tristate "Winbond W83792D"
1185         depends on I2C
1186         help
1187           If you say yes here you get support for the Winbond W83792D chip.
1188
1189           This driver can also be built as a module.  If so, the module
1190           will be called w83792d.
1191
1192 config SENSORS_W83793
1193         tristate "Winbond W83793"
1194         depends on I2C && EXPERIMENTAL
1195         select HWMON_VID
1196         help
1197           If you say yes here you get support for the Winbond W83793
1198           hardware monitoring chip, including support for the integrated
1199           watchdog.
1200
1201           This driver can also be built as a module.  If so, the module
1202           will be called w83793.
1203
1204 config SENSORS_W83795
1205         tristate "Winbond/Nuvoton W83795G/ADG"
1206         depends on I2C && EXPERIMENTAL
1207         help
1208           If you say yes here you get support for the Winbond W83795G and
1209           W83795ADG hardware monitoring chip.
1210
1211           This driver can also be built as a module.  If so, the module
1212           will be called w83795.
1213
1214 config SENSORS_W83795_FANCTRL
1215         boolean "Include fan control support (DANGEROUS)"
1216         depends on SENSORS_W83795 && EXPERIMENTAL
1217         default n
1218         help
1219           If you say yes here, support for the both manual and automatic
1220           fan control features will be included in the driver.
1221
1222           This part of the code wasn't carefully reviewed and tested yet,
1223           so enabling this option is strongly discouraged on production
1224           servers. Only developers and testers should enable it for the
1225           time being.
1226
1227           Please also note that this option will create sysfs attribute
1228           files which may change in the future, so you shouldn't rely
1229           on them being stable.
1230
1231 config SENSORS_W83L785TS
1232         tristate "Winbond W83L785TS-S"
1233         depends on I2C && EXPERIMENTAL
1234         help
1235           If you say yes here you get support for the Winbond W83L785TS-S
1236           sensor chip, which is used on the Asus A7N8X, among other
1237           motherboards.
1238
1239           This driver can also be built as a module.  If so, the module
1240           will be called w83l785ts.
1241
1242 config SENSORS_W83L786NG
1243         tristate "Winbond W83L786NG, W83L786NR"
1244         depends on I2C && EXPERIMENTAL
1245         help
1246           If you say yes here you get support for the Winbond W83L786NG
1247           and W83L786NR sensor chips.
1248
1249           This driver can also be built as a module.  If so, the module
1250           will be called w83l786ng.
1251
1252 config SENSORS_W83627HF
1253         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1254         select HWMON_VID
1255         help
1256           If you say yes here you get support for the Winbond W836X7 series
1257           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1258           W83697HF.
1259
1260           This driver can also be built as a module.  If so, the module
1261           will be called w83627hf.
1262
1263 config SENSORS_W83627EHF
1264         tristate "Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F"
1265         select HWMON_VID
1266         help
1267           If you say yes here you get support for the hardware
1268           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1269
1270           This driver also supports the W83627EHG, which is the lead-free
1271           version of the W83627EHF, and the W83627DHG, which is a similar
1272           chip suited for specific Intel processors that use PECI such as
1273           the Core 2 Duo.
1274
1275           This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1276           (also known as W83667HG-I), and NCT6776F.
1277
1278           This driver can also be built as a module.  If so, the module
1279           will be called w83627ehf.
1280
1281 config SENSORS_WM831X
1282         tristate "WM831x PMICs"
1283         depends on MFD_WM831X
1284         help
1285           If you say yes here you get support for the hardware
1286           monitoring functionality of the Wolfson Microelectronics
1287           WM831x series of PMICs.
1288
1289           This driver can also be built as a module.  If so, the module
1290           will be called wm831x-hwmon.
1291
1292 config SENSORS_WM8350
1293         tristate "Wolfson Microelectronics WM835x"
1294         depends on MFD_WM8350
1295         help
1296           If you say yes here you get support for the hardware
1297           monitoring features of the WM835x series of PMICs.
1298
1299           This driver can also be built as a module.  If so, the module
1300           will be called wm8350-hwmon.
1301
1302 config SENSORS_ULTRA45
1303         tristate "Sun Ultra45 PIC16F747"
1304         depends on SPARC64
1305         help
1306           This driver provides support for the Ultra45 workstation environmental
1307           sensors.
1308
1309 config SENSORS_APPLESMC
1310         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1311         depends on INPUT && X86
1312         select NEW_LEDS
1313         select LEDS_CLASS
1314         select INPUT_POLLDEV
1315         default n
1316         help
1317           This driver provides support for the Apple System Management
1318           Controller, which provides an accelerometer (Apple Sudden Motion
1319           Sensor), light sensors, temperature sensors, keyboard backlight
1320           control and fan control.
1321
1322           Only Intel-based Apple's computers are supported (MacBook Pro,
1323           MacBook, MacMini).
1324
1325           Data from the different sensors, keyboard backlight control and fan
1326           control are accessible via sysfs.
1327
1328           This driver also provides an absolute input class device, allowing
1329           the laptop to act as a pinball machine-esque joystick.
1330
1331           Say Y here if you have an applicable laptop and want to experience
1332           the awesome power of applesmc.
1333
1334 config SENSORS_MC13783_ADC
1335         tristate "Freescale MC13783 ADC"
1336         depends on MFD_MC13783
1337         help
1338           Support for the A/D converter on MC13783 PMIC.
1339
1340 if ACPI
1341
1342 comment "ACPI drivers"
1343
1344 config SENSORS_ATK0110
1345         tristate "ASUS ATK0110"
1346         depends on X86 && EXPERIMENTAL
1347         help
1348           If you say yes here you get support for the ACPI hardware
1349           monitoring interface found in many ASUS motherboards. This
1350           driver will provide readings of fans, voltages and temperatures
1351           through the system firmware.
1352
1353           This driver can also be built as a module. If so, the module
1354           will be called asus_atk0110.
1355
1356 endif # ACPI
1357
1358 endif # HWMON