drivers/hwmon/Kconfig

   1 #
   2 # Hardware monitoring chip drivers configuration
   3 #
   4
   5 menuconfig HWMON
   6         tristate "Hardware Monitoring support"
   7         depends on HAS_IOMEM
   8         default y
   9         help
  10           Hardware monitoring devices let you monitor the hardware health
  11           of a system. Most modern motherboards include such a device. It
  12           can include temperature sensors, voltage sensors, fan speed
  13           sensors and various additional features such as the ability to
  14           control the speed of the fans.  If you want this support you
  15           should say Y here and also to the specific driver(s) for your
  16           sensors chip(s) below.
  17
  18           To find out which specific driver(s) you need, use the
  19           sensors-detect script from the lm_sensors package.  Read
  20           <file:Documentation/hwmon/userspace-tools> for details.
  21
  22           This support can also be built as a module.  If so, the module
  23           will be called hwmon.
  24
  25 if HWMON
  26
  27 config HWMON_VID
  28         tristate
  29         default n
  30
  31 config HWMON_DEBUG_CHIP
  32         bool "Hardware Monitoring Chip debugging messages"
  33         default n
  34         help
  35           Say Y here if you want the I2C chip drivers to produce a bunch of
  36           debug messages to the system log.  Select this if you are having
  37           a problem with I2C support and want to see more of what is going
  38           on.
  39
  40 comment "Native drivers"
  41
  42 config SENSORS_ABITUGURU
  43         tristate "Abit uGuru (rev 1 & 2)"
  44         depends on X86 && DMI
  45         help
  46           If you say yes here you get support for the sensor part of the first
  47           and second revision of the Abit uGuru chip. The voltage and frequency
  48           control parts of the Abit uGuru are not supported. The Abit uGuru
  49           chip can be found on Abit uGuru featuring motherboards (most modern
  50           Abit motherboards from before end 2005). For more info and a list
  51           of which motherboards have which revision see
  52           Documentation/hwmon/abituguru
  53
  54           This driver can also be built as a module.  If so, the module
  55           will be called abituguru.
  56
  57 config SENSORS_ABITUGURU3
  58         tristate "Abit uGuru (rev 3)"
  59         depends on X86 && DMI
  60         help
  61           If you say yes here you get support for the sensor part of the
  62           third revision of the Abit uGuru chip. Only reading the sensors
  63           and their settings is supported. The third revision of the Abit
  64           uGuru chip can be found on recent Abit motherboards (since end
  65           2005). For more info and a list of which motherboards have which
  66           revision see Documentation/hwmon/abituguru3
  67
  68           This driver can also be built as a module.  If so, the module
  69           will be called abituguru3.
  70
  71 config SENSORS_AD7314
  72         tristate "Analog Devices AD7314 and compatibles"
  73         depends on SPI
  74         help
  75           If you say yes here you get support for the Analog Devices
  76           AD7314, ADT7301 and ADT7302 temperature sensors.
  77
  78           This driver can also be built as a module. If so, the module
  79           will be called ad7314.
  80
  81 config SENSORS_AD7414
  82         tristate "Analog Devices AD7414"
  83         depends on I2C
  84         help
  85           If you say yes here you get support for the Analog Devices
  86           AD7414 temperature monitoring chip.
  87
  88           This driver can also be built as a module. If so, the module
  89           will be called ad7414.
  90
  91 config SENSORS_AD7418
  92         tristate "Analog Devices AD7416, AD7417 and AD7418"
  93         depends on I2C
  94         help
  95           If you say yes here you get support for the Analog Devices
  96           AD7416, AD7417 and AD7418 temperature monitoring chips.
  97
  98           This driver can also be built as a module. If so, the module
  99           will be called ad7418.
 100
 101 config SENSORS_ADCXX
 102         tristate "National Semiconductor ADCxxxSxxx"
 103         depends on SPI_MASTER
 104         help
 105           If you say yes here you get support for the National Semiconductor
 106           ADC<bb><c>S<sss> chip family, where
 107           * bb  is the resolution in number of bits (8, 10, 12)
 108           * c   is the number of channels (1, 2, 4, 8)
 109           * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 110             kSPS and 101 for 1 MSPS)
 111
 112           Examples : ADC081S101, ADC124S501, ...
 113
 114           This driver can also be built as a module.  If so, the module
 115           will be called adcxx.
 116
 117 config SENSORS_ADM1021
 118         tristate "Analog Devices ADM1021 and compatibles"
 119         depends on I2C
 120         help
 121           If you say yes here you get support for Analog Devices ADM1021
 122           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 123           Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 124
 125           This driver can also be built as a module.  If so, the module
 126           will be called adm1021.
 127
 128 config SENSORS_ADM1025
 129         tristate "Analog Devices ADM1025 and compatibles"
 130         depends on I2C
 131         select HWMON_VID
 132         help
 133           If you say yes here you get support for Analog Devices ADM1025
 134           and Philips NE1619 sensor chips.
 135
 136           This driver can also be built as a module.  If so, the module
 137           will be called adm1025.
 138
 139 config SENSORS_ADM1026
 140         tristate "Analog Devices ADM1026 and compatibles"
 141         depends on I2C
 142         select HWMON_VID
 143         help
 144           If you say yes here you get support for Analog Devices ADM1026
 145           sensor chip.
 146
 147           This driver can also be built as a module.  If so, the module
 148           will be called adm1026.
 149
 150 config SENSORS_ADM1029
 151         tristate "Analog Devices ADM1029"
 152         depends on I2C
 153         help
 154           If you say yes here you get support for Analog Devices ADM1029
 155           sensor chip.
 156           Very rare chip, please let us know you use it.
 157
 158           This driver can also be built as a module.  If so, the module
 159           will be called adm1029.
 160
 161 config SENSORS_ADM1031
 162         tristate "Analog Devices ADM1031 and compatibles"
 163         depends on I2C
 164         help
 165           If you say yes here you get support for Analog Devices ADM1031
 166           and ADM1030 sensor chips.
 167
 168           This driver can also be built as a module.  If so, the module
 169           will be called adm1031.
 170
 171 config SENSORS_ADM9240
 172         tristate "Analog Devices ADM9240 and compatibles"
 173         depends on I2C
 174         select HWMON_VID
 175         help
 176           If you say yes here you get support for Analog Devices ADM9240,
 177           Dallas DS1780, National Semiconductor LM81 sensor chips.
 178
 179           This driver can also be built as a module.  If so, the module
 180           will be called adm9240.
 181
 182 config SENSORS_ADT7410
 183         tristate "Analog Devices ADT7410/ADT7420"
 184         depends on I2C
 185         help
 186           If you say yes here you get support for the Analog Devices
 187           ADT7410 and ADT7420 temperature monitoring chips.
 188
 189           This driver can also be built as a module. If so, the module
 190           will be called adt7410.
 191
 192 config SENSORS_ADT7411
 193         tristate "Analog Devices ADT7411"
 194         depends on I2C
 195         help
 196           If you say yes here you get support for the Analog Devices
 197           ADT7411 voltage and temperature monitoring chip.
 198
 199           This driver can also be built as a module. If so, the module
 200           will be called adt7411.
 201
 202 config SENSORS_ADT7462
 203         tristate "Analog Devices ADT7462"
 204         depends on I2C
 205         help
 206           If you say yes here you get support for the Analog Devices
 207           ADT7462 temperature monitoring chips.
 208
 209           This driver can also be built as a module. If so, the module
 210           will be called adt7462.
 211
 212 config SENSORS_ADT7470
 213         tristate "Analog Devices ADT7470"
 214         depends on I2C
 215         help
 216           If you say yes here you get support for the Analog Devices
 217           ADT7470 temperature monitoring chips.
 218
 219           This driver can also be built as a module. If so, the module
 220           will be called adt7470.
 221
 222 config SENSORS_ADT7475
 223         tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 224         depends on I2C
 225         select HWMON_VID
 226         help
 227           If you say yes here you get support for the Analog Devices
 228           ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 229           chips.
 230
 231           This driver can also be build as a module.  If so, the module
 232           will be called adt7475.
 233
 234 config SENSORS_ASC7621
 235         tristate "Andigilog aSC7621"
 236         depends on I2C
 237         help
 238           If you say yes here you get support for the aSC7621
 239           family of SMBus sensors chip found on most Intel X38, X48, X58,
 240           945, 965 and 975 desktop boards.  Currently supported chips:
 241           aSC7621
 242           aSC7621a
 243
 244           This driver can also be built as a module.  If so, the module
 245           will be called asc7621.
 246
 247 config SENSORS_K8TEMP
 248         tristate "AMD Athlon64/FX or Opteron temperature sensor"
 249         depends on X86 && PCI
 250         help
 251           If you say yes here you get support for the temperature
 252           sensor(s) inside your CPU. Supported is whole AMD K8
 253           microarchitecture. Please note that you will need at least
 254           lm-sensors 2.10.1 for proper userspace support.
 255
 256           This driver can also be built as a module.  If so, the module
 257           will be called k8temp.
 258
 259 config SENSORS_K10TEMP
 260         tristate "AMD Family 10h+ temperature sensor"
 261         depends on X86 && PCI
 262         help
 263           If you say yes here you get support for the temperature
 264           sensor(s) inside your CPU. Supported are later revisions of
 265           the AMD Family 10h and all revisions of the AMD Family 11h,
 266           12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity)
 267           microarchitectures.
 268
 269           This driver can also be built as a module.  If so, the module
 270           will be called k10temp.
 271
 272 config SENSORS_FAM15H_POWER
 273         tristate "AMD Family 15h processor power"
 274         depends on X86 && PCI
 275         help
 276           If you say yes here you get support for processor power
 277           information of your AMD family 15h CPU.
 278
 279           This driver can also be built as a module.  If so, the module
 280           will be called fam15h_power.
 281
 282 config SENSORS_ASB100
 283         tristate "Asus ASB100 Bach"
 284         depends on X86 && I2C
 285         select HWMON_VID
 286         help
 287           If you say yes here you get support for the ASB100 Bach sensor
 288           chip found on some Asus mainboards.
 289
 290           This driver can also be built as a module.  If so, the module
 291           will be called asb100.
 292
 293 config SENSORS_ATXP1
 294         tristate "Attansic ATXP1 VID controller"
 295         depends on I2C
 296         select HWMON_VID
 297         help
 298           If you say yes here you get support for the Attansic ATXP1 VID
 299           controller.
 300
 301           If your board have such a chip, you are able to control your CPU
 302           core and other voltages.
 303
 304           This driver can also be built as a module.  If so, the module
 305           will be called atxp1.
 306
 307 config SENSORS_DS620
 308         tristate "Dallas Semiconductor DS620"
 309         depends on I2C
 310         help
 311           If you say yes here you get support for Dallas Semiconductor
 312           DS620 sensor chip.
 313
 314           This driver can also be built as a module.  If so, the module
 315           will be called ds620.
 316
 317 config SENSORS_DS1621
 318         tristate "Dallas Semiconductor DS1621 and DS1625"
 319         depends on I2C
 320         help
 321           If you say yes here you get support for Dallas Semiconductor
 322           DS1621 and DS1625 sensor chips.
 323
 324           This driver can also be built as a module.  If so, the module
 325           will be called ds1621.
 326
 327 config SENSORS_DA9052_ADC
 328         tristate "Dialog DA9052/DA9053 ADC"
 329         depends on PMIC_DA9052
 330         help
 331           Say y here to support the ADC found on Dialog Semiconductor
 332           DA9052-BC and DA9053-AA/Bx PMICs.
 333
 334           This driver can also be built as module. If so, the module
 335           will be called da9052-hwmon.
 336
 337 config SENSORS_DA9055
 338         tristate "Dialog Semiconductor DA9055 ADC"
 339         depends on MFD_DA9055
 340         help
 341           If you say yes here you get support for ADC on the Dialog
 342           Semiconductor DA9055 PMIC.
 343
 344           This driver can also be built as a module.  If so, the module
 345           will be called da9055-hwmon.
 346
 347 config SENSORS_I5K_AMB
 348         tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 349         depends on PCI
 350         help
 351           If you say yes here you get support for FB-DIMM AMB temperature
 352           monitoring chips on systems with the Intel 5000 series chipset.
 353
 354           This driver can also be built as a module. If so, the module
 355           will be called i5k_amb.
 356
 357 config SENSORS_F71805F
 358         tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 359         depends on !PPC
 360         help
 361           If you say yes here you get support for hardware monitoring
 362           features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 363           Super-I/O chips.
 364
 365           This driver can also be built as a module.  If so, the module
 366           will be called f71805f.
 367
 368 config SENSORS_F71882FG
 369         tristate "Fintek F71882FG and compatibles"
 370         depends on !PPC
 371         help
 372           If you say yes here you get support for hardware monitoring
 373           features of many Fintek Super-I/O (LPC) chips. The currently
 374           supported chips are:
 375             F71808E/A
 376             F71858FG
 377             F71862FG
 378             F71863FG
 379             F71869F/E/A
 380             F71882FG
 381             F71883FG
 382             F71889FG/ED/A
 383             F8000
 384             F81801U
 385             F81865F
 386
 387           This driver can also be built as a module.  If so, the module
 388           will be called f71882fg.
 389
 390 config SENSORS_F75375S
 391         tristate "Fintek F75375S/SP, F75373 and F75387"
 392         depends on I2C
 393         help
 394           If you say yes here you get support for hardware monitoring
 395           features of the Fintek F75375S/SP, F75373 and F75387
 396
 397           This driver can also be built as a module.  If so, the module
 398           will be called f75375s.
 399
 400 config SENSORS_FSCHMD
 401         tristate "Fujitsu Siemens Computers sensor chips"
 402         depends on X86 && I2C
 403         help
 404           If you say yes here you get support for the following Fujitsu
 405           Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 406           Heimdall, Heracles, Hades and Syleus including support for the
 407           integrated watchdog.
 408
 409           This is a merged driver for FSC sensor chips replacing the fscpos,
 410           fscscy and fscher drivers and adding support for several other FSC
 411           sensor chips.
 412
 413           This driver can also be built as a module.  If so, the module
 414           will be called fschmd.
 415
 416 config SENSORS_G760A
 417         tristate "GMT G760A"
 418         depends on I2C
 419         help
 420           If you say yes here you get support for Global Mixed-mode
 421           Technology Inc G760A fan speed PWM controller chips.
 422
 423           This driver can also be built as a module.  If so, the module
 424           will be called g760a.
 425
 426 config SENSORS_GL518SM
 427         tristate "Genesys Logic GL518SM"
 428         depends on I2C
 429         help
 430           If you say yes here you get support for Genesys Logic GL518SM
 431           sensor chips.
 432
 433           This driver can also be built as a module.  If so, the module
 434           will be called gl518sm.
 435
 436 config SENSORS_GL520SM
 437         tristate "Genesys Logic GL520SM"
 438         depends on I2C
 439         select HWMON_VID
 440         help
 441           If you say yes here you get support for Genesys Logic GL520SM
 442           sensor chips.
 443
 444           This driver can also be built as a module.  If so, the module
 445           will be called gl520sm.
 446
 447 config SENSORS_GPIO_FAN
 448         tristate "GPIO fan"
 449         depends on GPIOLIB
 450         help
 451           If you say yes here you get support for fans connected to GPIO lines.
 452
 453           This driver can also be built as a module.  If so, the module
 454           will be called gpio-fan.
 455
 456 config SENSORS_HIH6130
 457         tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
 458         depends on I2C
 459         help
 460           If you say yes here you get support for Honeywell Humidicon
 461           HIH-6130 and HIH-6131 Humidicon humidity sensors.
 462
 463           This driver can also be built as a module.  If so, the module
 464           will be called hih6130.
 465
 466 config SENSORS_CORETEMP
 467         tristate "Intel Core/Core2/Atom temperature sensor"
 468         depends on X86
 469         help
 470           If you say yes here you get support for the temperature
 471           sensor inside your CPU. Most of the family 6 CPUs
 472           are supported. Check Documentation/hwmon/coretemp for details.
 473
 474 config SENSORS_IBMAEM
 475         tristate "IBM Active Energy Manager temperature/power sensors and control"
 476         select IPMI_SI
 477         depends on IPMI_HANDLER
 478         help
 479           If you say yes here you get support for the temperature and
 480           power sensors and capping hardware in various IBM System X
 481           servers that support Active Energy Manager.  This includes
 482           the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 483           and certain HC10/HS2x/LS2x/QS2x blades.
 484
 485           This driver can also be built as a module.  If so, the module
 486           will be called ibmaem.
 487
 488 config SENSORS_IBMPEX
 489         tristate "IBM PowerExecutive temperature/power sensors"
 490         select IPMI_SI
 491         depends on IPMI_HANDLER
 492         help
 493           If you say yes here you get support for the temperature and
 494           power sensors in various IBM System X servers that support
 495           PowerExecutive.  So far this includes the x3350, x3550, x3650,
 496           x3655, and x3755; the x3800, x3850, and x3950 models that have
 497           PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 498
 499           This driver can also be built as a module.  If so, the module
 500           will be called ibmpex.
 501
 502 config SENSORS_IT87
 503         tristate "ITE IT87xx and compatibles"
 504         depends on !PPC
 505         select HWMON_VID
 506         help
 507           If you say yes here you get support for ITE IT8705F, IT8712F,
 508           IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
 509           IT8771E, IT8772E, IT8782F, and IT8783E/F sensor chips, and the
 510           SiS950 clone.
 511
 512           This driver can also be built as a module.  If so, the module
 513           will be called it87.
 514
 515 config SENSORS_JZ4740
 516         tristate "Ingenic JZ4740 SoC ADC driver"
 517         depends on MACH_JZ4740 && MFD_JZ4740_ADC
 518         help
 519           If you say yes here you get support for reading adc values from the ADCIN
 520           pin on Ingenic JZ4740 SoC based boards.
 521
 522           This driver can also be build as a module. If so, the module will be
 523           called jz4740-hwmon.
 524
 525 config SENSORS_JC42
 526         tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 527         depends on I2C
 528         help
 529           If you say yes here, you get support for JEDEC JC42.4 compliant
 530           temperature sensors, which are used on many DDR3 memory modules for
 531           mobile devices and servers.  Support will include, but not be limited
 532           to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
 533           MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
 534           STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
 535
 536           This driver can also be built as a module.  If so, the module
 537           will be called jc42.
 538
 539 config SENSORS_LINEAGE
 540         tristate "Lineage Compact Power Line Power Entry Module"
 541         depends on I2C
 542         help
 543           If you say yes here you get support for the Lineage Compact Power Line
 544           series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 545           CP2000DC, CP2725, and others.
 546
 547           This driver can also be built as a module.  If so, the module
 548           will be called lineage-pem.
 549
 550 config SENSORS_LM63
 551         tristate "National Semiconductor LM63 and compatibles"
 552         depends on I2C
 553         help
 554           If you say yes here you get support for the National
 555           Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
 556           sensors with integrated fan control.  Such chips are found
 557           on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 558           others.
 559
 560           This driver can also be built as a module.  If so, the module
 561           will be called lm63.
 562
 563 config SENSORS_LM70
 564         tristate "National Semiconductor LM70 and compatibles"
 565         depends on SPI_MASTER
 566         help
 567           If you say yes here you get support for the National Semiconductor
 568           LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
 569           ture sensor chips.
 570
 571           This driver can also be built as a module.  If so, the module
 572           will be called lm70.
 573
 574 config SENSORS_LM73
 575         tristate "National Semiconductor LM73"
 576         depends on I2C
 577         help
 578           If you say yes here you get support for National Semiconductor LM73
 579           sensor chips.
 580           This driver can also be built as a module.  If so, the module
 581           will be called lm73.
 582
 583 config SENSORS_LM75
 584         tristate "National Semiconductor LM75 and compatibles"
 585         depends on I2C
 586         help
 587           If you say yes here you get support for one common type of
 588           temperature sensor chip, with models including:
 589
 590                 - Analog Devices ADT75
 591                 - Dallas Semiconductor DS75 and DS1775
 592                 - Maxim MAX6625 and MAX6626
 593                 - Microchip MCP980x
 594                 - National Semiconductor LM75, LM75A
 595                 - NXP's LM75A
 596                 - ST Microelectronics STDS75
 597                 - TelCom (now Microchip) TCN75
 598                 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 599                   TMP275
 600
 601           This driver supports driver model based binding through board
 602           specific I2C device tables.
 603
 604           It also supports the "legacy" style of driver binding.  To use
 605           that with some chips which don't replicate LM75 quirks exactly,
 606           you may need the "force" module parameter.
 607
 608           This driver can also be built as a module.  If so, the module
 609           will be called lm75.
 610
 611 config SENSORS_LM77
 612         tristate "National Semiconductor LM77"
 613         depends on I2C
 614         help
 615           If you say yes here you get support for National Semiconductor LM77
 616           sensor chips.
 617
 618           This driver can also be built as a module.  If so, the module
 619           will be called lm77.
 620
 621 config SENSORS_LM78
 622         tristate "National Semiconductor LM78 and compatibles"
 623         depends on I2C
 624         select HWMON_VID
 625         help
 626           If you say yes here you get support for National Semiconductor LM78,
 627           LM78-J and LM79.
 628
 629           This driver can also be built as a module.  If so, the module
 630           will be called lm78.
 631
 632 config SENSORS_LM80
 633         tristate "National Semiconductor LM80 and LM96080"
 634         depends on I2C
 635         help
 636           If you say yes here you get support for National Semiconductor
 637           LM80 and LM96080 sensor chips.
 638
 639           This driver can also be built as a module.  If so, the module
 640           will be called lm80.
 641
 642 config SENSORS_LM83
 643         tristate "National Semiconductor LM83 and compatibles"
 644         depends on I2C
 645         help
 646           If you say yes here you get support for National Semiconductor
 647           LM82 and LM83 sensor chips.
 648
 649           This driver can also be built as a module.  If so, the module
 650           will be called lm83.
 651
 652 config SENSORS_LM85
 653         tristate "National Semiconductor LM85 and compatibles"
 654         depends on I2C
 655         select HWMON_VID
 656         help
 657           If you say yes here you get support for National Semiconductor LM85
 658           sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 659           EMC6D101, EMC6D102, and EMC6D103.
 660
 661           This driver can also be built as a module.  If so, the module
 662           will be called lm85.
 663
 664 config SENSORS_LM87
 665         tristate "National Semiconductor LM87 and compatibles"
 666         depends on I2C
 667         select HWMON_VID
 668         help
 669           If you say yes here you get support for National Semiconductor LM87
 670           and Analog Devices ADM1024 sensor chips.
 671
 672           This driver can also be built as a module.  If so, the module
 673           will be called lm87.
 674
 675 config SENSORS_LM90
 676         tristate "National Semiconductor LM90 and compatibles"
 677         depends on I2C
 678         help
 679           If you say yes here you get support for National Semiconductor LM90,
 680           LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 681           Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 682           MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
 683           Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
 684           sensor chips.
 685
 686           This driver can also be built as a module.  If so, the module
 687           will be called lm90.
 688
 689 config SENSORS_LM92
 690         tristate "National Semiconductor LM92 and compatibles"
 691         depends on I2C
 692         help
 693           If you say yes here you get support for National Semiconductor LM92
 694           and Maxim MAX6635 sensor chips.
 695
 696           This driver can also be built as a module.  If so, the module
 697           will be called lm92.
 698
 699 config SENSORS_LM93
 700         tristate "National Semiconductor LM93 and compatibles"
 701         depends on I2C
 702         select HWMON_VID
 703         help
 704           If you say yes here you get support for National Semiconductor LM93,
 705           LM94, and compatible sensor chips.
 706
 707           This driver can also be built as a module.  If so, the module
 708           will be called lm93.
 709
 710 config SENSORS_LTC4151
 711         tristate "Linear Technology LTC4151"
 712         depends on I2C
 713         default n
 714         help
 715           If you say yes here you get support for Linear Technology LTC4151
 716           High Voltage I2C Current and Voltage Monitor interface.
 717
 718           This driver can also be built as a module. If so, the module will
 719           be called ltc4151.
 720
 721 config SENSORS_LTC4215
 722         tristate "Linear Technology LTC4215"
 723         depends on I2C
 724         default n
 725         help
 726           If you say yes here you get support for Linear Technology LTC4215
 727           Hot Swap Controller I2C interface.
 728
 729           This driver can also be built as a module. If so, the module will
 730           be called ltc4215.
 731
 732 config SENSORS_LTC4245
 733         tristate "Linear Technology LTC4245"
 734         depends on I2C
 735         default n
 736         help
 737           If you say yes here you get support for Linear Technology LTC4245
 738           Multiple Supply Hot Swap Controller I2C interface.
 739
 740           This driver can also be built as a module. If so, the module will
 741           be called ltc4245.
 742
 743 config SENSORS_LTC4261
 744         tristate "Linear Technology LTC4261"
 745         depends on I2C
 746         default n
 747         help
 748           If you say yes here you get support for Linear Technology LTC4261
 749           Negative Voltage Hot Swap Controller I2C interface.
 750
 751           This driver can also be built as a module. If so, the module will
 752           be called ltc4261.
 753
 754 config SENSORS_LM95241
 755         tristate "National Semiconductor LM95241 and compatibles"
 756         depends on I2C
 757         help
 758           If you say yes here you get support for LM95231 and LM95241 sensor
 759           chips.
 760
 761           This driver can also be built as a module.  If so, the module
 762           will be called lm95241.
 763
 764 config SENSORS_LM95245
 765         tristate "National Semiconductor LM95245 sensor chip"
 766         depends on I2C
 767         help
 768           If you say yes here you get support for LM95245 sensor chip.
 769
 770           This driver can also be built as a module.  If so, the module
 771           will be called lm95245.
 772
 773 config SENSORS_MAX1111
 774         tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
 775         depends on SPI_MASTER
 776         help
 777           Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
 778           ADC chips.
 779
 780           This driver can also be built as a module.  If so, the module
 781           will be called max1111.
 782
 783 config SENSORS_MAX16065
 784         tristate "Maxim MAX16065 System Manager and compatibles"
 785         depends on I2C
 786         help
 787           If you say yes here you get support for hardware monitoring
 788           capabilities of the following Maxim System Manager chips.
 789             MAX16065
 790             MAX16066
 791             MAX16067
 792             MAX16068
 793             MAX16070
 794             MAX16071
 795
 796           This driver can also be built as a module.  If so, the module
 797           will be called max16065.
 798
 799 config SENSORS_MAX1619
 800         tristate "Maxim MAX1619 sensor chip"
 801         depends on I2C
 802         help
 803           If you say yes here you get support for MAX1619 sensor chip.
 804
 805           This driver can also be built as a module.  If so, the module
 806           will be called max1619.
 807
 808 config SENSORS_MAX1668
 809         tristate "Maxim MAX1668 and compatibles"
 810         depends on I2C
 811         help
 812           If you say yes here you get support for MAX1668, MAX1989 and
 813           MAX1805 chips.
 814
 815           This driver can also be built as a module.  If so, the module
 816           will be called max1668.
 817
 818 config SENSORS_MAX197
 819         tristate "Maxim MAX197 and compatibles"
 820         help
 821           Support for the Maxim MAX197 A/D converter.
 822           Support will include, but not be limited to, MAX197, and MAX199.
 823
 824           This driver can also be built as a module. If so, the module
 825           will be called max197.
 826
 827 config SENSORS_MAX6639
 828         tristate "Maxim MAX6639 sensor chip"
 829         depends on I2C
 830         help
 831           If you say yes here you get support for the MAX6639
 832           sensor chips.
 833
 834           This driver can also be built as a module.  If so, the module
 835           will be called max6639.
 836
 837 config SENSORS_MAX6642
 838         tristate "Maxim MAX6642 sensor chip"
 839         depends on I2C
 840         help
 841           If you say yes here you get support for MAX6642 sensor chip.
 842           MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
 843           with Overtemperature Alarm from Maxim.
 844
 845           This driver can also be built as a module.  If so, the module
 846           will be called max6642.
 847
 848 config SENSORS_MAX6650
 849         tristate "Maxim MAX6650 sensor chip"
 850         depends on I2C
 851         help
 852           If you say yes here you get support for the MAX6650 / MAX6651
 853           sensor chips.
 854
 855           This driver can also be built as a module.  If so, the module
 856           will be called max6650.
 857
 858 config SENSORS_MAX6697
 859         tristate "Maxim MAX6697 and compatibles"
 860         depends on I2C
 861         help
 862           If you say yes here you get support for MAX6581, MAX6602, MAX6622,
 863           MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
 864           temperature sensor chips.
 865
 866           This driver can also be built as a module.  If so, the module
 867           will be called max6697.
 868
 869 config SENSORS_MCP3021
 870         tristate "Microchip MCP3021 and compatibles"
 871         depends on I2C
 872         help
 873           If you say yes here you get support for MCP3021 and MCP3221.
 874           The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
 875           with 12-bit resolution.
 876
 877           This driver can also be built as a module.  If so, the module
 878           will be called mcp3021.
 879
 880 config SENSORS_NTC_THERMISTOR
 881         tristate "NTC thermistor support"
 882         help
 883           This driver supports NTC thermistors sensor reading and its
 884           interpretation. The driver can also monitor the temperature and
 885           send notifications about the temperature.
 886
 887           Currently, this driver supports
 888           NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
 889
 890           This driver can also be built as a module.  If so, the module
 891           will be called ntc-thermistor.
 892
 893 config SENSORS_PC87360
 894         tristate "National Semiconductor PC87360 family"
 895         depends on !PPC
 896         select HWMON_VID
 897         help
 898           If you say yes here you get access to the hardware monitoring
 899           functions of the National Semiconductor PC8736x Super-I/O chips.
 900           The PC87360, PC87363 and PC87364 only have fan monitoring and
 901           control.  The PC87365 and PC87366 additionally have voltage and
 902           temperature monitoring.
 903
 904           This driver can also be built as a module.  If so, the module
 905           will be called pc87360.
 906
 907 config SENSORS_PC87427
 908         tristate "National Semiconductor PC87427"
 909         depends on !PPC
 910         help
 911           If you say yes here you get access to the hardware monitoring
 912           functions of the National Semiconductor PC87427 Super-I/O chip.
 913           The chip has two distinct logical devices, one for fan speed
 914           monitoring and control, and one for voltage and temperature
 915           monitoring. Fan speed monitoring and control are supported, as
 916           well as temperature monitoring. Voltages aren't supported yet.
 917
 918           This driver can also be built as a module.  If so, the module
 919           will be called pc87427.
 920
 921 config SENSORS_PCF8591
 922         tristate "Philips PCF8591 ADC/DAC"
 923         depends on I2C
 924         default n
 925         help
 926           If you say yes here you get support for Philips PCF8591 4-channel
 927           ADC, 1-channel DAC chips.
 928
 929           This driver can also be built as a module.  If so, the module
 930           will be called pcf8591.
 931
 932           These devices are hard to detect and rarely found on mainstream
 933           hardware.  If unsure, say N.
 934
 935 source drivers/hwmon/pmbus/Kconfig
 936
 937 config SENSORS_SHT15
 938         tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 939         depends on GPIOLIB
 940         help
 941           If you say yes here you get support for the Sensiron SHT10, SHT11,
 942           SHT15, SHT71, SHT75 humidity and temperature sensors.
 943
 944           This driver can also be built as a module.  If so, the module
 945           will be called sht15.
 946
 947 config SENSORS_SHT21
 948         tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
 949         depends on I2C
 950         help
 951           If you say yes here you get support for the Sensiron SHT21, SHT25
 952           humidity and temperature sensors.
 953
 954           This driver can also be built as a module.  If so, the module
 955           will be called sht21.
 956
 957 config SENSORS_S3C
 958         tristate "Samsung built-in ADC"
 959         depends on S3C_ADC
 960         help
 961           If you say yes here you get support for the on-board ADCs of
 962           the Samsung S3C24XX, S3C64XX and other series of SoC
 963
 964           This driver can also be built as a module. If so, the module
 965           will be called s3c-hwmon.
 966
 967 config SENSORS_S3C_RAW
 968         bool "Include raw channel attributes in sysfs"
 969         depends on SENSORS_S3C
 970         help
 971           Say Y here if you want to include raw copies of all the ADC
 972           channels in sysfs.
 973
 974 config SENSORS_SIS5595
 975         tristate "Silicon Integrated Systems Corp. SiS5595"
 976         depends on PCI
 977         help
 978           If you say yes here you get support for the integrated sensors in
 979           SiS5595 South Bridges.
 980
 981           This driver can also be built as a module.  If so, the module
 982           will be called sis5595.
 983
 984 config SENSORS_SMM665
 985         tristate "Summit Microelectronics SMM665"
 986         depends on I2C
 987         default n
 988         help
 989           If you say yes here you get support for the hardware monitoring
 990           features of the Summit Microelectronics SMM665/SMM665B Six-Channel
 991           Active DC Output Controller / Monitor.
 992
 993           Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
 994           Support for those chips is untested.
 995
 996           This driver can also be built as a module. If so, the module will
 997           be called smm665.
 998
 999 config SENSORS_DME1737
1000         tristate "SMSC DME1737, SCH311x and compatibles"
1001         depends on I2C && !PPC
1002         select HWMON_VID
1003         help
1004           If you say yes here you get support for the hardware monitoring
1005           and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
1006           Asus A8000 Super-I/O chips.
1007
1008           This driver can also be built as a module.  If so, the module
1009           will be called dme1737.
1010
1011 config SENSORS_EMC1403
1012         tristate "SMSC EMC1403/23 thermal sensor"
1013         depends on I2C
1014         help
1015           If you say yes here you get support for the SMSC EMC1403/23
1016           temperature monitoring chip.
1017
1018           Threshold values can be configured using sysfs.
1019           Data from the different diodes are accessible via sysfs.
1020
1021 config SENSORS_EMC2103
1022         tristate "SMSC EMC2103"
1023         depends on I2C
1024         help
1025           If you say yes here you get support for the temperature
1026           and fan sensors of the SMSC EMC2103 chips.
1027
1028           This driver can also be built as a module.  If so, the module
1029           will be called emc2103.
1030
1031 config SENSORS_EMC6W201
1032         tristate "SMSC EMC6W201"
1033         depends on I2C
1034         help
1035           If you say yes here you get support for the SMSC EMC6W201
1036           hardware monitoring chip.
1037
1038           This driver can also be built as a module.  If so, the module
1039           will be called emc6w201.
1040
1041 config SENSORS_SMSC47M1
1042         tristate "SMSC LPC47M10x and compatibles"
1043         depends on !PPC
1044         help
1045           If you say yes here you get support for the integrated fan
1046           monitoring and control capabilities of the SMSC LPC47B27x,
1047           LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1048           LPC47M192, LPC47M292 and LPC47M997 chips.
1049
1050           The temperature and voltage sensor features of the LPC47M15x,
1051           LPC47M192, LPC47M292 and LPC47M997 are supported by another
1052           driver, select also "SMSC LPC47M192 and compatibles" below for
1053           those.
1054
1055           This driver can also be built as a module.  If so, the module
1056           will be called smsc47m1.
1057
1058 config SENSORS_SMSC47M192
1059         tristate "SMSC LPC47M192 and compatibles"
1060         depends on I2C
1061         select HWMON_VID
1062         help
1063           If you say yes here you get support for the temperature and
1064           voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1065           and LPC47M997 chips.
1066
1067           The fan monitoring and control capabilities of these chips
1068           are supported by another driver, select
1069           "SMSC LPC47M10x and compatibles" above. You need both drivers
1070           if you want fan control and voltage/temperature sensor support.
1071
1072           This driver can also be built as a module.  If so, the module
1073           will be called smsc47m192.
1074
1075 config SENSORS_SMSC47B397
1076         tristate "SMSC LPC47B397-NC"
1077         depends on !PPC
1078         help
1079           If you say yes here you get support for the SMSC LPC47B397-NC
1080           sensor chip.
1081
1082           This driver can also be built as a module.  If so, the module
1083           will be called smsc47b397.
1084
1085 config SENSORS_SCH56XX_COMMON
1086         tristate
1087         default n
1088
1089 config SENSORS_SCH5627
1090         tristate "SMSC SCH5627"
1091         depends on !PPC && WATCHDOG
1092         select SENSORS_SCH56XX_COMMON
1093         select WATCHDOG_CORE
1094         help
1095           If you say yes here you get support for the hardware monitoring
1096           features of the SMSC SCH5627 Super-I/O chip including support for
1097           the integrated watchdog.
1098
1099           This driver can also be built as a module.  If so, the module
1100           will be called sch5627.
1101
1102 config SENSORS_SCH5636
1103         tristate "SMSC SCH5636"
1104         depends on !PPC && WATCHDOG
1105         select SENSORS_SCH56XX_COMMON
1106         select WATCHDOG_CORE
1107         help
1108           SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1109           hardware monitoring solutions, allowing motherboard manufacturers to
1110           create their own custom hwmon solution based upon the SCH5636.
1111
1112           Currently this driver only supports the Fujitsu Theseus SCH5636 based
1113           hwmon solution. Say yes here if you want support for the Fujitsu
1114           Theseus' hardware monitoring features including support for the
1115           integrated watchdog.
1116
1117           This driver can also be built as a module.  If so, the module
1118           will be called sch5636.
1119
1120 config SENSORS_ADS1015
1121         tristate "Texas Instruments ADS1015"
1122         depends on I2C
1123         help
1124           If you say yes here you get support for Texas Instruments ADS1015
1125           12-bit 4-input ADC device.
1126
1127           This driver can also be built as a module.  If so, the module
1128           will be called ads1015.
1129
1130 config SENSORS_ADS7828
1131         tristate "Texas Instruments ADS7828 and compatibles"
1132         depends on I2C
1133         help
1134           If you say yes here you get support for Texas Instruments ADS7828 and
1135           ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
1136           it is 8-bit on ADS7830.
1137
1138           This driver can also be built as a module.  If so, the module
1139           will be called ads7828.
1140
1141 config SENSORS_ADS7871
1142         tristate "Texas Instruments ADS7871 A/D converter"
1143         depends on SPI
1144         help
1145           If you say yes here you get support for TI ADS7871 & ADS7870
1146
1147           This driver can also be built as a module.  If so, the module
1148           will be called ads7871.
1149
1150 config SENSORS_AMC6821
1151         tristate "Texas Instruments AMC6821"
1152         depends on I2C
1153         help
1154           If you say yes here you get support for the Texas Instruments
1155           AMC6821 hardware monitoring chips.
1156
1157           This driver can also be build as a module.  If so, the module
1158           will be called amc6821.
1159
1160 config SENSORS_INA209
1161         tristate "TI / Burr Brown INA209"
1162         depends on I2C
1163         help
1164           If you say yes here you get support for the TI / Burr Brown INA209
1165           voltage / current / power monitor I2C interface.
1166
1167           This driver can also be built as a module. If so, the module will
1168           be called ina209.
1169
1170 config SENSORS_INA2XX
1171         tristate "Texas Instruments INA219 and compatibles"
1172         depends on I2C
1173         help
1174           If you say yes here you get support for INA219, INA220, INA226, and
1175           INA230 power monitor chips.
1176
1177           The INA2xx driver is configured for the default configuration of
1178           the part as described in the datasheet.
1179           Default value for Rshunt is 10 mOhms.
1180           This driver can also be built as a module.  If so, the module
1181           will be called ina2xx.
1182
1183 config SENSORS_THMC50
1184         tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1185         depends on I2C
1186         help
1187           If you say yes here you get support for Texas Instruments THMC50
1188           sensor chips and clones: the Analog Devices ADM1022.
1189
1190           This driver can also be built as a module.  If so, the module
1191           will be called thmc50.
1192
1193 config SENSORS_TMP102
1194         tristate "Texas Instruments TMP102"
1195         depends on I2C
1196         help
1197           If you say yes here you get support for Texas Instruments TMP102
1198           sensor chips.
1199
1200           This driver can also be built as a module.  If so, the module
1201           will be called tmp102.
1202
1203 config SENSORS_TMP401
1204         tristate "Texas Instruments TMP401 and compatibles"
1205         depends on I2C
1206         help
1207           If you say yes here you get support for Texas Instruments TMP401 and
1208           TMP411 temperature sensor chips.
1209
1210           This driver can also be built as a module.  If so, the module
1211           will be called tmp401.
1212
1213 config SENSORS_TMP421
1214         tristate "Texas Instruments TMP421 and compatible"
1215         depends on I2C
1216         help
1217           If you say yes here you get support for Texas Instruments TMP421,
1218           TMP422 and TMP423 temperature sensor chips.
1219
1220           This driver can also be built as a module.  If so, the module
1221           will be called tmp421.
1222
1223 config SENSORS_TWL4030_MADC
1224         tristate "Texas Instruments TWL4030 MADC Hwmon"
1225         depends on TWL4030_MADC
1226         help
1227         If you say yes here you get hwmon support for triton
1228         TWL4030-MADC.
1229
1230         This driver can also be built as a module. If so it will be called
1231         twl4030-madc-hwmon.
1232
1233 config SENSORS_VEXPRESS
1234         tristate "Versatile Express"
1235         depends on VEXPRESS_CONFIG
1236         help
1237           This driver provides support for hardware sensors available on
1238           the ARM Ltd's Versatile Express platform. It can provide wide
1239           range of information like temperature, power, energy.
1240
1241 config SENSORS_VIA_CPUTEMP
1242         tristate "VIA CPU temperature sensor"
1243         depends on X86
1244         select HWMON_VID
1245         help
1246           If you say yes here you get support for the temperature
1247           sensor inside your CPU. Supported are all known variants of
1248           the VIA C7 and Nano.
1249
1250 config SENSORS_VIA686A
1251         tristate "VIA686A"
1252         depends on PCI
1253         help
1254           If you say yes here you get support for the integrated sensors in
1255           Via 686A/B South Bridges.
1256
1257           This driver can also be built as a module.  If so, the module
1258           will be called via686a.
1259
1260 config SENSORS_VT1211
1261         tristate "VIA VT1211"
1262         depends on !PPC
1263         select HWMON_VID
1264         help
1265           If you say yes here then you get support for hardware monitoring
1266           features of the VIA VT1211 Super-I/O chip.
1267
1268           This driver can also be built as a module.  If so, the module
1269           will be called vt1211.
1270
1271 config SENSORS_VT8231
1272         tristate "VIA VT8231"
1273         depends on PCI
1274         select HWMON_VID
1275         help
1276           If you say yes here then you get support for the integrated sensors
1277           in the VIA VT8231 device.
1278
1279           This driver can also be built as a module.  If so, the module
1280           will be called vt8231.
1281
1282 config SENSORS_W83781D
1283         tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1284         depends on I2C
1285         select HWMON_VID
1286         help
1287           If you say yes here you get support for the Winbond W8378x series
1288           of sensor chips: the W83781D, W83782D and W83783S, and the similar
1289           Asus AS99127F.
1290
1291           This driver can also be built as a module.  If so, the module
1292           will be called w83781d.
1293
1294 config SENSORS_W83791D
1295         tristate "Winbond W83791D"
1296         depends on I2C
1297         select HWMON_VID
1298         help
1299           If you say yes here you get support for the Winbond W83791D chip.
1300
1301           This driver can also be built as a module.  If so, the module
1302           will be called w83791d.
1303
1304 config SENSORS_W83792D
1305         tristate "Winbond W83792D"
1306         depends on I2C
1307         help
1308           If you say yes here you get support for the Winbond W83792D chip.
1309
1310           This driver can also be built as a module.  If so, the module
1311           will be called w83792d.
1312
1313 config SENSORS_W83793
1314         tristate "Winbond W83793"
1315         depends on I2C
1316         select HWMON_VID
1317         help
1318           If you say yes here you get support for the Winbond W83793
1319           hardware monitoring chip, including support for the integrated
1320           watchdog.
1321
1322           This driver can also be built as a module.  If so, the module
1323           will be called w83793.
1324
1325 config SENSORS_W83795
1326         tristate "Winbond/Nuvoton W83795G/ADG"
1327         depends on I2C
1328         help
1329           If you say yes here you get support for the Winbond W83795G and
1330           W83795ADG hardware monitoring chip, including manual fan speed
1331           control.
1332
1333           This driver can also be built as a module.  If so, the module
1334           will be called w83795.
1335
1336 config SENSORS_W83795_FANCTRL
1337         boolean "Include automatic fan control support (DANGEROUS)"
1338         depends on SENSORS_W83795
1339         default n
1340         help
1341           If you say yes here, support for automatic fan speed control
1342           will be included in the driver.
1343
1344           This part of the code wasn't carefully reviewed and tested yet,
1345           so enabling this option is strongly discouraged on production
1346           servers. Only developers and testers should enable it for the
1347           time being.
1348
1349           Please also note that this option will create sysfs attribute
1350           files which may change in the future, so you shouldn't rely
1351           on them being stable.
1352
1353 config SENSORS_W83L785TS
1354         tristate "Winbond W83L785TS-S"
1355         depends on I2C
1356         help
1357           If you say yes here you get support for the Winbond W83L785TS-S
1358           sensor chip, which is used on the Asus A7N8X, among other
1359           motherboards.
1360
1361           This driver can also be built as a module.  If so, the module
1362           will be called w83l785ts.
1363
1364 config SENSORS_W83L786NG
1365         tristate "Winbond W83L786NG, W83L786NR"
1366         depends on I2C
1367         help
1368           If you say yes here you get support for the Winbond W83L786NG
1369           and W83L786NR sensor chips.
1370
1371           This driver can also be built as a module.  If so, the module
1372           will be called w83l786ng.
1373
1374 config SENSORS_W83627HF
1375         tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1376         depends on !PPC
1377         select HWMON_VID
1378         help
1379           If you say yes here you get support for the Winbond W836X7 series
1380           of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1381           W83697HF.
1382
1383           This driver can also be built as a module.  If so, the module
1384           will be called w83627hf.
1385
1386 config SENSORS_W83627EHF
1387         tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
1388         depends on !PPC
1389         select HWMON_VID
1390         help
1391           If you say yes here you get support for the hardware
1392           monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1393
1394           This driver also supports the W83627EHG, which is the lead-free
1395           version of the W83627EHF, and the W83627DHG, which is a similar
1396           chip suited for specific Intel processors that use PECI such as
1397           the Core 2 Duo. And also the W83627UHG, which is a stripped down
1398           version of the W83627DHG (as far as hardware monitoring goes.)
1399
1400           This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1401           (also known as W83667HG-I), and NCT6776F.
1402
1403           This driver can also be built as a module.  If so, the module
1404           will be called w83627ehf.
1405
1406 config SENSORS_WM831X
1407         tristate "WM831x PMICs"
1408         depends on MFD_WM831X
1409         help
1410           If you say yes here you get support for the hardware
1411           monitoring functionality of the Wolfson Microelectronics
1412           WM831x series of PMICs.
1413
1414           This driver can also be built as a module.  If so, the module
1415           will be called wm831x-hwmon.
1416
1417 config SENSORS_WM8350
1418         tristate "Wolfson Microelectronics WM835x"
1419         depends on MFD_WM8350
1420         help
1421           If you say yes here you get support for the hardware
1422           monitoring features of the WM835x series of PMICs.
1423
1424           This driver can also be built as a module.  If so, the module
1425           will be called wm8350-hwmon.
1426
1427 config SENSORS_ULTRA45
1428         tristate "Sun Ultra45 PIC16F747"
1429         depends on SPARC64
1430         help
1431           This driver provides support for the Ultra45 workstation environmental
1432           sensors.
1433
1434 config SENSORS_APPLESMC
1435         tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1436         depends on INPUT && X86
1437         select NEW_LEDS
1438         select LEDS_CLASS
1439         select INPUT_POLLDEV
1440         default n
1441         help
1442           This driver provides support for the Apple System Management
1443           Controller, which provides an accelerometer (Apple Sudden Motion
1444           Sensor), light sensors, temperature sensors, keyboard backlight
1445           control and fan control.
1446
1447           Only Intel-based Apple's computers are supported (MacBook Pro,
1448           MacBook, MacMini).
1449
1450           Data from the different sensors, keyboard backlight control and fan
1451           control are accessible via sysfs.
1452
1453           This driver also provides an absolute input class device, allowing
1454           the laptop to act as a pinball machine-esque joystick.
1455
1456           Say Y here if you have an applicable laptop and want to experience
1457           the awesome power of applesmc.
1458
1459 config SENSORS_MC13783_ADC
1460         tristate "Freescale MC13783/MC13892 ADC"
1461         depends on MFD_MC13XXX
1462         help
1463           Support for the A/D converter on MC13783 and MC13892 PMIC.
1464
1465 if ACPI
1466
1467 comment "ACPI drivers"
1468
1469 config SENSORS_ACPI_POWER
1470         tristate "ACPI 4.0 power meter"
1471         help
1472           This driver exposes ACPI 4.0 power meters as hardware monitoring
1473           devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
1474           and a power meter.
1475
1476           To compile this driver as a module, choose M here:
1477           the module will be called acpi_power_meter.
1478
1479 config SENSORS_ATK0110
1480         tristate "ASUS ATK0110"
1481         depends on X86
1482         help
1483           If you say yes here you get support for the ACPI hardware
1484           monitoring interface found in many ASUS motherboards. This
1485           driver will provide readings of fans, voltages and temperatures
1486           through the system firmware.
1487
1488           This driver can also be built as a module. If so, the module
1489           will be called asus_atk0110.
1490
1491 endif # ACPI
1492
1493 endif # HWMON