2 adm1021.c - Part of lm_sensors, Linux kernel modules for hardware
4 Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
5 Philip Edelbrock <phil@netroedge.com>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 #include <linux/module.h>
23 #include <linux/init.h>
24 #include <linux/slab.h>
25 #include <linux/jiffies.h>
26 #include <linux/i2c.h>
27 #include <linux/hwmon.h>
28 #include <linux/err.h>
31 /* Addresses to scan */
32 static unsigned short normal_i2c
[] = { 0x18, 0x19, 0x1a,
37 /* Insmod parameters */
38 I2C_CLIENT_INSMOD_8(adm1021
, adm1023
, max1617
, max1617a
, thmc10
, lm84
, gl523sm
, mc1066
);
40 /* adm1021 constants specified below */
42 /* The adm1021 registers */
44 #define ADM1021_REG_TEMP 0x00
45 #define ADM1021_REG_REMOTE_TEMP 0x01
46 #define ADM1021_REG_STATUS 0x02
47 #define ADM1021_REG_MAN_ID 0x0FE /* 0x41 = AMD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi*/
48 #define ADM1021_REG_DEV_ID 0x0FF /* ADM1021 = 0x0X, ADM1023 = 0x3X */
49 #define ADM1021_REG_DIE_CODE 0x0FF /* MAX1617A */
50 /* These use different addresses for reading/writing */
51 #define ADM1021_REG_CONFIG_R 0x03
52 #define ADM1021_REG_CONFIG_W 0x09
53 #define ADM1021_REG_CONV_RATE_R 0x04
54 #define ADM1021_REG_CONV_RATE_W 0x0A
55 /* These are for the ADM1023's additional precision on the remote temp sensor */
56 #define ADM1021_REG_REM_TEMP_PREC 0x010
57 #define ADM1021_REG_REM_OFFSET 0x011
58 #define ADM1021_REG_REM_OFFSET_PREC 0x012
59 #define ADM1021_REG_REM_TOS_PREC 0x013
60 #define ADM1021_REG_REM_THYST_PREC 0x014
62 #define ADM1021_REG_TOS_R 0x05
63 #define ADM1021_REG_TOS_W 0x0B
64 #define ADM1021_REG_REMOTE_TOS_R 0x07
65 #define ADM1021_REG_REMOTE_TOS_W 0x0D
66 #define ADM1021_REG_THYST_R 0x06
67 #define ADM1021_REG_THYST_W 0x0C
68 #define ADM1021_REG_REMOTE_THYST_R 0x08
69 #define ADM1021_REG_REMOTE_THYST_W 0x0E
71 #define ADM1021_REG_ONESHOT 0x0F
74 /* Conversions. Rounding and limit checking is only done on the TO_REG
75 variants. Note that you should be a bit careful with which arguments
76 these macros are called: arguments may be evaluated more than once.
77 Fixing this is just not worth it. */
78 /* Conversions note: 1021 uses normal integer signed-byte format*/
79 #define TEMP_FROM_REG(val) (val > 127 ? (val-256)*1000 : val*1000)
80 #define TEMP_TO_REG(val) (SENSORS_LIMIT((val < 0 ? (val/1000)+256 : val/1000),0,255))
84 /* Note: Even though I left the low and high limits named os and hyst,
85 they don't quite work like a thermostat the way the LM75 does. I.e.,
86 a lower temp than THYST actually triggers an alarm instead of
87 clearing it. Weird, ey? --Phil */
89 /* Each client has this additional data */
91 struct i2c_client client
;
92 struct class_device
*class_dev
;
95 struct semaphore update_lock
;
96 char valid
; /* !=0 if following fields are valid */
97 unsigned long last_updated
; /* In jiffies */
99 u8 temp_max
; /* Register values */
104 u8 remote_temp_input
;
106 /* Special values for ADM1023 only */
108 u8 remote_temp_os_prec
;
109 u8 remote_temp_hyst_prec
;
110 u8 remote_temp_offset
;
111 u8 remote_temp_offset_prec
;
114 static int adm1021_attach_adapter(struct i2c_adapter
*adapter
);
115 static int adm1021_detect(struct i2c_adapter
*adapter
, int address
, int kind
);
116 static void adm1021_init_client(struct i2c_client
*client
);
117 static int adm1021_detach_client(struct i2c_client
*client
);
118 static int adm1021_read_value(struct i2c_client
*client
, u8 reg
);
119 static int adm1021_write_value(struct i2c_client
*client
, u8 reg
,
121 static struct adm1021_data
*adm1021_update_device(struct device
*dev
);
123 /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
124 static int read_only
;
127 /* This is the driver that will be inserted */
128 static struct i2c_driver adm1021_driver
= {
129 .owner
= THIS_MODULE
,
131 .id
= I2C_DRIVERID_ADM1021
,
132 .flags
= I2C_DF_NOTIFY
,
133 .attach_adapter
= adm1021_attach_adapter
,
134 .detach_client
= adm1021_detach_client
,
137 #define show(value) \
138 static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
140 struct adm1021_data *data = adm1021_update_device(dev); \
141 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \
146 show(remote_temp_max
);
147 show(remote_temp_hyst
);
148 show(remote_temp_input
);
150 #define show2(value) \
151 static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
153 struct adm1021_data *data = adm1021_update_device(dev); \
154 return sprintf(buf, "%d\n", data->value); \
158 #define set(value, reg) \
159 static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
161 struct i2c_client *client = to_i2c_client(dev); \
162 struct adm1021_data *data = i2c_get_clientdata(client); \
163 int temp = simple_strtoul(buf, NULL, 10); \
165 down(&data->update_lock); \
166 data->value = TEMP_TO_REG(temp); \
167 adm1021_write_value(client, reg, data->value); \
168 up(&data->update_lock); \
171 set(temp_max
, ADM1021_REG_TOS_W
);
172 set(temp_hyst
, ADM1021_REG_THYST_W
);
173 set(remote_temp_max
, ADM1021_REG_REMOTE_TOS_W
);
174 set(remote_temp_hyst
, ADM1021_REG_REMOTE_THYST_W
);
176 static DEVICE_ATTR(temp1_max
, S_IWUSR
| S_IRUGO
, show_temp_max
, set_temp_max
);
177 static DEVICE_ATTR(temp1_min
, S_IWUSR
| S_IRUGO
, show_temp_hyst
, set_temp_hyst
);
178 static DEVICE_ATTR(temp1_input
, S_IRUGO
, show_temp_input
, NULL
);
179 static DEVICE_ATTR(temp2_max
, S_IWUSR
| S_IRUGO
, show_remote_temp_max
, set_remote_temp_max
);
180 static DEVICE_ATTR(temp2_min
, S_IWUSR
| S_IRUGO
, show_remote_temp_hyst
, set_remote_temp_hyst
);
181 static DEVICE_ATTR(temp2_input
, S_IRUGO
, show_remote_temp_input
, NULL
);
182 static DEVICE_ATTR(alarms
, S_IRUGO
, show_alarms
, NULL
);
185 static int adm1021_attach_adapter(struct i2c_adapter
*adapter
)
187 if (!(adapter
->class & I2C_CLASS_HWMON
))
189 return i2c_probe(adapter
, &addr_data
, adm1021_detect
);
192 static int adm1021_detect(struct i2c_adapter
*adapter
, int address
, int kind
)
195 struct i2c_client
*new_client
;
196 struct adm1021_data
*data
;
198 const char *type_name
= "";
200 if (!i2c_check_functionality(adapter
, I2C_FUNC_SMBUS_BYTE_DATA
))
203 /* OK. For now, we presume we have a valid client. We now create the
204 client structure, even though we cannot fill it completely yet.
205 But it allows us to access adm1021_{read,write}_value. */
207 if (!(data
= kmalloc(sizeof(struct adm1021_data
), GFP_KERNEL
))) {
211 memset(data
, 0, sizeof(struct adm1021_data
));
213 new_client
= &data
->client
;
214 i2c_set_clientdata(new_client
, data
);
215 new_client
->addr
= address
;
216 new_client
->adapter
= adapter
;
217 new_client
->driver
= &adm1021_driver
;
218 new_client
->flags
= 0;
220 /* Now, we do the remaining detection. */
222 if ((adm1021_read_value(new_client
, ADM1021_REG_STATUS
) & 0x03) != 0x00
223 || (adm1021_read_value(new_client
, ADM1021_REG_CONFIG_R
) & 0x3F) != 0x00
224 || (adm1021_read_value(new_client
, ADM1021_REG_CONV_RATE_R
) & 0xF8) != 0x00) {
230 /* Determine the chip type. */
232 i
= adm1021_read_value(new_client
, ADM1021_REG_MAN_ID
);
234 if ((adm1021_read_value(new_client
, ADM1021_REG_DEV_ID
) & 0x0F0) == 0x030)
242 else if ((i
== 0x4d) &&
243 (adm1021_read_value(new_client
, ADM1021_REG_DEV_ID
) == 0x01))
247 /* LM84 Mfr ID in a different place, and it has more unused bits */
248 else if (adm1021_read_value(new_client
, ADM1021_REG_CONV_RATE_R
) == 0x00
249 && (kind
== 0 /* skip extra detection */
250 || ((adm1021_read_value(new_client
, ADM1021_REG_CONFIG_R
) & 0x7F) == 0x00
251 && (adm1021_read_value(new_client
, ADM1021_REG_STATUS
) & 0xAB) == 0x00)))
257 if (kind
== max1617
) {
258 type_name
= "max1617";
259 } else if (kind
== max1617a
) {
260 type_name
= "max1617a";
261 } else if (kind
== adm1021
) {
262 type_name
= "adm1021";
263 } else if (kind
== adm1023
) {
264 type_name
= "adm1023";
265 } else if (kind
== thmc10
) {
266 type_name
= "thmc10";
267 } else if (kind
== lm84
) {
269 } else if (kind
== gl523sm
) {
270 type_name
= "gl523sm";
271 } else if (kind
== mc1066
) {
272 type_name
= "mc1066";
275 /* Fill in the remaining client fields and put it into the global list */
276 strlcpy(new_client
->name
, type_name
, I2C_NAME_SIZE
);
279 init_MUTEX(&data
->update_lock
);
281 /* Tell the I2C layer a new client has arrived */
282 if ((err
= i2c_attach_client(new_client
)))
285 /* Initialize the ADM1021 chip */
287 adm1021_init_client(new_client
);
289 /* Register sysfs hooks */
290 data
->class_dev
= hwmon_device_register(&new_client
->dev
);
291 if (IS_ERR(data
->class_dev
)) {
292 err
= PTR_ERR(data
->class_dev
);
296 device_create_file(&new_client
->dev
, &dev_attr_temp1_max
);
297 device_create_file(&new_client
->dev
, &dev_attr_temp1_min
);
298 device_create_file(&new_client
->dev
, &dev_attr_temp1_input
);
299 device_create_file(&new_client
->dev
, &dev_attr_temp2_max
);
300 device_create_file(&new_client
->dev
, &dev_attr_temp2_min
);
301 device_create_file(&new_client
->dev
, &dev_attr_temp2_input
);
302 device_create_file(&new_client
->dev
, &dev_attr_alarms
);
307 i2c_detach_client(new_client
);
314 static void adm1021_init_client(struct i2c_client
*client
)
316 /* Enable ADC and disable suspend mode */
317 adm1021_write_value(client
, ADM1021_REG_CONFIG_W
,
318 adm1021_read_value(client
, ADM1021_REG_CONFIG_R
) & 0xBF);
319 /* Set Conversion rate to 1/sec (this can be tinkered with) */
320 adm1021_write_value(client
, ADM1021_REG_CONV_RATE_W
, 0x04);
323 static int adm1021_detach_client(struct i2c_client
*client
)
325 struct adm1021_data
*data
= i2c_get_clientdata(client
);
328 hwmon_device_unregister(data
->class_dev
);
330 if ((err
= i2c_detach_client(client
)))
337 /* All registers are byte-sized */
338 static int adm1021_read_value(struct i2c_client
*client
, u8 reg
)
340 return i2c_smbus_read_byte_data(client
, reg
);
343 static int adm1021_write_value(struct i2c_client
*client
, u8 reg
, u16 value
)
346 return i2c_smbus_write_byte_data(client
, reg
, value
);
350 static struct adm1021_data
*adm1021_update_device(struct device
*dev
)
352 struct i2c_client
*client
= to_i2c_client(dev
);
353 struct adm1021_data
*data
= i2c_get_clientdata(client
);
355 down(&data
->update_lock
);
357 if (time_after(jiffies
, data
->last_updated
+ HZ
+ HZ
/ 2)
359 dev_dbg(&client
->dev
, "Starting adm1021 update\n");
361 data
->temp_input
= adm1021_read_value(client
, ADM1021_REG_TEMP
);
362 data
->temp_max
= adm1021_read_value(client
, ADM1021_REG_TOS_R
);
363 data
->temp_hyst
= adm1021_read_value(client
, ADM1021_REG_THYST_R
);
364 data
->remote_temp_input
= adm1021_read_value(client
, ADM1021_REG_REMOTE_TEMP
);
365 data
->remote_temp_max
= adm1021_read_value(client
, ADM1021_REG_REMOTE_TOS_R
);
366 data
->remote_temp_hyst
= adm1021_read_value(client
, ADM1021_REG_REMOTE_THYST_R
);
367 data
->alarms
= adm1021_read_value(client
, ADM1021_REG_STATUS
) & 0x7c;
368 if (data
->type
== adm1023
) {
369 data
->remote_temp_prec
= adm1021_read_value(client
, ADM1021_REG_REM_TEMP_PREC
);
370 data
->remote_temp_os_prec
= adm1021_read_value(client
, ADM1021_REG_REM_TOS_PREC
);
371 data
->remote_temp_hyst_prec
= adm1021_read_value(client
, ADM1021_REG_REM_THYST_PREC
);
372 data
->remote_temp_offset
= adm1021_read_value(client
, ADM1021_REG_REM_OFFSET
);
373 data
->remote_temp_offset_prec
= adm1021_read_value(client
, ADM1021_REG_REM_OFFSET_PREC
);
375 data
->last_updated
= jiffies
;
379 up(&data
->update_lock
);
384 static int __init
sensors_adm1021_init(void)
386 return i2c_add_driver(&adm1021_driver
);
389 static void __exit
sensors_adm1021_exit(void)
391 i2c_del_driver(&adm1021_driver
);
394 MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl> and "
395 "Philip Edelbrock <phil@netroedge.com>");
396 MODULE_DESCRIPTION("adm1021 driver");
397 MODULE_LICENSE("GPL");
399 module_param(read_only
, bool, 0);
400 MODULE_PARM_DESC(read_only
, "Don't set any values, read only mode");
402 module_init(sensors_adm1021_init
)
403 module_exit(sensors_adm1021_exit
)