2 * Hardware monitoring driver for PMBus devices
4 * Copyright (c) 2010, 2011 Ericsson AB.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 #include <linux/kernel.h>
22 #include <linux/module.h>
23 #include <linux/init.h>
24 #include <linux/err.h>
25 #include <linux/slab.h>
26 #include <linux/mutex.h>
27 #include <linux/i2c.h>
31 * Find sensor groups and status registers on each page.
33 static void pmbus_find_sensor_groups(struct i2c_client
*client
,
34 struct pmbus_driver_info
*info
)
38 /* Sensors detected on page 0 only */
39 if (pmbus_check_word_register(client
, 0, PMBUS_READ_VIN
))
40 info
->func
[0] |= PMBUS_HAVE_VIN
;
41 if (pmbus_check_word_register(client
, 0, PMBUS_READ_VCAP
))
42 info
->func
[0] |= PMBUS_HAVE_VCAP
;
43 if (pmbus_check_word_register(client
, 0, PMBUS_READ_IIN
))
44 info
->func
[0] |= PMBUS_HAVE_IIN
;
45 if (pmbus_check_word_register(client
, 0, PMBUS_READ_PIN
))
46 info
->func
[0] |= PMBUS_HAVE_PIN
;
48 && pmbus_check_byte_register(client
, 0, PMBUS_STATUS_INPUT
))
49 info
->func
[0] |= PMBUS_HAVE_STATUS_INPUT
;
50 if (pmbus_check_byte_register(client
, 0, PMBUS_FAN_CONFIG_12
) &&
51 pmbus_check_word_register(client
, 0, PMBUS_READ_FAN_SPEED_1
)) {
52 info
->func
[0] |= PMBUS_HAVE_FAN12
;
53 if (pmbus_check_byte_register(client
, 0, PMBUS_STATUS_FAN_12
))
54 info
->func
[0] |= PMBUS_HAVE_STATUS_FAN12
;
56 if (pmbus_check_byte_register(client
, 0, PMBUS_FAN_CONFIG_34
) &&
57 pmbus_check_word_register(client
, 0, PMBUS_READ_FAN_SPEED_3
)) {
58 info
->func
[0] |= PMBUS_HAVE_FAN34
;
59 if (pmbus_check_byte_register(client
, 0, PMBUS_STATUS_FAN_34
))
60 info
->func
[0] |= PMBUS_HAVE_STATUS_FAN34
;
62 if (pmbus_check_word_register(client
, 0, PMBUS_READ_TEMPERATURE_1
))
63 info
->func
[0] |= PMBUS_HAVE_TEMP
;
64 if (pmbus_check_word_register(client
, 0, PMBUS_READ_TEMPERATURE_2
))
65 info
->func
[0] |= PMBUS_HAVE_TEMP2
;
66 if (pmbus_check_word_register(client
, 0, PMBUS_READ_TEMPERATURE_3
))
67 info
->func
[0] |= PMBUS_HAVE_TEMP3
;
68 if (info
->func
[0] & (PMBUS_HAVE_TEMP
| PMBUS_HAVE_TEMP2
70 && pmbus_check_byte_register(client
, 0,
71 PMBUS_STATUS_TEMPERATURE
))
72 info
->func
[0] |= PMBUS_HAVE_STATUS_TEMP
;
74 /* Sensors detected on all pages */
75 for (page
= 0; page
< info
->pages
; page
++) {
76 if (pmbus_check_word_register(client
, page
, PMBUS_READ_VOUT
)) {
77 info
->func
[page
] |= PMBUS_HAVE_VOUT
;
78 if (pmbus_check_byte_register(client
, page
,
80 info
->func
[page
] |= PMBUS_HAVE_STATUS_VOUT
;
82 if (pmbus_check_word_register(client
, page
, PMBUS_READ_IOUT
)) {
83 info
->func
[page
] |= PMBUS_HAVE_IOUT
;
84 if (pmbus_check_byte_register(client
, 0,
86 info
->func
[page
] |= PMBUS_HAVE_STATUS_IOUT
;
88 if (pmbus_check_word_register(client
, page
, PMBUS_READ_POUT
))
89 info
->func
[page
] |= PMBUS_HAVE_POUT
;
94 * Identify chip parameters.
96 static int pmbus_identify(struct i2c_client
*client
,
97 struct pmbus_driver_info
*info
)
103 * Check if the PAGE command is supported. If it is,
104 * keep setting the page number until it fails or until the
105 * maximum number of pages has been reached. Assume that
106 * this is the number of pages supported by the chip.
108 if (pmbus_check_byte_register(client
, 0, PMBUS_PAGE
)) {
111 for (page
= 1; page
< PMBUS_PAGES
; page
++) {
112 if (pmbus_set_page(client
, page
) < 0)
115 pmbus_set_page(client
, 0);
122 if (pmbus_check_byte_register(client
, 0, PMBUS_VOUT_MODE
)) {
125 vout_mode
= pmbus_read_byte_data(client
, 0, PMBUS_VOUT_MODE
);
126 if (vout_mode
>= 0 && vout_mode
!= 0xff) {
127 switch (vout_mode
>> 5) {
131 info
->format
[PSC_VOLTAGE_OUT
] = vid
;
134 info
->format
[PSC_VOLTAGE_OUT
] = direct
;
144 * We should check if the COEFFICIENTS register is supported.
145 * If it is, and the chip is configured for direct mode, we can read
146 * the coefficients from the chip, one set per group of sensor
149 * To do this, we will need access to a chip which actually supports the
150 * COEFFICIENTS command, since the command is too complex to implement
151 * without testing it. Until then, abort if a chip configured for direct
154 if (info
->format
[PSC_VOLTAGE_OUT
] == direct
) {
159 /* Try to find sensor groups */
160 pmbus_find_sensor_groups(client
, info
);
165 static int pmbus_probe(struct i2c_client
*client
,
166 const struct i2c_device_id
*id
)
168 struct pmbus_driver_info
*info
;
170 info
= devm_kzalloc(&client
->dev
, sizeof(struct pmbus_driver_info
),
175 info
->pages
= id
->driver_data
;
176 info
->identify
= pmbus_identify
;
178 return pmbus_do_probe(client
, id
, info
);
182 * Use driver_data to set the number of pages supported by the chip.
184 static const struct i2c_device_id pmbus_id
[] = {
200 MODULE_DEVICE_TABLE(i2c
, pmbus_id
);
202 /* This is the driver that will be inserted */
203 static struct i2c_driver pmbus_driver
= {
207 .probe
= pmbus_probe
,
208 .remove
= pmbus_do_remove
,
209 .id_table
= pmbus_id
,
212 module_i2c_driver(pmbus_driver
);
214 MODULE_AUTHOR("Guenter Roeck");
215 MODULE_DESCRIPTION("Generic PMBus driver");
216 MODULE_LICENSE("GPL");
This page took 0.034504 seconds and 5 git commands to generate.