ide: turn set_irq() method into write_devctl() method
[deliverable/linux.git] / drivers / ide / ns87415.c
1 /*
2 * Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com>
3 * Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be>
4 * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
5 * Copyright (C) 2004 Grant Grundler <grundler at parisc-linux.org>
6 *
7 * Inspired by an earlier effort from David S. Miller <davem@redhat.com>
8 */
9
10 #include <linux/module.h>
11 #include <linux/types.h>
12 #include <linux/kernel.h>
13 #include <linux/interrupt.h>
14 #include <linux/pci.h>
15 #include <linux/delay.h>
16 #include <linux/ide.h>
17 #include <linux/init.h>
18
19 #include <asm/io.h>
20
21 #define DRV_NAME "ns87415"
22
23 #ifdef CONFIG_SUPERIO
24 /* SUPERIO 87560 is a PoS chip that NatSem denies exists.
25 * Unfortunately, it's built-in on all Astro-based PA-RISC workstations
26 * which use the integrated NS87514 cell for CD-ROM support.
27 * i.e we have to support for CD-ROM installs.
28 * See drivers/parisc/superio.c for more gory details.
29 */
30 #include <asm/superio.h>
31
32 #define SUPERIO_IDE_MAX_RETRIES 25
33
34 /* Because of a defect in Super I/O, all reads of the PCI DMA status
35 * registers, IDE status register and the IDE select register need to be
36 * retried
37 */
38 static u8 superio_ide_inb (unsigned long port)
39 {
40 u8 tmp;
41 int retries = SUPERIO_IDE_MAX_RETRIES;
42
43 /* printk(" [ reading port 0x%x with retry ] ", port); */
44
45 do {
46 tmp = inb(port);
47 if (tmp == 0)
48 udelay(50);
49 } while (tmp == 0 && retries-- > 0);
50
51 return tmp;
52 }
53
54 static u8 superio_read_status(ide_hwif_t *hwif)
55 {
56 return superio_ide_inb(hwif->io_ports.status_addr);
57 }
58
59 static u8 superio_dma_sff_read_status(ide_hwif_t *hwif)
60 {
61 return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS);
62 }
63
64 static void superio_tf_read(ide_drive_t *drive, struct ide_cmd *cmd)
65 {
66 struct ide_io_ports *io_ports = &drive->hwif->io_ports;
67 struct ide_taskfile *tf = &cmd->tf;
68
69 if (cmd->ftf_flags & IDE_FTFLAG_IN_DATA) {
70 u16 data = inw(io_ports->data_addr);
71
72 tf->data = data & 0xff;
73 tf->hob_data = (data >> 8) & 0xff;
74 }
75
76 /* be sure we're looking at the low order bits */
77 outb(ATA_DEVCTL_OBS, io_ports->ctl_addr);
78
79 if (cmd->tf_flags & IDE_TFLAG_IN_FEATURE)
80 tf->feature = inb(io_ports->feature_addr);
81 if (cmd->tf_flags & IDE_TFLAG_IN_NSECT)
82 tf->nsect = inb(io_ports->nsect_addr);
83 if (cmd->tf_flags & IDE_TFLAG_IN_LBAL)
84 tf->lbal = inb(io_ports->lbal_addr);
85 if (cmd->tf_flags & IDE_TFLAG_IN_LBAM)
86 tf->lbam = inb(io_ports->lbam_addr);
87 if (cmd->tf_flags & IDE_TFLAG_IN_LBAH)
88 tf->lbah = inb(io_ports->lbah_addr);
89 if (cmd->tf_flags & IDE_TFLAG_IN_DEVICE)
90 tf->device = superio_ide_inb(io_ports->device_addr);
91
92 if (cmd->tf_flags & IDE_TFLAG_LBA48) {
93 outb(ATA_HOB | ATA_DEVCTL_OBS, io_ports->ctl_addr);
94
95 if (cmd->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
96 tf->hob_feature = inb(io_ports->feature_addr);
97 if (cmd->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
98 tf->hob_nsect = inb(io_ports->nsect_addr);
99 if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
100 tf->hob_lbal = inb(io_ports->lbal_addr);
101 if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
102 tf->hob_lbam = inb(io_ports->lbam_addr);
103 if (cmd->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
104 tf->hob_lbah = inb(io_ports->lbah_addr);
105 }
106 }
107
108 static const struct ide_tp_ops superio_tp_ops = {
109 .exec_command = ide_exec_command,
110 .read_status = superio_read_status,
111 .read_altstatus = ide_read_altstatus,
112 .write_devctl = ide_write_devctl,
113
114 .tf_load = ide_tf_load,
115 .tf_read = superio_tf_read,
116
117 .input_data = ide_input_data,
118 .output_data = ide_output_data,
119 };
120
121 static void __devinit superio_init_iops(struct hwif_s *hwif)
122 {
123 struct pci_dev *pdev = to_pci_dev(hwif->dev);
124 u32 dma_stat;
125 u8 port = hwif->channel, tmp;
126
127 dma_stat = (pci_resource_start(pdev, 4) & ~3) + (!port ? 2 : 0xa);
128
129 /* Clear error/interrupt, enable dma */
130 tmp = superio_ide_inb(dma_stat);
131 outb(tmp | 0x66, dma_stat);
132 }
133 #else
134 #define superio_dma_sff_read_status ide_dma_sff_read_status
135 #endif
136
137 static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
138
139 /*
140 * This routine either enables/disables (according to IDE_DFLAG_PRESENT)
141 * the IRQ associated with the port,
142 * and selects either PIO or DMA handshaking for the next I/O operation.
143 */
144 static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
145 {
146 ide_hwif_t *hwif = drive->hwif;
147 struct pci_dev *dev = to_pci_dev(hwif->dev);
148 unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
149 unsigned long flags;
150
151 local_irq_save(flags);
152 new = *old;
153
154 /* Adjust IRQ enable bit */
155 bit = 1 << (8 + hwif->channel);
156
157 if (drive->dev_flags & IDE_DFLAG_PRESENT)
158 new &= ~bit;
159 else
160 new |= bit;
161
162 /* Select PIO or DMA, DMA may only be selected for one drive/channel. */
163 bit = 1 << (20 + (drive->dn & 1) + (hwif->channel << 1));
164 other = 1 << (20 + (1 - (drive->dn & 1)) + (hwif->channel << 1));
165 new = use_dma ? ((new & ~other) | bit) : (new & ~bit);
166
167 if (new != *old) {
168 unsigned char stat;
169
170 /*
171 * Don't change DMA engine settings while Write Buffers
172 * are busy.
173 */
174 (void) pci_read_config_byte(dev, 0x43, &stat);
175 while (stat & 0x03) {
176 udelay(1);
177 (void) pci_read_config_byte(dev, 0x43, &stat);
178 }
179
180 *old = new;
181 (void) pci_write_config_dword(dev, 0x40, new);
182
183 /*
184 * And let things settle...
185 */
186 udelay(10);
187 }
188
189 local_irq_restore(flags);
190 }
191
192 static void ns87415_selectproc (ide_drive_t *drive)
193 {
194 ns87415_prepare_drive(drive,
195 !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
196 }
197
198 static void ns87415_dma_start(ide_drive_t *drive)
199 {
200 ns87415_prepare_drive(drive, 1);
201 ide_dma_start(drive);
202 }
203
204 static int ns87415_dma_end(ide_drive_t *drive)
205 {
206 ide_hwif_t *hwif = drive->hwif;
207 u8 dma_stat = 0, dma_cmd = 0;
208
209 dma_stat = hwif->dma_ops->dma_sff_read_status(hwif);
210 /* get DMA command mode */
211 dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
212 /* stop DMA */
213 outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
214 /* from ERRATA: clear the INTR & ERROR bits */
215 dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
216 outb(dma_cmd | 6, hwif->dma_base + ATA_DMA_CMD);
217
218 ns87415_prepare_drive(drive, 0);
219
220 /* verify good DMA status */
221 return (dma_stat & 7) != 4;
222 }
223
224 static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
225 {
226 struct pci_dev *dev = to_pci_dev(hwif->dev);
227 unsigned int ctrl, using_inta;
228 u8 progif;
229 #ifdef __sparc_v9__
230 int timeout;
231 u8 stat;
232 #endif
233
234 /*
235 * We cannot probe for IRQ: both ports share common IRQ on INTA.
236 * Also, leave IRQ masked during drive probing, to prevent infinite
237 * interrupts from a potentially floating INTA..
238 *
239 * IRQs get unmasked in selectproc when drive is first used.
240 */
241 (void) pci_read_config_dword(dev, 0x40, &ctrl);
242 (void) pci_read_config_byte(dev, 0x09, &progif);
243 /* is irq in "native" mode? */
244 using_inta = progif & (1 << (hwif->channel << 1));
245 if (!using_inta)
246 using_inta = ctrl & (1 << (4 + hwif->channel));
247 if (hwif->mate) {
248 hwif->select_data = hwif->mate->select_data;
249 } else {
250 hwif->select_data = (unsigned long)
251 &ns87415_control[ns87415_count++];
252 ctrl |= (1 << 8) | (1 << 9); /* mask both IRQs */
253 if (using_inta)
254 ctrl &= ~(1 << 6); /* unmask INTA */
255 *((unsigned int *)hwif->select_data) = ctrl;
256 (void) pci_write_config_dword(dev, 0x40, ctrl);
257
258 /*
259 * Set prefetch size to 512 bytes for both ports,
260 * but don't turn on/off prefetching here.
261 */
262 pci_write_config_byte(dev, 0x55, 0xee);
263
264 #ifdef __sparc_v9__
265 /*
266 * XXX: Reset the device, if we don't it will not respond to
267 * SELECT_DRIVE() properly during first ide_probe_port().
268 */
269 timeout = 10000;
270 outb(12, hwif->io_ports.ctl_addr);
271 udelay(10);
272 outb(8, hwif->io_ports.ctl_addr);
273 do {
274 udelay(50);
275 stat = hwif->tp_ops->read_status(hwif);
276 if (stat == 0xff)
277 break;
278 } while ((stat & ATA_BUSY) && --timeout);
279 #endif
280 }
281
282 if (!using_inta)
283 hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel);
284
285 if (!hwif->dma_base)
286 return;
287
288 outb(0x60, hwif->dma_base + ATA_DMA_STATUS);
289 }
290
291 static const struct ide_port_ops ns87415_port_ops = {
292 .selectproc = ns87415_selectproc,
293 };
294
295 static const struct ide_dma_ops ns87415_dma_ops = {
296 .dma_host_set = ide_dma_host_set,
297 .dma_setup = ide_dma_setup,
298 .dma_start = ns87415_dma_start,
299 .dma_end = ns87415_dma_end,
300 .dma_test_irq = ide_dma_test_irq,
301 .dma_lost_irq = ide_dma_lost_irq,
302 .dma_timer_expiry = ide_dma_sff_timer_expiry,
303 .dma_sff_read_status = superio_dma_sff_read_status,
304 };
305
306 static const struct ide_port_info ns87415_chipset __devinitdata = {
307 .name = DRV_NAME,
308 .init_hwif = init_hwif_ns87415,
309 .port_ops = &ns87415_port_ops,
310 .dma_ops = &ns87415_dma_ops,
311 .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
312 IDE_HFLAG_NO_ATAPI_DMA,
313 };
314
315 static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
316 {
317 struct ide_port_info d = ns87415_chipset;
318
319 #ifdef CONFIG_SUPERIO
320 if (PCI_SLOT(dev->devfn) == 0xE) {
321 /* Built-in - assume it's under superio. */
322 d.init_iops = superio_init_iops;
323 d.tp_ops = &superio_tp_ops;
324 }
325 #endif
326 return ide_pci_init_one(dev, &d, NULL);
327 }
328
329 static const struct pci_device_id ns87415_pci_tbl[] = {
330 { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87415), 0 },
331 { 0, },
332 };
333 MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl);
334
335 static struct pci_driver ns87415_pci_driver = {
336 .name = "NS87415_IDE",
337 .id_table = ns87415_pci_tbl,
338 .probe = ns87415_init_one,
339 .remove = ide_pci_remove,
340 .suspend = ide_pci_suspend,
341 .resume = ide_pci_resume,
342 };
343
344 static int __init ns87415_ide_init(void)
345 {
346 return ide_pci_register_driver(&ns87415_pci_driver);
347 }
348
349 static void __exit ns87415_ide_exit(void)
350 {
351 pci_unregister_driver(&ns87415_pci_driver);
352 }
353
354 module_init(ns87415_ide_init);
355 module_exit(ns87415_ide_exit);
356
357 MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick");
358 MODULE_DESCRIPTION("PCI driver module for NS87415 IDE");
359 MODULE_LICENSE("GPL");
This page took 0.04024 seconds and 6 git commands to generate.