ide: use PCI_VDEVICE() macro
[deliverable/linux.git] / drivers / ide / pci / aec62xx.c
1 /*
2 * linux/drivers/ide/pci/aec62xx.c Version 0.25 Aug 1, 2007
3 *
4 * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
5 * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
6 *
7 */
8
9 #include <linux/module.h>
10 #include <linux/types.h>
11 #include <linux/pci.h>
12 #include <linux/delay.h>
13 #include <linux/hdreg.h>
14 #include <linux/ide.h>
15 #include <linux/init.h>
16
17 #include <asm/io.h>
18
19 struct chipset_bus_clock_list_entry {
20 u8 xfer_speed;
21 u8 chipset_settings;
22 u8 ultra_settings;
23 };
24
25 static const struct chipset_bus_clock_list_entry aec6xxx_33_base [] = {
26 { XFER_UDMA_6, 0x31, 0x07 },
27 { XFER_UDMA_5, 0x31, 0x06 },
28 { XFER_UDMA_4, 0x31, 0x05 },
29 { XFER_UDMA_3, 0x31, 0x04 },
30 { XFER_UDMA_2, 0x31, 0x03 },
31 { XFER_UDMA_1, 0x31, 0x02 },
32 { XFER_UDMA_0, 0x31, 0x01 },
33
34 { XFER_MW_DMA_2, 0x31, 0x00 },
35 { XFER_MW_DMA_1, 0x31, 0x00 },
36 { XFER_MW_DMA_0, 0x0a, 0x00 },
37 { XFER_PIO_4, 0x31, 0x00 },
38 { XFER_PIO_3, 0x33, 0x00 },
39 { XFER_PIO_2, 0x08, 0x00 },
40 { XFER_PIO_1, 0x0a, 0x00 },
41 { XFER_PIO_0, 0x00, 0x00 },
42 { 0, 0x00, 0x00 }
43 };
44
45 static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
46 { XFER_UDMA_6, 0x41, 0x06 },
47 { XFER_UDMA_5, 0x41, 0x05 },
48 { XFER_UDMA_4, 0x41, 0x04 },
49 { XFER_UDMA_3, 0x41, 0x03 },
50 { XFER_UDMA_2, 0x41, 0x02 },
51 { XFER_UDMA_1, 0x41, 0x01 },
52 { XFER_UDMA_0, 0x41, 0x01 },
53
54 { XFER_MW_DMA_2, 0x41, 0x00 },
55 { XFER_MW_DMA_1, 0x42, 0x00 },
56 { XFER_MW_DMA_0, 0x7a, 0x00 },
57 { XFER_PIO_4, 0x41, 0x00 },
58 { XFER_PIO_3, 0x43, 0x00 },
59 { XFER_PIO_2, 0x78, 0x00 },
60 { XFER_PIO_1, 0x7a, 0x00 },
61 { XFER_PIO_0, 0x70, 0x00 },
62 { 0, 0x00, 0x00 }
63 };
64
65 #define BUSCLOCK(D) \
66 ((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D)))
67
68
69 /*
70 * TO DO: active tuning and correction of cards without a bios.
71 */
72 static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
73 {
74 for ( ; chipset_table->xfer_speed ; chipset_table++)
75 if (chipset_table->xfer_speed == speed) {
76 return chipset_table->chipset_settings;
77 }
78 return chipset_table->chipset_settings;
79 }
80
81 static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
82 {
83 for ( ; chipset_table->xfer_speed ; chipset_table++)
84 if (chipset_table->xfer_speed == speed) {
85 return chipset_table->ultra_settings;
86 }
87 return chipset_table->ultra_settings;
88 }
89
90 static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
91 {
92 ide_hwif_t *hwif = HWIF(drive);
93 struct pci_dev *dev = hwif->pci_dev;
94 u16 d_conf = 0;
95 u8 ultra = 0, ultra_conf = 0;
96 u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
97 unsigned long flags;
98
99 local_irq_save(flags);
100 /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
101 pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
102 tmp0 = pci_bus_clock_list(speed, BUSCLOCK(dev));
103 d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf);
104 pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf);
105
106 tmp1 = 0x00;
107 tmp2 = 0x00;
108 pci_read_config_byte(dev, 0x54, &ultra);
109 tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn))));
110 ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev));
111 tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn))));
112 pci_write_config_byte(dev, 0x54, tmp2);
113 local_irq_restore(flags);
114 }
115
116 static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
117 {
118 ide_hwif_t *hwif = HWIF(drive);
119 struct pci_dev *dev = hwif->pci_dev;
120 u8 unit = (drive->select.b.unit & 0x01);
121 u8 tmp1 = 0, tmp2 = 0;
122 u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
123 unsigned long flags;
124
125 local_irq_save(flags);
126 /* high 4-bits: Active, low 4-bits: Recovery */
127 pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf);
128 drive_conf = pci_bus_clock_list(speed, BUSCLOCK(dev));
129 pci_write_config_byte(dev, 0x40|drive->dn, drive_conf);
130
131 pci_read_config_byte(dev, (0x44|hwif->channel), &ultra);
132 tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit))));
133 ultra_conf = pci_bus_clock_list_ultra(speed, BUSCLOCK(dev));
134 tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit))));
135 pci_write_config_byte(dev, (0x44|hwif->channel), tmp2);
136 local_irq_restore(flags);
137 }
138
139 static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
140 {
141 drive->hwif->set_dma_mode(drive, pio + XFER_PIO_0);
142 }
143
144 static void aec62xx_dma_lost_irq (ide_drive_t *drive)
145 {
146 switch (HWIF(drive)->pci_dev->device) {
147 case PCI_DEVICE_ID_ARTOP_ATP860:
148 case PCI_DEVICE_ID_ARTOP_ATP860R:
149 case PCI_DEVICE_ID_ARTOP_ATP865:
150 case PCI_DEVICE_ID_ARTOP_ATP865R:
151 printk(" AEC62XX time out ");
152 default:
153 break;
154 }
155 }
156
157 static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
158 {
159 int bus_speed = system_bus_clock();
160
161 if (bus_speed <= 33)
162 pci_set_drvdata(dev, (void *) aec6xxx_33_base);
163 else
164 pci_set_drvdata(dev, (void *) aec6xxx_34_base);
165
166 /* These are necessary to get AEC6280 Macintosh cards to work */
167 if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
168 (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
169 u8 reg49h = 0, reg4ah = 0;
170 /* Clear reset and test bits. */
171 pci_read_config_byte(dev, 0x49, &reg49h);
172 pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
173 /* Enable chip interrupt output. */
174 pci_read_config_byte(dev, 0x4a, &reg4ah);
175 pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
176 /* Enable burst mode. */
177 pci_read_config_byte(dev, 0x4a, &reg4ah);
178 pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
179 }
180
181 return dev->irq;
182 }
183
184 static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
185 {
186 struct pci_dev *dev = hwif->pci_dev;
187 u8 reg54 = 0, mask = hwif->channel ? 0xf0 : 0x0f;
188 unsigned long flags;
189
190 hwif->set_pio_mode = &aec_set_pio_mode;
191
192 if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
193 if(hwif->mate)
194 hwif->mate->serialized = hwif->serialized = 1;
195 hwif->set_dma_mode = &aec6210_set_mode;
196 } else
197 hwif->set_dma_mode = &aec6260_set_mode;
198
199 hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
200
201 if (hwif->dma_base == 0)
202 return;
203
204 hwif->ultra_mask = hwif->cds->udma_mask;
205 hwif->mwdma_mask = 0x07;
206
207 hwif->dma_lost_irq = &aec62xx_dma_lost_irq;
208
209 if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
210 spin_lock_irqsave(&ide_lock, flags);
211 pci_read_config_byte (dev, 0x54, &reg54);
212 pci_write_config_byte(dev, 0x54, (reg54 & ~mask));
213 spin_unlock_irqrestore(&ide_lock, flags);
214 } else if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
215 u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
216
217 pci_read_config_byte(hwif->pci_dev, 0x49, &ata66);
218
219 hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
220 }
221
222 if (!noautodma)
223 hwif->autodma = 1;
224 hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
225 }
226
227 static int __devinit init_setup_aec62xx(struct pci_dev *dev, ide_pci_device_t *d)
228 {
229 return ide_setup_pci_device(dev, d);
230 }
231
232 static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d)
233 {
234 unsigned long dma_base = pci_resource_start(dev, 4);
235
236 if (inb(dma_base + 2) & 0x10) {
237 d->name = (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) ?
238 "AEC6880R" : "AEC6880";
239 d->udma_mask = 0x7f; /* udma0-6 */
240 }
241
242 return ide_setup_pci_device(dev, d);
243 }
244
245 static ide_pci_device_t aec62xx_chipsets[] __devinitdata = {
246 { /* 0 */
247 .name = "AEC6210",
248 .init_setup = init_setup_aec62xx,
249 .init_chipset = init_chipset_aec62xx,
250 .init_hwif = init_hwif_aec62xx,
251 .autodma = AUTODMA,
252 .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
253 .bootable = OFF_BOARD,
254 .pio_mask = ATA_PIO4,
255 .udma_mask = 0x07, /* udma0-2 */
256 },{ /* 1 */
257 .name = "AEC6260",
258 .init_setup = init_setup_aec62xx,
259 .init_chipset = init_chipset_aec62xx,
260 .init_hwif = init_hwif_aec62xx,
261 .autodma = NOAUTODMA,
262 .bootable = OFF_BOARD,
263 .pio_mask = ATA_PIO4,
264 .udma_mask = 0x1f, /* udma0-4 */
265 },{ /* 2 */
266 .name = "AEC6260R",
267 .init_setup = init_setup_aec62xx,
268 .init_chipset = init_chipset_aec62xx,
269 .init_hwif = init_hwif_aec62xx,
270 .autodma = AUTODMA,
271 .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
272 .bootable = NEVER_BOARD,
273 .pio_mask = ATA_PIO4,
274 .udma_mask = 0x1f, /* udma0-4 */
275 },{ /* 3 */
276 .name = "AEC6280",
277 .init_setup = init_setup_aec6x80,
278 .init_chipset = init_chipset_aec62xx,
279 .init_hwif = init_hwif_aec62xx,
280 .autodma = AUTODMA,
281 .bootable = OFF_BOARD,
282 .pio_mask = ATA_PIO4,
283 .udma_mask = 0x3f, /* udma0-5 */
284 },{ /* 4 */
285 .name = "AEC6280R",
286 .init_setup = init_setup_aec6x80,
287 .init_chipset = init_chipset_aec62xx,
288 .init_hwif = init_hwif_aec62xx,
289 .autodma = AUTODMA,
290 .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
291 .bootable = OFF_BOARD,
292 .pio_mask = ATA_PIO4,
293 .udma_mask = 0x3f, /* udma0-5 */
294 }
295 };
296
297 /**
298 * aec62xx_init_one - called when a AEC is found
299 * @dev: the aec62xx device
300 * @id: the matching pci id
301 *
302 * Called when the PCI registration layer (or the IDE initialization)
303 * finds a device matching our IDE device tables.
304 *
305 * NOTE: since we're going to modify the 'name' field for AEC-6[26]80[R]
306 * chips, pass a local copy of 'struct pci_device_id' down the call chain.
307 */
308
309 static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
310 {
311 ide_pci_device_t d = aec62xx_chipsets[id->driver_data];
312
313 return d.init_setup(dev, &d);
314 }
315
316 static const struct pci_device_id aec62xx_pci_tbl[] = {
317 { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 },
318 { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860), 1 },
319 { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R), 2 },
320 { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865), 3 },
321 { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R), 4 },
322 { 0, },
323 };
324 MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
325
326 static struct pci_driver driver = {
327 .name = "AEC62xx_IDE",
328 .id_table = aec62xx_pci_tbl,
329 .probe = aec62xx_init_one,
330 };
331
332 static int __init aec62xx_ide_init(void)
333 {
334 return ide_pci_register_driver(&driver);
335 }
336
337 module_init(aec62xx_ide_init);
338
339 MODULE_AUTHOR("Andre Hedrick");
340 MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE");
341 MODULE_LICENSE("GPL");
This page took 0.175414 seconds and 5 git commands to generate.