drivers/ide/pci/slc90e66.c

   1 /*
   2  *  linux/drivers/ide/pci/slc90e66.c    Version 0.19    Sep 24, 2007
   3  *
   4  *  Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
   5  *  Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
   6  *
   7  * This is a look-alike variation of the ICH0 PIIX4 Ultra-66,
   8  * but this keeps the ISA-Bridge and slots alive.
   9  *
  10  */
  11
  12 #include <linux/types.h>
  13 #include <linux/module.h>
  14 #include <linux/kernel.h>
  15 #include <linux/ioport.h>
  16 #include <linux/pci.h>
  17 #include <linux/hdreg.h>
  18 #include <linux/ide.h>
  19 #include <linux/delay.h>
  20 #include <linux/init.h>
  21
  22 #include <asm/io.h>
  23
  24 static DEFINE_SPINLOCK(slc90e66_lock);
  25
  26 static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
  27 {
  28         ide_hwif_t *hwif        = HWIF(drive);
  29         struct pci_dev *dev     = to_pci_dev(hwif->dev);
  30         int is_slave            = drive->dn & 1;
  31         int master_port         = hwif->channel ? 0x42 : 0x40;
  32         int slave_port          = 0x44;
  33         unsigned long flags;
  34         u16 master_data;
  35         u8 slave_data;
  36         int control = 0;
  37                                      /* ISP  RTC */
  38         static const u8 timings[][2]= {
  39                                         { 0, 0 },
  40                                         { 0, 0 },
  41                                         { 1, 0 },
  42                                         { 2, 1 },
  43                                         { 2, 3 }, };
  44
  45         spin_lock_irqsave(&slc90e66_lock, flags);
  46         pci_read_config_word(dev, master_port, &master_data);
  47
  48         if (pio > 1)
  49                 control |= 1;   /* Programmable timing on */
  50         if (drive->media == ide_disk)
  51                 control |= 4;   /* Prefetch, post write */
  52         if (pio > 2)
  53                 control |= 2;   /* IORDY */
  54         if (is_slave) {
  55                 master_data |=  0x4000;
  56                 master_data &= ~0x0070;
  57                 if (pio > 1) {
  58                         /* Set PPE, IE and TIME */
  59                         master_data |= control << 4;
  60                 }
  61                 pci_read_config_byte(dev, slave_port, &slave_data);
  62                 slave_data &= hwif->channel ? 0x0f : 0xf0;
  63                 slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
  64                                (hwif->channel ? 4 : 0);
  65         } else {
  66                 master_data &= ~0x3307;
  67                 if (pio > 1) {
  68                         /* enable PPE, IE and TIME */
  69                         master_data |= control;
  70                 }
  71                 master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
  72         }
  73         pci_write_config_word(dev, master_port, master_data);
  74         if (is_slave)
  75                 pci_write_config_byte(dev, slave_port, slave_data);
  76         spin_unlock_irqrestore(&slc90e66_lock, flags);
  77 }
  78
  79 static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
  80 {
  81         ide_hwif_t *hwif        = HWIF(drive);
  82         struct pci_dev *dev     = to_pci_dev(hwif->dev);
  83         u8 maslave              = hwif->channel ? 0x42 : 0x40;
  84         int sitre = 0, a_speed  = 7 << (drive->dn * 4);
  85         int u_speed = 0, u_flag = 1 << drive->dn;
  86         u16                     reg4042, reg44, reg48, reg4a;
  87
  88         pci_read_config_word(dev, maslave, &reg4042);
  89         sitre = (reg4042 & 0x4000) ? 1 : 0;
  90         pci_read_config_word(dev, 0x44, &reg44);
  91         pci_read_config_word(dev, 0x48, &reg48);
  92         pci_read_config_word(dev, 0x4a, &reg4a);
  93
  94         if (speed >= XFER_UDMA_0) {
  95                 u_speed = (speed - XFER_UDMA_0) << (drive->dn * 4);
  96
  97                 if (!(reg48 & u_flag))
  98                         pci_write_config_word(dev, 0x48, reg48|u_flag);
  99                 /* FIXME: (reg4a & a_speed) ? */
 100                 if ((reg4a & u_speed) != u_speed) {
 101                         pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
 102                         pci_read_config_word(dev, 0x4a, &reg4a);
 103                         pci_write_config_word(dev, 0x4a, reg4a|u_speed);
 104                 }
 105         } else {
 106                 const u8 mwdma_to_pio[] = { 0, 3, 4 };
 107                 u8 pio;
 108
 109                 if (reg48 & u_flag)
 110                         pci_write_config_word(dev, 0x48, reg48 & ~u_flag);
 111                 if (reg4a & a_speed)
 112                         pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
 113
 114                 if (speed >= XFER_MW_DMA_0)
 115                         pio = mwdma_to_pio[speed - XFER_MW_DMA_0];
 116                 else
 117                         pio = 2; /* only SWDMA2 is allowed */
 118
 119                 slc90e66_set_pio_mode(drive, pio);
 120         }
 121 }
 122
 123 static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif)
 124 {
 125         struct pci_dev *dev = to_pci_dev(hwif->dev);
 126         u8 reg47 = 0;
 127         u8 mask = hwif->channel ? 0x01 : 0x02;  /* bit0:Primary */
 128
 129         hwif->set_pio_mode = &slc90e66_set_pio_mode;
 130         hwif->set_dma_mode = &slc90e66_set_dma_mode;
 131
 132         pci_read_config_byte(dev, 0x47, &reg47);
 133
 134         if (hwif->dma_base == 0)
 135                 return;
 136
 137         if (hwif->cbl != ATA_CBL_PATA40_SHORT)
 138                 /* bit[0(1)]: 0:80, 1:40 */
 139                 hwif->cbl = (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
 140 }
 141
 142 static const struct ide_port_info slc90e66_chipset __devinitdata = {
 143         .name           = "SLC90E66",
 144         .init_hwif      = init_hwif_slc90e66,
 145         .enablebits     = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
 146         .host_flags     = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
 147         .pio_mask       = ATA_PIO4,
 148         .swdma_mask     = ATA_SWDMA2_ONLY,
 149         .mwdma_mask     = ATA_MWDMA12_ONLY,
 150         .udma_mask      = ATA_UDMA4,
 151 };
 152
 153 static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 154 {
 155         return ide_setup_pci_device(dev, &slc90e66_chipset);
 156 }
 157
 158 static const struct pci_device_id slc90e66_pci_tbl[] = {
 159         { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1), 0 },
 160         { 0, },
 161 };
 162 MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl);
 163
 164 static struct pci_driver driver = {
 165         .name           = "SLC90e66_IDE",
 166         .id_table       = slc90e66_pci_tbl,
 167         .probe          = slc90e66_init_one,
 168 };
 169
 170 static int __init slc90e66_ide_init(void)
 171 {
 172         return ide_pci_register_driver(&driver);
 173 }
 174
 175 module_init(slc90e66_ide_init);
 176
 177 MODULE_AUTHOR("Andre Hedrick");
 178 MODULE_DESCRIPTION("PCI driver module for SLC90E66 IDE");
 179 MODULE_LICENSE("GPL");