projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'i2c/for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
[deliverable/linux.git] / drivers / iio / gyro / bmg160_core.c
1 /*
2 * BMG160 Gyro Sensor driver
3 * Copyright (c) 2014, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 */
14
15 #include <linux/module.h>
16 #include <linux/interrupt.h>
17 #include <linux/delay.h>
18 #include <linux/slab.h>
19 #include <linux/acpi.h>
20 #include <linux/gpio/consumer.h>
21 #include <linux/pm.h>
22 #include <linux/pm_runtime.h>
23 #include <linux/iio/iio.h>
24 #include <linux/iio/sysfs.h>
25 #include <linux/iio/buffer.h>
26 #include <linux/iio/trigger.h>
27 #include <linux/iio/events.h>
28 #include <linux/iio/trigger_consumer.h>
29 #include <linux/iio/triggered_buffer.h>
30 #include <linux/regmap.h>
31 #include "bmg160.h"
32
33 #define BMG160_IRQ_NAME "bmg160_event"
34 #define BMG160_GPIO_NAME "gpio_int"
35
36 #define BMG160_REG_CHIP_ID 0x00
37 #define BMG160_CHIP_ID_VAL 0x0F
38
39 #define BMG160_REG_PMU_LPW 0x11
40 #define BMG160_MODE_NORMAL 0x00
41 #define BMG160_MODE_DEEP_SUSPEND 0x20
42 #define BMG160_MODE_SUSPEND 0x80
43
44 #define BMG160_REG_RANGE 0x0F
45
46 #define BMG160_RANGE_2000DPS 0
47 #define BMG160_RANGE_1000DPS 1
48 #define BMG160_RANGE_500DPS 2
49 #define BMG160_RANGE_250DPS 3
50 #define BMG160_RANGE_125DPS 4
51
52 #define BMG160_REG_PMU_BW 0x10
53 #define BMG160_NO_FILTER 0
54 #define BMG160_DEF_BW 100
55
56 #define BMG160_REG_INT_MAP_0 0x17
57 #define BMG160_INT_MAP_0_BIT_ANY BIT(1)
58
59 #define BMG160_REG_INT_MAP_1 0x18
60 #define BMG160_INT_MAP_1_BIT_NEW_DATA BIT(0)
61
62 #define BMG160_REG_INT_RST_LATCH 0x21
63 #define BMG160_INT_MODE_LATCH_RESET 0x80
64 #define BMG160_INT_MODE_LATCH_INT 0x0F
65 #define BMG160_INT_MODE_NON_LATCH_INT 0x00
66
67 #define BMG160_REG_INT_EN_0 0x15
68 #define BMG160_DATA_ENABLE_INT BIT(7)
69
70 #define BMG160_REG_INT_EN_1 0x16
71 #define BMG160_INT1_BIT_OD BIT(1)
72
73 #define BMG160_REG_XOUT_L 0x02
74 #define BMG160_AXIS_TO_REG(axis) (BMG160_REG_XOUT_L + (axis * 2))
75
76 #define BMG160_REG_SLOPE_THRES 0x1B
77 #define BMG160_SLOPE_THRES_MASK 0x0F
78
79 #define BMG160_REG_MOTION_INTR 0x1C
80 #define BMG160_INT_MOTION_X BIT(0)
81 #define BMG160_INT_MOTION_Y BIT(1)
82 #define BMG160_INT_MOTION_Z BIT(2)
83 #define BMG160_ANY_DUR_MASK 0x30
84 #define BMG160_ANY_DUR_SHIFT 4
85
86 #define BMG160_REG_INT_STATUS_2 0x0B
87 #define BMG160_ANY_MOTION_MASK 0x07
88 #define BMG160_ANY_MOTION_BIT_X BIT(0)
89 #define BMG160_ANY_MOTION_BIT_Y BIT(1)
90 #define BMG160_ANY_MOTION_BIT_Z BIT(2)
91
92 #define BMG160_REG_TEMP 0x08
93 #define BMG160_TEMP_CENTER_VAL 23
94
95 #define BMG160_MAX_STARTUP_TIME_MS 80
96
97 #define BMG160_AUTO_SUSPEND_DELAY_MS 2000
98
99 struct bmg160_data {
100 struct device *dev;
101 struct regmap *regmap;
102 struct iio_trigger *dready_trig;
103 struct iio_trigger *motion_trig;
104 struct mutex mutex;
105 s16 buffer[8];
106 u8 bw_bits;
107 u32 dps_range;
108 int ev_enable_state;
109 int slope_thres;
110 bool dready_trigger_on;
111 bool motion_trigger_on;
112 int irq;
113 };
114
115 enum bmg160_axis {
116 AXIS_X,
117 AXIS_Y,
118 AXIS_Z,
119 };
120
121 static const struct {
122 int val;
123 int bw_bits;
124 } bmg160_samp_freq_table[] = { {100, 0x07},
125 {200, 0x06},
126 {400, 0x03},
127 {1000, 0x02},
128 {2000, 0x01} };
129
130 static const struct {
131 int scale;
132 int dps_range;
133 } bmg160_scale_table[] = { { 1065, BMG160_RANGE_2000DPS},
134 { 532, BMG160_RANGE_1000DPS},
135 { 266, BMG160_RANGE_500DPS},
136 { 133, BMG160_RANGE_250DPS},
137 { 66, BMG160_RANGE_125DPS} };
138
139 static int bmg160_set_mode(struct bmg160_data *data, u8 mode)
140 {
141 int ret;
142
143 ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW, mode);
144 if (ret < 0) {
145 dev_err(data->dev, "Error writing reg_pmu_lpw\n");
146 return ret;
147 }
148
149 return 0;
150 }
151
152 static int bmg160_convert_freq_to_bit(int val)
153 {
154 int i;
155
156 for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
157 if (bmg160_samp_freq_table[i].val == val)
158 return bmg160_samp_freq_table[i].bw_bits;
159 }
160
161 return -EINVAL;
162 }
163
164 static int bmg160_set_bw(struct bmg160_data *data, int val)
165 {
166 int ret;
167 int bw_bits;
168
169 bw_bits = bmg160_convert_freq_to_bit(val);
170 if (bw_bits < 0)
171 return bw_bits;
172
173 ret = regmap_write(data->regmap, BMG160_REG_PMU_BW, bw_bits);
174 if (ret < 0) {
175 dev_err(data->dev, "Error writing reg_pmu_bw\n");
176 return ret;
177 }
178
179 data->bw_bits = bw_bits;
180
181 return 0;
182 }
183
184 static int bmg160_chip_init(struct bmg160_data *data)
185 {
186 int ret;
187 unsigned int val;
188
189 ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
190 if (ret < 0) {
191 dev_err(data->dev, "Error reading reg_chip_id\n");
192 return ret;
193 }
194
195 dev_dbg(data->dev, "Chip Id %x\n", val);
196 if (val != BMG160_CHIP_ID_VAL) {
197 dev_err(data->dev, "invalid chip %x\n", val);
198 return -ENODEV;
199 }
200
201 ret = bmg160_set_mode(data, BMG160_MODE_NORMAL);
202 if (ret < 0)
203 return ret;
204
205 /* Wait upto 500 ms to be ready after changing mode */
206 usleep_range(500, 1000);
207
208 /* Set Bandwidth */
209 ret = bmg160_set_bw(data, BMG160_DEF_BW);
210 if (ret < 0)
211 return ret;
212
213 /* Set Default Range */
214 ret = regmap_write(data->regmap, BMG160_REG_RANGE, BMG160_RANGE_500DPS);
215 if (ret < 0) {
216 dev_err(data->dev, "Error writing reg_range\n");
217 return ret;
218 }
219 data->dps_range = BMG160_RANGE_500DPS;
220
221 ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES, &val);
222 if (ret < 0) {
223 dev_err(data->dev, "Error reading reg_slope_thres\n");
224 return ret;
225 }
226 data->slope_thres = val;
227
228 /* Set default interrupt mode */
229 ret = regmap_update_bits(data->regmap, BMG160_REG_INT_EN_1,
230 BMG160_INT1_BIT_OD, 0);
231 if (ret < 0) {
232 dev_err(data->dev, "Error updating bits in reg_int_en_1\n");
233 return ret;
234 }
235
236 ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
237 BMG160_INT_MODE_LATCH_INT |
238 BMG160_INT_MODE_LATCH_RESET);
239 if (ret < 0) {
240 dev_err(data->dev,
241 "Error writing reg_motion_intr\n");
242 return ret;
243 }
244
245 return 0;
246 }
247
248 static int bmg160_set_power_state(struct bmg160_data *data, bool on)
249 {
250 #ifdef CONFIG_PM
251 int ret;
252
253 if (on)
254 ret = pm_runtime_get_sync(data->dev);
255 else {
256 pm_runtime_mark_last_busy(data->dev);
257 ret = pm_runtime_put_autosuspend(data->dev);
258 }
259
260 if (ret < 0) {
261 dev_err(data->dev,
262 "Failed: bmg160_set_power_state for %d\n", on);
263 if (on)
264 pm_runtime_put_noidle(data->dev);
265
266 return ret;
267 }
268 #endif
269
270 return 0;
271 }
272
273 static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
274 bool status)
275 {
276 int ret;
277
278 /* Enable/Disable INT_MAP0 mapping */
279 ret = regmap_update_bits(data->regmap, BMG160_REG_INT_MAP_0,
280 BMG160_INT_MAP_0_BIT_ANY,
281 (status ? BMG160_INT_MAP_0_BIT_ANY : 0));
282 if (ret < 0) {
283 dev_err(data->dev, "Error updating bits reg_int_map0\n");
284 return ret;
285 }
286
287 /* Enable/Disable slope interrupts */
288 if (status) {
289 /* Update slope thres */
290 ret = regmap_write(data->regmap, BMG160_REG_SLOPE_THRES,
291 data->slope_thres);
292 if (ret < 0) {
293 dev_err(data->dev,
294 "Error writing reg_slope_thres\n");
295 return ret;
296 }
297
298 ret = regmap_write(data->regmap, BMG160_REG_MOTION_INTR,
299 BMG160_INT_MOTION_X | BMG160_INT_MOTION_Y |
300 BMG160_INT_MOTION_Z);
301 if (ret < 0) {
302 dev_err(data->dev,
303 "Error writing reg_motion_intr\n");
304 return ret;
305 }
306
307 /*
308 * New data interrupt is always non-latched,
309 * which will have higher priority, so no need
310 * to set latched mode, we will be flooded anyway with INTR
311 */
312 if (!data->dready_trigger_on) {
313 ret = regmap_write(data->regmap,
314 BMG160_REG_INT_RST_LATCH,
315 BMG160_INT_MODE_LATCH_INT |
316 BMG160_INT_MODE_LATCH_RESET);
317 if (ret < 0) {
318 dev_err(data->dev,
319 "Error writing reg_rst_latch\n");
320 return ret;
321 }
322 }
323
324 ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0,
325 BMG160_DATA_ENABLE_INT);
326
327 } else {
328 ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0);
329 }
330
331 if (ret < 0) {
332 dev_err(data->dev, "Error writing reg_int_en0\n");
333 return ret;
334 }
335
336 return 0;
337 }
338
339 static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
340 bool status)
341 {
342 int ret;
343
344 /* Enable/Disable INT_MAP1 mapping */
345 ret = regmap_update_bits(data->regmap, BMG160_REG_INT_MAP_1,
346 BMG160_INT_MAP_1_BIT_NEW_DATA,
347 (status ? BMG160_INT_MAP_1_BIT_NEW_DATA : 0));
348 if (ret < 0) {
349 dev_err(data->dev, "Error updating bits in reg_int_map1\n");
350 return ret;
351 }
352
353 if (status) {
354 ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
355 BMG160_INT_MODE_NON_LATCH_INT |
356 BMG160_INT_MODE_LATCH_RESET);
357 if (ret < 0) {
358 dev_err(data->dev,
359 "Error writing reg_rst_latch\n");
360 return ret;
361 }
362
363 ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0,
364 BMG160_DATA_ENABLE_INT);
365
366 } else {
367 /* Restore interrupt mode */
368 ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
369 BMG160_INT_MODE_LATCH_INT |
370 BMG160_INT_MODE_LATCH_RESET);
371 if (ret < 0) {
372 dev_err(data->dev,
373 "Error writing reg_rst_latch\n");
374 return ret;
375 }
376
377 ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0);
378 }
379
380 if (ret < 0) {
381 dev_err(data->dev, "Error writing reg_int_en0\n");
382 return ret;
383 }
384
385 return 0;
386 }
387
388 static int bmg160_get_bw(struct bmg160_data *data, int *val)
389 {
390 int i;
391
392 for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
393 if (bmg160_samp_freq_table[i].bw_bits == data->bw_bits) {
394 *val = bmg160_samp_freq_table[i].val;
395 return IIO_VAL_INT;
396 }
397 }
398
399 return -EINVAL;
400 }
401
402 static int bmg160_set_scale(struct bmg160_data *data, int val)
403 {
404 int ret, i;
405
406 for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
407 if (bmg160_scale_table[i].scale == val) {
408 ret = regmap_write(data->regmap, BMG160_REG_RANGE,
409 bmg160_scale_table[i].dps_range);
410 if (ret < 0) {
411 dev_err(data->dev,
412 "Error writing reg_range\n");
413 return ret;
414 }
415 data->dps_range = bmg160_scale_table[i].dps_range;
416 return 0;
417 }
418 }
419
420 return -EINVAL;
421 }
422
423 static int bmg160_get_temp(struct bmg160_data *data, int *val)
424 {
425 int ret;
426 unsigned int raw_val;
427
428 mutex_lock(&data->mutex);
429 ret = bmg160_set_power_state(data, true);
430 if (ret < 0) {
431 mutex_unlock(&data->mutex);
432 return ret;
433 }
434
435 ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val);
436 if (ret < 0) {
437 dev_err(data->dev, "Error reading reg_temp\n");
438 bmg160_set_power_state(data, false);
439 mutex_unlock(&data->mutex);
440 return ret;
441 }
442
443 *val = sign_extend32(raw_val, 7);
444 ret = bmg160_set_power_state(data, false);
445 mutex_unlock(&data->mutex);
446 if (ret < 0)
447 return ret;
448
449 return IIO_VAL_INT;
450 }
451
452 static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
453 {
454 int ret;
455 unsigned int raw_val;
456
457 mutex_lock(&data->mutex);
458 ret = bmg160_set_power_state(data, true);
459 if (ret < 0) {
460 mutex_unlock(&data->mutex);
461 return ret;
462 }
463
464 ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val,
465 2);
466 if (ret < 0) {
467 dev_err(data->dev, "Error reading axis %d\n", axis);
468 bmg160_set_power_state(data, false);
469 mutex_unlock(&data->mutex);
470 return ret;
471 }
472
473 *val = sign_extend32(raw_val, 15);
474 ret = bmg160_set_power_state(data, false);
475 mutex_unlock(&data->mutex);
476 if (ret < 0)
477 return ret;
478
479 return IIO_VAL_INT;
480 }
481
482 static int bmg160_read_raw(struct iio_dev *indio_dev,
483 struct iio_chan_spec const *chan,
484 int *val, int *val2, long mask)
485 {
486 struct bmg160_data *data = iio_priv(indio_dev);
487 int ret;
488
489 switch (mask) {
490 case IIO_CHAN_INFO_RAW:
491 switch (chan->type) {
492 case IIO_TEMP:
493 return bmg160_get_temp(data, val);
494 case IIO_ANGL_VEL:
495 if (iio_buffer_enabled(indio_dev))
496 return -EBUSY;
497 else
498 return bmg160_get_axis(data, chan->scan_index,
499 val);
500 default:
501 return -EINVAL;
502 }
503 case IIO_CHAN_INFO_OFFSET:
504 if (chan->type == IIO_TEMP) {
505 *val = BMG160_TEMP_CENTER_VAL;
506 return IIO_VAL_INT;
507 } else
508 return -EINVAL;
509 case IIO_CHAN_INFO_SCALE:
510 *val = 0;
511 switch (chan->type) {
512 case IIO_TEMP:
513 *val2 = 500000;
514 return IIO_VAL_INT_PLUS_MICRO;
515 case IIO_ANGL_VEL:
516 {
517 int i;
518
519 for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
520 if (bmg160_scale_table[i].dps_range ==
521 data->dps_range) {
522 *val2 = bmg160_scale_table[i].scale;
523 return IIO_VAL_INT_PLUS_MICRO;
524 }
525 }
526 return -EINVAL;
527 }
528 default:
529 return -EINVAL;
530 }
531 case IIO_CHAN_INFO_SAMP_FREQ:
532 *val2 = 0;
533 mutex_lock(&data->mutex);
534 ret = bmg160_get_bw(data, val);
535 mutex_unlock(&data->mutex);
536 return ret;
537 default:
538 return -EINVAL;
539 }
540 }
541
542 static int bmg160_write_raw(struct iio_dev *indio_dev,
543 struct iio_chan_spec const *chan,
544 int val, int val2, long mask)
545 {
546 struct bmg160_data *data = iio_priv(indio_dev);
547 int ret;
548
549 switch (mask) {
550 case IIO_CHAN_INFO_SAMP_FREQ:
551 mutex_lock(&data->mutex);
552 /*
553 * Section 4.2 of spec
554 * In suspend mode, the only supported operations are reading
555 * registers as well as writing to the (0x14) softreset
556 * register. Since we will be in suspend mode by default, change
557 * mode to power on for other writes.
558 */
559 ret = bmg160_set_power_state(data, true);
560 if (ret < 0) {
561 mutex_unlock(&data->mutex);
562 return ret;
563 }
564 ret = bmg160_set_bw(data, val);
565 if (ret < 0) {
566 bmg160_set_power_state(data, false);
567 mutex_unlock(&data->mutex);
568 return ret;
569 }
570 ret = bmg160_set_power_state(data, false);
571 mutex_unlock(&data->mutex);
572 return ret;
573 case IIO_CHAN_INFO_SCALE:
574 if (val)
575 return -EINVAL;
576
577 mutex_lock(&data->mutex);
578 /* Refer to comments above for the suspend mode ops */
579 ret = bmg160_set_power_state(data, true);
580 if (ret < 0) {
581 mutex_unlock(&data->mutex);
582 return ret;
583 }
584 ret = bmg160_set_scale(data, val2);
585 if (ret < 0) {
586 bmg160_set_power_state(data, false);
587 mutex_unlock(&data->mutex);
588 return ret;
589 }
590 ret = bmg160_set_power_state(data, false);
591 mutex_unlock(&data->mutex);
592 return ret;
593 default:
594 return -EINVAL;
595 }
596
597 return -EINVAL;
598 }
599
600 static int bmg160_read_event(struct iio_dev *indio_dev,
601 const struct iio_chan_spec *chan,
602 enum iio_event_type type,
603 enum iio_event_direction dir,
604 enum iio_event_info info,
605 int *val, int *val2)
606 {
607 struct bmg160_data *data = iio_priv(indio_dev);
608
609 *val2 = 0;
610 switch (info) {
611 case IIO_EV_INFO_VALUE:
612 *val = data->slope_thres & BMG160_SLOPE_THRES_MASK;
613 break;
614 default:
615 return -EINVAL;
616 }
617
618 return IIO_VAL_INT;
619 }
620
621 static int bmg160_write_event(struct iio_dev *indio_dev,
622 const struct iio_chan_spec *chan,
623 enum iio_event_type type,
624 enum iio_event_direction dir,
625 enum iio_event_info info,
626 int val, int val2)
627 {
628 struct bmg160_data *data = iio_priv(indio_dev);
629
630 switch (info) {
631 case IIO_EV_INFO_VALUE:
632 if (data->ev_enable_state)
633 return -EBUSY;
634 data->slope_thres &= ~BMG160_SLOPE_THRES_MASK;
635 data->slope_thres |= (val & BMG160_SLOPE_THRES_MASK);
636 break;
637 default:
638 return -EINVAL;
639 }
640
641 return 0;
642 }
643
644 static int bmg160_read_event_config(struct iio_dev *indio_dev,
645 const struct iio_chan_spec *chan,
646 enum iio_event_type type,
647 enum iio_event_direction dir)
648 {
649
650 struct bmg160_data *data = iio_priv(indio_dev);
651
652 return data->ev_enable_state;
653 }
654
655 static int bmg160_write_event_config(struct iio_dev *indio_dev,
656 const struct iio_chan_spec *chan,
657 enum iio_event_type type,
658 enum iio_event_direction dir,
659 int state)
660 {
661 struct bmg160_data *data = iio_priv(indio_dev);
662 int ret;
663
664 if (state && data->ev_enable_state)
665 return 0;
666
667 mutex_lock(&data->mutex);
668
669 if (!state && data->motion_trigger_on) {
670 data->ev_enable_state = 0;
671 mutex_unlock(&data->mutex);
672 return 0;
673 }
674 /*
675 * We will expect the enable and disable to do operation in
676 * in reverse order. This will happen here anyway as our
677 * resume operation uses sync mode runtime pm calls, the
678 * suspend operation will be delayed by autosuspend delay
679 * So the disable operation will still happen in reverse of
680 * enable operation. When runtime pm is disabled the mode
681 * is always on so sequence doesn't matter
682 */
683 ret = bmg160_set_power_state(data, state);
684 if (ret < 0) {
685 mutex_unlock(&data->mutex);
686 return ret;
687 }
688
689 ret = bmg160_setup_any_motion_interrupt(data, state);
690 if (ret < 0) {
691 bmg160_set_power_state(data, false);
692 mutex_unlock(&data->mutex);
693 return ret;
694 }
695
696 data->ev_enable_state = state;
697 mutex_unlock(&data->mutex);
698
699 return 0;
700 }
701
702 static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("100 200 400 1000 2000");
703
704 static IIO_CONST_ATTR(in_anglvel_scale_available,
705 "0.001065 0.000532 0.000266 0.000133 0.000066");
706
707 static struct attribute *bmg160_attributes[] = {
708 &iio_const_attr_sampling_frequency_available.dev_attr.attr,
709 &iio_const_attr_in_anglvel_scale_available.dev_attr.attr,
710 NULL,
711 };
712
713 static const struct attribute_group bmg160_attrs_group = {
714 .attrs = bmg160_attributes,
715 };
716
717 static const struct iio_event_spec bmg160_event = {
718 .type = IIO_EV_TYPE_ROC,
719 .dir = IIO_EV_DIR_EITHER,
720 .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
721 BIT(IIO_EV_INFO_ENABLE)
722 };
723
724 #define BMG160_CHANNEL(_axis) { \
725 .type = IIO_ANGL_VEL, \
726 .modified = 1, \
727 .channel2 = IIO_MOD_##_axis, \
728 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
729 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
730 BIT(IIO_CHAN_INFO_SAMP_FREQ), \
731 .scan_index = AXIS_##_axis, \
732 .scan_type = { \
733 .sign = 's', \
734 .realbits = 16, \
735 .storagebits = 16, \
736 }, \
737 .event_spec = &bmg160_event, \
738 .num_event_specs = 1 \
739 }
740
741 static const struct iio_chan_spec bmg160_channels[] = {
742 {
743 .type = IIO_TEMP,
744 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
745 BIT(IIO_CHAN_INFO_SCALE) |
746 BIT(IIO_CHAN_INFO_OFFSET),
747 .scan_index = -1,
748 },
749 BMG160_CHANNEL(X),
750 BMG160_CHANNEL(Y),
751 BMG160_CHANNEL(Z),
752 IIO_CHAN_SOFT_TIMESTAMP(3),
753 };
754
755 static const struct iio_info bmg160_info = {
756 .attrs = &bmg160_attrs_group,
757 .read_raw = bmg160_read_raw,
758 .write_raw = bmg160_write_raw,
759 .read_event_value = bmg160_read_event,
760 .write_event_value = bmg160_write_event,
761 .write_event_config = bmg160_write_event_config,
762 .read_event_config = bmg160_read_event_config,
763 .driver_module = THIS_MODULE,
764 };
765
766 static irqreturn_t bmg160_trigger_handler(int irq, void *p)
767 {
768 struct iio_poll_func *pf = p;
769 struct iio_dev *indio_dev = pf->indio_dev;
770 struct bmg160_data *data = iio_priv(indio_dev);
771 int bit, ret, i = 0;
772 unsigned int val;
773
774 mutex_lock(&data->mutex);
775 for_each_set_bit(bit, indio_dev->active_scan_mask,
776 indio_dev->masklength) {
777 ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(bit),
778 &val, 2);
779 if (ret < 0) {
780 mutex_unlock(&data->mutex);
781 goto err;
782 }
783 data->buffer[i++] = ret;
784 }
785 mutex_unlock(&data->mutex);
786
787 iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
788 pf->timestamp);
789 err:
790 iio_trigger_notify_done(indio_dev->trig);
791
792 return IRQ_HANDLED;
793 }
794
795 static int bmg160_trig_try_reen(struct iio_trigger *trig)
796 {
797 struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
798 struct bmg160_data *data = iio_priv(indio_dev);
799 int ret;
800
801 /* new data interrupts don't need ack */
802 if (data->dready_trigger_on)
803 return 0;
804
805 /* Set latched mode interrupt and clear any latched interrupt */
806 ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
807 BMG160_INT_MODE_LATCH_INT |
808 BMG160_INT_MODE_LATCH_RESET);
809 if (ret < 0) {
810 dev_err(data->dev, "Error writing reg_rst_latch\n");
811 return ret;
812 }
813
814 return 0;
815 }
816
817 static int bmg160_data_rdy_trigger_set_state(struct iio_trigger *trig,
818 bool state)
819 {
820 struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
821 struct bmg160_data *data = iio_priv(indio_dev);
822 int ret;
823
824 mutex_lock(&data->mutex);
825
826 if (!state && data->ev_enable_state && data->motion_trigger_on) {
827 data->motion_trigger_on = false;
828 mutex_unlock(&data->mutex);
829 return 0;
830 }
831
832 /*
833 * Refer to comment in bmg160_write_event_config for
834 * enable/disable operation order
835 */
836 ret = bmg160_set_power_state(data, state);
837 if (ret < 0) {
838 mutex_unlock(&data->mutex);
839 return ret;
840 }
841 if (data->motion_trig == trig)
842 ret = bmg160_setup_any_motion_interrupt(data, state);
843 else
844 ret = bmg160_setup_new_data_interrupt(data, state);
845 if (ret < 0) {
846 bmg160_set_power_state(data, false);
847 mutex_unlock(&data->mutex);
848 return ret;
849 }
850 if (data->motion_trig == trig)
851 data->motion_trigger_on = state;
852 else
853 data->dready_trigger_on = state;
854
855 mutex_unlock(&data->mutex);
856
857 return 0;
858 }
859
860 static const struct iio_trigger_ops bmg160_trigger_ops = {
861 .set_trigger_state = bmg160_data_rdy_trigger_set_state,
862 .try_reenable = bmg160_trig_try_reen,
863 .owner = THIS_MODULE,
864 };
865
866 static irqreturn_t bmg160_event_handler(int irq, void *private)
867 {
868 struct iio_dev *indio_dev = private;
869 struct bmg160_data *data = iio_priv(indio_dev);
870 int ret;
871 int dir;
872 unsigned int val;
873
874 ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2, &val);
875 if (ret < 0) {
876 dev_err(data->dev, "Error reading reg_int_status2\n");
877 goto ack_intr_status;
878 }
879
880 if (val & 0x08)
881 dir = IIO_EV_DIR_RISING;
882 else
883 dir = IIO_EV_DIR_FALLING;
884
885 if (val & BMG160_ANY_MOTION_BIT_X)
886 iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
887 0,
888 IIO_MOD_X,
889 IIO_EV_TYPE_ROC,
890 dir),
891 iio_get_time_ns());
892 if (val & BMG160_ANY_MOTION_BIT_Y)
893 iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
894 0,
895 IIO_MOD_Y,
896 IIO_EV_TYPE_ROC,
897 dir),
898 iio_get_time_ns());
899 if (val & BMG160_ANY_MOTION_BIT_Z)
900 iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
901 0,
902 IIO_MOD_Z,
903 IIO_EV_TYPE_ROC,
904 dir),
905 iio_get_time_ns());
906
907 ack_intr_status:
908 if (!data->dready_trigger_on) {
909 ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
910 BMG160_INT_MODE_LATCH_INT |
911 BMG160_INT_MODE_LATCH_RESET);
912 if (ret < 0)
913 dev_err(data->dev,
914 "Error writing reg_rst_latch\n");
915 }
916
917 return IRQ_HANDLED;
918 }
919
920 static irqreturn_t bmg160_data_rdy_trig_poll(int irq, void *private)
921 {
922 struct iio_dev *indio_dev = private;
923 struct bmg160_data *data = iio_priv(indio_dev);
924
925 if (data->dready_trigger_on)
926 iio_trigger_poll(data->dready_trig);
927 else if (data->motion_trigger_on)
928 iio_trigger_poll(data->motion_trig);
929
930 if (data->ev_enable_state)
931 return IRQ_WAKE_THREAD;
932 else
933 return IRQ_HANDLED;
934
935 }
936
937 static int bmg160_buffer_preenable(struct iio_dev *indio_dev)
938 {
939 struct bmg160_data *data = iio_priv(indio_dev);
940
941 return bmg160_set_power_state(data, true);
942 }
943
944 static int bmg160_buffer_postdisable(struct iio_dev *indio_dev)
945 {
946 struct bmg160_data *data = iio_priv(indio_dev);
947
948 return bmg160_set_power_state(data, false);
949 }
950
951 static const struct iio_buffer_setup_ops bmg160_buffer_setup_ops = {
952 .preenable = bmg160_buffer_preenable,
953 .postenable = iio_triggered_buffer_postenable,
954 .predisable = iio_triggered_buffer_predisable,
955 .postdisable = bmg160_buffer_postdisable,
956 };
957
958 static int bmg160_gpio_probe(struct bmg160_data *data)
959
960 {
961 struct device *dev;
962 struct gpio_desc *gpio;
963
964 dev = data->dev;
965
966 /* data ready gpio interrupt pin */
967 gpio = devm_gpiod_get_index(dev, BMG160_GPIO_NAME, 0, GPIOD_IN);
968 if (IS_ERR(gpio)) {
969 dev_err(dev, "acpi gpio get index failed\n");
970 return PTR_ERR(gpio);
971 }
972
973 data->irq = gpiod_to_irq(gpio);
974
975 dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio),
976 data->irq);
977
978 return 0;
979 }
980
981 static const char *bmg160_match_acpi_device(struct device *dev)
982 {
983 const struct acpi_device_id *id;
984
985 id = acpi_match_device(dev->driver->acpi_match_table, dev);
986 if (!id)
987 return NULL;
988
989 return dev_name(dev);
990 }
991
992 int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
993 const char *name)
994 {
995 struct bmg160_data *data;
996 struct iio_dev *indio_dev;
997 int ret;
998
999 indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
1000 if (!indio_dev)
1001 return -ENOMEM;
1002
1003 data = iio_priv(indio_dev);
1004 dev_set_drvdata(dev, indio_dev);
1005 data->dev = dev;
1006 data->irq = irq;
1007 data->regmap = regmap;
1008
1009 ret = bmg160_chip_init(data);
1010 if (ret < 0)
1011 return ret;
1012
1013 mutex_init(&data->mutex);
1014
1015 if (ACPI_HANDLE(dev))
1016 name = bmg160_match_acpi_device(dev);
1017
1018 indio_dev->dev.parent = dev;
1019 indio_dev->channels = bmg160_channels;
1020 indio_dev->num_channels = ARRAY_SIZE(bmg160_channels);
1021 indio_dev->name = name;
1022 indio_dev->modes = INDIO_DIRECT_MODE;
1023 indio_dev->info = &bmg160_info;
1024
1025 if (data->irq <= 0)
1026 bmg160_gpio_probe(data);
1027
1028 if (data->irq > 0) {
1029 ret = devm_request_threaded_irq(dev,
1030 data->irq,
1031 bmg160_data_rdy_trig_poll,
1032 bmg160_event_handler,
1033 IRQF_TRIGGER_RISING,
1034 BMG160_IRQ_NAME,
1035 indio_dev);
1036 if (ret)
1037 return ret;
1038
1039 data->dready_trig = devm_iio_trigger_alloc(dev,
1040 "%s-dev%d",
1041 indio_dev->name,
1042 indio_dev->id);
1043 if (!data->dready_trig)
1044 return -ENOMEM;
1045
1046 data->motion_trig = devm_iio_trigger_alloc(dev,
1047 "%s-any-motion-dev%d",
1048 indio_dev->name,
1049 indio_dev->id);
1050 if (!data->motion_trig)
1051 return -ENOMEM;
1052
1053 data->dready_trig->dev.parent = dev;
1054 data->dready_trig->ops = &bmg160_trigger_ops;
1055 iio_trigger_set_drvdata(data->dready_trig, indio_dev);
1056 ret = iio_trigger_register(data->dready_trig);
1057 if (ret)
1058 return ret;
1059
1060 data->motion_trig->dev.parent = dev;
1061 data->motion_trig->ops = &bmg160_trigger_ops;
1062 iio_trigger_set_drvdata(data->motion_trig, indio_dev);
1063 ret = iio_trigger_register(data->motion_trig);
1064 if (ret) {
1065 data->motion_trig = NULL;
1066 goto err_trigger_unregister;
1067 }
1068 }
1069
1070 ret = iio_triggered_buffer_setup(indio_dev,
1071 iio_pollfunc_store_time,
1072 bmg160_trigger_handler,
1073 &bmg160_buffer_setup_ops);
1074 if (ret < 0) {
1075 dev_err(dev,
1076 "iio triggered buffer setup failed\n");
1077 goto err_trigger_unregister;
1078 }
1079
1080 ret = pm_runtime_set_active(dev);
1081 if (ret)
1082 goto err_buffer_cleanup;
1083
1084 pm_runtime_enable(dev);
1085 pm_runtime_set_autosuspend_delay(dev,
1086 BMG160_AUTO_SUSPEND_DELAY_MS);
1087 pm_runtime_use_autosuspend(dev);
1088
1089 ret = iio_device_register(indio_dev);
1090 if (ret < 0) {
1091 dev_err(dev, "unable to register iio device\n");
1092 goto err_buffer_cleanup;
1093 }
1094
1095 return 0;
1096
1097 err_buffer_cleanup:
1098 iio_triggered_buffer_cleanup(indio_dev);
1099 err_trigger_unregister:
1100 if (data->dready_trig)
1101 iio_trigger_unregister(data->dready_trig);
1102 if (data->motion_trig)
1103 iio_trigger_unregister(data->motion_trig);
1104
1105 return ret;
1106 }
1107 EXPORT_SYMBOL_GPL(bmg160_core_probe);
1108
1109 void bmg160_core_remove(struct device *dev)
1110 {
1111 struct iio_dev *indio_dev = dev_get_drvdata(dev);
1112 struct bmg160_data *data = iio_priv(indio_dev);
1113
1114 iio_device_unregister(indio_dev);
1115
1116 pm_runtime_disable(dev);
1117 pm_runtime_set_suspended(dev);
1118 pm_runtime_put_noidle(dev);
1119
1120 iio_triggered_buffer_cleanup(indio_dev);
1121
1122 if (data->dready_trig) {
1123 iio_trigger_unregister(data->dready_trig);
1124 iio_trigger_unregister(data->motion_trig);
1125 }
1126
1127 mutex_lock(&data->mutex);
1128 bmg160_set_mode(data, BMG160_MODE_DEEP_SUSPEND);
1129 mutex_unlock(&data->mutex);
1130 }
1131 EXPORT_SYMBOL_GPL(bmg160_core_remove);
1132
1133 #ifdef CONFIG_PM_SLEEP
1134 static int bmg160_suspend(struct device *dev)
1135 {
1136 struct iio_dev *indio_dev = dev_get_drvdata(dev);
1137 struct bmg160_data *data = iio_priv(indio_dev);
1138
1139 mutex_lock(&data->mutex);
1140 bmg160_set_mode(data, BMG160_MODE_SUSPEND);
1141 mutex_unlock(&data->mutex);
1142
1143 return 0;
1144 }
1145
1146 static int bmg160_resume(struct device *dev)
1147 {
1148 struct iio_dev *indio_dev = dev_get_drvdata(dev);
1149 struct bmg160_data *data = iio_priv(indio_dev);
1150
1151 mutex_lock(&data->mutex);
1152 if (data->dready_trigger_on || data->motion_trigger_on ||
1153 data->ev_enable_state)
1154 bmg160_set_mode(data, BMG160_MODE_NORMAL);
1155 mutex_unlock(&data->mutex);
1156
1157 return 0;
1158 }
1159 #endif
1160
1161 #ifdef CONFIG_PM
1162 static int bmg160_runtime_suspend(struct device *dev)
1163 {
1164 struct iio_dev *indio_dev = dev_get_drvdata(dev);
1165 struct bmg160_data *data = iio_priv(indio_dev);
1166 int ret;
1167
1168 ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND);
1169 if (ret < 0) {
1170 dev_err(data->dev, "set mode failed\n");
1171 return -EAGAIN;
1172 }
1173
1174 return 0;
1175 }
1176
1177 static int bmg160_runtime_resume(struct device *dev)
1178 {
1179 struct iio_dev *indio_dev = dev_get_drvdata(dev);
1180 struct bmg160_data *data = iio_priv(indio_dev);
1181 int ret;
1182
1183 ret = bmg160_set_mode(data, BMG160_MODE_NORMAL);
1184 if (ret < 0)
1185 return ret;
1186
1187 msleep_interruptible(BMG160_MAX_STARTUP_TIME_MS);
1188
1189 return 0;
1190 }
1191 #endif
1192
1193 const struct dev_pm_ops bmg160_pm_ops = {
1194 SET_SYSTEM_SLEEP_PM_OPS(bmg160_suspend, bmg160_resume)
1195 SET_RUNTIME_PM_OPS(bmg160_runtime_suspend,
1196 bmg160_runtime_resume, NULL)
1197 };
1198 EXPORT_SYMBOL_GPL(bmg160_pm_ops);
1199
1200 MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
1201 MODULE_LICENSE("GPL v2");
1202 MODULE_DESCRIPTION("BMG160 Gyro driver");
Linux kernel - Deliverables
This page took 0.072803 seconds and 6 git commands to generate.