drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config TOUCHSCREEN_88PM860X
  15         tristate "Marvell 88PM860x touchscreen"
  16         depends on MFD_88PM860X
  17         help
  18           Say Y here if you have a 88PM860x PMIC and want to enable
  19           support for the built-in touchscreen.
  20
  21           If unsure, say N.
  22
  23           To compile this driver as a module, choose M here: the
  24           module will be called 88pm860x-ts.
  25
  26 config TOUCHSCREEN_ADS7846
  27         tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
  28         depends on SPI_MASTER
  29         depends on HWMON = n || HWMON
  30         help
  31           Say Y here if you have a touchscreen interface using the
  32           ADS7846/TSC2046 or ADS7843 controller, and your board-specific
  33           setup code includes that in its table of SPI devices.
  34
  35           If HWMON is selected, and the driver is told the reference voltage
  36           on your board, you will also get hwmon interfaces for the voltage
  37           (and on ads7846/tsc2046, temperature) sensors of this chip.
  38
  39           If unsure, say N (but it's safe to say "Y").
  40
  41           To compile this driver as a module, choose M here: the
  42           module will be called ads7846.
  43
  44 config TOUCHSCREEN_AD7877
  45         tristate "AD7877 based touchscreens"
  46         depends on SPI_MASTER
  47         help
  48           Say Y here if you have a touchscreen interface using the
  49           AD7877 controller, and your board-specific initialization
  50           code includes that in its table of SPI devices.
  51
  52           If unsure, say N (but it's safe to say "Y").
  53
  54           To compile this driver as a module, choose M here: the
  55           module will be called ad7877.
  56
  57 config TOUCHSCREEN_AD7879_I2C
  58         tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
  59         depends on I2C
  60         select TOUCHSCREEN_AD7879
  61         help
  62           Say Y here if you have a touchscreen interface using the
  63           AD7879-1/AD7889-1 controller, and your board-specific
  64           initialization code includes that in its table of I2C devices.
  65
  66           If unsure, say N (but it's safe to say "Y").
  67
  68           To compile this driver as a module, choose M here: the
  69           module will be called ad7879.
  70
  71 config TOUCHSCREEN_AD7879_SPI
  72         tristate "AD7879 based touchscreens: AD7879 SPI Interface"
  73         depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
  74         select TOUCHSCREEN_AD7879
  75         help
  76           Say Y here if you have a touchscreen interface using the
  77           AD7879/AD7889 controller, and your board-specific initialization
  78           code includes that in its table of SPI devices.
  79
  80           If unsure, say N (but it's safe to say "Y").
  81
  82           To compile this driver as a module, choose M here: the
  83           module will be called ad7879.
  84
  85 config TOUCHSCREEN_AD7879
  86         tristate
  87         default n
  88
  89 config TOUCHSCREEN_BITSY
  90         tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
  91         depends on SA1100_BITSY
  92         select SERIO
  93         help
  94           Say Y here if you have the h3600 (Bitsy) touchscreen.
  95
  96           If unsure, say N.
  97
  98           To compile this driver as a module, choose M here: the
  99           module will be called h3600_ts_input.
 100
 101 config TOUCHSCREEN_CORGI
 102         tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
 103         depends on PXA_SHARPSL
 104         select CORGI_SSP_DEPRECATED
 105         help
 106           Say Y here to enable the driver for the touchscreen on the
 107           Sharp SL-C7xx and SL-Cxx00 series of PDAs.
 108
 109           If unsure, say N.
 110
 111           To compile this driver as a module, choose M here: the
 112           module will be called corgi_ts.
 113
 114           NOTE: this driver is deprecated, try enable SPI and generic
 115           ADS7846-based touchscreen driver.
 116
 117 config TOUCHSCREEN_DA9034
 118         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 119         depends on PMIC_DA903X
 120         default y
 121         help
 122           Say Y here to enable the support for the touchscreen found
 123           on Dialog Semiconductor DA9034 PMIC.
 124
 125 config TOUCHSCREEN_DYNAPRO
 126         tristate "Dynapro serial touchscreen"
 127         select SERIO
 128         help
 129           Say Y here if you have a Dynapro serial touchscreen connected to
 130           your system.
 131
 132           If unsure, say N.
 133
 134           To compile this driver as a module, choose M here: the
 135           module will be called dynapro.
 136
 137 config TOUCHSCREEN_EETI
 138         tristate "EETI touchscreen panel support"
 139         depends on I2C
 140         help
 141           Say Y here to enable support for I2C connected EETI touch panels.
 142
 143           To compile this driver as a module, choose M here: the
 144           module will be called eeti_ts.
 145
 146 config TOUCHSCREEN_FUJITSU
 147         tristate "Fujitsu serial touchscreen"
 148         select SERIO
 149         help
 150           Say Y here if you have the Fujitsu touchscreen (such as one
 151           installed in Lifebook P series laptop) connected to your
 152           system.
 153
 154           If unsure, say N.
 155
 156           To compile this driver as a module, choose M here: the
 157           module will be called fujitsu-ts.
 158
 159 config TOUCHSCREEN_S3C2410
 160         tristate "Samsung S3C2410 touchscreen input driver"
 161         depends on ARCH_S3C2410
 162         select S3C24XX_ADC
 163         help
 164           Say Y here if you have the s3c2410 touchscreen.
 165
 166           If unsure, say N.
 167
 168           To compile this driver as a module, choose M here: the
 169           module will be called s3c2410_ts.
 170
 171 config TOUCHSCREEN_GUNZE
 172         tristate "Gunze AHL-51S touchscreen"
 173         select SERIO
 174         help
 175           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 176           your system.
 177
 178           If unsure, say N.
 179
 180           To compile this driver as a module, choose M here: the
 181           module will be called gunze.
 182
 183 config TOUCHSCREEN_ELO
 184         tristate "Elo serial touchscreens"
 185         select SERIO
 186         help
 187           Say Y here if you have an Elo serial touchscreen connected to
 188           your system.
 189
 190           If unsure, say N.
 191
 192           To compile this driver as a module, choose M here: the
 193           module will be called elo.
 194
 195 config TOUCHSCREEN_WACOM_W8001
 196         tristate "Wacom W8001 penabled serial touchscreen"
 197         select SERIO
 198         help
 199           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 200           connected to your system.
 201
 202           If unsure, say N.
 203
 204           To compile this driver as a module, choose M here: the
 205           module will be called wacom_w8001.
 206
 207 config TOUCHSCREEN_MCS5000
 208         tristate "MELFAS MCS-5000 touchscreen"
 209         depends on I2C
 210         help
 211           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 212           chip in your system.
 213
 214           If unsure, say N.
 215
 216           To compile this driver as a module, choose M here: the
 217           module will be called mcs5000_ts.
 218
 219 config TOUCHSCREEN_MTOUCH
 220         tristate "MicroTouch serial touchscreens"
 221         select SERIO
 222         help
 223           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 224           your system.
 225
 226           If unsure, say N.
 227
 228           To compile this driver as a module, choose M here: the
 229           module will be called mtouch.
 230
 231 config TOUCHSCREEN_INEXIO
 232         tristate "iNexio serial touchscreens"
 233         select SERIO
 234         help
 235           Say Y here if you have an iNexio serial touchscreen connected to
 236           your system.
 237
 238           If unsure, say N.
 239
 240           To compile this driver as a module, choose M here: the
 241           module will be called inexio.
 242
 243 config TOUCHSCREEN_MK712
 244         tristate "ICS MicroClock MK712 touchscreen"
 245         help
 246           Say Y here if you have the ICS MicroClock MK712 touchscreen
 247           controller chip in your system.
 248
 249           If unsure, say N.
 250
 251           To compile this driver as a module, choose M here: the
 252           module will be called mk712.
 253
 254 config TOUCHSCREEN_HP600
 255         tristate "HP Jornada 6xx touchscreen"
 256         depends on SH_HP6XX && SH_ADC
 257         help
 258           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 259           support the built-in touchscreen.
 260
 261           To compile this driver as a module, choose M here: the
 262           module will be called hp680_ts_input.
 263
 264 config TOUCHSCREEN_HP7XX
 265         tristate "HP Jornada 7xx touchscreen"
 266         depends on SA1100_JORNADA720_SSP
 267         help
 268           Say Y here if you have a HP Jornada 710/720/728 and want
 269           to support the built-in touchscreen.
 270
 271           To compile this driver as a module, choose M here: the
 272           module will be called jornada720_ts.
 273
 274 config TOUCHSCREEN_HTCPEN
 275         tristate "HTC Shift X9500 touchscreen"
 276         depends on ISA
 277         help
 278           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 279           Clio / Shangrila and want to support the built-in touchscreen.
 280
 281           If unsure, say N.
 282
 283           To compile this driver as a module, choose M here: the
 284           module will be called htcpen.
 285
 286 config TOUCHSCREEN_PENMOUNT
 287         tristate "Penmount serial touchscreen"
 288         select SERIO
 289         help
 290           Say Y here if you have a Penmount serial touchscreen connected to
 291           your system.
 292
 293           If unsure, say N.
 294
 295           To compile this driver as a module, choose M here: the
 296           module will be called penmount.
 297
 298 config TOUCHSCREEN_MIGOR
 299         tristate "Renesas MIGO-R touchscreen"
 300         depends on SH_MIGOR && I2C
 301         help
 302           Say Y here to enable MIGO-R touchscreen support.
 303
 304           If unsure, say N.
 305
 306           To compile this driver as a module, choose M here: the
 307           module will be called migor_ts.
 308
 309 config TOUCHSCREEN_TOUCHRIGHT
 310         tristate "Touchright serial touchscreen"
 311         select SERIO
 312         help
 313           Say Y here if you have a Touchright serial touchscreen connected to
 314           your system.
 315
 316           If unsure, say N.
 317
 318           To compile this driver as a module, choose M here: the
 319           module will be called touchright.
 320
 321 config TOUCHSCREEN_TOUCHWIN
 322         tristate "Touchwin serial touchscreen"
 323         select SERIO
 324         help
 325           Say Y here if you have a Touchwin serial touchscreen connected to
 326           your system.
 327
 328           If unsure, say N.
 329
 330           To compile this driver as a module, choose M here: the
 331           module will be called touchwin.
 332
 333 config TOUCHSCREEN_ATMEL_TSADCC
 334         tristate "Atmel Touchscreen Interface"
 335         depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 336         help
 337           Say Y here if you have a 4-wire touchscreen connected to the
 338           ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
 339
 340           If unsure, say N.
 341
 342           To compile this driver as a module, choose M here: the
 343           module will be called atmel_tsadcc.
 344
 345 config TOUCHSCREEN_UCB1400
 346         tristate "Philips UCB1400 touchscreen"
 347         depends on AC97_BUS
 348         depends on UCB1400_CORE
 349         help
 350           This enables support for the Philips UCB1400 touchscreen interface.
 351           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 352           will be initialized only after the ALSA subsystem has been
 353           brought up and the UCB1400 detected.  You therefore have to
 354           configure ALSA support as well (either built-in or modular,
 355           independently of whether this driver is itself built-in or
 356           modular) for this driver to work.
 357
 358           To compile this driver as a module, choose M here: the
 359           module will be called ucb1400_ts.
 360
 361 config TOUCHSCREEN_WM97XX
 362         tristate "Support for WM97xx AC97 touchscreen controllers"
 363         depends on AC97_BUS
 364         help
 365           Say Y here if you have a Wolfson Microelectronics WM97xx
 366           touchscreen connected to your system. Note that this option
 367           only enables core driver, you will also need to select
 368           support for appropriate chip below.
 369
 370           If unsure, say N.
 371
 372           To compile this driver as a module, choose M here: the
 373           module will be called wm97xx-ts.
 374
 375 config TOUCHSCREEN_WM9705
 376         bool "WM9705 Touchscreen interface support"
 377         depends on TOUCHSCREEN_WM97XX
 378         default y
 379         help
 380           Say Y here to enable support for the Wolfson Microelectronics
 381           WM9705 touchscreen controller.
 382
 383 config TOUCHSCREEN_WM9712
 384         bool "WM9712 Touchscreen interface support"
 385         depends on TOUCHSCREEN_WM97XX
 386         default y
 387         help
 388           Say Y here to enable support for the Wolfson Microelectronics
 389           WM9712 touchscreen controller.
 390
 391 config TOUCHSCREEN_WM9713
 392         bool "WM9713 Touchscreen interface support"
 393         depends on TOUCHSCREEN_WM97XX
 394         default y
 395         help
 396           Say Y here to enable support for the Wolfson Microelectronics
 397           WM9713 touchscreen controller.
 398
 399 config TOUCHSCREEN_WM97XX_ATMEL
 400         tristate "WM97xx Atmel accelerated touch"
 401         depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
 402         help
 403           Say Y here for support for streaming mode with WM97xx touchscreens
 404           on Atmel AT91 or AVR32 systems with an AC97C module.
 405
 406           Be aware that this will use channel B in the controller for
 407           streaming data, this must not conflict with other AC97C drivers.
 408
 409           If unsure, say N.
 410
 411           To compile this driver as a module, choose M here: the module will
 412           be called atmel-wm97xx.
 413
 414 config TOUCHSCREEN_WM97XX_MAINSTONE
 415         tristate "WM97xx Mainstone/Palm accelerated touch"
 416         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 417         help
 418           Say Y here for support for streaming mode with WM97xx touchscreens
 419           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 420
 421           If unsure, say N.
 422
 423           To compile this driver as a module, choose M here: the
 424           module will be called mainstone-wm97xx.
 425
 426 config TOUCHSCREEN_WM97XX_ZYLONITE
 427         tristate "Zylonite accelerated touch"
 428         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 429         select TOUCHSCREEN_WM9713
 430         help
 431           Say Y here for support for streaming mode with the touchscreen
 432           on Zylonite systems.
 433
 434           If unsure, say N.
 435
 436           To compile this driver as a module, choose M here: the
 437           module will be called zylonite-wm97xx.
 438
 439 config TOUCHSCREEN_USB_COMPOSITE
 440         tristate "USB Touchscreen Driver"
 441         depends on USB_ARCH_HAS_HCD
 442         select USB
 443         help
 444           USB Touchscreen driver for:
 445           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 446           - PanJit TouchSet USB
 447           - 3M MicroTouch USB (EX II series)
 448           - ITM
 449           - some other eTurboTouch
 450           - Gunze AHL61
 451           - DMC TSC-10/25
 452           - IRTOUCHSYSTEMS/UNITOP
 453           - IdealTEK URTC1000
 454           - GoTop Super_Q2/GogoPen/PenPower tablets
 455           - JASTEC USB Touch Controller/DigiTech DTR-02U
 456           - Zytronic controllers
 457
 458           Have a look at <http://linux.chapter7.ch/touchkit/> for
 459           a usage description and the required user-space stuff.
 460
 461           To compile this driver as a module, choose M here: the
 462           module will be called usbtouchscreen.
 463
 464 config TOUCHSCREEN_MC13783
 465         tristate "Freescale MC13783 touchscreen input driver"
 466         depends on MFD_MC13783
 467         help
 468           Say Y here if you have an Freescale MC13783 PMIC on your
 469           board and want to use its touchscreen
 470
 471           If unsure, say N.
 472
 473           To compile this driver as a module, choose M here: the
 474           module will be called mc13783_ts.
 475
 476 config TOUCHSCREEN_USB_EGALAX
 477         default y
 478         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
 479         depends on TOUCHSCREEN_USB_COMPOSITE
 480
 481 config TOUCHSCREEN_USB_PANJIT
 482         default y
 483         bool "PanJit device support" if EMBEDDED
 484         depends on TOUCHSCREEN_USB_COMPOSITE
 485
 486 config TOUCHSCREEN_USB_3M
 487         default y
 488         bool "3M/Microtouch EX II series device support" if EMBEDDED
 489         depends on TOUCHSCREEN_USB_COMPOSITE
 490
 491 config TOUCHSCREEN_USB_ITM
 492         default y
 493         bool "ITM device support" if EMBEDDED
 494         depends on TOUCHSCREEN_USB_COMPOSITE
 495
 496 config TOUCHSCREEN_USB_ETURBO
 497         default y
 498         bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
 499         depends on TOUCHSCREEN_USB_COMPOSITE
 500
 501 config TOUCHSCREEN_USB_GUNZE
 502         default y
 503         bool "Gunze AHL61 device support" if EMBEDDED
 504         depends on TOUCHSCREEN_USB_COMPOSITE
 505
 506 config TOUCHSCREEN_USB_DMC_TSC10
 507         default y
 508         bool "DMC TSC-10/25 device support" if EMBEDDED
 509         depends on TOUCHSCREEN_USB_COMPOSITE
 510
 511 config TOUCHSCREEN_USB_IRTOUCH
 512         default y
 513         bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
 514         depends on TOUCHSCREEN_USB_COMPOSITE
 515
 516 config TOUCHSCREEN_USB_IDEALTEK
 517         default y
 518         bool "IdealTEK URTC1000 device support" if EMBEDDED
 519         depends on TOUCHSCREEN_USB_COMPOSITE
 520
 521 config TOUCHSCREEN_USB_GENERAL_TOUCH
 522         default y
 523         bool "GeneralTouch Touchscreen device support" if EMBEDDED
 524         depends on TOUCHSCREEN_USB_COMPOSITE
 525
 526 config TOUCHSCREEN_USB_GOTOP
 527         default y
 528         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
 529         depends on TOUCHSCREEN_USB_COMPOSITE
 530
 531 config TOUCHSCREEN_USB_JASTEC
 532         default y
 533         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED
 534         depends on TOUCHSCREEN_USB_COMPOSITE
 535
 536 config TOUCHSCREEN_USB_E2I
 537         default y
 538         bool "e2i Touchscreen controller (e.g. from Mimo 740)"
 539         depends on TOUCHSCREEN_USB_COMPOSITE
 540
 541 config TOUCHSCREEN_USB_ZYTRONIC
 542         default y
 543         bool "Zytronic controller" if EMBEDDED
 544         depends on TOUCHSCREEN_USB_COMPOSITE
 545
 546 config TOUCHSCREEN_USB_ETT_TC5UH
 547         default y
 548         bool "ET&T TC5UH touchscreen controler support" if EMBEDDED
 549         depends on TOUCHSCREEN_USB_COMPOSITE
 550
 551 config TOUCHSCREEN_USB_NEXIO
 552         default y
 553         bool "NEXIO/iNexio device support" if EMBEDDED
 554         depends on TOUCHSCREEN_USB_COMPOSITE
 555
 556 config TOUCHSCREEN_TOUCHIT213
 557         tristate "Sahara TouchIT-213 touchscreen"
 558         select SERIO
 559         help
 560           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 561
 562           If unsure, say N.
 563
 564           To compile this driver as a module, choose M here: the
 565           module will be called touchit213.
 566
 567 config TOUCHSCREEN_TSC2007
 568         tristate "TSC2007 based touchscreens"
 569         depends on I2C
 570         help
 571           Say Y here if you have a TSC2007 based touchscreen.
 572
 573           If unsure, say N.
 574
 575           To compile this driver as a module, choose M here: the
 576           module will be called tsc2007.
 577
 578 config TOUCHSCREEN_W90X900
 579         tristate "W90P910 touchscreen driver"
 580         depends on HAVE_CLK
 581         help
 582           Say Y here if you have a W90P910 based touchscreen.
 583
 584           To compile this driver as a module, choose M here: the
 585           module will be called w90p910_ts.
 586
 587 config TOUCHSCREEN_PCAP
 588         tristate "Motorola PCAP touchscreen"
 589         depends on EZX_PCAP
 590         help
 591           Say Y here if you have a Motorola EZX telephone and
 592           want to enable support for the built-in touchscreen.
 593
 594           To compile this driver as a module, choose M here: the
 595           module will be called pcap_ts.
 596 endif