drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config TOUCHSCREEN_ADS7846
  15         tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
  16         depends on SPI_MASTER
  17         depends on HWMON = n || HWMON
  18         help
  19           Say Y here if you have a touchscreen interface using the
  20           ADS7846/TSC2046 or ADS7843 controller, and your board-specific
  21           setup code includes that in its table of SPI devices.
  22
  23           If HWMON is selected, and the driver is told the reference voltage
  24           on your board, you will also get hwmon interfaces for the voltage
  25           (and on ads7846/tsc2046, temperature) sensors of this chip.
  26
  27           If unsure, say N (but it's safe to say "Y").
  28
  29           To compile this driver as a module, choose M here: the
  30           module will be called ads7846.
  31
  32 config TOUCHSCREEN_AD7877
  33         tristate "AD7877 based touchscreens"
  34         depends on SPI_MASTER
  35         help
  36           Say Y here if you have a touchscreen interface using the
  37           AD7877 controller, and your board-specific initialization
  38           code includes that in its table of SPI devices.
  39
  40           If unsure, say N (but it's safe to say "Y").
  41
  42           To compile this driver as a module, choose M here: the
  43           module will be called ad7877.
  44
  45 config TOUCHSCREEN_AD7879_I2C
  46         tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
  47         depends on I2C
  48         select TOUCHSCREEN_AD7879
  49         help
  50           Say Y here if you have a touchscreen interface using the
  51           AD7879-1 controller, and your board-specific initialization
  52           code includes that in its table of I2C devices.
  53
  54           If unsure, say N (but it's safe to say "Y").
  55
  56           To compile this driver as a module, choose M here: the
  57           module will be called ad7879.
  58
  59 config TOUCHSCREEN_AD7879_SPI
  60         tristate "AD7879 based touchscreens: AD7879 SPI Interface"
  61         depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
  62         select TOUCHSCREEN_AD7879
  63         help
  64           Say Y here if you have a touchscreen interface using the
  65           AD7879 controller, and your board-specific initialization
  66           code includes that in its table of SPI devices.
  67
  68           If unsure, say N (but it's safe to say "Y").
  69
  70           To compile this driver as a module, choose M here: the
  71           module will be called ad7879.
  72
  73 config TOUCHSCREEN_AD7879
  74         tristate
  75         default n
  76
  77 config TOUCHSCREEN_BITSY
  78         tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
  79         depends on SA1100_BITSY
  80         select SERIO
  81         help
  82           Say Y here if you have the h3600 (Bitsy) touchscreen.
  83
  84           If unsure, say N.
  85
  86           To compile this driver as a module, choose M here: the
  87           module will be called h3600_ts_input.
  88
  89 config TOUCHSCREEN_CORGI
  90         tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
  91         depends on PXA_SHARPSL
  92         select CORGI_SSP_DEPRECATED
  93         default y
  94         help
  95           Say Y here to enable the driver for the touchscreen on the
  96           Sharp SL-C7xx and SL-Cxx00 series of PDAs.
  97
  98           If unsure, say N.
  99
 100           To compile this driver as a module, choose M here: the
 101           module will be called corgi_ts.
 102
 103           NOTE: this driver is deprecated, try enable SPI and generic
 104           ADS7846-based touchscreen driver.
 105
 106 config TOUCHSCREEN_DA9034
 107         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 108         depends on PMIC_DA903X
 109         default y
 110         help
 111           Say Y here to enable the support for the touchscreen found
 112           on Dialog Semiconductor DA9034 PMIC.
 113
 114 config TOUCHSCREEN_FUJITSU
 115         tristate "Fujitsu serial touchscreen"
 116         select SERIO
 117         help
 118           Say Y here if you have the Fujitsu touchscreen (such as one
 119           installed in Lifebook P series laptop) connected to your
 120           system.
 121
 122           If unsure, say N.
 123
 124           To compile this driver as a module, choose M here: the
 125           module will be called fujitsu-ts.
 126
 127 config TOUCHSCREEN_GUNZE
 128         tristate "Gunze AHL-51S touchscreen"
 129         select SERIO
 130         help
 131           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 132           your system.
 133
 134           If unsure, say N.
 135
 136           To compile this driver as a module, choose M here: the
 137           module will be called gunze.
 138
 139 config TOUCHSCREEN_ELO
 140         tristate "Elo serial touchscreens"
 141         select SERIO
 142         help
 143           Say Y here if you have an Elo serial touchscreen connected to
 144           your system.
 145
 146           If unsure, say N.
 147
 148           To compile this driver as a module, choose M here: the
 149           module will be called elo.
 150
 151 config TOUCHSCREEN_WACOM_W8001
 152         tristate "Wacom W8001 penabled serial touchscreen"
 153         select SERIO
 154         help
 155           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 156           connected to your system.
 157
 158           If unsure, say N.
 159
 160           To compile this driver as a module, choose M here: the
 161           module will be called wacom_w8001.
 162
 163
 164 config TOUCHSCREEN_MTOUCH
 165         tristate "MicroTouch serial touchscreens"
 166         select SERIO
 167         help
 168           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 169           your system.
 170
 171           If unsure, say N.
 172
 173           To compile this driver as a module, choose M here: the
 174           module will be called mtouch.
 175
 176 config TOUCHSCREEN_INEXIO
 177         tristate "iNexio serial touchscreens"
 178         select SERIO
 179         help
 180           Say Y here if you have an iNexio serial touchscreen connected to
 181           your system.
 182
 183           If unsure, say N.
 184
 185           To compile this driver as a module, choose M here: the
 186           module will be called inexio.
 187
 188 config TOUCHSCREEN_MK712
 189         tristate "ICS MicroClock MK712 touchscreen"
 190         help
 191           Say Y here if you have the ICS MicroClock MK712 touchscreen
 192           controller chip in your system.
 193
 194           If unsure, say N.
 195
 196           To compile this driver as a module, choose M here: the
 197           module will be called mk712.
 198
 199 config TOUCHSCREEN_HP600
 200         tristate "HP Jornada 6xx touchscreen"
 201         depends on SH_HP6XX && SH_ADC
 202         help
 203           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 204           support the built-in touchscreen.
 205
 206           To compile this driver as a module, choose M here: the
 207           module will be called hp680_ts_input.
 208
 209 config TOUCHSCREEN_HP7XX
 210         tristate "HP Jornada 7xx touchscreen"
 211         depends on SA1100_JORNADA720_SSP
 212         help
 213           Say Y here if you have a HP Jornada 710/720/728 and want
 214           to support the built-in touchscreen.
 215
 216           To compile this driver as a module, choose M here: the
 217           module will be called jornada720_ts.
 218
 219 config TOUCHSCREEN_HTCPEN
 220         tristate "HTC Shift X9500 touchscreen"
 221         depends on ISA
 222         help
 223           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 224           Clio / Shangrila and want to support the built-in touchscreen.
 225
 226           If unsure, say N.
 227
 228           To compile this driver as a module, choose M here: the
 229           module will be called htcpen.
 230
 231 config TOUCHSCREEN_PENMOUNT
 232         tristate "Penmount serial touchscreen"
 233         select SERIO
 234         help
 235           Say Y here if you have a Penmount serial touchscreen connected to
 236           your system.
 237
 238           If unsure, say N.
 239
 240           To compile this driver as a module, choose M here: the
 241           module will be called penmount.
 242
 243 config TOUCHSCREEN_MIGOR
 244         tristate "Renesas MIGO-R touchscreen"
 245         depends on SH_MIGOR && I2C
 246         help
 247           Say Y here to enable MIGO-R touchscreen support.
 248
 249           If unsure, say N.
 250
 251           To compile this driver as a module, choose M here: the
 252           module will be called migor_ts.
 253
 254 config TOUCHSCREEN_TOUCHRIGHT
 255         tristate "Touchright serial touchscreen"
 256         select SERIO
 257         help
 258           Say Y here if you have a Touchright serial touchscreen connected to
 259           your system.
 260
 261           If unsure, say N.
 262
 263           To compile this driver as a module, choose M here: the
 264           module will be called touchright.
 265
 266 config TOUCHSCREEN_TOUCHWIN
 267         tristate "Touchwin serial touchscreen"
 268         select SERIO
 269         help
 270           Say Y here if you have a Touchwin serial touchscreen connected to
 271           your system.
 272
 273           If unsure, say N.
 274
 275           To compile this driver as a module, choose M here: the
 276           module will be called touchwin.
 277
 278 config TOUCHSCREEN_ATMEL_TSADCC
 279         tristate "Atmel Touchscreen Interface"
 280         depends on ARCH_AT91SAM9RL
 281         help
 282           Say Y here if you have a 4-wire touchscreen connected to the
 283           ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
 284
 285           If unsure, say N.
 286
 287           To compile this driver as a module, choose M here: the
 288           module will be called atmel_tsadcc.
 289
 290 config TOUCHSCREEN_UCB1400
 291         tristate "Philips UCB1400 touchscreen"
 292         depends on AC97_BUS
 293         depends on UCB1400_CORE
 294         help
 295           This enables support for the Philips UCB1400 touchscreen interface.
 296           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 297           will be initialized only after the ALSA subsystem has been
 298           brought up and the UCB1400 detected.  You therefore have to
 299           configure ALSA support as well (either built-in or modular,
 300           independently of whether this driver is itself built-in or
 301           modular) for this driver to work.
 302
 303           To compile this driver as a module, choose M here: the
 304           module will be called ucb1400_ts.
 305
 306 config TOUCHSCREEN_WM97XX
 307         tristate "Support for WM97xx AC97 touchscreen controllers"
 308         depends on AC97_BUS
 309         help
 310           Say Y here if you have a Wolfson Microelectronics WM97xx
 311           touchscreen connected to your system. Note that this option
 312           only enables core driver, you will also need to select
 313           support for appropriate chip below.
 314
 315           If unsure, say N.
 316
 317           To compile this driver as a module, choose M here: the
 318           module will be called wm97xx-ts.
 319
 320 config TOUCHSCREEN_WM9705
 321         bool "WM9705 Touchscreen interface support"
 322         depends on TOUCHSCREEN_WM97XX
 323         default y
 324         help
 325           Say Y here to enable support for the Wolfson Microelectronics
 326           WM9705 touchscreen controller.
 327
 328 config TOUCHSCREEN_WM9712
 329         bool "WM9712 Touchscreen interface support"
 330         depends on TOUCHSCREEN_WM97XX
 331         default y
 332         help
 333           Say Y here to enable support for the Wolfson Microelectronics
 334           WM9712 touchscreen controller.
 335
 336 config TOUCHSCREEN_WM9713
 337         bool "WM9713 Touchscreen interface support"
 338         depends on TOUCHSCREEN_WM97XX
 339         default y
 340         help
 341           Say Y here to enable support for the Wolfson Microelectronics
 342           WM9713 touchscreen controller.
 343
 344 config TOUCHSCREEN_WM97XX_ATMEL
 345         tristate "WM97xx Atmel accelerated touch"
 346         depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
 347         help
 348           Say Y here for support for streaming mode with WM97xx touchscreens
 349           on Atmel AT91 or AVR32 systems with an AC97C module.
 350
 351           Be aware that this will use channel B in the controller for
 352           streaming data, this must not conflict with other AC97C drivers.
 353
 354           If unsure, say N.
 355
 356           To compile this driver as a module, choose M here: the module will
 357           be called atmel-wm97xx.
 358
 359 config TOUCHSCREEN_WM97XX_MAINSTONE
 360         tristate "WM97xx Mainstone accelerated touch"
 361         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 362         help
 363           Say Y here for support for streaming mode with WM97xx touchscreens
 364           on Mainstone systems.
 365
 366           If unsure, say N.
 367
 368           To compile this driver as a module, choose M here: the
 369           module will be called mainstone-wm97xx.
 370
 371 config TOUCHSCREEN_WM97XX_ZYLONITE
 372         tristate "Zylonite accelerated touch"
 373         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 374         select TOUCHSCREEN_WM9713
 375         help
 376           Say Y here for support for streaming mode with the touchscreen
 377           on Zylonite systems.
 378
 379           If unsure, say N.
 380
 381           To compile this driver as a module, choose M here: the
 382           module will be called zylonite-wm97xx.
 383
 384 config TOUCHSCREEN_USB_COMPOSITE
 385         tristate "USB Touchscreen Driver"
 386         depends on USB_ARCH_HAS_HCD
 387         select USB
 388         help
 389           USB Touchscreen driver for:
 390           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 391           - PanJit TouchSet USB
 392           - 3M MicroTouch USB (EX II series)
 393           - ITM
 394           - some other eTurboTouch
 395           - Gunze AHL61
 396           - DMC TSC-10/25
 397           - IRTOUCHSYSTEMS/UNITOP
 398           - IdealTEK URTC1000
 399           - GoTop Super_Q2/GogoPen/PenPower tablets
 400
 401           Have a look at <http://linux.chapter7.ch/touchkit/> for
 402           a usage description and the required user-space stuff.
 403
 404           To compile this driver as a module, choose M here: the
 405           module will be called usbtouchscreen.
 406
 407 config TOUCHSCREEN_USB_EGALAX
 408         default y
 409         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
 410         depends on TOUCHSCREEN_USB_COMPOSITE
 411
 412 config TOUCHSCREEN_USB_PANJIT
 413         default y
 414         bool "PanJit device support" if EMBEDDED
 415         depends on TOUCHSCREEN_USB_COMPOSITE
 416
 417 config TOUCHSCREEN_USB_3M
 418         default y
 419         bool "3M/Microtouch EX II series device support" if EMBEDDED
 420         depends on TOUCHSCREEN_USB_COMPOSITE
 421
 422 config TOUCHSCREEN_USB_ITM
 423         default y
 424         bool "ITM device support" if EMBEDDED
 425         depends on TOUCHSCREEN_USB_COMPOSITE
 426
 427 config TOUCHSCREEN_USB_ETURBO
 428         default y
 429         bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
 430         depends on TOUCHSCREEN_USB_COMPOSITE
 431
 432 config TOUCHSCREEN_USB_GUNZE
 433         default y
 434         bool "Gunze AHL61 device support" if EMBEDDED
 435         depends on TOUCHSCREEN_USB_COMPOSITE
 436
 437 config TOUCHSCREEN_USB_DMC_TSC10
 438         default y
 439         bool "DMC TSC-10/25 device support" if EMBEDDED
 440         depends on TOUCHSCREEN_USB_COMPOSITE
 441
 442 config TOUCHSCREEN_USB_IRTOUCH
 443         default y
 444         bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
 445         depends on TOUCHSCREEN_USB_COMPOSITE
 446
 447 config TOUCHSCREEN_USB_IDEALTEK
 448         default y
 449         bool "IdealTEK URTC1000 device support" if EMBEDDED
 450         depends on TOUCHSCREEN_USB_COMPOSITE
 451
 452 config TOUCHSCREEN_USB_GENERAL_TOUCH
 453         default y
 454         bool "GeneralTouch Touchscreen device support" if EMBEDDED
 455         depends on TOUCHSCREEN_USB_COMPOSITE
 456
 457 config TOUCHSCREEN_USB_GOTOP
 458         default y
 459         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
 460         depends on TOUCHSCREEN_USB_COMPOSITE
 461
 462 config TOUCHSCREEN_TOUCHIT213
 463         tristate "Sahara TouchIT-213 touchscreen"
 464         select SERIO
 465         help
 466           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 467
 468           If unsure, say N.
 469
 470           To compile this driver as a module, choose M here: the
 471           module will be called touchit213.
 472
 473 config TOUCHSCREEN_TSC2007
 474         tristate "TSC2007 based touchscreens"
 475         depends on I2C
 476         help
 477           Say Y here if you have a TSC2007 based touchscreen.
 478
 479           If unsure, say N.
 480
 481           To compile this driver as a module, choose M here: the
 482           module will be called tsc2007.
 483
 484 endif