drivers/isdn/hisax/Kconfig

   1
   2 menu "Passive cards"
   3         depends on ISDN_I4L
   4
   5 config ISDN_DRV_HISAX
   6         tristate "HiSax SiemensChipSet driver support"
   7         select CRC_CCITT
   8         ---help---
   9           This is a driver supporting the Siemens chipset on various
  10           ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
  11           S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
  12           compatibles).
  13
  14           HiSax is just the name of this driver, not the name of any hardware.
  15
  16           If you have a card with such a chipset, you should say Y here and
  17           also to the configuration option of the driver for your particular
  18           card, below.
  19
  20 if ISDN_DRV_HISAX!=n
  21
  22 comment "D-channel protocol features"
  23
  24 config HISAX_EURO
  25         bool "HiSax Support for EURO/DSS1"
  26         help
  27           Say Y or N according to the D-channel protocol which your local
  28           telephone service company provides.
  29
  30           The call control protocol E-DSS1 is used in most European countries.
  31           If unsure, say Y.
  32
  33 config DE_AOC
  34         bool "Support for german chargeinfo"
  35         depends on HISAX_EURO
  36         help
  37           If you want that the HiSax hardware driver sends messages to the
  38           upper level of the isdn code on each AOCD (Advice Of Charge, During
  39           the call -- transmission of the fee information during a call) and
  40           on each AOCE (Advice Of Charge, at the End of the call --
  41           transmission of fee information at the end of the call), say Y here.
  42           This works only in Germany.
  43
  44 config HISAX_NO_SENDCOMPLETE
  45         bool "Disable sending complete"
  46         depends on HISAX_EURO
  47         help
  48           If you have trouble with some ugly exchanges or you live in
  49           Australia select this option.
  50
  51 config HISAX_NO_LLC
  52         bool "Disable sending low layer compatibility"
  53         depends on HISAX_EURO
  54         help
  55           If you have trouble with some ugly exchanges try to select this
  56           option.
  57
  58 config HISAX_NO_KEYPAD
  59         bool "Disable keypad protocol option"
  60         depends on HISAX_EURO
  61         help
  62           If you like to send special dial strings including * or # without
  63           using the keypad protocol, select this option.
  64
  65 config HISAX_1TR6
  66         bool "HiSax Support for german 1TR6"
  67         help
  68           Say Y or N according to the D-channel protocol which your local
  69           telephone service company provides.
  70
  71           1TR6 is an old call control protocol which was used in Germany
  72           before E-DSS1 was established. Nowadays, all new lines in Germany
  73           use E-DSS1.
  74
  75 config HISAX_NI1
  76         bool "HiSax Support for US NI1"
  77         help
  78           Enable this if you like to use ISDN in US on a NI1 basic rate
  79           interface.
  80
  81 config HISAX_MAX_CARDS
  82         int "Maximum number of cards supported by HiSax"
  83         default "8"
  84         help
  85           This option allows you to specify the maximum number of cards which
  86           the HiSax driver will be able to handle.
  87
  88 comment "HiSax supported cards"
  89
  90 config HISAX_16_0
  91         bool "Teles 16.0/8.0"
  92         depends on ISA
  93         help
  94           This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
  95           and many compatibles.
  96
  97           See <file:Documentation/isdn/README.HiSax> on how to configure it
  98           using the different cards, a different D-channel protocol, or
  99           non-standard IRQ/port/shmem settings.
 100
 101 config HISAX_16_3
 102         bool "Teles 16.3 or PNP or PCMCIA"
 103         help
 104           This enables HiSax support for the Teles ISDN-cards S0-16.3 the
 105           Teles/Creatix PnP and the Teles PCMCIA.
 106
 107           See <file:Documentation/isdn/README.HiSax> on how to configure it
 108           using the different cards, a different D-channel protocol, or
 109           non-standard IRQ/port settings.
 110
 111 config HISAX_TELESPCI
 112         bool "Teles PCI"
 113         depends on PCI && (BROKEN || !(SPARC64 || PPC))
 114         help
 115           This enables HiSax support for the Teles PCI.
 116           See <file:Documentation/isdn/README.HiSax> on how to configure it.
 117
 118 config HISAX_S0BOX
 119         bool "Teles S0Box"
 120         help
 121           This enables HiSax support for the Teles/Creatix parallel port
 122           S0BOX.  See <file:Documentation/isdn/README.HiSax> on how to
 123           configure it.
 124
 125 config HISAX_AVM_A1
 126         bool "AVM A1 (Fritz)"
 127         depends on ISA
 128         help
 129           This enables HiSax support for the AVM A1 (aka "Fritz").
 130
 131           See <file:Documentation/isdn/README.HiSax> on how to configure it
 132           using the different cards, a different D-channel protocol, or
 133           non-standard IRQ/port settings.
 134
 135 config HISAX_FRITZPCI
 136         bool "AVM PnP/PCI (Fritz!PnP/PCI)"
 137         help
 138           This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
 139           See <file:Documentation/isdn/README.HiSax> on how to configure it.
 140
 141 config HISAX_AVM_A1_PCMCIA
 142         bool "AVM A1 PCMCIA (Fritz)"
 143         help
 144           This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
 145           See <file:Documentation/isdn/README.HiSax> on how to configure it.
 146
 147 config HISAX_ELSA
 148         bool "Elsa cards"
 149         help
 150           This enables HiSax support for the Elsa Mircolink ISA cards, for the
 151           Elsa Quickstep series cards and Elsa PCMCIA.
 152
 153           See <file:Documentation/isdn/README.HiSax> on how to configure it
 154           using the different cards, a different D-channel protocol, or
 155           non-standard IRQ/port settings.
 156
 157 config HISAX_IX1MICROR2
 158         bool "ITK ix1-micro Revision 2"
 159         depends on ISA
 160         help
 161           This enables HiSax support for the ITK ix1-micro Revision 2 card.
 162
 163           See <file:Documentation/isdn/README.HiSax> on how to configure it
 164           using the different cards, a different D-channel protocol, or
 165           non-standard IRQ/port settings.
 166
 167 config HISAX_DIEHLDIVA
 168         bool "Eicon.Diehl Diva cards"
 169         help
 170           This enables HiSax support for the Eicon.Diehl Diva none PRO
 171           versions passive ISDN cards.
 172
 173           See <file:Documentation/isdn/README.HiSax> on how to configure it
 174           using the different cards, a different D-channel protocol, or
 175           non-standard IRQ/port settings.
 176
 177 config HISAX_ASUSCOM
 178         bool "ASUSCOM ISA cards"
 179         depends on ISA
 180         help
 181           This enables HiSax support for the AsusCom and their OEM versions
 182           passive ISDN ISA cards.
 183
 184           See <file:Documentation/isdn/README.HiSax> on how to configure it
 185           using the different cards, a different D-channel protocol, or
 186           non-standard IRQ/port settings.
 187
 188 config HISAX_TELEINT
 189         bool "TELEINT cards"
 190         depends on ISA
 191         help
 192           This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
 193
 194           See <file:Documentation/isdn/README.HiSax> on how to configure it
 195           using the different cards, a different D-channel protocol, or
 196           non-standard IRQ/port settings.
 197
 198 config HISAX_HFCS
 199         bool "HFC-S based cards"
 200         depends on ISA
 201         help
 202           This enables HiSax support for the HFC-S 2BDS0 based cards, like
 203           teles 16.3c.
 204
 205           See <file:Documentation/isdn/README.HiSax> on how to configure it
 206           using the different cards, a different D-channel protocol, or
 207           non-standard IRQ/port settings.
 208
 209 config HISAX_SEDLBAUER
 210         bool "Sedlbauer cards"
 211         help
 212           This enables HiSax support for the Sedlbauer passive ISDN cards.
 213
 214           See <file:Documentation/isdn/README.HiSax> on how to configure it
 215           using the different cards, a different D-channel protocol, or
 216           non-standard IRQ/port settings.
 217
 218 config HISAX_SPORTSTER
 219         bool "USR Sportster internal TA"
 220         depends on ISA
 221         help
 222           This enables HiSax support for the USR Sportster internal TA card.
 223
 224           See <file:Documentation/isdn/README.HiSax> on how to configure it
 225           using a different D-channel protocol, or non-standard IRQ/port
 226           settings.
 227
 228 config HISAX_MIC
 229         bool "MIC card"
 230         depends on ISA
 231         help
 232           This enables HiSax support for the ITH MIC card.
 233
 234           See <file:Documentation/isdn/README.HiSax> on how to configure it
 235           using a different D-channel protocol, or non-standard IRQ/port
 236           settings.
 237
 238 config HISAX_NETJET
 239         bool "NETjet card"
 240         depends on PCI && (BROKEN || !(SPARC64 || PPC))
 241         help
 242           This enables HiSax support for the NetJet from Traverse
 243           Technologies.
 244
 245           See <file:Documentation/isdn/README.HiSax> on how to configure it
 246           using a different D-channel protocol, or non-standard IRQ/port
 247           settings.
 248
 249 config HISAX_NETJET_U
 250         bool "NETspider U card"
 251         depends on PCI && (BROKEN || !(SPARC64 || PPC))
 252         help
 253           This enables HiSax support for the Netspider U interface ISDN card
 254           from Traverse Technologies.
 255           See <file:Documentation/isdn/README.HiSax> on how to configure it
 256           using a different D-channel protocol, or non-standard IRQ/port
 257           settings.
 258
 259 config HISAX_NICCY
 260         bool "Niccy PnP/PCI card"
 261         help
 262           This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
 263
 264           See <file:Documentation/isdn/README.HiSax> on how to configure it
 265           using a different D-channel protocol, or non-standard IRQ/port
 266           settings.
 267
 268 config HISAX_ISURF
 269         bool "Siemens I-Surf card"
 270         depends on ISA
 271         help
 272           This enables HiSax support for the Siemens I-Talk/I-Surf card with
 273           ISAR chip.
 274           See <file:Documentation/isdn/README.HiSax> on how to configure it
 275           using a different D-channel protocol, or non-standard IRQ/port
 276           settings.
 277
 278 config HISAX_HSTSAPHIR
 279         bool "HST Saphir card"
 280         depends on ISA
 281         help
 282           This enables HiSax support for the HST Saphir card.
 283
 284           See <file:Documentation/isdn/README.HiSax> on how to configure it
 285           using a different D-channel protocol, or non-standard IRQ/port
 286           settings.
 287
 288 config HISAX_BKM_A4T
 289         bool "Telekom A4T card"
 290         depends on PCI
 291         help
 292           This enables HiSax support for the Telekom A4T card.
 293
 294           See <file:Documentation/isdn/README.HiSax> on how to configure it
 295           using a different D-channel protocol, or non-standard IRQ/port
 296           settings.
 297
 298 config HISAX_SCT_QUADRO
 299         bool "Scitel Quadro card"
 300         depends on PCI
 301         help
 302           This enables HiSax support for the Scitel Quadro card.
 303
 304           See <file:Documentation/isdn/README.HiSax> on how to configure it
 305           using a different D-channel protocol, or non-standard IRQ/port
 306           settings.
 307
 308 config HISAX_GAZEL
 309         bool "Gazel cards"
 310         help
 311           This enables HiSax support for the Gazel cards.
 312
 313           See <file:Documentation/isdn/README.HiSax> on how to configure it
 314           using a different D-channel protocol, or non-standard IRQ/port
 315           settings.
 316
 317 config HISAX_HFC_PCI
 318         bool "HFC PCI-Bus cards"
 319         depends on PCI && (BROKEN || !(SPARC64 || PPC))
 320         help
 321           This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
 322
 323           For more informations see under
 324           <file:Documentation/isdn/README.hfc-pci>.
 325
 326 config HISAX_W6692
 327         bool "Winbond W6692 based cards"
 328         depends on PCI
 329         help
 330           This enables HiSax support for Winbond W6692 based PCI ISDN cards.
 331
 332           See <file:Documentation/isdn/README.HiSax> on how to configure it
 333           using a different D-channel protocol, or non-standard IRQ/port
 334           settings.
 335
 336 config HISAX_HFC_SX
 337         bool "HFC-S+, HFC-SP, HFC-PCMCIA cards"
 338         help
 339           This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
 340           cards. This code is not finished yet.
 341
 342 #      bool '  TESTEMULATOR (EXPERIMENTAL)' CONFIG_HISAX_TESTEMU
 343
 344 config HISAX_ENTERNOW_PCI
 345         bool "Formula-n enter:now PCI card"
 346         depends on PCI && (BROKEN || !(SPARC64 || PPC))
 347         help
 348           This enables HiSax support for the Formula-n enter:now PCI
 349           ISDN card.
 350
 351 config HISAX_AMD7930
 352         bool "Am7930 (EXPERIMENTAL)"
 353         depends on EXPERIMENTAL && (SPARC32 || SPARC64)
 354         help
 355           This enables HiSax support for the AMD7930 chips on some SPARCs.
 356           This code is not finished yet.
 357
 358 endif
 359
 360 if ISDN_DRV_HISAX
 361
 362 config HISAX_DEBUG
 363         bool "HiSax debugging"
 364         help
 365           This enables debugging code in the new-style HiSax drivers, i.e.
 366           the ST5481 USB driver currently.
 367           If in doubt, say yes.
 368
 369 comment "HiSax PCMCIA card service modules"
 370
 371 config HISAX_SEDLBAUER_CS
 372         tristate "Sedlbauer PCMCIA cards"
 373         depends on PCMCIA && HISAX_SEDLBAUER
 374         help
 375           This enables the PCMCIA client driver for the Sedlbauer Speed Star
 376           and Speed Star II cards.
 377
 378 config HISAX_ELSA_CS
 379         tristate "ELSA PCMCIA MicroLink cards"
 380         depends on PCMCIA && HISAX_ELSA
 381         help
 382           This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
 383           card.
 384
 385 config HISAX_AVM_A1_CS
 386         tristate "AVM A1 PCMCIA cards"
 387         depends on PCMCIA && ISDN_DRV_HISAX
 388         help
 389           This enables the PCMCIA client driver for the AVM A1 / Fritz!Card
 390           PCMCIA cards.
 391
 392 config HISAX_TELES_CS
 393         tristate "TELES PCMCIA cards"
 394         depends on PCMCIA && HISAX_16_3
 395         help
 396           This enables the PCMCIA client driver for the Teles PCMCIA cards.
 397
 398 comment "HiSax sub driver modules"
 399
 400 config HISAX_ST5481
 401         tristate "ST5481 USB ISDN modem (EXPERIMENTAL)"
 402         depends on USB && EXPERIMENTAL
 403         select CRC_CCITT
 404         help
 405           This enables the driver for ST5481 based USB ISDN adapters,
 406           e.g. the BeWan Gazel 128 USB
 407
 408 config HISAX_HFCUSB
 409         tristate "HFC USB based ISDN modems (EXPERIMENTAL)"
 410         depends on USB && EXPERIMENTAL
 411         help
 412           This enables the driver for HFC USB based ISDN modems.
 413
 414 config HISAX_HFC4S8S
 415         tristate "HFC-4S/8S based ISDN cards (EXPERIMENTAL)"
 416         depends on EXPERIMENTAL
 417         help
 418           This enables the driver for HFC-4S/8S based ISDN cards.
 419
 420 config HISAX_FRITZ_PCIPNP
 421         tristate "AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)"
 422         depends on PCI && EXPERIMENTAL
 423         help
 424           This enables the driver for the AVM Fritz!Card PCI,
 425           Fritz!Card PCI v2 and Fritz!Card PnP.
 426           (the latter also needs you to select "ISA Plug and Play support"
 427           from the menu "Plug and Play configuration")
 428
 429 config HISAX_HDLC
 430         bool
 431         depends on HISAX_ST5481
 432         default y
 433
 434 config HISAX_AVM_A1_PCMCIA
 435         bool
 436         depends on HISAX_AVM_A1_CS
 437         default y
 438
 439 endif
 440
 441 endmenu
 442