drivers/isdn/hisax/Kconfig

   1
   2 menu "Passive cards"
   3
   4 config ISDN_DRV_HISAX
   5         tristate "HiSax SiemensChipSet driver support"
   6         select CRC_CCITT
   7         ---help---
   8           This is a driver supporting the Siemens chipset on various
   9           ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
  10           S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
  11           compatibles).
  12
  13           HiSax is just the name of this driver, not the name of any hardware.
  14
  15           If you have a card with such a chipset, you should say Y here and
  16           also to the configuration option of the driver for your particular
  17           card, below.
  18
  19 if ISDN_DRV_HISAX
  20
  21 comment "D-channel protocol features"
  22
  23 config HISAX_EURO
  24         bool "HiSax Support for EURO/DSS1"
  25         help
  26           Say Y or N according to the D-channel protocol which your local
  27           telephone service company provides.
  28
  29           The call control protocol E-DSS1 is used in most European countries.
  30           If unsure, say Y.
  31
  32 config DE_AOC
  33         bool "Support for german chargeinfo"
  34         depends on HISAX_EURO
  35         help
  36           If you want that the HiSax hardware driver sends messages to the
  37           upper level of the isdn code on each AOCD (Advice Of Charge, During
  38           the call -- transmission of the fee information during a call) and
  39           on each AOCE (Advice Of Charge, at the End of the call --
  40           transmission of fee information at the end of the call), say Y here.
  41           This works only in Germany.
  42
  43 config HISAX_NO_SENDCOMPLETE
  44         bool "Disable sending complete"
  45         depends on HISAX_EURO
  46         help
  47           If you have trouble with some ugly exchanges or you live in
  48           Australia select this option.
  49
  50 config HISAX_NO_LLC
  51         bool "Disable sending low layer compatibility"
  52         depends on HISAX_EURO
  53         help
  54           If you have trouble with some ugly exchanges try to select this
  55           option.
  56
  57 config HISAX_NO_KEYPAD
  58         bool "Disable keypad protocol option"
  59         depends on HISAX_EURO
  60         help
  61           If you like to send special dial strings including * or # without
  62           using the keypad protocol, select this option.
  63
  64 config HISAX_1TR6
  65         bool "HiSax Support for german 1TR6"
  66         help
  67           Say Y or N according to the D-channel protocol which your local
  68           telephone service company provides.
  69
  70           1TR6 is an old call control protocol which was used in Germany
  71           before E-DSS1 was established. Nowadays, all new lines in Germany
  72           use E-DSS1.
  73
  74 config HISAX_NI1
  75         bool "HiSax Support for US NI1"
  76         help
  77           Enable this if you like to use ISDN in US on a NI1 basic rate
  78           interface.
  79
  80 config HISAX_MAX_CARDS
  81         int "Maximum number of cards supported by HiSax"
  82         default "8"
  83         help
  84           This option allows you to specify the maximum number of cards which
  85           the HiSax driver will be able to handle.
  86
  87 comment "HiSax supported cards"
  88
  89 config HISAX_16_0
  90         bool "Teles 16.0/8.0"
  91         depends on ISA
  92         help
  93           This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
  94           and many compatibles.
  95
  96           See <file:Documentation/isdn/README.HiSax> on how to configure it
  97           using the different cards, a different D-channel protocol, or
  98           non-standard IRQ/port/shmem settings.
  99
 100 config HISAX_16_3
 101         bool "Teles 16.3 or PNP or PCMCIA"
 102         help
 103           This enables HiSax support for the Teles ISDN-cards S0-16.3 the
 104           Teles/Creatix PnP and the Teles PCMCIA.
 105
 106           See <file:Documentation/isdn/README.HiSax> on how to configure it
 107           using the different cards, a different D-channel protocol, or
 108           non-standard IRQ/port settings.
 109
 110 config HISAX_TELESPCI
 111         bool "Teles PCI"
 112         depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
 113         help
 114           This enables HiSax support for the Teles PCI.
 115           See <file:Documentation/isdn/README.HiSax> on how to configure it.
 116
 117 config HISAX_S0BOX
 118         bool "Teles S0Box"
 119         help
 120           This enables HiSax support for the Teles/Creatix parallel port
 121           S0BOX.  See <file:Documentation/isdn/README.HiSax> on how to
 122           configure it.
 123
 124 config HISAX_AVM_A1
 125         bool "AVM A1 (Fritz)"
 126         depends on ISA
 127         help
 128           This enables HiSax support for the AVM A1 (aka "Fritz").
 129
 130           See <file:Documentation/isdn/README.HiSax> on how to configure it
 131           using the different cards, a different D-channel protocol, or
 132           non-standard IRQ/port settings.
 133
 134 config HISAX_FRITZPCI
 135         bool "AVM PnP/PCI (Fritz!PnP/PCI)"
 136         depends on BROKEN || !PPC64
 137         help
 138           This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
 139           See <file:Documentation/isdn/README.HiSax> on how to configure it.
 140
 141 config HISAX_AVM_A1_PCMCIA
 142         bool "AVM A1 PCMCIA (Fritz)"
 143         help
 144           This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
 145           See <file:Documentation/isdn/README.HiSax> on how to configure it.
 146
 147 config HISAX_ELSA
 148         bool "Elsa cards"
 149         help
 150           This enables HiSax support for the Elsa Mircolink ISA cards, for the
 151           Elsa Quickstep series cards and Elsa PCMCIA.
 152
 153           See <file:Documentation/isdn/README.HiSax> on how to configure it
 154           using the different cards, a different D-channel protocol, or
 155           non-standard IRQ/port settings.
 156
 157 config HISAX_IX1MICROR2
 158         bool "ITK ix1-micro Revision 2"
 159         depends on ISA
 160         help
 161           This enables HiSax support for the ITK ix1-micro Revision 2 card.
 162
 163           See <file:Documentation/isdn/README.HiSax> on how to configure it
 164           using the different cards, a different D-channel protocol, or
 165           non-standard IRQ/port settings.
 166
 167 config HISAX_DIEHLDIVA
 168         bool "Eicon.Diehl Diva cards"
 169         help
 170           This enables HiSax support for the Eicon.Diehl Diva none PRO
 171           versions passive ISDN cards.
 172
 173           See <file:Documentation/isdn/README.HiSax> on how to configure it
 174           using the different cards, a different D-channel protocol, or
 175           non-standard IRQ/port settings.
 176
 177 config HISAX_ASUSCOM
 178         bool "ASUSCOM ISA cards"
 179         depends on ISA
 180         help
 181           This enables HiSax support for the AsusCom and their OEM versions
 182           passive ISDN ISA cards.
 183
 184           See <file:Documentation/isdn/README.HiSax> on how to configure it
 185           using the different cards, a different D-channel protocol, or
 186           non-standard IRQ/port settings.
 187
 188 config HISAX_TELEINT
 189         bool "TELEINT cards"
 190         depends on ISA
 191         help
 192           This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
 193
 194           See <file:Documentation/isdn/README.HiSax> on how to configure it
 195           using the different cards, a different D-channel protocol, or
 196           non-standard IRQ/port settings.
 197
 198 config HISAX_HFCS
 199         bool "HFC-S based cards"
 200         depends on ISA
 201         help
 202           This enables HiSax support for the HFC-S 2BDS0 based cards, like
 203           teles 16.3c.
 204
 205           See <file:Documentation/isdn/README.HiSax> on how to configure it
 206           using the different cards, a different D-channel protocol, or
 207           non-standard IRQ/port settings.
 208
 209 config HISAX_SEDLBAUER
 210         bool "Sedlbauer cards"
 211         help
 212           This enables HiSax support for the Sedlbauer passive ISDN cards.
 213
 214           See <file:Documentation/isdn/README.HiSax> on how to configure it
 215           using the different cards, a different D-channel protocol, or
 216           non-standard IRQ/port settings.
 217
 218 config HISAX_SPORTSTER
 219         bool "USR Sportster internal TA"
 220         depends on ISA
 221         help
 222           This enables HiSax support for the USR Sportster internal TA card.
 223
 224           See <file:Documentation/isdn/README.HiSax> on how to configure it
 225           using a different D-channel protocol, or non-standard IRQ/port
 226           settings.
 227
 228 config HISAX_MIC
 229         bool "MIC card"
 230         depends on ISA
 231         help
 232           This enables HiSax support for the ITH MIC card.
 233
 234           See <file:Documentation/isdn/README.HiSax> on how to configure it
 235           using a different D-channel protocol, or non-standard IRQ/port
 236           settings.
 237
 238 config HISAX_NETJET
 239         bool "NETjet card"
 240         depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
 241         depends on VIRT_TO_BUS
 242         help
 243           This enables HiSax support for the NetJet from Traverse
 244           Technologies.
 245
 246           See <file:Documentation/isdn/README.HiSax> on how to configure it
 247           using a different D-channel protocol, or non-standard IRQ/port
 248           settings.
 249
 250 config HISAX_NETJET_U
 251         bool "NETspider U card"
 252         depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN) || MICROBLAZE))
 253         depends on VIRT_TO_BUS
 254         help
 255           This enables HiSax support for the Netspider U interface ISDN card
 256           from Traverse Technologies.
 257           See <file:Documentation/isdn/README.HiSax> on how to configure it
 258           using a different D-channel protocol, or non-standard IRQ/port
 259           settings.
 260
 261 config HISAX_NICCY
 262         bool "Niccy PnP/PCI card"
 263         help
 264           This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
 265
 266           See <file:Documentation/isdn/README.HiSax> on how to configure it
 267           using a different D-channel protocol, or non-standard IRQ/port
 268           settings.
 269
 270 config HISAX_ISURF
 271         bool "Siemens I-Surf card"
 272         depends on ISA
 273         help
 274           This enables HiSax support for the Siemens I-Talk/I-Surf card with
 275           ISAR chip.
 276           See <file:Documentation/isdn/README.HiSax> on how to configure it
 277           using a different D-channel protocol, or non-standard IRQ/port
 278           settings.
 279
 280 config HISAX_HSTSAPHIR
 281         bool "HST Saphir card"
 282         depends on ISA
 283         help
 284           This enables HiSax support for the HST Saphir card.
 285
 286           See <file:Documentation/isdn/README.HiSax> on how to configure it
 287           using a different D-channel protocol, or non-standard IRQ/port
 288           settings.
 289
 290 config HISAX_BKM_A4T
 291         bool "Telekom A4T card"
 292         depends on PCI
 293         help
 294           This enables HiSax support for the Telekom A4T card.
 295
 296           See <file:Documentation/isdn/README.HiSax> on how to configure it
 297           using a different D-channel protocol, or non-standard IRQ/port
 298           settings.
 299
 300 config HISAX_SCT_QUADRO
 301         bool "Scitel Quadro card"
 302         depends on PCI
 303         help
 304           This enables HiSax support for the Scitel Quadro card.
 305
 306           See <file:Documentation/isdn/README.HiSax> on how to configure it
 307           using a different D-channel protocol, or non-standard IRQ/port
 308           settings.
 309
 310 config HISAX_GAZEL
 311         bool "Gazel cards"
 312         help
 313           This enables HiSax support for the Gazel cards.
 314
 315           See <file:Documentation/isdn/README.HiSax> on how to configure it
 316           using a different D-channel protocol, or non-standard IRQ/port
 317           settings.
 318
 319 config HISAX_HFC_PCI
 320         bool "HFC PCI-Bus cards"
 321         depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
 322         help
 323           This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
 324
 325           For more information see under
 326           <file:Documentation/isdn/README.hfc-pci>.
 327
 328 config HISAX_W6692
 329         bool "Winbond W6692 based cards"
 330         depends on PCI
 331         help
 332           This enables HiSax support for Winbond W6692 based PCI ISDN cards.
 333
 334           See <file:Documentation/isdn/README.HiSax> on how to configure it
 335           using a different D-channel protocol, or non-standard IRQ/port
 336           settings.
 337
 338 config HISAX_HFC_SX
 339         bool "HFC-S+, HFC-SP, HFC-PCMCIA cards"
 340         help
 341           This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
 342           cards. This code is not finished yet.
 343
 344 config HISAX_ENTERNOW_PCI
 345         bool "Formula-n enter:now PCI card"
 346         depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
 347         help
 348           This enables HiSax support for the Formula-n enter:now PCI
 349           ISDN card.
 350
 351 config HISAX_DEBUG
 352         bool "HiSax debugging"
 353         help
 354           This enables debugging code in the new-style HiSax drivers, i.e.
 355           the ST5481 USB driver currently.
 356           If in doubt, say yes.
 357
 358 comment "HiSax PCMCIA card service modules"
 359
 360 config HISAX_SEDLBAUER_CS
 361         tristate "Sedlbauer PCMCIA cards"
 362         depends on PCMCIA && HISAX_SEDLBAUER
 363         help
 364           This enables the PCMCIA client driver for the Sedlbauer Speed Star
 365           and Speed Star II cards.
 366
 367 config HISAX_ELSA_CS
 368         tristate "ELSA PCMCIA MicroLink cards"
 369         depends on PCMCIA && HISAX_ELSA
 370         help
 371           This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
 372           card.
 373
 374 config HISAX_AVM_A1_CS
 375         tristate "AVM A1 PCMCIA cards"
 376         depends on PCMCIA && ISDN_DRV_HISAX
 377         help
 378           This enables the PCMCIA client driver for the AVM A1 / Fritz!Card
 379           PCMCIA cards.
 380
 381 config HISAX_TELES_CS
 382         tristate "TELES PCMCIA cards"
 383         depends on PCMCIA && HISAX_16_3
 384         help
 385           This enables the PCMCIA client driver for the Teles PCMCIA cards.
 386
 387 comment "HiSax sub driver modules"
 388
 389 config HISAX_ST5481
 390         tristate "ST5481 USB ISDN modem"
 391         depends on USB
 392         select ISDN_HDLC
 393         select CRC_CCITT
 394         select BITREVERSE
 395         help
 396           This enables the driver for ST5481 based USB ISDN adapters,
 397           e.g. the BeWan Gazel 128 USB
 398
 399 config HISAX_HFCUSB
 400         tristate "HFC USB based ISDN modems"
 401         depends on USB
 402         help
 403           This enables the driver for HFC USB based ISDN modems.
 404
 405 config HISAX_HFC4S8S
 406         tristate "HFC-4S/8S based ISDN cards"
 407         help
 408           This enables the driver for HFC-4S/8S based ISDN cards.
 409
 410 config HISAX_FRITZ_PCIPNP
 411         tristate "AVM Fritz!Card PCI/PCIv2/PnP support"
 412         depends on PCI
 413         help
 414           This enables the driver for the AVM Fritz!Card PCI,
 415           Fritz!Card PCI v2 and Fritz!Card PnP.
 416           (the latter also needs you to select "ISA Plug and Play support"
 417           from the menu "Plug and Play configuration")
 418
 419 endif
 420
 421 endmenu
 422