drivers/leds/Kconfig

   1 config LEDS_GPIO_REGISTER
   2         bool
   3         help
   4           This option provides the function gpio_led_register_device.
   5           As this function is used by arch code it must not be compiled as a
   6           module.
   7
   8 menuconfig NEW_LEDS
   9         bool "LED Support"
  10         help
  11           Say Y to enable Linux LED support.  This allows control of supported
  12           LEDs from both userspace and optionally, by kernel events (triggers).
  13
  14 if NEW_LEDS
  15
  16 config LEDS_CLASS
  17         tristate "LED Class Support"
  18         help
  19           This option enables the led sysfs class in /sys/class/leds.  You'll
  20           need this to do anything useful with LEDs.  If unsure, say N.
  21
  22 config LEDS_CLASS_FLASH
  23         tristate "LED Flash Class Support"
  24         depends on LEDS_CLASS
  25         help
  26           This option enables the flash led sysfs class in /sys/class/leds.
  27           It wrapps LED Class and adds flash LEDs specific sysfs attributes
  28           and kernel internal API to it. You'll need this to provide support
  29           for the flash related features of a LED device. It can be built
  30           as a module.
  31
  32 comment "LED drivers"
  33
  34 config LEDS_88PM860X
  35         tristate "LED Support for Marvell 88PM860x PMIC"
  36         depends on LEDS_CLASS
  37         depends on MFD_88PM860X
  38         help
  39           This option enables support for on-chip LED drivers found on Marvell
  40           Semiconductor 88PM8606 PMIC.
  41
  42 config LEDS_AAT1290
  43         tristate "LED support for the AAT1290"
  44         depends on LEDS_CLASS_FLASH
  45         depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
  46         depends on GPIOLIB || COMPILE_TEST
  47         depends on OF
  48         depends on PINCTRL
  49         help
  50          This option enables support for the LEDs on the AAT1290.
  51
  52 config LEDS_BCM6328
  53         tristate "LED Support for Broadcom BCM6328"
  54         depends on LEDS_CLASS
  55         depends on HAS_IOMEM
  56         depends on OF
  57         help
  58           This option enables support for LEDs connected to the BCM6328
  59           LED HW controller accessed via MMIO registers.
  60
  61 config LEDS_BCM6358
  62         tristate "LED Support for Broadcom BCM6358"
  63         depends on LEDS_CLASS
  64         depends on HAS_IOMEM
  65         depends on OF
  66         help
  67           This option enables support for LEDs connected to the BCM6358
  68           LED HW controller accessed via MMIO registers.
  69
  70 config LEDS_LM3530
  71         tristate "LCD Backlight driver for LM3530"
  72         depends on LEDS_CLASS
  73         depends on I2C
  74         help
  75           This option enables support for the LCD backlight using
  76           LM3530 ambient light sensor chip. This ALS chip can be
  77           controlled manually or using PWM input or using ambient
  78           light automatically.
  79
  80 config LEDS_LM3533
  81         tristate "LED support for LM3533"
  82         depends on LEDS_CLASS
  83         depends on MFD_LM3533
  84         help
  85           This option enables support for the LEDs on National Semiconductor /
  86           TI LM3533 Lighting Power chips.
  87
  88           The LEDs can be controlled directly, through PWM input, or by the
  89           ambient-light-sensor interface. The chip supports
  90           hardware-accelerated blinking with maximum on and off periods of 9.8
  91           and 77 seconds respectively.
  92
  93 config LEDS_LM3642
  94         tristate "LED support for LM3642 Chip"
  95         depends on LEDS_CLASS && I2C
  96         select REGMAP_I2C
  97         help
  98           This option enables support for LEDs connected to LM3642.
  99           The LM3642 is a 4MHz fixed-frequency synchronous boost
 100           converter plus 1.5A constant current driver for a high-current
 101           white LED.
 102
 103
 104 config LEDS_LOCOMO
 105         tristate "LED Support for Locomo device"
 106         depends on LEDS_CLASS
 107         depends on SHARP_LOCOMO
 108         help
 109           This option enables support for the LEDs on Sharp Locomo.
 110           Zaurus models SL-5500 and SL-5600.
 111
 112 config LEDS_MIKROTIK_RB532
 113         tristate "LED Support for Mikrotik Routerboard 532"
 114         depends on LEDS_CLASS
 115         depends on MIKROTIK_RB532
 116         help
 117           This option enables support for the so called "User LED" of
 118           Mikrotik's Routerboard 532.
 119
 120 config LEDS_S3C24XX
 121         tristate "LED Support for Samsung S3C24XX GPIO LEDs"
 122         depends on LEDS_CLASS
 123         depends on ARCH_S3C24XX
 124         help
 125           This option enables support for LEDs connected to GPIO lines
 126           on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
 127
 128 config LEDS_NET48XX
 129         tristate "LED Support for Soekris net48xx series Error LED"
 130         depends on LEDS_CLASS
 131         depends on SCx200_GPIO
 132         help
 133           This option enables support for the Soekris net4801 and net4826 error
 134           LED.
 135
 136 config LEDS_FSG
 137         tristate "LED Support for the Freecom FSG-3"
 138         depends on LEDS_CLASS
 139         depends on MACH_FSG
 140         help
 141           This option enables support for the LEDs on the Freecom FSG-3.
 142
 143 config LEDS_WRAP
 144         tristate "LED Support for the WRAP series LEDs"
 145         depends on LEDS_CLASS
 146         depends on SCx200_GPIO
 147         help
 148           This option enables support for the PCEngines WRAP programmable LEDs.
 149
 150 config LEDS_COBALT_QUBE
 151         tristate "LED Support for the Cobalt Qube series front LED"
 152         depends on LEDS_CLASS
 153         depends on MIPS_COBALT
 154         help
 155           This option enables support for the front LED on Cobalt Qube series
 156
 157 config LEDS_COBALT_RAQ
 158         bool "LED Support for the Cobalt Raq series"
 159         depends on LEDS_CLASS=y && MIPS_COBALT
 160         select LEDS_TRIGGERS
 161         help
 162           This option enables support for the Cobalt Raq series LEDs.
 163
 164 config LEDS_SUNFIRE
 165         tristate "LED support for SunFire servers."
 166         depends on LEDS_CLASS
 167         depends on SPARC64
 168         select LEDS_TRIGGERS
 169         help
 170           This option enables support for the Left, Middle, and Right
 171           LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
 172
 173 config LEDS_IPAQ_MICRO
 174         tristate "LED Support for the Compaq iPAQ h3xxx"
 175         depends on LEDS_CLASS
 176         depends on MFD_IPAQ_MICRO
 177         help
 178           Choose this option if you want to use the notification LED on
 179           Compaq/HP iPAQ h3100 and h3600.
 180
 181 config LEDS_HP6XX
 182         tristate "LED Support for the HP Jornada 6xx"
 183         depends on LEDS_CLASS
 184         depends on SH_HP6XX
 185         help
 186           This option enables LED support for the handheld
 187           HP Jornada 620/660/680/690.
 188
 189 config LEDS_PCA9532
 190         tristate "LED driver for PCA9532 dimmer"
 191         depends on LEDS_CLASS
 192         depends on I2C && INPUT
 193         help
 194           This option enables support for NXP pca9532
 195           LED controller. It is generally only useful
 196           as a platform driver
 197
 198 config LEDS_PCA9532_GPIO
 199         bool "Enable GPIO support for PCA9532"
 200         depends on LEDS_PCA9532
 201         depends on GPIOLIB
 202         help
 203           Allow unused pins on PCA9532 to be used as gpio.
 204
 205           To use a pin as gpio pca9532_type in pca9532_platform data needs to
 206           set to PCA9532_TYPE_GPIO.
 207
 208 config LEDS_GPIO
 209         tristate "LED Support for GPIO connected LEDs"
 210         depends on LEDS_CLASS
 211         depends on GPIOLIB || COMPILE_TEST
 212         help
 213           This option enables support for the LEDs connected to GPIO
 214           outputs. To be useful the particular board must have LEDs
 215           and they must be connected to the GPIO lines.  The LEDs must be
 216           defined as platform devices and/or OpenFirmware platform devices.
 217           The code to use these bindings can be selected below.
 218
 219 config LEDS_LP3944
 220         tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
 221         depends on LEDS_CLASS
 222         depends on I2C
 223         help
 224           This option enables support for LEDs connected to the National
 225           Semiconductor LP3944 Lighting Management Unit (LMU) also known as
 226           Fun Light Chip.
 227
 228           To compile this driver as a module, choose M here: the
 229           module will be called leds-lp3944.
 230
 231 config LEDS_LP3952
 232         tristate "LED Support for TI LP3952 2 channel LED driver"
 233         depends on LEDS_CLASS
 234         depends on I2C
 235         depends on ACPI
 236         depends on GPIOLIB
 237         select REGMAP_I2C
 238         help
 239           This option enables support for LEDs connected to the Texas
 240           Instruments LP3952 LED driver.
 241
 242           To compile this driver as a module, choose M here: the
 243           module will be called leds-lp3952.
 244
 245 config LEDS_LP55XX_COMMON
 246         tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
 247         depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
 248         select FW_LOADER
 249         select FW_LOADER_USER_HELPER
 250         help
 251           This option supports common operations for LP5521/5523/55231/5562/8501
 252           devices.
 253
 254 config LEDS_LP5521
 255         tristate "LED Support for N.S. LP5521 LED driver chip"
 256         depends on LEDS_CLASS && I2C
 257         select LEDS_LP55XX_COMMON
 258         help
 259           If you say yes here you get support for the National Semiconductor
 260           LP5521 LED driver. It is 3 channel chip with programmable engines.
 261           Driver provides direct control via LED class and interface for
 262           programming the engines.
 263
 264 config LEDS_LP5523
 265         tristate "LED Support for TI/National LP5523/55231 LED driver chip"
 266         depends on LEDS_CLASS && I2C
 267         select LEDS_LP55XX_COMMON
 268         help
 269           If you say yes here you get support for TI/National Semiconductor
 270           LP5523/55231 LED driver.
 271           It is 9 channel chip with programmable engines.
 272           Driver provides direct control via LED class and interface for
 273           programming the engines.
 274
 275 config LEDS_LP5562
 276         tristate "LED Support for TI LP5562 LED driver chip"
 277         depends on LEDS_CLASS && I2C
 278         select LEDS_LP55XX_COMMON
 279         help
 280           If you say yes here you get support for TI LP5562 LED driver.
 281           It is 4 channels chip with programmable engines.
 282           Driver provides direct control via LED class and interface for
 283           programming the engines.
 284
 285 config LEDS_LP8501
 286         tristate "LED Support for TI LP8501 LED driver chip"
 287         depends on LEDS_CLASS && I2C
 288         select LEDS_LP55XX_COMMON
 289         help
 290           If you say yes here you get support for TI LP8501 LED driver.
 291           It is 9 channel chip with programmable engines.
 292           Driver provides direct control via LED class and interface for
 293           programming the engines.
 294           It is similar as LP5523, but output power selection is available.
 295           And register layout and engine program schemes are different.
 296
 297 config LEDS_LP8788
 298         tristate "LED support for the TI LP8788 PMIC"
 299         depends on LEDS_CLASS
 300         depends on MFD_LP8788
 301         help
 302           This option enables support for the Keyboard LEDs on the LP8788 PMIC.
 303
 304 config LEDS_LP8860
 305         tristate "LED support for the TI LP8860 4 channel LED driver"
 306         depends on LEDS_CLASS && I2C
 307         select REGMAP_I2C
 308         help
 309           If you say yes here you get support for the TI LP8860 4 channel
 310           LED driver.
 311           This option enables support for the display cluster LEDs
 312           on the LP8860 4 channel LED driver using the I2C communication
 313           bus.
 314
 315 config LEDS_CLEVO_MAIL
 316         tristate "Mail LED on Clevo notebook"
 317         depends on LEDS_CLASS
 318         depends on X86 && SERIO_I8042 && DMI
 319         help
 320           This driver makes the mail LED accessible from userspace
 321           programs through the leds subsystem. This LED have three
 322           known mode: off, blink at 0.5Hz and blink at 1Hz.
 323
 324           The driver supports two kinds of interface: using ledtrig-timer
 325           or through /sys/class/leds/clevo::mail/brightness. As this LED
 326           cannot change it's brightness it blinks instead. The brightness
 327           value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means
 328           blink at 1Hz.
 329
 330           This module can drive the mail LED for the following notebooks:
 331
 332                 Clevo D400P
 333                 Clevo D410J
 334                 Clevo D410V
 335                 Clevo D400V/D470V (not tested, but might work)
 336                 Clevo M540N
 337                 Clevo M5x0N (not tested, but might work)
 338                 Positivo Mobile (Clevo M5x0V)
 339
 340           If your model is not listed here you can try the "nodetect"
 341           module parameter.
 342
 343           To compile this driver as a module, choose M here: the
 344           module will be called leds-clevo-mail.
 345
 346 config LEDS_PCA955X
 347         tristate "LED Support for PCA955x I2C chips"
 348         depends on LEDS_CLASS
 349         depends on I2C
 350         help
 351           This option enables support for LEDs connected to PCA955x
 352           LED driver chips accessed via the I2C bus.  Supported
 353           devices include PCA9550, PCA9551, PCA9552, and PCA9553.
 354
 355 config LEDS_PCA963X
 356         tristate "LED support for PCA963x I2C chip"
 357         depends on LEDS_CLASS
 358         depends on I2C
 359         help
 360           This option enables support for LEDs connected to the PCA963x
 361           LED driver chip accessed via the I2C bus. Supported
 362           devices include PCA9633 and PCA9634
 363
 364 config LEDS_WM831X_STATUS
 365         tristate "LED support for status LEDs on WM831x PMICs"
 366         depends on LEDS_CLASS
 367         depends on MFD_WM831X
 368         help
 369           This option enables support for the status LEDs of the WM831x
 370           series of PMICs.
 371
 372 config LEDS_WM8350
 373         tristate "LED Support for WM8350 AudioPlus PMIC"
 374         depends on LEDS_CLASS
 375         depends on MFD_WM8350
 376         help
 377           This option enables support for LEDs driven by the Wolfson
 378           Microelectronics WM8350 AudioPlus PMIC.
 379
 380 config LEDS_DA903X
 381         tristate "LED Support for DA9030/DA9034 PMIC"
 382         depends on LEDS_CLASS
 383         depends on PMIC_DA903X
 384         help
 385           This option enables support for on-chip LED drivers found
 386           on Dialog Semiconductor DA9030/DA9034 PMICs.
 387
 388 config LEDS_DA9052
 389         tristate "Dialog DA9052/DA9053 LEDS"
 390         depends on LEDS_CLASS
 391         depends on PMIC_DA9052
 392         help
 393           This option enables support for on-chip LED drivers found
 394           on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs.
 395
 396 config LEDS_DAC124S085
 397         tristate "LED Support for DAC124S085 SPI DAC"
 398         depends on LEDS_CLASS
 399         depends on SPI
 400         help
 401           This option enables support for DAC124S085 SPI DAC from NatSemi,
 402           which can be used to control up to four LEDs.
 403
 404 config LEDS_PWM
 405         tristate "PWM driven LED Support"
 406         depends on LEDS_CLASS
 407         depends on PWM
 408         help
 409           This option enables support for pwm driven LEDs
 410
 411 config LEDS_REGULATOR
 412         tristate "REGULATOR driven LED support"
 413         depends on LEDS_CLASS
 414         depends on REGULATOR
 415         help
 416           This option enables support for regulator driven LEDs.
 417
 418 config LEDS_BD2802
 419         tristate "LED driver for BD2802 RGB LED"
 420         depends on LEDS_CLASS
 421         depends on I2C
 422         help
 423           This option enables support for BD2802GU RGB LED driver chips
 424           accessed via the I2C bus.
 425
 426 config LEDS_INTEL_SS4200
 427         tristate "LED driver for Intel NAS SS4200 series"
 428         depends on LEDS_CLASS
 429         depends on PCI && DMI
 430         depends on X86
 431         help
 432           This option enables support for the Intel SS4200 series of
 433           Network Attached Storage servers. You may control the hard
 434           drive or power LEDs on the front panel. Using this driver
 435           can stop the front LED from blinking after startup.
 436
 437 config LEDS_LT3593
 438         tristate "LED driver for LT3593 controllers"
 439         depends on LEDS_CLASS
 440         depends on GPIOLIB || COMPILE_TEST
 441         help
 442           This option enables support for LEDs driven by a Linear Technology
 443           LT3593 controller. This controller uses a special one-wire pulse
 444           coding protocol to set the brightness.
 445
 446 config LEDS_ADP5520
 447         tristate "LED Support for ADP5520/ADP5501 PMIC"
 448         depends on LEDS_CLASS
 449         depends on PMIC_ADP5520
 450         help
 451           This option enables support for on-chip LED drivers found
 452           on Analog Devices ADP5520/ADP5501 PMICs.
 453
 454           To compile this driver as a module, choose M here: the module will
 455           be called leds-adp5520.
 456
 457 config LEDS_DELL_NETBOOKS
 458         tristate "External LED on Dell Business Netbooks"
 459         depends on LEDS_CLASS
 460         depends on X86 && ACPI_WMI
 461         depends on DELL_SMBIOS
 462         help
 463           This adds support for the Latitude 2100 and similar
 464           notebooks that have an external LED.
 465
 466 config LEDS_MC13783
 467         tristate "LED Support for MC13XXX PMIC"
 468         depends on LEDS_CLASS
 469         depends on MFD_MC13XXX
 470         help
 471           This option enable support for on-chip LED drivers found
 472           on Freescale Semiconductor MC13783/MC13892/MC34708 PMIC.
 473
 474 config LEDS_NS2
 475         tristate "LED support for Network Space v2 GPIO LEDs"
 476         depends on LEDS_CLASS
 477         depends on MACH_KIRKWOOD || MACH_ARMADA_370
 478         default y
 479         help
 480           This option enables support for the dual-GPIO LEDs found on the
 481           following LaCie/Seagate boards:
 482
 483                 Network Space v2 (and parents: Max, Mini)
 484                 Internet Space v2
 485                 d2 Network v2
 486                 n090401 (Seagate NAS 4-Bay)
 487
 488 config LEDS_NETXBIG
 489         tristate "LED support for Big Network series LEDs"
 490         depends on LEDS_CLASS
 491         depends on MACH_KIRKWOOD
 492         default y
 493         help
 494           This option enable support for LEDs found on the LaCie 2Big
 495           and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
 496           controlled through a GPIO extension bus.
 497
 498 config LEDS_ASIC3
 499         bool "LED support for the HTC ASIC3"
 500         depends on LEDS_CLASS=y
 501         depends on MFD_ASIC3
 502         default y
 503         help
 504           This option enables support for the LEDs on the HTC ASIC3. The HTC
 505           ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
 506           cannot be used. This driver supports hardware blinking with an on+off
 507           period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
 508
 509 config LEDS_TCA6507
 510         tristate "LED Support for TCA6507 I2C chip"
 511         depends on LEDS_CLASS && I2C
 512         help
 513           This option enables support for LEDs connected to TC6507
 514           LED driver chips accessed via the I2C bus.
 515           Driver support brightness control and hardware-assisted blinking.
 516
 517 config LEDS_TLC591XX
 518         tristate "LED driver for TLC59108 and TLC59116 controllers"
 519         depends on LEDS_CLASS && I2C
 520         select REGMAP_I2C
 521         help
 522           This option enables support for Texas Instruments TLC59108
 523           and TLC59116 LED controllers.
 524
 525 config LEDS_MAX77693
 526         tristate "LED support for MAX77693 Flash"
 527         depends on LEDS_CLASS_FLASH
 528         depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
 529         depends on MFD_MAX77693
 530         depends on OF
 531         help
 532           This option enables support for the flash part of the MAX77693
 533           multifunction device. It has build in control for two leds in flash
 534           and torch mode.
 535
 536 config LEDS_MAX8997
 537         tristate "LED support for MAX8997 PMIC"
 538         depends on LEDS_CLASS && MFD_MAX8997
 539         help
 540           This option enables support for on-chip LED drivers on
 541           MAXIM MAX8997 PMIC.
 542
 543 config LEDS_LM355x
 544         tristate "LED support for LM355x Chips, LM3554 and LM3556"
 545         depends on LEDS_CLASS && I2C
 546         select REGMAP_I2C
 547         help
 548           This option enables support for LEDs connected to LM355x.
 549           LM355x includes Torch, Flash and Indicator functions.
 550
 551 config LEDS_OT200
 552         tristate "LED support for the Bachmann OT200"
 553         depends on LEDS_CLASS && HAS_IOMEM && (X86_32 || COMPILE_TEST)
 554         help
 555           This option enables support for the LEDs on the Bachmann OT200.
 556           Say Y to enable LEDs on the Bachmann OT200.
 557
 558 config LEDS_MENF21BMC
 559         tristate "LED support for the MEN 14F021P00 BMC"
 560         depends on LEDS_CLASS && MFD_MENF21BMC
 561         help
 562           Say Y here to include support for the MEN 14F021P00 BMC LEDs.
 563
 564           This driver can also be built as a module. If so the module
 565           will be called leds-menf21bmc.
 566
 567 config LEDS_KTD2692
 568         tristate "LED support for KTD2692 flash LED controller"
 569         depends on LEDS_CLASS_FLASH && OF
 570         depends on GPIOLIB || COMPILE_TEST
 571         help
 572           This option enables support for KTD2692 LED flash connected
 573           through ExpressWire interface.
 574
 575           Say Y to enable this driver.
 576
 577 config LEDS_SEAD3
 578         tristate "LED support for the MIPS SEAD 3 board"
 579         depends on LEDS_CLASS && MIPS_SEAD3
 580         help
 581           Say Y here to include support for the FLED and PLED LEDs on SEAD3 eval
 582           boards.
 583
 584           This driver can also be built as a module. If so the module
 585           will be called leds-sead3.
 586
 587 config LEDS_IS31FL319X
 588         tristate "LED Support for ISSI IS31FL319x I2C LED controller family"
 589         depends on LEDS_CLASS && I2C && OF
 590         select REGMAP_I2C
 591         help
 592           This option enables support for LEDs connected to ISSI IS31FL319x
 593           fancy LED driver chips accessed via the I2C bus.
 594           Driver supports individual PWM brightness control for each channel.
 595
 596           This driver can also be built as a module. If so the module will be
 597           called leds-is31fl319x.
 598
 599 config LEDS_IS31FL32XX
 600         tristate "LED support for ISSI IS31FL32XX I2C LED controller family"
 601         depends on LEDS_CLASS && I2C && OF
 602         help
 603           Say Y here to include support for ISSI IS31FL32XX and Si-En SN32xx
 604           LED controllers. They are I2C devices with multiple constant-current
 605           channels, each with independent 256-level PWM control.
 606
 607 comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
 608
 609 config LEDS_BLINKM
 610         tristate "LED support for the BlinkM I2C RGB LED"
 611         depends on LEDS_CLASS
 612         depends on I2C
 613         help
 614           This option enables support for the BlinkM RGB LED connected
 615           through I2C. Say Y to enable support for the BlinkM LED.
 616
 617 config LEDS_POWERNV
 618         tristate "LED support for PowerNV Platform"
 619         depends on LEDS_CLASS
 620         depends on PPC_POWERNV
 621         depends on OF
 622         help
 623           This option enables support for the system LEDs present on
 624           PowerNV platforms. Say 'y' to enable this support in kernel.
 625           To compile this driver as a module, choose 'm' here: the module
 626           will be called leds-powernv.
 627
 628 config LEDS_SYSCON
 629         bool "LED support for LEDs on system controllers"
 630         depends on LEDS_CLASS=y
 631         depends on MFD_SYSCON
 632         depends on OF
 633         help
 634           This option enabled support for the LEDs on syscon type
 635           devices. This will only work with device tree enabled
 636           devices.
 637
 638 config LEDS_VERSATILE
 639         tristate "LED support for the ARM Versatile and RealView"
 640         depends on ARCH_REALVIEW || ARCH_VERSATILE
 641         depends on LEDS_CLASS
 642         help
 643           This option enabled support for the LEDs on the ARM Versatile
 644           and RealView boards. Say Y to enabled these.
 645
 646 config LEDS_PM8058
 647         tristate "LED Support for the Qualcomm PM8058 PMIC"
 648         depends on MFD_PM8921_CORE
 649         depends on LEDS_CLASS
 650         help
 651           Choose this option if you want to use the LED drivers in
 652           the Qualcomm PM8058 PMIC.
 653
 654 config LEDS_MLXCPLD
 655         tristate "LED support for the Mellanox boards"
 656         depends on X86_64 && DMI
 657         depends on LEDS_CLASS
 658         help
 659           This option enabled support for the LEDs on the Mellanox
 660           boards. Say Y to enabled these.
 661
 662 config LEDS_USER
 663         tristate "Userspace LED support"
 664         depends on LEDS_CLASS
 665         help
 666           This option enables support for userspace LEDs. Say 'y' to enable this
 667           support in kernel. To compile this driver as a module, choose 'm' here:
 668           the module will be called uleds.
 669
 670 comment "LED Triggers"
 671 source "drivers/leds/trigger/Kconfig"
 672
 673 endif # NEW_LEDS