1 config LEDS_GPIO_REGISTER
4 This option provides the function gpio_led_register_device.
5 As this function is used by arch code it must not be compiled as a
11 Say Y to enable Linux LED support. This allows control of supported
12 LEDs from both userspace and optionally, by kernel events (triggers).
14 This is not related to standard keyboard LEDs which are controlled
20 tristate "LED Class Support"
22 This option enables the led sysfs class in /sys/class/leds. You'll
23 need this to do anything useful with LEDs. If unsure, say N.
28 tristate "LED Support for Marvell 88PM860x PMIC"
30 depends on MFD_88PM860X
32 This option enables support for on-chip LED drivers found on Marvell
33 Semiconductor 88PM8606 PMIC.
36 tristate "LED Support using Atmel PWM outputs"
40 This option enables support for LEDs driven using outputs
41 of the dedicated PWM controller found on newer Atmel SOCs.
44 tristate "LCD Backlight driver for LM3530"
48 This option enables support for the LCD backlight using
49 LM3530 ambient light sensor chip. This ALS chip can be
50 controlled manually or using PWM input or using ambient
54 tristate "LED Support for Locomo device"
56 depends on SHARP_LOCOMO
58 This option enables support for the LEDs on Sharp Locomo.
59 Zaurus models SL-5500 and SL-5600.
61 config LEDS_MIKROTIK_RB532
62 tristate "LED Support for Mikrotik Routerboard 532"
64 depends on MIKROTIK_RB532
66 This option enables support for the so called "User LED" of
67 Mikrotik's Routerboard 532.
70 tristate "LED Support for Samsung S3C24XX GPIO LEDs"
72 depends on ARCH_S3C24XX
74 This option enables support for LEDs connected to GPIO lines
75 on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
78 tristate "LED Support for Soekris net48xx series Error LED"
80 depends on SCx200_GPIO
82 This option enables support for the Soekris net4801 and net4826 error
86 tristate "LED Support for the Freecom FSG-3"
90 This option enables support for the LEDs on the Freecom FSG-3.
93 tristate "LED Support for the WRAP series LEDs"
95 depends on SCx200_GPIO
97 This option enables support for the PCEngines WRAP programmable LEDs.
99 config LEDS_COBALT_QUBE
100 tristate "LED Support for the Cobalt Qube series front LED"
101 depends on LEDS_CLASS
102 depends on MIPS_COBALT
104 This option enables support for the front LED on Cobalt Qube series
106 config LEDS_COBALT_RAQ
107 bool "LED Support for the Cobalt Raq series"
108 depends on LEDS_CLASS=y && MIPS_COBALT
111 This option enables support for the Cobalt Raq series LEDs.
114 tristate "LED support for SunFire servers."
115 depends on LEDS_CLASS
119 This option enables support for the Left, Middle, and Right
120 LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
123 tristate "LED Support for the HP Jornada 6xx"
124 depends on LEDS_CLASS
127 This option enables LED support for the handheld
128 HP Jornada 620/660/680/690.
131 tristate "LED driver for PCA9532 dimmer"
132 depends on LEDS_CLASS
133 depends on I2C && INPUT && EXPERIMENTAL
135 This option enables support for NXP pca9532
136 LED controller. It is generally only useful
139 config LEDS_PCA9532_GPIO
140 bool "Enable GPIO support for PCA9532"
141 depends on LEDS_PCA9532
144 Allow unused pins on PCA9532 to be used as gpio.
146 To use a pin as gpio pca9532_type in pca9532_platform data needs to
147 set to PCA9532_TYPE_GPIO.
150 tristate "LED Support for GPIO connected LEDs"
151 depends on LEDS_CLASS
152 depends on GENERIC_GPIO
154 This option enables support for the LEDs connected to GPIO
155 outputs. To be useful the particular board must have LEDs
156 and they must be connected to the GPIO lines. The LEDs must be
157 defined as platform devices and/or OpenFirmware platform devices.
158 The code to use these bindings can be selected below.
161 tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
162 depends on LEDS_CLASS
165 This option enables support for LEDs connected to the National
166 Semiconductor LP3944 Lighting Management Unit (LMU) also known as
169 To compile this driver as a module, choose M here: the
170 module will be called leds-lp3944.
173 tristate "LED Support for N.S. LP5521 LED driver chip"
174 depends on LEDS_CLASS && I2C
176 If you say yes here you get support for the National Semiconductor
177 LP5521 LED driver. It is 3 channel chip with programmable engines.
178 Driver provides direct control via LED class and interface for
179 programming the engines.
182 tristate "LED Support for N.S. LP5523 LED driver chip"
183 depends on LEDS_CLASS && I2C
185 If you say yes here you get support for the National Semiconductor
186 LP5523 LED driver. It is 9 channel chip with programmable engines.
187 Driver provides direct control via LED class and interface for
188 programming the engines.
190 config LEDS_CLEVO_MAIL
191 tristate "Mail LED on Clevo notebook"
192 depends on LEDS_CLASS
193 depends on X86 && SERIO_I8042 && DMI
195 This driver makes the mail LED accessible from userspace
196 programs through the leds subsystem. This LED have three
197 known mode: off, blink at 0.5Hz and blink at 1Hz.
199 The driver supports two kinds of interface: using ledtrig-timer
200 or through /sys/class/leds/clevo::mail/brightness. As this LED
201 cannot change it's brightness it blinks instead. The brightness
202 value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means
205 This module can drive the mail LED for the following notebooks:
210 Clevo D400V/D470V (not tested, but might work)
212 Clevo M5x0N (not tested, but might work)
213 Positivo Mobile (Clevo M5x0V)
215 If your model is not listed here you can try the "nodetect"
218 To compile this driver as a module, choose M here: the
219 module will be called leds-clevo-mail.
222 tristate "LED Support for PCA955x I2C chips"
223 depends on LEDS_CLASS
226 This option enables support for LEDs connected to PCA955x
227 LED driver chips accessed via the I2C bus. Supported
228 devices include PCA9550, PCA9551, PCA9552, and PCA9553.
231 tristate "LED support for PCA9633 I2C chip"
232 depends on LEDS_CLASS
235 This option enables support for LEDs connected to the PCA9633
236 LED driver chip accessed via the I2C bus.
238 config LEDS_WM831X_STATUS
239 tristate "LED support for status LEDs on WM831x PMICs"
240 depends on LEDS_CLASS
241 depends on MFD_WM831X
243 This option enables support for the status LEDs of the WM831x
247 tristate "LED Support for WM8350 AudioPlus PMIC"
248 depends on LEDS_CLASS
249 depends on MFD_WM8350
251 This option enables support for LEDs driven by the Wolfson
252 Microelectronics WM8350 AudioPlus PMIC.
255 tristate "LED Support for DA9030/DA9034 PMIC"
256 depends on LEDS_CLASS
257 depends on PMIC_DA903X
259 This option enables support for on-chip LED drivers found
260 on Dialog Semiconductor DA9030/DA9034 PMICs.
263 tristate "Dialog DA9052/DA9053 LEDS"
264 depends on LEDS_CLASS
265 depends on PMIC_DA9052
267 This option enables support for on-chip LED drivers found
268 on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs.
270 config LEDS_DAC124S085
271 tristate "LED Support for DAC124S085 SPI DAC"
272 depends on LEDS_CLASS
275 This option enables support for DAC124S085 SPI DAC from NatSemi,
276 which can be used to control up to four LEDs.
279 tristate "PWM driven LED Support"
280 depends on LEDS_CLASS
283 This option enables support for pwm driven LEDs
285 config LEDS_REGULATOR
286 tristate "REGULATOR driven LED support"
287 depends on LEDS_CLASS
290 This option enables support for regulator driven LEDs.
293 tristate "LED driver for BD2802 RGB LED"
294 depends on LEDS_CLASS
297 This option enables support for BD2802GU RGB LED driver chips
298 accessed via the I2C bus.
300 config LEDS_INTEL_SS4200
301 tristate "LED driver for Intel NAS SS4200 series"
302 depends on LEDS_CLASS
303 depends on PCI && DMI
305 This option enables support for the Intel SS4200 series of
306 Network Attached Storage servers. You may control the hard
307 drive or power LEDs on the front panel. Using this driver
308 can stop the front LED from blinking after startup.
311 tristate "LED driver for LT3593 controllers"
312 depends on LEDS_CLASS
313 depends on GENERIC_GPIO
315 This option enables support for LEDs driven by a Linear Technology
316 LT3593 controller. This controller uses a special one-wire pulse
317 coding protocol to set the brightness.
320 tristate "LED Support for ADP5520/ADP5501 PMIC"
321 depends on LEDS_CLASS
322 depends on PMIC_ADP5520
324 This option enables support for on-chip LED drivers found
325 on Analog Devices ADP5520/ADP5501 PMICs.
327 To compile this driver as a module, choose M here: the module will
328 be called leds-adp5520.
330 config LEDS_DELL_NETBOOKS
331 tristate "External LED on Dell Business Netbooks"
332 depends on LEDS_CLASS
333 depends on X86 && ACPI_WMI
335 This adds support for the Latitude 2100 and similar
336 notebooks that have an external LED.
339 tristate "LED Support for MC13783 PMIC"
340 depends on LEDS_CLASS
341 depends on MFD_MC13783
343 This option enable support for on-chip LED drivers found
344 on Freescale Semiconductor MC13783 PMIC.
347 tristate "LED support for Network Space v2 GPIO LEDs"
348 depends on LEDS_CLASS
349 depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || \
350 MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2
353 This option enable support for the dual-GPIO LED found on the
354 Network Space v2 board (and parents). This include Internet Space v2,
355 Network Space (Max) v2 and d2 Network v2 boards.
358 tristate "LED support for Big Network series LEDs"
359 depends on MACH_NET2BIG_V2 || MACH_NET5BIG_V2
360 depends on LEDS_CLASS
363 This option enable support for LEDs found on the LaCie 2Big
364 and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
365 controlled through a GPIO extension bus.
368 bool "LED support for the HTC ASIC3"
369 depends on LEDS_CLASS
373 This option enables support for the LEDs on the HTC ASIC3. The HTC
374 ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
375 cannot be used. This driver supports hardware blinking with an on+off
376 period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
378 config LEDS_RENESAS_TPU
379 bool "LED support for Renesas TPU"
380 depends on LEDS_CLASS && HAVE_CLK && GENERIC_GPIO
382 This option enables build of the LED TPU platform driver,
383 suitable to drive any TPU channel on newer Renesas SoCs.
384 The driver controls the GPIO pin connected to the LED via
385 the GPIO framework and expects the LED to be connected to
386 a pin that can be driven in both GPIO mode and using TPU
387 pin function. The latter to support brightness control.
388 Brightness control is supported but hardware blinking is not.
391 tristate "LED Support for TCA6507 I2C chip"
392 depends on LEDS_CLASS && I2C
394 This option enables support for LEDs connected to TC6507
395 LED driver chips accessed via the I2C bus.
396 Driver support brightness control and hardware-assisted blinking.
399 tristate "LED support for MAX8997 PMIC"
400 depends on LEDS_CLASS && MFD_MAX8997
402 This option enables support for on-chip LED drivers on
406 tristate "LED support for the Bachmann OT200"
407 depends on LEDS_CLASS && HAS_IOMEM
409 This option enables support for the LEDs on the Bachmann OT200.
410 Say Y to enable LEDs on the Bachmann OT200.
413 bool "LED Trigger support"
414 depends on LEDS_CLASS
416 This option enables trigger support for the leds class.
417 These triggers allow kernel events to drive the LEDs and can
418 be configured via sysfs. If unsure, say Y.
420 comment "LED Triggers"
422 config LEDS_TRIGGER_TIMER
423 tristate "LED Timer Trigger"
424 depends on LEDS_TRIGGERS
426 This allows LEDs to be controlled by a programmable timer
427 via sysfs. Some LED hardware can be programmed to start
428 blinking the LED without any further software interaction.
429 For more details read Documentation/leds/leds-class.txt.
433 config LEDS_TRIGGER_IDE_DISK
434 bool "LED IDE Disk Trigger"
435 depends on IDE_GD_ATA
436 depends on LEDS_TRIGGERS
438 This allows LEDs to be controlled by IDE disk activity.
441 config LEDS_TRIGGER_HEARTBEAT
442 tristate "LED Heartbeat Trigger"
443 depends on LEDS_TRIGGERS
445 This allows LEDs to be controlled by a CPU load average.
446 The flash frequency is a hyperbolic function of the 1-minute
450 config LEDS_TRIGGER_BACKLIGHT
451 tristate "LED backlight Trigger"
452 depends on LEDS_TRIGGERS
454 This allows LEDs to be controlled as a backlight device: they
455 turn off and on when the display is blanked and unblanked.
459 config LEDS_TRIGGER_GPIO
460 tristate "LED GPIO Trigger"
461 depends on LEDS_TRIGGERS
464 This allows LEDs to be controlled by gpio events. It's good
465 when using gpios as switches and triggering the needed LEDs
466 from there. One use case is n810's keypad LEDs that could
467 be triggered by this trigger when user slides up to show
472 config LEDS_TRIGGER_DEFAULT_ON
473 tristate "LED Default ON Trigger"
474 depends on LEDS_TRIGGERS
476 This allows LEDs to be initialised in the ON state.
479 comment "iptables trigger is under Netfilter config (LED target)"
480 depends on LEDS_TRIGGERS