drivers/leds/leds-atmel-pwm.c

   1 #include <linux/kernel.h>
   2 #include <linux/platform_device.h>
   3 #include <linux/leds.h>
   4 #include <linux/io.h>
   5 #include <linux/atmel_pwm.h>
   6 #include <linux/slab.h>
   7 #include <linux/module.h>
   8
   9
  10 struct pwmled {
  11         struct led_classdev     cdev;
  12         struct pwm_channel      pwmc;
  13         struct gpio_led         *desc;
  14         u32                     mult;
  15         u8                      active_low;
  16 };
  17
  18
  19 /*
  20  * For simplicity, we use "brightness" as if it were a linear function
  21  * of PWM duty cycle.  However, a logarithmic function of duty cycle is
  22  * probably a better match for perceived brightness: two is half as bright
  23  * as four, four is half as bright as eight, etc
  24  */
  25 static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b)
  26 {
  27         struct pwmled            *led;
  28
  29         /* update the duty cycle for the *next* period */
  30         led = container_of(cdev, struct pwmled, cdev);
  31         pwm_channel_writel(&led->pwmc, PWM_CUPD, led->mult * (unsigned) b);
  32 }
  33
  34 /*
  35  * NOTE:  we reuse the platform_data structure of GPIO leds,
  36  * but repurpose its "gpio" number as a PWM channel number.
  37  */
  38 static int __init pwmled_probe(struct platform_device *pdev)
  39 {
  40         const struct gpio_led_platform_data     *pdata;
  41         struct pwmled                           *leds;
  42         int                                     i;
  43         int                                     status;
  44
  45         pdata = pdev->dev.platform_data;
  46         if (!pdata || pdata->num_leds < 1)
  47                 return -ENODEV;
  48
  49         leds = kcalloc(pdata->num_leds, sizeof(*leds), GFP_KERNEL);
  50         if (!leds)
  51                 return -ENOMEM;
  52
  53         for (i = 0; i < pdata->num_leds; i++) {
  54                 struct pwmled           *led = leds + i;
  55                 const struct gpio_led   *dat = pdata->leds + i;
  56                 u32                     tmp;
  57
  58                 led->cdev.name = dat->name;
  59                 led->cdev.brightness = LED_OFF;
  60                 led->cdev.brightness_set = pwmled_brightness;
  61                 led->cdev.default_trigger = dat->default_trigger;
  62
  63                 led->active_low = dat->active_low;
  64
  65                 status = pwm_channel_alloc(dat->gpio, &led->pwmc);
  66                 if (status < 0)
  67                         goto err;
  68
  69                 /*
  70                  * Prescale clock by 2^x, so PWM counts in low MHz.
  71                  * Start each cycle with the LED active, so increasing
  72                  * the duty cycle gives us more time on (== brighter).
  73                  */
  74                 tmp = 5;
  75                 if (!led->active_low)
  76                         tmp |= PWM_CPR_CPOL;
  77                 pwm_channel_writel(&led->pwmc, PWM_CMR, tmp);
  78
  79                 /*
  80                  * Pick a period so PWM cycles at 100+ Hz; and a multiplier
  81                  * for scaling duty cycle:  brightness * mult.
  82                  */
  83                 tmp = (led->pwmc.mck / (1 << 5)) / 100;
  84                 tmp /= 255;
  85                 led->mult = tmp;
  86                 pwm_channel_writel(&led->pwmc, PWM_CDTY,
  87                                 led->cdev.brightness * 255);
  88                 pwm_channel_writel(&led->pwmc, PWM_CPRD,
  89                                 LED_FULL * tmp);
  90
  91                 pwm_channel_enable(&led->pwmc);
  92
  93                 /* Hand it over to the LED framework */
  94                 status = led_classdev_register(&pdev->dev, &led->cdev);
  95                 if (status < 0) {
  96                         pwm_channel_free(&led->pwmc);
  97                         goto err;
  98                 }
  99         }
 100
 101         platform_set_drvdata(pdev, leds);
 102         return 0;
 103
 104 err:
 105         if (i > 0) {
 106                 for (i = i - 1; i >= 0; i--) {
 107                         led_classdev_unregister(&leds[i].cdev);
 108                         pwm_channel_free(&leds[i].pwmc);
 109                 }
 110         }
 111         kfree(leds);
 112
 113         return status;
 114 }
 115
 116 static int __exit pwmled_remove(struct platform_device *pdev)
 117 {
 118         const struct gpio_led_platform_data     *pdata;
 119         struct pwmled                           *leds;
 120         unsigned                                i;
 121
 122         pdata = pdev->dev.platform_data;
 123         leds = platform_get_drvdata(pdev);
 124
 125         for (i = 0; i < pdata->num_leds; i++) {
 126                 struct pwmled           *led = leds + i;
 127
 128                 led_classdev_unregister(&led->cdev);
 129                 pwm_channel_free(&led->pwmc);
 130         }
 131
 132         kfree(leds);
 133         platform_set_drvdata(pdev, NULL);
 134         return 0;
 135 }
 136
 137 /* work with hotplug and coldplug */
 138 MODULE_ALIAS("platform:leds-atmel-pwm");
 139
 140 static struct platform_driver pwmled_driver = {
 141         .driver = {
 142                 .name =         "leds-atmel-pwm",
 143                 .owner =        THIS_MODULE,
 144         },
 145         /* REVISIT add suspend() and resume() methods */
 146         .remove =       __exit_p(pwmled_remove),
 147 };
 148
 149 static int __init modinit(void)
 150 {
 151         return platform_driver_probe(&pwmled_driver, pwmled_probe);
 152 }
 153 module_init(modinit);
 154
 155 static void __exit modexit(void)
 156 {
 157         platform_driver_unregister(&pwmled_driver);
 158 }
 159 module_exit(modexit);
 160
 161 MODULE_DESCRIPTION("Driver for LEDs with PWM-controlled brightness");
 162 MODULE_LICENSE("GPL");