drivers/macintosh/Kconfig

   1
   2 menu "Macintosh device drivers"
   3         depends on PPC || MAC
   4
   5 config ADB
   6         bool "Apple Desktop Bus (ADB) support"
   7         depends on MAC || (PPC_PMAC && PPC32)
   8         help
   9           Apple Desktop Bus (ADB) support is for support of devices which
  10           are connected to an ADB port.  ADB devices tend to have 4 pins.
  11           If you have an Apple Macintosh prior to the iMac, an iBook or
  12           PowerBook, or a "Blue and White G3", you probably want to say Y
  13           here.  Otherwise say N.
  14
  15 config ADB_MACII
  16         bool "Include Mac II ADB driver"
  17         depends on ADB && MAC
  18         help
  19           Say Y here if want your kernel to support Macintosh systems that use
  20           the Mac II style ADB.  This includes the II, IIx, IIcx, SE/30, IIci,
  21           Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
  22           Centris 650.
  23
  24 config ADB_MACIISI
  25         bool "Include Mac IIsi ADB driver"
  26         depends on ADB && MAC
  27         help
  28           Say Y here if want your kernel to support Macintosh systems that use
  29           the Mac IIsi style ADB.  This includes the IIsi, IIvi, IIvx, Classic
  30           II, LC, LC II, LC III, Performa 460, and the Performa 600.
  31
  32 config ADB_IOP
  33         bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
  34         depends on ADB && MAC
  35         help
  36           The I/O Processor (IOP) is an Apple custom IC designed to provide
  37           intelligent support for I/O controllers.  It is described at
  38           <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
  39           support for it, say 'Y' here.
  40
  41 config ADB_PMU68K
  42         bool "Include PMU (Powerbook) ADB driver"
  43         depends on ADB && MAC
  44         help
  45           Say Y here if want your kernel to support the m68k based Powerbooks.
  46           This includes the PowerBook 140, PowerBook 145, PowerBook 150,
  47           PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
  48           PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
  49           PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
  50           PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
  51
  52 # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
  53 config ADB_CUDA
  54         bool "Support for CUDA based Macs and PowerMacs"
  55         depends on (ADB || PPC_PMAC) && !PPC_PMAC64
  56         help
  57           This provides support for CUDA based Macintosh and Power Macintosh
  58           systems.  This includes many m68k based Macs (Color Classic, Mac TV,
  59           Performa 475, Performa 520, Performa 550, Performa 575,
  60           Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
  61           Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
  62           the Blue&White G3 and the "Yikes" G4 (PCI Graphics).  All later
  63           models should use CONFIG_ADB_PMU instead.  It is safe to say Y here
  64           even if your machine doesn't have a CUDA.
  65
  66           If unsure say Y.
  67
  68 config ADB_PMU
  69         bool "Support for PMU  based PowerMacs"
  70         depends on PPC_PMAC
  71         help
  72           On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
  73           PMU is an embedded microprocessor whose primary function is to
  74           control system power, and battery charging on the portable models.
  75           The PMU also controls the ADB (Apple Desktop Bus) which connects to
  76           the keyboard and mouse on some machines, as well as the non-volatile
  77           RAM and the RTC (real time clock) chip.  Say Y to enable support for
  78           this device; you should do so if your machine is one of those
  79           mentioned above.
  80
  81 config ADB_PMU_LED
  82         bool "Support for the Power/iBook front LED"
  83         depends on ADB_PMU
  84         select NEW_LEDS
  85         select LEDS_CLASS
  86         help
  87           Support the front LED on Power/iBooks as a generic LED that can
  88           be triggered by any of the supported triggers. To get the
  89           behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
  90           and the ide-disk LED trigger and configure appropriately through
  91           sysfs.
  92
  93 config ADB_PMU_LED_IDE
  94         bool "Use front LED as IDE LED by default"
  95         depends on ADB_PMU_LED
  96         select LEDS_TRIGGERS
  97         select LEDS_TRIGGER_IDE_DISK
  98         help
  99           This option makes the front LED default to the IDE trigger
 100           so that it blinks on IDE activity.
 101
 102 config PMAC_SMU
 103         bool "Support for SMU  based PowerMacs"
 104         depends on PPC_PMAC64
 105         help
 106           This option adds support for the newer G5 iMacs and PowerMacs based
 107           on the "SMU" system control chip which replaces the old PMU.
 108           If you don't know, say Y.
 109
 110 config PMAC_APM_EMU
 111         tristate "APM emulation"
 112         depends on PPC_PMAC && PPC32 && PM && ADB_PMU
 113
 114 config PMAC_MEDIABAY
 115         bool "Support PowerBook hotswap media bay"
 116         depends on PPC_PMAC && PPC32
 117         help
 118           This option adds support for older PowerBook's hotswap media bay
 119           that can contains batteries, floppy drives, or IDE devices. PCI
 120           devices are not fully supported in the bay as I never had one to
 121           try with
 122
 123 config PMAC_BACKLIGHT
 124         bool "Backlight control for LCD screens"
 125         depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
 126         select FB_BACKLIGHT
 127         help
 128           Say Y here to enable Macintosh specific extensions of the generic
 129           backlight code. With this enabled, the brightness keys on older
 130           PowerBooks will be enabled so you can change the screen brightness.
 131           Newer models should use an userspace daemon like pbbuttonsd.
 132
 133 config PMAC_BACKLIGHT_LEGACY
 134         bool "Provide legacy ioctl's on /dev/pmu for the backlight"
 135         depends on PMAC_BACKLIGHT && (BROKEN || !PPC64)
 136         help
 137           Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for
 138           programs which use this old interface. New and updated programs
 139           should use the backlight classes in sysfs.
 140
 141 config ADB_MACIO
 142         bool "Include MacIO (CHRP) ADB driver"
 143         depends on ADB && PPC_CHRP && !PPC_PMAC64
 144         help
 145           Say Y here to include direct support for the ADB controller in the
 146           Hydra chip used on PowerPC Macintoshes of the CHRP type.  (The Hydra
 147           also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
 148           OpenPIC controller and two RS422/Geoports.)
 149
 150 config INPUT_ADBHID
 151         bool "Support for ADB input devices (keyboard, mice, ...)"
 152         depends on ADB && INPUT=y
 153         help
 154           Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
 155           such as keyboards, mice, joysticks, trackpads  or graphic tablets
 156           handled by the input layer.  If you say Y here, make sure to say Y to
 157           the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
 158           "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
 159           support" (CONFIG_INPUT_EVDEV) as well.
 160
 161           If unsure, say Y.
 162
 163 config MAC_EMUMOUSEBTN
 164         bool "Support for mouse button 2+3 emulation"
 165         depends on INPUT_ADBHID
 166         help
 167           This provides generic support for emulating the 2nd and 3rd mouse
 168           button with keypresses.  If you say Y here, the emulation is still
 169           disabled by default.  The emulation is controlled by these sysctl
 170           entries:
 171           /proc/sys/dev/mac_hid/mouse_button_emulation
 172           /proc/sys/dev/mac_hid/mouse_button2_keycode
 173           /proc/sys/dev/mac_hid/mouse_button3_keycode
 174
 175           If you have an Apple machine with a 1-button mouse, say Y here.
 176
 177 config THERM_WINDTUNNEL
 178         tristate "Support for thermal management on Windtunnel G4s"
 179         depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 180         help
 181           This driver provides some thermostat and fan control for the desktop
 182           G4 "Windtunnel"
 183
 184 config THERM_ADT746X
 185         tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
 186         depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 187         help
 188           This driver provides some thermostat and fan control for the
 189           iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
 190           better fan behaviour by default, and some manual control.
 191
 192 config THERM_PM72
 193         tristate "Support for thermal management on PowerMac G5"
 194         depends on I2C && I2C_POWERMAC && PPC_PMAC64
 195         help
 196           This driver provides thermostat and fan control for the desktop
 197           G5 machines.
 198
 199 config WINDFARM
 200         tristate "New PowerMac thermal control infrastructure"
 201         depends on PPC
 202
 203 config WINDFARM_PM81
 204         tristate "Support for thermal management on iMac G5"
 205         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
 206         select I2C_POWERMAC
 207         help
 208           This driver provides thermal control for the iMacG5
 209
 210 config WINDFARM_PM91
 211         tristate "Support for thermal management on PowerMac9,1"
 212         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
 213         select I2C_POWERMAC
 214         help
 215           This driver provides thermal control for the PowerMac9,1
 216           which is the recent (SMU based) single CPU desktop G5
 217
 218 config WINDFARM_PM112
 219         tristate "Support for thermal management on PowerMac11,2"
 220         depends on WINDFARM && I2C && PMAC_SMU
 221         select I2C_POWERMAC
 222         help
 223           This driver provides thermal control for the PowerMac11,2
 224           which are the recent dual and quad G5 machines using the
 225           970MP dual-core processor.
 226
 227 config ANSLCD
 228         tristate "Support for ANS LCD display"
 229         depends on ADB_CUDA && PPC_PMAC
 230
 231 endmenu