drivers/macintosh/Kconfig

   1
   2 menuconfig MACINTOSH_DRIVERS
   3         bool "Macintosh device drivers"
   4         depends on PPC || MAC || X86
   5         default y if (PPC_PMAC || MAC)
   6         ---help---
   7           Say Y here to get to see options for devices used with Macintosh
   8           computers. This option alone does not add any kernel code.
   9
  10           If you say N, all options in this submenu will be skipped and disabled.
  11
  12 if MACINTOSH_DRIVERS
  13
  14 config ADB
  15         bool "Apple Desktop Bus (ADB) support"
  16         depends on MAC || (PPC_PMAC && PPC32)
  17         help
  18           Apple Desktop Bus (ADB) support is for support of devices which
  19           are connected to an ADB port.  ADB devices tend to have 4 pins.
  20           If you have an Apple Macintosh prior to the iMac, an iBook or
  21           PowerBook, or a "Blue and White G3", you probably want to say Y
  22           here.  Otherwise say N.
  23
  24 config ADB_MACII
  25         bool "Include Mac II ADB driver"
  26         depends on ADB && MAC
  27         help
  28           Say Y here if want your kernel to support Macintosh systems that use
  29           the Mac II style ADB.  This includes the II, IIx, IIcx, SE/30, IIci,
  30           Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and
  31           Centris 650.
  32
  33 config ADB_MACIISI
  34         bool "Include Mac IIsi ADB driver"
  35         depends on ADB && MAC && BROKEN
  36         help
  37           Say Y here if want your kernel to support Macintosh systems that use
  38           the Mac IIsi style ADB.  This includes the IIsi, IIvi, IIvx, Classic
  39           II, LC, LC II, LC III, Performa 460, and the Performa 600.
  40
  41 config ADB_IOP
  42         bool "Include IOP (IIfx/Quadra 9x0) ADB driver"
  43         depends on ADB && MAC
  44         help
  45           The I/O Processor (IOP) is an Apple custom IC designed to provide
  46           intelligent support for I/O controllers.  It is described at
  47           <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct
  48           support for it, say 'Y' here.
  49
  50 config ADB_PMU68K
  51         bool "Include PMU (Powerbook) ADB driver"
  52         depends on ADB && MAC
  53         help
  54           Say Y here if want your kernel to support the m68k based Powerbooks.
  55           This includes the PowerBook 140, PowerBook 145, PowerBook 150,
  56           PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170,
  57           PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520,
  58           PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250,
  59           PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.
  60
  61 # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU
  62 config ADB_CUDA
  63         bool "Support for CUDA based Macs and PowerMacs"
  64         depends on (ADB || PPC_PMAC) && !PPC_PMAC64
  65         help
  66           This provides support for CUDA based Macintosh and Power Macintosh
  67           systems.  This includes many m68k based Macs (Color Classic, Mac TV,
  68           Performa 475, Performa 520, Performa 550, Performa 575,
  69           Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and
  70           Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs,
  71           the Blue&White G3 and the "Yikes" G4 (PCI Graphics).  All later
  72           models should use CONFIG_ADB_PMU instead.  It is safe to say Y here
  73           even if your machine doesn't have a CUDA.
  74
  75           If unsure say Y.
  76
  77 config ADB_PMU
  78         bool "Support for PMU  based PowerMacs"
  79         depends on PPC_PMAC
  80         help
  81           On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the
  82           PMU is an embedded microprocessor whose primary function is to
  83           control system power, and battery charging on the portable models.
  84           The PMU also controls the ADB (Apple Desktop Bus) which connects to
  85           the keyboard and mouse on some machines, as well as the non-volatile
  86           RAM and the RTC (real time clock) chip.  Say Y to enable support for
  87           this device; you should do so if your machine is one of those
  88           mentioned above.
  89
  90 config ADB_PMU_LED
  91         bool "Support for the Power/iBook front LED"
  92         depends on ADB_PMU
  93         select NEW_LEDS
  94         select LEDS_CLASS
  95         help
  96           Support the front LED on Power/iBooks as a generic LED that can
  97           be triggered by any of the supported triggers. To get the
  98           behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this
  99           and the ide-disk LED trigger and configure appropriately through
 100           sysfs.
 101
 102 config ADB_PMU_LED_IDE
 103         bool "Use front LED as IDE LED by default"
 104         depends on ADB_PMU_LED
 105         depends on LEDS_CLASS
 106         depends on IDE_GD_ATA
 107         select LEDS_TRIGGERS
 108         select LEDS_TRIGGER_IDE_DISK
 109         help
 110           This option makes the front LED default to the IDE trigger
 111           so that it blinks on IDE activity.
 112
 113 config PMAC_SMU
 114         bool "Support for SMU  based PowerMacs"
 115         depends on PPC_PMAC64
 116         help
 117           This option adds support for the newer G5 iMacs and PowerMacs based
 118           on the "SMU" system control chip which replaces the old PMU.
 119           If you don't know, say Y.
 120
 121 config PMAC_APM_EMU
 122         tristate "APM emulation"
 123         select APM_EMULATION
 124         depends on ADB_PMU && PM && PPC32
 125
 126 config PMAC_MEDIABAY
 127         bool "Support PowerBook hotswap media bay"
 128         depends on PPC_PMAC && PPC32 && BLOCK
 129         help
 130           This option adds support for older PowerBook's hotswap media bay
 131           that can contains batteries, floppy drives, or IDE devices. PCI
 132           devices are not fully supported in the bay as I never had one to
 133           try with
 134
 135 config PMAC_BACKLIGHT
 136         bool "Backlight control for LCD screens"
 137         depends on ADB_PMU && FB = y && (BROKEN || !PPC64)
 138         select FB_BACKLIGHT
 139         help
 140           Say Y here to enable Macintosh specific extensions of the generic
 141           backlight code. With this enabled, the brightness keys on older
 142           PowerBooks will be enabled so you can change the screen brightness.
 143           Newer models should use a userspace daemon like pbbuttonsd.
 144
 145 config PMAC_BACKLIGHT_LEGACY
 146         bool "Provide legacy ioctl's on /dev/pmu for the backlight"
 147         depends on PMAC_BACKLIGHT && (BROKEN || !PPC64)
 148         help
 149           Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for
 150           programs which use this old interface. New and updated programs
 151           should use the backlight classes in sysfs.
 152
 153 config ADB_MACIO
 154         bool "Include MacIO (CHRP) ADB driver"
 155         depends on ADB && PPC_CHRP && !PPC_PMAC64
 156         help
 157           Say Y here to include direct support for the ADB controller in the
 158           Hydra chip used on PowerPC Macintoshes of the CHRP type.  (The Hydra
 159           also includes a MESH II SCSI controller, DBDMA controller, VIA chip,
 160           OpenPIC controller and two RS422/Geoports.)
 161
 162 config INPUT_ADBHID
 163         bool "Support for ADB input devices (keyboard, mice, ...)"
 164         depends on ADB && INPUT=y
 165         help
 166           Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
 167           such as keyboards, mice, joysticks, trackpads  or graphic tablets
 168           handled by the input layer.  If you say Y here, make sure to say Y to
 169           the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
 170           "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
 171           support" (CONFIG_INPUT_EVDEV) as well.
 172
 173           If unsure, say Y.
 174
 175 config MAC_EMUMOUSEBTN
 176         tristate "Support for mouse button 2+3 emulation"
 177         depends on SYSCTL && INPUT
 178         help
 179           This provides generic support for emulating the 2nd and 3rd mouse
 180           button with keypresses.  If you say Y here, the emulation is still
 181           disabled by default.  The emulation is controlled by these sysctl
 182           entries:
 183           /proc/sys/dev/mac_hid/mouse_button_emulation
 184           /proc/sys/dev/mac_hid/mouse_button2_keycode
 185           /proc/sys/dev/mac_hid/mouse_button3_keycode
 186
 187           If you have an Apple machine with a 1-button mouse, say Y here.
 188
 189           To compile this driver as a module, choose M here: the
 190           module will be called mac_hid.
 191
 192 config THERM_WINDTUNNEL
 193         tristate "Support for thermal management on Windtunnel G4s"
 194         depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 195         help
 196           This driver provides some thermostat and fan control for the desktop
 197           G4 "Windtunnel"
 198
 199 config THERM_ADT746X
 200         tristate "Support for thermal mgmnt on laptops with ADT 746x chipset"
 201         depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64
 202         help
 203           This driver provides some thermostat and fan control for the
 204           iBook G4, and the ATI based aluminium PowerBooks, allowing slightly
 205           better fan behaviour by default, and some manual control.
 206
 207 config THERM_PM72
 208         tristate "Support for thermal management on PowerMac G5 (AGP)"
 209         depends on I2C && I2C_POWERMAC && PPC_PMAC64
 210         default n
 211         help
 212           This driver provides thermostat and fan control for the desktop
 213           G5 machines.
 214
 215           This is deprecated, use windfarm instead.
 216
 217 config WINDFARM
 218         tristate "New PowerMac thermal control infrastructure"
 219         depends on PPC
 220
 221 config WINDFARM_PM81
 222         tristate "Support for thermal management on iMac G5"
 223         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
 224         select I2C_POWERMAC
 225         help
 226           This driver provides thermal control for the iMacG5
 227
 228 config WINDFARM_PM72
 229         tristate "Support for thermal management on PowerMac G5 (AGP)"
 230         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
 231         select I2C_POWERMAC
 232         help
 233           This driver provides thermal control for the PowerMac G5
 234           "AGP" variants (PowerMac 7,2 and 7,3)
 235
 236 config WINDFARM_RM31
 237         tristate "Support for thermal management on Xserve G5"
 238         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU
 239         select I2C_POWERMAC
 240         help
 241           This driver provides thermal control for the Xserve G5
 242           (RackMac3,1)
 243
 244 config WINDFARM_PM91
 245         tristate "Support for thermal management on PowerMac9,1"
 246         depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU
 247         select I2C_POWERMAC
 248         help
 249           This driver provides thermal control for the PowerMac9,1
 250           which is the recent (SMU based) single CPU desktop G5
 251
 252 config WINDFARM_PM112
 253         tristate "Support for thermal management on PowerMac11,2"
 254         depends on WINDFARM && I2C && PMAC_SMU
 255         select I2C_POWERMAC
 256         help
 257           This driver provides thermal control for the PowerMac11,2
 258           which are the recent dual and quad G5 machines using the
 259           970MP dual-core processor.
 260
 261 config WINDFARM_PM121
 262         tristate "Support for thermal management on PowerMac12,1"
 263         depends on WINDFARM && I2C && PMAC_SMU
 264         select I2C_POWERMAC
 265         help
 266           This driver provides thermal control for the PowerMac12,1
 267           which is the iMac G5 (iSight).
 268
 269 config ANSLCD
 270         tristate "Support for ANS LCD display"
 271         depends on ADB_CUDA && PPC_PMAC
 272
 273 config PMAC_RACKMETER
 274         tristate "Support for Apple XServe front panel LEDs"
 275         depends on PPC_PMAC
 276         help
 277           This driver provides some support to control the front panel
 278           blue LEDs "vu-meter" of the XServer macs.
 279
 280 config SENSORS_AMS
 281         tristate "Apple Motion Sensor driver"
 282         depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C)
 283         select INPUT_POLLDEV
 284         help
 285           Support for the motion sensor included in PowerBooks. Includes
 286           implementations for PMU and I2C.
 287
 288           This driver can also be built as a module. If so, the module
 289           will be called ams.
 290
 291 config SENSORS_AMS_PMU
 292         bool "PMU variant"
 293         depends on SENSORS_AMS && ADB_PMU
 294         default y
 295         help
 296           PMU variant of motion sensor, found in late 2005 PowerBooks.
 297
 298 config SENSORS_AMS_I2C
 299         bool "I2C variant"
 300         depends on SENSORS_AMS && I2C
 301         default y
 302         help
 303           I2C variant of motion sensor, found in early 2005 PowerBooks and
 304           iBooks.
 305
 306 endif # MACINTOSH_DRIVERS