2 * Windfarm PowerMac thermal control
4 * Copyright 2012 Benjamin Herrenschmidt, IBM Corp.
6 * Released under the term of the GNU GPL v2.
9 #ifndef __WINDFARM_MPU_H
10 #define __WINDFARM_MPU_H
12 typedef unsigned short fu16
;
16 /* Definition of the MPU data structure which contains per CPU
17 * calibration information (among others) for the G5 machines
21 u8 signature
; /* 0x00 - EEPROM sig. */
22 u8 bytes_used
; /* 0x01 - Bytes used in eeprom (160 ?) */
23 u8 size
; /* 0x02 - EEPROM size (256 ?) */
24 u8 version
; /* 0x03 - EEPROM version */
25 u32 data_revision
; /* 0x04 - Dataset revision */
26 u8 processor_bin_code
[3]; /* 0x08 - Processor BIN code */
27 u8 bin_code_expansion
; /* 0x0b - ??? (padding ?) */
28 u8 processor_num
; /* 0x0c - Number of CPUs on this MPU */
29 u8 input_mul_bus_div
; /* 0x0d - Clock input multiplier/bus divider */
30 u8 reserved1
[2]; /* 0x0e - */
31 u32 input_clk_freq_high
; /* 0x10 - Input clock frequency high */
32 u8 cpu_nb_target_cycles
; /* 0x14 - ??? */
33 u8 cpu_statlat
; /* 0x15 - ??? */
34 u8 cpu_snooplat
; /* 0x16 - ??? */
35 u8 cpu_snoopacc
; /* 0x17 - ??? */
36 u8 nb_paamwin
; /* 0x18 - ??? */
37 u8 nb_statlat
; /* 0x19 - ??? */
38 u8 nb_snooplat
; /* 0x1a - ??? */
39 u8 nb_snoopwin
; /* 0x1b - ??? */
40 u8 api_bus_mode
; /* 0x1c - ??? */
41 u8 reserved2
[3]; /* 0x1d - */
42 u32 input_clk_freq_low
; /* 0x20 - Input clock frequency low */
43 u8 processor_card_slot
; /* 0x24 - Processor card slot number */
44 u8 reserved3
[2]; /* 0x25 - */
45 u8 padjmax
; /* 0x27 - Max power adjustment (Not in OF!) */
46 u8 ttarget
; /* 0x28 - Target temperature */
47 u8 tmax
; /* 0x29 - Max temperature */
48 u8 pmaxh
; /* 0x2a - Max power */
49 u8 tguardband
; /* 0x2b - Guardband temp ??? Hist. len in OSX */
50 fs32 pid_gp
; /* 0x2c - PID proportional gain */
51 fs32 pid_gr
; /* 0x30 - PID reset gain */
52 fs32 pid_gd
; /* 0x34 - PID derivative gain */
53 fu16 voph
; /* 0x38 - Vop High */
54 fu16 vopl
; /* 0x3a - Vop Low */
55 fs16 nactual_die
; /* 0x3c - nActual Die */
56 fs16 nactual_heatsink
; /* 0x3e - nActual Heatsink */
57 fs16 nactual_system
; /* 0x40 - nActual System */
58 u16 calibration_flags
; /* 0x42 - Calibration flags */
59 fu16 mdiode
; /* 0x44 - Diode M value (scaling factor) */
60 fs16 bdiode
; /* 0x46 - Diode B value (offset) */
61 fs32 theta_heat_sink
; /* 0x48 - Theta heat sink */
62 u16 rminn_intake_fan
; /* 0x4c - Intake fan min RPM */
63 u16 rmaxn_intake_fan
; /* 0x4e - Intake fan max RPM */
64 u16 rminn_exhaust_fan
; /* 0x50 - Exhaust fan min RPM */
65 u16 rmaxn_exhaust_fan
; /* 0x52 - Exhaust fan max RPM */
66 u8 processor_part_num
[8]; /* 0x54 - Processor part number XX pumps min/max */
67 u32 processor_lot_num
; /* 0x5c - Processor lot number */
68 u8 orig_card_sernum
[0x10]; /* 0x60 - Card original serial number */
69 u8 curr_card_sernum
[0x10]; /* 0x70 - Card current serial number */
70 u8 mlb_sernum
[0x18]; /* 0x80 - MLB serial number */
71 u32 checksum1
; /* 0x98 - */
72 u32 checksum2
; /* 0x9c - */
73 }; /* Total size = 0xa0 */
75 static inline const struct mpu_data
*wf_get_mpu(int cpu
)
77 struct device_node
*np
;
83 * prom.c routine for finding a node by path is a bit brain dead
84 * and requires exact @xxx unit numbers. This is a bit ugly but
85 * will work for these machines
87 sprintf(nodename
, "/u3@0,f8000000/i2c@f8001000/cpuid@a%d", cpu
? 2 : 0);
88 np
= of_find_node_by_path(nodename
);
91 data
= of_get_property(np
, "cpuid", &len
);
97 * We are naughty, we have dropped the reference to the device
98 * node and still return a pointer to the content. We know we
99 * can do that though as this is only ever called on PowerMac
100 * which cannot remove those nodes
105 #endif /* __WINDFARM_MPU_H */
This page took 0.102536 seconds and 5 git commands to generate.