2 * raid10.c : Multiple Devices driver for Linux
4 * Copyright (C) 2000-2004 Neil Brown
6 * RAID-10 support for md.
8 * Base on code in raid1.c. See raid1.c for further copyright information.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2, or (at your option)
16 * You should have received a copy of the GNU General Public License
17 * (for example /usr/src/linux/COPYING); if not, write to the Free
18 * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 #include <linux/slab.h>
22 #include <linux/delay.h>
23 #include <linux/blkdev.h>
24 #include <linux/module.h>
25 #include <linux/seq_file.h>
26 #include <linux/ratelimit.h>
27 #include <linux/kthread.h>
34 * RAID10 provides a combination of RAID0 and RAID1 functionality.
35 * The layout of data is defined by
38 * near_copies (stored in low byte of layout)
39 * far_copies (stored in second byte of layout)
40 * far_offset (stored in bit 16 of layout )
41 * use_far_sets (stored in bit 17 of layout )
43 * The data to be stored is divided into chunks using chunksize. Each device
44 * is divided into far_copies sections. In each section, chunks are laid out
45 * in a style similar to raid0, but near_copies copies of each chunk is stored
46 * (each on a different drive). The starting device for each section is offset
47 * near_copies from the starting device of the previous section. Thus there
48 * are (near_copies * far_copies) of each chunk, and each is on a different
49 * drive. near_copies and far_copies must be at least one, and their product
50 * is at most raid_disks.
52 * If far_offset is true, then the far_copies are handled a bit differently.
53 * The copies are still in different stripes, but instead of being very far
54 * apart on disk, there are adjacent stripes.
56 * The far and offset algorithms are handled slightly differently if
57 * 'use_far_sets' is true. In this case, the array's devices are grouped into
58 * sets that are (near_copies * far_copies) in size. The far copied stripes
59 * are still shifted by 'near_copies' devices, but this shifting stays confined
60 * to the set rather than the entire array. This is done to improve the number
61 * of device combinations that can fail without causing the array to fail.
62 * Example 'far' algorithm w/o 'use_far_sets' (each letter represents a chunk
67 * Example 'far' algorithm w/ 'use_far_sets' enabled (sets illustrated w/ []'s):
68 * [A B] [C D] [A B] [C D E]
69 * |...| |...| |...| | ... |
70 * [B A] [D C] [B A] [E C D]
74 * Number of guaranteed r10bios in case of extreme VM load:
76 #define NR_RAID10_BIOS 256
78 /* when we get a read error on a read-only array, we redirect to another
79 * device without failing the first device, or trying to over-write to
80 * correct the read error. To keep track of bad blocks on a per-bio
81 * level, we store IO_BLOCKED in the appropriate 'bios' pointer
83 #define IO_BLOCKED ((struct bio *)1)
84 /* When we successfully write to a known bad-block, we need to remove the
85 * bad-block marking which must be done from process context. So we record
86 * the success by setting devs[n].bio to IO_MADE_GOOD
88 #define IO_MADE_GOOD ((struct bio *)2)
90 #define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
92 /* When there are this many requests queued to be written by
93 * the raid10 thread, we become 'congested' to provide back-pressure
96 static int max_queued_requests
= 1024;
98 static void allow_barrier(struct r10conf
*conf
);
99 static void lower_barrier(struct r10conf
*conf
);
100 static int enough(struct r10conf
*conf
, int ignore
);
101 static sector_t
reshape_request(struct mddev
*mddev
, sector_t sector_nr
,
103 static void reshape_request_write(struct mddev
*mddev
, struct r10bio
*r10_bio
);
104 static void end_reshape_write(struct bio
*bio
, int error
);
105 static void end_reshape(struct r10conf
*conf
);
107 static void * r10bio_pool_alloc(gfp_t gfp_flags
, void *data
)
109 struct r10conf
*conf
= data
;
110 int size
= offsetof(struct r10bio
, devs
[conf
->copies
]);
112 /* allocate a r10bio with room for raid_disks entries in the
114 return kzalloc(size
, gfp_flags
);
117 static void r10bio_pool_free(void *r10_bio
, void *data
)
122 /* Maximum size of each resync request */
123 #define RESYNC_BLOCK_SIZE (64*1024)
124 #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE)
125 /* amount of memory to reserve for resync requests */
126 #define RESYNC_WINDOW (1024*1024)
127 /* maximum number of concurrent requests, memory permitting */
128 #define RESYNC_DEPTH (32*1024*1024/RESYNC_BLOCK_SIZE)
131 * When performing a resync, we need to read and compare, so
132 * we need as many pages are there are copies.
133 * When performing a recovery, we need 2 bios, one for read,
134 * one for write (we recover only one drive per r10buf)
137 static void * r10buf_pool_alloc(gfp_t gfp_flags
, void *data
)
139 struct r10conf
*conf
= data
;
141 struct r10bio
*r10_bio
;
146 r10_bio
= r10bio_pool_alloc(gfp_flags
, conf
);
150 if (test_bit(MD_RECOVERY_SYNC
, &conf
->mddev
->recovery
) ||
151 test_bit(MD_RECOVERY_RESHAPE
, &conf
->mddev
->recovery
))
152 nalloc
= conf
->copies
; /* resync */
154 nalloc
= 2; /* recovery */
159 for (j
= nalloc
; j
-- ; ) {
160 bio
= bio_kmalloc(gfp_flags
, RESYNC_PAGES
);
163 r10_bio
->devs
[j
].bio
= bio
;
164 if (!conf
->have_replacement
)
166 bio
= bio_kmalloc(gfp_flags
, RESYNC_PAGES
);
169 r10_bio
->devs
[j
].repl_bio
= bio
;
172 * Allocate RESYNC_PAGES data pages and attach them
175 for (j
= 0 ; j
< nalloc
; j
++) {
176 struct bio
*rbio
= r10_bio
->devs
[j
].repl_bio
;
177 bio
= r10_bio
->devs
[j
].bio
;
178 for (i
= 0; i
< RESYNC_PAGES
; i
++) {
179 if (j
> 0 && !test_bit(MD_RECOVERY_SYNC
,
180 &conf
->mddev
->recovery
)) {
181 /* we can share bv_page's during recovery
183 struct bio
*rbio
= r10_bio
->devs
[0].bio
;
184 page
= rbio
->bi_io_vec
[i
].bv_page
;
187 page
= alloc_page(gfp_flags
);
191 bio
->bi_io_vec
[i
].bv_page
= page
;
193 rbio
->bi_io_vec
[i
].bv_page
= page
;
201 safe_put_page(bio
->bi_io_vec
[i
-1].bv_page
);
203 for (i
= 0; i
< RESYNC_PAGES
; i
++)
204 safe_put_page(r10_bio
->devs
[j
].bio
->bi_io_vec
[i
].bv_page
);
207 for ( ; j
< nalloc
; j
++) {
208 if (r10_bio
->devs
[j
].bio
)
209 bio_put(r10_bio
->devs
[j
].bio
);
210 if (r10_bio
->devs
[j
].repl_bio
)
211 bio_put(r10_bio
->devs
[j
].repl_bio
);
213 r10bio_pool_free(r10_bio
, conf
);
217 static void r10buf_pool_free(void *__r10_bio
, void *data
)
220 struct r10conf
*conf
= data
;
221 struct r10bio
*r10bio
= __r10_bio
;
224 for (j
=0; j
< conf
->copies
; j
++) {
225 struct bio
*bio
= r10bio
->devs
[j
].bio
;
227 for (i
= 0; i
< RESYNC_PAGES
; i
++) {
228 safe_put_page(bio
->bi_io_vec
[i
].bv_page
);
229 bio
->bi_io_vec
[i
].bv_page
= NULL
;
233 bio
= r10bio
->devs
[j
].repl_bio
;
237 r10bio_pool_free(r10bio
, conf
);
240 static void put_all_bios(struct r10conf
*conf
, struct r10bio
*r10_bio
)
244 for (i
= 0; i
< conf
->copies
; i
++) {
245 struct bio
**bio
= & r10_bio
->devs
[i
].bio
;
246 if (!BIO_SPECIAL(*bio
))
249 bio
= &r10_bio
->devs
[i
].repl_bio
;
250 if (r10_bio
->read_slot
< 0 && !BIO_SPECIAL(*bio
))
256 static void free_r10bio(struct r10bio
*r10_bio
)
258 struct r10conf
*conf
= r10_bio
->mddev
->private;
260 put_all_bios(conf
, r10_bio
);
261 mempool_free(r10_bio
, conf
->r10bio_pool
);
264 static void put_buf(struct r10bio
*r10_bio
)
266 struct r10conf
*conf
= r10_bio
->mddev
->private;
268 mempool_free(r10_bio
, conf
->r10buf_pool
);
273 static void reschedule_retry(struct r10bio
*r10_bio
)
276 struct mddev
*mddev
= r10_bio
->mddev
;
277 struct r10conf
*conf
= mddev
->private;
279 spin_lock_irqsave(&conf
->device_lock
, flags
);
280 list_add(&r10_bio
->retry_list
, &conf
->retry_list
);
282 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
284 /* wake up frozen array... */
285 wake_up(&conf
->wait_barrier
);
287 md_wakeup_thread(mddev
->thread
);
291 * raid_end_bio_io() is called when we have finished servicing a mirrored
292 * operation and are ready to return a success/failure code to the buffer
295 static void raid_end_bio_io(struct r10bio
*r10_bio
)
297 struct bio
*bio
= r10_bio
->master_bio
;
299 struct r10conf
*conf
= r10_bio
->mddev
->private;
301 if (bio
->bi_phys_segments
) {
303 spin_lock_irqsave(&conf
->device_lock
, flags
);
304 bio
->bi_phys_segments
--;
305 done
= (bio
->bi_phys_segments
== 0);
306 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
309 if (!test_bit(R10BIO_Uptodate
, &r10_bio
->state
))
310 clear_bit(BIO_UPTODATE
, &bio
->bi_flags
);
314 * Wake up any possible resync thread that waits for the device
319 free_r10bio(r10_bio
);
323 * Update disk head position estimator based on IRQ completion info.
325 static inline void update_head_pos(int slot
, struct r10bio
*r10_bio
)
327 struct r10conf
*conf
= r10_bio
->mddev
->private;
329 conf
->mirrors
[r10_bio
->devs
[slot
].devnum
].head_position
=
330 r10_bio
->devs
[slot
].addr
+ (r10_bio
->sectors
);
334 * Find the disk number which triggered given bio
336 static int find_bio_disk(struct r10conf
*conf
, struct r10bio
*r10_bio
,
337 struct bio
*bio
, int *slotp
, int *replp
)
342 for (slot
= 0; slot
< conf
->copies
; slot
++) {
343 if (r10_bio
->devs
[slot
].bio
== bio
)
345 if (r10_bio
->devs
[slot
].repl_bio
== bio
) {
351 BUG_ON(slot
== conf
->copies
);
352 update_head_pos(slot
, r10_bio
);
358 return r10_bio
->devs
[slot
].devnum
;
361 static void raid10_end_read_request(struct bio
*bio
, int error
)
363 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
364 struct r10bio
*r10_bio
= bio
->bi_private
;
366 struct md_rdev
*rdev
;
367 struct r10conf
*conf
= r10_bio
->mddev
->private;
370 slot
= r10_bio
->read_slot
;
371 dev
= r10_bio
->devs
[slot
].devnum
;
372 rdev
= r10_bio
->devs
[slot
].rdev
;
374 * this branch is our 'one mirror IO has finished' event handler:
376 update_head_pos(slot
, r10_bio
);
380 * Set R10BIO_Uptodate in our master bio, so that
381 * we will return a good error code to the higher
382 * levels even if IO on some other mirrored buffer fails.
384 * The 'master' represents the composite IO operation to
385 * user-side. So if something waits for IO, then it will
386 * wait for the 'master' bio.
388 set_bit(R10BIO_Uptodate
, &r10_bio
->state
);
390 /* If all other devices that store this block have
391 * failed, we want to return the error upwards rather
392 * than fail the last device. Here we redefine
393 * "uptodate" to mean "Don't want to retry"
396 spin_lock_irqsave(&conf
->device_lock
, flags
);
397 if (!enough(conf
, rdev
->raid_disk
))
399 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
402 raid_end_bio_io(r10_bio
);
403 rdev_dec_pending(rdev
, conf
->mddev
);
406 * oops, read error - keep the refcount on the rdev
408 char b
[BDEVNAME_SIZE
];
409 printk_ratelimited(KERN_ERR
410 "md/raid10:%s: %s: rescheduling sector %llu\n",
412 bdevname(rdev
->bdev
, b
),
413 (unsigned long long)r10_bio
->sector
);
414 set_bit(R10BIO_ReadError
, &r10_bio
->state
);
415 reschedule_retry(r10_bio
);
419 static void close_write(struct r10bio
*r10_bio
)
421 /* clear the bitmap if all writes complete successfully */
422 bitmap_endwrite(r10_bio
->mddev
->bitmap
, r10_bio
->sector
,
424 !test_bit(R10BIO_Degraded
, &r10_bio
->state
),
426 md_write_end(r10_bio
->mddev
);
429 static void one_write_done(struct r10bio
*r10_bio
)
431 if (atomic_dec_and_test(&r10_bio
->remaining
)) {
432 if (test_bit(R10BIO_WriteError
, &r10_bio
->state
))
433 reschedule_retry(r10_bio
);
435 close_write(r10_bio
);
436 if (test_bit(R10BIO_MadeGood
, &r10_bio
->state
))
437 reschedule_retry(r10_bio
);
439 raid_end_bio_io(r10_bio
);
444 static void raid10_end_write_request(struct bio
*bio
, int error
)
446 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
447 struct r10bio
*r10_bio
= bio
->bi_private
;
450 struct r10conf
*conf
= r10_bio
->mddev
->private;
452 struct md_rdev
*rdev
= NULL
;
454 dev
= find_bio_disk(conf
, r10_bio
, bio
, &slot
, &repl
);
457 rdev
= conf
->mirrors
[dev
].replacement
;
461 rdev
= conf
->mirrors
[dev
].rdev
;
464 * this branch is our 'one mirror IO has finished' event handler:
468 /* Never record new bad blocks to replacement,
471 md_error(rdev
->mddev
, rdev
);
473 set_bit(WriteErrorSeen
, &rdev
->flags
);
474 if (!test_and_set_bit(WantReplacement
, &rdev
->flags
))
475 set_bit(MD_RECOVERY_NEEDED
,
476 &rdev
->mddev
->recovery
);
477 set_bit(R10BIO_WriteError
, &r10_bio
->state
);
482 * Set R10BIO_Uptodate in our master bio, so that
483 * we will return a good error code for to the higher
484 * levels even if IO on some other mirrored buffer fails.
486 * The 'master' represents the composite IO operation to
487 * user-side. So if something waits for IO, then it will
488 * wait for the 'master' bio.
494 * Do not set R10BIO_Uptodate if the current device is
495 * rebuilding or Faulty. This is because we cannot use
496 * such device for properly reading the data back (we could
497 * potentially use it, if the current write would have felt
498 * before rdev->recovery_offset, but for simplicity we don't
501 if (test_bit(In_sync
, &rdev
->flags
) &&
502 !test_bit(Faulty
, &rdev
->flags
))
503 set_bit(R10BIO_Uptodate
, &r10_bio
->state
);
505 /* Maybe we can clear some bad blocks. */
506 if (is_badblock(rdev
,
507 r10_bio
->devs
[slot
].addr
,
509 &first_bad
, &bad_sectors
)) {
512 r10_bio
->devs
[slot
].repl_bio
= IO_MADE_GOOD
;
514 r10_bio
->devs
[slot
].bio
= IO_MADE_GOOD
;
516 set_bit(R10BIO_MadeGood
, &r10_bio
->state
);
522 * Let's see if all mirrored write operations have finished
525 one_write_done(r10_bio
);
527 rdev_dec_pending(rdev
, conf
->mddev
);
531 * RAID10 layout manager
532 * As well as the chunksize and raid_disks count, there are two
533 * parameters: near_copies and far_copies.
534 * near_copies * far_copies must be <= raid_disks.
535 * Normally one of these will be 1.
536 * If both are 1, we get raid0.
537 * If near_copies == raid_disks, we get raid1.
539 * Chunks are laid out in raid0 style with near_copies copies of the
540 * first chunk, followed by near_copies copies of the next chunk and
542 * If far_copies > 1, then after 1/far_copies of the array has been assigned
543 * as described above, we start again with a device offset of near_copies.
544 * So we effectively have another copy of the whole array further down all
545 * the drives, but with blocks on different drives.
546 * With this layout, and block is never stored twice on the one device.
548 * raid10_find_phys finds the sector offset of a given virtual sector
549 * on each device that it is on.
551 * raid10_find_virt does the reverse mapping, from a device and a
552 * sector offset to a virtual address
555 static void __raid10_find_phys(struct geom
*geo
, struct r10bio
*r10bio
)
563 int last_far_set_start
, last_far_set_size
;
565 last_far_set_start
= (geo
->raid_disks
/ geo
->far_set_size
) - 1;
566 last_far_set_start
*= geo
->far_set_size
;
568 last_far_set_size
= geo
->far_set_size
;
569 last_far_set_size
+= (geo
->raid_disks
% geo
->far_set_size
);
571 /* now calculate first sector/dev */
572 chunk
= r10bio
->sector
>> geo
->chunk_shift
;
573 sector
= r10bio
->sector
& geo
->chunk_mask
;
575 chunk
*= geo
->near_copies
;
577 dev
= sector_div(stripe
, geo
->raid_disks
);
579 stripe
*= geo
->far_copies
;
581 sector
+= stripe
<< geo
->chunk_shift
;
583 /* and calculate all the others */
584 for (n
= 0; n
< geo
->near_copies
; n
++) {
588 r10bio
->devs
[slot
].devnum
= d
;
589 r10bio
->devs
[slot
].addr
= s
;
592 for (f
= 1; f
< geo
->far_copies
; f
++) {
593 set
= d
/ geo
->far_set_size
;
594 d
+= geo
->near_copies
;
596 if ((geo
->raid_disks
% geo
->far_set_size
) &&
597 (d
> last_far_set_start
)) {
598 d
-= last_far_set_start
;
599 d
%= last_far_set_size
;
600 d
+= last_far_set_start
;
602 d
%= geo
->far_set_size
;
603 d
+= geo
->far_set_size
* set
;
606 r10bio
->devs
[slot
].devnum
= d
;
607 r10bio
->devs
[slot
].addr
= s
;
611 if (dev
>= geo
->raid_disks
) {
613 sector
+= (geo
->chunk_mask
+ 1);
618 static void raid10_find_phys(struct r10conf
*conf
, struct r10bio
*r10bio
)
620 struct geom
*geo
= &conf
->geo
;
622 if (conf
->reshape_progress
!= MaxSector
&&
623 ((r10bio
->sector
>= conf
->reshape_progress
) !=
624 conf
->mddev
->reshape_backwards
)) {
625 set_bit(R10BIO_Previous
, &r10bio
->state
);
628 clear_bit(R10BIO_Previous
, &r10bio
->state
);
630 __raid10_find_phys(geo
, r10bio
);
633 static sector_t
raid10_find_virt(struct r10conf
*conf
, sector_t sector
, int dev
)
635 sector_t offset
, chunk
, vchunk
;
636 /* Never use conf->prev as this is only called during resync
637 * or recovery, so reshape isn't happening
639 struct geom
*geo
= &conf
->geo
;
640 int far_set_start
= (dev
/ geo
->far_set_size
) * geo
->far_set_size
;
641 int far_set_size
= geo
->far_set_size
;
642 int last_far_set_start
;
644 if (geo
->raid_disks
% geo
->far_set_size
) {
645 last_far_set_start
= (geo
->raid_disks
/ geo
->far_set_size
) - 1;
646 last_far_set_start
*= geo
->far_set_size
;
648 if (dev
>= last_far_set_start
) {
649 far_set_size
= geo
->far_set_size
;
650 far_set_size
+= (geo
->raid_disks
% geo
->far_set_size
);
651 far_set_start
= last_far_set_start
;
655 offset
= sector
& geo
->chunk_mask
;
656 if (geo
->far_offset
) {
658 chunk
= sector
>> geo
->chunk_shift
;
659 fc
= sector_div(chunk
, geo
->far_copies
);
660 dev
-= fc
* geo
->near_copies
;
661 if (dev
< far_set_start
)
664 while (sector
>= geo
->stride
) {
665 sector
-= geo
->stride
;
666 if (dev
< (geo
->near_copies
+ far_set_start
))
667 dev
+= far_set_size
- geo
->near_copies
;
669 dev
-= geo
->near_copies
;
671 chunk
= sector
>> geo
->chunk_shift
;
673 vchunk
= chunk
* geo
->raid_disks
+ dev
;
674 sector_div(vchunk
, geo
->near_copies
);
675 return (vchunk
<< geo
->chunk_shift
) + offset
;
679 * raid10_mergeable_bvec -- tell bio layer if a two requests can be merged
681 * @bvm: properties of new bio
682 * @biovec: the request that could be merged to it.
684 * Return amount of bytes we can accept at this offset
685 * This requires checking for end-of-chunk if near_copies != raid_disks,
686 * and for subordinate merge_bvec_fns if merge_check_needed.
688 static int raid10_mergeable_bvec(struct request_queue
*q
,
689 struct bvec_merge_data
*bvm
,
690 struct bio_vec
*biovec
)
692 struct mddev
*mddev
= q
->queuedata
;
693 struct r10conf
*conf
= mddev
->private;
694 sector_t sector
= bvm
->bi_sector
+ get_start_sect(bvm
->bi_bdev
);
696 unsigned int chunk_sectors
;
697 unsigned int bio_sectors
= bvm
->bi_size
>> 9;
698 struct geom
*geo
= &conf
->geo
;
700 chunk_sectors
= (conf
->geo
.chunk_mask
& conf
->prev
.chunk_mask
) + 1;
701 if (conf
->reshape_progress
!= MaxSector
&&
702 ((sector
>= conf
->reshape_progress
) !=
703 conf
->mddev
->reshape_backwards
))
706 if (geo
->near_copies
< geo
->raid_disks
) {
707 max
= (chunk_sectors
- ((sector
& (chunk_sectors
- 1))
708 + bio_sectors
)) << 9;
710 /* bio_add cannot handle a negative return */
712 if (max
<= biovec
->bv_len
&& bio_sectors
== 0)
713 return biovec
->bv_len
;
715 max
= biovec
->bv_len
;
717 if (mddev
->merge_check_needed
) {
719 struct r10bio r10_bio
;
720 struct r10dev devs
[conf
->copies
];
722 struct r10bio
*r10_bio
= &on_stack
.r10_bio
;
724 if (conf
->reshape_progress
!= MaxSector
) {
725 /* Cannot give any guidance during reshape */
726 if (max
<= biovec
->bv_len
&& bio_sectors
== 0)
727 return biovec
->bv_len
;
730 r10_bio
->sector
= sector
;
731 raid10_find_phys(conf
, r10_bio
);
733 for (s
= 0; s
< conf
->copies
; s
++) {
734 int disk
= r10_bio
->devs
[s
].devnum
;
735 struct md_rdev
*rdev
= rcu_dereference(
736 conf
->mirrors
[disk
].rdev
);
737 if (rdev
&& !test_bit(Faulty
, &rdev
->flags
)) {
738 struct request_queue
*q
=
739 bdev_get_queue(rdev
->bdev
);
740 if (q
->merge_bvec_fn
) {
741 bvm
->bi_sector
= r10_bio
->devs
[s
].addr
743 bvm
->bi_bdev
= rdev
->bdev
;
744 max
= min(max
, q
->merge_bvec_fn(
748 rdev
= rcu_dereference(conf
->mirrors
[disk
].replacement
);
749 if (rdev
&& !test_bit(Faulty
, &rdev
->flags
)) {
750 struct request_queue
*q
=
751 bdev_get_queue(rdev
->bdev
);
752 if (q
->merge_bvec_fn
) {
753 bvm
->bi_sector
= r10_bio
->devs
[s
].addr
755 bvm
->bi_bdev
= rdev
->bdev
;
756 max
= min(max
, q
->merge_bvec_fn(
767 * This routine returns the disk from which the requested read should
768 * be done. There is a per-array 'next expected sequential IO' sector
769 * number - if this matches on the next IO then we use the last disk.
770 * There is also a per-disk 'last know head position' sector that is
771 * maintained from IRQ contexts, both the normal and the resync IO
772 * completion handlers update this position correctly. If there is no
773 * perfect sequential match then we pick the disk whose head is closest.
775 * If there are 2 mirrors in the same 2 devices, performance degrades
776 * because position is mirror, not device based.
778 * The rdev for the device selected will have nr_pending incremented.
782 * FIXME: possibly should rethink readbalancing and do it differently
783 * depending on near_copies / far_copies geometry.
785 static struct md_rdev
*read_balance(struct r10conf
*conf
,
786 struct r10bio
*r10_bio
,
789 const sector_t this_sector
= r10_bio
->sector
;
791 int sectors
= r10_bio
->sectors
;
792 int best_good_sectors
;
793 sector_t new_distance
, best_dist
;
794 struct md_rdev
*best_rdev
, *rdev
= NULL
;
797 struct geom
*geo
= &conf
->geo
;
799 raid10_find_phys(conf
, r10_bio
);
802 sectors
= r10_bio
->sectors
;
805 best_dist
= MaxSector
;
806 best_good_sectors
= 0;
809 * Check if we can balance. We can balance on the whole
810 * device if no resync is going on (recovery is ok), or below
811 * the resync window. We take the first readable disk when
812 * above the resync window.
814 if (conf
->mddev
->recovery_cp
< MaxSector
815 && (this_sector
+ sectors
>= conf
->next_resync
))
818 for (slot
= 0; slot
< conf
->copies
; slot
++) {
823 if (r10_bio
->devs
[slot
].bio
== IO_BLOCKED
)
825 disk
= r10_bio
->devs
[slot
].devnum
;
826 rdev
= rcu_dereference(conf
->mirrors
[disk
].replacement
);
827 if (rdev
== NULL
|| test_bit(Faulty
, &rdev
->flags
) ||
828 test_bit(Unmerged
, &rdev
->flags
) ||
829 r10_bio
->devs
[slot
].addr
+ sectors
> rdev
->recovery_offset
)
830 rdev
= rcu_dereference(conf
->mirrors
[disk
].rdev
);
832 test_bit(Faulty
, &rdev
->flags
) ||
833 test_bit(Unmerged
, &rdev
->flags
))
835 if (!test_bit(In_sync
, &rdev
->flags
) &&
836 r10_bio
->devs
[slot
].addr
+ sectors
> rdev
->recovery_offset
)
839 dev_sector
= r10_bio
->devs
[slot
].addr
;
840 if (is_badblock(rdev
, dev_sector
, sectors
,
841 &first_bad
, &bad_sectors
)) {
842 if (best_dist
< MaxSector
)
843 /* Already have a better slot */
845 if (first_bad
<= dev_sector
) {
846 /* Cannot read here. If this is the
847 * 'primary' device, then we must not read
848 * beyond 'bad_sectors' from another device.
850 bad_sectors
-= (dev_sector
- first_bad
);
851 if (!do_balance
&& sectors
> bad_sectors
)
852 sectors
= bad_sectors
;
853 if (best_good_sectors
> sectors
)
854 best_good_sectors
= sectors
;
856 sector_t good_sectors
=
857 first_bad
- dev_sector
;
858 if (good_sectors
> best_good_sectors
) {
859 best_good_sectors
= good_sectors
;
864 /* Must read from here */
869 best_good_sectors
= sectors
;
874 /* This optimisation is debatable, and completely destroys
875 * sequential read speed for 'far copies' arrays. So only
876 * keep it for 'near' arrays, and review those later.
878 if (geo
->near_copies
> 1 && !atomic_read(&rdev
->nr_pending
))
881 /* for far > 1 always use the lowest address */
882 if (geo
->far_copies
> 1)
883 new_distance
= r10_bio
->devs
[slot
].addr
;
885 new_distance
= abs(r10_bio
->devs
[slot
].addr
-
886 conf
->mirrors
[disk
].head_position
);
887 if (new_distance
< best_dist
) {
888 best_dist
= new_distance
;
893 if (slot
>= conf
->copies
) {
899 atomic_inc(&rdev
->nr_pending
);
900 if (test_bit(Faulty
, &rdev
->flags
)) {
901 /* Cannot risk returning a device that failed
902 * before we inc'ed nr_pending
904 rdev_dec_pending(rdev
, conf
->mddev
);
907 r10_bio
->read_slot
= slot
;
911 *max_sectors
= best_good_sectors
;
916 int md_raid10_congested(struct mddev
*mddev
, int bits
)
918 struct r10conf
*conf
= mddev
->private;
921 if ((bits
& (1 << BDI_async_congested
)) &&
922 conf
->pending_count
>= max_queued_requests
)
927 (i
< conf
->geo
.raid_disks
|| i
< conf
->prev
.raid_disks
)
930 struct md_rdev
*rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
931 if (rdev
&& !test_bit(Faulty
, &rdev
->flags
)) {
932 struct request_queue
*q
= bdev_get_queue(rdev
->bdev
);
934 ret
|= bdi_congested(&q
->backing_dev_info
, bits
);
940 EXPORT_SYMBOL_GPL(md_raid10_congested
);
942 static int raid10_congested(void *data
, int bits
)
944 struct mddev
*mddev
= data
;
946 return mddev_congested(mddev
, bits
) ||
947 md_raid10_congested(mddev
, bits
);
950 static void flush_pending_writes(struct r10conf
*conf
)
952 /* Any writes that have been queued but are awaiting
953 * bitmap updates get flushed here.
955 spin_lock_irq(&conf
->device_lock
);
957 if (conf
->pending_bio_list
.head
) {
959 bio
= bio_list_get(&conf
->pending_bio_list
);
960 conf
->pending_count
= 0;
961 spin_unlock_irq(&conf
->device_lock
);
962 /* flush any pending bitmap writes to disk
963 * before proceeding w/ I/O */
964 bitmap_unplug(conf
->mddev
->bitmap
);
965 wake_up(&conf
->wait_barrier
);
967 while (bio
) { /* submit pending writes */
968 struct bio
*next
= bio
->bi_next
;
970 if (unlikely((bio
->bi_rw
& REQ_DISCARD
) &&
971 !blk_queue_discard(bdev_get_queue(bio
->bi_bdev
))))
975 generic_make_request(bio
);
979 spin_unlock_irq(&conf
->device_lock
);
983 * Sometimes we need to suspend IO while we do something else,
984 * either some resync/recovery, or reconfigure the array.
985 * To do this we raise a 'barrier'.
986 * The 'barrier' is a counter that can be raised multiple times
987 * to count how many activities are happening which preclude
989 * We can only raise the barrier if there is no pending IO.
990 * i.e. if nr_pending == 0.
991 * We choose only to raise the barrier if no-one is waiting for the
992 * barrier to go down. This means that as soon as an IO request
993 * is ready, no other operations which require a barrier will start
994 * until the IO request has had a chance.
996 * So: regular IO calls 'wait_barrier'. When that returns there
997 * is no backgroup IO happening, It must arrange to call
998 * allow_barrier when it has finished its IO.
999 * backgroup IO calls must call raise_barrier. Once that returns
1000 * there is no normal IO happeing. It must arrange to call
1001 * lower_barrier when the particular background IO completes.
1004 static void raise_barrier(struct r10conf
*conf
, int force
)
1006 BUG_ON(force
&& !conf
->barrier
);
1007 spin_lock_irq(&conf
->resync_lock
);
1009 /* Wait until no block IO is waiting (unless 'force') */
1010 wait_event_lock_irq(conf
->wait_barrier
, force
|| !conf
->nr_waiting
,
1013 /* block any new IO from starting */
1016 /* Now wait for all pending IO to complete */
1017 wait_event_lock_irq(conf
->wait_barrier
,
1018 !conf
->nr_pending
&& conf
->barrier
< RESYNC_DEPTH
,
1021 spin_unlock_irq(&conf
->resync_lock
);
1024 static void lower_barrier(struct r10conf
*conf
)
1026 unsigned long flags
;
1027 spin_lock_irqsave(&conf
->resync_lock
, flags
);
1029 spin_unlock_irqrestore(&conf
->resync_lock
, flags
);
1030 wake_up(&conf
->wait_barrier
);
1033 static void wait_barrier(struct r10conf
*conf
)
1035 spin_lock_irq(&conf
->resync_lock
);
1036 if (conf
->barrier
) {
1038 /* Wait for the barrier to drop.
1039 * However if there are already pending
1040 * requests (preventing the barrier from
1041 * rising completely), and the
1042 * pre-process bio queue isn't empty,
1043 * then don't wait, as we need to empty
1044 * that queue to get the nr_pending
1047 wait_event_lock_irq(conf
->wait_barrier
,
1049 (conf
->nr_pending
&&
1050 current
->bio_list
&&
1051 !bio_list_empty(current
->bio_list
)),
1056 spin_unlock_irq(&conf
->resync_lock
);
1059 static void allow_barrier(struct r10conf
*conf
)
1061 unsigned long flags
;
1062 spin_lock_irqsave(&conf
->resync_lock
, flags
);
1064 spin_unlock_irqrestore(&conf
->resync_lock
, flags
);
1065 wake_up(&conf
->wait_barrier
);
1068 static void freeze_array(struct r10conf
*conf
, int extra
)
1070 /* stop syncio and normal IO and wait for everything to
1072 * We increment barrier and nr_waiting, and then
1073 * wait until nr_pending match nr_queued+extra
1074 * This is called in the context of one normal IO request
1075 * that has failed. Thus any sync request that might be pending
1076 * will be blocked by nr_pending, and we need to wait for
1077 * pending IO requests to complete or be queued for re-try.
1078 * Thus the number queued (nr_queued) plus this request (extra)
1079 * must match the number of pending IOs (nr_pending) before
1082 spin_lock_irq(&conf
->resync_lock
);
1085 wait_event_lock_irq_cmd(conf
->wait_barrier
,
1086 conf
->nr_pending
== conf
->nr_queued
+extra
,
1088 flush_pending_writes(conf
));
1090 spin_unlock_irq(&conf
->resync_lock
);
1093 static void unfreeze_array(struct r10conf
*conf
)
1095 /* reverse the effect of the freeze */
1096 spin_lock_irq(&conf
->resync_lock
);
1099 wake_up(&conf
->wait_barrier
);
1100 spin_unlock_irq(&conf
->resync_lock
);
1103 static sector_t
choose_data_offset(struct r10bio
*r10_bio
,
1104 struct md_rdev
*rdev
)
1106 if (!test_bit(MD_RECOVERY_RESHAPE
, &rdev
->mddev
->recovery
) ||
1107 test_bit(R10BIO_Previous
, &r10_bio
->state
))
1108 return rdev
->data_offset
;
1110 return rdev
->new_data_offset
;
1113 struct raid10_plug_cb
{
1114 struct blk_plug_cb cb
;
1115 struct bio_list pending
;
1119 static void raid10_unplug(struct blk_plug_cb
*cb
, bool from_schedule
)
1121 struct raid10_plug_cb
*plug
= container_of(cb
, struct raid10_plug_cb
,
1123 struct mddev
*mddev
= plug
->cb
.data
;
1124 struct r10conf
*conf
= mddev
->private;
1127 if (from_schedule
|| current
->bio_list
) {
1128 spin_lock_irq(&conf
->device_lock
);
1129 bio_list_merge(&conf
->pending_bio_list
, &plug
->pending
);
1130 conf
->pending_count
+= plug
->pending_cnt
;
1131 spin_unlock_irq(&conf
->device_lock
);
1132 wake_up(&conf
->wait_barrier
);
1133 md_wakeup_thread(mddev
->thread
);
1138 /* we aren't scheduling, so we can do the write-out directly. */
1139 bio
= bio_list_get(&plug
->pending
);
1140 bitmap_unplug(mddev
->bitmap
);
1141 wake_up(&conf
->wait_barrier
);
1143 while (bio
) { /* submit pending writes */
1144 struct bio
*next
= bio
->bi_next
;
1145 bio
->bi_next
= NULL
;
1146 if (unlikely((bio
->bi_rw
& REQ_DISCARD
) &&
1147 !blk_queue_discard(bdev_get_queue(bio
->bi_bdev
))))
1148 /* Just ignore it */
1151 generic_make_request(bio
);
1157 static void make_request(struct mddev
*mddev
, struct bio
* bio
)
1159 struct r10conf
*conf
= mddev
->private;
1160 struct r10bio
*r10_bio
;
1161 struct bio
*read_bio
;
1163 sector_t chunk_mask
= (conf
->geo
.chunk_mask
& conf
->prev
.chunk_mask
);
1164 int chunk_sects
= chunk_mask
+ 1;
1165 const int rw
= bio_data_dir(bio
);
1166 const unsigned long do_sync
= (bio
->bi_rw
& REQ_SYNC
);
1167 const unsigned long do_fua
= (bio
->bi_rw
& REQ_FUA
);
1168 const unsigned long do_discard
= (bio
->bi_rw
1169 & (REQ_DISCARD
| REQ_SECURE
));
1170 const unsigned long do_same
= (bio
->bi_rw
& REQ_WRITE_SAME
);
1171 unsigned long flags
;
1172 struct md_rdev
*blocked_rdev
;
1173 struct blk_plug_cb
*cb
;
1174 struct raid10_plug_cb
*plug
= NULL
;
1175 int sectors_handled
;
1179 if (unlikely(bio
->bi_rw
& REQ_FLUSH
)) {
1180 md_flush_request(mddev
, bio
);
1184 /* If this request crosses a chunk boundary, we need to
1185 * split it. This will only happen for 1 PAGE (or less) requests.
1187 if (unlikely((bio
->bi_sector
& chunk_mask
) + bio_sectors(bio
)
1189 && (conf
->geo
.near_copies
< conf
->geo
.raid_disks
1190 || conf
->prev
.near_copies
< conf
->prev
.raid_disks
))) {
1191 struct bio_pair
*bp
;
1192 /* Sanity check -- queue functions should prevent this happening */
1193 if (bio_segments(bio
) > 1)
1195 /* This is a one page bio that upper layers
1196 * refuse to split for us, so we need to split it.
1199 chunk_sects
- (bio
->bi_sector
& (chunk_sects
- 1)) );
1201 /* Each of these 'make_request' calls will call 'wait_barrier'.
1202 * If the first succeeds but the second blocks due to the resync
1203 * thread raising the barrier, we will deadlock because the
1204 * IO to the underlying device will be queued in generic_make_request
1205 * and will never complete, so will never reduce nr_pending.
1206 * So increment nr_waiting here so no new raise_barriers will
1207 * succeed, and so the second wait_barrier cannot block.
1209 spin_lock_irq(&conf
->resync_lock
);
1211 spin_unlock_irq(&conf
->resync_lock
);
1213 make_request(mddev
, &bp
->bio1
);
1214 make_request(mddev
, &bp
->bio2
);
1216 spin_lock_irq(&conf
->resync_lock
);
1218 wake_up(&conf
->wait_barrier
);
1219 spin_unlock_irq(&conf
->resync_lock
);
1221 bio_pair_release(bp
);
1224 printk("md/raid10:%s: make_request bug: can't convert block across chunks"
1225 " or bigger than %dk %llu %d\n", mdname(mddev
), chunk_sects
/2,
1226 (unsigned long long)bio
->bi_sector
, bio_sectors(bio
) / 2);
1232 md_write_start(mddev
, bio
);
1235 * Register the new request and wait if the reconstruction
1236 * thread has put up a bar for new requests.
1237 * Continue immediately if no resync is active currently.
1241 sectors
= bio_sectors(bio
);
1242 while (test_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
) &&
1243 bio
->bi_sector
< conf
->reshape_progress
&&
1244 bio
->bi_sector
+ sectors
> conf
->reshape_progress
) {
1245 /* IO spans the reshape position. Need to wait for
1248 allow_barrier(conf
);
1249 wait_event(conf
->wait_barrier
,
1250 conf
->reshape_progress
<= bio
->bi_sector
||
1251 conf
->reshape_progress
>= bio
->bi_sector
+ sectors
);
1254 if (test_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
) &&
1255 bio_data_dir(bio
) == WRITE
&&
1256 (mddev
->reshape_backwards
1257 ? (bio
->bi_sector
< conf
->reshape_safe
&&
1258 bio
->bi_sector
+ sectors
> conf
->reshape_progress
)
1259 : (bio
->bi_sector
+ sectors
> conf
->reshape_safe
&&
1260 bio
->bi_sector
< conf
->reshape_progress
))) {
1261 /* Need to update reshape_position in metadata */
1262 mddev
->reshape_position
= conf
->reshape_progress
;
1263 set_bit(MD_CHANGE_DEVS
, &mddev
->flags
);
1264 set_bit(MD_CHANGE_PENDING
, &mddev
->flags
);
1265 md_wakeup_thread(mddev
->thread
);
1266 wait_event(mddev
->sb_wait
,
1267 !test_bit(MD_CHANGE_PENDING
, &mddev
->flags
));
1269 conf
->reshape_safe
= mddev
->reshape_position
;
1272 r10_bio
= mempool_alloc(conf
->r10bio_pool
, GFP_NOIO
);
1274 r10_bio
->master_bio
= bio
;
1275 r10_bio
->sectors
= sectors
;
1277 r10_bio
->mddev
= mddev
;
1278 r10_bio
->sector
= bio
->bi_sector
;
1281 /* We might need to issue multiple reads to different
1282 * devices if there are bad blocks around, so we keep
1283 * track of the number of reads in bio->bi_phys_segments.
1284 * If this is 0, there is only one r10_bio and no locking
1285 * will be needed when the request completes. If it is
1286 * non-zero, then it is the number of not-completed requests.
1288 bio
->bi_phys_segments
= 0;
1289 clear_bit(BIO_SEG_VALID
, &bio
->bi_flags
);
1293 * read balancing logic:
1295 struct md_rdev
*rdev
;
1299 rdev
= read_balance(conf
, r10_bio
, &max_sectors
);
1301 raid_end_bio_io(r10_bio
);
1304 slot
= r10_bio
->read_slot
;
1306 read_bio
= bio_clone_mddev(bio
, GFP_NOIO
, mddev
);
1307 md_trim_bio(read_bio
, r10_bio
->sector
- bio
->bi_sector
,
1310 r10_bio
->devs
[slot
].bio
= read_bio
;
1311 r10_bio
->devs
[slot
].rdev
= rdev
;
1313 read_bio
->bi_sector
= r10_bio
->devs
[slot
].addr
+
1314 choose_data_offset(r10_bio
, rdev
);
1315 read_bio
->bi_bdev
= rdev
->bdev
;
1316 read_bio
->bi_end_io
= raid10_end_read_request
;
1317 read_bio
->bi_rw
= READ
| do_sync
;
1318 read_bio
->bi_private
= r10_bio
;
1320 if (max_sectors
< r10_bio
->sectors
) {
1321 /* Could not read all from this device, so we will
1322 * need another r10_bio.
1324 sectors_handled
= (r10_bio
->sectors
+ max_sectors
1326 r10_bio
->sectors
= max_sectors
;
1327 spin_lock_irq(&conf
->device_lock
);
1328 if (bio
->bi_phys_segments
== 0)
1329 bio
->bi_phys_segments
= 2;
1331 bio
->bi_phys_segments
++;
1332 spin_unlock(&conf
->device_lock
);
1333 /* Cannot call generic_make_request directly
1334 * as that will be queued in __generic_make_request
1335 * and subsequent mempool_alloc might block
1336 * waiting for it. so hand bio over to raid10d.
1338 reschedule_retry(r10_bio
);
1340 r10_bio
= mempool_alloc(conf
->r10bio_pool
, GFP_NOIO
);
1342 r10_bio
->master_bio
= bio
;
1343 r10_bio
->sectors
= bio_sectors(bio
) - sectors_handled
;
1345 r10_bio
->mddev
= mddev
;
1346 r10_bio
->sector
= bio
->bi_sector
+ sectors_handled
;
1349 generic_make_request(read_bio
);
1356 if (conf
->pending_count
>= max_queued_requests
) {
1357 md_wakeup_thread(mddev
->thread
);
1358 wait_event(conf
->wait_barrier
,
1359 conf
->pending_count
< max_queued_requests
);
1361 /* first select target devices under rcu_lock and
1362 * inc refcount on their rdev. Record them by setting
1364 * If there are known/acknowledged bad blocks on any device
1365 * on which we have seen a write error, we want to avoid
1366 * writing to those blocks. This potentially requires several
1367 * writes to write around the bad blocks. Each set of writes
1368 * gets its own r10_bio with a set of bios attached. The number
1369 * of r10_bios is recored in bio->bi_phys_segments just as with
1373 r10_bio
->read_slot
= -1; /* make sure repl_bio gets freed */
1374 raid10_find_phys(conf
, r10_bio
);
1376 blocked_rdev
= NULL
;
1378 max_sectors
= r10_bio
->sectors
;
1380 for (i
= 0; i
< conf
->copies
; i
++) {
1381 int d
= r10_bio
->devs
[i
].devnum
;
1382 struct md_rdev
*rdev
= rcu_dereference(conf
->mirrors
[d
].rdev
);
1383 struct md_rdev
*rrdev
= rcu_dereference(
1384 conf
->mirrors
[d
].replacement
);
1387 if (rdev
&& unlikely(test_bit(Blocked
, &rdev
->flags
))) {
1388 atomic_inc(&rdev
->nr_pending
);
1389 blocked_rdev
= rdev
;
1392 if (rrdev
&& unlikely(test_bit(Blocked
, &rrdev
->flags
))) {
1393 atomic_inc(&rrdev
->nr_pending
);
1394 blocked_rdev
= rrdev
;
1397 if (rdev
&& (test_bit(Faulty
, &rdev
->flags
)
1398 || test_bit(Unmerged
, &rdev
->flags
)))
1400 if (rrdev
&& (test_bit(Faulty
, &rrdev
->flags
)
1401 || test_bit(Unmerged
, &rrdev
->flags
)))
1404 r10_bio
->devs
[i
].bio
= NULL
;
1405 r10_bio
->devs
[i
].repl_bio
= NULL
;
1407 if (!rdev
&& !rrdev
) {
1408 set_bit(R10BIO_Degraded
, &r10_bio
->state
);
1411 if (rdev
&& test_bit(WriteErrorSeen
, &rdev
->flags
)) {
1413 sector_t dev_sector
= r10_bio
->devs
[i
].addr
;
1417 is_bad
= is_badblock(rdev
, dev_sector
,
1419 &first_bad
, &bad_sectors
);
1421 /* Mustn't write here until the bad block
1424 atomic_inc(&rdev
->nr_pending
);
1425 set_bit(BlockedBadBlocks
, &rdev
->flags
);
1426 blocked_rdev
= rdev
;
1429 if (is_bad
&& first_bad
<= dev_sector
) {
1430 /* Cannot write here at all */
1431 bad_sectors
-= (dev_sector
- first_bad
);
1432 if (bad_sectors
< max_sectors
)
1433 /* Mustn't write more than bad_sectors
1434 * to other devices yet
1436 max_sectors
= bad_sectors
;
1437 /* We don't set R10BIO_Degraded as that
1438 * only applies if the disk is missing,
1439 * so it might be re-added, and we want to
1440 * know to recover this chunk.
1441 * In this case the device is here, and the
1442 * fact that this chunk is not in-sync is
1443 * recorded in the bad block log.
1448 int good_sectors
= first_bad
- dev_sector
;
1449 if (good_sectors
< max_sectors
)
1450 max_sectors
= good_sectors
;
1454 r10_bio
->devs
[i
].bio
= bio
;
1455 atomic_inc(&rdev
->nr_pending
);
1458 r10_bio
->devs
[i
].repl_bio
= bio
;
1459 atomic_inc(&rrdev
->nr_pending
);
1464 if (unlikely(blocked_rdev
)) {
1465 /* Have to wait for this device to get unblocked, then retry */
1469 for (j
= 0; j
< i
; j
++) {
1470 if (r10_bio
->devs
[j
].bio
) {
1471 d
= r10_bio
->devs
[j
].devnum
;
1472 rdev_dec_pending(conf
->mirrors
[d
].rdev
, mddev
);
1474 if (r10_bio
->devs
[j
].repl_bio
) {
1475 struct md_rdev
*rdev
;
1476 d
= r10_bio
->devs
[j
].devnum
;
1477 rdev
= conf
->mirrors
[d
].replacement
;
1479 /* Race with remove_disk */
1481 rdev
= conf
->mirrors
[d
].rdev
;
1483 rdev_dec_pending(rdev
, mddev
);
1486 allow_barrier(conf
);
1487 md_wait_for_blocked_rdev(blocked_rdev
, mddev
);
1492 if (max_sectors
< r10_bio
->sectors
) {
1493 /* We are splitting this into multiple parts, so
1494 * we need to prepare for allocating another r10_bio.
1496 r10_bio
->sectors
= max_sectors
;
1497 spin_lock_irq(&conf
->device_lock
);
1498 if (bio
->bi_phys_segments
== 0)
1499 bio
->bi_phys_segments
= 2;
1501 bio
->bi_phys_segments
++;
1502 spin_unlock_irq(&conf
->device_lock
);
1504 sectors_handled
= r10_bio
->sector
+ max_sectors
- bio
->bi_sector
;
1506 atomic_set(&r10_bio
->remaining
, 1);
1507 bitmap_startwrite(mddev
->bitmap
, r10_bio
->sector
, r10_bio
->sectors
, 0);
1509 for (i
= 0; i
< conf
->copies
; i
++) {
1511 int d
= r10_bio
->devs
[i
].devnum
;
1512 if (r10_bio
->devs
[i
].bio
) {
1513 struct md_rdev
*rdev
= conf
->mirrors
[d
].rdev
;
1514 mbio
= bio_clone_mddev(bio
, GFP_NOIO
, mddev
);
1515 md_trim_bio(mbio
, r10_bio
->sector
- bio
->bi_sector
,
1517 r10_bio
->devs
[i
].bio
= mbio
;
1519 mbio
->bi_sector
= (r10_bio
->devs
[i
].addr
+
1520 choose_data_offset(r10_bio
,
1522 mbio
->bi_bdev
= rdev
->bdev
;
1523 mbio
->bi_end_io
= raid10_end_write_request
;
1525 WRITE
| do_sync
| do_fua
| do_discard
| do_same
;
1526 mbio
->bi_private
= r10_bio
;
1528 atomic_inc(&r10_bio
->remaining
);
1530 cb
= blk_check_plugged(raid10_unplug
, mddev
,
1533 plug
= container_of(cb
, struct raid10_plug_cb
,
1537 spin_lock_irqsave(&conf
->device_lock
, flags
);
1539 bio_list_add(&plug
->pending
, mbio
);
1540 plug
->pending_cnt
++;
1542 bio_list_add(&conf
->pending_bio_list
, mbio
);
1543 conf
->pending_count
++;
1545 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1547 md_wakeup_thread(mddev
->thread
);
1550 if (r10_bio
->devs
[i
].repl_bio
) {
1551 struct md_rdev
*rdev
= conf
->mirrors
[d
].replacement
;
1553 /* Replacement just got moved to main 'rdev' */
1555 rdev
= conf
->mirrors
[d
].rdev
;
1557 mbio
= bio_clone_mddev(bio
, GFP_NOIO
, mddev
);
1558 md_trim_bio(mbio
, r10_bio
->sector
- bio
->bi_sector
,
1560 r10_bio
->devs
[i
].repl_bio
= mbio
;
1562 mbio
->bi_sector
= (r10_bio
->devs
[i
].addr
+
1565 mbio
->bi_bdev
= rdev
->bdev
;
1566 mbio
->bi_end_io
= raid10_end_write_request
;
1568 WRITE
| do_sync
| do_fua
| do_discard
| do_same
;
1569 mbio
->bi_private
= r10_bio
;
1571 atomic_inc(&r10_bio
->remaining
);
1572 spin_lock_irqsave(&conf
->device_lock
, flags
);
1573 bio_list_add(&conf
->pending_bio_list
, mbio
);
1574 conf
->pending_count
++;
1575 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1576 if (!mddev_check_plugged(mddev
))
1577 md_wakeup_thread(mddev
->thread
);
1581 /* Don't remove the bias on 'remaining' (one_write_done) until
1582 * after checking if we need to go around again.
1585 if (sectors_handled
< bio_sectors(bio
)) {
1586 one_write_done(r10_bio
);
1587 /* We need another r10_bio. It has already been counted
1588 * in bio->bi_phys_segments.
1590 r10_bio
= mempool_alloc(conf
->r10bio_pool
, GFP_NOIO
);
1592 r10_bio
->master_bio
= bio
;
1593 r10_bio
->sectors
= bio_sectors(bio
) - sectors_handled
;
1595 r10_bio
->mddev
= mddev
;
1596 r10_bio
->sector
= bio
->bi_sector
+ sectors_handled
;
1600 one_write_done(r10_bio
);
1602 /* In case raid10d snuck in to freeze_array */
1603 wake_up(&conf
->wait_barrier
);
1606 static void status(struct seq_file
*seq
, struct mddev
*mddev
)
1608 struct r10conf
*conf
= mddev
->private;
1611 if (conf
->geo
.near_copies
< conf
->geo
.raid_disks
)
1612 seq_printf(seq
, " %dK chunks", mddev
->chunk_sectors
/ 2);
1613 if (conf
->geo
.near_copies
> 1)
1614 seq_printf(seq
, " %d near-copies", conf
->geo
.near_copies
);
1615 if (conf
->geo
.far_copies
> 1) {
1616 if (conf
->geo
.far_offset
)
1617 seq_printf(seq
, " %d offset-copies", conf
->geo
.far_copies
);
1619 seq_printf(seq
, " %d far-copies", conf
->geo
.far_copies
);
1621 seq_printf(seq
, " [%d/%d] [", conf
->geo
.raid_disks
,
1622 conf
->geo
.raid_disks
- mddev
->degraded
);
1623 for (i
= 0; i
< conf
->geo
.raid_disks
; i
++)
1624 seq_printf(seq
, "%s",
1625 conf
->mirrors
[i
].rdev
&&
1626 test_bit(In_sync
, &conf
->mirrors
[i
].rdev
->flags
) ? "U" : "_");
1627 seq_printf(seq
, "]");
1630 /* check if there are enough drives for
1631 * every block to appear on atleast one.
1632 * Don't consider the device numbered 'ignore'
1633 * as we might be about to remove it.
1635 static int _enough(struct r10conf
*conf
, struct geom
*geo
, int ignore
)
1640 int n
= conf
->copies
;
1644 if (conf
->mirrors
[this].rdev
&&
1647 this = (this+1) % geo
->raid_disks
;
1651 first
= (first
+ geo
->near_copies
) % geo
->raid_disks
;
1652 } while (first
!= 0);
1656 static int enough(struct r10conf
*conf
, int ignore
)
1658 return _enough(conf
, &conf
->geo
, ignore
) &&
1659 _enough(conf
, &conf
->prev
, ignore
);
1662 static void error(struct mddev
*mddev
, struct md_rdev
*rdev
)
1664 char b
[BDEVNAME_SIZE
];
1665 struct r10conf
*conf
= mddev
->private;
1668 * If it is not operational, then we have already marked it as dead
1669 * else if it is the last working disks, ignore the error, let the
1670 * next level up know.
1671 * else mark the drive as failed
1673 if (test_bit(In_sync
, &rdev
->flags
)
1674 && !enough(conf
, rdev
->raid_disk
))
1676 * Don't fail the drive, just return an IO error.
1679 if (test_and_clear_bit(In_sync
, &rdev
->flags
)) {
1680 unsigned long flags
;
1681 spin_lock_irqsave(&conf
->device_lock
, flags
);
1683 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1685 * if recovery is running, make sure it aborts.
1687 set_bit(MD_RECOVERY_INTR
, &mddev
->recovery
);
1689 set_bit(Blocked
, &rdev
->flags
);
1690 set_bit(Faulty
, &rdev
->flags
);
1691 set_bit(MD_CHANGE_DEVS
, &mddev
->flags
);
1693 "md/raid10:%s: Disk failure on %s, disabling device.\n"
1694 "md/raid10:%s: Operation continuing on %d devices.\n",
1695 mdname(mddev
), bdevname(rdev
->bdev
, b
),
1696 mdname(mddev
), conf
->geo
.raid_disks
- mddev
->degraded
);
1699 static void print_conf(struct r10conf
*conf
)
1702 struct raid10_info
*tmp
;
1704 printk(KERN_DEBUG
"RAID10 conf printout:\n");
1706 printk(KERN_DEBUG
"(!conf)\n");
1709 printk(KERN_DEBUG
" --- wd:%d rd:%d\n", conf
->geo
.raid_disks
- conf
->mddev
->degraded
,
1710 conf
->geo
.raid_disks
);
1712 for (i
= 0; i
< conf
->geo
.raid_disks
; i
++) {
1713 char b
[BDEVNAME_SIZE
];
1714 tmp
= conf
->mirrors
+ i
;
1716 printk(KERN_DEBUG
" disk %d, wo:%d, o:%d, dev:%s\n",
1717 i
, !test_bit(In_sync
, &tmp
->rdev
->flags
),
1718 !test_bit(Faulty
, &tmp
->rdev
->flags
),
1719 bdevname(tmp
->rdev
->bdev
,b
));
1723 static void close_sync(struct r10conf
*conf
)
1726 allow_barrier(conf
);
1728 mempool_destroy(conf
->r10buf_pool
);
1729 conf
->r10buf_pool
= NULL
;
1732 static int raid10_spare_active(struct mddev
*mddev
)
1735 struct r10conf
*conf
= mddev
->private;
1736 struct raid10_info
*tmp
;
1738 unsigned long flags
;
1741 * Find all non-in_sync disks within the RAID10 configuration
1742 * and mark them in_sync
1744 for (i
= 0; i
< conf
->geo
.raid_disks
; i
++) {
1745 tmp
= conf
->mirrors
+ i
;
1746 if (tmp
->replacement
1747 && tmp
->replacement
->recovery_offset
== MaxSector
1748 && !test_bit(Faulty
, &tmp
->replacement
->flags
)
1749 && !test_and_set_bit(In_sync
, &tmp
->replacement
->flags
)) {
1750 /* Replacement has just become active */
1752 || !test_and_clear_bit(In_sync
, &tmp
->rdev
->flags
))
1755 /* Replaced device not technically faulty,
1756 * but we need to be sure it gets removed
1757 * and never re-added.
1759 set_bit(Faulty
, &tmp
->rdev
->flags
);
1760 sysfs_notify_dirent_safe(
1761 tmp
->rdev
->sysfs_state
);
1763 sysfs_notify_dirent_safe(tmp
->replacement
->sysfs_state
);
1764 } else if (tmp
->rdev
1765 && !test_bit(Faulty
, &tmp
->rdev
->flags
)
1766 && !test_and_set_bit(In_sync
, &tmp
->rdev
->flags
)) {
1768 sysfs_notify_dirent_safe(tmp
->rdev
->sysfs_state
);
1771 spin_lock_irqsave(&conf
->device_lock
, flags
);
1772 mddev
->degraded
-= count
;
1773 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
1780 static int raid10_add_disk(struct mddev
*mddev
, struct md_rdev
*rdev
)
1782 struct r10conf
*conf
= mddev
->private;
1786 int last
= conf
->geo
.raid_disks
- 1;
1787 struct request_queue
*q
= bdev_get_queue(rdev
->bdev
);
1789 if (mddev
->recovery_cp
< MaxSector
)
1790 /* only hot-add to in-sync arrays, as recovery is
1791 * very different from resync
1794 if (rdev
->saved_raid_disk
< 0 && !_enough(conf
, &conf
->prev
, -1))
1797 if (rdev
->raid_disk
>= 0)
1798 first
= last
= rdev
->raid_disk
;
1800 if (q
->merge_bvec_fn
) {
1801 set_bit(Unmerged
, &rdev
->flags
);
1802 mddev
->merge_check_needed
= 1;
1805 if (rdev
->saved_raid_disk
>= first
&&
1806 conf
->mirrors
[rdev
->saved_raid_disk
].rdev
== NULL
)
1807 mirror
= rdev
->saved_raid_disk
;
1810 for ( ; mirror
<= last
; mirror
++) {
1811 struct raid10_info
*p
= &conf
->mirrors
[mirror
];
1812 if (p
->recovery_disabled
== mddev
->recovery_disabled
)
1815 if (!test_bit(WantReplacement
, &p
->rdev
->flags
) ||
1816 p
->replacement
!= NULL
)
1818 clear_bit(In_sync
, &rdev
->flags
);
1819 set_bit(Replacement
, &rdev
->flags
);
1820 rdev
->raid_disk
= mirror
;
1822 disk_stack_limits(mddev
->gendisk
, rdev
->bdev
,
1823 rdev
->data_offset
<< 9);
1825 rcu_assign_pointer(p
->replacement
, rdev
);
1829 disk_stack_limits(mddev
->gendisk
, rdev
->bdev
,
1830 rdev
->data_offset
<< 9);
1832 p
->head_position
= 0;
1833 p
->recovery_disabled
= mddev
->recovery_disabled
- 1;
1834 rdev
->raid_disk
= mirror
;
1836 if (rdev
->saved_raid_disk
!= mirror
)
1838 rcu_assign_pointer(p
->rdev
, rdev
);
1841 if (err
== 0 && test_bit(Unmerged
, &rdev
->flags
)) {
1842 /* Some requests might not have seen this new
1843 * merge_bvec_fn. We must wait for them to complete
1844 * before merging the device fully.
1845 * First we make sure any code which has tested
1846 * our function has submitted the request, then
1847 * we wait for all outstanding requests to complete.
1849 synchronize_sched();
1850 freeze_array(conf
, 0);
1851 unfreeze_array(conf
);
1852 clear_bit(Unmerged
, &rdev
->flags
);
1854 md_integrity_add_rdev(rdev
, mddev
);
1855 if (mddev
->queue
&& blk_queue_discard(bdev_get_queue(rdev
->bdev
)))
1856 queue_flag_set_unlocked(QUEUE_FLAG_DISCARD
, mddev
->queue
);
1862 static int raid10_remove_disk(struct mddev
*mddev
, struct md_rdev
*rdev
)
1864 struct r10conf
*conf
= mddev
->private;
1866 int number
= rdev
->raid_disk
;
1867 struct md_rdev
**rdevp
;
1868 struct raid10_info
*p
= conf
->mirrors
+ number
;
1871 if (rdev
== p
->rdev
)
1873 else if (rdev
== p
->replacement
)
1874 rdevp
= &p
->replacement
;
1878 if (test_bit(In_sync
, &rdev
->flags
) ||
1879 atomic_read(&rdev
->nr_pending
)) {
1883 /* Only remove faulty devices if recovery
1886 if (!test_bit(Faulty
, &rdev
->flags
) &&
1887 mddev
->recovery_disabled
!= p
->recovery_disabled
&&
1888 (!p
->replacement
|| p
->replacement
== rdev
) &&
1889 number
< conf
->geo
.raid_disks
&&
1896 if (atomic_read(&rdev
->nr_pending
)) {
1897 /* lost the race, try later */
1901 } else if (p
->replacement
) {
1902 /* We must have just cleared 'rdev' */
1903 p
->rdev
= p
->replacement
;
1904 clear_bit(Replacement
, &p
->replacement
->flags
);
1905 smp_mb(); /* Make sure other CPUs may see both as identical
1906 * but will never see neither -- if they are careful.
1908 p
->replacement
= NULL
;
1909 clear_bit(WantReplacement
, &rdev
->flags
);
1911 /* We might have just remove the Replacement as faulty
1912 * Clear the flag just in case
1914 clear_bit(WantReplacement
, &rdev
->flags
);
1916 err
= md_integrity_register(mddev
);
1925 static void end_sync_read(struct bio
*bio
, int error
)
1927 struct r10bio
*r10_bio
= bio
->bi_private
;
1928 struct r10conf
*conf
= r10_bio
->mddev
->private;
1931 if (bio
== r10_bio
->master_bio
) {
1932 /* this is a reshape read */
1933 d
= r10_bio
->read_slot
; /* really the read dev */
1935 d
= find_bio_disk(conf
, r10_bio
, bio
, NULL
, NULL
);
1937 if (test_bit(BIO_UPTODATE
, &bio
->bi_flags
))
1938 set_bit(R10BIO_Uptodate
, &r10_bio
->state
);
1940 /* The write handler will notice the lack of
1941 * R10BIO_Uptodate and record any errors etc
1943 atomic_add(r10_bio
->sectors
,
1944 &conf
->mirrors
[d
].rdev
->corrected_errors
);
1946 /* for reconstruct, we always reschedule after a read.
1947 * for resync, only after all reads
1949 rdev_dec_pending(conf
->mirrors
[d
].rdev
, conf
->mddev
);
1950 if (test_bit(R10BIO_IsRecover
, &r10_bio
->state
) ||
1951 atomic_dec_and_test(&r10_bio
->remaining
)) {
1952 /* we have read all the blocks,
1953 * do the comparison in process context in raid10d
1955 reschedule_retry(r10_bio
);
1959 static void end_sync_request(struct r10bio
*r10_bio
)
1961 struct mddev
*mddev
= r10_bio
->mddev
;
1963 while (atomic_dec_and_test(&r10_bio
->remaining
)) {
1964 if (r10_bio
->master_bio
== NULL
) {
1965 /* the primary of several recovery bios */
1966 sector_t s
= r10_bio
->sectors
;
1967 if (test_bit(R10BIO_MadeGood
, &r10_bio
->state
) ||
1968 test_bit(R10BIO_WriteError
, &r10_bio
->state
))
1969 reschedule_retry(r10_bio
);
1972 md_done_sync(mddev
, s
, 1);
1975 struct r10bio
*r10_bio2
= (struct r10bio
*)r10_bio
->master_bio
;
1976 if (test_bit(R10BIO_MadeGood
, &r10_bio
->state
) ||
1977 test_bit(R10BIO_WriteError
, &r10_bio
->state
))
1978 reschedule_retry(r10_bio
);
1986 static void end_sync_write(struct bio
*bio
, int error
)
1988 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
1989 struct r10bio
*r10_bio
= bio
->bi_private
;
1990 struct mddev
*mddev
= r10_bio
->mddev
;
1991 struct r10conf
*conf
= mddev
->private;
1997 struct md_rdev
*rdev
= NULL
;
1999 d
= find_bio_disk(conf
, r10_bio
, bio
, &slot
, &repl
);
2001 rdev
= conf
->mirrors
[d
].replacement
;
2003 rdev
= conf
->mirrors
[d
].rdev
;
2007 md_error(mddev
, rdev
);
2009 set_bit(WriteErrorSeen
, &rdev
->flags
);
2010 if (!test_and_set_bit(WantReplacement
, &rdev
->flags
))
2011 set_bit(MD_RECOVERY_NEEDED
,
2012 &rdev
->mddev
->recovery
);
2013 set_bit(R10BIO_WriteError
, &r10_bio
->state
);
2015 } else if (is_badblock(rdev
,
2016 r10_bio
->devs
[slot
].addr
,
2018 &first_bad
, &bad_sectors
))
2019 set_bit(R10BIO_MadeGood
, &r10_bio
->state
);
2021 rdev_dec_pending(rdev
, mddev
);
2023 end_sync_request(r10_bio
);
2027 * Note: sync and recover and handled very differently for raid10
2028 * This code is for resync.
2029 * For resync, we read through virtual addresses and read all blocks.
2030 * If there is any error, we schedule a write. The lowest numbered
2031 * drive is authoritative.
2032 * However requests come for physical address, so we need to map.
2033 * For every physical address there are raid_disks/copies virtual addresses,
2034 * which is always are least one, but is not necessarly an integer.
2035 * This means that a physical address can span multiple chunks, so we may
2036 * have to submit multiple io requests for a single sync request.
2039 * We check if all blocks are in-sync and only write to blocks that
2042 static void sync_request_write(struct mddev
*mddev
, struct r10bio
*r10_bio
)
2044 struct r10conf
*conf
= mddev
->private;
2046 struct bio
*tbio
, *fbio
;
2049 atomic_set(&r10_bio
->remaining
, 1);
2051 /* find the first device with a block */
2052 for (i
=0; i
<conf
->copies
; i
++)
2053 if (test_bit(BIO_UPTODATE
, &r10_bio
->devs
[i
].bio
->bi_flags
))
2056 if (i
== conf
->copies
)
2060 fbio
= r10_bio
->devs
[i
].bio
;
2062 vcnt
= (r10_bio
->sectors
+ (PAGE_SIZE
>> 9) - 1) >> (PAGE_SHIFT
- 9);
2063 /* now find blocks with errors */
2064 for (i
=0 ; i
< conf
->copies
; i
++) {
2067 tbio
= r10_bio
->devs
[i
].bio
;
2069 if (tbio
->bi_end_io
!= end_sync_read
)
2073 if (test_bit(BIO_UPTODATE
, &r10_bio
->devs
[i
].bio
->bi_flags
)) {
2074 /* We know that the bi_io_vec layout is the same for
2075 * both 'first' and 'i', so we just compare them.
2076 * All vec entries are PAGE_SIZE;
2078 for (j
= 0; j
< vcnt
; j
++)
2079 if (memcmp(page_address(fbio
->bi_io_vec
[j
].bv_page
),
2080 page_address(tbio
->bi_io_vec
[j
].bv_page
),
2081 fbio
->bi_io_vec
[j
].bv_len
))
2085 atomic64_add(r10_bio
->sectors
, &mddev
->resync_mismatches
);
2086 if (test_bit(MD_RECOVERY_CHECK
, &mddev
->recovery
))
2087 /* Don't fix anything. */
2090 /* Ok, we need to write this bio, either to correct an
2091 * inconsistency or to correct an unreadable block.
2092 * First we need to fixup bv_offset, bv_len and
2093 * bi_vecs, as the read request might have corrupted these
2097 tbio
->bi_vcnt
= vcnt
;
2098 tbio
->bi_size
= r10_bio
->sectors
<< 9;
2099 tbio
->bi_rw
= WRITE
;
2100 tbio
->bi_private
= r10_bio
;
2101 tbio
->bi_sector
= r10_bio
->devs
[i
].addr
;
2103 for (j
=0; j
< vcnt
; j
++) {
2104 tbio
->bi_io_vec
[j
].bv_offset
= 0;
2105 tbio
->bi_io_vec
[j
].bv_len
= PAGE_SIZE
;
2107 memcpy(page_address(tbio
->bi_io_vec
[j
].bv_page
),
2108 page_address(fbio
->bi_io_vec
[j
].bv_page
),
2111 tbio
->bi_end_io
= end_sync_write
;
2113 d
= r10_bio
->devs
[i
].devnum
;
2114 atomic_inc(&conf
->mirrors
[d
].rdev
->nr_pending
);
2115 atomic_inc(&r10_bio
->remaining
);
2116 md_sync_acct(conf
->mirrors
[d
].rdev
->bdev
, bio_sectors(tbio
));
2118 tbio
->bi_sector
+= conf
->mirrors
[d
].rdev
->data_offset
;
2119 tbio
->bi_bdev
= conf
->mirrors
[d
].rdev
->bdev
;
2120 generic_make_request(tbio
);
2123 /* Now write out to any replacement devices
2126 for (i
= 0; i
< conf
->copies
; i
++) {
2129 tbio
= r10_bio
->devs
[i
].repl_bio
;
2130 if (!tbio
|| !tbio
->bi_end_io
)
2132 if (r10_bio
->devs
[i
].bio
->bi_end_io
!= end_sync_write
2133 && r10_bio
->devs
[i
].bio
!= fbio
)
2134 for (j
= 0; j
< vcnt
; j
++)
2135 memcpy(page_address(tbio
->bi_io_vec
[j
].bv_page
),
2136 page_address(fbio
->bi_io_vec
[j
].bv_page
),
2138 d
= r10_bio
->devs
[i
].devnum
;
2139 atomic_inc(&r10_bio
->remaining
);
2140 md_sync_acct(conf
->mirrors
[d
].replacement
->bdev
,
2142 generic_make_request(tbio
);
2146 if (atomic_dec_and_test(&r10_bio
->remaining
)) {
2147 md_done_sync(mddev
, r10_bio
->sectors
, 1);
2153 * Now for the recovery code.
2154 * Recovery happens across physical sectors.
2155 * We recover all non-is_sync drives by finding the virtual address of
2156 * each, and then choose a working drive that also has that virt address.
2157 * There is a separate r10_bio for each non-in_sync drive.
2158 * Only the first two slots are in use. The first for reading,
2159 * The second for writing.
2162 static void fix_recovery_read_error(struct r10bio
*r10_bio
)
2164 /* We got a read error during recovery.
2165 * We repeat the read in smaller page-sized sections.
2166 * If a read succeeds, write it to the new device or record
2167 * a bad block if we cannot.
2168 * If a read fails, record a bad block on both old and
2171 struct mddev
*mddev
= r10_bio
->mddev
;
2172 struct r10conf
*conf
= mddev
->private;
2173 struct bio
*bio
= r10_bio
->devs
[0].bio
;
2175 int sectors
= r10_bio
->sectors
;
2177 int dr
= r10_bio
->devs
[0].devnum
;
2178 int dw
= r10_bio
->devs
[1].devnum
;
2182 struct md_rdev
*rdev
;
2186 if (s
> (PAGE_SIZE
>>9))
2189 rdev
= conf
->mirrors
[dr
].rdev
;
2190 addr
= r10_bio
->devs
[0].addr
+ sect
,
2191 ok
= sync_page_io(rdev
,
2194 bio
->bi_io_vec
[idx
].bv_page
,
2197 rdev
= conf
->mirrors
[dw
].rdev
;
2198 addr
= r10_bio
->devs
[1].addr
+ sect
;
2199 ok
= sync_page_io(rdev
,
2202 bio
->bi_io_vec
[idx
].bv_page
,
2205 set_bit(WriteErrorSeen
, &rdev
->flags
);
2206 if (!test_and_set_bit(WantReplacement
,
2208 set_bit(MD_RECOVERY_NEEDED
,
2209 &rdev
->mddev
->recovery
);
2213 /* We don't worry if we cannot set a bad block -
2214 * it really is bad so there is no loss in not
2217 rdev_set_badblocks(rdev
, addr
, s
, 0);
2219 if (rdev
!= conf
->mirrors
[dw
].rdev
) {
2220 /* need bad block on destination too */
2221 struct md_rdev
*rdev2
= conf
->mirrors
[dw
].rdev
;
2222 addr
= r10_bio
->devs
[1].addr
+ sect
;
2223 ok
= rdev_set_badblocks(rdev2
, addr
, s
, 0);
2225 /* just abort the recovery */
2227 "md/raid10:%s: recovery aborted"
2228 " due to read error\n",
2231 conf
->mirrors
[dw
].recovery_disabled
2232 = mddev
->recovery_disabled
;
2233 set_bit(MD_RECOVERY_INTR
,
2246 static void recovery_request_write(struct mddev
*mddev
, struct r10bio
*r10_bio
)
2248 struct r10conf
*conf
= mddev
->private;
2250 struct bio
*wbio
, *wbio2
;
2252 if (!test_bit(R10BIO_Uptodate
, &r10_bio
->state
)) {
2253 fix_recovery_read_error(r10_bio
);
2254 end_sync_request(r10_bio
);
2259 * share the pages with the first bio
2260 * and submit the write request
2262 d
= r10_bio
->devs
[1].devnum
;
2263 wbio
= r10_bio
->devs
[1].bio
;
2264 wbio2
= r10_bio
->devs
[1].repl_bio
;
2265 if (wbio
->bi_end_io
) {
2266 atomic_inc(&conf
->mirrors
[d
].rdev
->nr_pending
);
2267 md_sync_acct(conf
->mirrors
[d
].rdev
->bdev
, bio_sectors(wbio
));
2268 generic_make_request(wbio
);
2270 if (wbio2
&& wbio2
->bi_end_io
) {
2271 atomic_inc(&conf
->mirrors
[d
].replacement
->nr_pending
);
2272 md_sync_acct(conf
->mirrors
[d
].replacement
->bdev
,
2273 bio_sectors(wbio2
));
2274 generic_make_request(wbio2
);
2280 * Used by fix_read_error() to decay the per rdev read_errors.
2281 * We halve the read error count for every hour that has elapsed
2282 * since the last recorded read error.
2285 static void check_decay_read_errors(struct mddev
*mddev
, struct md_rdev
*rdev
)
2287 struct timespec cur_time_mon
;
2288 unsigned long hours_since_last
;
2289 unsigned int read_errors
= atomic_read(&rdev
->read_errors
);
2291 ktime_get_ts(&cur_time_mon
);
2293 if (rdev
->last_read_error
.tv_sec
== 0 &&
2294 rdev
->last_read_error
.tv_nsec
== 0) {
2295 /* first time we've seen a read error */
2296 rdev
->last_read_error
= cur_time_mon
;
2300 hours_since_last
= (cur_time_mon
.tv_sec
-
2301 rdev
->last_read_error
.tv_sec
) / 3600;
2303 rdev
->last_read_error
= cur_time_mon
;
2306 * if hours_since_last is > the number of bits in read_errors
2307 * just set read errors to 0. We do this to avoid
2308 * overflowing the shift of read_errors by hours_since_last.
2310 if (hours_since_last
>= 8 * sizeof(read_errors
))
2311 atomic_set(&rdev
->read_errors
, 0);
2313 atomic_set(&rdev
->read_errors
, read_errors
>> hours_since_last
);
2316 static int r10_sync_page_io(struct md_rdev
*rdev
, sector_t sector
,
2317 int sectors
, struct page
*page
, int rw
)
2322 if (is_badblock(rdev
, sector
, sectors
, &first_bad
, &bad_sectors
)
2323 && (rw
== READ
|| test_bit(WriteErrorSeen
, &rdev
->flags
)))
2325 if (sync_page_io(rdev
, sector
, sectors
<< 9, page
, rw
, false))
2329 set_bit(WriteErrorSeen
, &rdev
->flags
);
2330 if (!test_and_set_bit(WantReplacement
, &rdev
->flags
))
2331 set_bit(MD_RECOVERY_NEEDED
,
2332 &rdev
->mddev
->recovery
);
2334 /* need to record an error - either for the block or the device */
2335 if (!rdev_set_badblocks(rdev
, sector
, sectors
, 0))
2336 md_error(rdev
->mddev
, rdev
);
2341 * This is a kernel thread which:
2343 * 1. Retries failed read operations on working mirrors.
2344 * 2. Updates the raid superblock when problems encounter.
2345 * 3. Performs writes following reads for array synchronising.
2348 static void fix_read_error(struct r10conf
*conf
, struct mddev
*mddev
, struct r10bio
*r10_bio
)
2350 int sect
= 0; /* Offset from r10_bio->sector */
2351 int sectors
= r10_bio
->sectors
;
2352 struct md_rdev
*rdev
;
2353 int max_read_errors
= atomic_read(&mddev
->max_corr_read_errors
);
2354 int d
= r10_bio
->devs
[r10_bio
->read_slot
].devnum
;
2356 /* still own a reference to this rdev, so it cannot
2357 * have been cleared recently.
2359 rdev
= conf
->mirrors
[d
].rdev
;
2361 if (test_bit(Faulty
, &rdev
->flags
))
2362 /* drive has already been failed, just ignore any
2363 more fix_read_error() attempts */
2366 check_decay_read_errors(mddev
, rdev
);
2367 atomic_inc(&rdev
->read_errors
);
2368 if (atomic_read(&rdev
->read_errors
) > max_read_errors
) {
2369 char b
[BDEVNAME_SIZE
];
2370 bdevname(rdev
->bdev
, b
);
2373 "md/raid10:%s: %s: Raid device exceeded "
2374 "read_error threshold [cur %d:max %d]\n",
2376 atomic_read(&rdev
->read_errors
), max_read_errors
);
2378 "md/raid10:%s: %s: Failing raid device\n",
2380 md_error(mddev
, conf
->mirrors
[d
].rdev
);
2381 r10_bio
->devs
[r10_bio
->read_slot
].bio
= IO_BLOCKED
;
2387 int sl
= r10_bio
->read_slot
;
2391 if (s
> (PAGE_SIZE
>>9))
2399 d
= r10_bio
->devs
[sl
].devnum
;
2400 rdev
= rcu_dereference(conf
->mirrors
[d
].rdev
);
2402 !test_bit(Unmerged
, &rdev
->flags
) &&
2403 test_bit(In_sync
, &rdev
->flags
) &&
2404 is_badblock(rdev
, r10_bio
->devs
[sl
].addr
+ sect
, s
,
2405 &first_bad
, &bad_sectors
) == 0) {
2406 atomic_inc(&rdev
->nr_pending
);
2408 success
= sync_page_io(rdev
,
2409 r10_bio
->devs
[sl
].addr
+
2412 conf
->tmppage
, READ
, false);
2413 rdev_dec_pending(rdev
, mddev
);
2419 if (sl
== conf
->copies
)
2421 } while (!success
&& sl
!= r10_bio
->read_slot
);
2425 /* Cannot read from anywhere, just mark the block
2426 * as bad on the first device to discourage future
2429 int dn
= r10_bio
->devs
[r10_bio
->read_slot
].devnum
;
2430 rdev
= conf
->mirrors
[dn
].rdev
;
2432 if (!rdev_set_badblocks(
2434 r10_bio
->devs
[r10_bio
->read_slot
].addr
2437 md_error(mddev
, rdev
);
2438 r10_bio
->devs
[r10_bio
->read_slot
].bio
2445 /* write it back and re-read */
2447 while (sl
!= r10_bio
->read_slot
) {
2448 char b
[BDEVNAME_SIZE
];
2453 d
= r10_bio
->devs
[sl
].devnum
;
2454 rdev
= rcu_dereference(conf
->mirrors
[d
].rdev
);
2456 test_bit(Unmerged
, &rdev
->flags
) ||
2457 !test_bit(In_sync
, &rdev
->flags
))
2460 atomic_inc(&rdev
->nr_pending
);
2462 if (r10_sync_page_io(rdev
,
2463 r10_bio
->devs
[sl
].addr
+
2465 s
, conf
->tmppage
, WRITE
)
2467 /* Well, this device is dead */
2469 "md/raid10:%s: read correction "
2471 " (%d sectors at %llu on %s)\n",
2473 (unsigned long long)(
2475 choose_data_offset(r10_bio
,
2477 bdevname(rdev
->bdev
, b
));
2478 printk(KERN_NOTICE
"md/raid10:%s: %s: failing "
2481 bdevname(rdev
->bdev
, b
));
2483 rdev_dec_pending(rdev
, mddev
);
2487 while (sl
!= r10_bio
->read_slot
) {
2488 char b
[BDEVNAME_SIZE
];
2493 d
= r10_bio
->devs
[sl
].devnum
;
2494 rdev
= rcu_dereference(conf
->mirrors
[d
].rdev
);
2496 !test_bit(In_sync
, &rdev
->flags
))
2499 atomic_inc(&rdev
->nr_pending
);
2501 switch (r10_sync_page_io(rdev
,
2502 r10_bio
->devs
[sl
].addr
+
2507 /* Well, this device is dead */
2509 "md/raid10:%s: unable to read back "
2511 " (%d sectors at %llu on %s)\n",
2513 (unsigned long long)(
2515 choose_data_offset(r10_bio
, rdev
)),
2516 bdevname(rdev
->bdev
, b
));
2517 printk(KERN_NOTICE
"md/raid10:%s: %s: failing "
2520 bdevname(rdev
->bdev
, b
));
2524 "md/raid10:%s: read error corrected"
2525 " (%d sectors at %llu on %s)\n",
2527 (unsigned long long)(
2529 choose_data_offset(r10_bio
, rdev
)),
2530 bdevname(rdev
->bdev
, b
));
2531 atomic_add(s
, &rdev
->corrected_errors
);
2534 rdev_dec_pending(rdev
, mddev
);
2544 static int narrow_write_error(struct r10bio
*r10_bio
, int i
)
2546 struct bio
*bio
= r10_bio
->master_bio
;
2547 struct mddev
*mddev
= r10_bio
->mddev
;
2548 struct r10conf
*conf
= mddev
->private;
2549 struct md_rdev
*rdev
= conf
->mirrors
[r10_bio
->devs
[i
].devnum
].rdev
;
2550 /* bio has the data to be written to slot 'i' where
2551 * we just recently had a write error.
2552 * We repeatedly clone the bio and trim down to one block,
2553 * then try the write. Where the write fails we record
2555 * It is conceivable that the bio doesn't exactly align with
2556 * blocks. We must handle this.
2558 * We currently own a reference to the rdev.
2564 int sect_to_write
= r10_bio
->sectors
;
2567 if (rdev
->badblocks
.shift
< 0)
2570 block_sectors
= 1 << rdev
->badblocks
.shift
;
2571 sector
= r10_bio
->sector
;
2572 sectors
= ((r10_bio
->sector
+ block_sectors
)
2573 & ~(sector_t
)(block_sectors
- 1))
2576 while (sect_to_write
) {
2578 if (sectors
> sect_to_write
)
2579 sectors
= sect_to_write
;
2580 /* Write at 'sector' for 'sectors' */
2581 wbio
= bio_clone_mddev(bio
, GFP_NOIO
, mddev
);
2582 md_trim_bio(wbio
, sector
- bio
->bi_sector
, sectors
);
2583 wbio
->bi_sector
= (r10_bio
->devs
[i
].addr
+
2584 choose_data_offset(r10_bio
, rdev
) +
2585 (sector
- r10_bio
->sector
));
2586 wbio
->bi_bdev
= rdev
->bdev
;
2587 if (submit_bio_wait(WRITE
, wbio
) == 0)
2589 ok
= rdev_set_badblocks(rdev
, sector
,
2594 sect_to_write
-= sectors
;
2596 sectors
= block_sectors
;
2601 static void handle_read_error(struct mddev
*mddev
, struct r10bio
*r10_bio
)
2603 int slot
= r10_bio
->read_slot
;
2605 struct r10conf
*conf
= mddev
->private;
2606 struct md_rdev
*rdev
= r10_bio
->devs
[slot
].rdev
;
2607 char b
[BDEVNAME_SIZE
];
2608 unsigned long do_sync
;
2611 /* we got a read error. Maybe the drive is bad. Maybe just
2612 * the block and we can fix it.
2613 * We freeze all other IO, and try reading the block from
2614 * other devices. When we find one, we re-write
2615 * and check it that fixes the read error.
2616 * This is all done synchronously while the array is
2619 bio
= r10_bio
->devs
[slot
].bio
;
2620 bdevname(bio
->bi_bdev
, b
);
2622 r10_bio
->devs
[slot
].bio
= NULL
;
2624 if (mddev
->ro
== 0) {
2625 freeze_array(conf
, 1);
2626 fix_read_error(conf
, mddev
, r10_bio
);
2627 unfreeze_array(conf
);
2629 r10_bio
->devs
[slot
].bio
= IO_BLOCKED
;
2631 rdev_dec_pending(rdev
, mddev
);
2634 rdev
= read_balance(conf
, r10_bio
, &max_sectors
);
2636 printk(KERN_ALERT
"md/raid10:%s: %s: unrecoverable I/O"
2637 " read error for block %llu\n",
2639 (unsigned long long)r10_bio
->sector
);
2640 raid_end_bio_io(r10_bio
);
2644 do_sync
= (r10_bio
->master_bio
->bi_rw
& REQ_SYNC
);
2645 slot
= r10_bio
->read_slot
;
2648 "md/raid10:%s: %s: redirecting "
2649 "sector %llu to another mirror\n",
2651 bdevname(rdev
->bdev
, b
),
2652 (unsigned long long)r10_bio
->sector
);
2653 bio
= bio_clone_mddev(r10_bio
->master_bio
,
2656 r10_bio
->sector
- bio
->bi_sector
,
2658 r10_bio
->devs
[slot
].bio
= bio
;
2659 r10_bio
->devs
[slot
].rdev
= rdev
;
2660 bio
->bi_sector
= r10_bio
->devs
[slot
].addr
2661 + choose_data_offset(r10_bio
, rdev
);
2662 bio
->bi_bdev
= rdev
->bdev
;
2663 bio
->bi_rw
= READ
| do_sync
;
2664 bio
->bi_private
= r10_bio
;
2665 bio
->bi_end_io
= raid10_end_read_request
;
2666 if (max_sectors
< r10_bio
->sectors
) {
2667 /* Drat - have to split this up more */
2668 struct bio
*mbio
= r10_bio
->master_bio
;
2669 int sectors_handled
=
2670 r10_bio
->sector
+ max_sectors
2672 r10_bio
->sectors
= max_sectors
;
2673 spin_lock_irq(&conf
->device_lock
);
2674 if (mbio
->bi_phys_segments
== 0)
2675 mbio
->bi_phys_segments
= 2;
2677 mbio
->bi_phys_segments
++;
2678 spin_unlock_irq(&conf
->device_lock
);
2679 generic_make_request(bio
);
2681 r10_bio
= mempool_alloc(conf
->r10bio_pool
,
2683 r10_bio
->master_bio
= mbio
;
2684 r10_bio
->sectors
= bio_sectors(mbio
) - sectors_handled
;
2686 set_bit(R10BIO_ReadError
,
2688 r10_bio
->mddev
= mddev
;
2689 r10_bio
->sector
= mbio
->bi_sector
2694 generic_make_request(bio
);
2697 static void handle_write_completed(struct r10conf
*conf
, struct r10bio
*r10_bio
)
2699 /* Some sort of write request has finished and it
2700 * succeeded in writing where we thought there was a
2701 * bad block. So forget the bad block.
2702 * Or possibly if failed and we need to record
2706 struct md_rdev
*rdev
;
2708 if (test_bit(R10BIO_IsSync
, &r10_bio
->state
) ||
2709 test_bit(R10BIO_IsRecover
, &r10_bio
->state
)) {
2710 for (m
= 0; m
< conf
->copies
; m
++) {
2711 int dev
= r10_bio
->devs
[m
].devnum
;
2712 rdev
= conf
->mirrors
[dev
].rdev
;
2713 if (r10_bio
->devs
[m
].bio
== NULL
)
2715 if (test_bit(BIO_UPTODATE
,
2716 &r10_bio
->devs
[m
].bio
->bi_flags
)) {
2717 rdev_clear_badblocks(
2719 r10_bio
->devs
[m
].addr
,
2720 r10_bio
->sectors
, 0);
2722 if (!rdev_set_badblocks(
2724 r10_bio
->devs
[m
].addr
,
2725 r10_bio
->sectors
, 0))
2726 md_error(conf
->mddev
, rdev
);
2728 rdev
= conf
->mirrors
[dev
].replacement
;
2729 if (r10_bio
->devs
[m
].repl_bio
== NULL
)
2731 if (test_bit(BIO_UPTODATE
,
2732 &r10_bio
->devs
[m
].repl_bio
->bi_flags
)) {
2733 rdev_clear_badblocks(
2735 r10_bio
->devs
[m
].addr
,
2736 r10_bio
->sectors
, 0);
2738 if (!rdev_set_badblocks(
2740 r10_bio
->devs
[m
].addr
,
2741 r10_bio
->sectors
, 0))
2742 md_error(conf
->mddev
, rdev
);
2747 for (m
= 0; m
< conf
->copies
; m
++) {
2748 int dev
= r10_bio
->devs
[m
].devnum
;
2749 struct bio
*bio
= r10_bio
->devs
[m
].bio
;
2750 rdev
= conf
->mirrors
[dev
].rdev
;
2751 if (bio
== IO_MADE_GOOD
) {
2752 rdev_clear_badblocks(
2754 r10_bio
->devs
[m
].addr
,
2755 r10_bio
->sectors
, 0);
2756 rdev_dec_pending(rdev
, conf
->mddev
);
2757 } else if (bio
!= NULL
&&
2758 !test_bit(BIO_UPTODATE
, &bio
->bi_flags
)) {
2759 if (!narrow_write_error(r10_bio
, m
)) {
2760 md_error(conf
->mddev
, rdev
);
2761 set_bit(R10BIO_Degraded
,
2764 rdev_dec_pending(rdev
, conf
->mddev
);
2766 bio
= r10_bio
->devs
[m
].repl_bio
;
2767 rdev
= conf
->mirrors
[dev
].replacement
;
2768 if (rdev
&& bio
== IO_MADE_GOOD
) {
2769 rdev_clear_badblocks(
2771 r10_bio
->devs
[m
].addr
,
2772 r10_bio
->sectors
, 0);
2773 rdev_dec_pending(rdev
, conf
->mddev
);
2776 if (test_bit(R10BIO_WriteError
,
2778 close_write(r10_bio
);
2779 raid_end_bio_io(r10_bio
);
2783 static void raid10d(struct md_thread
*thread
)
2785 struct mddev
*mddev
= thread
->mddev
;
2786 struct r10bio
*r10_bio
;
2787 unsigned long flags
;
2788 struct r10conf
*conf
= mddev
->private;
2789 struct list_head
*head
= &conf
->retry_list
;
2790 struct blk_plug plug
;
2792 md_check_recovery(mddev
);
2794 blk_start_plug(&plug
);
2797 flush_pending_writes(conf
);
2799 spin_lock_irqsave(&conf
->device_lock
, flags
);
2800 if (list_empty(head
)) {
2801 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
2804 r10_bio
= list_entry(head
->prev
, struct r10bio
, retry_list
);
2805 list_del(head
->prev
);
2807 spin_unlock_irqrestore(&conf
->device_lock
, flags
);
2809 mddev
= r10_bio
->mddev
;
2810 conf
= mddev
->private;
2811 if (test_bit(R10BIO_MadeGood
, &r10_bio
->state
) ||
2812 test_bit(R10BIO_WriteError
, &r10_bio
->state
))
2813 handle_write_completed(conf
, r10_bio
);
2814 else if (test_bit(R10BIO_IsReshape
, &r10_bio
->state
))
2815 reshape_request_write(mddev
, r10_bio
);
2816 else if (test_bit(R10BIO_IsSync
, &r10_bio
->state
))
2817 sync_request_write(mddev
, r10_bio
);
2818 else if (test_bit(R10BIO_IsRecover
, &r10_bio
->state
))
2819 recovery_request_write(mddev
, r10_bio
);
2820 else if (test_bit(R10BIO_ReadError
, &r10_bio
->state
))
2821 handle_read_error(mddev
, r10_bio
);
2823 /* just a partial read to be scheduled from a
2826 int slot
= r10_bio
->read_slot
;
2827 generic_make_request(r10_bio
->devs
[slot
].bio
);
2831 if (mddev
->flags
& ~(1<<MD_CHANGE_PENDING
))
2832 md_check_recovery(mddev
);
2834 blk_finish_plug(&plug
);
2838 static int init_resync(struct r10conf
*conf
)
2843 buffs
= RESYNC_WINDOW
/ RESYNC_BLOCK_SIZE
;
2844 BUG_ON(conf
->r10buf_pool
);
2845 conf
->have_replacement
= 0;
2846 for (i
= 0; i
< conf
->geo
.raid_disks
; i
++)
2847 if (conf
->mirrors
[i
].replacement
)
2848 conf
->have_replacement
= 1;
2849 conf
->r10buf_pool
= mempool_create(buffs
, r10buf_pool_alloc
, r10buf_pool_free
, conf
);
2850 if (!conf
->r10buf_pool
)
2852 conf
->next_resync
= 0;
2857 * perform a "sync" on one "block"
2859 * We need to make sure that no normal I/O request - particularly write
2860 * requests - conflict with active sync requests.
2862 * This is achieved by tracking pending requests and a 'barrier' concept
2863 * that can be installed to exclude normal IO requests.
2865 * Resync and recovery are handled very differently.
2866 * We differentiate by looking at MD_RECOVERY_SYNC in mddev->recovery.
2868 * For resync, we iterate over virtual addresses, read all copies,
2869 * and update if there are differences. If only one copy is live,
2871 * For recovery, we iterate over physical addresses, read a good
2872 * value for each non-in_sync drive, and over-write.
2874 * So, for recovery we may have several outstanding complex requests for a
2875 * given address, one for each out-of-sync device. We model this by allocating
2876 * a number of r10_bio structures, one for each out-of-sync device.
2877 * As we setup these structures, we collect all bio's together into a list
2878 * which we then process collectively to add pages, and then process again
2879 * to pass to generic_make_request.
2881 * The r10_bio structures are linked using a borrowed master_bio pointer.
2882 * This link is counted in ->remaining. When the r10_bio that points to NULL
2883 * has its remaining count decremented to 0, the whole complex operation
2888 static sector_t
sync_request(struct mddev
*mddev
, sector_t sector_nr
,
2889 int *skipped
, int go_faster
)
2891 struct r10conf
*conf
= mddev
->private;
2892 struct r10bio
*r10_bio
;
2893 struct bio
*biolist
= NULL
, *bio
;
2894 sector_t max_sector
, nr_sectors
;
2897 sector_t sync_blocks
;
2898 sector_t sectors_skipped
= 0;
2899 int chunks_skipped
= 0;
2900 sector_t chunk_mask
= conf
->geo
.chunk_mask
;
2902 if (!conf
->r10buf_pool
)
2903 if (init_resync(conf
))
2907 * Allow skipping a full rebuild for incremental assembly
2908 * of a clean array, like RAID1 does.
2910 if (mddev
->bitmap
== NULL
&&
2911 mddev
->recovery_cp
== MaxSector
&&
2912 !test_bit(MD_RECOVERY_REQUESTED
, &mddev
->recovery
) &&
2913 conf
->fullsync
== 0) {
2915 max_sector
= mddev
->dev_sectors
;
2916 if (test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
) ||
2917 test_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
))
2918 max_sector
= mddev
->resync_max_sectors
;
2919 return max_sector
- sector_nr
;
2923 max_sector
= mddev
->dev_sectors
;
2924 if (test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
) ||
2925 test_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
))
2926 max_sector
= mddev
->resync_max_sectors
;
2927 if (sector_nr
>= max_sector
) {
2928 /* If we aborted, we need to abort the
2929 * sync on the 'current' bitmap chucks (there can
2930 * be several when recovering multiple devices).
2931 * as we may have started syncing it but not finished.
2932 * We can find the current address in
2933 * mddev->curr_resync, but for recovery,
2934 * we need to convert that to several
2935 * virtual addresses.
2937 if (test_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
)) {
2942 if (mddev
->curr_resync
< max_sector
) { /* aborted */
2943 if (test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
))
2944 bitmap_end_sync(mddev
->bitmap
, mddev
->curr_resync
,
2946 else for (i
= 0; i
< conf
->geo
.raid_disks
; i
++) {
2948 raid10_find_virt(conf
, mddev
->curr_resync
, i
);
2949 bitmap_end_sync(mddev
->bitmap
, sect
,
2953 /* completed sync */
2954 if ((!mddev
->bitmap
|| conf
->fullsync
)
2955 && conf
->have_replacement
2956 && test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
)) {
2957 /* Completed a full sync so the replacements
2958 * are now fully recovered.
2960 for (i
= 0; i
< conf
->geo
.raid_disks
; i
++)
2961 if (conf
->mirrors
[i
].replacement
)
2962 conf
->mirrors
[i
].replacement
2968 bitmap_close_sync(mddev
->bitmap
);
2971 return sectors_skipped
;
2974 if (test_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
))
2975 return reshape_request(mddev
, sector_nr
, skipped
);
2977 if (chunks_skipped
>= conf
->geo
.raid_disks
) {
2978 /* if there has been nothing to do on any drive,
2979 * then there is nothing to do at all..
2982 return (max_sector
- sector_nr
) + sectors_skipped
;
2985 if (max_sector
> mddev
->resync_max
)
2986 max_sector
= mddev
->resync_max
; /* Don't do IO beyond here */
2988 /* make sure whole request will fit in a chunk - if chunks
2991 if (conf
->geo
.near_copies
< conf
->geo
.raid_disks
&&
2992 max_sector
> (sector_nr
| chunk_mask
))
2993 max_sector
= (sector_nr
| chunk_mask
) + 1;
2995 * If there is non-resync activity waiting for us then
2996 * put in a delay to throttle resync.
2998 if (!go_faster
&& conf
->nr_waiting
)
2999 msleep_interruptible(1000);
3001 /* Again, very different code for resync and recovery.
3002 * Both must result in an r10bio with a list of bios that
3003 * have bi_end_io, bi_sector, bi_bdev set,
3004 * and bi_private set to the r10bio.
3005 * For recovery, we may actually create several r10bios
3006 * with 2 bios in each, that correspond to the bios in the main one.
3007 * In this case, the subordinate r10bios link back through a
3008 * borrowed master_bio pointer, and the counter in the master
3009 * includes a ref from each subordinate.
3011 /* First, we decide what to do and set ->bi_end_io
3012 * To end_sync_read if we want to read, and
3013 * end_sync_write if we will want to write.
3016 max_sync
= RESYNC_PAGES
<< (PAGE_SHIFT
-9);
3017 if (!test_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
)) {
3018 /* recovery... the complicated one */
3022 for (i
= 0 ; i
< conf
->geo
.raid_disks
; i
++) {
3028 struct raid10_info
*mirror
= &conf
->mirrors
[i
];
3030 if ((mirror
->rdev
== NULL
||
3031 test_bit(In_sync
, &mirror
->rdev
->flags
))
3033 (mirror
->replacement
== NULL
||
3035 &mirror
->replacement
->flags
)))
3039 /* want to reconstruct this device */
3041 sect
= raid10_find_virt(conf
, sector_nr
, i
);
3042 if (sect
>= mddev
->resync_max_sectors
) {
3043 /* last stripe is not complete - don't
3044 * try to recover this sector.
3048 /* Unless we are doing a full sync, or a replacement
3049 * we only need to recover the block if it is set in
3052 must_sync
= bitmap_start_sync(mddev
->bitmap
, sect
,
3054 if (sync_blocks
< max_sync
)
3055 max_sync
= sync_blocks
;
3057 mirror
->replacement
== NULL
&&
3059 /* yep, skip the sync_blocks here, but don't assume
3060 * that there will never be anything to do here
3062 chunks_skipped
= -1;
3066 r10_bio
= mempool_alloc(conf
->r10buf_pool
, GFP_NOIO
);
3067 raise_barrier(conf
, rb2
!= NULL
);
3068 atomic_set(&r10_bio
->remaining
, 0);
3070 r10_bio
->master_bio
= (struct bio
*)rb2
;
3072 atomic_inc(&rb2
->remaining
);
3073 r10_bio
->mddev
= mddev
;
3074 set_bit(R10BIO_IsRecover
, &r10_bio
->state
);
3075 r10_bio
->sector
= sect
;
3077 raid10_find_phys(conf
, r10_bio
);
3079 /* Need to check if the array will still be
3082 for (j
= 0; j
< conf
->geo
.raid_disks
; j
++)
3083 if (conf
->mirrors
[j
].rdev
== NULL
||
3084 test_bit(Faulty
, &conf
->mirrors
[j
].rdev
->flags
)) {
3089 must_sync
= bitmap_start_sync(mddev
->bitmap
, sect
,
3090 &sync_blocks
, still_degraded
);
3093 for (j
=0; j
<conf
->copies
;j
++) {
3095 int d
= r10_bio
->devs
[j
].devnum
;
3096 sector_t from_addr
, to_addr
;
3097 struct md_rdev
*rdev
;
3098 sector_t sector
, first_bad
;
3100 if (!conf
->mirrors
[d
].rdev
||
3101 !test_bit(In_sync
, &conf
->mirrors
[d
].rdev
->flags
))
3103 /* This is where we read from */
3105 rdev
= conf
->mirrors
[d
].rdev
;
3106 sector
= r10_bio
->devs
[j
].addr
;
3108 if (is_badblock(rdev
, sector
, max_sync
,
3109 &first_bad
, &bad_sectors
)) {
3110 if (first_bad
> sector
)
3111 max_sync
= first_bad
- sector
;
3113 bad_sectors
-= (sector
3115 if (max_sync
> bad_sectors
)
3116 max_sync
= bad_sectors
;
3120 bio
= r10_bio
->devs
[0].bio
;
3122 bio
->bi_next
= biolist
;
3124 bio
->bi_private
= r10_bio
;
3125 bio
->bi_end_io
= end_sync_read
;
3127 from_addr
= r10_bio
->devs
[j
].addr
;
3128 bio
->bi_sector
= from_addr
+ rdev
->data_offset
;
3129 bio
->bi_bdev
= rdev
->bdev
;
3130 atomic_inc(&rdev
->nr_pending
);
3131 /* and we write to 'i' (if not in_sync) */
3133 for (k
=0; k
<conf
->copies
; k
++)
3134 if (r10_bio
->devs
[k
].devnum
== i
)
3136 BUG_ON(k
== conf
->copies
);
3137 to_addr
= r10_bio
->devs
[k
].addr
;
3138 r10_bio
->devs
[0].devnum
= d
;
3139 r10_bio
->devs
[0].addr
= from_addr
;
3140 r10_bio
->devs
[1].devnum
= i
;
3141 r10_bio
->devs
[1].addr
= to_addr
;
3143 rdev
= mirror
->rdev
;
3144 if (!test_bit(In_sync
, &rdev
->flags
)) {
3145 bio
= r10_bio
->devs
[1].bio
;
3147 bio
->bi_next
= biolist
;
3149 bio
->bi_private
= r10_bio
;
3150 bio
->bi_end_io
= end_sync_write
;
3152 bio
->bi_sector
= to_addr
3153 + rdev
->data_offset
;
3154 bio
->bi_bdev
= rdev
->bdev
;
3155 atomic_inc(&r10_bio
->remaining
);
3157 r10_bio
->devs
[1].bio
->bi_end_io
= NULL
;
3159 /* and maybe write to replacement */
3160 bio
= r10_bio
->devs
[1].repl_bio
;
3162 bio
->bi_end_io
= NULL
;
3163 rdev
= mirror
->replacement
;
3164 /* Note: if rdev != NULL, then bio
3165 * cannot be NULL as r10buf_pool_alloc will
3166 * have allocated it.
3167 * So the second test here is pointless.
3168 * But it keeps semantic-checkers happy, and
3169 * this comment keeps human reviewers
3172 if (rdev
== NULL
|| bio
== NULL
||
3173 test_bit(Faulty
, &rdev
->flags
))
3176 bio
->bi_next
= biolist
;
3178 bio
->bi_private
= r10_bio
;
3179 bio
->bi_end_io
= end_sync_write
;
3181 bio
->bi_sector
= to_addr
+ rdev
->data_offset
;
3182 bio
->bi_bdev
= rdev
->bdev
;
3183 atomic_inc(&r10_bio
->remaining
);
3186 if (j
== conf
->copies
) {
3187 /* Cannot recover, so abort the recovery or
3188 * record a bad block */
3191 atomic_dec(&rb2
->remaining
);
3194 /* problem is that there are bad blocks
3195 * on other device(s)
3198 for (k
= 0; k
< conf
->copies
; k
++)
3199 if (r10_bio
->devs
[k
].devnum
== i
)
3201 if (!test_bit(In_sync
,
3202 &mirror
->rdev
->flags
)
3203 && !rdev_set_badblocks(
3205 r10_bio
->devs
[k
].addr
,
3208 if (mirror
->replacement
&&
3209 !rdev_set_badblocks(
3210 mirror
->replacement
,
3211 r10_bio
->devs
[k
].addr
,
3216 if (!test_and_set_bit(MD_RECOVERY_INTR
,
3218 printk(KERN_INFO
"md/raid10:%s: insufficient "
3219 "working devices for recovery.\n",
3221 mirror
->recovery_disabled
3222 = mddev
->recovery_disabled
;
3227 if (biolist
== NULL
) {
3229 struct r10bio
*rb2
= r10_bio
;
3230 r10_bio
= (struct r10bio
*) rb2
->master_bio
;
3231 rb2
->master_bio
= NULL
;
3237 /* resync. Schedule a read for every block at this virt offset */
3240 bitmap_cond_end_sync(mddev
->bitmap
, sector_nr
);
3242 if (!bitmap_start_sync(mddev
->bitmap
, sector_nr
,
3243 &sync_blocks
, mddev
->degraded
) &&
3244 !conf
->fullsync
&& !test_bit(MD_RECOVERY_REQUESTED
,
3245 &mddev
->recovery
)) {
3246 /* We can skip this block */
3248 return sync_blocks
+ sectors_skipped
;
3250 if (sync_blocks
< max_sync
)
3251 max_sync
= sync_blocks
;
3252 r10_bio
= mempool_alloc(conf
->r10buf_pool
, GFP_NOIO
);
3254 r10_bio
->mddev
= mddev
;
3255 atomic_set(&r10_bio
->remaining
, 0);
3256 raise_barrier(conf
, 0);
3257 conf
->next_resync
= sector_nr
;
3259 r10_bio
->master_bio
= NULL
;
3260 r10_bio
->sector
= sector_nr
;
3261 set_bit(R10BIO_IsSync
, &r10_bio
->state
);
3262 raid10_find_phys(conf
, r10_bio
);
3263 r10_bio
->sectors
= (sector_nr
| chunk_mask
) - sector_nr
+ 1;
3265 for (i
= 0; i
< conf
->copies
; i
++) {
3266 int d
= r10_bio
->devs
[i
].devnum
;
3267 sector_t first_bad
, sector
;
3270 if (r10_bio
->devs
[i
].repl_bio
)
3271 r10_bio
->devs
[i
].repl_bio
->bi_end_io
= NULL
;
3273 bio
= r10_bio
->devs
[i
].bio
;
3275 clear_bit(BIO_UPTODATE
, &bio
->bi_flags
);
3276 if (conf
->mirrors
[d
].rdev
== NULL
||
3277 test_bit(Faulty
, &conf
->mirrors
[d
].rdev
->flags
))
3279 sector
= r10_bio
->devs
[i
].addr
;
3280 if (is_badblock(conf
->mirrors
[d
].rdev
,
3282 &first_bad
, &bad_sectors
)) {
3283 if (first_bad
> sector
)
3284 max_sync
= first_bad
- sector
;
3286 bad_sectors
-= (sector
- first_bad
);
3287 if (max_sync
> bad_sectors
)
3288 max_sync
= bad_sectors
;
3292 atomic_inc(&conf
->mirrors
[d
].rdev
->nr_pending
);
3293 atomic_inc(&r10_bio
->remaining
);
3294 bio
->bi_next
= biolist
;
3296 bio
->bi_private
= r10_bio
;
3297 bio
->bi_end_io
= end_sync_read
;
3299 bio
->bi_sector
= sector
+
3300 conf
->mirrors
[d
].rdev
->data_offset
;
3301 bio
->bi_bdev
= conf
->mirrors
[d
].rdev
->bdev
;
3304 if (conf
->mirrors
[d
].replacement
== NULL
||
3306 &conf
->mirrors
[d
].replacement
->flags
))
3309 /* Need to set up for writing to the replacement */
3310 bio
= r10_bio
->devs
[i
].repl_bio
;
3312 clear_bit(BIO_UPTODATE
, &bio
->bi_flags
);
3314 sector
= r10_bio
->devs
[i
].addr
;
3315 atomic_inc(&conf
->mirrors
[d
].rdev
->nr_pending
);
3316 bio
->bi_next
= biolist
;
3318 bio
->bi_private
= r10_bio
;
3319 bio
->bi_end_io
= end_sync_write
;
3321 bio
->bi_sector
= sector
+
3322 conf
->mirrors
[d
].replacement
->data_offset
;
3323 bio
->bi_bdev
= conf
->mirrors
[d
].replacement
->bdev
;
3328 for (i
=0; i
<conf
->copies
; i
++) {
3329 int d
= r10_bio
->devs
[i
].devnum
;
3330 if (r10_bio
->devs
[i
].bio
->bi_end_io
)
3331 rdev_dec_pending(conf
->mirrors
[d
].rdev
,
3333 if (r10_bio
->devs
[i
].repl_bio
&&
3334 r10_bio
->devs
[i
].repl_bio
->bi_end_io
)
3336 conf
->mirrors
[d
].replacement
,
3346 if (sector_nr
+ max_sync
< max_sector
)
3347 max_sector
= sector_nr
+ max_sync
;
3350 int len
= PAGE_SIZE
;
3351 if (sector_nr
+ (len
>>9) > max_sector
)
3352 len
= (max_sector
- sector_nr
) << 9;
3355 for (bio
= biolist
; bio
; bio
=bio
->bi_next
) {
3357 page
= bio
->bi_io_vec
[bio
->bi_vcnt
].bv_page
;
3358 if (bio_add_page(bio
, page
, len
, 0))
3362 bio
->bi_io_vec
[bio
->bi_vcnt
].bv_page
= page
;
3363 for (bio2
= biolist
;
3364 bio2
&& bio2
!= bio
;
3365 bio2
= bio2
->bi_next
) {
3366 /* remove last page from this bio */
3368 bio2
->bi_size
-= len
;
3369 bio2
->bi_flags
&= ~(1<< BIO_SEG_VALID
);
3373 nr_sectors
+= len
>>9;
3374 sector_nr
+= len
>>9;
3375 } while (biolist
->bi_vcnt
< RESYNC_PAGES
);
3377 r10_bio
->sectors
= nr_sectors
;
3381 biolist
= biolist
->bi_next
;
3383 bio
->bi_next
= NULL
;
3384 r10_bio
= bio
->bi_private
;
3385 r10_bio
->sectors
= nr_sectors
;
3387 if (bio
->bi_end_io
== end_sync_read
) {
3388 md_sync_acct(bio
->bi_bdev
, nr_sectors
);
3389 generic_make_request(bio
);
3393 if (sectors_skipped
)
3394 /* pretend they weren't skipped, it makes
3395 * no important difference in this case
3397 md_done_sync(mddev
, sectors_skipped
, 1);
3399 return sectors_skipped
+ nr_sectors
;
3401 /* There is nowhere to write, so all non-sync
3402 * drives must be failed or in resync, all drives
3403 * have a bad block, so try the next chunk...
3405 if (sector_nr
+ max_sync
< max_sector
)
3406 max_sector
= sector_nr
+ max_sync
;
3408 sectors_skipped
+= (max_sector
- sector_nr
);
3410 sector_nr
= max_sector
;
3415 raid10_size(struct mddev
*mddev
, sector_t sectors
, int raid_disks
)
3418 struct r10conf
*conf
= mddev
->private;
3421 raid_disks
= min(conf
->geo
.raid_disks
,
3422 conf
->prev
.raid_disks
);
3424 sectors
= conf
->dev_sectors
;
3426 size
= sectors
>> conf
->geo
.chunk_shift
;
3427 sector_div(size
, conf
->geo
.far_copies
);
3428 size
= size
* raid_disks
;
3429 sector_div(size
, conf
->geo
.near_copies
);
3431 return size
<< conf
->geo
.chunk_shift
;
3434 static void calc_sectors(struct r10conf
*conf
, sector_t size
)
3436 /* Calculate the number of sectors-per-device that will
3437 * actually be used, and set conf->dev_sectors and
3441 size
= size
>> conf
->geo
.chunk_shift
;
3442 sector_div(size
, conf
->geo
.far_copies
);
3443 size
= size
* conf
->geo
.raid_disks
;
3444 sector_div(size
, conf
->geo
.near_copies
);
3445 /* 'size' is now the number of chunks in the array */
3446 /* calculate "used chunks per device" */
3447 size
= size
* conf
->copies
;
3449 /* We need to round up when dividing by raid_disks to
3450 * get the stride size.
3452 size
= DIV_ROUND_UP_SECTOR_T(size
, conf
->geo
.raid_disks
);
3454 conf
->dev_sectors
= size
<< conf
->geo
.chunk_shift
;
3456 if (conf
->geo
.far_offset
)
3457 conf
->geo
.stride
= 1 << conf
->geo
.chunk_shift
;
3459 sector_div(size
, conf
->geo
.far_copies
);
3460 conf
->geo
.stride
= size
<< conf
->geo
.chunk_shift
;
3464 enum geo_type
{geo_new
, geo_old
, geo_start
};
3465 static int setup_geo(struct geom
*geo
, struct mddev
*mddev
, enum geo_type
new)
3468 int layout
, chunk
, disks
;
3471 layout
= mddev
->layout
;
3472 chunk
= mddev
->chunk_sectors
;
3473 disks
= mddev
->raid_disks
- mddev
->delta_disks
;
3476 layout
= mddev
->new_layout
;
3477 chunk
= mddev
->new_chunk_sectors
;
3478 disks
= mddev
->raid_disks
;
3480 default: /* avoid 'may be unused' warnings */
3481 case geo_start
: /* new when starting reshape - raid_disks not
3483 layout
= mddev
->new_layout
;
3484 chunk
= mddev
->new_chunk_sectors
;
3485 disks
= mddev
->raid_disks
+ mddev
->delta_disks
;
3490 if (chunk
< (PAGE_SIZE
>> 9) ||
3491 !is_power_of_2(chunk
))
3494 fc
= (layout
>> 8) & 255;
3495 fo
= layout
& (1<<16);
3496 geo
->raid_disks
= disks
;
3497 geo
->near_copies
= nc
;
3498 geo
->far_copies
= fc
;
3499 geo
->far_offset
= fo
;
3500 geo
->far_set_size
= (layout
& (1<<17)) ? disks
/ fc
: disks
;
3501 geo
->chunk_mask
= chunk
- 1;
3502 geo
->chunk_shift
= ffz(~chunk
);
3506 static struct r10conf
*setup_conf(struct mddev
*mddev
)
3508 struct r10conf
*conf
= NULL
;
3513 copies
= setup_geo(&geo
, mddev
, geo_new
);
3516 printk(KERN_ERR
"md/raid10:%s: chunk size must be "
3517 "at least PAGE_SIZE(%ld) and be a power of 2.\n",
3518 mdname(mddev
), PAGE_SIZE
);
3522 if (copies
< 2 || copies
> mddev
->raid_disks
) {
3523 printk(KERN_ERR
"md/raid10:%s: unsupported raid10 layout: 0x%8x\n",
3524 mdname(mddev
), mddev
->new_layout
);
3529 conf
= kzalloc(sizeof(struct r10conf
), GFP_KERNEL
);
3533 /* FIXME calc properly */
3534 conf
->mirrors
= kzalloc(sizeof(struct raid10_info
)*(mddev
->raid_disks
+
3535 max(0,mddev
->delta_disks
)),
3540 conf
->tmppage
= alloc_page(GFP_KERNEL
);
3545 conf
->copies
= copies
;
3546 conf
->r10bio_pool
= mempool_create(NR_RAID10_BIOS
, r10bio_pool_alloc
,
3547 r10bio_pool_free
, conf
);
3548 if (!conf
->r10bio_pool
)
3551 calc_sectors(conf
, mddev
->dev_sectors
);
3552 if (mddev
->reshape_position
== MaxSector
) {
3553 conf
->prev
= conf
->geo
;
3554 conf
->reshape_progress
= MaxSector
;
3556 if (setup_geo(&conf
->prev
, mddev
, geo_old
) != conf
->copies
) {
3560 conf
->reshape_progress
= mddev
->reshape_position
;
3561 if (conf
->prev
.far_offset
)
3562 conf
->prev
.stride
= 1 << conf
->prev
.chunk_shift
;
3564 /* far_copies must be 1 */
3565 conf
->prev
.stride
= conf
->dev_sectors
;
3567 spin_lock_init(&conf
->device_lock
);
3568 INIT_LIST_HEAD(&conf
->retry_list
);
3570 spin_lock_init(&conf
->resync_lock
);
3571 init_waitqueue_head(&conf
->wait_barrier
);
3573 conf
->thread
= md_register_thread(raid10d
, mddev
, "raid10");
3577 conf
->mddev
= mddev
;
3582 printk(KERN_ERR
"md/raid10:%s: couldn't allocate memory.\n",
3585 if (conf
->r10bio_pool
)
3586 mempool_destroy(conf
->r10bio_pool
);
3587 kfree(conf
->mirrors
);
3588 safe_put_page(conf
->tmppage
);
3591 return ERR_PTR(err
);
3594 static int run(struct mddev
*mddev
)
3596 struct r10conf
*conf
;
3597 int i
, disk_idx
, chunk_size
;
3598 struct raid10_info
*disk
;
3599 struct md_rdev
*rdev
;
3601 sector_t min_offset_diff
= 0;
3603 bool discard_supported
= false;
3605 if (mddev
->private == NULL
) {
3606 conf
= setup_conf(mddev
);
3608 return PTR_ERR(conf
);
3609 mddev
->private = conf
;
3611 conf
= mddev
->private;
3615 mddev
->thread
= conf
->thread
;
3616 conf
->thread
= NULL
;
3618 chunk_size
= mddev
->chunk_sectors
<< 9;
3620 blk_queue_max_discard_sectors(mddev
->queue
,
3621 mddev
->chunk_sectors
);
3622 blk_queue_max_write_same_sectors(mddev
->queue
, 0);
3623 blk_queue_io_min(mddev
->queue
, chunk_size
);
3624 if (conf
->geo
.raid_disks
% conf
->geo
.near_copies
)
3625 blk_queue_io_opt(mddev
->queue
, chunk_size
* conf
->geo
.raid_disks
);
3627 blk_queue_io_opt(mddev
->queue
, chunk_size
*
3628 (conf
->geo
.raid_disks
/ conf
->geo
.near_copies
));
3631 rdev_for_each(rdev
, mddev
) {
3633 struct request_queue
*q
;
3635 disk_idx
= rdev
->raid_disk
;
3638 if (disk_idx
>= conf
->geo
.raid_disks
&&
3639 disk_idx
>= conf
->prev
.raid_disks
)
3641 disk
= conf
->mirrors
+ disk_idx
;
3643 if (test_bit(Replacement
, &rdev
->flags
)) {
3644 if (disk
->replacement
)
3646 disk
->replacement
= rdev
;
3652 q
= bdev_get_queue(rdev
->bdev
);
3653 if (q
->merge_bvec_fn
)
3654 mddev
->merge_check_needed
= 1;
3655 diff
= (rdev
->new_data_offset
- rdev
->data_offset
);
3656 if (!mddev
->reshape_backwards
)
3660 if (first
|| diff
< min_offset_diff
)
3661 min_offset_diff
= diff
;
3664 disk_stack_limits(mddev
->gendisk
, rdev
->bdev
,
3665 rdev
->data_offset
<< 9);
3667 disk
->head_position
= 0;
3669 if (blk_queue_discard(bdev_get_queue(rdev
->bdev
)))
3670 discard_supported
= true;
3674 if (discard_supported
)
3675 queue_flag_set_unlocked(QUEUE_FLAG_DISCARD
,
3678 queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD
,
3681 /* need to check that every block has at least one working mirror */
3682 if (!enough(conf
, -1)) {
3683 printk(KERN_ERR
"md/raid10:%s: not enough operational mirrors.\n",
3688 if (conf
->reshape_progress
!= MaxSector
) {
3689 /* must ensure that shape change is supported */
3690 if (conf
->geo
.far_copies
!= 1 &&
3691 conf
->geo
.far_offset
== 0)
3693 if (conf
->prev
.far_copies
!= 1 &&
3694 conf
->geo
.far_offset
== 0)
3698 mddev
->degraded
= 0;
3700 i
< conf
->geo
.raid_disks
3701 || i
< conf
->prev
.raid_disks
;
3704 disk
= conf
->mirrors
+ i
;
3706 if (!disk
->rdev
&& disk
->replacement
) {
3707 /* The replacement is all we have - use it */
3708 disk
->rdev
= disk
->replacement
;
3709 disk
->replacement
= NULL
;
3710 clear_bit(Replacement
, &disk
->rdev
->flags
);
3714 !test_bit(In_sync
, &disk
->rdev
->flags
)) {
3715 disk
->head_position
= 0;
3720 disk
->recovery_disabled
= mddev
->recovery_disabled
- 1;
3723 if (mddev
->recovery_cp
!= MaxSector
)
3724 printk(KERN_NOTICE
"md/raid10:%s: not clean"
3725 " -- starting background reconstruction\n",
3728 "md/raid10:%s: active with %d out of %d devices\n",
3729 mdname(mddev
), conf
->geo
.raid_disks
- mddev
->degraded
,
3730 conf
->geo
.raid_disks
);
3732 * Ok, everything is just fine now
3734 mddev
->dev_sectors
= conf
->dev_sectors
;
3735 size
= raid10_size(mddev
, 0, 0);
3736 md_set_array_sectors(mddev
, size
);
3737 mddev
->resync_max_sectors
= size
;
3740 int stripe
= conf
->geo
.raid_disks
*
3741 ((mddev
->chunk_sectors
<< 9) / PAGE_SIZE
);
3742 mddev
->queue
->backing_dev_info
.congested_fn
= raid10_congested
;
3743 mddev
->queue
->backing_dev_info
.congested_data
= mddev
;
3745 /* Calculate max read-ahead size.
3746 * We need to readahead at least twice a whole stripe....
3749 stripe
/= conf
->geo
.near_copies
;
3750 if (mddev
->queue
->backing_dev_info
.ra_pages
< 2 * stripe
)
3751 mddev
->queue
->backing_dev_info
.ra_pages
= 2 * stripe
;
3752 blk_queue_merge_bvec(mddev
->queue
, raid10_mergeable_bvec
);
3756 if (md_integrity_register(mddev
))
3759 if (conf
->reshape_progress
!= MaxSector
) {
3760 unsigned long before_length
, after_length
;
3762 before_length
= ((1 << conf
->prev
.chunk_shift
) *
3763 conf
->prev
.far_copies
);
3764 after_length
= ((1 << conf
->geo
.chunk_shift
) *
3765 conf
->geo
.far_copies
);
3767 if (max(before_length
, after_length
) > min_offset_diff
) {
3768 /* This cannot work */
3769 printk("md/raid10: offset difference not enough to continue reshape\n");
3772 conf
->offset_diff
= min_offset_diff
;
3774 conf
->reshape_safe
= conf
->reshape_progress
;
3775 clear_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
);
3776 clear_bit(MD_RECOVERY_CHECK
, &mddev
->recovery
);
3777 set_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
);
3778 set_bit(MD_RECOVERY_RUNNING
, &mddev
->recovery
);
3779 mddev
->sync_thread
= md_register_thread(md_do_sync
, mddev
,
3786 md_unregister_thread(&mddev
->thread
);
3787 if (conf
->r10bio_pool
)
3788 mempool_destroy(conf
->r10bio_pool
);
3789 safe_put_page(conf
->tmppage
);
3790 kfree(conf
->mirrors
);
3792 mddev
->private = NULL
;
3797 static int stop(struct mddev
*mddev
)
3799 struct r10conf
*conf
= mddev
->private;
3801 raise_barrier(conf
, 0);
3802 lower_barrier(conf
);
3804 md_unregister_thread(&mddev
->thread
);
3806 /* the unplug fn references 'conf'*/
3807 blk_sync_queue(mddev
->queue
);
3809 if (conf
->r10bio_pool
)
3810 mempool_destroy(conf
->r10bio_pool
);
3811 safe_put_page(conf
->tmppage
);
3812 kfree(conf
->mirrors
);
3814 mddev
->private = NULL
;
3818 static void raid10_quiesce(struct mddev
*mddev
, int state
)
3820 struct r10conf
*conf
= mddev
->private;
3824 raise_barrier(conf
, 0);
3827 lower_barrier(conf
);
3832 static int raid10_resize(struct mddev
*mddev
, sector_t sectors
)
3834 /* Resize of 'far' arrays is not supported.
3835 * For 'near' and 'offset' arrays we can set the
3836 * number of sectors used to be an appropriate multiple
3837 * of the chunk size.
3838 * For 'offset', this is far_copies*chunksize.
3839 * For 'near' the multiplier is the LCM of
3840 * near_copies and raid_disks.
3841 * So if far_copies > 1 && !far_offset, fail.
3842 * Else find LCM(raid_disks, near_copy)*far_copies and
3843 * multiply by chunk_size. Then round to this number.
3844 * This is mostly done by raid10_size()
3846 struct r10conf
*conf
= mddev
->private;
3847 sector_t oldsize
, size
;
3849 if (mddev
->reshape_position
!= MaxSector
)
3852 if (conf
->geo
.far_copies
> 1 && !conf
->geo
.far_offset
)
3855 oldsize
= raid10_size(mddev
, 0, 0);
3856 size
= raid10_size(mddev
, sectors
, 0);
3857 if (mddev
->external_size
&&
3858 mddev
->array_sectors
> size
)
3860 if (mddev
->bitmap
) {
3861 int ret
= bitmap_resize(mddev
->bitmap
, size
, 0, 0);
3865 md_set_array_sectors(mddev
, size
);
3866 set_capacity(mddev
->gendisk
, mddev
->array_sectors
);
3867 revalidate_disk(mddev
->gendisk
);
3868 if (sectors
> mddev
->dev_sectors
&&
3869 mddev
->recovery_cp
> oldsize
) {
3870 mddev
->recovery_cp
= oldsize
;
3871 set_bit(MD_RECOVERY_NEEDED
, &mddev
->recovery
);
3873 calc_sectors(conf
, sectors
);
3874 mddev
->dev_sectors
= conf
->dev_sectors
;
3875 mddev
->resync_max_sectors
= size
;
3879 static void *raid10_takeover_raid0(struct mddev
*mddev
)
3881 struct md_rdev
*rdev
;
3882 struct r10conf
*conf
;
3884 if (mddev
->degraded
> 0) {
3885 printk(KERN_ERR
"md/raid10:%s: Error: degraded raid0!\n",
3887 return ERR_PTR(-EINVAL
);
3890 /* Set new parameters */
3891 mddev
->new_level
= 10;
3892 /* new layout: far_copies = 1, near_copies = 2 */
3893 mddev
->new_layout
= (1<<8) + 2;
3894 mddev
->new_chunk_sectors
= mddev
->chunk_sectors
;
3895 mddev
->delta_disks
= mddev
->raid_disks
;
3896 mddev
->raid_disks
*= 2;
3897 /* make sure it will be not marked as dirty */
3898 mddev
->recovery_cp
= MaxSector
;
3900 conf
= setup_conf(mddev
);
3901 if (!IS_ERR(conf
)) {
3902 rdev_for_each(rdev
, mddev
)
3903 if (rdev
->raid_disk
>= 0)
3904 rdev
->new_raid_disk
= rdev
->raid_disk
* 2;
3911 static void *raid10_takeover(struct mddev
*mddev
)
3913 struct r0conf
*raid0_conf
;
3915 /* raid10 can take over:
3916 * raid0 - providing it has only two drives
3918 if (mddev
->level
== 0) {
3919 /* for raid0 takeover only one zone is supported */
3920 raid0_conf
= mddev
->private;
3921 if (raid0_conf
->nr_strip_zones
> 1) {
3922 printk(KERN_ERR
"md/raid10:%s: cannot takeover raid 0"
3923 " with more than one zone.\n",
3925 return ERR_PTR(-EINVAL
);
3927 return raid10_takeover_raid0(mddev
);
3929 return ERR_PTR(-EINVAL
);
3932 static int raid10_check_reshape(struct mddev
*mddev
)
3934 /* Called when there is a request to change
3935 * - layout (to ->new_layout)
3936 * - chunk size (to ->new_chunk_sectors)
3937 * - raid_disks (by delta_disks)
3938 * or when trying to restart a reshape that was ongoing.
3940 * We need to validate the request and possibly allocate
3941 * space if that might be an issue later.
3943 * Currently we reject any reshape of a 'far' mode array,
3944 * allow chunk size to change if new is generally acceptable,
3945 * allow raid_disks to increase, and allow
3946 * a switch between 'near' mode and 'offset' mode.
3948 struct r10conf
*conf
= mddev
->private;
3951 if (conf
->geo
.far_copies
!= 1 && !conf
->geo
.far_offset
)
3954 if (setup_geo(&geo
, mddev
, geo_start
) != conf
->copies
)
3955 /* mustn't change number of copies */
3957 if (geo
.far_copies
> 1 && !geo
.far_offset
)
3958 /* Cannot switch to 'far' mode */
3961 if (mddev
->array_sectors
& geo
.chunk_mask
)
3962 /* not factor of array size */
3965 if (!enough(conf
, -1))
3968 kfree(conf
->mirrors_new
);
3969 conf
->mirrors_new
= NULL
;
3970 if (mddev
->delta_disks
> 0) {
3971 /* allocate new 'mirrors' list */
3972 conf
->mirrors_new
= kzalloc(
3973 sizeof(struct raid10_info
)
3974 *(mddev
->raid_disks
+
3975 mddev
->delta_disks
),
3977 if (!conf
->mirrors_new
)
3984 * Need to check if array has failed when deciding whether to:
3986 * - remove non-faulty devices
3989 * This determination is simple when no reshape is happening.
3990 * However if there is a reshape, we need to carefully check
3991 * both the before and after sections.
3992 * This is because some failed devices may only affect one
3993 * of the two sections, and some non-in_sync devices may
3994 * be insync in the section most affected by failed devices.
3996 static int calc_degraded(struct r10conf
*conf
)
3998 int degraded
, degraded2
;
4003 /* 'prev' section first */
4004 for (i
= 0; i
< conf
->prev
.raid_disks
; i
++) {
4005 struct md_rdev
*rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
4006 if (!rdev
|| test_bit(Faulty
, &rdev
->flags
))
4008 else if (!test_bit(In_sync
, &rdev
->flags
))
4009 /* When we can reduce the number of devices in
4010 * an array, this might not contribute to
4011 * 'degraded'. It does now.
4016 if (conf
->geo
.raid_disks
== conf
->prev
.raid_disks
)
4020 for (i
= 0; i
< conf
->geo
.raid_disks
; i
++) {
4021 struct md_rdev
*rdev
= rcu_dereference(conf
->mirrors
[i
].rdev
);
4022 if (!rdev
|| test_bit(Faulty
, &rdev
->flags
))
4024 else if (!test_bit(In_sync
, &rdev
->flags
)) {
4025 /* If reshape is increasing the number of devices,
4026 * this section has already been recovered, so
4027 * it doesn't contribute to degraded.
4030 if (conf
->geo
.raid_disks
<= conf
->prev
.raid_disks
)
4035 if (degraded2
> degraded
)
4040 static int raid10_start_reshape(struct mddev
*mddev
)
4042 /* A 'reshape' has been requested. This commits
4043 * the various 'new' fields and sets MD_RECOVER_RESHAPE
4044 * This also checks if there are enough spares and adds them
4046 * We currently require enough spares to make the final
4047 * array non-degraded. We also require that the difference
4048 * between old and new data_offset - on each device - is
4049 * enough that we never risk over-writing.
4052 unsigned long before_length
, after_length
;
4053 sector_t min_offset_diff
= 0;
4056 struct r10conf
*conf
= mddev
->private;
4057 struct md_rdev
*rdev
;
4061 if (test_bit(MD_RECOVERY_RUNNING
, &mddev
->recovery
))
4064 if (setup_geo(&new, mddev
, geo_start
) != conf
->copies
)
4067 before_length
= ((1 << conf
->prev
.chunk_shift
) *
4068 conf
->prev
.far_copies
);
4069 after_length
= ((1 << conf
->geo
.chunk_shift
) *
4070 conf
->geo
.far_copies
);
4072 rdev_for_each(rdev
, mddev
) {
4073 if (!test_bit(In_sync
, &rdev
->flags
)
4074 && !test_bit(Faulty
, &rdev
->flags
))
4076 if (rdev
->raid_disk
>= 0) {
4077 long long diff
= (rdev
->new_data_offset
4078 - rdev
->data_offset
);
4079 if (!mddev
->reshape_backwards
)
4083 if (first
|| diff
< min_offset_diff
)
4084 min_offset_diff
= diff
;
4088 if (max(before_length
, after_length
) > min_offset_diff
)
4091 if (spares
< mddev
->delta_disks
)
4094 conf
->offset_diff
= min_offset_diff
;
4095 spin_lock_irq(&conf
->device_lock
);
4096 if (conf
->mirrors_new
) {
4097 memcpy(conf
->mirrors_new
, conf
->mirrors
,
4098 sizeof(struct raid10_info
)*conf
->prev
.raid_disks
);
4100 kfree(conf
->mirrors_old
); /* FIXME and elsewhere */
4101 conf
->mirrors_old
= conf
->mirrors
;
4102 conf
->mirrors
= conf
->mirrors_new
;
4103 conf
->mirrors_new
= NULL
;
4105 setup_geo(&conf
->geo
, mddev
, geo_start
);
4107 if (mddev
->reshape_backwards
) {
4108 sector_t size
= raid10_size(mddev
, 0, 0);
4109 if (size
< mddev
->array_sectors
) {
4110 spin_unlock_irq(&conf
->device_lock
);
4111 printk(KERN_ERR
"md/raid10:%s: array size must be reduce before number of disks\n",
4115 mddev
->resync_max_sectors
= size
;
4116 conf
->reshape_progress
= size
;
4118 conf
->reshape_progress
= 0;
4119 spin_unlock_irq(&conf
->device_lock
);
4121 if (mddev
->delta_disks
&& mddev
->bitmap
) {
4122 ret
= bitmap_resize(mddev
->bitmap
,
4123 raid10_size(mddev
, 0,
4124 conf
->geo
.raid_disks
),
4129 if (mddev
->delta_disks
> 0) {
4130 rdev_for_each(rdev
, mddev
)
4131 if (rdev
->raid_disk
< 0 &&
4132 !test_bit(Faulty
, &rdev
->flags
)) {
4133 if (raid10_add_disk(mddev
, rdev
) == 0) {
4134 if (rdev
->raid_disk
>=
4135 conf
->prev
.raid_disks
)
4136 set_bit(In_sync
, &rdev
->flags
);
4138 rdev
->recovery_offset
= 0;
4140 if (sysfs_link_rdev(mddev
, rdev
))
4141 /* Failure here is OK */;
4143 } else if (rdev
->raid_disk
>= conf
->prev
.raid_disks
4144 && !test_bit(Faulty
, &rdev
->flags
)) {
4145 /* This is a spare that was manually added */
4146 set_bit(In_sync
, &rdev
->flags
);
4149 /* When a reshape changes the number of devices,
4150 * ->degraded is measured against the larger of the
4151 * pre and post numbers.
4153 spin_lock_irq(&conf
->device_lock
);
4154 mddev
->degraded
= calc_degraded(conf
);
4155 spin_unlock_irq(&conf
->device_lock
);
4156 mddev
->raid_disks
= conf
->geo
.raid_disks
;
4157 mddev
->reshape_position
= conf
->reshape_progress
;
4158 set_bit(MD_CHANGE_DEVS
, &mddev
->flags
);
4160 clear_bit(MD_RECOVERY_SYNC
, &mddev
->recovery
);
4161 clear_bit(MD_RECOVERY_CHECK
, &mddev
->recovery
);
4162 set_bit(MD_RECOVERY_RESHAPE
, &mddev
->recovery
);
4163 set_bit(MD_RECOVERY_RUNNING
, &mddev
->recovery
);
4165 mddev
->sync_thread
= md_register_thread(md_do_sync
, mddev
,
4167 if (!mddev
->sync_thread
) {
4171 conf
->reshape_checkpoint
= jiffies
;
4172 md_wakeup_thread(mddev
->sync_thread
);
4173 md_new_event(mddev
);
4177 mddev
->recovery
= 0;
4178 spin_lock_irq(&conf
->device_lock
);
4179 conf
->geo
= conf
->prev
;
4180 mddev
->raid_disks
= conf
->geo
.raid_disks
;
4181 rdev_for_each(rdev
, mddev
)
4182 rdev
->new_data_offset
= rdev
->data_offset
;
4184 conf
->reshape_progress
= MaxSector
;
4185 mddev
->reshape_position
= MaxSector
;
4186 spin_unlock_irq(&conf
->device_lock
);
4190 /* Calculate the last device-address that could contain
4191 * any block from the chunk that includes the array-address 's'
4192 * and report the next address.
4193 * i.e. the address returned will be chunk-aligned and after
4194 * any data that is in the chunk containing 's'.
4196 static sector_t
last_dev_address(sector_t s
, struct geom
*geo
)
4198 s
= (s
| geo
->chunk_mask
) + 1;
4199 s
>>= geo
->chunk_shift
;
4200 s
*= geo
->near_copies
;
4201 s
= DIV_ROUND_UP_SECTOR_T(s
, geo
->raid_disks
);
4202 s
*= geo
->far_copies
;
4203 s
<<= geo
->chunk_shift
;
4207 /* Calculate the first device-address that could contain
4208 * any block from the chunk that includes the array-address 's'.
4209 * This too will be the start of a chunk
4211 static sector_t
first_dev_address(sector_t s
, struct geom
*geo
)
4213 s
>>= geo
->chunk_shift
;
4214 s
*= geo
->near_copies
;
4215 sector_div(s
, geo
->raid_disks
);
4216 s
*= geo
->far_copies
;
4217 s
<<= geo
->chunk_shift
;
4221 static sector_t
reshape_request(struct mddev
*mddev
, sector_t sector_nr
,
4224 /* We simply copy at most one chunk (smallest of old and new)
4225 * at a time, possibly less if that exceeds RESYNC_PAGES,
4226 * or we hit a bad block or something.
4227 * This might mean we pause for normal IO in the middle of
4228 * a chunk, but that is not a problem was mddev->reshape_position
4229 * can record any location.
4231 * If we will want to write to a location that isn't
4232 * yet recorded as 'safe' (i.e. in metadata on disk) then
4233 * we need to flush all reshape requests and update the metadata.
4235 * When reshaping forwards (e.g. to more devices), we interpret
4236 * 'safe' as the earliest block which might not have been copied
4237 * down yet. We divide this by previous stripe size and multiply
4238 * by previous stripe length to get lowest device offset that we
4239 * cannot write to yet.
4240 * We interpret 'sector_nr' as an address that we want to write to.
4241 * From this we use last_device_address() to find where we might
4242 * write to, and first_device_address on the 'safe' position.
4243 * If this 'next' write position is after the 'safe' position,
4244 * we must update the metadata to increase the 'safe' position.
4246 * When reshaping backwards, we round in the opposite direction
4247 * and perform the reverse test: next write position must not be
4248 * less than current safe position.
4250 * In all this the minimum difference in data offsets
4251 * (conf->offset_diff - always positive) allows a bit of slack,
4252 * so next can be after 'safe', but not by more than offset_disk
4254 * We need to prepare all the bios here before we start any IO
4255 * to ensure the size we choose is acceptable to all devices.
4256 * The means one for each copy for write-out and an extra one for
4258 * We store the read-in bio in ->master_bio and the others in
4259 * ->devs[x].bio and ->devs[x].repl_bio.
4261 struct r10conf
*conf
= mddev
->private;
4262 struct r10bio
*r10_bio
;
4263 sector_t next
, safe
, last
;
4267 struct md_rdev
*rdev
;
4270 struct bio
*bio
, *read_bio
;
4271 int sectors_done
= 0;
4273 if (sector_nr
== 0) {
4274 /* If restarting in the middle, skip the initial sectors */
4275 if (mddev
->reshape_backwards
&&
4276 conf
->reshape_progress
< raid10_size(mddev
, 0, 0)) {
4277 sector_nr
= (raid10_size(mddev
, 0, 0)
4278 - conf
->reshape_progress
);
4279 } else if (!mddev
->reshape_backwards
&&
4280 conf
->reshape_progress
> 0)
4281 sector_nr
= conf
->reshape_progress
;
4283 mddev
->curr_resync_completed
= sector_nr
;
4284 sysfs_notify(&mddev
->kobj
, NULL
, "sync_completed");
4290 /* We don't use sector_nr to track where we are up to
4291 * as that doesn't work well for ->reshape_backwards.
4292 * So just use ->reshape_progress.
4294 if (mddev
->reshape_backwards
) {
4295 /* 'next' is the earliest device address that we might
4296 * write to for this chunk in the new layout
4298 next
= first_dev_address(conf
->reshape_progress
- 1,
4301 /* 'safe' is the last device address that we might read from
4302 * in the old layout after a restart
4304 safe
= last_dev_address(conf
->reshape_safe
- 1,
4307 if (next
+ conf
->offset_diff
< safe
)
4310 last
= conf
->reshape_progress
- 1;
4311 sector_nr
= last
& ~(sector_t
)(conf
->geo
.chunk_mask
4312 & conf
->prev
.chunk_mask
);
4313 if (sector_nr
+ RESYNC_BLOCK_SIZE
/512 < last
)
4314 sector_nr
= last
+ 1 - RESYNC_BLOCK_SIZE
/512;
4316 /* 'next' is after the last device address that we
4317 * might write to for this chunk in the new layout
4319 next
= last_dev_address(conf
->reshape_progress
, &conf
->geo
);
4321 /* 'safe' is the earliest device address that we might
4322 * read from in the old layout after a restart
4324 safe
= first_dev_address(conf
->reshape_safe
, &conf
->prev
);
4326 /* Need to update metadata if 'next' might be beyond 'safe'
4327 * as that would possibly corrupt data
4329 if (next
> safe
+ conf
->offset_diff
)
4332 sector_nr
= conf
->reshape_progress
;
4333 last
= sector_nr
| (conf
->geo
.chunk_mask
4334 & conf
->prev
.chunk_mask
);
4336 if (sector_nr
+ RESYNC_BLOCK_SIZE
/512 <= last
)
4337 last
= sector_nr
+ RESYNC_BLOCK_SIZE
/512 - 1;
4341 time_after(jiffies
, conf
->reshape_checkpoint
+ 10*HZ
)) {
4342 /* Need to update reshape_position in metadata */
4344 mddev
->reshape_position
= conf
->reshape_progress
;
4345 if (mddev
->reshape_backwards
)
4346 mddev
->curr_resync_completed
= raid10_size(mddev
, 0, 0)
4347 - conf
->reshape_progress
;
4349 mddev
->curr_resync_completed
= conf
->reshape_progress
;
4350 conf
->reshape_checkpoint
= jiffies
;
4351 set_bit(MD_CHANGE_DEVS
, &mddev
->flags
);
4352 md_wakeup_thread(mddev
->thread
);
4353 wait_event(mddev
->sb_wait
, mddev
->flags
== 0 ||
4354 kthread_should_stop());
4355 conf
->reshape_safe
= mddev
->reshape_position
;
4356 allow_barrier(conf
);
4360 /* Now schedule reads for blocks from sector_nr to last */
4361 r10_bio
= mempool_alloc(conf
->r10buf_pool
, GFP_NOIO
);
4362 raise_barrier(conf
, sectors_done
!= 0);
4363 atomic_set(&r10_bio
->remaining
, 0);
4364 r10_bio
->mddev
= mddev
;
4365 r10_bio
->sector
= sector_nr
;
4366 set_bit(R10BIO_IsReshape
, &r10_bio
->state
);
4367 r10_bio
->sectors
= last
- sector_nr
+ 1;
4368 rdev
= read_balance(conf
, r10_bio
, &max_sectors
);
4369 BUG_ON(!test_bit(R10BIO_Previous
, &r10_bio
->state
));
4372 /* Cannot read from here, so need to record bad blocks
4373 * on all the target devices.
4376 set_bit(MD_RECOVERY_INTR
, &mddev
->recovery
);
4377 return sectors_done
;
4380 read_bio
= bio_alloc_mddev(GFP_KERNEL
, RESYNC_PAGES
, mddev
);
4382 read_bio
->bi_bdev
= rdev
->bdev
;
4383 read_bio
->bi_sector
= (r10_bio
->devs
[r10_bio
->read_slot
].addr
4384 + rdev
->data_offset
);
4385 read_bio
->bi_private
= r10_bio
;
4386 read_bio
->bi_end_io
= end_sync_read
;
4387 read_bio
->bi_rw
= READ
;
4388 read_bio
->bi_flags
&= ~(BIO_POOL_MASK
- 1);
4389 read_bio
->bi_flags
|= 1 << BIO_UPTODATE
;
4390 read_bio
->bi_vcnt
= 0;
4391 read_bio
->bi_size
= 0;
4392 r10_bio
->master_bio
= read_bio
;
4393 r10_bio
->read_slot
= r10_bio
->devs
[r10_bio
->read_slot
].devnum
;
4395 /* Now find the locations in the new layout */
4396 __raid10_find_phys(&conf
->geo
, r10_bio
);
4399 read_bio
->bi_next
= NULL
;
4401 for (s
= 0; s
< conf
->copies
*2; s
++) {
4403 int d
= r10_bio
->devs
[s
/2].devnum
;
4404 struct md_rdev
*rdev2
;
4406 rdev2
= conf
->mirrors
[d
].replacement
;
4407 b
= r10_bio
->devs
[s
/2].repl_bio
;
4409 rdev2
= conf
->mirrors
[d
].rdev
;
4410 b
= r10_bio
->devs
[s
/2].bio
;
4412 if (!rdev2
|| test_bit(Faulty
, &rdev2
->flags
))
4416 b
->bi_bdev
= rdev2
->bdev
;
4417 b
->bi_sector
= r10_bio
->devs
[s
/2].addr
+ rdev2
->new_data_offset
;
4418 b
->bi_private
= r10_bio
;
4419 b
->bi_end_io
= end_reshape_write
;
4425 /* Now add as many pages as possible to all of these bios. */
4428 for (s
= 0 ; s
< max_sectors
; s
+= PAGE_SIZE
>> 9) {
4429 struct page
*page
= r10_bio
->devs
[0].bio
->bi_io_vec
[s
/(PAGE_SIZE
>>9)].bv_page
;
4430 int len
= (max_sectors
- s
) << 9;
4431 if (len
> PAGE_SIZE
)
4433 for (bio
= blist
; bio
; bio
= bio
->bi_next
) {
4435 if (bio_add_page(bio
, page
, len
, 0))
4438 /* Didn't fit, must stop */
4440 bio2
&& bio2
!= bio
;
4441 bio2
= bio2
->bi_next
) {
4442 /* Remove last page from this bio */
4444 bio2
->bi_size
-= len
;
4445 bio2
->bi_flags
&= ~(1<<BIO_SEG_VALID
);
4449 sector_nr
+= len
>> 9;
4450 nr_sectors
+= len
>> 9;
4453 r10_bio
->sectors
= nr_sectors
;
4455 /* Now submit the read */
4456 md_sync_acct(read_bio
->bi_bdev
, r10_bio
->sectors
);
4457 atomic_inc(&r10_bio
->remaining
);
4458 read_bio
->bi_next
= NULL
;
4459 generic_make_request(read_bio
);
4460 sector_nr
+= nr_sectors
;
4461 sectors_done
+= nr_sectors
;
4462 if (sector_nr
<= last
)
4465 /* Now that we have done the whole section we can
4466 * update reshape_progress
4468 if (mddev
->reshape_backwards
)
4469 conf
->reshape_progress
-= sectors_done
;
4471 conf
->reshape_progress
+= sectors_done
;
4473 return sectors_done
;
4476 static void end_reshape_request(struct r10bio
*r10_bio
);
4477 static int handle_reshape_read_error(struct mddev
*mddev
,
4478 struct r10bio
*r10_bio
);
4479 static void reshape_request_write(struct mddev
*mddev
, struct r10bio
*r10_bio
)
4481 /* Reshape read completed. Hopefully we have a block
4483 * If we got a read error then we do sync 1-page reads from
4484 * elsewhere until we find the data - or give up.
4486 struct r10conf
*conf
= mddev
->private;
4489 if (!test_bit(R10BIO_Uptodate
, &r10_bio
->state
))
4490 if (handle_reshape_read_error(mddev
, r10_bio
) < 0) {
4491 /* Reshape has been aborted */
4492 md_done_sync(mddev
, r10_bio
->sectors
, 0);
4496 /* We definitely have the data in the pages, schedule the
4499 atomic_set(&r10_bio
->remaining
, 1);
4500 for (s
= 0; s
< conf
->copies
*2; s
++) {
4502 int d
= r10_bio
->devs
[s
/2].devnum
;
4503 struct md_rdev
*rdev
;
4505 rdev
= conf
->mirrors
[d
].replacement
;
4506 b
= r10_bio
->devs
[s
/2].repl_bio
;
4508 rdev
= conf
->mirrors
[d
].rdev
;
4509 b
= r10_bio
->devs
[s
/2].bio
;
4511 if (!rdev
|| test_bit(Faulty
, &rdev
->flags
))
4513 atomic_inc(&rdev
->nr_pending
);
4514 md_sync_acct(b
->bi_bdev
, r10_bio
->sectors
);
4515 atomic_inc(&r10_bio
->remaining
);
4517 generic_make_request(b
);
4519 end_reshape_request(r10_bio
);
4522 static void end_reshape(struct r10conf
*conf
)
4524 if (test_bit(MD_RECOVERY_INTR
, &conf
->mddev
->recovery
))
4527 spin_lock_irq(&conf
->device_lock
);
4528 conf
->prev
= conf
->geo
;
4529 md_finish_reshape(conf
->mddev
);
4531 conf
->reshape_progress
= MaxSector
;
4532 spin_unlock_irq(&conf
->device_lock
);
4534 /* read-ahead size must cover two whole stripes, which is
4535 * 2 * (datadisks) * chunksize where 'n' is the number of raid devices
4537 if (conf
->mddev
->queue
) {
4538 int stripe
= conf
->geo
.raid_disks
*
4539 ((conf
->mddev
->chunk_sectors
<< 9) / PAGE_SIZE
);
4540 stripe
/= conf
->geo
.near_copies
;
4541 if (conf
->mddev
->queue
->backing_dev_info
.ra_pages
< 2 * stripe
)
4542 conf
->mddev
->queue
->backing_dev_info
.ra_pages
= 2 * stripe
;
4548 static int handle_reshape_read_error(struct mddev
*mddev
,
4549 struct r10bio
*r10_bio
)
4551 /* Use sync reads to get the blocks from somewhere else */
4552 int sectors
= r10_bio
->sectors
;
4553 struct r10conf
*conf
= mddev
->private;
4555 struct r10bio r10_bio
;
4556 struct r10dev devs
[conf
->copies
];
4558 struct r10bio
*r10b
= &on_stack
.r10_bio
;
4561 struct bio_vec
*bvec
= r10_bio
->master_bio
->bi_io_vec
;
4563 r10b
->sector
= r10_bio
->sector
;
4564 __raid10_find_phys(&conf
->prev
, r10b
);
4569 int first_slot
= slot
;
4571 if (s
> (PAGE_SIZE
>> 9))
4575 int d
= r10b
->devs
[slot
].devnum
;
4576 struct md_rdev
*rdev
= conf
->mirrors
[d
].rdev
;
4579 test_bit(Faulty
, &rdev
->flags
) ||
4580 !test_bit(In_sync
, &rdev
->flags
))
4583 addr
= r10b
->devs
[slot
].addr
+ idx
* PAGE_SIZE
;
4584 success
= sync_page_io(rdev
,
4593 if (slot
>= conf
->copies
)
4595 if (slot
== first_slot
)
4599 /* couldn't read this block, must give up */
4600 set_bit(MD_RECOVERY_INTR
,
4610 static void end_reshape_write(struct bio
*bio
, int error
)
4612 int uptodate
= test_bit(BIO_UPTODATE
, &bio
->bi_flags
);
4613 struct r10bio
*r10_bio
= bio
->bi_private
;
4614 struct mddev
*mddev
= r10_bio
->mddev
;
4615 struct r10conf
*conf
= mddev
->private;
4619 struct md_rdev
*rdev
= NULL
;
4621 d
= find_bio_disk(conf
, r10_bio
, bio
, &slot
, &repl
);
4623 rdev
= conf
->mirrors
[d
].replacement
;
4626 rdev
= conf
->mirrors
[d
].rdev
;
4630 /* FIXME should record badblock */
4631 md_error(mddev
, rdev
);
4634 rdev_dec_pending(rdev
, mddev
);
4635 end_reshape_request(r10_bio
);
4638 static void end_reshape_request(struct r10bio
*r10_bio
)
4640 if (!atomic_dec_and_test(&r10_bio
->remaining
))
4642 md_done_sync(r10_bio
->mddev
, r10_bio
->sectors
, 1);
4643 bio_put(r10_bio
->master_bio
);
4647 static void raid10_finish_reshape(struct mddev
*mddev
)
4649 struct r10conf
*conf
= mddev
->private;
4651 if (test_bit(MD_RECOVERY_INTR
, &mddev
->recovery
))
4654 if (mddev
->delta_disks
> 0) {
4655 sector_t size
= raid10_size(mddev
, 0, 0);
4656 md_set_array_sectors(mddev
, size
);
4657 if (mddev
->recovery_cp
> mddev
->resync_max_sectors
) {
4658 mddev
->recovery_cp
= mddev
->resync_max_sectors
;
4659 set_bit(MD_RECOVERY_NEEDED
, &mddev
->recovery
);
4661 mddev
->resync_max_sectors
= size
;
4662 set_capacity(mddev
->gendisk
, mddev
->array_sectors
);
4663 revalidate_disk(mddev
->gendisk
);
4666 for (d
= conf
->geo
.raid_disks
;
4667 d
< conf
->geo
.raid_disks
- mddev
->delta_disks
;
4669 struct md_rdev
*rdev
= conf
->mirrors
[d
].rdev
;
4671 clear_bit(In_sync
, &rdev
->flags
);
4672 rdev
= conf
->mirrors
[d
].replacement
;
4674 clear_bit(In_sync
, &rdev
->flags
);
4677 mddev
->layout
= mddev
->new_layout
;
4678 mddev
->chunk_sectors
= 1 << conf
->geo
.chunk_shift
;
4679 mddev
->reshape_position
= MaxSector
;
4680 mddev
->delta_disks
= 0;
4681 mddev
->reshape_backwards
= 0;
4684 static struct md_personality raid10_personality
=
4688 .owner
= THIS_MODULE
,
4689 .make_request
= make_request
,
4693 .error_handler
= error
,
4694 .hot_add_disk
= raid10_add_disk
,
4695 .hot_remove_disk
= raid10_remove_disk
,
4696 .spare_active
= raid10_spare_active
,
4697 .sync_request
= sync_request
,
4698 .quiesce
= raid10_quiesce
,
4699 .size
= raid10_size
,
4700 .resize
= raid10_resize
,
4701 .takeover
= raid10_takeover
,
4702 .check_reshape
= raid10_check_reshape
,
4703 .start_reshape
= raid10_start_reshape
,
4704 .finish_reshape
= raid10_finish_reshape
,
4707 static int __init
raid_init(void)
4709 return register_md_personality(&raid10_personality
);
4712 static void raid_exit(void)
4714 unregister_md_personality(&raid10_personality
);
4717 module_init(raid_init
);
4718 module_exit(raid_exit
);
4719 MODULE_LICENSE("GPL");
4720 MODULE_DESCRIPTION("RAID10 (striped mirror) personality for MD");
4721 MODULE_ALIAS("md-personality-9"); /* RAID10 */
4722 MODULE_ALIAS("md-raid10");
4723 MODULE_ALIAS("md-level-10");
4725 module_param(max_queued_requests
, int, S_IRUGO
|S_IWUSR
);