drivers/media/i2c/m5mols/m5mols_reg.h

   1 /*
   2  * Register map for M-5MOLS 8M Pixel camera sensor with ISP
   3  *
   4  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
   5  * Author: HeungJun Kim <riverful.kim@samsung.com>
   6  *
   7  * Copyright (C) 2009 Samsung Electronics Co., Ltd.
   8  * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or
  13  * (at your option) any later version.
  14  */
  15
  16 #ifndef M5MOLS_REG_H
  17 #define M5MOLS_REG_H
  18
  19 #define M5MOLS_I2C_MAX_SIZE     4
  20 #define M5MOLS_BYTE_READ        0x01
  21 #define M5MOLS_BYTE_WRITE       0x02
  22
  23 #define I2C_CATEGORY(__cat)             ((__cat >> 16) & 0xff)
  24 #define I2C_COMMAND(__comm)             ((__comm >> 8) & 0xff)
  25 #define I2C_SIZE(__reg_s)               ((__reg_s) & 0xff)
  26 #define I2C_REG(__cat, __cmd, __reg_s)  ((__cat << 16) | (__cmd << 8) | __reg_s)
  27
  28 /*
  29  * Category section register
  30  *
  31  * The category means set including relevant command of M-5MOLS.
  32  */
  33 #define CAT_SYSTEM              0x00
  34 #define CAT_PARAM               0x01
  35 #define CAT_MONITOR             0x02
  36 #define CAT_AE                  0x03
  37 #define CAT_WB                  0x06
  38 #define CAT_EXIF                0x07
  39 #define CAT_FD                  0x09
  40 #define CAT_LENS                0x0a
  41 #define CAT_CAPT_PARM           0x0b
  42 #define CAT_CAPT_CTRL           0x0c
  43 #define CAT_FLASH               0x0f    /* related to FW, revisions, booting */
  44
  45 /*
  46  * Category 0 - SYSTEM mode
  47  *
  48  * The SYSTEM mode in the M-5MOLS means area available to handle with the whole
  49  * & all-round system of sensor. It deals with version/interrupt/setting mode &
  50  * even sensor's status. Especially, the M-5MOLS sensor with ISP varies by
  51  * packaging & manufacturer, even the customer and project code. And the
  52  * function details may vary among them. The version information helps to
  53  * determine what methods shall be used in the driver.
  54  *
  55  * There is many registers between customer version address and awb one. For
  56  * more specific contents, see definition if file m5mols.h.
  57  */
  58 #define SYSTEM_VER_CUSTOMER     I2C_REG(CAT_SYSTEM, 0x00, 1)
  59 #define SYSTEM_VER_PROJECT      I2C_REG(CAT_SYSTEM, 0x01, 1)
  60 #define SYSTEM_VER_FIRMWARE     I2C_REG(CAT_SYSTEM, 0x02, 2)
  61 #define SYSTEM_VER_HARDWARE     I2C_REG(CAT_SYSTEM, 0x04, 2)
  62 #define SYSTEM_VER_PARAMETER    I2C_REG(CAT_SYSTEM, 0x06, 2)
  63 #define SYSTEM_VER_AWB          I2C_REG(CAT_SYSTEM, 0x08, 2)
  64
  65 #define SYSTEM_SYSMODE          I2C_REG(CAT_SYSTEM, 0x0b, 1)
  66 #define REG_SYSINIT             0x00    /* SYSTEM mode */
  67 #define REG_PARAMETER           0x01    /* PARAMETER mode */
  68 #define REG_MONITOR             0x02    /* MONITOR mode */
  69 #define REG_CAPTURE             0x03    /* CAPTURE mode */
  70
  71 #define SYSTEM_CMD(__cmd)       I2C_REG(CAT_SYSTEM, cmd, 1)
  72 #define SYSTEM_VER_STRING       I2C_REG(CAT_SYSTEM, 0x0a, 1)
  73 #define REG_SAMSUNG_ELECTRO     "SE"    /* Samsung Electro-Mechanics */
  74 #define REG_SAMSUNG_OPTICS      "OP"    /* Samsung Fiber-Optics */
  75 #define REG_SAMSUNG_TECHWIN     "TB"    /* Samsung Techwin */
  76 /* SYSTEM mode status */
  77 #define SYSTEM_STATUS   I2C_REG(CAT_SYSTEM, 0x0c, 1)
  78
  79 /* Interrupt pending register */
  80 #define SYSTEM_INT_FACTOR       I2C_REG(CAT_SYSTEM, 0x10, 1)
  81 /* interrupt enable register */
  82 #define SYSTEM_INT_ENABLE       I2C_REG(CAT_SYSTEM, 0x11, 1)
  83 #define REG_INT_MODE            (1 << 0)
  84 #define REG_INT_AF              (1 << 1)
  85 #define REG_INT_ZOOM            (1 << 2)
  86 #define REG_INT_CAPTURE         (1 << 3)
  87 #define REG_INT_FRAMESYNC       (1 << 4)
  88 #define REG_INT_FD              (1 << 5)
  89 #define REG_INT_LENS_INIT       (1 << 6)
  90 #define REG_INT_SOUND           (1 << 7)
  91 #define REG_INT_MASK            0x0f
  92
  93 /*
  94  * category 1 - PARAMETER mode
  95  *
  96  * This category supports function of camera features of M-5MOLS. It means we
  97  * can handle with preview(MONITOR) resolution size/frame per second/interface
  98  * between the sensor and the Application Processor/even the image effect.
  99  */
 100
 101 /* Resolution in the MONITOR mode */
 102 #define PARM_MON_SIZE           I2C_REG(CAT_PARAM, 0x01, 1)
 103
 104 /* Frame rate */
 105 #define PARM_MON_FPS            I2C_REG(CAT_PARAM, 0x02, 1)
 106 #define REG_FPS_30              0x02
 107
 108 /* Video bus between the sensor and a host processor */
 109 #define PARM_INTERFACE          I2C_REG(CAT_PARAM, 0x00, 1)
 110 #define REG_INTERFACE_MIPI      0x02
 111
 112 /* Image effects */
 113 #define PARM_EFFECT             I2C_REG(CAT_PARAM, 0x0b, 1)
 114 #define REG_EFFECT_OFF          0x00
 115 #define REG_EFFECT_NEGA         0x01
 116 #define REG_EFFECT_EMBOSS       0x06
 117 #define REG_EFFECT_OUTLINE      0x07
 118 #define REG_EFFECT_WATERCOLOR   0x08
 119
 120 /*
 121  * Category 2 - MONITOR mode
 122  *
 123  * The MONITOR mode is same as preview mode as we said. The M-5MOLS has another
 124  * mode named "Preview", but this preview mode is used at the case specific
 125  * vider-recording mode. This mmode supports only YUYV format. On the other
 126  * hand, the JPEG & RAW formats is supports by CAPTURE mode. And, there are
 127  * another options like zoom/color effect(different with effect in PARAMETER
 128  * mode)/anti hand shaking algorithm.
 129  */
 130
 131 /* Target digital zoom position */
 132 #define MON_ZOOM                I2C_REG(CAT_MONITOR, 0x01, 1)
 133
 134 /* CR value for color effect */
 135 #define MON_CFIXR               I2C_REG(CAT_MONITOR, 0x0a, 1)
 136 /* CB value for color effect */
 137 #define MON_CFIXB               I2C_REG(CAT_MONITOR, 0x09, 1)
 138 #define REG_CFIXB_SEPIA         0xd8
 139 #define REG_CFIXR_SEPIA         0x18
 140
 141 #define MON_EFFECT              I2C_REG(CAT_MONITOR, 0x0b, 1)
 142 #define REG_COLOR_EFFECT_OFF    0x00
 143 #define REG_COLOR_EFFECT_ON     0x01
 144
 145 /* Chroma enable */
 146 #define MON_CHROMA_EN           I2C_REG(CAT_MONITOR, 0x10, 1)
 147 /* Chroma level */
 148 #define MON_CHROMA_LVL          I2C_REG(CAT_MONITOR, 0x0f, 1)
 149 #define REG_CHROMA_OFF          0x00
 150 #define REG_CHROMA_ON           0x01
 151
 152 /* Sharpness on/off */
 153 #define MON_EDGE_EN             I2C_REG(CAT_MONITOR, 0x12, 1)
 154 /* Sharpness level */
 155 #define MON_EDGE_LVL            I2C_REG(CAT_MONITOR, 0x11, 1)
 156 #define REG_EDGE_OFF            0x00
 157 #define REG_EDGE_ON             0x01
 158
 159 /* Set color tone (contrast) */
 160 #define MON_TONE_CTL            I2C_REG(CAT_MONITOR, 0x25, 1)
 161
 162 /*
 163  * Category 3 - Auto Exposure
 164  *
 165  * The M-5MOLS exposure capbility is detailed as which is similar to digital
 166  * camera. This category supports AE locking/various AE mode(range of exposure)
 167  * /ISO/flickering/EV bias/shutter/meteoring, and anything else. And the
 168  * maximum/minimum exposure gain value depending on M-5MOLS firmware, may be
 169  * different. So, this category also provide getting the max/min values. And,
 170  * each MONITOR and CAPTURE mode has each gain/shutter/max exposure values.
 171  */
 172
 173 /* Auto Exposure locking */
 174 #define AE_LOCK                 I2C_REG(CAT_AE, 0x00, 1)
 175 #define REG_AE_UNLOCK           0x00
 176 #define REG_AE_LOCK             0x01
 177
 178 /* Auto Exposure algorithm mode */
 179 #define AE_MODE                 I2C_REG(CAT_AE, 0x01, 1)
 180 #define REG_AE_OFF              0x00    /* AE off */
 181 #define REG_AE_ALL              0x01    /* calc AE in all block integral */
 182 #define REG_AE_CENTER           0x03    /* calc AE in center weighted */
 183 #define REG_AE_SPOT             0x06    /* calc AE in specific spot */
 184
 185 #define AE_ISO                  I2C_REG(CAT_AE, 0x05, 1)
 186 #define REG_ISO_AUTO            0x00
 187 #define REG_ISO_50              0x01
 188 #define REG_ISO_100             0x02
 189 #define REG_ISO_200             0x03
 190 #define REG_ISO_400             0x04
 191 #define REG_ISO_800             0x05
 192
 193 /* EV (scenemode) preset for MONITOR */
 194 #define AE_EV_PRESET_MONITOR    I2C_REG(CAT_AE, 0x0a, 1)
 195 /* EV (scenemode) preset for CAPTURE */
 196 #define AE_EV_PRESET_CAPTURE    I2C_REG(CAT_AE, 0x0b, 1)
 197 #define REG_SCENE_NORMAL        0x00
 198 #define REG_SCENE_PORTRAIT      0x01
 199 #define REG_SCENE_LANDSCAPE     0x02
 200 #define REG_SCENE_SPORTS        0x03
 201 #define REG_SCENE_PARTY_INDOOR  0x04
 202 #define REG_SCENE_BEACH_SNOW    0x05
 203 #define REG_SCENE_SUNSET        0x06
 204 #define REG_SCENE_DAWN_DUSK     0x07
 205 #define REG_SCENE_FALL          0x08
 206 #define REG_SCENE_NIGHT         0x09
 207 #define REG_SCENE_AGAINST_LIGHT 0x0a
 208 #define REG_SCENE_FIRE          0x0b
 209 #define REG_SCENE_TEXT          0x0c
 210 #define REG_SCENE_CANDLE        0x0d
 211
 212 /* Manual gain in MONITOR mode */
 213 #define AE_MAN_GAIN_MON         I2C_REG(CAT_AE, 0x12, 2)
 214 /* Maximum gain in MONITOR mode */
 215 #define AE_MAX_GAIN_MON         I2C_REG(CAT_AE, 0x1a, 2)
 216 /* Manual gain in CAPTURE mode */
 217 #define AE_MAN_GAIN_CAP         I2C_REG(CAT_AE, 0x26, 2)
 218
 219 #define AE_INDEX                I2C_REG(CAT_AE, 0x38, 1)
 220 #define REG_AE_INDEX_20_NEG     0x00
 221 #define REG_AE_INDEX_15_NEG     0x01
 222 #define REG_AE_INDEX_10_NEG     0x02
 223 #define REG_AE_INDEX_05_NEG     0x03
 224 #define REG_AE_INDEX_00         0x04
 225 #define REG_AE_INDEX_05_POS     0x05
 226 #define REG_AE_INDEX_10_POS     0x06
 227 #define REG_AE_INDEX_15_POS     0x07
 228 #define REG_AE_INDEX_20_POS     0x08
 229
 230 /*
 231  * Category 6 - White Balance
 232  */
 233
 234 /* Auto Whitebalance locking */
 235 #define AWB_LOCK                I2C_REG(CAT_WB, 0x00, 1)
 236 #define REG_AWB_UNLOCK          0x00
 237 #define REG_AWB_LOCK            0x01
 238
 239 #define AWB_MODE                I2C_REG(CAT_WB, 0x02, 1)
 240 #define REG_AWB_AUTO            0x01    /* AWB off */
 241 #define REG_AWB_PRESET          0x02    /* AWB preset */
 242
 243 /* Manual WB (preset) */
 244 #define AWB_MANUAL              I2C_REG(CAT_WB, 0x03, 1)
 245 #define REG_AWB_INCANDESCENT    0x01
 246 #define REG_AWB_FLUORESCENT_1   0x02
 247 #define REG_AWB_FLUORESCENT_2   0x03
 248 #define REG_AWB_DAYLIGHT        0x04
 249 #define REG_AWB_CLOUDY          0x05
 250 #define REG_AWB_SHADE           0x06
 251 #define REG_AWB_HORIZON         0x07
 252 #define REG_AWB_LEDLIGHT        0x09
 253
 254 /*
 255  * Category 7 - EXIF information
 256  */
 257 #define EXIF_INFO_EXPTIME_NU    I2C_REG(CAT_EXIF, 0x00, 4)
 258 #define EXIF_INFO_EXPTIME_DE    I2C_REG(CAT_EXIF, 0x04, 4)
 259 #define EXIF_INFO_TV_NU         I2C_REG(CAT_EXIF, 0x08, 4)
 260 #define EXIF_INFO_TV_DE         I2C_REG(CAT_EXIF, 0x0c, 4)
 261 #define EXIF_INFO_AV_NU         I2C_REG(CAT_EXIF, 0x10, 4)
 262 #define EXIF_INFO_AV_DE         I2C_REG(CAT_EXIF, 0x14, 4)
 263 #define EXIF_INFO_BV_NU         I2C_REG(CAT_EXIF, 0x18, 4)
 264 #define EXIF_INFO_BV_DE         I2C_REG(CAT_EXIF, 0x1c, 4)
 265 #define EXIF_INFO_EBV_NU        I2C_REG(CAT_EXIF, 0x20, 4)
 266 #define EXIF_INFO_EBV_DE        I2C_REG(CAT_EXIF, 0x24, 4)
 267 #define EXIF_INFO_ISO           I2C_REG(CAT_EXIF, 0x28, 2)
 268 #define EXIF_INFO_FLASH         I2C_REG(CAT_EXIF, 0x2a, 2)
 269 #define EXIF_INFO_SDR           I2C_REG(CAT_EXIF, 0x2c, 2)
 270 #define EXIF_INFO_QVAL          I2C_REG(CAT_EXIF, 0x2e, 2)
 271
 272 /*
 273  * Category 9 - Face Detection
 274  */
 275 #define FD_CTL                  I2C_REG(CAT_FD, 0x00, 1)
 276 #define BIT_FD_EN               0
 277 #define BIT_FD_DRAW_FACE_FRAME  4
 278 #define BIT_FD_DRAW_SMILE_LVL   6
 279 #define REG_FD(shift)           (1 << shift)
 280 #define REG_FD_OFF              0x0
 281
 282 /*
 283  * Category A - Lens Parameter
 284  */
 285 #define AF_MODE                 I2C_REG(CAT_LENS, 0x01, 1)
 286 #define REG_AF_NORMAL           0x00    /* Normal AF, one time */
 287 #define REG_AF_MACRO            0x01    /* Macro AF, one time */
 288 #define REG_AF_POWEROFF         0x07
 289
 290 #define AF_EXECUTE              I2C_REG(CAT_LENS, 0x02, 1)
 291 #define REG_AF_STOP             0x00
 292 #define REG_AF_EXE_AUTO         0x01
 293 #define REG_AF_EXE_CAF          0x02
 294
 295 #define AF_STATUS               I2C_REG(CAT_LENS, 0x03, 1)
 296 #define REG_AF_FAIL             0x00
 297 #define REG_AF_SUCCESS          0x02
 298 #define REG_AF_IDLE             0x04
 299 #define REG_AF_BUSY             0x05
 300
 301 #define AF_VERSION              I2C_REG(CAT_LENS, 0x0a, 1)
 302
 303 /*
 304  * Category B - CAPTURE Parameter
 305  */
 306 #define CAPP_YUVOUT_MAIN        I2C_REG(CAT_CAPT_PARM, 0x00, 1)
 307 #define REG_YUV422              0x00
 308 #define REG_BAYER10             0x05
 309 #define REG_BAYER8              0x06
 310 #define REG_JPEG                0x10
 311
 312 #define CAPP_MAIN_IMAGE_SIZE    I2C_REG(CAT_CAPT_PARM, 0x01, 1)
 313 #define CAPP_JPEG_RATIO         I2C_REG(CAT_CAPT_PARM, 0x17, 1)
 314
 315 #define CAPP_MCC_MODE           I2C_REG(CAT_CAPT_PARM, 0x1d, 1)
 316 #define REG_MCC_OFF             0x00
 317 #define REG_MCC_NORMAL          0x01
 318
 319 #define CAPP_WDR_EN             I2C_REG(CAT_CAPT_PARM, 0x2c, 1)
 320 #define REG_WDR_OFF             0x00
 321 #define REG_WDR_ON              0x01
 322 #define REG_WDR_AUTO            0x02
 323
 324 #define CAPP_LIGHT_CTRL         I2C_REG(CAT_CAPT_PARM, 0x40, 1)
 325 #define REG_LIGHT_OFF           0x00
 326 #define REG_LIGHT_ON            0x01
 327 #define REG_LIGHT_AUTO          0x02
 328
 329 #define CAPP_FLASH_CTRL         I2C_REG(CAT_CAPT_PARM, 0x41, 1)
 330 #define REG_FLASH_OFF           0x00
 331 #define REG_FLASH_ON            0x01
 332 #define REG_FLASH_AUTO          0x02
 333
 334 /*
 335  * Category C - CAPTURE Control
 336  */
 337 #define CAPC_MODE               I2C_REG(CAT_CAPT_CTRL, 0x00, 1)
 338 #define REG_CAP_NONE            0x00
 339 #define REG_CAP_ANTI_SHAKE      0x02
 340
 341 /* Select single- or multi-shot capture */
 342 #define CAPC_SEL_FRAME          I2C_REG(CAT_CAPT_CTRL, 0x06, 1)
 343
 344 #define CAPC_START              I2C_REG(CAT_CAPT_CTRL, 0x09, 1)
 345 #define REG_CAP_START_MAIN      0x01
 346 #define REG_CAP_START_THUMB     0x03
 347
 348 #define CAPC_IMAGE_SIZE         I2C_REG(CAT_CAPT_CTRL, 0x0d, 4)
 349 #define CAPC_THUMB_SIZE         I2C_REG(CAT_CAPT_CTRL, 0x11, 4)
 350
 351 /*
 352  * Category F - Flash
 353  *
 354  * This mode provides functions about internal flash stuff and system startup.
 355  */
 356
 357 /* Starts internal ARM core booting after power-up */
 358 #define FLASH_CAM_START         I2C_REG(CAT_FLASH, 0x12, 1)
 359 #define REG_START_ARM_BOOT      0x01    /* write value */
 360 #define REG_IN_FLASH_MODE       0x00    /* read value */
 361
 362 #endif  /* M5MOLS_REG_H */