drivers/media/platform/Kconfig

   1 #
   2 # Platform drivers
   3 #       All drivers here are currently for webcam support
   4
   5 menuconfig V4L_PLATFORM_DRIVERS
   6         bool "V4L platform devices"
   7         depends on MEDIA_CAMERA_SUPPORT
   8         default n
   9         ---help---
  10           Say Y here to enable support for platform-specific V4L drivers.
  11
  12 if V4L_PLATFORM_DRIVERS
  13
  14 source "drivers/media/platform/marvell-ccic/Kconfig"
  15
  16 config VIDEO_VIA_CAMERA
  17         tristate "VIAFB camera controller support"
  18         depends on FB_VIA
  19         select VIDEOBUF_DMA_SG
  20         select VIDEO_OV7670
  21         help
  22            Driver support for the integrated camera controller in VIA
  23            Chrome9 chipsets.  Currently only tested on OLPC xo-1.5 systems
  24            with ov7670 sensors.
  25
  26 #
  27 # Platform multimedia device configuration
  28 #
  29
  30 source "drivers/media/platform/davinci/Kconfig"
  31
  32 source "drivers/media/platform/omap/Kconfig"
  33
  34 source "drivers/media/platform/blackfin/Kconfig"
  35
  36 config VIDEO_SH_VOU
  37         tristate "SuperH VOU video output driver"
  38         depends on MEDIA_CAMERA_SUPPORT
  39         depends on VIDEO_DEV && ARCH_SHMOBILE
  40         select VIDEOBUF_DMA_CONTIG
  41         help
  42           Support for the Video Output Unit (VOU) on SuperH SoCs.
  43
  44 config VIDEO_VIU
  45         tristate "Freescale VIU Video Driver"
  46         depends on VIDEO_V4L2 && PPC_MPC512x
  47         select VIDEOBUF_DMA_CONTIG
  48         default y
  49         ---help---
  50           Support for Freescale VIU video driver. This device captures
  51           video data, or overlays video on DIU frame buffer.
  52
  53           Say Y here if you want to enable VIU device on MPC5121e Rev2+.
  54           In doubt, say N.
  55
  56 config VIDEO_TIMBERDALE
  57         tristate "Support for timberdale Video In/LogiWIN"
  58         depends on VIDEO_V4L2 && I2C && DMADEVICES
  59         select DMA_ENGINE
  60         select TIMB_DMA
  61         select VIDEO_ADV7180
  62         select VIDEOBUF_DMA_CONTIG
  63         ---help---
  64           Add support for the Video In peripherial of the timberdale FPGA.
  65
  66 config VIDEO_VINO
  67         tristate "SGI Vino Video For Linux"
  68         depends on I2C && SGI_IP22 && VIDEO_V4L2
  69         select VIDEO_SAA7191 if MEDIA_SUBDRV_AUTOSELECT
  70         help
  71           Say Y here to build in support for the Vino video input system found
  72           on SGI Indy machines.
  73
  74 config VIDEO_M32R_AR
  75         tristate "AR devices"
  76         depends on M32R && VIDEO_V4L2
  77         ---help---
  78           This is a video4linux driver for the Renesas AR (Artificial Retina)
  79           camera module.
  80
  81 config VIDEO_M32R_AR_M64278
  82         tristate "AR device with color module M64278(VGA)"
  83         depends on PLAT_M32700UT
  84         select VIDEO_M32R_AR
  85         ---help---
  86           This is a video4linux driver for the Renesas AR (Artificial
  87           Retina) with M64278E-800 camera module.
  88           This module supports VGA(640x480 pixels) resolutions.
  89
  90           To compile this driver as a module, choose M here: the
  91           module will be called arv.
  92
  93 config VIDEO_OMAP2
  94         tristate "OMAP2 Camera Capture Interface driver"
  95         depends on VIDEO_DEV && ARCH_OMAP2 && VIDEO_V4L2_INT_DEVICE
  96         select VIDEOBUF_DMA_SG
  97         ---help---
  98           This is a v4l2 driver for the TI OMAP2 camera capture interface
  99
 100 config VIDEO_OMAP3
 101         tristate "OMAP 3 Camera support"
 102         depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3
 103         ---help---
 104           Driver for an OMAP 3 camera controller.
 105
 106 config VIDEO_OMAP3_DEBUG
 107         bool "OMAP 3 Camera debug messages"
 108         depends on VIDEO_OMAP3
 109         ---help---
 110           Enable debug messages on OMAP 3 camera controller driver.
 111
 112 config VIDEO_S3C_CAMIF
 113         tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
 114         depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
 115         depends on (PLAT_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME
 116         select VIDEOBUF2_DMA_CONTIG
 117         ---help---
 118           This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
 119           host interface (CAMIF).
 120
 121           To compile this driver as a module, choose M here: the module
 122           will be called s3c-camif.
 123
 124 source "drivers/media/platform/soc_camera/Kconfig"
 125 source "drivers/media/platform/s5p-fimc/Kconfig"
 126 source "drivers/media/platform/s5p-tv/Kconfig"
 127
 128 endif # V4L_PLATFORM_DRIVERS
 129
 130 menuconfig V4L_MEM2MEM_DRIVERS
 131         bool "Memory-to-memory multimedia devices"
 132         depends on VIDEO_V4L2
 133         depends on MEDIA_CAMERA_SUPPORT
 134         default n
 135         ---help---
 136           Say Y here to enable selecting drivers for V4L devices that
 137           use system memory for both source and destination buffers, as opposed
 138           to capture and output drivers, which use memory buffers for just
 139           one of those.
 140
 141 if V4L_MEM2MEM_DRIVERS
 142
 143 config VIDEO_CODA
 144         tristate "Chips&Media Coda multi-standard codec IP"
 145         depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_MXC
 146         select VIDEOBUF2_DMA_CONTIG
 147         select V4L2_MEM2MEM_DEV
 148         select IRAM_ALLOC if SOC_IMX53
 149         ---help---
 150            Coda is a range of video codec IPs that supports
 151            H.264, MPEG-4, and other video formats.
 152
 153 config VIDEO_MEM2MEM_DEINTERLACE
 154         tristate "Deinterlace support"
 155         depends on VIDEO_DEV && VIDEO_V4L2 && DMA_ENGINE
 156         select VIDEOBUF2_DMA_CONTIG
 157         select V4L2_MEM2MEM_DEV
 158         help
 159             Generic deinterlacing V4L2 driver.
 160
 161 config VIDEO_SAMSUNG_S5P_G2D
 162         tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
 163         depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
 164         select VIDEOBUF2_DMA_CONTIG
 165         select V4L2_MEM2MEM_DEV
 166         default n
 167         ---help---
 168           This is a v4l2 driver for Samsung S5P and EXYNOS4 G2D
 169           2d graphics accelerator.
 170
 171 config VIDEO_SAMSUNG_S5P_JPEG
 172         tristate "Samsung S5P/Exynos4 JPEG codec driver"
 173         depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
 174         select VIDEOBUF2_DMA_CONTIG
 175         select V4L2_MEM2MEM_DEV
 176         ---help---
 177           This is a v4l2 driver for Samsung S5P and EXYNOS4 JPEG codec
 178
 179 config VIDEO_SAMSUNG_S5P_MFC
 180         tristate "Samsung S5P MFC Video Codec"
 181         depends on VIDEO_DEV && VIDEO_V4L2 && PLAT_S5P
 182         select VIDEOBUF2_DMA_CONTIG
 183         default n
 184         help
 185             MFC 5.1 and 6.x driver for V4L2
 186
 187 config VIDEO_MX2_EMMAPRP
 188         tristate "MX2 eMMa-PrP support"
 189         depends on VIDEO_DEV && VIDEO_V4L2 && SOC_IMX27
 190         select VIDEOBUF2_DMA_CONTIG
 191         select V4L2_MEM2MEM_DEV
 192         help
 193             MX2X chips have a PrP that can be used to process buffers from
 194             memory to memory. Operations include resizing and format
 195             conversion.
 196
 197 config VIDEO_SAMSUNG_EXYNOS_GSC
 198         tristate "Samsung Exynos G-Scaler driver"
 199         depends on VIDEO_DEV && VIDEO_V4L2 && ARCH_EXYNOS5
 200         select VIDEOBUF2_DMA_CONTIG
 201         select V4L2_MEM2MEM_DEV
 202         help
 203           This is a v4l2 driver for Samsung EXYNOS5 SoC G-Scaler.
 204
 205 config VIDEO_SH_VEU
 206         tristate "SuperH VEU mem2mem video processing driver"
 207         depends on VIDEO_DEV && VIDEO_V4L2 && GENERIC_HARDIRQS
 208         select VIDEOBUF2_DMA_CONTIG
 209         select V4L2_MEM2MEM_DEV
 210         help
 211             Support for the Video Engine Unit (VEU) on SuperH and
 212             SH-Mobile SoCs.
 213
 214 endif # V4L_MEM2MEM_DRIVERS
 215
 216 menuconfig V4L_TEST_DRIVERS
 217         bool "Media test drivers"
 218         depends on MEDIA_CAMERA_SUPPORT
 219
 220 if V4L_TEST_DRIVERS
 221 config VIDEO_VIVI
 222         tristate "Virtual Video Driver"
 223         depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
 224         depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE
 225         select FONT_8x16
 226         select VIDEOBUF2_VMALLOC
 227         default n
 228         ---help---
 229           Enables a virtual video driver. This device shows a color bar
 230           and a timestamp, as a real device would generate by using V4L2
 231           api.
 232           Say Y here if you want to test video apps or debug V4L devices.
 233           In doubt, say N.
 234
 235 config VIDEO_MEM2MEM_TESTDEV
 236         tristate "Virtual test device for mem2mem framework"
 237         depends on VIDEO_DEV && VIDEO_V4L2
 238         select VIDEOBUF2_VMALLOC
 239         select V4L2_MEM2MEM_DEV
 240         default n
 241         ---help---
 242           This is a virtual test device for the memory-to-memory driver
 243           framework.
 244 endif #V4L_TEST_DRIVERS