drivers/media/radio/Kconfig

   1 #
   2 # Multimedia Video device configuration
   3 #
   4
   5 menuconfig RADIO_ADAPTERS
   6         bool "Radio Adapters"
   7         depends on VIDEO_V4L2
   8         depends on MEDIA_RADIO_SUPPORT
   9         default y
  10         ---help---
  11           Say Y here to enable selecting AM/FM radio adapters.
  12
  13 if RADIO_ADAPTERS && VIDEO_V4L2
  14
  15 config RADIO_TEA575X
  16         tristate
  17
  18 config RADIO_SI470X
  19         bool "Silicon Labs Si470x FM Radio Receiver support"
  20         depends on VIDEO_V4L2
  21
  22 source "drivers/media/radio/si470x/Kconfig"
  23
  24 config RADIO_SI4713
  25         tristate "Silicon Labs Si4713 FM Radio with RDS Transmitter support"
  26         depends on VIDEO_V4L2
  27
  28 source "drivers/media/radio/si4713/Kconfig"
  29
  30 config RADIO_SI476X
  31         tristate "Silicon Laboratories Si476x I2C FM Radio"
  32         depends on I2C && VIDEO_V4L2
  33         depends on MFD_SI476X_CORE
  34         depends on SND_SOC
  35         select SND_SOC_SI476X
  36         ---help---
  37           Choose Y here if you have this FM radio chip.
  38
  39           In order to control your radio card, you will need to use programs
  40           that are compatible with the Video For Linux 2 API.  Information on
  41           this API and pointers to "v4l2" programs may be found at
  42           <file:Documentation/video4linux/API.html>.
  43
  44           To compile this driver as a module, choose M here: the
  45           module will be called radio-si476x.
  46
  47 config USB_MR800
  48         tristate "AverMedia MR 800 USB FM radio support"
  49         depends on USB && VIDEO_V4L2
  50         ---help---
  51           Say Y here if you want to connect this type of radio to your
  52           computer's USB port. Note that the audio is not digital, and
  53           you must connect the line out connector to a sound card or a
  54           set of speakers.
  55
  56           To compile this driver as a module, choose M here: the
  57           module will be called radio-mr800.
  58
  59 config USB_DSBR
  60         tristate "D-Link/GemTek USB FM radio support"
  61         depends on USB && VIDEO_V4L2
  62         ---help---
  63           Say Y here if you want to connect this type of radio to your
  64           computer's USB port. Note that the audio is not digital, and
  65           you must connect the line out connector to a sound card or a
  66           set of speakers.
  67
  68           To compile this driver as a module, choose M here: the
  69           module will be called dsbr100.
  70
  71 config RADIO_MAXIRADIO
  72         tristate "Guillemot MAXI Radio FM 2000 radio"
  73         depends on VIDEO_V4L2 && PCI
  74         select RADIO_TEA575X
  75         ---help---
  76           Choose Y here if you have this radio card.  This card may also be
  77           found as Gemtek PCI FM.
  78
  79           In order to control your radio card, you will need to use programs
  80           that are compatible with the Video For Linux API.  Information on
  81           this API and pointers to "v4l" programs may be found at
  82           <file:Documentation/video4linux/API.html>.
  83
  84           To compile this driver as a module, choose M here: the
  85           module will be called radio-maxiradio.
  86
  87 config RADIO_SHARK
  88         tristate "Griffin radioSHARK USB radio receiver"
  89         depends on USB
  90         select RADIO_TEA575X
  91         ---help---
  92           Choose Y here if you have this radio receiver.
  93
  94           There are 2 versions of this device, this driver is for version 1,
  95           which is white.
  96
  97           In order to control your radio card, you will need to use programs
  98           that are compatible with the Video For Linux API.  Information on
  99           this API and pointers to "v4l" programs may be found at
 100           <file:Documentation/video4linux/API.html>.
 101
 102           To compile this driver as a module, choose M here: the
 103           module will be called radio-shark.
 104
 105 config RADIO_SHARK2
 106         tristate "Griffin radioSHARK2 USB radio receiver"
 107         depends on USB
 108         ---help---
 109           Choose Y here if you have this radio receiver.
 110
 111           There are 2 versions of this device, this driver is for version 2,
 112           which is black.
 113
 114           In order to control your radio card, you will need to use programs
 115           that are compatible with the Video For Linux API.  Information on
 116           this API and pointers to "v4l" programs may be found at
 117           <file:Documentation/video4linux/API.html>.
 118
 119           To compile this driver as a module, choose M here: the
 120           module will be called radio-shark2.
 121
 122 config USB_KEENE
 123         tristate "Keene FM Transmitter USB support"
 124         depends on USB && VIDEO_V4L2
 125         ---help---
 126           Say Y here if you want to connect this type of FM transmitter
 127           to your computer's USB port.
 128
 129           To compile this driver as a module, choose M here: the
 130           module will be called radio-keene.
 131
 132 config USB_RAREMONO
 133         tristate "Thanko's Raremono AM/FM/SW radio support"
 134         depends on USB && VIDEO_V4L2
 135         ---help---
 136           The 'Thanko's Raremono' device contains the Si4734 chip from Silicon Labs Inc.
 137           It is one of the very few or perhaps the only consumer USB radio device
 138           to receive the AM/FM/SW bands.
 139
 140           Say Y here if you want to connect this type of AM/FM/SW receiver
 141           to your computer's USB port.
 142
 143           To compile this driver as a module, choose M here: the
 144           module will be called radio-raremono.
 145
 146 config USB_MA901
 147         tristate "Masterkit MA901 USB FM radio support"
 148         depends on USB && VIDEO_V4L2
 149         ---help---
 150           Say Y here if you want to connect this type of radio to your
 151           computer's USB port. Note that the audio is not digital, and
 152           you must connect the line out connector to a sound card or a
 153           set of speakers or headphones.
 154
 155           To compile this driver as a module, choose M here: the
 156           module will be called radio-ma901.
 157
 158 config RADIO_TEA5764
 159         tristate "TEA5764 I2C FM radio support"
 160         depends on I2C && VIDEO_V4L2
 161         ---help---
 162           Say Y here if you want to use the TEA5764 FM chip found in
 163           EZX phones. This FM chip is present in EZX phones from Motorola,
 164           connected to internal pxa I2C bus.
 165
 166           To compile this driver as a module, choose M here: the
 167           module will be called radio-tea5764.
 168
 169 config RADIO_TEA5764_XTAL
 170         bool "TEA5764 crystal reference"
 171         depends on RADIO_TEA5764=y
 172         default y
 173         help
 174           Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
 175           here if TEA5764 reference frequency is connected in FREQIN.
 176
 177 config RADIO_SAA7706H
 178         tristate "SAA7706H Car Radio DSP"
 179         depends on I2C && VIDEO_V4L2
 180         ---help---
 181           Say Y here if you want to use the SAA7706H Car radio Digital
 182           Signal Processor, found for instance on the Russellville development
 183           board. On the russellville the device is connected to internal
 184           timberdale I2C bus.
 185
 186           To compile this driver as a module, choose M here: the
 187           module will be called SAA7706H.
 188
 189 config RADIO_TEF6862
 190         tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
 191         depends on I2C && VIDEO_V4L2
 192         ---help---
 193           Say Y here if you want to use the TEF6862 Car Radio Enhanced
 194           Selectivity Tuner, found for instance on the Russellville development
 195           board. On the russellville the device is connected to internal
 196           timberdale I2C bus.
 197
 198           To compile this driver as a module, choose M here: the
 199           module will be called TEF6862.
 200
 201 config RADIO_TIMBERDALE
 202         tristate "Enable the Timberdale radio driver"
 203         depends on MFD_TIMBERDALE && VIDEO_V4L2
 204         depends on I2C  # for RADIO_SAA7706H
 205         select RADIO_TEF6862
 206         select RADIO_SAA7706H
 207         ---help---
 208           This is a kind of umbrella driver for the Radio Tuner and DSP
 209           found behind the Timberdale FPGA on the Russellville board.
 210           Enabling this driver will automatically select the DSP and tuner.
 211
 212 config RADIO_WL1273
 213         tristate "Texas Instruments WL1273 I2C FM Radio"
 214         depends on I2C && VIDEO_V4L2
 215         select MFD_CORE
 216         select MFD_WL1273_CORE
 217         select FW_LOADER
 218         ---help---
 219           Choose Y here if you have this FM radio chip.
 220
 221           In order to control your radio card, you will need to use programs
 222           that are compatible with the Video For Linux 2 API.  Information on
 223           this API and pointers to "v4l2" programs may be found at
 224           <file:Documentation/video4linux/API.html>.
 225
 226           To compile this driver as a module, choose M here: the
 227           module will be called radio-wl1273.
 228
 229 # TI's ST based wl128x FM radio
 230 source "drivers/media/radio/wl128x/Kconfig"
 231
 232 #
 233 # ISA drivers configuration
 234 #
 235
 236 menuconfig V4L_RADIO_ISA_DRIVERS
 237         bool "ISA radio devices"
 238         depends on ISA
 239         default n
 240         ---help---
 241           Say Y here to enable support for these ISA drivers.
 242
 243 if V4L_RADIO_ISA_DRIVERS
 244
 245 config RADIO_ISA
 246         depends on ISA
 247         tristate
 248
 249 config RADIO_CADET
 250         tristate "ADS Cadet AM/FM Tuner"
 251         depends on ISA && VIDEO_V4L2
 252         ---help---
 253           Choose Y here if you have one of these AM/FM radio cards, and then
 254           fill in the port address below.
 255
 256           To compile this driver as a module, choose M here: the
 257           module will be called radio-cadet.
 258
 259 config RADIO_RTRACK
 260         tristate "AIMSlab RadioTrack (aka RadioReveal) support"
 261         depends on ISA && VIDEO_V4L2
 262         select RADIO_ISA
 263         ---help---
 264           Choose Y here if you have one of these FM radio cards, and then fill
 265           in the port address below.
 266
 267           Note that newer AIMSlab RadioTrack cards have a different chipset
 268           and are not supported by this driver.  For these cards, use the
 269           RadioTrack II driver below.
 270
 271           If you have a GemTeks combined (PnP) sound- and radio card you must
 272           use this driver as a module and setup the card with isapnptools.
 273           You must also pass the module a suitable io parameter, 0x248 has
 274           been reported to be used by these cards.
 275
 276           More information is contained in the file
 277           <file:Documentation/video4linux/radiotrack.txt>.
 278
 279           To compile this driver as a module, choose M here: the
 280           module will be called radio-aimslab.
 281
 282 config RADIO_RTRACK_PORT
 283         hex "RadioTrack i/o port (0x20f or 0x30f)"
 284         depends on RADIO_RTRACK=y
 285         default "30f"
 286         help
 287           Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
 288           haven't changed the jumper setting on the card.
 289
 290 config RADIO_RTRACK2
 291         tristate "AIMSlab RadioTrack II support"
 292         depends on ISA && VIDEO_V4L2
 293         select RADIO_ISA
 294         ---help---
 295           Choose Y here if you have this FM radio card, and then fill in the
 296           port address below.
 297
 298           Note: this driver hasn't been tested since a long time due to lack
 299           of hardware. If you have this hardware, then please contact the
 300           linux-media mailinglist.
 301
 302           To compile this driver as a module, choose M here: the
 303           module will be called radio-rtrack2.
 304
 305 config RADIO_RTRACK2_PORT
 306         hex "RadioTrack II i/o port (0x20c or 0x30c)"
 307         depends on RADIO_RTRACK2=y
 308         default "30c"
 309         help
 310           Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
 311           haven't changed the jumper setting on the card.
 312
 313 config RADIO_AZTECH
 314         tristate "Aztech/Packard Bell Radio"
 315         depends on ISA && VIDEO_V4L2
 316         select RADIO_ISA
 317         ---help---
 318           Choose Y here if you have one of these FM radio cards, and then fill
 319           in the port address below.
 320
 321           To compile this driver as a module, choose M here: the
 322           module will be called radio-aztech.
 323
 324 config RADIO_AZTECH_PORT
 325         hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
 326         depends on RADIO_AZTECH=y
 327         default "350"
 328         help
 329           Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
 330           haven't changed the setting of jumper JP3 on the card.  Removing the
 331           jumper sets the card to 0x358.
 332
 333 config RADIO_GEMTEK
 334         tristate "GemTek Radio card (or compatible) support"
 335         depends on ISA && VIDEO_V4L2
 336         select RADIO_ISA
 337         ---help---
 338           Choose Y here if you have this FM radio card, and then fill in the
 339           I/O port address and settings below. The following cards either have
 340           GemTek Radio tuner or are rebranded GemTek Radio cards:
 341
 342           - Sound Vision 16 Gold with FM Radio
 343           - Typhoon Radio card (some models)
 344           - Hama Radio card
 345
 346           To compile this driver as a module, choose M here: the
 347           module will be called radio-gemtek.
 348
 349 config RADIO_GEMTEK_PORT
 350         hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
 351         depends on RADIO_GEMTEK=y
 352         default "34c"
 353         help
 354           Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
 355           card default is 0x34c, if you haven't changed the jumper setting
 356           on the card.
 357
 358           On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
 359           port is 0x20c, 0x248 or 0x28c.
 360
 361           If automatic I/O port probing is enabled this port will be used only
 362           in case of automatic probing failure, ie. as a fallback.
 363
 364 config RADIO_GEMTEK_PROBE
 365         bool "Automatic I/O port probing"
 366         depends on RADIO_GEMTEK=y
 367         default y
 368         help
 369           Say Y here to enable automatic probing for GemTek Radio card. The
 370           following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
 371           0x28c.
 372
 373 config RADIO_MIROPCM20
 374         tristate "miroSOUND PCM20 radio"
 375         depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND
 376         select SND_ISA
 377         select SND_MIRO
 378         ---help---
 379           Choose Y here if you have this FM radio card. You also need to enable
 380           the ALSA sound system. This choice automatically selects the ALSA
 381           sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
 382           is required for the radio-miropcm20.
 383
 384           To compile this driver as a module, choose M here: the
 385           module will be called radio-miropcm20.
 386
 387 config RADIO_SF16FMI
 388         tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio"
 389         depends on ISA && VIDEO_V4L2
 390         ---help---
 391           Choose Y here if you have one of these FM radio cards.
 392
 393           To compile this driver as a module, choose M here: the
 394           module will be called radio-sf16fmi.
 395
 396 config RADIO_SF16FMR2
 397         tristate "SF16-FMR2/SF16-FMD2 Radio"
 398         depends on ISA && VIDEO_V4L2
 399         select RADIO_TEA575X
 400         ---help---
 401           Choose Y here if you have one of these FM radio cards.
 402
 403           To compile this driver as a module, choose M here: the
 404           module will be called radio-sf16fmr2.
 405
 406 config RADIO_TERRATEC
 407         tristate "TerraTec ActiveRadio ISA Standalone"
 408         depends on ISA && VIDEO_V4L2
 409         select RADIO_ISA
 410         ---help---
 411           Choose Y here if you have this FM radio card.
 412
 413           Note: this driver hasn't been tested since a long time due to lack
 414           of hardware. If you have this hardware, then please contact the
 415           linux-media mailinglist.
 416
 417           To compile this driver as a module, choose M here: the
 418           module will be called radio-terratec.
 419
 420 config RADIO_TRUST
 421         tristate "Trust FM radio card"
 422         depends on ISA && VIDEO_V4L2
 423         select RADIO_ISA
 424         help
 425           This is a driver for the Trust FM radio cards. Say Y if you have
 426           such a card and want to use it under Linux.
 427
 428           Note: this driver hasn't been tested since a long time due to lack
 429           of hardware. If you have this hardware, then please contact the
 430           linux-media mailinglist.
 431
 432           To compile this driver as a module, choose M here: the
 433           module will be called radio-trust.
 434
 435 config RADIO_TRUST_PORT
 436         hex "Trust i/o port (usually 0x350 or 0x358)"
 437         depends on RADIO_TRUST=y
 438         default "350"
 439         help
 440           Enter the I/O port of your Trust FM radio card. If unsure, try the
 441           values "0x350" or "0x358".
 442
 443 config RADIO_TYPHOON
 444         tristate "Typhoon Radio (a.k.a. EcoRadio)"
 445         depends on ISA && VIDEO_V4L2
 446         select RADIO_ISA
 447         ---help---
 448           Choose Y here if you have one of these FM radio cards, and then fill
 449           in the port address and the frequency used for muting below.
 450
 451           Note: this driver hasn't been tested since a long time due to lack
 452           of hardware. If you have this hardware, then please contact the
 453           linux-media mailinglist.
 454
 455           To compile this driver as a module, choose M here: the
 456           module will be called radio-typhoon.
 457
 458 config RADIO_TYPHOON_PORT
 459         hex "Typhoon I/O port (0x316 or 0x336)"
 460         depends on RADIO_TYPHOON=y
 461         default "316"
 462         help
 463           Enter the I/O port of your Typhoon or EcoRadio radio card.
 464
 465 config RADIO_TYPHOON_MUTEFREQ
 466         int "Typhoon frequency set when muting the device (kHz)"
 467         depends on RADIO_TYPHOON=y
 468         default "87500"
 469         help
 470           Enter the frequency used for muting the radio. The device is never
 471           completely silent. If the volume is just turned down, you can still
 472           hear silent voices and music. For that reason, the frequency of the
 473           radio device is set to the frequency you can enter here whenever
 474           the device is muted. There should be no local radio station at that
 475           frequency.
 476
 477 config RADIO_ZOLTRIX
 478         tristate "Zoltrix Radio"
 479         depends on ISA && VIDEO_V4L2
 480         select RADIO_ISA
 481         ---help---
 482           Choose Y here if you have one of these FM radio cards, and then fill
 483           in the port address below.
 484
 485           Note: this driver hasn't been tested since a long time due to lack
 486           of hardware. If you have this hardware, then please contact the
 487           linux-media mailinglist.
 488
 489           To compile this driver as a module, choose M here: the
 490           module will be called radio-zoltrix.
 491
 492 config RADIO_ZOLTRIX_PORT
 493         hex "ZOLTRIX I/O port (0x20c or 0x30c)"
 494         depends on RADIO_ZOLTRIX=y
 495         default "20c"
 496         help
 497           Enter the I/O port of your Zoltrix radio card.
 498
 499 endif # V4L_RADIO_ISA_DRIVERS
 500
 501 endif # RADIO_ADAPTERS