2 DVB device driver for em28xx
4 (c) 2008-2011 Mauro Carvalho Chehab <mchehab@infradead.org>
6 (c) 2008 Devin Heitmueller <devin.heitmueller@gmail.com>
7 - Fixes for the driver to properly work with HVR-950
8 - Fixes for the driver to properly work with Pinnacle PCTV HD Pro Stick
9 - Fixes for the driver to properly work with AMD ATI TV Wonder HD 600
11 (c) 2008 Aidan Thornton <makosoft@googlemail.com>
13 (c) 2012 Frank Schäfer <fschaefer.oss@googlemail.com>
15 Based on cx88-dvb, saa7134-dvb and videobuf-dvb originally written by:
16 (c) 2004, 2005 Chris Pascoe <c.pascoe@itee.uq.edu.au>
17 (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
19 This program is free software; you can redistribute it and/or modify
20 it under the terms of the GNU General Public License as published by
21 the Free Software Foundation; either version 2 of the License.
24 #include <linux/kernel.h>
25 #include <linux/slab.h>
26 #include <linux/usb.h>
29 #include <media/v4l2-common.h>
30 #include <dvb_demux.h>
33 #include <media/tuner.h>
34 #include "tuner-simple.h"
35 #include <linux/gpio.h>
42 #include "mt352_priv.h" /* FIXME */
48 #include "tda18271c2dd.h"
55 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
56 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
57 MODULE_LICENSE("GPL");
59 static unsigned int debug
;
60 module_param(debug
, int, 0644);
61 MODULE_PARM_DESC(debug
, "enable debug messages [dvb]");
63 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr
);
65 #define dprintk(level, fmt, arg...) do { \
67 printk(KERN_DEBUG "%s/2-dvb: " fmt, dev->name, ## arg); \
71 struct dvb_frontend
*fe
[2];
73 /* feed count management */
77 /* general boilerplate stuff */
78 struct dvb_adapter adapter
;
79 struct dvb_demux demux
;
81 struct dmx_frontend fe_hw
;
82 struct dmx_frontend fe_mem
;
85 /* Due to DRX-K - probably need changes */
86 int (*gate_ctrl
)(struct dvb_frontend
*, int);
87 struct semaphore pll_mutex
;
93 static inline void print_err_status(struct em28xx
*dev
,
94 int packet
, int status
)
96 char *errmsg
= "Unknown";
100 errmsg
= "unlinked synchronuously";
103 errmsg
= "unlinked asynchronuously";
106 errmsg
= "Buffer error (overrun)";
109 errmsg
= "Stalled (device not responding)";
112 errmsg
= "Babble (bad cable?)";
115 errmsg
= "Bit-stuff error (bad cable?)";
118 errmsg
= "CRC/Timeout (could be anything)";
121 errmsg
= "Device does not respond";
125 dprintk(1, "URB status %d [%s].\n", status
, errmsg
);
127 dprintk(1, "URB packet %d, status %d [%s].\n",
128 packet
, status
, errmsg
);
132 static inline int em28xx_dvb_urb_data_copy(struct em28xx
*dev
, struct urb
*urb
)
134 int xfer_bulk
, num_packets
, i
;
139 if (dev
->disconnected
)
143 print_err_status(dev
, -1, urb
->status
);
145 xfer_bulk
= usb_pipebulk(urb
->pipe
);
147 if (xfer_bulk
) /* bulk */
150 num_packets
= urb
->number_of_packets
;
152 for (i
= 0; i
< num_packets
; i
++) {
154 if (urb
->status
< 0) {
155 print_err_status(dev
, i
, urb
->status
);
156 if (urb
->status
!= -EPROTO
)
159 dvb_dmx_swfilter(&dev
->dvb
->demux
, urb
->transfer_buffer
,
162 if (urb
->iso_frame_desc
[i
].status
< 0) {
163 print_err_status(dev
, i
,
164 urb
->iso_frame_desc
[i
].status
);
165 if (urb
->iso_frame_desc
[i
].status
!= -EPROTO
)
168 dvb_dmx_swfilter(&dev
->dvb
->demux
,
169 urb
->transfer_buffer
+
170 urb
->iso_frame_desc
[i
].offset
,
171 urb
->iso_frame_desc
[i
].actual_length
);
178 static int em28xx_start_streaming(struct em28xx_dvb
*dvb
)
181 struct em28xx_i2c_bus
*i2c_bus
= dvb
->adapter
.priv
;
182 struct em28xx
*dev
= i2c_bus
->dev
;
183 int dvb_max_packet_size
, packet_multiplier
, dvb_alt
;
185 if (dev
->dvb_xfer_bulk
) {
186 if (!dev
->dvb_ep_bulk
)
188 dvb_max_packet_size
= 512; /* USB 2.0 spec */
189 packet_multiplier
= EM28XX_DVB_BULK_PACKET_MULTIPLIER
;
192 if (!dev
->dvb_ep_isoc
)
194 dvb_max_packet_size
= dev
->dvb_max_pkt_size_isoc
;
195 if (dvb_max_packet_size
< 0)
196 return dvb_max_packet_size
;
197 packet_multiplier
= EM28XX_DVB_NUM_ISOC_PACKETS
;
198 dvb_alt
= dev
->dvb_alt_isoc
;
201 usb_set_interface(dev
->udev
, 0, dvb_alt
);
202 rc
= em28xx_set_mode(dev
, EM28XX_DIGITAL_MODE
);
206 dprintk(1, "Using %d buffers each with %d x %d bytes\n",
209 dvb_max_packet_size
);
211 return em28xx_init_usb_xfer(dev
, EM28XX_DIGITAL_MODE
,
216 em28xx_dvb_urb_data_copy
);
219 static int em28xx_stop_streaming(struct em28xx_dvb
*dvb
)
221 struct em28xx_i2c_bus
*i2c_bus
= dvb
->adapter
.priv
;
222 struct em28xx
*dev
= i2c_bus
->dev
;
224 em28xx_stop_urbs(dev
);
229 static int em28xx_start_feed(struct dvb_demux_feed
*feed
)
231 struct dvb_demux
*demux
= feed
->demux
;
232 struct em28xx_dvb
*dvb
= demux
->priv
;
235 if (!demux
->dmx
.frontend
)
238 mutex_lock(&dvb
->lock
);
242 if (dvb
->nfeeds
== 1) {
243 ret
= em28xx_start_streaming(dvb
);
248 mutex_unlock(&dvb
->lock
);
252 static int em28xx_stop_feed(struct dvb_demux_feed
*feed
)
254 struct dvb_demux
*demux
= feed
->demux
;
255 struct em28xx_dvb
*dvb
= demux
->priv
;
258 mutex_lock(&dvb
->lock
);
261 if (0 == dvb
->nfeeds
)
262 err
= em28xx_stop_streaming(dvb
);
264 mutex_unlock(&dvb
->lock
);
270 /* ------------------------------------------------------------------ */
271 static int em28xx_dvb_bus_ctrl(struct dvb_frontend
*fe
, int acquire
)
273 struct em28xx_i2c_bus
*i2c_bus
= fe
->dvb
->priv
;
274 struct em28xx
*dev
= i2c_bus
->dev
;
277 return em28xx_set_mode(dev
, EM28XX_DIGITAL_MODE
);
279 return em28xx_set_mode(dev
, EM28XX_SUSPEND
);
282 /* ------------------------------------------------------------------ */
284 static struct lgdt330x_config em2880_lgdt3303_dev
= {
285 .demod_address
= 0x0e,
286 .demod_chip
= LGDT3303
,
289 static struct lgdt3305_config em2870_lgdt3304_dev
= {
291 .demod_chip
= LGDT3304
,
292 .spectral_inversion
= 1,
294 .mpeg_mode
= LGDT3305_MPEG_PARALLEL
,
295 .tpclk_edge
= LGDT3305_TPCLK_FALLING_EDGE
,
296 .tpvalid_polarity
= LGDT3305_TP_VALID_HIGH
,
301 static struct s921_config sharp_isdbt
= {
302 .demod_address
= 0x30 >> 1
305 static struct zl10353_config em28xx_zl10353_with_xc3028
= {
306 .demod_address
= (0x1e >> 1),
312 static struct s5h1409_config em28xx_s5h1409_with_xc3028
= {
313 .demod_address
= 0x32 >> 1,
314 .output_mode
= S5H1409_PARALLEL_OUTPUT
,
315 .gpio
= S5H1409_GPIO_OFF
,
316 .inversion
= S5H1409_INVERSION_OFF
,
317 .status_mode
= S5H1409_DEMODLOCKING
,
318 .mpeg_timing
= S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
321 static struct tda18271_std_map kworld_a340_std_map
= {
322 .atsc_6
= { .if_freq
= 3250, .agc_mode
= 3, .std
= 0,
323 .if_lvl
= 1, .rfagc_top
= 0x37, },
324 .qam_6
= { .if_freq
= 4000, .agc_mode
= 3, .std
= 1,
325 .if_lvl
= 1, .rfagc_top
= 0x37, },
328 static struct tda18271_config kworld_a340_config
= {
329 .std_map
= &kworld_a340_std_map
,
332 static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate
= {
333 .demod_address
= (0x1e >> 1),
335 .disable_i2c_gate_ctrl
= 1,
340 static struct drxd_config em28xx_drxd
= {
341 .demod_address
= 0x70,
342 .demod_revision
= 0xa2,
343 .pll_type
= DRXD_PLL_NONE
,
347 .disable_i2c_gate_ctrl
= 1,
350 static struct drxk_config terratec_h5_drxk
= {
354 .microcode_name
= "dvb-usb-terratec-h5-drxk.fw",
355 .qam_demod_parameter_count
= 2,
356 .load_firmware_sync
= true,
359 static struct drxk_config hauppauge_930c_drxk
= {
363 .microcode_name
= "dvb-usb-hauppauge-hvr930c-drxk.fw",
365 .qam_demod_parameter_count
= 2,
366 .load_firmware_sync
= true,
369 static struct drxk_config terratec_htc_stick_drxk
= {
373 .microcode_name
= "dvb-usb-terratec-htc-stick-drxk.fw",
375 .qam_demod_parameter_count
= 2,
376 /* Required for the antenna_gpio to disable LNA. */
377 .antenna_dvbt
= true,
378 /* The windows driver uses the same. This will disable LNA. */
380 .load_firmware_sync
= true,
383 static struct drxk_config maxmedia_ub425_tc_drxk
= {
387 .load_firmware_sync
= true,
390 static struct drxk_config pctv_520e_drxk
= {
393 .microcode_name
= "dvb-demod-drxk-pctv.fw",
394 .qam_demod_parameter_count
= 2,
396 .antenna_dvbt
= true, /* disable LNA */
397 .antenna_gpio
= (1 << 2), /* disable LNA */
398 .load_firmware_sync
= true,
401 static int drxk_gate_ctrl(struct dvb_frontend
*fe
, int enable
)
403 struct em28xx_dvb
*dvb
= fe
->sec_priv
;
410 down(&dvb
->pll_mutex
);
411 status
= dvb
->gate_ctrl(fe
, 1);
413 status
= dvb
->gate_ctrl(fe
, 0);
419 static void hauppauge_hvr930c_init(struct em28xx
*dev
)
423 struct em28xx_reg_seq hauppauge_hvr930c_init
[] = {
424 {EM2874_R80_GPIO
, 0xff, 0xff, 0x65},
425 {EM2874_R80_GPIO
, 0xfb, 0xff, 0x32},
426 {EM2874_R80_GPIO
, 0xff, 0xff, 0xb8},
429 struct em28xx_reg_seq hauppauge_hvr930c_end
[] = {
430 {EM2874_R80_GPIO
, 0xef, 0xff, 0x01},
431 {EM2874_R80_GPIO
, 0xaf, 0xff, 0x65},
432 {EM2874_R80_GPIO
, 0xef, 0xff, 0x76},
433 {EM2874_R80_GPIO
, 0xef, 0xff, 0x01},
434 {EM2874_R80_GPIO
, 0xcf, 0xff, 0x0b},
435 {EM2874_R80_GPIO
, 0xef, 0xff, 0x40},
437 {EM2874_R80_GPIO
, 0xcf, 0xff, 0x65},
438 {EM2874_R80_GPIO
, 0xef, 0xff, 0x65},
439 {EM2874_R80_GPIO
, 0xcf, 0xff, 0x0b},
440 {EM2874_R80_GPIO
, 0xef, 0xff, 0x65},
449 {{ 0x06, 0x02, 0x00, 0x31 }, 4},
451 {{ 0x01, 0x02, 0x00, 0xc6 }, 4},
453 {{ 0x01, 0x00, 0xff, 0xaf }, 4},
454 {{ 0x01, 0x00, 0x03, 0xa0 }, 4},
456 {{ 0x01, 0x00, 0x73, 0xaf }, 4},
459 {{ 0x00, 0x04, 0x00, 0x0a }, 4},
461 {{ 0x04, 0x14, 0x00, 0x00 }, 4},
464 em28xx_gpio_set(dev
, hauppauge_hvr930c_init
);
465 em28xx_write_reg(dev
, EM28XX_R06_I2C_CLK
, 0x40);
467 em28xx_write_reg(dev
, EM28XX_R06_I2C_CLK
, 0x44);
470 dev
->i2c_client
[dev
->def_i2c_bus
].addr
= 0x82 >> 1;
472 for (i
= 0; i
< ARRAY_SIZE(regs
); i
++)
473 i2c_master_send(&dev
->i2c_client
[dev
->def_i2c_bus
], regs
[i
].r
, regs
[i
].len
);
474 em28xx_gpio_set(dev
, hauppauge_hvr930c_end
);
478 em28xx_write_reg(dev
, EM28XX_R06_I2C_CLK
, 0x44);
481 em28xx_write_reg(dev
, EM28XX_R06_I2C_CLK
, 0x45);
486 static void terratec_h5_init(struct em28xx
*dev
)
489 struct em28xx_reg_seq terratec_h5_init
[] = {
490 {EM28XX_R08_GPIO
, 0xff, 0xff, 10},
491 {EM2874_R80_GPIO
, 0xf6, 0xff, 100},
492 {EM2874_R80_GPIO
, 0xf2, 0xff, 50},
493 {EM2874_R80_GPIO
, 0xf6, 0xff, 100},
496 struct em28xx_reg_seq terratec_h5_end
[] = {
497 {EM2874_R80_GPIO
, 0xe6, 0xff, 100},
498 {EM2874_R80_GPIO
, 0xa6, 0xff, 50},
499 {EM2874_R80_GPIO
, 0xe6, 0xff, 100},
506 {{ 0x06, 0x02, 0x00, 0x31 }, 4},
508 {{ 0x01, 0x02, 0x00, 0xc6 }, 4},
510 {{ 0x01, 0x00, 0xff, 0xaf }, 4},
511 {{ 0x01, 0x00, 0x03, 0xa0 }, 4},
513 {{ 0x01, 0x00, 0x73, 0xaf }, 4},
516 {{ 0x00, 0x04, 0x00, 0x0a }, 4},
518 {{ 0x04, 0x14, 0x00, 0x00 }, 4},
521 em28xx_gpio_set(dev
, terratec_h5_init
);
522 em28xx_write_reg(dev
, EM28XX_R06_I2C_CLK
, 0x40);
524 em28xx_write_reg(dev
, EM28XX_R06_I2C_CLK
, 0x45);
527 dev
->i2c_client
[dev
->def_i2c_bus
].addr
= 0x82 >> 1;
529 for (i
= 0; i
< ARRAY_SIZE(regs
); i
++)
530 i2c_master_send(&dev
->i2c_client
[dev
->def_i2c_bus
], regs
[i
].r
, regs
[i
].len
);
531 em28xx_gpio_set(dev
, terratec_h5_end
);
534 static void terratec_htc_stick_init(struct em28xx
*dev
)
539 * GPIO configuration:
540 * 0xff: unknown (does not affect DVB-T).
541 * 0xf6: DRX-K (demodulator).
542 * 0xe6: unknown (does not affect DVB-T).
543 * 0xb6: unknown (does not affect DVB-T).
545 struct em28xx_reg_seq terratec_htc_stick_init
[] = {
546 {EM28XX_R08_GPIO
, 0xff, 0xff, 10},
547 {EM2874_R80_GPIO
, 0xf6, 0xff, 100},
548 {EM2874_R80_GPIO
, 0xe6, 0xff, 50},
549 {EM2874_R80_GPIO
, 0xf6, 0xff, 100},
552 struct em28xx_reg_seq terratec_htc_stick_end
[] = {
553 {EM2874_R80_GPIO
, 0xb6, 0xff, 100},
554 {EM2874_R80_GPIO
, 0xf6, 0xff, 50},
559 * Init the analog decoder (not yet supported), but
560 * it's probably still a good idea.
566 {{ 0x06, 0x02, 0x00, 0x31 }, 4},
568 {{ 0x01, 0x02, 0x00, 0xc6 }, 4},
570 {{ 0x01, 0x00, 0xff, 0xaf }, 4},
573 em28xx_gpio_set(dev
, terratec_htc_stick_init
);
575 em28xx_write_reg(dev
, EM28XX_R06_I2C_CLK
, 0x40);
577 em28xx_write_reg(dev
, EM28XX_R06_I2C_CLK
, 0x44);
580 dev
->i2c_client
[dev
->def_i2c_bus
].addr
= 0x82 >> 1;
582 for (i
= 0; i
< ARRAY_SIZE(regs
); i
++)
583 i2c_master_send(&dev
->i2c_client
[dev
->def_i2c_bus
], regs
[i
].r
, regs
[i
].len
);
585 em28xx_gpio_set(dev
, terratec_htc_stick_end
);
588 static void terratec_htc_usb_xs_init(struct em28xx
*dev
)
592 struct em28xx_reg_seq terratec_htc_usb_xs_init
[] = {
593 {EM28XX_R08_GPIO
, 0xff, 0xff, 10},
594 {EM2874_R80_GPIO
, 0xb2, 0xff, 100},
595 {EM2874_R80_GPIO
, 0xb2, 0xff, 50},
596 {EM2874_R80_GPIO
, 0xb6, 0xff, 100},
599 struct em28xx_reg_seq terratec_htc_usb_xs_end
[] = {
600 {EM2874_R80_GPIO
, 0xa6, 0xff, 100},
601 {EM2874_R80_GPIO
, 0xa6, 0xff, 50},
602 {EM2874_R80_GPIO
, 0xe6, 0xff, 100},
607 * Init the analog decoder (not yet supported), but
608 * it's probably still a good idea.
614 {{ 0x06, 0x02, 0x00, 0x31 }, 4},
616 {{ 0x01, 0x02, 0x00, 0xc6 }, 4},
618 {{ 0x01, 0x00, 0xff, 0xaf }, 4},
619 {{ 0x01, 0x00, 0x03, 0xa0 }, 4},
621 {{ 0x01, 0x00, 0x73, 0xaf }, 4},
624 {{ 0x00, 0x04, 0x00, 0x0a }, 4},
626 {{ 0x04, 0x14, 0x00, 0x00 }, 4},
629 em28xx_write_reg(dev
, EM28XX_R06_I2C_CLK
, 0x40);
631 em28xx_gpio_set(dev
, terratec_htc_usb_xs_init
);
633 em28xx_write_reg(dev
, EM28XX_R06_I2C_CLK
, 0x40);
635 em28xx_write_reg(dev
, EM28XX_R06_I2C_CLK
, 0x44);
638 dev
->i2c_client
[dev
->def_i2c_bus
].addr
= 0x82 >> 1;
640 for (i
= 0; i
< ARRAY_SIZE(regs
); i
++)
641 i2c_master_send(&dev
->i2c_client
[dev
->def_i2c_bus
], regs
[i
].r
, regs
[i
].len
);
643 em28xx_gpio_set(dev
, terratec_htc_usb_xs_end
);
646 static void pctv_520e_init(struct em28xx
*dev
)
649 * Init AVF4910B analog decoder. Looks like I2C traffic to
650 * digital demodulator and tuner are routed via AVF4910B.
657 {{ 0x06, 0x02, 0x00, 0x31 }, 4},
659 {{ 0x01, 0x02, 0x00, 0xc6 }, 4},
661 {{ 0x01, 0x00, 0xff, 0xaf }, 4},
662 {{ 0x01, 0x00, 0x03, 0xa0 }, 4},
664 {{ 0x01, 0x00, 0x73, 0xaf }, 4},
667 dev
->i2c_client
[dev
->def_i2c_bus
].addr
= 0x82 >> 1; /* 0x41 */
669 for (i
= 0; i
< ARRAY_SIZE(regs
); i
++)
670 i2c_master_send(&dev
->i2c_client
[dev
->def_i2c_bus
], regs
[i
].r
, regs
[i
].len
);
673 static int em28xx_pctv_290e_set_lna(struct dvb_frontend
*fe
)
675 struct dtv_frontend_properties
*c
= &fe
->dtv_property_cache
;
676 struct em28xx
*dev
= fe
->dvb
->priv
;
677 #ifdef CONFIG_GPIOLIB
678 struct em28xx_dvb
*dvb
= dev
->dvb
;
683 flags
= GPIOF_OUT_INIT_HIGH
; /* enable LNA */
685 flags
= GPIOF_OUT_INIT_LOW
; /* disable LNA */
687 ret
= gpio_request_one(dvb
->lna_gpio
, flags
, NULL
);
689 em28xx_errdev("gpio request failed %d\n", ret
);
691 gpio_free(dvb
->lna_gpio
);
695 dev_warn(&dev
->udev
->dev
, "%s: LNA control is disabled (lna=%u)\n",
696 KBUILD_MODNAME
, c
->lna
);
701 static int em28xx_mt352_terratec_xs_init(struct dvb_frontend
*fe
)
703 /* Values extracted from a USB trace of the Terratec Windows driver */
704 static u8 clock_config
[] = { CLOCK_CTL
, 0x38, 0x2c };
705 static u8 reset
[] = { RESET
, 0x80 };
706 static u8 adc_ctl_1_cfg
[] = { ADC_CTL_1
, 0x40 };
707 static u8 agc_cfg
[] = { AGC_TARGET
, 0x28, 0xa0 };
708 static u8 input_freq_cfg
[] = { INPUT_FREQ_1
, 0x31, 0xb8 };
709 static u8 rs_err_cfg
[] = { RS_ERR_PER_1
, 0x00, 0x4d };
710 static u8 capt_range_cfg
[] = { CAPT_RANGE
, 0x32 };
711 static u8 trl_nom_cfg
[] = { TRL_NOMINAL_RATE_1
, 0x64, 0x00 };
712 static u8 tps_given_cfg
[] = { TPS_GIVEN_1
, 0x40, 0x80, 0x50 };
713 static u8 tuner_go
[] = { TUNER_GO
, 0x01};
715 mt352_write(fe
, clock_config
, sizeof(clock_config
));
717 mt352_write(fe
, reset
, sizeof(reset
));
718 mt352_write(fe
, adc_ctl_1_cfg
, sizeof(adc_ctl_1_cfg
));
719 mt352_write(fe
, agc_cfg
, sizeof(agc_cfg
));
720 mt352_write(fe
, input_freq_cfg
, sizeof(input_freq_cfg
));
721 mt352_write(fe
, rs_err_cfg
, sizeof(rs_err_cfg
));
722 mt352_write(fe
, capt_range_cfg
, sizeof(capt_range_cfg
));
723 mt352_write(fe
, trl_nom_cfg
, sizeof(trl_nom_cfg
));
724 mt352_write(fe
, tps_given_cfg
, sizeof(tps_given_cfg
));
725 mt352_write(fe
, tuner_go
, sizeof(tuner_go
));
729 static struct mt352_config terratec_xs_mt352_cfg
= {
730 .demod_address
= (0x1e >> 1),
733 .demod_init
= em28xx_mt352_terratec_xs_init
,
736 static struct tda10023_config em28xx_tda10023_config
= {
737 .demod_address
= 0x0c,
741 static struct cxd2820r_config em28xx_cxd2820r_config
= {
742 .i2c_address
= (0xd8 >> 1),
743 .ts_mode
= CXD2820R_TS_SERIAL
,
746 static struct tda18271_config em28xx_cxd2820r_tda18271_config
= {
747 .output_opt
= TDA18271_OUTPUT_LT_OFF
,
748 .gate
= TDA18271_GATE_DIGITAL
,
751 static const struct tda10071_config em28xx_tda10071_config
= {
752 .demod_i2c_addr
= 0x55, /* (0xaa >> 1) */
753 .tuner_i2c_addr
= 0x14,
755 .ts_mode
= TDA10071_TS_SERIAL
,
757 .xtal
= 40444000, /* 40.444 MHz */
758 .pll_multiplier
= 20,
761 static const struct a8293_config em28xx_a8293_config
= {
762 .i2c_addr
= 0x08, /* (0x10 >> 1) */
765 static struct zl10353_config em28xx_zl10353_no_i2c_gate_dev
= {
766 .demod_address
= (0x1e >> 1),
767 .disable_i2c_gate_ctrl
= 1,
771 static struct qt1010_config em28xx_qt1010_config
= {
775 static const struct mb86a20s_config c3tech_duo_mb86a20s_config
= {
776 .demod_address
= 0x10,
780 static struct tda18271_std_map mb86a20s_tda18271_config
= {
781 .dvbt_6
= { .if_freq
= 4000, .agc_mode
= 3, .std
= 4,
782 .if_lvl
= 1, .rfagc_top
= 0x37, },
785 static struct tda18271_config c3tech_duo_tda18271_config
= {
786 .std_map
= &mb86a20s_tda18271_config
,
787 .gate
= TDA18271_GATE_DIGITAL
,
788 .small_i2c
= TDA18271_03_BYTE_CHUNK_INIT
,
792 /* ------------------------------------------------------------------ */
794 static int em28xx_attach_xc3028(u8 addr
, struct em28xx
*dev
)
796 struct dvb_frontend
*fe
;
797 struct xc2028_config cfg
;
799 memset(&cfg
, 0, sizeof(cfg
));
800 cfg
.i2c_adap
= &dev
->i2c_adap
[dev
->def_i2c_bus
];
803 if (!dev
->dvb
->fe
[0]) {
804 em28xx_errdev("/2: dvb frontend not attached. "
805 "Can't attach xc3028\n");
809 fe
= dvb_attach(xc2028_attach
, dev
->dvb
->fe
[0], &cfg
);
811 em28xx_errdev("/2: xc3028 attach failed\n");
812 dvb_frontend_detach(dev
->dvb
->fe
[0]);
813 dev
->dvb
->fe
[0] = NULL
;
817 em28xx_info("%s/2: xc3028 attached\n", dev
->name
);
822 /* ------------------------------------------------------------------ */
824 static int em28xx_register_dvb(struct em28xx_dvb
*dvb
, struct module
*module
,
825 struct em28xx
*dev
, struct device
*device
)
829 mutex_init(&dvb
->lock
);
831 /* register adapter */
832 result
= dvb_register_adapter(&dvb
->adapter
, dev
->name
, module
, device
,
835 printk(KERN_WARNING
"%s: dvb_register_adapter failed (errno = %d)\n",
840 /* Ensure all frontends negotiate bus access */
841 dvb
->fe
[0]->ops
.ts_bus_ctrl
= em28xx_dvb_bus_ctrl
;
843 dvb
->fe
[1]->ops
.ts_bus_ctrl
= em28xx_dvb_bus_ctrl
;
845 dvb
->adapter
.priv
= &dev
->i2c_bus
[dev
->def_i2c_bus
];
847 /* register frontend */
848 result
= dvb_register_frontend(&dvb
->adapter
, dvb
->fe
[0]);
850 printk(KERN_WARNING
"%s: dvb_register_frontend failed (errno = %d)\n",
855 /* register 2nd frontend */
857 result
= dvb_register_frontend(&dvb
->adapter
, dvb
->fe
[1]);
859 printk(KERN_WARNING
"%s: 2nd dvb_register_frontend failed (errno = %d)\n",
865 /* register demux stuff */
866 dvb
->demux
.dmx
.capabilities
=
867 DMX_TS_FILTERING
| DMX_SECTION_FILTERING
|
868 DMX_MEMORY_BASED_FILTERING
;
869 dvb
->demux
.priv
= dvb
;
870 dvb
->demux
.filternum
= 256;
871 dvb
->demux
.feednum
= 256;
872 dvb
->demux
.start_feed
= em28xx_start_feed
;
873 dvb
->demux
.stop_feed
= em28xx_stop_feed
;
875 result
= dvb_dmx_init(&dvb
->demux
);
877 printk(KERN_WARNING
"%s: dvb_dmx_init failed (errno = %d)\n",
882 dvb
->dmxdev
.filternum
= 256;
883 dvb
->dmxdev
.demux
= &dvb
->demux
.dmx
;
884 dvb
->dmxdev
.capabilities
= 0;
885 result
= dvb_dmxdev_init(&dvb
->dmxdev
, &dvb
->adapter
);
887 printk(KERN_WARNING
"%s: dvb_dmxdev_init failed (errno = %d)\n",
892 dvb
->fe_hw
.source
= DMX_FRONTEND_0
;
893 result
= dvb
->demux
.dmx
.add_frontend(&dvb
->demux
.dmx
, &dvb
->fe_hw
);
895 printk(KERN_WARNING
"%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
900 dvb
->fe_mem
.source
= DMX_MEMORY_FE
;
901 result
= dvb
->demux
.dmx
.add_frontend(&dvb
->demux
.dmx
, &dvb
->fe_mem
);
903 printk(KERN_WARNING
"%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
908 result
= dvb
->demux
.dmx
.connect_frontend(&dvb
->demux
.dmx
, &dvb
->fe_hw
);
910 printk(KERN_WARNING
"%s: connect_frontend failed (errno = %d)\n",
915 /* register network adapter */
916 dvb_net_init(&dvb
->adapter
, &dvb
->net
, &dvb
->demux
.dmx
);
920 dvb
->demux
.dmx
.remove_frontend(&dvb
->demux
.dmx
, &dvb
->fe_mem
);
922 dvb
->demux
.dmx
.remove_frontend(&dvb
->demux
.dmx
, &dvb
->fe_hw
);
924 dvb_dmxdev_release(&dvb
->dmxdev
);
926 dvb_dmx_release(&dvb
->demux
);
929 dvb_unregister_frontend(dvb
->fe
[1]);
930 dvb_unregister_frontend(dvb
->fe
[0]);
933 dvb_frontend_detach(dvb
->fe
[1]);
935 dvb_frontend_detach(dvb
->fe
[0]);
936 dvb_unregister_adapter(&dvb
->adapter
);
941 static void em28xx_unregister_dvb(struct em28xx_dvb
*dvb
)
943 dvb_net_release(&dvb
->net
);
944 dvb
->demux
.dmx
.remove_frontend(&dvb
->demux
.dmx
, &dvb
->fe_mem
);
945 dvb
->demux
.dmx
.remove_frontend(&dvb
->demux
.dmx
, &dvb
->fe_hw
);
946 dvb_dmxdev_release(&dvb
->dmxdev
);
947 dvb_dmx_release(&dvb
->demux
);
949 dvb_unregister_frontend(dvb
->fe
[1]);
950 dvb_unregister_frontend(dvb
->fe
[0]);
951 if (dvb
->fe
[1] && !dvb
->dont_attach_fe1
)
952 dvb_frontend_detach(dvb
->fe
[1]);
953 dvb_frontend_detach(dvb
->fe
[0]);
954 dvb_unregister_adapter(&dvb
->adapter
);
957 static int em28xx_dvb_init(struct em28xx
*dev
)
959 int result
= 0, mfe_shared
= 0;
960 struct em28xx_dvb
*dvb
;
962 if (!dev
->board
.has_dvb
) {
963 /* This device does not support the extension */
964 printk(KERN_INFO
"em28xx_dvb: This device does not support the extension\n");
968 dvb
= kzalloc(sizeof(struct em28xx_dvb
), GFP_KERNEL
);
971 em28xx_info("em28xx_dvb: memory allocation failed\n");
975 dvb
->fe
[0] = dvb
->fe
[1] = NULL
;
977 mutex_lock(&dev
->lock
);
978 em28xx_set_mode(dev
, EM28XX_DIGITAL_MODE
);
980 switch (dev
->model
) {
981 case EM2874_BOARD_LEADERSHIP_ISDBT
:
982 dvb
->fe
[0] = dvb_attach(s921_attach
,
983 &sharp_isdbt
, &dev
->i2c_adap
[dev
->def_i2c_bus
]);
991 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850
:
992 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950
:
993 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO
:
994 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600
:
995 dvb
->fe
[0] = dvb_attach(lgdt330x_attach
,
996 &em2880_lgdt3303_dev
,
997 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
998 if (em28xx_attach_xc3028(0x61, dev
) < 0) {
1003 case EM2880_BOARD_KWORLD_DVB_310U
:
1004 dvb
->fe
[0] = dvb_attach(zl10353_attach
,
1005 &em28xx_zl10353_with_xc3028
,
1006 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1007 if (em28xx_attach_xc3028(0x61, dev
) < 0) {
1012 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900
:
1013 case EM2882_BOARD_TERRATEC_HYBRID_XS
:
1014 case EM2880_BOARD_EMPIRE_DUAL_TV
:
1015 dvb
->fe
[0] = dvb_attach(zl10353_attach
,
1016 &em28xx_zl10353_xc3028_no_i2c_gate
,
1017 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1018 if (em28xx_attach_xc3028(0x61, dev
) < 0) {
1023 case EM2880_BOARD_TERRATEC_HYBRID_XS
:
1024 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR
:
1025 case EM2881_BOARD_PINNACLE_HYBRID_PRO
:
1026 case EM2882_BOARD_DIKOM_DK300
:
1027 case EM2882_BOARD_KWORLD_VS_DVBT
:
1028 dvb
->fe
[0] = dvb_attach(zl10353_attach
,
1029 &em28xx_zl10353_xc3028_no_i2c_gate
,
1030 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1031 if (dvb
->fe
[0] == NULL
) {
1032 /* This board could have either a zl10353 or a mt352.
1033 If the chip id isn't for zl10353, try mt352 */
1034 dvb
->fe
[0] = dvb_attach(mt352_attach
,
1035 &terratec_xs_mt352_cfg
,
1036 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1039 if (em28xx_attach_xc3028(0x61, dev
) < 0) {
1044 case EM2870_BOARD_KWORLD_355U
:
1045 dvb
->fe
[0] = dvb_attach(zl10353_attach
,
1046 &em28xx_zl10353_no_i2c_gate_dev
,
1047 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1048 if (dvb
->fe
[0] != NULL
)
1049 dvb_attach(qt1010_attach
, dvb
->fe
[0],
1050 &dev
->i2c_adap
[dev
->def_i2c_bus
], &em28xx_qt1010_config
);
1052 case EM2883_BOARD_KWORLD_HYBRID_330U
:
1053 case EM2882_BOARD_EVGA_INDTUBE
:
1054 dvb
->fe
[0] = dvb_attach(s5h1409_attach
,
1055 &em28xx_s5h1409_with_xc3028
,
1056 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1057 if (em28xx_attach_xc3028(0x61, dev
) < 0) {
1062 case EM2882_BOARD_KWORLD_ATSC_315U
:
1063 dvb
->fe
[0] = dvb_attach(lgdt330x_attach
,
1064 &em2880_lgdt3303_dev
,
1065 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1066 if (dvb
->fe
[0] != NULL
) {
1067 if (!dvb_attach(simple_tuner_attach
, dvb
->fe
[0],
1068 &dev
->i2c_adap
[dev
->def_i2c_bus
], 0x61, TUNER_THOMSON_DTT761X
)) {
1074 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2
:
1075 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E
:
1076 dvb
->fe
[0] = dvb_attach(drxd_attach
, &em28xx_drxd
, NULL
,
1077 &dev
->i2c_adap
[dev
->def_i2c_bus
], &dev
->udev
->dev
);
1078 if (em28xx_attach_xc3028(0x61, dev
) < 0) {
1083 case EM2870_BOARD_REDDO_DVB_C_USB_BOX
:
1084 /* Philips CU1216L NIM (Philips TDA10023 + Infineon TUA6034) */
1085 dvb
->fe
[0] = dvb_attach(tda10023_attach
,
1086 &em28xx_tda10023_config
,
1087 &dev
->i2c_adap
[dev
->def_i2c_bus
], 0x48);
1089 if (!dvb_attach(simple_tuner_attach
, dvb
->fe
[0],
1090 &dev
->i2c_adap
[dev
->def_i2c_bus
], 0x60, TUNER_PHILIPS_CU1216L
)) {
1096 case EM2870_BOARD_KWORLD_A340
:
1097 dvb
->fe
[0] = dvb_attach(lgdt3305_attach
,
1098 &em2870_lgdt3304_dev
,
1099 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1100 if (dvb
->fe
[0] != NULL
)
1101 dvb_attach(tda18271_attach
, dvb
->fe
[0], 0x60,
1102 &dev
->i2c_adap
[dev
->def_i2c_bus
], &kworld_a340_config
);
1104 case EM28174_BOARD_PCTV_290E
:
1105 /* set default GPIO0 for LNA, used if GPIOLIB is undefined */
1106 dvb
->lna_gpio
= CXD2820R_GPIO_E
| CXD2820R_GPIO_O
|
1108 dvb
->fe
[0] = dvb_attach(cxd2820r_attach
,
1109 &em28xx_cxd2820r_config
,
1110 &dev
->i2c_adap
[dev
->def_i2c_bus
],
1113 /* FE 0 attach tuner */
1114 if (!dvb_attach(tda18271_attach
,
1117 &dev
->i2c_adap
[dev
->def_i2c_bus
],
1118 &em28xx_cxd2820r_tda18271_config
)) {
1120 dvb_frontend_detach(dvb
->fe
[0]);
1125 #ifdef CONFIG_GPIOLIB
1126 /* enable LNA for DVB-T, DVB-T2 and DVB-C */
1127 result
= gpio_request_one(dvb
->lna_gpio
,
1128 GPIOF_OUT_INIT_LOW
, NULL
);
1130 em28xx_errdev("gpio request failed %d\n",
1133 gpio_free(dvb
->lna_gpio
);
1135 result
= 0; /* continue even set LNA fails */
1137 dvb
->fe
[0]->ops
.set_lna
= em28xx_pctv_290e_set_lna
;
1141 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C
:
1143 struct xc5000_config cfg
;
1144 hauppauge_hvr930c_init(dev
);
1146 dvb
->fe
[0] = dvb_attach(drxk_attach
,
1147 &hauppauge_930c_drxk
, &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1152 /* FIXME: do we need a pll semaphore? */
1153 dvb
->fe
[0]->sec_priv
= dvb
;
1154 sema_init(&dvb
->pll_mutex
, 1);
1155 dvb
->gate_ctrl
= dvb
->fe
[0]->ops
.i2c_gate_ctrl
;
1156 dvb
->fe
[0]->ops
.i2c_gate_ctrl
= drxk_gate_ctrl
;
1159 memset(&cfg
, 0, sizeof(cfg
));
1160 cfg
.i2c_address
= 0x61;
1163 if (dvb
->fe
[0]->ops
.i2c_gate_ctrl
)
1164 dvb
->fe
[0]->ops
.i2c_gate_ctrl(dvb
->fe
[0], 1);
1165 if (!dvb_attach(xc5000_attach
, dvb
->fe
[0], &dev
->i2c_adap
[dev
->def_i2c_bus
],
1170 if (dvb
->fe
[0]->ops
.i2c_gate_ctrl
)
1171 dvb
->fe
[0]->ops
.i2c_gate_ctrl(dvb
->fe
[0], 0);
1175 case EM2884_BOARD_TERRATEC_H5
:
1176 terratec_h5_init(dev
);
1178 dvb
->fe
[0] = dvb_attach(drxk_attach
, &terratec_h5_drxk
, &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1183 /* FIXME: do we need a pll semaphore? */
1184 dvb
->fe
[0]->sec_priv
= dvb
;
1185 sema_init(&dvb
->pll_mutex
, 1);
1186 dvb
->gate_ctrl
= dvb
->fe
[0]->ops
.i2c_gate_ctrl
;
1187 dvb
->fe
[0]->ops
.i2c_gate_ctrl
= drxk_gate_ctrl
;
1189 /* Attach tda18271 to DVB-C frontend */
1190 if (dvb
->fe
[0]->ops
.i2c_gate_ctrl
)
1191 dvb
->fe
[0]->ops
.i2c_gate_ctrl(dvb
->fe
[0], 1);
1192 if (!dvb_attach(tda18271c2dd_attach
, dvb
->fe
[0], &dev
->i2c_adap
[dev
->def_i2c_bus
], 0x60)) {
1196 if (dvb
->fe
[0]->ops
.i2c_gate_ctrl
)
1197 dvb
->fe
[0]->ops
.i2c_gate_ctrl(dvb
->fe
[0], 0);
1200 case EM2884_BOARD_C3TECH_DIGITAL_DUO
:
1201 dvb
->fe
[0] = dvb_attach(mb86a20s_attach
,
1202 &c3tech_duo_mb86a20s_config
,
1203 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1204 if (dvb
->fe
[0] != NULL
)
1205 dvb_attach(tda18271_attach
, dvb
->fe
[0], 0x60,
1206 &dev
->i2c_adap
[dev
->def_i2c_bus
],
1207 &c3tech_duo_tda18271_config
);
1209 case EM28174_BOARD_PCTV_460E
:
1211 dvb
->fe
[0] = dvb_attach(tda10071_attach
,
1212 &em28xx_tda10071_config
, &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1216 dvb_attach(a8293_attach
, dvb
->fe
[0], &dev
->i2c_adap
[dev
->def_i2c_bus
],
1217 &em28xx_a8293_config
);
1219 case EM2874_BOARD_MAXMEDIA_UB425_TC
:
1220 /* attach demodulator */
1221 dvb
->fe
[0] = dvb_attach(drxk_attach
, &maxmedia_ub425_tc_drxk
,
1222 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1225 /* disable I2C-gate */
1226 dvb
->fe
[0]->ops
.i2c_gate_ctrl
= NULL
;
1229 if (!dvb_attach(tda18271c2dd_attach
, dvb
->fe
[0],
1230 &dev
->i2c_adap
[dev
->def_i2c_bus
], 0x60)) {
1231 dvb_frontend_detach(dvb
->fe
[0]);
1237 /* TODO: we need drx-3913k firmware in order to support DVB-T */
1238 em28xx_info("MaxMedia UB425-TC: only DVB-C supported by that " \
1239 "driver version\n");
1242 case EM2884_BOARD_PCTV_510E
:
1243 case EM2884_BOARD_PCTV_520E
:
1244 pctv_520e_init(dev
);
1246 /* attach demodulator */
1247 dvb
->fe
[0] = dvb_attach(drxk_attach
, &pctv_520e_drxk
,
1248 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1252 if (!dvb_attach(tda18271_attach
, dvb
->fe
[0], 0x60,
1253 &dev
->i2c_adap
[dev
->def_i2c_bus
],
1254 &em28xx_cxd2820r_tda18271_config
)) {
1255 dvb_frontend_detach(dvb
->fe
[0]);
1261 case EM2884_BOARD_CINERGY_HTC_STICK
:
1262 terratec_htc_stick_init(dev
);
1264 /* attach demodulator */
1265 dvb
->fe
[0] = dvb_attach(drxk_attach
, &terratec_htc_stick_drxk
,
1266 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1272 /* Attach the demodulator. */
1273 if (!dvb_attach(tda18271_attach
, dvb
->fe
[0], 0x60,
1274 &dev
->i2c_adap
[dev
->def_i2c_bus
],
1275 &em28xx_cxd2820r_tda18271_config
)) {
1280 case EM2884_BOARD_TERRATEC_HTC_USB_XS
:
1281 terratec_htc_usb_xs_init(dev
);
1283 /* attach demodulator */
1284 dvb
->fe
[0] = dvb_attach(drxk_attach
, &terratec_htc_stick_drxk
,
1285 &dev
->i2c_adap
[dev
->def_i2c_bus
]);
1291 /* Attach the demodulator. */
1292 if (!dvb_attach(tda18271_attach
, dvb
->fe
[0], 0x60,
1293 &dev
->i2c_adap
[dev
->def_i2c_bus
],
1294 &em28xx_cxd2820r_tda18271_config
)) {
1300 em28xx_errdev("/2: The frontend of your DVB/ATSC card"
1301 " isn't supported yet\n");
1304 if (NULL
== dvb
->fe
[0]) {
1305 em28xx_errdev("/2: frontend initialization failed\n");
1309 /* define general-purpose callback pointer */
1310 dvb
->fe
[0]->callback
= em28xx_tuner_callback
;
1312 dvb
->fe
[1]->callback
= em28xx_tuner_callback
;
1314 /* register everything */
1315 result
= em28xx_register_dvb(dvb
, THIS_MODULE
, dev
, &dev
->udev
->dev
);
1321 dvb
->adapter
.mfe_shared
= mfe_shared
;
1323 em28xx_info("Successfully loaded em28xx-dvb\n");
1325 em28xx_set_mode(dev
, EM28XX_SUSPEND
);
1326 mutex_unlock(&dev
->lock
);
1335 static inline void prevent_sleep(struct dvb_frontend_ops
*ops
)
1337 ops
->set_voltage
= NULL
;
1339 ops
->tuner_ops
.sleep
= NULL
;
1342 static int em28xx_dvb_fini(struct em28xx
*dev
)
1344 if (!dev
->board
.has_dvb
) {
1345 /* This device does not support the extension */
1350 struct em28xx_dvb
*dvb
= dev
->dvb
;
1352 if (dev
->disconnected
) {
1353 /* We cannot tell the device to sleep
1354 * once it has been unplugged. */
1356 prevent_sleep(&dvb
->fe
[0]->ops
);
1358 prevent_sleep(&dvb
->fe
[1]->ops
);
1361 em28xx_unregister_dvb(dvb
);
1369 static struct em28xx_ops dvb_ops
= {
1371 .name
= "Em28xx dvb Extension",
1372 .init
= em28xx_dvb_init
,
1373 .fini
= em28xx_dvb_fini
,
1376 static int __init
em28xx_dvb_register(void)
1378 return em28xx_register_extension(&dvb_ops
);
1381 static void __exit
em28xx_dvb_unregister(void)
1383 em28xx_unregister_extension(&dvb_ops
);
1386 module_init(em28xx_dvb_register
);
1387 module_exit(em28xx_dvb_unregister
);