drivers/media/video/Kconfig

   1 #
   2 # Generic video config states
   3 #
   4
   5 config VIDEO_V4L2
   6         tristate
   7         depends on VIDEO_DEV && VIDEO_V4L2_COMMON
   8         default VIDEO_DEV && VIDEO_V4L2_COMMON
   9
  10 config VIDEO_V4L1
  11         tristate
  12         depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
  13         default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
  14
  15 config VIDEOBUF_GEN
  16         tristate
  17
  18 config VIDEOBUF_DMA_SG
  19         depends on HAS_DMA
  20         select VIDEOBUF_GEN
  21         tristate
  22
  23 config VIDEOBUF_VMALLOC
  24         select VIDEOBUF_GEN
  25         tristate
  26
  27 config VIDEOBUF_DMA_CONTIG
  28         depends on HAS_DMA
  29         select VIDEOBUF_GEN
  30         tristate
  31
  32 config VIDEOBUF_DVB
  33         tristate
  34         select VIDEOBUF_GEN
  35
  36 config VIDEO_BTCX
  37         depends on PCI
  38         tristate
  39
  40 config VIDEO_TVEEPROM
  41         tristate
  42         depends on I2C
  43
  44 config VIDEO_TUNER
  45         tristate
  46         depends on MEDIA_TUNER
  47
  48 config V4L2_MEM2MEM_DEV
  49         tristate
  50         depends on VIDEOBUF_GEN
  51
  52 #
  53 # Multimedia Video device configuration
  54 #
  55
  56 menuconfig VIDEO_CAPTURE_DRIVERS
  57         bool "Video capture adapters"
  58         depends on VIDEO_V4L2
  59         default y
  60         ---help---
  61           Say Y here to enable selecting the video adapters for
  62           webcams, analog TV, and hybrid analog/digital TV.
  63           Some of those devices also supports FM radio.
  64
  65 if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
  66
  67 config VIDEO_ADV_DEBUG
  68         bool "Enable advanced debug functionality"
  69         default n
  70         ---help---
  71           Say Y here to enable advanced debugging functionality on some
  72           V4L devices.
  73           In doubt, say N.
  74
  75 config VIDEO_FIXED_MINOR_RANGES
  76         bool "Enable old-style fixed minor ranges for video devices"
  77         default n
  78         ---help---
  79           Say Y here to enable the old-style fixed-range minor assignments.
  80           Only useful if you rely on the old behavior and use mknod instead of udev.
  81
  82           When in doubt, say N.
  83
  84 config VIDEO_HELPER_CHIPS_AUTO
  85         bool "Autoselect pertinent encoders/decoders and other helper chips"
  86         default y
  87         ---help---
  88           Most video cards may require additional modules to encode or
  89           decode audio/video standards. This option will autoselect
  90           all pertinent modules to each selected video module.
  91
  92           Unselect this only if you know exactly what you are doing, since
  93           it may break support on some boards.
  94
  95           In doubt, say Y.
  96
  97 config VIDEO_IR_I2C
  98         tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
  99         depends on I2C && VIDEO_IR
 100         default y
 101         ---help---
 102           Most boards have an IR chip directly connected via GPIO. However,
 103           some video boards have the IR connected via I2C bus.
 104
 105           If your board doesn't have an I2C IR chip, you may disable this
 106           option.
 107
 108           In doubt, say Y.
 109
 110 #
 111 # Encoder / Decoder module configuration
 112 #
 113
 114 menu "Encoders/decoders and other helper chips"
 115         depends on !VIDEO_HELPER_CHIPS_AUTO
 116
 117 comment "Audio decoders"
 118
 119 config VIDEO_TVAUDIO
 120         tristate "Simple audio decoder chips"
 121         depends on VIDEO_V4L2 && I2C
 122         ---help---
 123           Support for several audio decoder chips found on some bt8xx boards:
 124           Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
 125                    tea6320, tea6420, tda8425, ta8874z.
 126           Microchip: pic16c54 based design on ProVideo PV951 board.
 127
 128           To compile this driver as a module, choose M here: the
 129           module will be called tvaudio.
 130
 131 config VIDEO_TDA7432
 132         tristate "Philips TDA7432 audio processor"
 133         depends on VIDEO_V4L2 && I2C
 134         ---help---
 135           Support for tda7432 audio decoder chip found on some bt8xx boards.
 136
 137           To compile this driver as a module, choose M here: the
 138           module will be called tda7432.
 139
 140 config VIDEO_TDA9840
 141         tristate "Philips TDA9840 audio processor"
 142         depends on I2C
 143         ---help---
 144           Support for tda9840 audio decoder chip found on some Zoran boards.
 145
 146           To compile this driver as a module, choose M here: the
 147           module will be called tda9840.
 148
 149 config VIDEO_TDA9875
 150         tristate "Philips TDA9875 audio processor"
 151         depends on VIDEO_V4L2 && I2C
 152         ---help---
 153           Support for tda9875 audio decoder chip found on some bt8xx boards.
 154
 155           To compile this driver as a module, choose M here: the
 156           module will be called tda9875.
 157
 158 config VIDEO_TEA6415C
 159         tristate "Philips TEA6415C audio processor"
 160         depends on I2C
 161         ---help---
 162           Support for tea6415c audio decoder chip found on some bt8xx boards.
 163
 164           To compile this driver as a module, choose M here: the
 165           module will be called tea6415c.
 166
 167 config VIDEO_TEA6420
 168         tristate "Philips TEA6420 audio processor"
 169         depends on I2C
 170         ---help---
 171           Support for tea6420 audio decoder chip found on some bt8xx boards.
 172
 173           To compile this driver as a module, choose M here: the
 174           module will be called tea6420.
 175
 176 config VIDEO_MSP3400
 177         tristate "Micronas MSP34xx audio decoders"
 178         depends on VIDEO_V4L2 && I2C
 179         ---help---
 180           Support for the Micronas MSP34xx series of audio decoders.
 181
 182           To compile this driver as a module, choose M here: the
 183           module will be called msp3400.
 184
 185 config VIDEO_CS5345
 186         tristate "Cirrus Logic CS5345 audio ADC"
 187         depends on VIDEO_V4L2 && I2C
 188         ---help---
 189           Support for the Cirrus Logic CS5345 24-bit, 192 kHz
 190           stereo A/D converter.
 191
 192           To compile this driver as a module, choose M here: the
 193           module will be called cs5345.
 194
 195 config VIDEO_CS53L32A
 196         tristate "Cirrus Logic CS53L32A audio ADC"
 197         depends on VIDEO_V4L2 && I2C
 198         ---help---
 199           Support for the Cirrus Logic CS53L32A low voltage
 200           stereo A/D converter.
 201
 202           To compile this driver as a module, choose M here: the
 203           module will be called cs53l32a.
 204
 205 config VIDEO_M52790
 206         tristate "Mitsubishi M52790 A/V switch"
 207         depends on VIDEO_V4L2 && I2C
 208         ---help---
 209          Support for the Mitsubishi M52790 A/V switch.
 210
 211          To compile this driver as a module, choose M here: the
 212          module will be called m52790.
 213
 214 config VIDEO_TLV320AIC23B
 215         tristate "Texas Instruments TLV320AIC23B audio codec"
 216         depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
 217         ---help---
 218           Support for the Texas Instruments TLV320AIC23B audio codec.
 219
 220           To compile this driver as a module, choose M here: the
 221           module will be called tlv320aic23b.
 222
 223 config VIDEO_WM8775
 224         tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
 225         depends on VIDEO_V4L2 && I2C
 226         ---help---
 227           Support for the Wolfson Microelectronics WM8775 high
 228           performance stereo A/D Converter with a 4 channel input mixer.
 229
 230           To compile this driver as a module, choose M here: the
 231           module will be called wm8775.
 232
 233 config VIDEO_WM8739
 234         tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
 235         depends on VIDEO_V4L2 && I2C
 236         ---help---
 237           Support for the Wolfson Microelectronics WM8739
 238           stereo A/D Converter.
 239
 240           To compile this driver as a module, choose M here: the
 241           module will be called wm8739.
 242
 243 config VIDEO_VP27SMPX
 244         tristate "Panasonic VP27s internal MPX"
 245         depends on VIDEO_V4L2 && I2C
 246         ---help---
 247           Support for the internal MPX of the Panasonic VP27s tuner.
 248
 249           To compile this driver as a module, choose M here: the
 250           module will be called vp27smpx.
 251
 252 comment "RDS decoders"
 253
 254 config VIDEO_SAA6588
 255         tristate "SAA6588 Radio Chip RDS decoder support"
 256         depends on VIDEO_V4L2 && I2C
 257
 258         help
 259           Support for this Radio Data System (RDS) decoder. This allows
 260           seeing radio station identification transmitted using this
 261           standard.
 262
 263           To compile this driver as a module, choose M here: the
 264           module will be called saa6588.
 265
 266 comment "Video decoders"
 267
 268 config VIDEO_ADV7180
 269         tristate "Analog Devices ADV7180 decoder"
 270         depends on VIDEO_V4L2 && I2C
 271         ---help---
 272           Support for the Analog Devices ADV7180 video decoder.
 273
 274           To compile this driver as a module, choose M here: the
 275           module will be called adv7180.
 276
 277 config VIDEO_BT819
 278         tristate "BT819A VideoStream decoder"
 279         depends on VIDEO_V4L2 && I2C
 280         ---help---
 281           Support for BT819A video decoder.
 282
 283           To compile this driver as a module, choose M here: the
 284           module will be called bt819.
 285
 286 config VIDEO_BT856
 287         tristate "BT856 VideoStream decoder"
 288         depends on VIDEO_V4L2 && I2C
 289         ---help---
 290           Support for BT856 video decoder.
 291
 292           To compile this driver as a module, choose M here: the
 293           module will be called bt856.
 294
 295 config VIDEO_BT866
 296         tristate "BT866 VideoStream decoder"
 297         depends on VIDEO_V4L2 && I2C
 298         ---help---
 299           Support for BT866 video decoder.
 300
 301           To compile this driver as a module, choose M here: the
 302           module will be called bt866.
 303
 304 config VIDEO_KS0127
 305         tristate "KS0127 video decoder"
 306         depends on VIDEO_V4L2 && I2C
 307         ---help---
 308           Support for KS0127 video decoder.
 309
 310           This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
 311           cards.
 312
 313           To compile this driver as a module, choose M here: the
 314           module will be called ks0127.
 315
 316 config VIDEO_OV7670
 317         tristate "OmniVision OV7670 sensor support"
 318         depends on I2C && VIDEO_V4L2
 319         ---help---
 320           This is a Video4Linux2 sensor-level driver for the OmniVision
 321           OV7670 VGA camera.  It currently only works with the M88ALP01
 322           controller.
 323
 324 config VIDEO_MT9V011
 325         tristate "Micron mt9v011 sensor support"
 326         depends on I2C && VIDEO_V4L2
 327         ---help---
 328           This is a Video4Linux2 sensor-level driver for the Micron
 329           mt0v011 1.3 Mpixel camera.  It currently only works with the
 330           em28xx driver.
 331
 332 config VIDEO_TCM825X
 333         tristate "TCM825x camera sensor support"
 334         depends on I2C && VIDEO_V4L2
 335         ---help---
 336           This is a driver for the Toshiba TCM825x VGA camera sensor.
 337           It is used for example in Nokia N800.
 338
 339 config VIDEO_SAA7110
 340         tristate "Philips SAA7110 video decoder"
 341         depends on VIDEO_V4L2 && I2C
 342         ---help---
 343           Support for the Philips SAA7110 video decoders.
 344
 345           To compile this driver as a module, choose M here: the
 346           module will be called saa7110.
 347
 348 config VIDEO_SAA711X
 349         tristate "Philips SAA7111/3/4/5 video decoders"
 350         depends on VIDEO_V4L2 && I2C
 351         ---help---
 352           Support for the Philips SAA7111/3/4/5 video decoders.
 353
 354           To compile this driver as a module, choose M here: the
 355           module will be called saa7115.
 356
 357 config VIDEO_SAA717X
 358         tristate "Philips SAA7171/3/4 audio/video decoders"
 359         depends on VIDEO_V4L2 && I2C
 360         ---help---
 361           Support for the Philips SAA7171/3/4 audio/video decoders.
 362
 363           To compile this driver as a module, choose M here: the
 364           module will be called saa717x.
 365
 366 config VIDEO_SAA7191
 367         tristate "Philips SAA7191 video decoder"
 368         depends on VIDEO_V4L2 && I2C
 369         ---help---
 370           Support for the Philips SAA7191 video decoder.
 371
 372           To compile this driver as a module, choose M here: the
 373           module will be called saa7191.
 374
 375 config VIDEO_TVP514X
 376         tristate "Texas Instruments TVP514x video decoder"
 377         depends on VIDEO_V4L2 && I2C
 378         ---help---
 379           This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
 380           decoder. It is currently working with the TI OMAP3 camera
 381           controller.
 382
 383           To compile this driver as a module, choose M here: the
 384           module will be called tvp514x.
 385
 386 config VIDEO_TVP5150
 387         tristate "Texas Instruments TVP5150 video decoder"
 388         depends on VIDEO_V4L2 && I2C
 389         ---help---
 390           Support for the Texas Instruments TVP5150 video decoder.
 391
 392           To compile this driver as a module, choose M here: the
 393           module will be called tvp5150.
 394
 395 config VIDEO_TVP7002
 396         tristate "Texas Instruments TVP7002 video decoder"
 397         depends on VIDEO_V4L2 && I2C
 398         ---help---
 399           Support for the Texas Instruments TVP7002 video decoder.
 400
 401           To compile this driver as a module, choose M here: the
 402           module will be called tvp7002.
 403
 404 config VIDEO_VPX3220
 405         tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
 406         depends on VIDEO_V4L2 && I2C
 407         ---help---
 408           Support for VPX322x video decoders.
 409
 410           To compile this driver as a module, choose M here: the
 411           module will be called vpx3220.
 412
 413 comment "Video and audio decoders"
 414
 415 source "drivers/media/video/cx25840/Kconfig"
 416
 417 comment "MPEG video encoders"
 418
 419 config VIDEO_CX2341X
 420         tristate "Conexant CX2341x MPEG encoders"
 421         depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
 422         ---help---
 423           Support for the Conexant CX23416 MPEG encoders
 424           and CX23415 MPEG encoder/decoders.
 425
 426           This module currently supports the encoding functions only.
 427
 428           To compile this driver as a module, choose M here: the
 429           module will be called cx2341x.
 430
 431 comment "Video encoders"
 432
 433 config VIDEO_SAA7127
 434         tristate "Philips SAA7127/9 digital video encoders"
 435         depends on VIDEO_V4L2 && I2C
 436         ---help---
 437           Support for the Philips SAA7127/9 digital video encoders.
 438
 439           To compile this driver as a module, choose M here: the
 440           module will be called saa7127.
 441
 442 config VIDEO_SAA7185
 443         tristate "Philips SAA7185 video encoder"
 444         depends on VIDEO_V4L2 && I2C
 445         ---help---
 446           Support for the Philips SAA7185 video encoder.
 447
 448           To compile this driver as a module, choose M here: the
 449           module will be called saa7185.
 450
 451 config VIDEO_ADV7170
 452         tristate "Analog Devices ADV7170 video encoder"
 453         depends on VIDEO_V4L2 && I2C
 454         ---help---
 455           Support for the Analog Devices ADV7170 video encoder driver
 456
 457           To compile this driver as a module, choose M here: the
 458           module will be called adv7170.
 459
 460 config VIDEO_ADV7175
 461         tristate "Analog Devices ADV7175 video encoder"
 462         depends on VIDEO_V4L2 && I2C
 463         ---help---
 464           Support for the Analog Devices ADV7175 video encoder driver
 465
 466           To compile this driver as a module, choose M here: the
 467           module will be called adv7175.
 468
 469 config VIDEO_THS7303
 470         tristate "THS7303 Video Amplifier"
 471         depends on I2C
 472         help
 473           Support for TI THS7303 video amplifier
 474
 475           To compile this driver as a module, choose M here: the
 476           module will be called ths7303.
 477
 478 config VIDEO_ADV7343
 479         tristate "ADV7343 video encoder"
 480         depends on I2C
 481         help
 482           Support for Analog Devices I2C bus based ADV7343 encoder.
 483
 484           To compile this driver as a module, choose M here: the
 485           module will be called adv7343.
 486
 487 config VIDEO_AK881X
 488         tristate "AK8813/AK8814 video encoders"
 489         depends on I2C
 490         help
 491           Video output driver for AKM AK8813 and AK8814 TV encoders
 492
 493 comment "Video improvement chips"
 494
 495 config VIDEO_UPD64031A
 496         tristate "NEC Electronics uPD64031A Ghost Reduction"
 497         depends on VIDEO_V4L2 && I2C
 498         ---help---
 499           Support for the NEC Electronics uPD64031A Ghost Reduction
 500           video chip. It is most often found in NTSC TV cards made for
 501           Japan and is used to reduce the 'ghosting' effect that can
 502           be present in analog TV broadcasts.
 503
 504           To compile this driver as a module, choose M here: the
 505           module will be called upd64031a.
 506
 507 config VIDEO_UPD64083
 508         tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
 509         depends on VIDEO_V4L2 && I2C
 510         ---help---
 511           Support for the NEC Electronics uPD64083 3-Dimensional Y/C
 512           separation video chip. It is used to improve the quality of
 513           the colors of a composite signal.
 514
 515           To compile this driver as a module, choose M here: the
 516           module will be called upd64083.
 517
 518 endmenu # encoder / decoder chips
 519
 520 config DISPLAY_DAVINCI_DM646X_EVM
 521         tristate "DM646x EVM Video Display"
 522         depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
 523         select VIDEOBUF_DMA_CONTIG
 524         select VIDEO_DAVINCI_VPIF
 525         select VIDEO_ADV7343
 526         select VIDEO_THS7303
 527         help
 528           Support for DM6467 based display device.
 529
 530           To compile this driver as a module, choose M here: the
 531           module will be called vpif_display.
 532
 533 config VIDEO_SH_VOU
 534         tristate "SuperH VOU video output driver"
 535         depends on VIDEO_DEV && ARCH_SHMOBILE
 536         select VIDEOBUF_DMA_CONTIG
 537         help
 538           Support for the Video Output Unit (VOU) on SuperH SoCs.
 539
 540 config CAPTURE_DAVINCI_DM646X_EVM
 541         tristate "DM646x EVM Video Capture"
 542         depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
 543         select VIDEOBUF_DMA_CONTIG
 544         select VIDEO_DAVINCI_VPIF
 545         help
 546           Support for DM6467 based capture device.
 547
 548           To compile this driver as a module, choose M here: the
 549           module will be called vpif_capture.
 550
 551 config VIDEO_DAVINCI_VPIF
 552         tristate "DaVinci VPIF Driver"
 553         depends on DISPLAY_DAVINCI_DM646X_EVM
 554         help
 555           Support for DaVinci VPIF Driver.
 556
 557           To compile this driver as a module, choose M here: the
 558           module will be called vpif.
 559
 560 config VIDEO_VIVI
 561         tristate "Virtual Video Driver"
 562         depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 && FONTS
 563         select FONT_8x16
 564         select VIDEOBUF_VMALLOC
 565         default n
 566         ---help---
 567           Enables a virtual video driver. This device shows a color bar
 568           and a timestamp, as a real device would generate by using V4L2
 569           api.
 570           Say Y here if you want to test video apps or debug V4L devices.
 571           In doubt, say N.
 572
 573 config VIDEO_VPSS_SYSTEM
 574         tristate "VPSS System module driver"
 575         depends on ARCH_DAVINCI
 576         help
 577           Support for vpss system module for video driver
 578
 579 config VIDEO_VPFE_CAPTURE
 580         tristate "VPFE Video Capture Driver"
 581         depends on VIDEO_V4L2 && ARCH_DAVINCI
 582         select VIDEOBUF_DMA_CONTIG
 583         help
 584           Support for DMXXXX VPFE based frame grabber. This is the
 585           common V4L2 module for following DMXXX SoCs from Texas
 586           Instruments:- DM6446 & DM355.
 587
 588           To compile this driver as a module, choose M here: the
 589           module will be called vpfe-capture.
 590
 591 config VIDEO_DM6446_CCDC
 592         tristate "DM6446 CCDC HW module"
 593         depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
 594         select VIDEO_VPSS_SYSTEM
 595         default y
 596         help
 597            Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
 598            with decoder modules such as TVP5146 over BT656 or
 599            sensor module such as MT9T001 over a raw interface. This
 600            module configures the interface and CCDC/ISIF to do
 601            video frame capture from slave decoders.
 602
 603            To compile this driver as a module, choose M here: the
 604            module will be called vpfe.
 605
 606 config VIDEO_DM355_CCDC
 607         tristate "DM355 CCDC HW module"
 608         depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
 609         select VIDEO_VPSS_SYSTEM
 610         default y
 611         help
 612            Enables DM355 CCD hw module. DM355 CCDC hw interfaces
 613            with decoder modules such as TVP5146 over BT656 or
 614            sensor module such as MT9T001 over a raw interface. This
 615            module configures the interface and CCDC/ISIF to do
 616            video frame capture from a slave decoders
 617
 618            To compile this driver as a module, choose M here: the
 619            module will be called vpfe.
 620
 621 config VIDEO_ISIF
 622         tristate "ISIF HW module"
 623         depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
 624         select VIDEO_VPSS_SYSTEM
 625         default y
 626         help
 627            Enables ISIF hw module. This is the hardware module for
 628            configuring ISIF in VPFE to capture Raw Bayer RGB data  from
 629            a image sensor or YUV data from a YUV source.
 630
 631            To compile this driver as a module, choose M here: the
 632            module will be called vpfe.
 633
 634 source "drivers/media/video/omap/Kconfig"
 635
 636 source "drivers/media/video/bt8xx/Kconfig"
 637
 638 config VIDEO_PMS
 639         tristate "Mediavision Pro Movie Studio Video For Linux"
 640         depends on ISA && VIDEO_V4L2
 641         help
 642           Say Y if you have such a thing.
 643
 644           To compile this driver as a module, choose M here: the
 645           module will be called pms.
 646
 647 config VIDEO_BWQCAM
 648         tristate "Quickcam BW Video For Linux"
 649         depends on PARPORT && VIDEO_V4L1
 650         help
 651           Say Y have if you the black and white version of the QuickCam
 652           camera. See the next option for the color version.
 653
 654           To compile this driver as a module, choose M here: the
 655           module will be called bw-qcam.
 656
 657 config VIDEO_CQCAM
 658         tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
 659         depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
 660         help
 661           This is the video4linux driver for the colour version of the
 662           Connectix QuickCam.  If you have one of these cameras, say Y here,
 663           otherwise say N.  This driver does not work with the original
 664           monochrome QuickCam, QuickCam VC or QuickClip.  It is also available
 665           as a module (c-qcam).
 666           Read <file:Documentation/video4linux/CQcam.txt> for more information.
 667
 668 config VIDEO_W9966
 669         tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
 670         depends on PARPORT_1284 && PARPORT && VIDEO_V4L2
 671         help
 672           Video4linux driver for Winbond's w9966 based Webcams.
 673           Currently tested with the LifeView FlyCam Supra.
 674           If you have one of these cameras, say Y here
 675           otherwise say N.
 676           This driver is also available as a module (w9966).
 677
 678           Check out <file:Documentation/video4linux/w9966.txt> for more
 679           information.
 680
 681 config VIDEO_CPIA
 682         tristate "CPiA Video For Linux (DEPRECATED)"
 683         depends on VIDEO_V4L1
 684         default n
 685         ---help---
 686           This driver is DEPRECATED please use the gspca cpia1 module
 687           instead. Note that you need atleast version 0.6.4 of libv4l for
 688           the cpia1 gspca module.
 689
 690           This is the video4linux driver for cameras based on Vision's CPiA
 691           (Colour Processor Interface ASIC), such as the Creative Labs Video
 692           Blaster Webcam II. If you have one of these cameras, say Y here
 693           and select parallel port and/or USB lowlevel support below,
 694           otherwise say N. This will not work with the Creative Webcam III.
 695
 696           Please read <file:Documentation/video4linux/README.cpia> for more
 697           information.
 698
 699           This driver is also available as a module (cpia).
 700
 701 config VIDEO_CPIA_PP
 702         tristate "CPiA Parallel Port Lowlevel Support"
 703         depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
 704         help
 705           This is the lowlevel parallel port support for cameras based on
 706           Vision's CPiA (Colour Processor Interface ASIC), such as the
 707           Creative Webcam II. If you have the parallel port version of one
 708           of these cameras, say Y here, otherwise say N. It is also available
 709           as a module (cpia_pp).
 710
 711 config VIDEO_CPIA_USB
 712         tristate "CPiA USB Lowlevel Support"
 713         depends on VIDEO_CPIA && USB
 714         help
 715           This is the lowlevel USB support for cameras based on Vision's CPiA
 716           (Colour Processor Interface ASIC), such as the Creative Webcam II.
 717           If you have the USB version of one of these cameras, say Y here,
 718           otherwise say N. This will not work with the Creative Webcam III.
 719           It is also available as a module (cpia_usb).
 720
 721 source "drivers/media/video/cpia2/Kconfig"
 722
 723 config VIDEO_SAA5246A
 724         tristate "SAA5246A, SAA5281 Teletext processor"
 725         depends on I2C && VIDEO_V4L2
 726         help
 727           Support for I2C bus based teletext using the SAA5246A or SAA5281
 728           chip. Useful only if you live in Europe.
 729
 730           To compile this driver as a module, choose M here: the
 731           module will be called saa5246a.
 732
 733 config VIDEO_SAA5249
 734         tristate "SAA5249 Teletext processor"
 735         depends on I2C && VIDEO_V4L2
 736         help
 737           Support for I2C bus based teletext using the SAA5249 chip. At the
 738           moment this is only useful on some European WinTV cards.
 739
 740           To compile this driver as a module, choose M here: the
 741           module will be called saa5249.
 742
 743 config VIDEO_VINO
 744         tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
 745         depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
 746         select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
 747         help
 748           Say Y here to build in support for the Vino video input system found
 749           on SGI Indy machines.
 750
 751 config VIDEO_STRADIS
 752         tristate "Stradis 4:2:2 MPEG-2 video driver  (EXPERIMENTAL)"
 753         depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
 754         help
 755           Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
 756           driver for PCI.  There is a product page at
 757           <http://www.stradis.com/>.
 758
 759 source "drivers/media/video/zoran/Kconfig"
 760
 761 config VIDEO_MEYE
 762         tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
 763         depends on PCI && SONY_LAPTOP && VIDEO_V4L2
 764         ---help---
 765           This is the video4linux driver for the Motion Eye camera found
 766           in the Vaio Picturebook laptops. Please read the material in
 767           <file:Documentation/video4linux/meye.txt> for more information.
 768
 769           If you say Y or M here, you need to say Y or M to "Sony Laptop
 770           Extras" in the misc device section.
 771
 772           To compile this driver as a module, choose M here: the
 773           module will be called meye.
 774
 775 source "drivers/media/video/saa7134/Kconfig"
 776
 777 config VIDEO_MXB
 778         tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
 779         depends on PCI && VIDEO_V4L2 && I2C
 780         select VIDEO_SAA7146_VV
 781         select VIDEO_TUNER
 782         select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
 783         select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
 784         select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
 785         select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
 786         ---help---
 787           This is a video4linux driver for the 'Multimedia eXtension Board'
 788           TV card by Siemens-Nixdorf.
 789
 790           To compile this driver as a module, choose M here: the
 791           module will be called mxb.
 792
 793 config VIDEO_HEXIUM_ORION
 794         tristate "Hexium HV-PCI6 and Orion frame grabber"
 795         depends on PCI && VIDEO_V4L2 && I2C
 796         select VIDEO_SAA7146_VV
 797         ---help---
 798           This is a video4linux driver for the Hexium HV-PCI6 and
 799           Orion frame grabber cards by Hexium.
 800
 801           To compile this driver as a module, choose M here: the
 802           module will be called hexium_orion.
 803
 804 config VIDEO_HEXIUM_GEMINI
 805         tristate "Hexium Gemini frame grabber"
 806         depends on PCI && VIDEO_V4L2 && I2C
 807         select VIDEO_SAA7146_VV
 808         ---help---
 809           This is a video4linux driver for the Hexium Gemini frame
 810           grabber card by Hexium. Please note that the Gemini Dual
 811           card is *not* fully supported.
 812
 813           To compile this driver as a module, choose M here: the
 814           module will be called hexium_gemini.
 815
 816 source "drivers/media/video/cx88/Kconfig"
 817
 818 source "drivers/media/video/cx23885/Kconfig"
 819
 820 source "drivers/media/video/au0828/Kconfig"
 821
 822 source "drivers/media/video/ivtv/Kconfig"
 823
 824 source "drivers/media/video/cx18/Kconfig"
 825
 826 source "drivers/media/video/saa7164/Kconfig"
 827
 828 config VIDEO_M32R_AR
 829         tristate "AR devices"
 830         depends on M32R && VIDEO_V4L2
 831         ---help---
 832           This is a video4linux driver for the Renesas AR (Artificial Retina)
 833           camera module.
 834
 835 config VIDEO_M32R_AR_M64278
 836         tristate "AR device with color module M64278(VGA)"
 837         depends on PLAT_M32700UT
 838         select VIDEO_M32R_AR
 839         ---help---
 840           This is a video4linux driver for the Renesas AR (Artificial
 841           Retina) with M64278E-800 camera module.
 842           This module supports VGA(640x480 pixels) resolutions.
 843
 844           To compile this driver as a module, choose M here: the
 845           module will be called arv.
 846
 847 config VIDEO_CAFE_CCIC
 848         tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
 849         depends on PCI && I2C && VIDEO_V4L2
 850         select VIDEO_OV7670
 851         ---help---
 852           This is a video4linux2 driver for the Marvell 88ALP01 integrated
 853           CMOS camera controller.  This is the controller found on first-
 854           generation OLPC systems.
 855
 856 config SOC_CAMERA
 857         tristate "SoC camera support"
 858         depends on VIDEO_V4L2 && HAS_DMA && I2C
 859         select VIDEOBUF_GEN
 860         help
 861           SoC Camera is a common API to several cameras, not connecting
 862           over a bus like PCI or USB. For example some i2c camera connected
 863           directly to the data bus of an SoC.
 864
 865 config SOC_CAMERA_MT9M001
 866         tristate "mt9m001 support"
 867         depends on SOC_CAMERA && I2C
 868         select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
 869         help
 870           This driver supports MT9M001 cameras from Micron, monochrome
 871           and colour models.
 872
 873 config SOC_CAMERA_MT9M111
 874         tristate "mt9m111 and mt9m112 support"
 875         depends on SOC_CAMERA && I2C
 876         help
 877           This driver supports MT9M111 and MT9M112 cameras from Micron
 878
 879 config SOC_CAMERA_MT9T031
 880         tristate "mt9t031 support"
 881         depends on SOC_CAMERA && I2C
 882         help
 883           This driver supports MT9T031 cameras from Micron.
 884
 885 config SOC_CAMERA_MT9T112
 886         tristate "mt9t112 support"
 887         depends on SOC_CAMERA && I2C
 888         help
 889           This driver supports MT9T112 cameras from Aptina.
 890
 891 config SOC_CAMERA_MT9V022
 892         tristate "mt9v022 support"
 893         depends on SOC_CAMERA && I2C
 894         select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
 895         help
 896           This driver supports MT9V022 cameras from Micron
 897
 898 config SOC_CAMERA_RJ54N1
 899         tristate "rj54n1cb0c support"
 900         depends on SOC_CAMERA && I2C
 901         help
 902           This is a rj54n1cb0c video driver
 903
 904 config SOC_CAMERA_TW9910
 905         tristate "tw9910 support"
 906         depends on SOC_CAMERA && I2C
 907         help
 908           This is a tw9910 video driver
 909
 910 config SOC_CAMERA_PLATFORM
 911         tristate "platform camera support"
 912         depends on SOC_CAMERA
 913         help
 914           This is a generic SoC camera platform driver, useful for testing
 915
 916 config SOC_CAMERA_OV772X
 917         tristate "ov772x camera support"
 918         depends on SOC_CAMERA && I2C
 919         help
 920           This is a ov772x camera driver
 921
 922 config SOC_CAMERA_OV9640
 923         tristate "ov9640 camera support"
 924         depends on SOC_CAMERA && I2C
 925         help
 926           This is a ov9640 camera driver
 927
 928 config MX1_VIDEO
 929         bool
 930
 931 config VIDEO_MX1
 932         tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
 933         depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
 934         select FIQ
 935         select VIDEOBUF_DMA_CONTIG
 936         select MX1_VIDEO
 937         ---help---
 938           This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
 939
 940 config MX3_VIDEO
 941         bool
 942
 943 config VIDEO_MX3
 944         tristate "i.MX3x Camera Sensor Interface driver"
 945         depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
 946         select VIDEOBUF_DMA_CONTIG
 947         select MX3_VIDEO
 948         ---help---
 949           This is a v4l2 driver for the i.MX3x Camera Sensor Interface
 950
 951 config VIDEO_PXA27x
 952         tristate "PXA27x Quick Capture Interface driver"
 953         depends on VIDEO_DEV && PXA27x && SOC_CAMERA
 954         select VIDEOBUF_DMA_SG
 955         ---help---
 956           This is a v4l2 driver for the PXA27x Quick Capture Interface
 957
 958 config VIDEO_SH_MOBILE_CEU
 959         tristate "SuperH Mobile CEU Interface driver"
 960         depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
 961         select VIDEOBUF_DMA_CONTIG
 962         ---help---
 963           This is a v4l2 driver for the SuperH Mobile CEU Interface
 964
 965 config VIDEO_OMAP2
 966         tristate "OMAP2 Camera Capture Interface driver"
 967         depends on VIDEO_DEV && ARCH_OMAP2
 968         select VIDEOBUF_DMA_SG
 969         ---help---
 970           This is a v4l2 driver for the TI OMAP2 camera capture interface
 971
 972 #
 973 # USB Multimedia device configuration
 974 #
 975
 976 menuconfig V4L_USB_DRIVERS
 977         bool "V4L USB devices"
 978         depends on USB
 979         default y
 980
 981 if V4L_USB_DRIVERS && USB
 982
 983 source "drivers/media/video/uvc/Kconfig"
 984
 985 source "drivers/media/video/gspca/Kconfig"
 986
 987 source "drivers/media/video/pvrusb2/Kconfig"
 988
 989 source "drivers/media/video/hdpvr/Kconfig"
 990
 991 source "drivers/media/video/em28xx/Kconfig"
 992
 993 source "drivers/media/video/tlg2300/Kconfig"
 994
 995 source "drivers/media/video/cx231xx/Kconfig"
 996
 997 source "drivers/media/video/usbvision/Kconfig"
 998
 999 source "drivers/media/video/usbvideo/Kconfig"
1000
1001 source "drivers/media/video/et61x251/Kconfig"
1002
1003 config VIDEO_OVCAMCHIP
1004         tristate "OmniVision Camera Chip support (DEPRECATED)"
1005         depends on I2C && VIDEO_V4L1
1006         default n
1007         ---help---
1008           This driver is DEPRECATED please use the gspca ov519 module
1009           instead. Note that for the ov511 / ov518 support of the gspca module
1010           you need atleast version 0.6.0 of libv4l and for the w9968cf
1011           atleast version 0.6.3 of libv4l.
1012
1013           Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
1014           This driver is intended to be used with the ov511 and w9968cf USB
1015           camera drivers.
1016
1017           To compile this driver as a module, choose M here: the
1018           module will be called ovcamchip.
1019
1020 config USB_W9968CF
1021         tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)"
1022         depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
1023         default n
1024         ---help---
1025           This driver is DEPRECATED please use the gspca ov519 module
1026           instead. Note that for the w9968cf support of the gspca module
1027           you need atleast version 0.6.3 of libv4l.
1028
1029           Say Y here if you want support for cameras based on OV681 or
1030           Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
1031
1032           This driver has an optional plugin, which is distributed as a
1033           separate module only (released under GPL). It allows to use higher
1034           resolutions and framerates, but cannot be included in the official
1035           Linux kernel for performance purposes.
1036
1037           See <file:Documentation/video4linux/w9968cf.txt> for more info.
1038
1039           To compile this driver as a module, choose M here: the
1040           module will be called w9968cf.
1041
1042 config USB_OV511
1043         tristate "USB OV511 Camera support (DEPRECATED)"
1044         depends on VIDEO_V4L1
1045         default n
1046         ---help---
1047           This driver is DEPRECATED please use the gspca ov519 module
1048           instead. Note that for the ov511 / ov518 support of the gspca module
1049           you need atleast version 0.6.0 of libv4l.
1050
1051           Say Y here if you want to connect this type of camera to your
1052           computer's USB port. See <file:Documentation/video4linux/ov511.txt>
1053           for more information and for a list of supported cameras.
1054
1055           To compile this driver as a module, choose M here: the
1056           module will be called ov511.
1057
1058 config USB_SE401
1059         tristate "USB SE401 Camera support"
1060         depends on VIDEO_V4L1
1061         ---help---
1062           Say Y here if you want to connect this type of camera to your
1063           computer's USB port. See <file:Documentation/video4linux/se401.txt>
1064           for more information and for a list of supported cameras.
1065
1066           To compile this driver as a module, choose M here: the
1067           module will be called se401.
1068
1069 source "drivers/media/video/sn9c102/Kconfig"
1070
1071 config USB_STV680
1072         tristate "USB STV680 (Pencam) Camera support (DEPRECATED)"
1073         depends on VIDEO_V4L1
1074         default n
1075         ---help---
1076           This driver is DEPRECATED please use the gspca stv0680 module
1077           instead. Note that for the gspca stv0680 module you need
1078           atleast version 0.6.3 of libv4l.
1079
1080           Say Y here if you want to connect this type of camera to your
1081           computer's USB port. This includes the Pencam line of cameras.
1082           See <file:Documentation/video4linux/stv680.txt> for more information
1083           and for a list of supported cameras.
1084
1085           To compile this driver as a module, choose M here: the
1086           module will be called stv680.
1087
1088 source "drivers/media/video/zc0301/Kconfig"
1089
1090 source "drivers/media/video/pwc/Kconfig"
1091
1092 config USB_ZR364XX
1093         tristate "USB ZR364XX Camera support"
1094         depends on VIDEO_V4L2
1095         select VIDEOBUF_GEN
1096         select VIDEOBUF_VMALLOC
1097         ---help---
1098           Say Y here if you want to connect this type of camera to your
1099           computer's USB port.
1100           See <file:Documentation/video4linux/zr364xx.txt> for more info
1101           and list of supported cameras.
1102
1103           To compile this driver as a module, choose M here: the
1104           module will be called zr364xx.
1105
1106 config USB_STKWEBCAM
1107         tristate "USB Syntek DC1125 Camera support"
1108         depends on VIDEO_V4L2 && EXPERIMENTAL
1109         ---help---
1110           Say Y here if you want to use this type of camera.
1111           Supported devices are typically found in some Asus laptops,
1112           with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
1113           may be supported by the stk11xx driver, from which this is
1114           derived, see http://stk11xx.sourceforge.net
1115
1116           To compile this driver as a module, choose M here: the
1117           module will be called stkwebcam.
1118
1119 config USB_S2255
1120         tristate "USB Sensoray 2255 video capture device"
1121         depends on VIDEO_V4L2
1122         select VIDEOBUF_VMALLOC
1123         default n
1124         help
1125           Say Y here if you want support for the Sensoray 2255 USB device.
1126           This driver can be compiled as a module, called s2255drv.
1127
1128 endif # V4L_USB_DRIVERS
1129 endif # VIDEO_CAPTURE_DRIVERS
1130
1131 menuconfig V4L_MEM2MEM_DRIVERS
1132         bool "Memory-to-memory multimedia devices"
1133         depends on VIDEO_V4L2
1134         default n
1135         ---help---
1136           Say Y here to enable selecting drivers for V4L devices that
1137           use system memory for both source and destination buffers, as opposed
1138           to capture and output drivers, which use memory buffers for just
1139           one of those.
1140
1141 if V4L_MEM2MEM_DRIVERS
1142
1143 config VIDEO_MEM2MEM_TESTDEV
1144         tristate "Virtual test device for mem2mem framework"
1145         depends on VIDEO_DEV && VIDEO_V4L2
1146         select VIDEOBUF_VMALLOC
1147         select V4L2_MEM2MEM_DEV
1148         default n
1149         ---help---
1150           This is a virtual test device for the memory-to-memory driver
1151           framework.
1152
1153 endif # V4L_MEM2MEM_DRIVERS