drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 if HAS_IOMEM
   6 menu "Multifunction device drivers"
   7
   8 config MFD_CORE
   9         tristate
  10         select IRQ_DOMAIN
  11         default n
  12
  13 config MFD_88PM860X
  14         bool "Support Marvell 88PM8606/88PM8607"
  15         depends on I2C=y && GENERIC_HARDIRQS
  16         select REGMAP_I2C
  17         select MFD_CORE
  18         help
  19           This supports for Marvell 88PM8606/88PM8607 Power Management IC.
  20           This includes the I2C driver and the core APIs _only_, you have to
  21           select individual components like voltage regulators, RTC and
  22           battery-charger under the corresponding menus.
  23
  24 config MFD_88PM800
  25         tristate "Support Marvell 88PM800"
  26         depends on I2C=y && GENERIC_HARDIRQS
  27         select REGMAP_I2C
  28         select REGMAP_IRQ
  29         select MFD_CORE
  30         help
  31           This supports for Marvell 88PM800 Power Management IC.
  32           This includes the I2C driver and the core APIs _only_, you have to
  33           select individual components like voltage regulators, RTC and
  34           battery-charger under the corresponding menus.
  35
  36 config MFD_88PM805
  37         tristate "Support Marvell 88PM805"
  38         depends on I2C=y && GENERIC_HARDIRQS
  39         select REGMAP_I2C
  40         select REGMAP_IRQ
  41         select MFD_CORE
  42         help
  43           This supports for Marvell 88PM805 Power Management IC. This includes
  44           the I2C driver and the core APIs _only_, you have to select individual
  45           components like codec device, headset/Mic device under the
  46           corresponding menus.
  47
  48 config MFD_SM501
  49         tristate "Support for Silicon Motion SM501"
  50          ---help---
  51           This is the core driver for the Silicon Motion SM501 multimedia
  52           companion chip. This device is a multifunction device which may
  53           provide numerous interfaces including USB host controller, USB gadget,
  54           asynchronous serial ports, audio functions, and a dual display video
  55           interface. The device may be connected by PCI or local bus with
  56           varying functions enabled.
  57
  58 config MFD_SM501_GPIO
  59         bool "Export GPIO via GPIO layer"
  60         depends on MFD_SM501 && GPIOLIB
  61          ---help---
  62          This option uses the gpio library layer to export the 64 GPIO
  63          lines on the SM501. The platform data is used to supply the
  64          base number for the first GPIO line to register.
  65
  66 config MFD_ASIC3
  67         bool "Support for Compaq ASIC3"
  68         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  69         select MFD_CORE
  70          ---help---
  71           This driver supports the ASIC3 multifunction chip found on many
  72           PDAs (mainly iPAQ and HTC based ones)
  73
  74 config MFD_DAVINCI_VOICECODEC
  75         tristate
  76         select MFD_CORE
  77
  78 config MFD_DM355EVM_MSP
  79         bool "DaVinci DM355 EVM microcontroller"
  80         depends on I2C=y && MACH_DAVINCI_DM355_EVM
  81         help
  82           This driver supports the MSP430 microcontroller used on these
  83           boards.  MSP430 firmware manages resets and power sequencing,
  84           inputs from buttons and the IR remote, LEDs, an RTC, and more.
  85
  86 config MFD_TI_SSP
  87         tristate "TI Sequencer Serial Port support"
  88         depends on ARCH_DAVINCI_TNETV107X
  89         select MFD_CORE
  90         ---help---
  91           Say Y here if you want support for the Sequencer Serial Port
  92           in a Texas Instruments TNETV107X SoC.
  93
  94           To compile this driver as a module, choose M here: the
  95           module will be called ti-ssp.
  96
  97 config HTC_EGPIO
  98         bool "HTC EGPIO support"
  99         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
 100         help
 101             This driver supports the CPLD egpio chip present on
 102             several HTC phones.  It provides basic support for input
 103             pins, output pins, and irqs.
 104
 105 config HTC_PASIC3
 106         tristate "HTC PASIC3 LED/DS1WM chip support"
 107         select MFD_CORE
 108         help
 109           This core driver provides register access for the LED/DS1WM
 110           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
 111           HTC Magician devices, respectively. Actual functionality is
 112           handled by the leds-pasic3 and ds1wm drivers.
 113
 114 config HTC_I2CPLD
 115         bool "HTC I2C PLD chip support"
 116         depends on I2C=y && GPIOLIB
 117         help
 118           If you say yes here you get support for the supposed CPLD
 119           found on omap850 HTC devices like the HTC Wizard and HTC Herald.
 120           This device provides input and output GPIOs through an I2C
 121           interface to one or more sub-chips.
 122
 123 config UCB1400_CORE
 124         tristate "Philips UCB1400 Core driver"
 125         depends on AC97_BUS
 126         depends on GPIOLIB
 127         help
 128           This enables support for the Philips UCB1400 core functions.
 129           The UCB1400 is an AC97 audio codec.
 130
 131           To compile this driver as a module, choose M here: the
 132           module will be called ucb1400_core.
 133
 134 config MFD_LM3533
 135         tristate "LM3533 Lighting Power chip"
 136         depends on I2C
 137         select MFD_CORE
 138         select REGMAP_I2C
 139         help
 140           Say yes here to enable support for National Semiconductor / TI
 141           LM3533 Lighting Power chips.
 142
 143           This driver provides common support for accessing the device;
 144           additional drivers must be enabled in order to use the LED,
 145           backlight or ambient-light-sensor functionality of the device.
 146
 147 config TPS6105X
 148         tristate "TPS61050/61052 Boost Converters"
 149         depends on I2C
 150         select REGULATOR
 151         select MFD_CORE
 152         select REGULATOR_FIXED_VOLTAGE
 153         help
 154           This option enables a driver for the TP61050/TPS61052
 155           high-power "white LED driver". This boost converter is
 156           sometimes used for other things than white LEDs, and
 157           also contains a GPIO pin.
 158
 159 config TPS65010
 160         tristate "TPS6501x Power Management chips"
 161         depends on I2C && GPIOLIB
 162         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
 163         help
 164           If you say yes here you get support for the TPS6501x series of
 165           Power Management chips.  These include voltage regulators,
 166           lithium ion/polymer battery charging, and other features that
 167           are often used in portable devices like cell phones and cameras.
 168
 169           This driver can also be built as a module.  If so, the module
 170           will be called tps65010.
 171
 172 config TPS6507X
 173         tristate "TPS6507x Power Management / Touch Screen chips"
 174         select MFD_CORE
 175         depends on I2C
 176         help
 177           If you say yes here you get support for the TPS6507x series of
 178           Power Management / Touch Screen chips.  These include voltage
 179           regulators, lithium ion/polymer battery charging, touch screen
 180           and other features that are often used in portable devices.
 181           This driver can also be built as a module.  If so, the module
 182           will be called tps6507x.
 183
 184 config MFD_TPS65217
 185         tristate "TPS65217 Power Management / White LED chips"
 186         depends on I2C
 187         select MFD_CORE
 188         select REGMAP_I2C
 189         help
 190           If you say yes here you get support for the TPS65217 series of
 191           Power Management / White LED chips.
 192           These include voltage regulators, lithium ion/polymer battery
 193           charger, wled and other features that are often used in portable
 194           devices.
 195
 196           This driver can also be built as a module.  If so, the module
 197           will be called tps65217.
 198
 199 config MFD_TPS6586X
 200         bool "TPS6586x Power Management chips"
 201         depends on I2C=y && GENERIC_HARDIRQS
 202         select MFD_CORE
 203         select REGMAP_I2C
 204         help
 205           If you say yes here you get support for the TPS6586X series of
 206           Power Management chips.
 207           This driver provides common support for accessing the device,
 208           additional drivers must be enabled in order to use the
 209           functionality of the device.
 210
 211           This driver can also be built as a module.  If so, the module
 212           will be called tps6586x.
 213
 214 config MFD_TPS65910
 215         bool "TPS65910 Power Management chip"
 216         depends on I2C=y && GPIOLIB
 217         select MFD_CORE
 218         select REGMAP_I2C
 219         select IRQ_DOMAIN
 220         help
 221           if you say yes here you get support for the TPS65910 series of
 222           Power Management chips.
 223
 224 config MFD_TPS65912
 225         bool
 226         depends on GPIOLIB
 227
 228 config MFD_TPS65912_I2C
 229         bool "TPS65912 Power Management chip with I2C"
 230         select MFD_CORE
 231         select MFD_TPS65912
 232         depends on I2C=y && GPIOLIB
 233         help
 234           If you say yes here you get support for the TPS65912 series of
 235           PM chips with I2C interface.
 236
 237 config MFD_TPS65912_SPI
 238         bool "TPS65912 Power Management chip with SPI"
 239         select MFD_CORE
 240         select MFD_TPS65912
 241         depends on SPI_MASTER && GPIOLIB
 242         help
 243           If you say yes here you get support for the TPS65912 series of
 244           PM chips with SPI interface.
 245
 246 config MENELAUS
 247         bool "Texas Instruments TWL92330/Menelaus PM chip"
 248         depends on I2C=y && ARCH_OMAP2
 249         help
 250           If you say yes here you get support for the Texas Instruments
 251           TWL92330/Menelaus Power Management chip. This include voltage
 252           regulators, Dual slot memory card transceivers, real-time clock
 253           and other features that are often used in portable devices like
 254           cell phones and PDAs.
 255
 256 config TWL4030_CORE
 257         bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
 258         depends on I2C=y && GENERIC_HARDIRQS
 259         select IRQ_DOMAIN
 260         help
 261           Say yes here if you have TWL4030 / TWL6030 family chip on your board.
 262           This core driver provides register access and IRQ handling
 263           facilities, and registers devices for the various functions
 264           so that function-specific drivers can bind to them.
 265
 266           These multi-function chips are found on many OMAP2 and OMAP3
 267           boards, providing power management, RTC, GPIO, keypad, a
 268           high speed USB OTG transceiver, an audio codec (on most
 269           versions) and many other features.
 270
 271 config TWL4030_MADC
 272         tristate "Texas Instruments TWL4030 MADC"
 273         depends on TWL4030_CORE
 274         help
 275         This driver provides support for triton TWL4030-MADC. The
 276         driver supports both RT and SW conversion methods.
 277
 278         This driver can be built as a module. If so it will be
 279         named twl4030-madc
 280
 281 config TWL4030_POWER
 282         bool "Support power resources on TWL4030 family chips"
 283         depends on TWL4030_CORE && ARM
 284         help
 285           Say yes here if you want to use the power resources on the
 286           TWL4030 family chips.  Most of these resources are regulators,
 287           which have a separate driver; some are control signals, such
 288           as clock request handshaking.
 289
 290           This driver uses board-specific data to initialize the resources
 291           and load scripts controlling which resources are switched off/on
 292           or reset when a sleep, wakeup or warm reset event occurs.
 293
 294 config MFD_TWL4030_AUDIO
 295         bool
 296         depends on TWL4030_CORE
 297         select MFD_CORE
 298         default n
 299
 300 config TWL6040_CORE
 301         bool "Support for TWL6040 audio codec"
 302         depends on I2C=y && GENERIC_HARDIRQS
 303         select MFD_CORE
 304         select REGMAP_I2C
 305         select IRQ_DOMAIN
 306         default n
 307         help
 308           Say yes here if you want support for Texas Instruments TWL6040 audio
 309           codec.
 310           This driver provides common support for accessing the device,
 311           additional drivers must be enabled in order to use the
 312           functionality of the device (audio, vibra).
 313
 314 config MFD_STMPE
 315         bool "Support STMicroelectronics STMPE"
 316         depends on (I2C=y || SPI_MASTER=y) && GENERIC_HARDIRQS
 317         select MFD_CORE
 318         help
 319           Support for the STMPE family of I/O Expanders from
 320           STMicroelectronics.
 321
 322           Currently supported devices are:
 323
 324                 STMPE811: GPIO, Touchscreen
 325                 STMPE1601: GPIO, Keypad
 326                 STMPE2401: GPIO, Keypad
 327                 STMPE2403: GPIO, Keypad
 328
 329           This driver provides common support for accessing the device,
 330           additional drivers must be enabled in order to use the functionality
 331           of the device.  Currently available sub drivers are:
 332
 333                 GPIO: stmpe-gpio
 334                 Keypad: stmpe-keypad
 335                 Touchscreen: stmpe-ts
 336
 337 menu "STMPE Interface Drivers"
 338 depends on MFD_STMPE
 339
 340 config STMPE_I2C
 341         bool "STMPE I2C Inteface"
 342         depends on I2C=y
 343         default y
 344         help
 345           This is used to enable I2C interface of STMPE
 346
 347 config STMPE_SPI
 348         bool "STMPE SPI Inteface"
 349         depends on SPI_MASTER
 350         help
 351           This is used to enable SPI interface of STMPE
 352 endmenu
 353
 354 config MFD_TC3589X
 355         bool "Support Toshiba TC35892 and variants"
 356         depends on I2C=y && GENERIC_HARDIRQS
 357         select MFD_CORE
 358         help
 359           Support for the Toshiba TC35892 and variants I/O Expander.
 360
 361           This driver provides common support for accessing the device,
 362           additional drivers must be enabled in order to use the
 363           functionality of the device.
 364
 365 config MFD_TMIO
 366         bool
 367         default n
 368
 369 config MFD_T7L66XB
 370         bool "Support Toshiba T7L66XB"
 371         depends on ARM && HAVE_CLK
 372         select MFD_CORE
 373         select MFD_TMIO
 374         help
 375           Support for Toshiba Mobile IO Controller T7L66XB
 376
 377 config MFD_SMSC
 378        bool "Support for the SMSC ECE1099 series chips"
 379        depends on I2C=y
 380        select MFD_CORE
 381        select REGMAP_I2C
 382        help
 383         If you say yes here you get support for the
 384         ece1099 chips from SMSC.
 385
 386         To compile this driver as a module, choose M here: the
 387         module will be called smsc.
 388
 389 config MFD_TC6387XB
 390         bool "Support Toshiba TC6387XB"
 391         depends on ARM && HAVE_CLK
 392         select MFD_CORE
 393         select MFD_TMIO
 394         help
 395           Support for Toshiba Mobile IO Controller TC6387XB
 396
 397 config MFD_TC6393XB
 398         bool "Support Toshiba TC6393XB"
 399         depends on ARM && HAVE_CLK
 400         select GPIOLIB
 401         select MFD_CORE
 402         select MFD_TMIO
 403         help
 404           Support for Toshiba Mobile IO Controller TC6393XB
 405
 406 config PMIC_DA903X
 407         bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 408         depends on I2C=y
 409         help
 410           Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
 411           ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 412           usually found on PXA processors-based platforms. This includes
 413           the I2C driver and the core APIs _only_, you have to select
 414           individual components like LCD backlight, voltage regulators,
 415           LEDs and battery-charger under the corresponding menus.
 416
 417 config PMIC_DA9052
 418         bool
 419         select MFD_CORE
 420
 421 config MFD_DA9052_SPI
 422         bool "Support Dialog Semiconductor DA9052/53 PMIC variants with SPI"
 423         select REGMAP_SPI
 424         select REGMAP_IRQ
 425         select PMIC_DA9052
 426         depends on SPI_MASTER=y
 427         help
 428           Support for the Dialog Semiconductor DA9052 PMIC
 429           when controlled using SPI. This driver provides common support
 430           for accessing the device, additional drivers must be enabled in
 431           order to use the functionality of the device.
 432
 433 config MFD_DA9052_I2C
 434         bool "Support Dialog Semiconductor DA9052/53 PMIC variants with I2C"
 435         select REGMAP_I2C
 436         select REGMAP_IRQ
 437         select PMIC_DA9052
 438         depends on I2C=y
 439         help
 440           Support for the Dialog Semiconductor DA9052 PMIC
 441           when controlled using I2C. This driver provides common support
 442           for accessing the device, additional drivers must be enabled in
 443           order to use the functionality of the device.
 444
 445 config MFD_DA9055
 446         bool "Dialog Semiconductor DA9055 PMIC Support"
 447         select REGMAP_I2C
 448         select REGMAP_IRQ
 449         select PMIC_DA9055
 450         select MFD_CORE
 451         depends on I2C=y
 452         help
 453           Say yes here for support of Dialog Semiconductor DA9055. This is
 454           a Power Management IC. This driver provides common support for
 455           accessing the device as well as the I2C interface to the chip itself.
 456           Additional drivers must be enabled in order to use the functionality
 457           of the device.
 458
 459           This driver can be built as a module. If built as a module it will be
 460           called "da9055"
 461
 462 config PMIC_ADP5520
 463         bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
 464         depends on I2C=y
 465         help
 466           Say yes here to add support for Analog Devices AD5520 and ADP5501,
 467           Multifunction Power Management IC. This includes
 468           the I2C driver and the core APIs _only_, you have to select
 469           individual components like LCD backlight, LEDs, GPIOs and Kepad
 470           under the corresponding menus.
 471
 472 config MFD_LP8788
 473         bool "Texas Instruments LP8788 Power Management Unit Driver"
 474         depends on I2C=y
 475         select MFD_CORE
 476         select REGMAP_I2C
 477         select IRQ_DOMAIN
 478         help
 479           TI LP8788 PMU supports regulators, battery charger, RTC,
 480           ADC, backlight driver and current sinks.
 481
 482 config MFD_MAX77686
 483         bool "Maxim Semiconductor MAX77686 PMIC Support"
 484         depends on I2C=y && GENERIC_HARDIRQS
 485         select MFD_CORE
 486         select REGMAP_I2C
 487         select IRQ_DOMAIN
 488         help
 489           Say yes here to support for Maxim Semiconductor MAX77686.
 490           This is a Power Management IC with RTC on chip.
 491           This driver provides common support for accessing the device;
 492           additional drivers must be enabled in order to use the functionality
 493           of the device.
 494
 495 config MFD_MAX77693
 496         bool "Maxim Semiconductor MAX77693 PMIC Support"
 497         depends on I2C=y && GENERIC_HARDIRQS
 498         select MFD_CORE
 499         select REGMAP_I2C
 500         help
 501           Say yes here to support for Maxim Semiconductor MAX77693.
 502           This is a companion Power Management IC with Flash, Haptic, Charger,
 503           and MUIC(Micro USB Interface Controller) controls on chip.
 504           This driver provides common support for accessing the device;
 505           additional drivers must be enabled in order to use the functionality
 506           of the device.
 507
 508 config MFD_MAX8907
 509         tristate "Maxim Semiconductor MAX8907 PMIC Support"
 510         select MFD_CORE
 511         depends on I2C=y && GENERIC_HARDIRQS
 512         select REGMAP_I2C
 513         select REGMAP_IRQ
 514         help
 515           Say yes here to support for Maxim Semiconductor MAX8907. This is
 516           a Power Management IC. This driver provides common support for
 517           accessing the device; additional drivers must be enabled in order
 518           to use the functionality of the device.
 519
 520 config MFD_MAX8925
 521         bool "Maxim Semiconductor MAX8925 PMIC Support"
 522         depends on I2C=y && GENERIC_HARDIRQS
 523         select MFD_CORE
 524         help
 525           Say yes here to support for Maxim Semiconductor MAX8925. This is
 526           a Power Management IC. This driver provides common support for
 527           accessing the device, additional drivers must be enabled in order
 528           to use the functionality of the device.
 529
 530 config MFD_MAX8997
 531         bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
 532         depends on I2C=y && GENERIC_HARDIRQS
 533         select MFD_CORE
 534         select IRQ_DOMAIN
 535         help
 536           Say yes here to support for Maxim Semiconductor MAX8997/8966.
 537           This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
 538           MUIC controls on chip.
 539           This driver provides common support for accessing the device;
 540           additional drivers must be enabled in order to use the functionality
 541           of the device.
 542
 543 config MFD_MAX8998
 544         bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
 545         depends on I2C=y && GENERIC_HARDIRQS
 546         select MFD_CORE
 547         help
 548           Say yes here to support for Maxim Semiconductor MAX8998 and
 549           National Semiconductor LP3974. This is a Power Management IC.
 550           This driver provides common support for accessing the device,
 551           additional drivers must be enabled in order to use the functionality
 552           of the device.
 553
 554 config MFD_SEC_CORE
 555         bool "SAMSUNG Electronics PMIC Series Support"
 556         depends on I2C=y && GENERIC_HARDIRQS
 557         select MFD_CORE
 558         select REGMAP_I2C
 559         select REGMAP_IRQ
 560         help
 561          Support for the Samsung Electronics MFD series.
 562          This driver provides common support for accessing the device,
 563          additional drivers must be enabled in order to use the functionality
 564          of the device
 565
 566 config MFD_ARIZONA
 567         select REGMAP
 568         select REGMAP_IRQ
 569         select MFD_CORE
 570         bool
 571
 572 config MFD_ARIZONA_I2C
 573         tristate "Support Wolfson Microelectronics Arizona platform with I2C"
 574         select MFD_ARIZONA
 575         select MFD_CORE
 576         select REGMAP_I2C
 577         depends on I2C
 578         help
 579           Support for the Wolfson Microelectronics Arizona platform audio SoC
 580           core functionality controlled via I2C.
 581
 582 config MFD_ARIZONA_SPI
 583         tristate "Support Wolfson Microelectronics Arizona platform with SPI"
 584         select MFD_ARIZONA
 585         select MFD_CORE
 586         select REGMAP_SPI
 587         depends on SPI_MASTER
 588         help
 589           Support for the Wolfson Microelectronics Arizona platform audio SoC
 590           core functionality controlled via I2C.
 591
 592 config MFD_WM5102
 593         bool "Support Wolfson Microelectronics WM5102"
 594         depends on MFD_ARIZONA
 595         help
 596           Support for Wolfson Microelectronics WM5102 low power audio SoC
 597
 598 config MFD_WM5110
 599         bool "Support Wolfson Microelectronics WM5110"
 600         depends on MFD_ARIZONA
 601         help
 602           Support for Wolfson Microelectronics WM5110 low power audio SoC
 603
 604 config MFD_WM8400
 605         bool "Support Wolfson Microelectronics WM8400"
 606         select MFD_CORE
 607         depends on I2C=y
 608         select REGMAP_I2C
 609         help
 610           Support for the Wolfson Microelecronics WM8400 PMIC and audio
 611           CODEC.  This driver provides common support for accessing
 612           the device, additional drivers must be enabled in order to use
 613           the functionality of the device.
 614
 615 config MFD_WM831X
 616         bool
 617         depends on GENERIC_HARDIRQS
 618
 619 config MFD_WM831X_I2C
 620         bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
 621         select MFD_CORE
 622         select MFD_WM831X
 623         select REGMAP_I2C
 624         select IRQ_DOMAIN
 625         depends on I2C=y && GENERIC_HARDIRQS
 626         help
 627           Support for the Wolfson Microelecronics WM831x and WM832x PMICs
 628           when controlled using I2C.  This driver provides common support
 629           for accessing the device, additional drivers must be enabled in
 630           order to use the functionality of the device.
 631
 632 config MFD_WM831X_SPI
 633         bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
 634         select MFD_CORE
 635         select MFD_WM831X
 636         select REGMAP_SPI
 637         select IRQ_DOMAIN
 638         depends on SPI_MASTER && GENERIC_HARDIRQS
 639         help
 640           Support for the Wolfson Microelecronics WM831x and WM832x PMICs
 641           when controlled using SPI.  This driver provides common support
 642           for accessing the device, additional drivers must be enabled in
 643           order to use the functionality of the device.
 644
 645 config MFD_WM8350
 646         bool
 647         depends on GENERIC_HARDIRQS
 648
 649 config MFD_WM8350_CONFIG_MODE_0
 650         bool
 651         depends on MFD_WM8350
 652
 653 config MFD_WM8350_CONFIG_MODE_1
 654         bool
 655         depends on MFD_WM8350
 656
 657 config MFD_WM8350_CONFIG_MODE_2
 658         bool
 659         depends on MFD_WM8350
 660
 661 config MFD_WM8350_CONFIG_MODE_3
 662         bool
 663         depends on MFD_WM8350
 664
 665 config MFD_WM8351_CONFIG_MODE_0
 666         bool
 667         depends on MFD_WM8350
 668
 669 config MFD_WM8351_CONFIG_MODE_1
 670         bool
 671         depends on MFD_WM8350
 672
 673 config MFD_WM8351_CONFIG_MODE_2
 674         bool
 675         depends on MFD_WM8350
 676
 677 config MFD_WM8351_CONFIG_MODE_3
 678         bool
 679         depends on MFD_WM8350
 680
 681 config MFD_WM8352_CONFIG_MODE_0
 682         bool
 683         depends on MFD_WM8350
 684
 685 config MFD_WM8352_CONFIG_MODE_1
 686         bool
 687         depends on MFD_WM8350
 688
 689 config MFD_WM8352_CONFIG_MODE_2
 690         bool
 691         depends on MFD_WM8350
 692
 693 config MFD_WM8352_CONFIG_MODE_3
 694         bool
 695         depends on MFD_WM8350
 696
 697 config MFD_WM8350_I2C
 698         bool "Support Wolfson Microelectronics WM8350 with I2C"
 699         select MFD_WM8350
 700         depends on I2C=y && GENERIC_HARDIRQS
 701         help
 702           The WM8350 is an integrated audio and power management
 703           subsystem with watchdog and RTC functionality for embedded
 704           systems.  This option enables core support for the WM8350 with
 705           I2C as the control interface.  Additional options must be
 706           selected to enable support for the functionality of the chip.
 707
 708 config MFD_WM8994
 709         bool "Support Wolfson Microelectronics WM8994"
 710         select MFD_CORE
 711         select REGMAP_I2C
 712         select REGMAP_IRQ
 713         depends on I2C=y && GENERIC_HARDIRQS
 714         help
 715           The WM8994 is a highly integrated hi-fi CODEC designed for
 716           smartphone applicatiosn.  As well as audio functionality it
 717           has on board GPIO and regulator functionality which is
 718           supported via the relevant subsystems.  This driver provides
 719           core support for the WM8994, in order to use the actual
 720           functionaltiy of the device other drivers must be enabled.
 721
 722 config MFD_PCF50633
 723         tristate "Support for NXP PCF50633"
 724         depends on I2C
 725         select REGMAP_I2C
 726         help
 727           Say yes here if you have NXP PCF50633 chip on your board.
 728           This core driver provides register access and IRQ handling
 729           facilities, and registers devices for the various functions
 730           so that function-specific drivers can bind to them.
 731
 732 config PCF50633_ADC
 733         tristate "Support for NXP PCF50633 ADC"
 734         depends on MFD_PCF50633
 735         help
 736          Say yes here if you want to include support for ADC in the
 737          NXP PCF50633 chip.
 738
 739 config PCF50633_GPIO
 740         tristate "Support for NXP PCF50633 GPIO"
 741         depends on MFD_PCF50633
 742         help
 743          Say yes here if you want to include support GPIO for pins on
 744          the PCF50633 chip.
 745
 746 config MFD_MC13783
 747         tristate
 748
 749 config MFD_MC13XXX
 750         tristate
 751         depends on SPI_MASTER || I2C
 752         select MFD_CORE
 753         select MFD_MC13783
 754         help
 755           Enable support for the Freescale MC13783 and MC13892 PMICs.
 756           This driver provides common support for accessing the device,
 757           additional drivers must be enabled in order to use the
 758           functionality of the device.
 759
 760 config MFD_MC13XXX_SPI
 761         tristate "Freescale MC13783 and MC13892 SPI interface"
 762         depends on SPI_MASTER
 763         select REGMAP_SPI
 764         select MFD_MC13XXX
 765         help
 766           Select this if your MC13xxx is connected via an SPI bus.
 767
 768 config MFD_MC13XXX_I2C
 769         tristate "Freescale MC13892 I2C interface"
 770         depends on I2C
 771         select REGMAP_I2C
 772         select MFD_MC13XXX
 773         help
 774           Select this if your MC13xxx is connected via an I2C bus.
 775
 776 config ABX500_CORE
 777         bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
 778         default y if ARCH_U300 || ARCH_U8500
 779         help
 780           Say yes here if you have the ABX500 Mixed Signal IC family
 781           chips. This core driver expose register access functions.
 782           Functionality specific drivers using these functions can
 783           remain unchanged when IC changes. Binding of the functions to
 784           actual register access is done by the IC core driver.
 785
 786 config AB3100_CORE
 787         bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 788         depends on I2C=y && ABX500_CORE
 789         select MFD_CORE
 790         default y if ARCH_U300
 791         help
 792           Select this to enable the AB3100 Mixed Signal IC core
 793           functionality. This connects to a AB3100 on the I2C bus
 794           and expose a number of symbols needed for dependent devices
 795           to read and write registers and subscribe to events from
 796           this multi-functional IC. This is needed to use other features
 797           of the AB3100 such as battery-backed RTC, charging control,
 798           LEDs, vibrator, system power and temperature, power management
 799           and ALSA sound.
 800
 801 config AB3100_OTP
 802         tristate "ST-Ericsson AB3100 OTP functions"
 803         depends on AB3100_CORE
 804         default y if AB3100_CORE
 805         help
 806           Select this to enable the AB3100 Mixed Signal IC OTP (one-time
 807           programmable memory) support. This exposes a sysfs file to read
 808           out OTP values.
 809
 810 config EZX_PCAP
 811         bool "PCAP Support"
 812         depends on GENERIC_HARDIRQS && SPI_MASTER
 813         help
 814           This enables the PCAP ASIC present on EZX Phones. This is
 815           needed for MMC, TouchScreen, Sound, USB, etc..
 816
 817 config AB8500_CORE
 818         bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
 819         depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
 820         select MFD_CORE
 821         select IRQ_DOMAIN
 822         help
 823           Select this option to enable access to AB8500 power management
 824           chip. This connects to U8500 either on the SSP/SPI bus (deprecated
 825           since hardware version v1.0) or the I2C bus via PRCMU. It also adds
 826           the irq_chip parts for handling the Mixed Signal chip events.
 827           This chip embeds various other multimedia funtionalities as well.
 828
 829 config AB8500_DEBUG
 830        bool "Enable debug info via debugfs"
 831        depends on AB8500_CORE && DEBUG_FS
 832        default y if DEBUG_FS
 833        help
 834          Select this option if you want debug information using the debug
 835          filesystem, debugfs.
 836
 837 config AB8500_GPADC
 838         bool "AB8500 GPADC driver"
 839         depends on AB8500_CORE && REGULATOR_AB8500
 840         default y
 841         help
 842           AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
 843
 844 config MFD_DB8500_PRCMU
 845         bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
 846         depends on UX500_SOC_DB8500
 847         select MFD_CORE
 848         help
 849           Select this option to enable support for the DB8500 Power Reset
 850           and Control Management Unit. This is basically an autonomous
 851           system controller running an XP70 microprocessor, which is accessed
 852           through a register map.
 853
 854 config MFD_CS5535
 855         tristate "Support for CS5535 and CS5536 southbridge core functions"
 856         select MFD_CORE
 857         depends on PCI && X86
 858         ---help---
 859           This is the core driver for CS5535/CS5536 MFD functions.  This is
 860           necessary for using the board's GPIO and MFGPT functionality.
 861
 862 config MFD_TIMBERDALE
 863         tristate "Support for the Timberdale FPGA"
 864         select MFD_CORE
 865         depends on PCI && GPIOLIB
 866         ---help---
 867         This is the core driver for the timberdale FPGA. This device is a
 868         multifunction device which exposes numerous platform devices.
 869
 870         The timberdale FPGA can be found on the Intel Atom development board
 871         for in-vehicle infontainment, called Russellville.
 872
 873 config LPC_SCH
 874         tristate "Intel SCH LPC"
 875         depends on PCI
 876         select MFD_CORE
 877         help
 878           LPC bridge function of the Intel SCH provides support for
 879           System Management Bus and General Purpose I/O.
 880
 881 config LPC_ICH
 882         tristate "Intel ICH LPC"
 883         depends on PCI
 884         select MFD_CORE
 885         help
 886           The LPC bridge function of the Intel ICH provides support for
 887           many functional units. This driver provides needed support for
 888           other drivers to control these functions, currently GPIO and
 889           watchdog.
 890
 891 config MFD_RDC321X
 892         tristate "Support for RDC-R321x southbridge"
 893         select MFD_CORE
 894         depends on PCI
 895         help
 896           Say yes here if you want to have support for the RDC R-321x SoC
 897           southbridge which provides access to GPIOs and Watchdog using the
 898           southbridge PCI device configuration space.
 899
 900 config MFD_JANZ_CMODIO
 901         tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
 902         select MFD_CORE
 903         depends on PCI
 904         help
 905           This is the core driver for the Janz CMOD-IO PCI MODULbus
 906           carrier board. This device is a PCI to MODULbus bridge which may
 907           host many different types of MODULbus daughterboards, including
 908           CAN and GPIO controllers.
 909
 910 config MFD_JZ4740_ADC
 911         bool "Support for the JZ4740 SoC ADC core"
 912         select MFD_CORE
 913         select GENERIC_IRQ_CHIP
 914         depends on MACH_JZ4740
 915         help
 916           Say yes here if you want support for the ADC unit in the JZ4740 SoC.
 917           This driver is necessary for jz4740-battery and jz4740-hwmon driver.
 918
 919 config MFD_VX855
 920         tristate "Support for VIA VX855/VX875 integrated south bridge"
 921         depends on PCI
 922         select MFD_CORE
 923         help
 924           Say yes here to enable support for various functions of the
 925           VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
 926           and/or vx855_gpio drivers for this to do anything useful.
 927
 928 config MFD_WL1273_CORE
 929         tristate "Support for TI WL1273 FM radio."
 930         depends on I2C
 931         select MFD_CORE
 932         default n
 933         help
 934           This is the core driver for the TI WL1273 FM radio. This MFD
 935           driver connects the radio-wl1273 V4L2 module and the wl1273
 936           audio codec.
 937
 938 config MFD_OMAP_USB_HOST
 939         bool "Support OMAP USBHS core and TLL driver"
 940         depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
 941         default y
 942         help
 943           This is the core driver for the OAMP EHCI and OHCI drivers.
 944           This MFD driver does the required setup functionalities for
 945           OMAP USB Host drivers.
 946
 947 config MFD_PM8XXX
 948         tristate
 949
 950 config MFD_PM8921_CORE
 951         tristate "Qualcomm PM8921 PMIC chip"
 952         depends on MSM_SSBI
 953         select MFD_CORE
 954         select MFD_PM8XXX
 955         help
 956           If you say yes to this option, support will be included for the
 957           built-in PM8921 PMIC chip.
 958
 959           This is required if your board has a PM8921 and uses its features,
 960           such as: MPPs, GPIOs, regulators, interrupts, and PWM.
 961
 962           Say M here if you want to include support for PM8921 chip as a module.
 963           This will build a module called "pm8921-core".
 964
 965 config MFD_PM8XXX_IRQ
 966         bool "Support for Qualcomm PM8xxx IRQ features"
 967         depends on MFD_PM8XXX
 968         default y if MFD_PM8XXX
 969         help
 970           This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
 971
 972           This is required to use certain other PM 8xxx features, such as GPIO
 973           and MPP.
 974
 975 config TPS65911_COMPARATOR
 976         tristate
 977
 978 config MFD_TPS65090
 979         bool "TPS65090 Power Management chips"
 980         depends on I2C=y && GENERIC_HARDIRQS
 981         select MFD_CORE
 982         select REGMAP_I2C
 983         help
 984           If you say yes here you get support for the TPS65090 series of
 985           Power Management chips.
 986           This driver provides common support for accessing the device,
 987           additional drivers must be enabled in order to use the
 988           functionality of the device.
 989
 990 config MFD_AAT2870_CORE
 991         bool "Support for the AnalogicTech AAT2870"
 992         select MFD_CORE
 993         depends on I2C=y && GPIOLIB
 994         help
 995           If you say yes here you get support for the AAT2870.
 996           This driver provides common support for accessing the device,
 997           additional drivers must be enabled in order to use the
 998           functionality of the device.
 999
1000 config MFD_INTEL_MSIC
1001         bool "Support for Intel MSIC"
1002         depends on INTEL_SCU_IPC
1003         select MFD_CORE
1004         help
1005           Select this option to enable access to Intel MSIC (Avatele
1006           Passage) chip. This chip embeds audio, battery, GPIO, etc.
1007           devices used in Intel Medfield platforms.
1008
1009 config MFD_RC5T583
1010         bool "Ricoh RC5T583 Power Management system device"
1011         depends on I2C=y && GENERIC_HARDIRQS
1012         select MFD_CORE
1013         select REGMAP_I2C
1014         help
1015           Select this option to get support for the RICOH583 Power
1016           Management system device.
1017           This driver provides common support for accessing the device
1018           through i2c interface. The device supports multiple sub-devices
1019           like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
1020           Additional drivers must be enabled in order to use the
1021           different functionality of the device.
1022
1023 config MFD_STA2X11
1024         bool "STA2X11 multi function device support"
1025         depends on STA2X11
1026         select MFD_CORE
1027
1028 config MFD_SYSCON
1029         bool "System Controller Register R/W Based on Regmap"
1030         depends on OF
1031         select REGMAP_MMIO
1032         help
1033           Select this option to enable accessing system control registers
1034           via regmap.
1035
1036 config MFD_PALMAS
1037         bool "Support for the TI Palmas series chips"
1038         select MFD_CORE
1039         select REGMAP_I2C
1040         select REGMAP_IRQ
1041         depends on I2C=y
1042         help
1043           If you say yes here you get support for the Palmas
1044           series of PMIC chips from Texas Instruments.
1045
1046 endmenu
1047 endif
1048
1049 menu "Multimedia Capabilities Port drivers"
1050         depends on ARCH_SA1100
1051
1052 config MCP
1053         tristate
1054
1055 # Interface drivers
1056 config MCP_SA11X0
1057         tristate "Support SA11x0 MCP interface"
1058         depends on ARCH_SA1100
1059         select MCP
1060
1061 # Chip drivers
1062 config MCP_UCB1200
1063         bool "Support for UCB1200 / UCB1300"
1064         depends on MCP_SA11X0
1065         select MCP
1066
1067 config MCP_UCB1200_TS
1068         tristate "Touchscreen interface support"
1069         depends on MCP_UCB1200 && INPUT
1070
1071 endmenu