drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 menu "Multifunction device drivers"
   6         depends on HAS_IOMEM
   7
   8 config MFD_CORE
   9         tristate
  10         default n
  11
  12 config MFD_SM501
  13         tristate "Support for Silicon Motion SM501"
  14          ---help---
  15           This is the core driver for the Silicon Motion SM501 multimedia
  16           companion chip. This device is a multifunction device which may
  17           provide numerous interfaces including USB host controller, USB gadget,
  18           asynchronous serial ports, audio functions, and a dual display video
  19           interface. The device may be connected by PCI or local bus with
  20           varying functions enabled.
  21
  22 config MFD_SM501_GPIO
  23         bool "Export GPIO via GPIO layer"
  24         depends on MFD_SM501 && GPIOLIB
  25          ---help---
  26          This option uses the gpio library layer to export the 64 GPIO
  27          lines on the SM501. The platform data is used to supply the
  28          base number for the first GPIO line to register.
  29
  30 config MFD_ASIC3
  31         bool "Support for Compaq ASIC3"
  32         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  33          ---help---
  34           This driver supports the ASIC3 multifunction chip found on many
  35           PDAs (mainly iPAQ and HTC based ones)
  36
  37 config MFD_DM355EVM_MSP
  38         bool "DaVinci DM355 EVM microcontroller"
  39         depends on I2C && MACH_DAVINCI_DM355_EVM
  40         help
  41           This driver supports the MSP430 microcontroller used on these
  42           boards.  MSP430 firmware manages resets and power sequencing,
  43           inputs from buttons and the IR remote, LEDs, an RTC, and more.
  44
  45 config HTC_EGPIO
  46         bool "HTC EGPIO support"
  47         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  48         help
  49             This driver supports the CPLD egpio chip present on
  50             several HTC phones.  It provides basic support for input
  51             pins, output pins, and irqs.
  52
  53 config HTC_PASIC3
  54         tristate "HTC PASIC3 LED/DS1WM chip support"
  55         select MFD_CORE
  56         help
  57           This core driver provides register access for the LED/DS1WM
  58           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
  59           HTC Magician devices, respectively. Actual functionality is
  60           handled by the leds-pasic3 and ds1wm drivers.
  61
  62 config UCB1400_CORE
  63         tristate "Philips UCB1400 Core driver"
  64         depends on AC97_BUS
  65         depends on GPIOLIB
  66         help
  67           This enables support for the Philips UCB1400 core functions.
  68           The UCB1400 is an AC97 audio codec.
  69
  70           To compile this driver as a module, choose M here: the
  71           module will be called ucb1400_core.
  72
  73 config TPS65010
  74         tristate "TPS6501x Power Management chips"
  75         depends on I2C && GPIOLIB
  76         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
  77         help
  78           If you say yes here you get support for the TPS6501x series of
  79           Power Management chips.  These include voltage regulators,
  80           lithium ion/polymer battery charging, and other features that
  81           are often used in portable devices like cell phones and cameras.
  82
  83           This driver can also be built as a module.  If so, the module
  84           will be called tps65010.
  85
  86 config MENELAUS
  87         bool "Texas Instruments TWL92330/Menelaus PM chip"
  88         depends on I2C=y && ARCH_OMAP24XX
  89         help
  90           If you say yes here you get support for the Texas Instruments
  91           TWL92330/Menelaus Power Management chip. This include voltage
  92           regulators, Dual slot memory card transceivers, real-time clock
  93           and other features that are often used in portable devices like
  94           cell phones and PDAs.
  95
  96 config TWL4030_CORE
  97         bool "Texas Instruments TWL4030/TPS659x0 Support"
  98         depends on I2C=y && GENERIC_HARDIRQS
  99         help
 100           Say yes here if you have TWL4030 family chip on your board.
 101           This core driver provides register access and IRQ handling
 102           facilities, and registers devices for the various functions
 103           so that function-specific drivers can bind to them.
 104
 105           These multi-function chips are found on many OMAP2 and OMAP3
 106           boards, providing power management, RTC, GPIO, keypad, a
 107           high speed USB OTG transceiver, an audio codec (on most
 108           versions) and many other features.
 109
 110 config MFD_TMIO
 111         bool
 112         default n
 113
 114 config MFD_T7L66XB
 115         bool "Support Toshiba T7L66XB"
 116         depends on ARM && HAVE_CLK
 117         select MFD_CORE
 118         select MFD_TMIO
 119         help
 120           Support for Toshiba Mobile IO Controller T7L66XB
 121
 122 config MFD_TC6387XB
 123         bool "Support Toshiba TC6387XB"
 124         depends on ARM && HAVE_CLK
 125         select MFD_CORE
 126         select MFD_TMIO
 127         help
 128           Support for Toshiba Mobile IO Controller TC6387XB
 129
 130 config MFD_TC6393XB
 131         bool "Support Toshiba TC6393XB"
 132         depends on GPIOLIB && ARM
 133         select MFD_CORE
 134         select MFD_TMIO
 135         help
 136           Support for Toshiba Mobile IO Controller TC6393XB
 137
 138 config PMIC_DA903X
 139         bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 140         depends on I2C=y
 141         help
 142           Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
 143           ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 144           usually found on PXA processors-based platforms. This includes
 145           the I2C driver and the core APIs _only_, you have to select
 146           individual components like LCD backlight, voltage regulators,
 147           LEDs and battery-charger under the corresponding menus.
 148
 149 config MFD_WM8400
 150         tristate "Support Wolfson Microelectronics WM8400"
 151         select MFD_CORE
 152         depends on I2C
 153         help
 154           Support for the Wolfson Microelecronics WM8400 PMIC and audio
 155           CODEC.  This driver adds provides common support for accessing
 156           the device, additional drivers must be enabled in order to use
 157           the functionality of the device.
 158
 159 config MFD_WM8350
 160         tristate
 161
 162 config MFD_WM8350_CONFIG_MODE_0
 163         bool
 164         depends on MFD_WM8350
 165
 166 config MFD_WM8350_CONFIG_MODE_1
 167         bool
 168         depends on MFD_WM8350
 169
 170 config MFD_WM8350_CONFIG_MODE_2
 171         bool
 172         depends on MFD_WM8350
 173
 174 config MFD_WM8350_CONFIG_MODE_3
 175         bool
 176         depends on MFD_WM8350
 177
 178 config MFD_WM8351_CONFIG_MODE_0
 179         bool
 180         depends on MFD_WM8350
 181
 182 config MFD_WM8351_CONFIG_MODE_1
 183         bool
 184         depends on MFD_WM8350
 185
 186 config MFD_WM8351_CONFIG_MODE_2
 187         bool
 188         depends on MFD_WM8350
 189
 190 config MFD_WM8351_CONFIG_MODE_3
 191         bool
 192         depends on MFD_WM8350
 193
 194 config MFD_WM8352_CONFIG_MODE_0
 195         bool
 196         depends on MFD_WM8350
 197
 198 config MFD_WM8352_CONFIG_MODE_1
 199         bool
 200         depends on MFD_WM8350
 201
 202 config MFD_WM8352_CONFIG_MODE_2
 203         bool
 204         depends on MFD_WM8350
 205
 206 config MFD_WM8352_CONFIG_MODE_3
 207         bool
 208         depends on MFD_WM8350
 209
 210 config MFD_WM8350_I2C
 211         tristate "Support Wolfson Microelectronics WM8350 with I2C"
 212         select MFD_WM8350
 213         depends on I2C
 214         help
 215           The WM8350 is an integrated audio and power management
 216           subsystem with watchdog and RTC functionality for embedded
 217           systems.  This option enables core support for the WM8350 with
 218           I2C as the control interface.  Additional options must be
 219           selected to enable support for the functionality of the chip.
 220
 221 config MFD_PCF50633
 222         tristate "Support for NXP PCF50633"
 223         depends on I2C
 224         help
 225           Say yes here if you have NXP PCF50633 chip on your board.
 226           This core driver provides register access and IRQ handling
 227           facilities, and registers devices for the various functions
 228           so that function-specific drivers can bind to them.
 229
 230 config PCF50633_ADC
 231         tristate "Support for NXP PCF50633 ADC"
 232         depends on MFD_PCF50633
 233         help
 234          Say yes here if you want to include support for ADC in the
 235          NXP PCF50633 chip.
 236
 237 config PCF50633_GPIO
 238         tristate "Support for NXP PCF50633 GPIO"
 239         depends on MFD_PCF50633
 240         help
 241          Say yes here if you want to include support GPIO for pins on
 242          the PCF50633 chip.
 243
 244 config AB3100_CORE
 245         tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 246         depends on I2C
 247         default y if ARCH_U300
 248         help
 249           Select this to enable the AB3100 Mixed Signal IC core
 250           functionality. This connects to a AB3100 on the I2C bus
 251           and expose a number of symbols needed for dependent devices
 252           to read and write registers and subscribe to events from
 253           this multi-functional IC. This is needed to use other features
 254           of the AB3100 such as battery-backed RTC, charging control,
 255           LEDs, vibrator, system power and temperature, power management
 256           and ALSA sound.
 257
 258 config EZX_PCAP
 259         bool "PCAP Support"
 260         depends on GENERIC_HARDIRQS && SPI_MASTER
 261         help
 262           This enables the PCAP ASIC present on EZX Phones. This is
 263           needed for MMC, TouchScreen, Sound, USB, etc..
 264
 265 endmenu
 266
 267 menu "Multimedia Capabilities Port drivers"
 268         depends on ARCH_SA1100
 269
 270 config MCP
 271         tristate
 272
 273 # Interface drivers
 274 config MCP_SA11X0
 275         tristate "Support SA11x0 MCP interface"
 276         depends on ARCH_SA1100
 277         select MCP
 278
 279 # Chip drivers
 280 config MCP_UCB1200
 281         tristate "Support for UCB1200 / UCB1300"
 282         depends on MCP
 283
 284 config MCP_UCB1200_TS
 285         tristate "Touchscreen interface support"
 286         depends on MCP_UCB1200 && INPUT
 287
 288 endmenu