drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 if HAS_IOMEM
   6 menu "Multifunction device drivers"
   7
   8 config MFD_CORE
   9         tristate
  10         select IRQ_DOMAIN
  11         default n
  12
  13 config MFD_CS5535
  14         tristate "AMD CS5535 and CS5536 southbridge core functions"
  15         select MFD_CORE
  16         depends on PCI && (X86_32 || (X86 && COMPILE_TEST))
  17         ---help---
  18           This is the core driver for CS5535/CS5536 MFD functions.  This is
  19           necessary for using the board's GPIO and MFGPT functionality.
  20
  21 config MFD_AS3711
  22         bool "AMS AS3711"
  23         select MFD_CORE
  24         select REGMAP_I2C
  25         select REGMAP_IRQ
  26         depends on I2C=y
  27         help
  28           Support for the AS3711 PMIC from AMS
  29
  30 config MFD_AS3722
  31         bool "ams AS3722 Power Management IC"
  32         select MFD_CORE
  33         select REGMAP_I2C
  34         select REGMAP_IRQ
  35         depends on I2C=y && OF
  36         help
  37           The ams AS3722 is a compact system PMU suitable for mobile phones,
  38           tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
  39           controllers, 11 LDOs, RTC, automatic battery, temperature and
  40           over current monitoring, GPIOs, ADC and a watchdog.
  41
  42 config PMIC_ADP5520
  43         bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
  44         depends on I2C=y
  45         help
  46           Say yes here to add support for Analog Devices AD5520 and ADP5501,
  47           Multifunction Power Management IC. This includes
  48           the I2C driver and the core APIs _only_, you have to select
  49           individual components like LCD backlight, LEDs, GPIOs and Kepad
  50           under the corresponding menus.
  51
  52 config MFD_AAT2870_CORE
  53         bool "AnalogicTech AAT2870"
  54         select MFD_CORE
  55         depends on I2C=y && GPIOLIB
  56         help
  57           If you say yes here you get support for the AAT2870.
  58           This driver provides common support for accessing the device,
  59           additional drivers must be enabled in order to use the
  60           functionality of the device.
  61
  62 config MFD_BCM590XX
  63         tristate "Broadcom BCM590xx PMUs"
  64         select MFD_CORE
  65         select REGMAP_I2C
  66         depends on I2C
  67         help
  68           Support for the BCM590xx PMUs from Broadcom
  69
  70 config MFD_AXP20X
  71         bool "X-Powers AXP20X"
  72         select MFD_CORE
  73         select REGMAP_I2C
  74         select REGMAP_IRQ
  75         depends on I2C=y
  76         help
  77           If you say Y here you get support for the X-Powers AXP202 and AXP209.
  78           This driver include only the core APIs. You have to select individual
  79           components like regulators or the PEK (Power Enable Key) under the
  80           corresponding menus.
  81
  82 config MFD_CROS_EC
  83         tristate "ChromeOS Embedded Controller"
  84         select MFD_CORE
  85         help
  86           If you say Y here you get support for the ChromeOS Embedded
  87           Controller (EC) providing keyboard, battery and power services.
  88           You also need to enable the driver for the bus you are using. The
  89           protocol for talking to the EC is defined by the bus driver.
  90
  91 config MFD_CROS_EC_I2C
  92         tristate "ChromeOS Embedded Controller (I2C)"
  93         depends on MFD_CROS_EC && I2C
  94
  95         help
  96           If you say Y here, you get support for talking to the ChromeOS
  97           EC through an I2C bus. This uses a simple byte-level protocol with
  98           a checksum. Failing accesses will be retried three times to
  99           improve reliability.
 100
 101 config MFD_CROS_EC_SPI
 102         tristate "ChromeOS Embedded Controller (SPI)"
 103         depends on MFD_CROS_EC && SPI && OF
 104
 105         ---help---
 106           If you say Y here, you get support for talking to the ChromeOS EC
 107           through a SPI bus, using a byte-level protocol. Since the EC's
 108           response time cannot be guaranteed, we support ignoring
 109           'pre-amble' bytes before the response actually starts.
 110
 111 config MFD_ASIC3
 112         bool "Compaq ASIC3"
 113         depends on GPIOLIB && ARM
 114         select MFD_CORE
 115          ---help---
 116           This driver supports the ASIC3 multifunction chip found on many
 117           PDAs (mainly iPAQ and HTC based ones)
 118
 119 config PMIC_DA903X
 120         bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 121         depends on I2C=y
 122         help
 123           Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
 124           ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 125           usually found on PXA processors-based platforms. This includes
 126           the I2C driver and the core APIs _only_, you have to select
 127           individual components like LCD backlight, voltage regulators,
 128           LEDs and battery-charger under the corresponding menus.
 129
 130 config PMIC_DA9052
 131         bool
 132         select MFD_CORE
 133
 134 config MFD_DA9052_SPI
 135         bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI"
 136         select REGMAP_SPI
 137         select REGMAP_IRQ
 138         select PMIC_DA9052
 139         depends on SPI_MASTER=y
 140         help
 141           Support for the Dialog Semiconductor DA9052 PMIC
 142           when controlled using SPI. This driver provides common support
 143           for accessing the device, additional drivers must be enabled in
 144           order to use the functionality of the device.
 145
 146 config MFD_DA9052_I2C
 147         bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C"
 148         select REGMAP_I2C
 149         select REGMAP_IRQ
 150         select PMIC_DA9052
 151         depends on I2C=y
 152         help
 153           Support for the Dialog Semiconductor DA9052 PMIC
 154           when controlled using I2C. This driver provides common support
 155           for accessing the device, additional drivers must be enabled in
 156           order to use the functionality of the device.
 157
 158 config MFD_DA9055
 159         bool "Dialog Semiconductor DA9055 PMIC Support"
 160         select REGMAP_I2C
 161         select REGMAP_IRQ
 162         select MFD_CORE
 163         depends on I2C=y
 164         help
 165           Say yes here for support of Dialog Semiconductor DA9055. This is
 166           a Power Management IC. This driver provides common support for
 167           accessing the device as well as the I2C interface to the chip itself.
 168           Additional drivers must be enabled in order to use the functionality
 169           of the device.
 170
 171           This driver can be built as a module. If built as a module it will be
 172           called "da9055"
 173
 174 config MFD_DA9063
 175         bool "Dialog Semiconductor DA9063 PMIC Support"
 176         select MFD_CORE
 177         select REGMAP_I2C
 178         select REGMAP_IRQ
 179         depends on I2C=y
 180         help
 181           Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
 182           This includes the I2C driver and core APIs.
 183           Additional drivers must be enabled in order to use the functionality
 184           of the device.
 185
 186 config MFD_MC13XXX
 187         tristate
 188         depends on (SPI_MASTER || I2C)
 189         select MFD_CORE
 190         select REGMAP_IRQ
 191         help
 192           Enable support for the Freescale MC13783 and MC13892 PMICs.
 193           This driver provides common support for accessing the device,
 194           additional drivers must be enabled in order to use the
 195           functionality of the device.
 196
 197 config MFD_MC13XXX_SPI
 198         tristate "Freescale MC13783 and MC13892 SPI interface"
 199         depends on SPI_MASTER
 200         select REGMAP_SPI
 201         select MFD_MC13XXX
 202         help
 203           Select this if your MC13xxx is connected via an SPI bus.
 204
 205 config MFD_MC13XXX_I2C
 206         tristate "Freescale MC13892 I2C interface"
 207         depends on I2C
 208         select REGMAP_I2C
 209         select MFD_MC13XXX
 210         help
 211           Select this if your MC13xxx is connected via an I2C bus.
 212
 213 config HTC_EGPIO
 214         bool "HTC EGPIO support"
 215         depends on GPIOLIB && ARM
 216         help
 217             This driver supports the CPLD egpio chip present on
 218             several HTC phones.  It provides basic support for input
 219             pins, output pins, and irqs.
 220
 221 config HTC_PASIC3
 222         tristate "HTC PASIC3 LED/DS1WM chip support"
 223         select MFD_CORE
 224         help
 225           This core driver provides register access for the LED/DS1WM
 226           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
 227           HTC Magician devices, respectively. Actual functionality is
 228           handled by the leds-pasic3 and ds1wm drivers.
 229
 230 config HTC_I2CPLD
 231         bool "HTC I2C PLD chip support"
 232         depends on I2C=y && GPIOLIB
 233         help
 234           If you say yes here you get support for the supposed CPLD
 235           found on omap850 HTC devices like the HTC Wizard and HTC Herald.
 236           This device provides input and output GPIOs through an I2C
 237           interface to one or more sub-chips.
 238
 239 config LPC_ICH
 240         tristate "Intel ICH LPC"
 241         depends on PCI
 242         select MFD_CORE
 243         help
 244           The LPC bridge function of the Intel ICH provides support for
 245           many functional units. This driver provides needed support for
 246           other drivers to control these functions, currently GPIO and
 247           watchdog.
 248
 249 config LPC_SCH
 250         tristate "Intel SCH LPC"
 251         depends on PCI
 252         select MFD_CORE
 253         help
 254           LPC bridge function of the Intel SCH provides support for
 255           System Management Bus and General Purpose I/O.
 256
 257 config INTEL_SOC_PMIC
 258         bool "Support for Intel Atom SoC PMIC"
 259         depends on I2C=y
 260         select MFD_CORE
 261         select REGMAP_I2C
 262         select REGMAP_IRQ
 263         help
 264           Select this option to enable support for the PMIC device
 265           on some Intel SoC systems. The PMIC provides ADC, GPIO,
 266           thermal, charger and related power management functions
 267           on these systems.
 268
 269 config MFD_INTEL_MSIC
 270         bool "Intel MSIC"
 271         depends on INTEL_SCU_IPC
 272         select MFD_CORE
 273         help
 274           Select this option to enable access to Intel MSIC (Avatele
 275           Passage) chip. This chip embeds audio, battery, GPIO, etc.
 276           devices used in Intel Medfield platforms.
 277
 278 config MFD_IPAQ_MICRO
 279         bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
 280         depends on SA1100_H3100 || SA1100_H3600
 281         select MFD_CORE
 282         help
 283           Select this to get support for the Microcontroller found in
 284           the Compaq iPAQ handheld computers. This is an Atmel
 285           AT90LS8535 microcontroller flashed with a special iPAQ
 286           firmware using the custom protocol implemented in this driver.
 287
 288 config MFD_JANZ_CMODIO
 289         tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
 290         select MFD_CORE
 291         depends on PCI
 292         help
 293           This is the core driver for the Janz CMOD-IO PCI MODULbus
 294           carrier board. This device is a PCI to MODULbus bridge which may
 295           host many different types of MODULbus daughterboards, including
 296           CAN and GPIO controllers.
 297
 298 config MFD_JZ4740_ADC
 299         bool "Janz JZ4740 ADC core"
 300         select MFD_CORE
 301         select GENERIC_IRQ_CHIP
 302         depends on MACH_JZ4740
 303         help
 304           Say yes here if you want support for the ADC unit in the JZ4740 SoC.
 305           This driver is necessary for jz4740-battery and jz4740-hwmon driver.
 306
 307 config MFD_KEMPLD
 308         tristate "Kontron module PLD device"
 309         select MFD_CORE
 310         help
 311           This is the core driver for the PLD (Programmable Logic Device) found
 312           on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD
 313           device may provide functions like watchdog, GPIO, UART and I2C bus.
 314
 315           The following modules are supported:
 316                 * COMe-bHL6
 317                 * COMe-bIP#
 318                 * COMe-bPC2 (ETXexpress-PC)
 319                 * COMe-bSC# (ETXexpress-SC T#)
 320                 * COMe-cBT6
 321                 * COMe-cCT6
 322                 * COMe-cDC2 (microETXexpress-DC)
 323                 * COMe-cHL6
 324                 * COMe-cPC2 (microETXexpress-PC)
 325                 * COMe-mBT10
 326                 * COMe-mCT10
 327                 * COMe-mTT10 (nanoETXexpress-TT)
 328                 * ETX-OH
 329
 330           This driver can also be built as a module. If so, the module
 331           will be called kempld-core.
 332
 333 config MFD_88PM800
 334         tristate "Marvell 88PM800"
 335         depends on I2C=y
 336         select REGMAP_I2C
 337         select REGMAP_IRQ
 338         select MFD_CORE
 339         help
 340           This supports for Marvell 88PM800 Power Management IC.
 341           This includes the I2C driver and the core APIs _only_, you have to
 342           select individual components like voltage regulators, RTC and
 343           battery-charger under the corresponding menus.
 344
 345 config MFD_88PM805
 346         tristate "Marvell 88PM805"
 347         depends on I2C=y
 348         select REGMAP_I2C
 349         select REGMAP_IRQ
 350         select MFD_CORE
 351         help
 352           This supports for Marvell 88PM805 Power Management IC. This includes
 353           the I2C driver and the core APIs _only_, you have to select individual
 354           components like codec device, headset/Mic device under the
 355           corresponding menus.
 356
 357 config MFD_88PM860X
 358         bool "Marvell 88PM8606/88PM8607"
 359         depends on I2C=y
 360         select REGMAP_I2C
 361         select MFD_CORE
 362         help
 363           This supports for Marvell 88PM8606/88PM8607 Power Management IC.
 364           This includes the I2C driver and the core APIs _only_, you have to
 365           select individual components like voltage regulators, RTC and
 366           battery-charger under the corresponding menus.
 367
 368 config MFD_MAX14577
 369         bool "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support"
 370         depends on I2C=y
 371         select MFD_CORE
 372         select REGMAP_I2C
 373         select REGMAP_IRQ
 374         select IRQ_DOMAIN
 375         help
 376           Say yes here to add support for Maxim Semiconductor MAX14577 and
 377           MAX77836 Micro-USB ICs with battery charger.
 378           This driver provides common support for accessing the device;
 379           additional drivers must be enabled in order to use the functionality
 380           of the device.
 381
 382 config MFD_MAX77686
 383         bool "Maxim Semiconductor MAX77686/802 PMIC Support"
 384         depends on I2C=y
 385         select MFD_CORE
 386         select REGMAP_I2C
 387         select REGMAP_IRQ
 388         select IRQ_DOMAIN
 389         help
 390           Say yes here to add support for Maxim Semiconductor MAX77686 and
 391           MAX77802 which are Power Management IC with an RTC on chip.
 392           This driver provides common support for accessing the device;
 393           additional drivers must be enabled in order to use the functionality
 394           of the device.
 395
 396 config MFD_MAX77693
 397         bool "Maxim Semiconductor MAX77693 PMIC Support"
 398         depends on I2C=y
 399         select MFD_CORE
 400         select REGMAP_I2C
 401         select REGMAP_IRQ
 402         help
 403           Say yes here to add support for Maxim Semiconductor MAX77693.
 404           This is a companion Power Management IC with Flash, Haptic, Charger,
 405           and MUIC(Micro USB Interface Controller) controls on chip.
 406           This driver provides common support for accessing the device;
 407           additional drivers must be enabled in order to use the functionality
 408           of the device.
 409
 410 config MFD_MAX8907
 411         tristate "Maxim Semiconductor MAX8907 PMIC Support"
 412         select MFD_CORE
 413         depends on I2C=y
 414         select REGMAP_I2C
 415         select REGMAP_IRQ
 416         help
 417           Say yes here to add support for Maxim Semiconductor MAX8907. This is
 418           a Power Management IC. This driver provides common support for
 419           accessing the device; additional drivers must be enabled in order
 420           to use the functionality of the device.
 421
 422 config MFD_MAX8925
 423         bool "Maxim Semiconductor MAX8925 PMIC Support"
 424         depends on I2C=y
 425         select MFD_CORE
 426         help
 427           Say yes here to add support for Maxim Semiconductor MAX8925. This is
 428           a Power Management IC. This driver provides common support for
 429           accessing the device, additional drivers must be enabled in order
 430           to use the functionality of the device.
 431
 432 config MFD_MAX8997
 433         bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
 434         depends on I2C=y
 435         select MFD_CORE
 436         select IRQ_DOMAIN
 437         help
 438           Say yes here to add support for Maxim Semiconductor MAX8997/8966.
 439           This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
 440           MUIC controls on chip.
 441           This driver provides common support for accessing the device;
 442           additional drivers must be enabled in order to use the functionality
 443           of the device.
 444
 445 config MFD_MAX8998
 446         bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
 447         depends on I2C=y
 448         select MFD_CORE
 449         select IRQ_DOMAIN
 450         help
 451           Say yes here to add support for Maxim Semiconductor MAX8998 and
 452           National Semiconductor LP3974. This is a Power Management IC.
 453           This driver provides common support for accessing the device,
 454           additional drivers must be enabled in order to use the functionality
 455           of the device.
 456
 457 config MFD_MENF21BMC
 458         tristate "MEN 14F021P00 Board Management Controller Support"
 459         depends on I2C
 460         select MFD_CORE
 461         help
 462           Say yes here to add support for the MEN 14F021P00 BMC
 463           which is a Board Management Controller connected to the I2C bus.
 464           The device supports multiple sub-devices like LED, HWMON and WDT.
 465           This driver provides common support for accessing the devices;
 466           additional drivers must be enabled in order to use the
 467           functionality of the BMC device.
 468
 469           This driver can also be built as a module. If so the module
 470           will be called menf21bmc.
 471
 472 config EZX_PCAP
 473         bool "Motorola EZXPCAP Support"
 474         depends on SPI_MASTER
 475         help
 476           This enables the PCAP ASIC present on EZX Phones. This is
 477           needed for MMC, TouchScreen, Sound, USB, etc..
 478
 479 config MFD_VIPERBOARD
 480         tristate "Nano River Technologies Viperboard"
 481         select MFD_CORE
 482         depends on USB
 483         default n
 484         help
 485           Say yes here if you want support for Nano River Technologies
 486           Viperboard.
 487           There are mfd cell drivers available for i2c master, adc and
 488           both gpios found on the board. The spi part does not yet
 489           have a driver.
 490           You need to select the mfd cell drivers separately.
 491           The drivers do not support all features the board exposes.
 492
 493 config MFD_RETU
 494         tristate "Nokia Retu and Tahvo multi-function device"
 495         select MFD_CORE
 496         depends on I2C
 497         select REGMAP_IRQ
 498         help
 499           Retu and Tahvo are a multi-function devices found on Nokia
 500           Internet Tablets (770, N800 and N810).
 501
 502 config MFD_PCF50633
 503         tristate "NXP PCF50633"
 504         depends on I2C
 505         select REGMAP_I2C
 506         help
 507           Say yes here if you have NXP PCF50633 chip on your board.
 508           This core driver provides register access and IRQ handling
 509           facilities, and registers devices for the various functions
 510           so that function-specific drivers can bind to them.
 511
 512 config PCF50633_ADC
 513         tristate "NXP PCF50633 ADC"
 514         depends on MFD_PCF50633
 515         help
 516          Say yes here if you want to include support for ADC in the
 517          NXP PCF50633 chip.
 518
 519 config PCF50633_GPIO
 520         tristate "NXP PCF50633 GPIO"
 521         depends on MFD_PCF50633
 522         help
 523          Say yes here if you want to include support GPIO for pins on
 524          the PCF50633 chip.
 525
 526 config UCB1400_CORE
 527         tristate "Philips UCB1400 Core driver"
 528         depends on AC97_BUS
 529         depends on GPIOLIB
 530         help
 531           This enables support for the Philips UCB1400 core functions.
 532           The UCB1400 is an AC97 audio codec.
 533
 534           To compile this driver as a module, choose M here: the
 535           module will be called ucb1400_core.
 536
 537 config MFD_PM8XXX
 538         tristate
 539
 540 config MFD_PM8921_CORE
 541         tristate "Qualcomm PM8921 PMIC chip"
 542         depends on (ARM || HEXAGON)
 543         select IRQ_DOMAIN
 544         select MFD_CORE
 545         select MFD_PM8XXX
 546         select REGMAP
 547         help
 548           If you say yes to this option, support will be included for the
 549           built-in PM8921 PMIC chip.
 550
 551           This is required if your board has a PM8921 and uses its features,
 552           such as: MPPs, GPIOs, regulators, interrupts, and PWM.
 553
 554           Say M here if you want to include support for PM8921 chip as a module.
 555           This will build a module called "pm8921-core".
 556
 557 config MFD_RDC321X
 558         tristate "RDC R-321x southbridge"
 559         select MFD_CORE
 560         depends on PCI
 561         help
 562           Say yes here if you want to have support for the RDC R-321x SoC
 563           southbridge which provides access to GPIOs and Watchdog using the
 564           southbridge PCI device configuration space.
 565
 566 config MFD_RTSX_PCI
 567         tristate "Realtek PCI-E card reader"
 568         depends on PCI
 569         select MFD_CORE
 570         help
 571           This supports for Realtek PCI-Express card reader including rts5209,
 572           rts5229, rtl8411, etc. Realtek card reader supports access to many
 573           types of memory cards, such as Memory Stick, Memory Stick Pro,
 574           Secure Digital and MultiMediaCard.
 575
 576 config MFD_RTSX_USB
 577         tristate "Realtek USB card reader"
 578         depends on USB
 579         select MFD_CORE
 580         help
 581           Select this option to get support for Realtek USB 2.0 card readers
 582           including RTS5129, RTS5139, RTS5179 and RTS5170.
 583           Realtek card reader supports access to many types of memory cards,
 584           such as Memory Stick Pro, Secure Digital and MultiMediaCard.
 585
 586 config MFD_RC5T583
 587         bool "Ricoh RC5T583 Power Management system device"
 588         depends on I2C=y
 589         select MFD_CORE
 590         select REGMAP_I2C
 591         help
 592           Select this option to get support for the RICOH583 Power
 593           Management system device.
 594           This driver provides common support for accessing the device
 595           through i2c interface. The device supports multiple sub-devices
 596           like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
 597           Additional drivers must be enabled in order to use the
 598           different functionality of the device.
 599
 600 config MFD_SEC_CORE
 601         bool "SAMSUNG Electronics PMIC Series Support"
 602         depends on I2C=y
 603         select MFD_CORE
 604         select REGMAP_I2C
 605         select REGMAP_IRQ
 606         select REGULATOR
 607         help
 608          Support for the Samsung Electronics MFD series.
 609          This driver provides common support for accessing the device,
 610          additional drivers must be enabled in order to use the functionality
 611          of the device
 612
 613 config MFD_SI476X_CORE
 614         tristate "Silicon Laboratories 4761/64/68 AM/FM radio."
 615         depends on I2C
 616         select MFD_CORE
 617         select REGMAP_I2C
 618         help
 619           This is the core driver for the SI476x series of AM/FM
 620           radio. This MFD driver connects the radio-si476x V4L2 module
 621           and the si476x audio codec.
 622
 623           To compile this driver as a module, choose M here: the
 624           module will be called si476x-core.
 625
 626 config MFD_SM501
 627         tristate "Silicon Motion SM501"
 628          ---help---
 629           This is the core driver for the Silicon Motion SM501 multimedia
 630           companion chip. This device is a multifunction device which may
 631           provide numerous interfaces including USB host controller, USB gadget,
 632           asynchronous serial ports, audio functions, and a dual display video
 633           interface. The device may be connected by PCI or local bus with
 634           varying functions enabled.
 635
 636 config MFD_SM501_GPIO
 637         bool "Export GPIO via GPIO layer"
 638         depends on MFD_SM501 && GPIOLIB
 639          ---help---
 640          This option uses the gpio library layer to export the 64 GPIO
 641          lines on the SM501. The platform data is used to supply the
 642          base number for the first GPIO line to register.
 643
 644 config MFD_SMSC
 645        bool "SMSC ECE1099 series chips"
 646        depends on I2C=y
 647        select MFD_CORE
 648        select REGMAP_I2C
 649        help
 650         If you say yes here you get support for the
 651         ece1099 chips from SMSC.
 652
 653         To compile this driver as a module, choose M here: the
 654         module will be called smsc.
 655
 656 config ABX500_CORE
 657         bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
 658         default y if ARCH_U300 || ARCH_U8500
 659         help
 660           Say yes here if you have the ABX500 Mixed Signal IC family
 661           chips. This core driver expose register access functions.
 662           Functionality specific drivers using these functions can
 663           remain unchanged when IC changes. Binding of the functions to
 664           actual register access is done by the IC core driver.
 665
 666 config AB3100_CORE
 667         bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 668         depends on I2C=y && ABX500_CORE
 669         select MFD_CORE
 670         default y if ARCH_U300
 671         help
 672           Select this to enable the AB3100 Mixed Signal IC core
 673           functionality. This connects to a AB3100 on the I2C bus
 674           and expose a number of symbols needed for dependent devices
 675           to read and write registers and subscribe to events from
 676           this multi-functional IC. This is needed to use other features
 677           of the AB3100 such as battery-backed RTC, charging control,
 678           LEDs, vibrator, system power and temperature, power management
 679           and ALSA sound.
 680
 681 config AB3100_OTP
 682         tristate "ST-Ericsson AB3100 OTP functions"
 683         depends on AB3100_CORE
 684         default y if AB3100_CORE
 685         help
 686           Select this to enable the AB3100 Mixed Signal IC OTP (one-time
 687           programmable memory) support. This exposes a sysfs file to read
 688           out OTP values.
 689
 690 config AB8500_CORE
 691         bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
 692         depends on ABX500_CORE && MFD_DB8500_PRCMU
 693         select POWER_SUPPLY
 694         select MFD_CORE
 695         select IRQ_DOMAIN
 696         help
 697           Select this option to enable access to AB8500 power management
 698           chip. This connects to U8500 either on the SSP/SPI bus (deprecated
 699           since hardware version v1.0) or the I2C bus via PRCMU. It also adds
 700           the irq_chip parts for handling the Mixed Signal chip events.
 701           This chip embeds various other multimedia funtionalities as well.
 702
 703 config AB8500_DEBUG
 704        bool "Enable debug info via debugfs"
 705        depends on AB8500_GPADC && DEBUG_FS
 706        default y if DEBUG_FS
 707        help
 708          Select this option if you want debug information using the debug
 709          filesystem, debugfs.
 710
 711 config AB8500_GPADC
 712         bool "ST-Ericsson AB8500 GPADC driver"
 713         depends on AB8500_CORE && REGULATOR_AB8500
 714         default y
 715         help
 716           AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
 717
 718 config MFD_DB8500_PRCMU
 719         bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
 720         depends on UX500_SOC_DB8500
 721         select MFD_CORE
 722         help
 723           Select this option to enable support for the DB8500 Power Reset
 724           and Control Management Unit. This is basically an autonomous
 725           system controller running an XP70 microprocessor, which is accessed
 726           through a register map.
 727
 728 config MFD_STMPE
 729         bool "STMicroelectronics STMPE"
 730         depends on (I2C=y || SPI_MASTER=y)
 731         depends on OF
 732         select MFD_CORE
 733         help
 734           Support for the STMPE family of I/O Expanders from
 735           STMicroelectronics.
 736
 737           Currently supported devices are:
 738
 739                 STMPE811: GPIO, Touchscreen
 740                 STMPE1601: GPIO, Keypad
 741                 STMPE1801: GPIO, Keypad
 742                 STMPE2401: GPIO, Keypad
 743                 STMPE2403: GPIO, Keypad
 744
 745           This driver provides common support for accessing the device,
 746           additional drivers must be enabled in order to use the functionality
 747           of the device.  Currently available sub drivers are:
 748
 749                 GPIO: stmpe-gpio
 750                 Keypad: stmpe-keypad
 751                 Touchscreen: stmpe-ts
 752
 753 menu "STMicroelectronics STMPE Interface Drivers"
 754 depends on MFD_STMPE
 755
 756 config STMPE_I2C
 757         bool "STMicroelectronics STMPE I2C Interface"
 758         depends on I2C=y
 759         default y
 760         help
 761           This is used to enable I2C interface of STMPE
 762
 763 config STMPE_SPI
 764         bool "STMicroelectronics STMPE SPI Interface"
 765         depends on SPI_MASTER
 766         help
 767           This is used to enable SPI interface of STMPE
 768 endmenu
 769
 770 config MFD_STA2X11
 771         bool "STMicroelectronics STA2X11"
 772         depends on STA2X11
 773         select MFD_CORE
 774         select REGMAP_MMIO
 775
 776 config MFD_SUN6I_PRCM
 777         bool "Allwinner A31 PRCM controller"
 778         depends on ARCH_SUNXI
 779         select MFD_CORE
 780         help
 781           Support for the PRCM (Power/Reset/Clock Management) unit available
 782           in A31 SoC.
 783
 784 config MFD_SYSCON
 785         bool "System Controller Register R/W Based on Regmap"
 786         select REGMAP_MMIO
 787         help
 788           Select this option to enable accessing system control registers
 789           via regmap.
 790
 791 config MFD_DAVINCI_VOICECODEC
 792         tristate
 793         select MFD_CORE
 794         select REGMAP_MMIO
 795
 796 config MFD_TI_AM335X_TSCADC
 797         tristate "TI ADC / Touch Screen chip support"
 798         select MFD_CORE
 799         select REGMAP
 800         select REGMAP_MMIO
 801         help
 802           If you say yes here you get support for Texas Instruments series
 803           of Touch Screen /ADC chips.
 804           To compile this driver as a module, choose M here: the
 805           module will be called ti_am335x_tscadc.
 806
 807 config MFD_DM355EVM_MSP
 808         bool "TI DaVinci DM355 EVM microcontroller"
 809         depends on I2C=y && MACH_DAVINCI_DM355_EVM
 810         help
 811           This driver supports the MSP430 microcontroller used on these
 812           boards.  MSP430 firmware manages resets and power sequencing,
 813           inputs from buttons and the IR remote, LEDs, an RTC, and more.
 814
 815 config MFD_LP3943
 816         tristate "TI/National Semiconductor LP3943 MFD Driver"
 817         depends on I2C
 818         select MFD_CORE
 819         select REGMAP_I2C
 820         help
 821           Support for the TI/National Semiconductor LP3943.
 822           This driver consists of GPIO and PWM drivers.
 823           With these functionalities, it can be used for LED string control or
 824           general usage such like a GPIO controller and a PWM controller.
 825
 826 config MFD_LP8788
 827         bool "TI LP8788 Power Management Unit Driver"
 828         depends on I2C=y
 829         select MFD_CORE
 830         select REGMAP_I2C
 831         select IRQ_DOMAIN
 832         help
 833           TI LP8788 PMU supports regulators, battery charger, RTC,
 834           ADC, backlight driver and current sinks.
 835
 836 config MFD_OMAP_USB_HOST
 837         bool "TI OMAP USBHS core and TLL driver"
 838         depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
 839         default y
 840         help
 841           This is the core driver for the OAMP EHCI and OHCI drivers.
 842           This MFD driver does the required setup functionalities for
 843           OMAP USB Host drivers.
 844
 845 config MFD_PALMAS
 846         bool "TI Palmas series chips"
 847         select MFD_CORE
 848         select REGMAP_I2C
 849         select REGMAP_IRQ
 850         depends on I2C=y
 851         help
 852           If you say yes here you get support for the Palmas
 853           series of PMIC chips from Texas Instruments.
 854
 855 config TPS6105X
 856         tristate "TI TPS61050/61052 Boost Converters"
 857         depends on I2C
 858         select REGULATOR
 859         select MFD_CORE
 860         select REGULATOR_FIXED_VOLTAGE
 861         help
 862           This option enables a driver for the TP61050/TPS61052
 863           high-power "white LED driver". This boost converter is
 864           sometimes used for other things than white LEDs, and
 865           also contains a GPIO pin.
 866
 867 config TPS65010
 868         tristate "TI TPS6501x Power Management chips"
 869         depends on I2C && GPIOLIB
 870         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
 871         help
 872           If you say yes here you get support for the TPS6501x series of
 873           Power Management chips.  These include voltage regulators,
 874           lithium ion/polymer battery charging, and other features that
 875           are often used in portable devices like cell phones and cameras.
 876
 877           This driver can also be built as a module.  If so, the module
 878           will be called tps65010.
 879
 880 config TPS6507X
 881         tristate "TI TPS6507x Power Management / Touch Screen chips"
 882         select MFD_CORE
 883         depends on I2C
 884         help
 885           If you say yes here you get support for the TPS6507x series of
 886           Power Management / Touch Screen chips.  These include voltage
 887           regulators, lithium ion/polymer battery charging, touch screen
 888           and other features that are often used in portable devices.
 889           This driver can also be built as a module.  If so, the module
 890           will be called tps6507x.
 891
 892 config TPS65911_COMPARATOR
 893         tristate
 894
 895 config MFD_TPS65090
 896         bool "TI TPS65090 Power Management chips"
 897         depends on I2C=y
 898         select MFD_CORE
 899         select REGMAP_I2C
 900         select REGMAP_IRQ
 901         help
 902           If you say yes here you get support for the TPS65090 series of
 903           Power Management chips.
 904           This driver provides common support for accessing the device,
 905           additional drivers must be enabled in order to use the
 906           functionality of the device.
 907
 908 config MFD_TPS65217
 909         tristate "TI TPS65217 Power Management / White LED chips"
 910         depends on I2C
 911         select MFD_CORE
 912         select REGMAP_I2C
 913         help
 914           If you say yes here you get support for the TPS65217 series of
 915           Power Management / White LED chips.
 916           These include voltage regulators, lithium ion/polymer battery
 917           charger, wled and other features that are often used in portable
 918           devices.
 919
 920           This driver can also be built as a module.  If so, the module
 921           will be called tps65217.
 922
 923 config MFD_TPS65218
 924         tristate "TI TPS65218 Power Management chips"
 925         depends on I2C
 926         select MFD_CORE
 927         select REGMAP_I2C
 928         select REGMAP_IRQ
 929         help
 930           If you say yes here you get support for the TPS65218 series of
 931           Power Management chips.
 932           These include voltage regulators, gpio and other features
 933           that are often used in portable devices. Only regulator
 934           component is currently supported.
 935
 936           This driver can also be built as a module.  If so, the module
 937           will be called tps65218.
 938
 939 config MFD_TPS6586X
 940         bool "TI TPS6586x Power Management chips"
 941         depends on I2C=y
 942         select MFD_CORE
 943         select REGMAP_I2C
 944         help
 945           If you say yes here you get support for the TPS6586X series of
 946           Power Management chips.
 947           This driver provides common support for accessing the device,
 948           additional drivers must be enabled in order to use the
 949           functionality of the device.
 950
 951           This driver can also be built as a module.  If so, the module
 952           will be called tps6586x.
 953
 954 config MFD_TPS65910
 955         bool "TI TPS65910 Power Management chip"
 956         depends on I2C=y && GPIOLIB
 957         select MFD_CORE
 958         select REGMAP_I2C
 959         select REGMAP_IRQ
 960         select IRQ_DOMAIN
 961         help
 962           if you say yes here you get support for the TPS65910 series of
 963           Power Management chips.
 964
 965 config MFD_TPS65912
 966         bool "TI TPS65912 Power Management chip"
 967         depends on GPIOLIB
 968         select MFD_CORE
 969         help
 970           If you say yes here you get support for the TPS65912 series of
 971           PM chips.
 972
 973 config MFD_TPS65912_I2C
 974         bool "TI TPS65912 Power Management chip with I2C"
 975         select MFD_CORE
 976         select MFD_TPS65912
 977         depends on I2C=y && GPIOLIB
 978         help
 979           If you say yes here you get support for the TPS65912 series of
 980           PM chips with I2C interface.
 981
 982 config MFD_TPS65912_SPI
 983         bool "TI TPS65912 Power Management chip with SPI"
 984         select MFD_CORE
 985         select MFD_TPS65912
 986         depends on SPI_MASTER && GPIOLIB
 987         help
 988           If you say yes here you get support for the TPS65912 series of
 989           PM chips with SPI interface.
 990
 991 config MFD_TPS80031
 992         bool "TI TPS80031/TPS80032 Power Management chips"
 993         depends on I2C=y
 994         select MFD_CORE
 995         select REGMAP_I2C
 996         select REGMAP_IRQ
 997         help
 998           If you say yes here you get support for the Texas Instruments
 999           TPS80031/ TPS80032 Fully Integrated Power Management with Power
1000           Path and Battery Charger. The device provides five configurable
1001           step-down converters, 11 general purpose LDOs, USB OTG Module,
1002           ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
1003           Power Path from USB, 32K clock generator.
1004
1005 config TWL4030_CORE
1006         bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
1007         depends on I2C=y
1008         select IRQ_DOMAIN
1009         select REGMAP_I2C
1010         help
1011           Say yes here if you have TWL4030 / TWL6030 family chip on your board.
1012           This core driver provides register access and IRQ handling
1013           facilities, and registers devices for the various functions
1014           so that function-specific drivers can bind to them.
1015
1016           These multi-function chips are found on many OMAP2 and OMAP3
1017           boards, providing power management, RTC, GPIO, keypad, a
1018           high speed USB OTG transceiver, an audio codec (on most
1019           versions) and many other features.
1020
1021 config TWL4030_POWER
1022         bool "TI TWL4030 power resources"
1023         depends on TWL4030_CORE && ARM
1024         help
1025           Say yes here if you want to use the power resources on the
1026           TWL4030 family chips.  Most of these resources are regulators,
1027           which have a separate driver; some are control signals, such
1028           as clock request handshaking.
1029
1030           This driver uses board-specific data to initialize the resources
1031           and load scripts controlling which resources are switched off/on
1032           or reset when a sleep, wakeup or warm reset event occurs.
1033
1034 config MFD_TWL4030_AUDIO
1035         bool "TI TWL4030 Audio"
1036         depends on TWL4030_CORE
1037         select MFD_CORE
1038         default n
1039
1040 config TWL6040_CORE
1041         bool "TI TWL6040 audio codec"
1042         depends on I2C=y
1043         select MFD_CORE
1044         select REGMAP_I2C
1045         select REGMAP_IRQ
1046         default n
1047         help
1048           Say yes here if you want support for Texas Instruments TWL6040 audio
1049           codec.
1050           This driver provides common support for accessing the device,
1051           additional drivers must be enabled in order to use the
1052           functionality of the device (audio, vibra).
1053
1054 config MENELAUS
1055         bool "TI TWL92330/Menelaus PM chip"
1056         depends on I2C=y && ARCH_OMAP2
1057         help
1058           If you say yes here you get support for the Texas Instruments
1059           TWL92330/Menelaus Power Management chip. This include voltage
1060           regulators, Dual slot memory card transceivers, real-time clock
1061           and other features that are often used in portable devices like
1062           cell phones and PDAs.
1063
1064 config MFD_WL1273_CORE
1065         tristate "TI WL1273 FM radio"
1066         depends on I2C
1067         select MFD_CORE
1068         default n
1069         help
1070           This is the core driver for the TI WL1273 FM radio. This MFD
1071           driver connects the radio-wl1273 V4L2 module and the wl1273
1072           audio codec.
1073
1074 config MFD_LM3533
1075         tristate "TI/National Semiconductor LM3533 Lighting Power chip"
1076         depends on I2C
1077         select MFD_CORE
1078         select REGMAP_I2C
1079         help
1080           Say yes here to enable support for National Semiconductor / TI
1081           LM3533 Lighting Power chips.
1082
1083           This driver provides common support for accessing the device;
1084           additional drivers must be enabled in order to use the LED,
1085           backlight or ambient-light-sensor functionality of the device.
1086
1087 config MFD_TIMBERDALE
1088         tristate "Timberdale FPGA"
1089         select MFD_CORE
1090         depends on PCI && GPIOLIB && (X86_32 || COMPILE_TEST)
1091         ---help---
1092         This is the core driver for the timberdale FPGA. This device is a
1093         multifunction device which exposes numerous platform devices.
1094
1095         The timberdale FPGA can be found on the Intel Atom development board
1096         for in-vehicle infontainment, called Russellville.
1097
1098 config MFD_TC3589X
1099         bool "Toshiba TC35892 and variants"
1100         depends on I2C=y
1101         select MFD_CORE
1102         help
1103           Support for the Toshiba TC35892 and variants I/O Expander.
1104
1105           This driver provides common support for accessing the device,
1106           additional drivers must be enabled in order to use the
1107           functionality of the device.
1108
1109 config MFD_TMIO
1110         bool
1111         default n
1112
1113 config MFD_T7L66XB
1114         bool "Toshiba T7L66XB"
1115         depends on ARM && HAVE_CLK
1116         select MFD_CORE
1117         select MFD_TMIO
1118         help
1119           Support for Toshiba Mobile IO Controller T7L66XB
1120
1121 config MFD_TC6387XB
1122         bool "Toshiba TC6387XB"
1123         depends on ARM && HAVE_CLK
1124         select MFD_CORE
1125         select MFD_TMIO
1126         help
1127           Support for Toshiba Mobile IO Controller TC6387XB
1128
1129 config MFD_TC6393XB
1130         bool "Toshiba TC6393XB"
1131         depends on ARM && HAVE_CLK
1132         select GPIOLIB
1133         select MFD_CORE
1134         select MFD_TMIO
1135         help
1136           Support for Toshiba Mobile IO Controller TC6393XB
1137
1138 config MFD_VX855
1139         tristate "VIA VX855/VX875 integrated south bridge"
1140         depends on PCI
1141         select MFD_CORE
1142         help
1143           Say yes here to enable support for various functions of the
1144           VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
1145           and/or vx855_gpio drivers for this to do anything useful.
1146
1147 config MFD_ARIZONA
1148         select REGMAP
1149         select REGMAP_IRQ
1150         select MFD_CORE
1151         bool
1152
1153 config MFD_ARIZONA_I2C
1154         tristate "Wolfson Microelectronics Arizona platform with I2C"
1155         select MFD_ARIZONA
1156         select MFD_CORE
1157         select REGMAP_I2C
1158         depends on I2C
1159         help
1160           Support for the Wolfson Microelectronics Arizona platform audio SoC
1161           core functionality controlled via I2C.
1162
1163 config MFD_ARIZONA_SPI
1164         tristate "Wolfson Microelectronics Arizona platform with SPI"
1165         select MFD_ARIZONA
1166         select MFD_CORE
1167         select REGMAP_SPI
1168         depends on SPI_MASTER
1169         help
1170           Support for the Wolfson Microelectronics Arizona platform audio SoC
1171           core functionality controlled via I2C.
1172
1173 config MFD_WM5102
1174         bool "Wolfson Microelectronics WM5102"
1175         depends on MFD_ARIZONA
1176         help
1177           Support for Wolfson Microelectronics WM5102 low power audio SoC
1178
1179 config MFD_WM5110
1180         bool "Wolfson Microelectronics WM5110"
1181         depends on MFD_ARIZONA
1182         help
1183           Support for Wolfson Microelectronics WM5110 low power audio SoC
1184
1185 config MFD_WM8997
1186         bool "Wolfson Microelectronics WM8997"
1187         depends on MFD_ARIZONA
1188         help
1189           Support for Wolfson Microelectronics WM8997 low power audio SoC
1190
1191 config MFD_WM8400
1192         bool "Wolfson Microelectronics WM8400"
1193         select MFD_CORE
1194         depends on I2C=y
1195         select REGMAP_I2C
1196         help
1197           Support for the Wolfson Microelecronics WM8400 PMIC and audio
1198           CODEC.  This driver provides common support for accessing
1199           the device, additional drivers must be enabled in order to use
1200           the functionality of the device.
1201
1202 config MFD_WM831X
1203         bool
1204
1205 config MFD_WM831X_I2C
1206         bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
1207         select MFD_CORE
1208         select MFD_WM831X
1209         select REGMAP_I2C
1210         select IRQ_DOMAIN
1211         depends on I2C=y
1212         help
1213           Support for the Wolfson Microelecronics WM831x and WM832x PMICs
1214           when controlled using I2C.  This driver provides common support
1215           for accessing the device, additional drivers must be enabled in
1216           order to use the functionality of the device.
1217
1218 config MFD_WM831X_SPI
1219         bool "Wolfson Microelectronics WM831x/2x PMICs with SPI"
1220         select MFD_CORE
1221         select MFD_WM831X
1222         select REGMAP_SPI
1223         select IRQ_DOMAIN
1224         depends on SPI_MASTER
1225         help
1226           Support for the Wolfson Microelecronics WM831x and WM832x PMICs
1227           when controlled using SPI.  This driver provides common support
1228           for accessing the device, additional drivers must be enabled in
1229           order to use the functionality of the device.
1230
1231 config MFD_WM8350
1232         bool
1233
1234 config MFD_WM8350_I2C
1235         bool "Wolfson Microelectronics WM8350 with I2C"
1236         select MFD_WM8350
1237         depends on I2C=y
1238         help
1239           The WM8350 is an integrated audio and power management
1240           subsystem with watchdog and RTC functionality for embedded
1241           systems.  This option enables core support for the WM8350 with
1242           I2C as the control interface.  Additional options must be
1243           selected to enable support for the functionality of the chip.
1244
1245 config MFD_WM8994
1246         bool "Wolfson Microelectronics WM8994"
1247         select MFD_CORE
1248         select REGMAP_I2C
1249         select REGMAP_IRQ
1250         depends on I2C=y
1251         help
1252           The WM8994 is a highly integrated hi-fi CODEC designed for
1253           smartphone applicatiosn.  As well as audio functionality it
1254           has on board GPIO and regulator functionality which is
1255           supported via the relevant subsystems.  This driver provides
1256           core support for the WM8994, in order to use the actual
1257           functionaltiy of the device other drivers must be enabled.
1258
1259 config MFD_STW481X
1260         tristate "Support for ST Microelectronics STw481x"
1261         depends on I2C && ARCH_NOMADIK
1262         select REGMAP_I2C
1263         select MFD_CORE
1264         help
1265           Select this option to enable the STw481x chip driver used
1266           in various ST Microelectronics and ST-Ericsson embedded
1267           Nomadik series.
1268
1269 menu "Multimedia Capabilities Port drivers"
1270         depends on ARCH_SA1100
1271
1272 config MCP
1273         tristate
1274
1275 # Interface drivers
1276 config MCP_SA11X0
1277         tristate "Support SA11x0 MCP interface"
1278         depends on ARCH_SA1100
1279         select MCP
1280
1281 # Chip drivers
1282 config MCP_UCB1200
1283         tristate "Support for UCB1200 / UCB1300"
1284         depends on MCP_SA11X0
1285         select MCP
1286
1287 config MCP_UCB1200_TS
1288         tristate "Touchscreen interface support"
1289         depends on MCP_UCB1200 && INPUT
1290
1291 endmenu
1292
1293 config MFD_VEXPRESS_SYSREG
1294         bool "Versatile Express System Registers"
1295         depends on VEXPRESS_CONFIG && GPIOLIB
1296         default y
1297         select CLKSRC_MMIO
1298         select GPIO_GENERIC_PLATFORM
1299         select MFD_CORE
1300         select MFD_SYSCON
1301         help
1302           System Registers are the platform configuration block
1303           on the ARM Ltd. Versatile Express board.
1304
1305 endmenu
1306 endif