1 /* ac3200.c: A driver for the Ansel Communications EISA ethernet adaptor. */
3 Written 1993, 1994 by Donald Becker.
4 Copyright 1993 United States Government as represented by the Director,
5 National Security Agency. This software may only be used and distributed
6 according to the terms of the GNU General Public License as modified by SRC,
7 incorporated herein by reference.
9 The author may be reached as becker@scyld.com, or C/O
10 Scyld Computing Corporation
11 410 Severn Ave., Suite 210
14 This is driver for the Ansel Communications Model 3200 EISA Ethernet LAN
15 Adapter. The programming information is from the users manual, as related
16 by glee@ardnassak.math.clemson.edu.
20 Paul Gortmaker 05/98 : add support for shared mem above 1MB.
24 static const char version
[] =
25 "ac3200.c:v1.01 7/1/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
27 #include <linux/module.h>
28 #include <linux/eisa.h>
29 #include <linux/kernel.h>
30 #include <linux/errno.h>
31 #include <linux/string.h>
32 #include <linux/netdevice.h>
33 #include <linux/etherdevice.h>
34 #include <linux/init.h>
36 #include <asm/system.h>
42 #define DRV_NAME "ac3200"
44 /* Offsets from the base address. */
45 #define AC_NIC_BASE 0x00
46 #define AC_SA_PROM 0x16 /* The station address PROM. */
47 #define AC_ADDR0 0x00 /* Prefix station address values. */
50 #define AC_ID_PORT 0xC80
51 #define AC_EISA_ID 0x0110d305
52 #define AC_RESET_PORT 0xC84
54 #define AC_ENABLE 0x01
55 #define AC_CONFIG 0xC90 /* The configuration port. */
57 #define AC_IO_EXTENT 0x20
58 /* Actually accessed is:
66 /* Decoding of the configuration register. */
67 static unsigned char config2irqmap
[8] __initdata
= {15, 12, 11, 10, 9, 7, 5, 3};
68 static int addrmap
[8] =
69 {0xFF0000, 0xFE0000, 0xFD0000, 0xFFF0000, 0xFFE0000, 0xFFC0000, 0xD0000, 0 };
70 static const char *port_name
[4] = { "10baseT", "invalid", "AUI", "10base2"};
72 #define config2irq(configval) config2irqmap[((configval) >> 3) & 7]
73 #define config2mem(configval) addrmap[(configval) & 7]
74 #define config2name(configval) port_name[((configval) >> 6) & 3]
76 /* First and last 8390 pages. */
77 #define AC_START_PG 0x00 /* First page of 8390 TX buffer */
78 #define AC_STOP_PG 0x80 /* Last page +1 of the 8390 RX ring */
80 static int ac_probe1(int ioaddr
, struct net_device
*dev
);
82 static int ac_open(struct net_device
*dev
);
83 static void ac_reset_8390(struct net_device
*dev
);
84 static void ac_block_input(struct net_device
*dev
, int count
,
85 struct sk_buff
*skb
, int ring_offset
);
86 static void ac_block_output(struct net_device
*dev
, const int count
,
87 const unsigned char *buf
, const int start_page
);
88 static void ac_get_8390_hdr(struct net_device
*dev
, struct e8390_pkt_hdr
*hdr
,
91 static int ac_close_card(struct net_device
*dev
);
94 /* Probe for the AC3200.
96 The AC3200 can be identified by either the EISA configuration registers,
97 or the unique value in the station address PROM.
100 static int __init
do_ac3200_probe(struct net_device
*dev
)
102 unsigned short ioaddr
= dev
->base_addr
;
104 int mem_start
= dev
->mem_start
;
106 if (ioaddr
> 0x1ff) /* Check a single specified location. */
107 return ac_probe1(ioaddr
, dev
);
108 else if (ioaddr
> 0) /* Don't probe at all. */
114 for (ioaddr
= 0x1000; ioaddr
< 0x9000; ioaddr
+= 0x1000) {
115 if (ac_probe1(ioaddr
, dev
) == 0)
118 dev
->mem_start
= mem_start
;
125 struct net_device
* __init
ac3200_probe(int unit
)
127 struct net_device
*dev
= alloc_ei_netdev();
131 return ERR_PTR(-ENOMEM
);
133 sprintf(dev
->name
, "eth%d", unit
);
134 netdev_boot_setup_check(dev
);
136 err
= do_ac3200_probe(dev
);
146 static int __init
ac_probe1(int ioaddr
, struct net_device
*dev
)
150 if (!request_region(ioaddr
, AC_IO_EXTENT
, DRV_NAME
))
153 if (inb_p(ioaddr
+ AC_ID_PORT
) == 0xff) {
158 if (inl(ioaddr
+ AC_ID_PORT
) != AC_EISA_ID
) {
163 #ifndef final_version
164 printk(KERN_DEBUG
"AC3200 ethercard configuration register is %#02x,"
165 " EISA ID %02x %02x %02x %02x.\n", inb(ioaddr
+ AC_CONFIG
),
166 inb(ioaddr
+ AC_ID_PORT
+ 0), inb(ioaddr
+ AC_ID_PORT
+ 1),
167 inb(ioaddr
+ AC_ID_PORT
+ 2), inb(ioaddr
+ AC_ID_PORT
+ 3));
170 for (i
= 0; i
< 6; i
++)
171 dev
->dev_addr
[i
] = inb(ioaddr
+ AC_SA_PROM
+ i
);
173 printk(KERN_DEBUG
"AC3200 in EISA slot %d, node %pM",
174 ioaddr
/0x1000, dev
->dev_addr
);
176 /* Check the vendor ID/prefix. Redundant after checking the EISA ID */
177 if (inb(ioaddr
+ AC_SA_PROM
+ 0) != AC_ADDR0
178 || inb(ioaddr
+ AC_SA_PROM
+ 1) != AC_ADDR1
179 || inb(ioaddr
+ AC_SA_PROM
+ 2) != AC_ADDR2
) {
180 printk(", not found (invalid prefix).\n");
186 /* Assign and allocate the interrupt now. */
188 dev
->irq
= config2irq(inb(ioaddr
+ AC_CONFIG
));
191 dev
->irq
= irq_canonicalize(dev
->irq
);
192 printk(", assigning");
195 retval
= request_irq(dev
->irq
, ei_interrupt
, 0, DRV_NAME
, dev
);
197 printk (" nothing! Unable to get IRQ %d.\n", dev
->irq
);
201 printk(" IRQ %d, %s port\n", dev
->irq
, port_name
[dev
->if_port
]);
203 dev
->base_addr
= ioaddr
;
206 if (dev
->mem_start
) { /* Override the value from the board. */
207 for (i
= 0; i
< 7; i
++)
208 if (addrmap
[i
] == dev
->mem_start
)
212 outb((inb(ioaddr
+ AC_CONFIG
) & ~7) | i
, ioaddr
+ AC_CONFIG
);
216 dev
->if_port
= inb(ioaddr
+ AC_CONFIG
) >> 6;
217 dev
->mem_start
= config2mem(inb(ioaddr
+ AC_CONFIG
));
219 printk("%s: AC3200 at %#3x with %dkB memory at physical address %#lx.\n",
220 dev
->name
, ioaddr
, AC_STOP_PG
/4, dev
->mem_start
);
223 * BEWARE!! Some dain-bramaged EISA SCUs will allow you to put
224 * the card mem within the region covered by `normal' RAM !!!
226 * ioremap() will fail in that case.
228 ei_status
.mem
= ioremap(dev
->mem_start
, AC_STOP_PG
*0x100);
229 if (!ei_status
.mem
) {
230 printk(KERN_ERR
"ac3200.c: Unable to remap card memory above 1MB !!\n");
231 printk(KERN_ERR
"ac3200.c: Try using EISA SCU to set memory below 1MB.\n");
232 printk(KERN_ERR
"ac3200.c: Driver NOT installed.\n");
236 printk("ac3200.c: remapped %dkB card memory to virtual address %p\n",
237 AC_STOP_PG
/4, ei_status
.mem
);
239 dev
->mem_start
= (unsigned long)ei_status
.mem
;
240 dev
->mem_end
= dev
->mem_start
+ (AC_STOP_PG
- AC_START_PG
)*256;
242 ei_status
.name
= "AC3200";
243 ei_status
.tx_start_page
= AC_START_PG
;
244 ei_status
.rx_start_page
= AC_START_PG
+ TX_PAGES
;
245 ei_status
.stop_page
= AC_STOP_PG
;
246 ei_status
.word16
= 1;
251 ei_status
.reset_8390
= &ac_reset_8390
;
252 ei_status
.block_input
= &ac_block_input
;
253 ei_status
.block_output
= &ac_block_output
;
254 ei_status
.get_8390_hdr
= &ac_get_8390_hdr
;
256 dev
->open
= &ac_open
;
257 dev
->stop
= &ac_close_card
;
258 #ifdef CONFIG_NET_POLL_CONTROLLER
259 dev
->poll_controller
= ei_poll
;
263 retval
= register_netdev(dev
);
269 iounmap(ei_status
.mem
);
271 free_irq(dev
->irq
, dev
);
273 release_region(ioaddr
, AC_IO_EXTENT
);
277 static int ac_open(struct net_device
*dev
)
280 /* Someday we may enable the IRQ and shared memory here. */
281 int ioaddr
= dev
->base_addr
;
288 static void ac_reset_8390(struct net_device
*dev
)
290 ushort ioaddr
= dev
->base_addr
;
292 outb(AC_RESET
, ioaddr
+ AC_RESET_PORT
);
293 if (ei_debug
> 1) printk("resetting AC3200, t=%ld...", jiffies
);
296 outb(AC_ENABLE
, ioaddr
+ AC_RESET_PORT
);
297 if (ei_debug
> 1) printk("reset done\n");
302 /* Grab the 8390 specific header. Similar to the block_input routine, but
303 we don't need to be concerned with ring wrap as the header will be at
304 the start of a page, so we optimize accordingly. */
307 ac_get_8390_hdr(struct net_device
*dev
, struct e8390_pkt_hdr
*hdr
, int ring_page
)
309 void __iomem
*hdr_start
= ei_status
.mem
+ ((ring_page
- AC_START_PG
)<<8);
310 memcpy_fromio(hdr
, hdr_start
, sizeof(struct e8390_pkt_hdr
));
313 /* Block input and output are easy on shared memory ethercards, the only
314 complication is when the ring buffer wraps. */
316 static void ac_block_input(struct net_device
*dev
, int count
, struct sk_buff
*skb
,
319 void __iomem
*start
= ei_status
.mem
+ ring_offset
- AC_START_PG
*256;
321 if (ring_offset
+ count
> AC_STOP_PG
*256) {
322 /* We must wrap the input move. */
323 int semi_count
= AC_STOP_PG
*256 - ring_offset
;
324 memcpy_fromio(skb
->data
, start
, semi_count
);
326 memcpy_fromio(skb
->data
+ semi_count
,
327 ei_status
.mem
+ TX_PAGES
*256, count
);
329 memcpy_fromio(skb
->data
, start
, count
);
333 static void ac_block_output(struct net_device
*dev
, int count
,
334 const unsigned char *buf
, int start_page
)
336 void __iomem
*shmem
= ei_status
.mem
+ ((start_page
- AC_START_PG
)<<8);
338 memcpy_toio(shmem
, buf
, count
);
341 static int ac_close_card(struct net_device
*dev
)
344 printk("%s: Shutting down ethercard.\n", dev
->name
);
347 /* We should someday disable shared memory and interrupts. */
348 outb(0x00, ioaddr
+ 6); /* Disable interrupts. */
349 free_irq(dev
->irq
, dev
);
357 #define MAX_AC32_CARDS 4 /* Max number of AC32 cards per module */
358 static struct net_device
*dev_ac32
[MAX_AC32_CARDS
];
359 static int io
[MAX_AC32_CARDS
];
360 static int irq
[MAX_AC32_CARDS
];
361 static int mem
[MAX_AC32_CARDS
];
362 module_param_array(io
, int, NULL
, 0);
363 module_param_array(irq
, int, NULL
, 0);
364 module_param_array(mem
, int, NULL
, 0);
365 MODULE_PARM_DESC(io
, "I/O base address(es)");
366 MODULE_PARM_DESC(irq
, "IRQ number(s)");
367 MODULE_PARM_DESC(mem
, "Memory base address(es)");
368 MODULE_DESCRIPTION("Ansel AC3200 EISA ethernet driver");
369 MODULE_LICENSE("GPL");
371 static int __init
ac3200_module_init(void)
373 struct net_device
*dev
;
374 int this_dev
, found
= 0;
376 for (this_dev
= 0; this_dev
< MAX_AC32_CARDS
; this_dev
++) {
377 if (io
[this_dev
] == 0 && this_dev
!= 0)
379 dev
= alloc_ei_netdev();
382 dev
->irq
= irq
[this_dev
];
383 dev
->base_addr
= io
[this_dev
];
384 dev
->mem_start
= mem
[this_dev
]; /* Currently ignored by driver */
385 if (do_ac3200_probe(dev
) == 0) {
386 dev_ac32
[found
++] = dev
;
390 printk(KERN_WARNING
"ac3200.c: No ac3200 card found (i/o = 0x%x).\n", io
[this_dev
]);
398 static void cleanup_card(struct net_device
*dev
)
400 /* Someday free_irq may be in ac_close_card() */
401 free_irq(dev
->irq
, dev
);
402 release_region(dev
->base_addr
, AC_IO_EXTENT
);
403 iounmap(ei_status
.mem
);
406 static void __exit
ac3200_module_exit(void)
410 for (this_dev
= 0; this_dev
< MAX_AC32_CARDS
; this_dev
++) {
411 struct net_device
*dev
= dev_ac32
[this_dev
];
413 unregister_netdev(dev
);
419 module_init(ac3200_module_init
);
420 module_exit(ac3200_module_exit
);
This page took 0.038727 seconds and 5 git commands to generate.